Bridging patients in cardiogenic shock with a paracorporeal pulsatile biventricular assist device to heart transplantation-a single-centre experience

OBJECTIVES

We evaluated the outcome of patients in cardiogenic shock receiving a paracorporeal pulsatile biventricular assist device as a bridge to transplantation.

METHODS

We performed a retrospective single-centre analysis of all patients who received a Berlin Heart Excor® at our institution between 2004 and 2019.

RESULTS

A total of 97 patients (90 adults, 7 paediatric) were analysed. Eighty-four patients were in Interagency Registry for Mechanically Assisted Circulatory Support level 1 (80 adults, 4 paediatric). Diagnoses were dilated cardiomyopathy (n = 41), ischaemic cardiomyopathy (n = 17) or myocardial infarction (n = 4), myocarditis (n = 15), restrictive cardiomyopathy (n = 2), graft failure after heart transplant (n = 7), postcardiotomy heart failure (n = 5), postpartum cardiomyopathy (n = 3), congenital heart disease (n = 1), valvular cardiomyopathy (n = 1) and toxic cardiomyopathy (n = 1). All patients were in biventricular heart failure and had secondary organ dysfunction. The mean duration of support was 63 days (0-487 days). There was a significant decrease in creatinine values after assist device implantation (from 1.83 ± 0.79 to 1.12 ± 0.67 mg/dl, P = 0.001) as well as a decrease in bilirubin values (from 3.94 ± 4.58 to 2.65 ± 3.61 mg/dl, P = 0.084). Cerebral stroke occurred in 16 patients, bleeding in 15 and infection in 13 patients. Forty-eight patients died on support, while 49 patients could be successfully bridged to transplantation. Thirty-day survival and 1-year survival were 70.1% and 41.2%, respectively.

CONCLUSIONS

A pulsatile biventricular assist device is a reasonable therapeutic option in cardiogenic shock, when immediate high cardiac output is necessary to rescue the already impaired kidney and liver function of the patient.

A Mechanistic Lumped Parameter Model of the Berlin Heart EXCOR to Analyze Device Performance and Physiologic Interactions

PURPOSE

The Berlin Heart EXCOR (BH) is the only FDA-approved, extracorporeal pulsatile ventricular assist device (VAD) for infants and children with heart failure. Clinicians control four settings on the device-systolic and diastolic drive pressures, device pump rate, and systolic time as a percentage of the pump cycle. However, interactions between BH pneumatics and the native circulation remain poorly understood. Thus, establishing appropriate device size and settings can be challenging on a patient-to-patient basis.

METHODS

In this study we develop a novel lumped parameter network based on simplified device mechanics. We perform parametric studies to characterize device behavior, study interactions between the left ventricle (LV) and BH across different device settings, and develop patient-specific simulations. We then simulate the impact of changing device parameters for each of three patients.

RESULTS

Increasing systolic pressure and systolic time increased device output. We identified previously unobserved cycle-to-cycle variations in LV-BH interactions that may impact patient health. Patient-specific simulations demonstrated the model's ability to replicate BH performance, captured trends in LV behavior after device implantation, and emphasized the importance of device rate and volume in optimizing BH efficiency.

CONCLUSION

We present a novel, mechanistic model that can be readily adjusted to study a wide range of device settings and clinical scenarios. Physiologic interactions between the BH and the native LV produced large variability in cardiac loading. Our findings showed that operating the BH at a device rate greater than the patient's native heart decreases variability in physiological interactions between the BH and LV, increasing cardiac offloading while maintaining cardiac output. Device rates that are close to the resting heart rate may result in unfavorable cardiac loading conditions. Our work demonstrates the utility of our model to investigate BH performance for patient-specific physiologies.

Review and reflections about pulsatile ventricular assist devices from history to future: concerning safety and low haemolysis-still needed

Since the first use of a ventricular assist device in 1963 many extracorporeal and implantable pulsatile blood pumps have been developed. After the invention of continuous flow blood pumps the implantable pulsatile pumps are not available anymore. The new rotary pumps spend a better quality of life because many of the patients can go home. Nevertheless, the extracorporeal pulsatile pumps have some advantages. They are low-cost systems, produce less haemolysis and heart-recovery can be tested easily. Pump failure is easy to realize because the pumps can be observed visually. Pump exchange can be done easily without any chirurgic surgery. As volume displacement pumps they can produce high blood pressure, so they are the only ones suitable for pediatric patients. Therefore, they are indispensable for clinical use today and in the future. In this work, nearly all pulsatile blood pumps used in clinical life are described.

High-frequency operation of pulsatile ventricular assist devices: A computational study on circular and elliptically shaped pumps

Pulsatile positive displacement pumps as ventricular assist devices were gradually replaced by rotary devices due to their large volume and high adverse event rates. Nevertheless, pulsatile ventricular assist devices might be beneficial with regard to gastrointestinal bleeding and cardiac recovery. Therefore, aim of this study was to investigate the flow field in new pulsatile ventricular assist devices concepts with an increased pump frequency, which would allow lower stroke volumes to reduce the pump size. We developed a novel elliptically shaped pulsatile ventricular assist devices, which we compared to a design based on a circular shape. The pump size was adjusted to deliver similar flow rates at pump frequencies of 80, 160, and 240 bpm. Through a computational fluid dynamics study, we investigated flow patterns, residence times, and wall shear stresses for different frequencies and pump sizes. A pump size reduction by almost 50% is possible when using a threefold pump frequency. We show that flow patterns inside the circular pump are frequency dependent, while they remain similar for the elliptic pump. With slightly increased wall shear stresses for higher frequencies, maximum wall shear stresses on the pump housing are higher for the circular design (42.2 Pa vs 18.4 Pa). The calculated blood residence times within the pump decrease significantly with increasing pump rates. A smaller pump size leads to a slight increase of wall shear stresses and a significant improvement of residence times. Hence, high-frequency operation of pulsatile ventricular assist devices, especially in combination with an elliptical shape, might be a feasible mean to reduce the size, without any expectable disadvantages in terms of hemocompatibility.

Methods for determination of stagnation in pneumatic ventricular assist devices

Background:

A pneumatic paediatric ventricular assist device developed at the Foundation of Cardiac Surgery Development, Zabrze, equipped with valves based on J. Moll’s design, with later modifications introduced at the Institute of Turbomachinery, Lodz University of Technology, was tested numerically and experimentally. The main aim of those investigations was to detect stagnation zones within the ventricular assist device and indicate advantages and limitations of both approaches.

Methods:

In the numerical transient test, a motion of the diaphragm and discs was simulated. Two different methods were used to illustrate stagnation zones in the ventricular assist device. The flow pattern inside the chamber was represented by velocity contours and vectors to validate the results using images obtained in the laser particle image velocimetry experiment.

Results:

The experimental light-based method implied problems with proper illumination of regions in the wall vicinity. High-resolution flow data and other important parameters as stagnation regions or flow patterns in regions not accessible for light in the particle image velocimetry method are derived in the numerical solution. However, computations of a single case are much more time-consuming if compared to a single experiment conducted on a well-calibrated stand.

Conclusion:

The resulting main vortexes in the central part of the pump chamber and the velocity magnitudes are correlated in both methods, which are complementary and when used together offer better insight into the flow structure inside the ventricular assist device and enable a deeper analysis of the results.

Corrugated diaphragm shape design study for hemocompatible pulsatile ventricular assist devices

We aim to maximize the pumping volume of a pulsatile ventricular assist device, where the diaphragm is covered with an endothelial cell layer. These cells are estimated to survive a cyclic strain up to fifteen percent. To increase the pumping volume under this strain constraint we use an approach based on corrugation of the diaphragm in its reference configuration. The paper explains the parametrization scheme for finding corrugation shapes, addresses modeling and evaluation schemes and reports on the results of a parameter study. The results show that corrugated diaphragm shapes are effective for increasing pumping volumes under a strain constraint.

Windkessel model of hemodynamic state supported by a pulsatile ventricular assist device in premature ventricle contraction

Background

Counter-pulsation control (CPC) by ventricular assist devices (VADs) is believed to reduce cardiac load and increase coronary perfusion. However, patients with VADs have a higher risk of arrhythmia, which may cause the CPC to fail. Consequently, CPC has not been applied by VADs in clinical practice. The phase-locked loop (PLL) algorithm for CPC is readily implemented in VADs; however, it requires a normal, consistent heartbeat for adequate performance. When an arrhythmia occurs, the algorithm maintains a constant pumping rate despite the unstable heartbeat. Therefore, to apply the PLL algorithm to CPC, the hemodynamic effects of abnormal heartbeats must be analyzed.

Objectives

This study sought to predict the hemodynamic effects in patients undergoing CPC using VADs, based on electrocardiogram (ECG) data, including a wide range of heart rate (HR) changes caused by premature ventricular contraction (PVC) or other reasons.

Methods

A four-element Windkessel hemodynamic model was used to reproduce the patient’s aortic blood pressure in this study. ECG data from 15 patients with severe congestive heart failure were used to assess the effect of the CPC on the patients’ hemodynamic state. The input and output flow characteristics of the pulsatile VAD (LibraHeart I, Cervika, Korea) were measured using an ultrasound blood flow meter (TS410, Transonic, USA), with the aortic pressure maintained at 80–120 mmHg. All other patient conditions were also reproduced.

Results

In patients with PVCs or normal heartbeats, CPC controlled by a VAD reduced the cardiac load by 20 and 40%, respectively. When the HR was greater for other reasons, such as sinus tachycardia, simultaneous ejection from the heart and VAD was observed; however, the cardiac load was not increased by rapid cardiac contractions resulting from decreased left ventricle volume. These data suggest that the PLL algorithm reduces the cardiac load and maintains consistent hemodynamic changes.