A signal-on photoelectrochemical aptasensor based on ferrocene labeled triple helix DNA molecular switch for detection of antibiotic amoxicillin

A sensitive signal-on photoelectrochemical aptasensor for antibiotic determination was constructed based on the energy level matching between ferrocene and CuInS2. P-type CuInS2 microflower was complexed with reduced graphene oxide (CuInS2/rGO) to get photocathode current with good photoelectric conversion efficiency and stability. Then, hairpin DNA (HP) was covalently bonded to the electrode surface. A triple helix DNA (THMS) was used as a molecular switch. After the specific recognition between target and THMS in homogeneous solution, ferrocene labeled probe (Fc-T2) was released. Finally, Fc-T2 was captured by the HP, which leaded the obvious increase of photocurrent for the energy level matching between ferrocene and CuInS2. The increase of the photocurrent signal was proportional to the concentration of target amoxicillin (AMOX), the linear range was 100 fM-100 nM with detection limit of 19.57 fM. Meanwhile, the method has been successfully applied for milk and lake water samples analysis with satisfactory results.

Proximity hybridization induced molecular machine for signal-on electrochemical detection of α-synuclein oligomers

α-synuclein oligomer is a marker of Parkinson's disease. The traditional enzyme-linked immunosorbent assay for α-synuclein oligomer detection is not conducive to large-scale application due to its time-consuming, high cost and poor stability. Recently, DNA-based biosensors have been increasingly used in the detection of disease markers due to their high sensitivity, simplicity and low cost. In this study, based on the DNAzyme-driven DNA bipedal walking method, we developed a signal-on electrochemical sensor for the detection of α-syn oligomers. Bipedal DNA walkers have a larger walking area and faster walking kinetics, providing higher amplification efficiency compared to conventional DNA walkers. The DNA walker is driven via an Mg2+-dependent DNAzyme, and the binding-induced DNA walker will continuously clamp the MB, resulting in the proliferation of Fc confined near the GE surface. The linear range and limit of detection were 1 fg/mL to 10 pg/mL and 0.57 fg/mL, respectively. The proposed signal-on electrochemical sensing strategy is more selective. It will play a significant role in the sensitive and precise electrochemical analysis of other proteins.

Nanoprecipitated CoPi enhanced photoelectrochemical water oxidation toward sensitive and selective Co2+ detection

The detection of heavy metal ions Co²⁺ is of great significance to the environment and human health. Herein, a simple, highly selective and sensitive photoelectrochemical detection strategy for Co²⁺ was developed based on the enhanced activity by nanoprecipitated CoPi on the Au nanoparticle decorated BiVO₄ electrode. The new photoelectrochemical sensor has a low detection limit of 0.03 μΜ and wide detection range of 0.1-10, and 10-6000 μΜ, with a high selectivity over other metal ions. The Co²⁺ concentration in tap water and commercial drinking water has also been successfully determined with the proposed method. Scanning electrochemical microscopy technique was employed to characterize the photocatalytic performance and heterogenous electron transfer rate of electrodes in situ, further revealing the photoelectrochemical sensing mechanism. Besides determining Co²⁺ concentration, this approach of enhanced catalytic activity by nanoprecipitation can be further extended to develop a variety of electrochemical, photoelectrochemical and optical sensing platforms for many other hazardous ions and biological molecules.

A novel SWCNT-amplified "signal-on" electrochemical aptasensor for the determination of trace level of bisphenol A in human serum and lake water

A novel "signal-on" electrochemical aptasensor was developed for ultrasensitive and specific detection of BPA, using single-walled carbon nanotubes (SWCNT) as the electro-catalytic probe for further signal amplification. The multi-walled carbon nanotubes (MWCNT), amino-functionalized magnetite, and gold nanoparticles (NH₂-Fe₃O₄/Au NPs) were applied first to modify the glassy carbon electrode (GCE) surface and to form a nanomaterial film with satisfactory conductive properties, stability, and biocompatibility. The BPA aptamer was then loaded onto the sensing platform by hybridization with complementary DNA (CDNA). In the presence of BPA it combines with the aptamer and the BPA-aptamer conjugate was released from the electrode;subsequently the added SWCNT and CDNA assembled quickly. Thus, the dual-amplification of the "signal-on" electrochemical aptasensor takes effect. The [Fe (CN)₆]^3-/4- redox probe signal (∆I) detected by DPV (differential pulse voltammetry) is proportional to the negative logarithm of BPA concentration between 10^-19 M and 10^-14 M. The detection limit is 0.08 aM. Importantly, the proposed biosensor represents a successful application for determination of BPA in human serum and lake water. Schematic representation of SWCNT-amplified "signal-on" electrochemical aptasensor for the detection of trace level of bisphenol A in human serum and lake water.

A "signal-on" electrochemical biosensor based on DNAzyme-driven bipedal DNA walkers and TdT-mediated cascade signal amplification strategy

In this work, a dual amplified signal enhancement approach based on coupling deoxyribozyme (DNAzyme)-driven bipedal DNA walkers (BDW) and terminal deoxynucleotidyl transferase (TdT)-mediated DNA elongation signal amplifications has been developed for highly sensitive and label-free electrochemical detection of thrombin in human serums. In presence of thrombin, the BDW complex, which is comprised from the target thrombin and two DNAzyme-containing probes, can exhibit autonomous cleavage behavior on the surface of the substrate DNA (SD) modified electrode, and remove the cleaved DNA fragment from the electrode surface. Subsequently, the TdT can catalyze the elongation of the SD with free 3'-OH termini and formation of many G-quadruplex sequence replicates with the presence of 2'-deoxyaguanosine-5'-triphosphate (dGTP) and adenosine 5'-triphosphate (dATP) at a molar ratio of 6:4. These G-quadruplex sequences bind hemin and generate drastically amplified current response for sensitive detection of thrombin in a "signal-on" and completely label-free fashion. Under optimized conditions, the response peak current was linear with the concentration of thrombin in the range from 0.5 pM to 100000 pM with detection limit of 0.31 pM. This research provides us a sustainable idea for the hyphenated multiple amplification strategies and a stable and effective method for the detection of protein biomarkers.

Photoelectrochemical determination of ractopamine based on inner filter effect between gold nanoparticles and graphitic carbon nitride-copper(II) polyphthalocyanine coupled with 3D DNA stabilizer

Copper(II) polyphthalocyanine (CuPPc) was combined with graphitic carbon nitride (g-C₃N₄) to form a heterojunction with enhanced photoelectrochemical (PEC) signal. A sensitive PEC method was developed for determination of ractopamine based on a PEC inner filter effect between gold nanoparticles (AuNPs) and the g-C₃N₄/CuPPc. A gold electrode was modified with g-C₃N₄/CuPPc and the DNA was linked to the AuNPs. Initially, the PEC signal is weak due to the inner filter effect between the AuNPs and g-C₃N₄/CuPPc. In the presence of ractopamine, it interacts with the aptamer and the complementary chain (C chain) is released. This triggers the entropy-driven cyclic amplification and results in the release of the substrate B chain (SB chain) from three-dimensional DNA stabilizer. The probe is released from the electrode due to the interaction of probe DNA and the SB chain. As a result, the PEC signal increases linearly in the 0.1 pmol·L^-1 to 1000 pmol·L^-1 ractopamine concentration range. The detection limit is 0.03 pM, and the relative standard deviation is 3.4% (at a 10 pmol·L^-1 level; for n = 11). The method has been successfully applied to the determination of ractopamine in pork samples. Graphical abstract Schematic presentation of detection method based on PEC inner filter effect between AuNPs and the g-C₃N₄/CuPPc being fabricated for ractopamine. 3D DNA was used as stabilizer to decrease the PEC blank signal.

An enzyme-free and label-free signal-on aptasensor based on DNAzyme-driven DNA walker strategy

Herein, a signal-on electrochemical aptasensor for highly sensitive detection of thrombin (TB) was constructed based on the DNAzyme-driven DNA walker strategy. We developed a new dual functional hairpin DNA (HP) containing a substrate sequence of the Mg²⁺-dependent DNAzyme (in the loop region) and the G-quadruplex forming segment (in the stem region). The DNA walker (TBA₂-DWs), containing a TB aptamer and an enzymatic sequence, was introduced onto gold electrode (GE) by aptamers-target specific recognition, and thus initiated the enzymatic sequences to hybridize with the substrate sequence. Then, the DNA walker could repeatedly bind and cleave HP in the assistance of Mg²⁺, unlocking many active G-quadruplex forming sequences. Finally, hemin can further bind the G-quadruplex to form G-quadruplex/hemin complexes and generate enhanced current output. The aptasensor for TB assay showed a linear detection range from 1 pM to 60000 pM with a lower detection limit of 0.58 pM. And more, the proposed detection strategy was enzyme-free and label-free.

A label-free and signal-on electrochemiluminescence strategy for sensitive amyloid-beta assay

Development of a simple, cost-effective and sensitive biosensing strategy is highly desirable to advance the applications in Alzheimer's disease diagnosis. In this paper, we present a simple, label-free and signal-on electrochemiluminescence (ECL) aptasensor for the detection of amyloid-beta (Aβ) peptide using luminol as ECL emitter and in-situ generated reactive oxygen species (ROS) as coreactant via catalytic reaction between Cu²⁺-Aβ and the dissolved O₂ in the presence of ascorbic acid (AA). Aβ₁₆, the binding site of Cu²⁺ in the monomeric full-length Aβ, was used as a model in present study. As a result, this signal-on ECL aptasensor has exhibited favorable analytical performance for Aβ₁₆ monomer with a linear range of 1.0 × 10^-13 mol/L-1.0 × 10^-8 mol/L and a limit of detection of 3.5 × 10^-14 mol/L (S/N=3). Furthermore, the proposed biosensor was also able to detect the full length Aβ₄₀ not only in the phosphate buffer saline (PBS) solution but also in human serum. The presented biosensor represents a promising, simple, turn-on and label-free diagnostic tool for blood analysis.

Silver coordination complex amplified electrochemiluminescence sensor for sensitive detection of coenzyme A and histone acetyltransferase activity

A kind of coenzyme A (CoA)-silver coordination complex (CoA-Ag) was in-situ developed and verified to accelerate the electron transferring and electrochemical catalysis of H₂O₂ decomposition to enhance the cathode ECL intensity of CdTe@CdS QDs. Afterward, a convenient label-free signal-on ECL approach was constructed for CoA detection with excellent specificity. In addition, the unique ECL enhancing phenomenon was also proposed to assay the enzymatic activity of histone acetyltransferases (HAT) and screen relevant inhibitors, exhibiting a promising potential in the practical application of biochemical research, disease diagnosis and drug discovery.

A signal-on electrochemical DNA biosensor based on potential-assisted Cu(I)-catalyzed azide-alkyne cycloaddition mediated labeling of hairpin-like oligonucleotide with electroactive probe

A novel electrochemical biosensor was developed for the signal-on detection of sequence-specific DNA by exploiting potential-assisted Cu(I)-catalyzed azide-alkyne cycloaddition (φCuAAC) as an efficient approach for the labeling of hairpin-like oligonucleotide (hairpin) with electroactive probe. The hairpins, dually labeled with thiol and azide at either terminal, were firstly self-assembled on gold electrode and served as the capture probes for the specific recognition of target DNA. Upon hybridization with target DNA, the surface-confined hairpins were unfolded, liberating the azide-containing terminals away from electrode surface. Subsequently, the unfolded hairpins were conveniently and efficiently labeled with ethynylferrocene (EFC) via the φCuAAC. The quantitatively labeled EFC was finally measured via differential pulse voltammetry (DPV) for the signal-on electrochemical detection of sequence-specific DNA. The biosensor presented a good linear response over the range from 1pM to 1nM with a detection limit of 0.62pM. Results also revealed that it was highly specific and held a good detection capability in serum samples. Furthermore, the ability to chemoselectively label hairpin-like oligonucleotide with signal reporter by electrical addressing, together with the simplicity and efficiency of the φCuAAC, makes it compatible with microfluidic devices and microelectrode arrays to achieve the miniaturized and multiplexed detections.

Aptamer/target binding-induced triple helix forming for signal-on electrochemical biosensing

Owing to its diversified structures, high affinity, and specificity for binding a wide range of non-nucleic acid targets, aptamer is a useful molecular recognition tool for the design of various biosensors. Herein, we report a new signal-on electrochemical biosensing platform which is based on an aptamer/target binding-induced strand displacement and triple-helix forming. The biosensing platform is composed of a signal transduction probe (STP) modified with a methylene blue (MB) and a sulfhydryl group, a triplex-forming oligonucleotides probe (TFO) and a target specific aptamer probe (Apt). Through hybridization with the TFO probe and the Apt probe, the self-assembled STP on Au electrode via Au-S bonding keeps its rigid structure. The MB on the STP is distal to the Au electrode surface. It is eT off state. Target binding releases the Apt probe and liberates the end of the MB tagged STP to fold back and form a triplex-helix structure with TFO (STP/TFO/STP), allowing MB to approach the Au electrode surface and generating measurable electrochemical signals (eT ON). As test for the feasibility and universality of this signal-on electrochemical biosensing platform, two aptamers which bind to adenosine triphosphate (ATP) and human α-thrombin (Tmb), respectively, are selected as models. The detection limit of ATP was 7.2 nM, whereas the detection limit of Tmb was 0.86 nM.

Molecular beacon mediated circular strand displacement strategy for constructing a ratiometric electrochemical deoxyribonucleic acid sensor

A novel ratiometric electrochemical sensor for sensitive and selective determination of deoxyribonucleic acid (DNA) had been developed based on signal-on and signal-off strategy. The target DNA hybridized with the loop portion of ferrocene (Fc) labeled hairpin probe immobilized on the gold electrode (GE), the Fc away from the surface of GE and the methylene blue (MB) was attached to an electrode surface by hybridization between hairpin probe and MB labeled primer. Such conformational changes resulted in the oxidation peak current of Fc decreased and that of MB increased, and the changes of dual signals are linear with the concentration of DNA. Furthermore, with the help of strand-displacement polymerization, polymerase catalyzed the extension of the primer and the sequential displacement of the target DNA, which led to the release of target and another polymerization cycle. Thus the circular strand displacement produced the multiplication of the MB confined near the GE surface and Fc got away from the GE surface. Therefore, the recognition of target DNA resulted in both the "signal-off" of Fc and the "signal-on" of MB for dual-signal electrochemical ratiometric readout. The dual signal strategy offered a dramatic enhancement of the stripping response. The dynamic range of the target DNA detection was from 10(-13) to 10(-8) mol L(-1) with a detection limit down to 28 fM level. Compared with the single signaling electrochemical sensor, the dual-signaling electrochemical sensing strategy developed in this paper was more selective. It would have important applications in the sensitive and selective electrochemical determination of other small molecules and proteins.

Single electrode biosensor for simultaneous determination of interferon gamma and lysozyme

Simultaneous detection of multiple biomarkers holds great promise for acute leukemia evaluation. Here, a novel biosensor is developed for simultaneous electrochemical detection of interferon gamma (IFN-γ) and lysozyme (Lys) based on aptamer recognition by coupling "signal-on" and "signal-off" modes. On one Au electrode, two kinds of signaling probes labeled by the thiolated ferrocene (Fc)- and methy blue (MB)- were designed to hybridize with IFN-γ and Lys aptamers respectively to form partial complementary DNA duplexes. In the presence of IFN-γ and Lys, the target-aptamer interaction led to the release of aptamer from duplex DNA structure. The single-stranded signaling probes thus suffered from the conformation changes, which resulted in the decreased (or increased) oxidation peak current of Fc (or MB) according to the "signal-off (or signal-on)" mode. Electrodes were characterized using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Under the optimized conditions, the signal changes were quantified using square wave voltammetry (SWV). This proposed biosensor for IFN-γ and Lys possessed linear detection range from 0.01 to 10 nM and 0.1 to 100 nM, with the detection limits of 1.14×10(-3) nM and 0.0164 nM, respectively. Moreover, this biosensor was readily regenerated and proved successful toward the practical analysis. The proposed strategy could provide more integrated and reliable information for acute leukemia evaluation.

Ultrasensitive electrochemiluminescent aptasensor for ochratoxin A detection with the loop-mediated isothermal amplification

In this study, we for the first time presented an efficient, accurate, rapid, simple and ultrasensitive detection system for small molecule ochratoxin A (OTA) by using the integration of loop-mediated isothermal amplification (LAMP) technique and subsequently direct readout of LAMP amplicons with a signal-on electrochemiluminescent (ECL) system. Firstly, the dsDNA composed by OTA aptamer and its capture DNA were immobilized on the electrode. After the target recognition, the OTA aptamer bond with target OTA and subsequently left off the electrode, which effectively decreased the immobilization amount of OTA aptamer on electrode. Then, the remaining OTA aptamers on the electrode served as inner primer to initiate the LAMP reaction. Interestingly, the LAMP amplification was detected by monitoring the intercalation of DNA-binding Ru(phen)3(2+) ECL indictors into newly formed amplicons with a set of integrated electrodes. The ECL indictor Ru(phen)3(2+) binding to amplicons caused the reduction of the ECL intensity due to the slow diffusion of Ru(phen)3(2+)-amplicons complex to the electrode surface. Therefore, the presence of more OTA was expected to lead to the release of more OTA aptamer, which meant less OTA aptamer remained on electrode for producing LAMP amplicons, resulting in less Ru(phen)3(2+) interlaced into the formed amplicons within a fixed Ru(phen)3(2+) amount with an obviously increased ECL signal input. As a result, a detection limit as low as 10 fM for OTA was achieved. The aptasensor also has good reproducibility and stability.