Design and development of dual drug-loaded nanofibrous inserts for ophthalmic sustained delivery of AMK and VAN: Pharmacokinetic study in rabbit's eye

Bacterial corneal keratitis is a damage to the corneal tissue that if not treated, can cause various complications like severe vision loss or even blindness. Combination therapy with two antibiotics which are effective against Gram-positive and Gram-negative bacteria offers sufficient broad-spectrum antibiotic coverage for the treatment of keratitis. Nanofibers can be a potential carrier in dual drug delivery due to their structural characteristics, specific surface area and high porosity. In order to achieve a sustained delivery of amikacin (AMK) and vancomycin (VAN), the current study designed, assessed, and compared nanofibrous inserts utilizing polyvinyl alcohol (PVA) and polycaprolactone (PCL) as biocompatible polymers. Electrospinning method was utilized to prepare two different formulations, PVA-VAN/AMK and PCL/PVA-VAN/AMK, with 351.8 ± 53.59 nm and 383.85 ± 49 nm diameters, respectively. The nanofibers were simply inserted in the cul-de-sac as a noninvasive approach for in vivo studies. The data obtained from the physicochemical and mechanical properties studies confirmed the suitability of the formulations. Antimicrobial investigations showed the antibacterial properties of synthesized nanofibers against Staphylococcus aureus and Pseudomonas aeruginosa. Both in vitro and animal studies demonstrated sustained drug release of the prepared nanofibers for 120 h. Based on the in vivo findings, the prepared nanofibers' AUC0-120 was found to be 20 to 31 times greater than the VAN and AMK solutions. Considering the results, the nanofibrous inserts can be utilized as an effective and safe system in drug delivery.

Novel nano-in-micro fabrication technique of diclofenac nanoparticles loaded microneedle patches for localised and systemic drug delivery

Diclofenac, a nonsteroidal anti-inflammatory drug, is commonly prescribed for managing osteoarthritis, rheumatoid arthritis, and post-surgical pain. However, oral administration of diclofenac often leads to adverse effects. This study introduces an innovative nano-in-micro approach to create diclofenac nanoparticle-loaded microneedle patches aimed at localised, sustained pain relief, circumventing the drawbacks of oral delivery. The nanoparticles were produced via wet-milling, achieving an average size of 200 nm, and then incorporated into microneedle patches. These patches showed improved skin penetration in ex vivo tests using Franz-cell setups compared to traditional diclofenac formulations. In vivo tests on rats revealed that the nanoparticle-loaded microneedle patches allowed for quick drug uptake and prolonged release, maintaining drug levels in tissues for up to 72 h. With a systemic bioavailability of 57 %, these patches prove to be an effective means of transdermal drug delivery. This study highlights the potential of this novel microneedle delivery system in enhancing the treatment of chronic pain with reduced systemic side effects.

Concurrent application of interferon-gamma and vincristine inhibits tumor growth in an orthotopic neuroblastoma mouse model

PURPOSE

Tumor-associated macrophages are present within neuroblastoma, and interferon-gamma (IFN-γ) can polarize macrophages into cancer-inhibiting M1 type. We hypothesize that treating neuroblastoma with interferon-gamma (IFN-γ) can suppress tumor growth, and the concurrent treatment with IFN-γ and vincristine can lead to enhanced tumor killing as compared to vincristine alone.

METHODS

We loaded IFN-γ or vincristine into silk biomaterials and recorded the amount released over time. Orthotopic, syngeneic neuroblastoma xenografts were generated by injecting 9464D cells into adrenal gland of C57BL/6 mice, and IFN-γ-loaded and/or vincristine-loaded silk biomaterials were implanted into the tumor once the tumors reached 100 mm³. Drug release at different timepoints was measured and tumor growth after different treatments were compared.

RESULTS

1-2% of IFN-γ and 70% of vincristine were released from the biomaterials by the fifth day. Combining IFN-γ and vincristine significantly slowed tumor growth as compared to the controls (12.2 ± 2.7 days to reach 800 mm³ versus 5.7 ± 1.2 days, p = 0.01), and IFN-γ alone also delayed tumor growth as compared to the controls (10.9 ± 1.5 days versus 5.7 ± 1.2 days, p = 0.001). Hematoxylin and eosin staining demonstrated tumor necrosis adjacent to the drug-loaded silk biomaterials.

CONCLUSION

Local delivery of sustained release IFN-γ can inhibit neuroblastoma tumor growth by itself and in combination with vincristine.

Sustained antigens delivery using composite microneedles for effective epicutaneous immunotherapy

Allergen-specific immunotherapy (SIT) is a desirable way of therapy for various allergic diseases such as food allergy (FA). However, frequent visits for more than 3 years and potential adverse effects often hinder patient compliance. Recently, many researchers started focusing on microneedles (MNs) as a new method for SIT. In this study, we proposed an implantable MNs system produced by a two-step casting process, consisting of OVA (antigen)-loaded silk microneedles and a dissolvable, flexible polyvinyl alcohol (PVA) pedestal. Different from PVA, silk fibroin hydrogel has preferable vaccine release ability in vivo and in vitro. Once MNs are inserted into the skin, the PVA pedestal can dissolve in the interstitial fluid of the excised skin within 5 min and implant the OVA-loaded silk microneedle tips in dermal layer as a sustained antigen depot, thus inducing long-lasting immune response for at least 2 weeks. After receiving 3 doses of MN-based immunotherapy, the immune response in OVA-sensitized mice was successfully suppressed, with no apparent side effects. Compared to conventional subcutaneous immunotherapy (total dose of 150 [Formula: see text]g), MN immunotherapy ameliorated systemic anaphylaxis more effectively even at a lower dose (total dose of 30 [Formula: see text]g), demonstrating the antigen dose-sparing potential of the proposed MNs. Moreover, due to the prolonged release effect of silk-PVA composite MNs, the frequency of immunotherapy can be significantly reduced. To sum up, through prolonged skin exposure to antigen, this implantable designed MN may offer a new therapeutic strategy for FA treatment with significant improvements in efficacy and convenience. Schematic illustration of silk-PVA composite microneedles, consisting of OVA (antigen)-loaded silk microneedles and a dissolvable, flexible PVA pedestal. Once inserted into the skin, the PVA pedestal can dissolve in the interstitial fluid of the excised skin within 5 min. Subsequently, the OVA-loaded silk microneedle tips were implanted in the dermal layer as a sustained antigen depot and induced long-lasting immune response. This MNs-based immunotherapy can significantly modulate the Th1/Th2 imbalance of sensitized mice.

Long-acting vaccine delivery systems

Bolus vaccines are often administered multiple times due to rapid clearance and reduced transportation to draining lymph nodes resulting in inadequate activation of T and B lymphocytes. In order to achieve adaptive immunity, prolonged exposure of antigens to these immune cells is crucial. Recent research has been focusing on developing long-acting biomaterial-based vaccine delivery systems, which can modulate the release of encapsulated antigens or epitopes to facilitate enhanced antigen presentation in lymph nodes and subsequently achieve robust T and B cell responses. Over the past few years, various polymers and lipids have been extensively explored to develop effective biomaterial-based vaccine strategies. The article reviews relevant polymer and lipid-based strategies used to prepare long-acting vaccine carriers and discusses their results concerning immune responses.

Al3+/Ca2+ cross-linked hydrogel matrix tablet of etherified tara gum for sustained delivery of tramadol hydrochloride in gastrointestinal milieu

Tara gum (TG) was derivatized to carboxymethyl TG (CMTG) and then cross-linked with Al³⁺/Ca²⁺ ions to prepare Al/Ca cross-linked CMTG matrices for sustained delivery of Tramadol Hydrochloride (TH), a highly water-soluble drug. The effect of Al³⁺/Ca²⁺ ions concentration on swelling, erosion, and drug release behavior from Al/Ca-CMTG matrices was investigated. Al-CMTG matrices had greater cross-linking density, produced a more rigid and denser hydrogel layer than Ca-CMTG matrices. The rate of swelling, erosion, and in vitro drug release from Al-CMTG matrices was slower than from Ca-CMTG matrices. The most important finding of our study indicated that at the same concentration of cross-linking ions, the release of TH from Al-CMTG matrices was slower compared to Ca-CMTG matrices. The optimized formulation containing 9 % w/w AlCl₃ in CMTG matrices released TH in a sustained manner up to 12 h in the gastrointestinal milieu. Moreover, it was observed that the prepared optimized formulation exhibited a more sustained release of TH compared to the marketed product.

Injectable hydrogels for sustained delivery of extracellular vesicles in cartilage regeneration

Extracellular vesicles (EVs) are a population of small vesicles secreted by essentially all cell types, containing a wide variety of biological macromolecules. Due to their intrinsic capabilities for efficient intercellular communication, they are involved in various aspects of cellular functioning. In the past decade, EVs derived from stem cells attracted interest in the field of regenerative medicine. Owing to their regenerative properties, they have great potential for use in tissue repair, in particular for tissues with limited regenerative capabilities such as cartilage. The maintenance of articular cartilage is dependent on a precarious balance of many different components that can be disrupted by the onset of prevalent rheumatic diseases. However, while cartilage is a tissue with strong mechanical properties that can withstand movement and heavy loads for years, it is virtually incapable of repairing itself after damage has occurred. Stem cell-derived EVs (SC-EVs) transport regenerative components such as proteins and nucleic acids from their parental cells to recipient cells, thereby promoting cartilage healing. Many possible pathways through which SC-EVs execute their regenerative function have been reported, but likely there are still numerous other pathways that are still unknown. This review discusses various preclinical studies investigating intra-articular injections of free SC-EVs, which, while often promoting chondrogenesis and cartilage repair in vivo, showed a recurring limitation of the need for multiple administrations to achieve sufficient tissue regeneration. Potentially, this drawback can be overcome by making use of an EV delivery platform that is capable of sustainably releasing EVs over time. With their remarkable versatility and favourable chemical, biological and mechanical properties, hydrogels can facilitate this release profile by encapsulating EVs in their porous structure. Ideally, the optimal delivery platform can be formed in-situ, by means of an injectable hydrogel that can be administered directly into the affected joint. Relevant research fulfilling these criteria is discussed in detail, including the steps that still need to be taken before injectable hydrogels for sustained delivery of EVs can be applied in the context of cartilage regeneration in the clinic.

Both non-coated and polyelectrolytically-coated intraocular collagen-alginate composite gels enhanced photoreceptor survival in retinal degeneration

Treatments of vision-threatening retinal diseases are often hampered by drug delivery difficulties. Polyelectrolytically-coated alginate encapsulated-cell therapy (ECT) systems have shown therapeutic efficacy through prolonged in vivo drug delivery but still face various biocompatibility, viability, drug delivery and mechanical stability issues in clinical trials. Here, novel, injectable alginate-poly-l-lysine (AP)-coated composite alginate-collagen (CAC) ECT gels were developed for sustained ocular drug delivery, and their long-term performance was compared with non-coated CAC ECT gels. All optimised AP-coated gels (AP1- and AP5.5-CAC ECT: 2 mg/ml collagen, 1.5% high molecular weight alginate, 50,000 cells/gel, with 0.01% or 0.05% poly-l-lysine coating for 5 min, followed by 0.15% alginate coating) and non-coated gels showed effective cell proliferation control, cell viability support and continuous delivery of bioactive glial cell-derived neurotrophic factor (GDNF) with no significant gel degradation in vitro and in rat vitreous. Most importantly, intravitreally injected gels demonstrated therapeutic efficacy in Royal College of Surgeons rats with retinal degeneration, resulting in reduced photoreceptor apoptosis and retinal function loss. At 6 months post-implantation, no host-tissue attachment or ingrowth was detected on the retrieved gels. Non-coated gels were mechanically more stable than AP5.5-coated ones under the current cell loading. This study demonstrated that both coated and non-coated ECT gels can serve as well-controlled, sustained drug delivery platforms for treating posterior eye diseases without immunosuppression.

Development of 3D-printed subcutaneous implants using concentrated polymer/drug solutions

Implantable drug-eluting devices that provide therapeutic cover over an extended period of time following a single administration have potential to improve the treatment of chronic conditions. These devices eliminate the requirement for regular and frequent drug administration, thus reducing the pill burden experienced by patients. Furthermore, the use of modern technologies, such as 3D printing, during implant development and manufacture renders this approach well-suited for the production of highly tuneable devices that can deliver treatment regimens which are personalised for the individual. The objective of this work was to formulate subcutaneous implants loaded with a model hydrophobic compound, olanzapine (OLZ) using robocasting - a 3D-printing technique. The formulated cylindrical implants were prepared from blends composed of OLZ mixed with either poly(caprolactone) (PCL) or a combination of PCL and poly(ethylene)glycol (PEG). Implants were characterised using scanning electron microscopy (SEM), thermal analysis, infrared spectroscopy, and X-ray diffraction and the crystallinity of OLZ in the formulated devices was confirmed. In vitro release studies demonstrated that all the formulations were capable of maintaining sustained drug release over a period of 200 days, with the maximum percentage drug release observed to be c.a. 60 % in the same period.

Injectable recombinant block polymer gel for sustained delivery of therapeutic protein in post traumatic osteoarthritis

Protein-based biomaterials offer several advantages over synthetic materials, owing to their unique stimuli-responsive properties, biocompatibility and modular nature. Here, we demonstrate that E5C, a recombinant protein block polymer, consisting of five repeats of elastin like polypeptide (E) and a coiled-coil domain of cartilage oligomeric matrix protein (C), is capable of forming a porous networked gel at physiological temperature, making it an excellent candidate for injectable biomaterials. Combination of E5C with Atsttrin, a chondroprotective engineered derivative of anti-inflammatory growth factor progranulin, provides a unique biochemical and biomechanical environment to protect against post-traumatic osteoarthritis (PTOA) onset and progression. E5C gel was demonstrated to provide prolonged release of Atsttrin and inhibit chondrocyte catabolism while facilitating anabolic signaling in vitro. We also provide in vivo evidence that prophylactic and therapeutic application of Atsttrin-loaded E5C gels protected against PTOA onset and progression in a rabbit anterior cruciate ligament transection model. Collectively, we have developed a unique protein-based gel capable of minimally invasive, sustained delivery of prospective therapeutics, particularly the progranulin-derivative Atsttrin, for therapeutic application in OA.

Targeted oral peptide delivery using multi-unit particulates: Drug and permeation enhancer layering approach

Oral delivery of peptides is a challenge due to their instability and their limited transport and absorption characteristics within the gastrointestinal tract. In this work, we used layering techniques in a fluidized bed dryer to create a configuration in which the active peptide, permeation enhancers, and polymers are coated to control the release of the peptide. Formulations were developed to disintegrate at pH values of 5.5 and 7.0. In addition, sustained-release or mucoadhesive polymers were coated to trigger release at a desired site in the gastrointestinal tract. Dissolution studies with a USP Type I (basket) apparatus confirmed the duration of release. Pharmacokinetic studies were performed in beagle dogs to evaluate bioavailability. A high-disintegration pH was found to be advantageous in enhancing bioavailability.

Controlled delivery of bone morphogenic protein-2-related peptide from mineralised extracellular matrix-based scaffold induces bone regeneration

Ideal bone tissue engineering scaffolds composed of extracellular matrix (ECM) require excellent osteoconductive ability to imitate the bone environment. We developed a mineralised tissue-derived ECM-modified true bone ceramic (TBC) scaffold for the delivery of aspartic acid-modified bone morphogenic protein-2 (BMP-2) peptide (P28) and assessed its osteogenic capacity. Decellularized ECM from porcine small intestinal submucosa (SIS) was coated onto the surface of TBC, followed by mineralisation modification (mSIS/TBC). P28 was subsequently immobilised onto the scaffolds in the absence of a crosslinker. The alkaline phosphatase activity and other osteogenic differentiation marker results showed that osteogenesis of the P28/mSIS/TBC scaffolds was significantly greater than that of the TBC and mSIS/TBC groups. In addition, to examine the osteoconductive capability of this system in vivo, we established a rat calvarial bone defect model and evaluated the new bone area and new blood vessel density. Histological observation showed that P28/mSIS/TBC exhibited favourable bone regeneration efficacy. This study proposes the use of mSIS/TBC loaded with P28 as a promising osteogenic scaffold for bone tissue engineering applications.

A hypotonic gel-forming eye drop provides enhanced intraocular delivery of a kinase inhibitor with melanin-binding properties for sustained protection of retinal ganglion cells

While eye drops are the most common ocular dosage form, eye drops for treating diseases of the posterior segment (retina, choroid, optic nerve) have yet to be developed. In glaucoma, eye drops are used extensively for delivering intraocular pressure (IOP)-lowering medications to the anterior segment. However, degeneration of retinal ganglion cells (RGCs) in the retina may progress despite significant IOP lowering, suggesting that a complementary neuroprotective therapy would improve glaucoma management. Here, we describe a hypotonic, thermosensitive gel-forming eye drop for effective delivery of sunitinib, a protein kinase inhibitor with activity against the neuroprotective targets dual leucine zipper kinase (DLK) and leucine zipper kinase (LZK), to enhance survival of RGCs after optic nerve injury. Further, binding of sunitinib to melanin in the pigmented cells in the choroid and retinal pigment epithelium (RPE) led to prolonged intraocular residence time, including therapeutically relevant concentrations in the non-pigmented retinal tissue where the RGCs reside. The combination of enhanced intraocular absorption provided by the gel-forming eye drop vehicle and the intrinsic melanin binding properties of sunitinib led to significant protection of RGCs with only once weekly eye drop dosing. For a chronic disease such as glaucoma, an effective once weekly eye drop for neuroprotection could result in greater patient adherence, and thus, greater disease management and improved patient quality of life.

Hydrogel microspheres for spatiotemporally controlled delivery of RNA and silencing gene expression within scaffold-free tissue engineered constructs

Delivery systems for controlled release of RNA interference (RNAi) molecules, including small interfering (siRNA) and microRNA (miRNA), have the potential to direct stem cell differentiation for regenerative musculoskeletal applications. To date, localized RNA delivery platforms in this area have focused predominantly on bulk scaffold-based approaches, which can interfere with cell-cell interactions important for recapitulating some native musculoskeletal developmental and healing processes in tissue regeneration strategies. In contrast, scaffold-free, high density human mesenchymal stem cell (hMSC) aggregates may provide an avenue for creating a more biomimetic microenvironment. Here, photocrosslinkable dextran microspheres (MS) encapsulating siRNA-micelles were prepared via an aqueous emulsion method and incorporated within hMSC aggregates for localized and sustained delivery of bioactive siRNA. siRNA-micelles released from MS in a sustained fashion over the course of 28 days, and the released siRNA retained its ability to transfect cells for gene silencing. Incorporation of fluorescently labeled siRNA (siGLO)-laden MS within hMSC aggregates exhibited tunable siGLO delivery and uptake by stem cells. Incorporation of MS loaded with siRNA targeting green fluorescent protein (siGFP) within GFP-hMSC aggregates provided sustained presentation of siGFP within the constructs and prolonged GFP silencing for up to 15 days. This platform system enables sustained gene silencing within stem cell aggregates and thus shows great potential in tissue regeneration applications. STATEMENT OF SIGNIFICANCE: This work presents a new strategy to deliver RNA-nanocomplexes from photocrosslinked dextran microspheres for tunable presentation of bioactive RNA. These microspheres were embedded within scaffold-free, human mesenchymal stem cell (hMSC) aggregates for sustained gene silencing within three-dimensional cell constructs while maintaining cell viability. Unlike exogenous delivery of RNA within culture medium that suffers from diffusion limitations and potential need for repeated transfections, this strategy provides local and sustained RNA presentation from the microspheres to cells in the constructs. This system has the potential to inhibit translation of hMSC differentiation antagonists and drive hMSC differentiation toward desired specific lineages, and is an important step in the engineering of high-density stem cell systems with incorporated instructive genetic cues for application in tissue regeneration.

Improving carvacrol bioaccessibility using core-shell carrier-systems under simulated gastrointestinal digestion

The impact of encapsulating carvacrol in chitosan-albumin based core-shell nano-carriers (NCs) on its stability and bioaccessibility was determined under simulated digestion conditions. These NCs consisted of chitosan (C) core enclosed by bovine serum albumin (BSA) shell. The mean particle size ranged from 52.4 ± 10 nm to 203 ± 6 nm and zeta-potential from + 21 ± 3.6 to -18 ± 2.7 mV. The size and charge were significantly modified after the protein-shell formation around the polysaccharide-core. Core-shell NCs were more stable, with less aggregation under simulated gastrointestinal conditions than C-NCs, presumably due to greater steric repulsion. Likewise, core-shell NCs were observed relatively more stabilized in the intestinal phase than gastric phase. The bioaccessibility of carvacrol was enhanced significantly when it was encapsulated in the core-shell NCs. These findings imply that C-BSA based core-shell NCs might be an efficient means of encapsulating, protecting and delivering hydrophobic bioactive compounds for applications in functional foods.

Tuning multilayered polymeric self-standing films for controlled release of L-lactate by electrical stimulation

We examine different approaches for the controlled release of L-lactate, which is a signaling molecule that participates in tissue remodeling and regeneration, such as cardiac and muscle tissue. Robust, flexible, and self-supported 3-layers films made of two spin-coated poly(lactic acid) (PLA) layers separated by an electropolymerized poly(3,4-ethylenedioxythiophene) (PEDOT) layer, are used as loading and delivery systems. Films with outer layers prepared using homochiral PLA and with nanoperforations of diameter 146 ± 70 experience more bulk erosion, which also contributes to the release of L-lactic acid, than those obtained using heterochiral PLA and with nanoperforations of diameter 66 ± 24. Moreover, the release of L-lactic acid as degradation product is accelerated by applying biphasic electrical pulses. The four approaches used for loading extra L-lactate in the 3-layered films were: incorporation of L-lactate at the intermediate PEDOT layer as primary dopant agent using (1) organic or (2) basic water solutions as reaction media; (3) substitution at the PEDOT layer of the ClO₄^- dopant by L-lactate using de-doping and re-doping processes; and (4) loading of L-lactate at the outer PLA layers during the spin-coating process. Electrical stimuli were applied considering biphasic voltage pulses and constant voltages (both negative and positive). Results indicate that the approach used to load the L-lactate has a very significant influence in the release regulation process, affecting the concentration of released L-lactate up to two orders of magnitude. Among the tested approaches, the one based on the utilization of the outer layers for loading, approach (4), can be proposed for situations requiring prolonged and sustained L-lactate release over time. The biocompatibility and suitability of the engineered films for cardiac tissue engineering has also been confirmed using cardiac cells.

Microsphere antioxidant and sustained erythropoietin-R76E release functions cooperate to reduce traumatic optic neuropathy

Wild-type erythropoietin (EPO) is promising for neuroprotection, but its therapeutic use is limited because it causes a systemic rise in hematocrit. We have developed an EPO-R76E derivative that maintains neuroprotective function without effects on hematocrit, but this protein has a short half-life in vivo. Here, we compare the efficacy and carrier-induced inflammatory response of two polymeric microparticle (MP) EPO-R76E sustained release formulations based on conventional hydrolytically degradable poly(lactic-co-glycolic acid) (PLGA) and reactive oxygen species (ROS)-degradable poly(propylene sulfide) (PPS). Both MP types effectively loaded EPO-R76E and achieved sustained release, providing detectable levels of EPO-R76E at the injection site in the eye in vivo for at least 28 days. Testing in an in vitro oxidative stress assay and a mouse model of blast-induced indirect traumatic optic neuropathy (bITON) showed that PPS and PLGA MP-mediated delivery of EPO-R76E provided therapeutic protection. While unloaded PLGA MPs inherently increase levels of pro-inflammatory cytokines in the bITON model, drug-free PPS MPs have innate antioxidant properties that provide therapeutic benefit both in vitro and in vivo. Both PLGA and PPS MPs enabled sustained release of EPO-R76E, providing therapeutic benefits including reduction in inflammation and axon degeneration, and preservation of visual function as measured by electroretinogram. The PPS-based MP platform is especially promising for further development, as the delivery system provides inherent antioxidant benefits that can be harnessed to work in complement with EPO-R76E or other drugs for neuroprotection in the setting of traumatic eye injury.

Pharmacokinetics of a weekly transdermal delivery system of tenofovir alafenamide in hairless rats

Tenofovir alafenamide (TAF) is a potent prodrug of tenofovir (TFV) for HIV prophylaxis, and HIV and HBV treatment. Compared to oral daily doses, transdermal administration of TAF may be more advantageous for long-term adherence by offering sustained drug delivery and reduced dosing frequency. Here, we described the plasma pharmacokinetics (PK) of an optimized once-weekly suspension transdermal delivery system (TDS) for TAF (96 mg/25 cm² of TDS) in female hairless rats. Over the study period, the TAF TDS delivered an overall low level of TAF (median: 1.43 [0.02-3.28] ng/mL) and a sustained level of the stable metabolite and parent drug, TFV. Relative to the projected exposure corresponding to six-day oral daily doses, a comparable TAF exposure but a substantially lower TFV exposure was resulted from the TAF TDS, suggesting a lower risk of TFV-associated adverse effects. TAF, TFV, and phosphorylated TFVs (TFV-monophosphate and diphosphate) were found distributed in vaginal tissue, the portal of entry for HIV during male-to-female sexual transmission. Skin adhesion and tolerance were acceptable given the animal model used. PK evaluation of the TAF TDS in hairless rats demonstrates the proof of concept that transdermal delivery can be an alternative route for a sustained, once-weekly systemic delivery of TAF.

Injectable biomaterials for delivery of interleukin-1 receptor antagonist: Toward improving its therapeutic effect

Interleukin-1 receptor antagonist (IL-1Ra) is a naturally occurring anti-inflammatory cytokine that inhibits IL-1 activity and has been proposed to treat a wide variety of systemic and local inflammatory pathologies for multiple decades. However, the short half-life and high concentration required to inhibit IL-1 activity has limited its use in clinical applications. Many strategies have been developed with the goal of improving the therapeutic efficacy of IL-1Ra for a variety of pathologies, including fusing IL-1Ra to protein/peptide/polymer partners, releasing IL-1Ra from injectable polymer or mineral particles, and release of IL-1Ra from injectable coacervates and gels. This literature review examines injectable biomaterials engineered to improve IL-1Ra delivery, both locally and systemically, to increase its efficacy and ease of use in clinic. STATEMENT OF SIGNIFICANCE: Interleukin-1 receptor antagonist (IL-1Ra) is a therapeutic protein with the potential to treat numerous inflammatory conditions and diseases. However, its short biological half-life and high therapeutic concentration may limit its utility in all but a few clinical scenarios. In this review, we present the biomaterial based delivery strategies which have been explored to deliver IL-1Ra to improve its efficacy and applicability to treat inflammation.

Formulation and preclinical evaluation of a toll-like receptor 7/8 agonist as an anti-tumoral immunomodulator

The toll-like receptor 7 and 8 (TLR7/8) agonist Resiquimod (R848) has been recognized as a promising immunostimulator for the treatment of cutaneous cancers in multiple clinical trials. However, systemic administration of R848 often results in strong immune-related toxicities while having limited therapeutic effects to the tumor. In the present study, a prodrug-based nanocarrier delivery system was developed that exhibited high therapeutic efficiency. R848 was conjugated to α-tocopherol to constitute an R848-Toco prodrug, followed by formulating with a tocopherol-modified hyaluronic acid (HA-Toco) as a polymeric nano-suspension. In vitro evaluation showed that the delivery system prolonged the release kinetics while maintaining TLR agonist activities. When administered subcutaneously, the nano-suspension formed a depot at the injection site, inducing localized immune responses without systemic expansion. This formulation also suppressed tumor growth and recruited immune cells to the tumor in a murine model of head and neck cancer. In a preclinical canine study of spontaneous mast cell tumors, the treatment led to a 67% response rate (three partial remissions and one complete remission).

Bimatoprost loaded nanovesicular long-acting sub-conjunctival in-situ gelling implant: In vitro and in vivo evaluation

Primary treatment for glaucoma relies on chronic instillation (daily) of intraocular pressure (IOP) lowering eye drops. Present study tends to develop and assess a novel sustained release bimatoprost loaded nanovesicular (BMT-NV) - thermosensitive in-situ gelling implant (BMT-NV-GEL-IM), for subconjunctival delivery. BMT-NVs developed using novel composition and method of preparation, (IPA/700/DEL/2014) and industrially viable methodology were characterized and evaluated comprehensively for ocular suitability. Their incorporation into an in-situ gelling formula was safe (in vitro and in vivo) and stable upon sterilization. Autoclavability was an important consideration, as a preservative-free, single-use BMT-NV-GEL-IM will avoid side- effects associated with repetitive application of drops containing preservatives like benzalkonium chloride (BAK). An extended in vitro release of BMT (80.23%) was observed for 10 days while the IOP lowering effect extended over 2 months with single subconjunctival injection of BMT-NV-GEL-IM in rats. No clinical signs of irritation, inflammation, or infection were observed in any injected eye, throughout the study, as also confirmed by histology. Furthermore, single administration of BMT-NV-GEL as topical drop lowered the IOP over 5 days. Presence of significant diffuse fluorescence in confocal microscopy of internal eye tissues post-in vivo application, as subconjunctival implant, even after 2 month and eye drops upto1 week provide direct evidence of successful sustained delivery. We thus provide an improved modality for antiglaucoma medication in patients who are challenged to adhere to a regimen of daily eye drops.

Long-acting intraocular Delivery strategies for biological therapy of age-related macular degeneration

As one of the leading causes of central vision loss in elderly population, worldwide cases of age-related macular degeneration (AMD) have seen a dramatic increase over the past several years. Treatment regimens for AMD, especially with biological agents, are complicated due to anatomical and physiological barriers, as well as administration of high doses and frequent regimens. Some clinical examples include monthly intravitreal administration of anti-VEGF antibody ranibizumab (Lucentis®) from Genentech and aflibercept (Eylea®) from Regeneron Pharmaceuticals. Long-acting sustained intraocular drug delivery provides promising solutions, such as Vitrasert® from Bausch & Lomb, an intravitreal biodegradable polymeric implant made from poly(D,L-lactic co glycolic acid) (PLGA), and can be used as a guiding reference to formulate sustained delivery systems. In this review, we discuss the anatomy and physiology of the eye, barriers to delivery, pathology of AMD, opportunities for biological therapeutics, and future prospects of intraocular delivery strategies that are in development for treatment of AMD.

Design and in vivo evaluation of entecavir-3-palmitate microcrystals for subcutaneous sustained delivery

The objectives of this study were to formulate microcrystals of entecavir-3-palmiate (EV-P), a palmitic acid ester of entecavir (EV), and evaluate the influence of particle size on its pharmacokinetic behavior following subcutaneous (SC) injection. Systemic toxicity and local tolerability of the hepatitis B anti-viral suspension were further evaluated in normal rats. EV-P microcrystals possessing median diameters of 2.1, 6.3, and 12.7 µm were fabricated using anti-solvent crystallization technique with polysorbate 20 and polyethylene glycol 4000 as steric stabilizer. Dissolution rate of EV-P microcrystals was controlled by adjusting the particle size, under sink condition. Pharmacokinetic profiles of 2.1 µm-sized and 6.3 µm-sized EV-P microcrystals were quite comparable (1.44 mg/kg as EV), over 46 days in rats. The absorption rate and extent of EV after SC injection of 12.7 µm-sized microcrystals were significantly retarded, due to its slower dissolution rate in aqueous media. No single-dose systemic toxicity was observed after SC injection of high dose of EV-P microcrystal suspension (30-300 mg/kg as EV). The microcrystals were tolerable in the injected site, showing mild inflammatory responses at a dose of 30 mg/kg. Therefore, the novel microcrystal system with median particle size of below 6.3 µm is expected to be a unique long-acting system of the anti-viral agent, improving patient's compliance with chronic disease.

Enhancing immunogenicity of antigens through sustained intradermal delivery using chitosan microneedles with a patch-dissolvable design

Reducing the dosage required for vaccination is highly desirable, particularly in cases of epidemic emergencies. This study evaluated the potential of a chitosan microneedle (MN) system with a patch-dissolvable design for low-dose immunization. This system comprises antigen-loaded chitosan MNs and a hydrophilic polyvinyl alcohol/polyvinyl pyrrolidone supporting array patch, which provides extra strength to achieve complete MN insertion and then quickly dissolves in the skin to reduce patch-induced skin irritation. After insertion, MNs could be directly implanted in the dermal layer as an intradermal (ID) depot to allow a sustained release of the model antigen ovalbumin (OVA) for up to 28 days. We found that rats immunized with MNs containing low-dose OVA (approximately 200 μg) had persistently high antibody levels for 18 weeks, which were significantly higher than those observed after an intramuscular injection of full-dose OVA (approximately 500 μg), demonstrating at least 2.5-fold dose sparing. Moreover, OVA-encapsulated chitosan MNs had superior immunogenicity to OVA plus chitosan solution, indicating that MN-based delivery and prolonged skin exposure can further enhance chitosan's adjuvanticity. Therefore, this patch-dissolvable MN system offers a needle-free, accurate, and reliable ID delivery of antigens and has potential as a sustained ID delivery device to improve vaccine efficacy and facilitate dose sparing with existing vaccines.

STATEMENT OF SIGNIFICANCE

This study developed implantable chitosan microneedles (MNs) with a patch-dissolvable design for the sustained intradermal (ID) delivery of antigens and demonstrated their antigen dose-sparing potential. We found that rats immunized with chitosan MNs containing low-dose OVA had persistently high antibody levels for 18 weeks, which were significantly higher than those observed after an intramuscular injection of full-dose OVA, demonstrating at least 2.5-fold dose sparing. Our results indicate that chitosan MNs can not only serve as an efficient vaccine delivery system but also exert their promising adjuvant activity by forming an ID depot for prolonged antigen exposure and activating dendritic cells for promoting immune responses.

The sustained delivery of temozolomide from electrospun PCL-Diol-b-PU/gold nanocompsite nanofibers to treat glioblastoma tumors

In the present study, the PCL-Diol-b-PU/Au nanocompsite nanofibers were fabricated via electrospinning process during two different stages to load an anticancer temozolomide (TMZ) drug into the nanofibers. The first stage was the incorporation of Au nanoparticles into the nanofibers and the second stage was coating the gold nanoparticles on the surface of PCL-Diol-b-PU/Au composite nanofibers. The prepared nanofibrous formulations were characterized using FTIR, SEM and TEM analysis. Box-Behnken-design was used to investigate the influence of electrospinning parameters including solution concentration, applied voltage to tip-collector distance ratio and collector speed on the morphology and fiber diameter of PCL-Diol-b-PU/Au nanofibers. Drug loading efficiency, in vitro release profiles of TMZ from PCL-Diol-b-PU/Au and gold-coated PCL-Diol-b-PU/Au composite nanofibers as well as in vitro antitumor efficacy against U-87 MG human glioblastoma cells were carried out. The TMZ release data were well described using Korsmayer-Peppas kinetic model in which results indicated Fickian diffusion of TMZ from nanofibers. The obtained results revealed the higher efficiency of PCL-Diol-b-PU/Au@TMZ nanofibrous implants for treatment of glioblastoma tumors.

Transcript-activated collagen matrix as sustained mRNA delivery system for bone regeneration

Transcript therapies using chemically modified messenger RNAs (cmRNAs) are emerging as safe and promising alternatives for gene and recombinant protein therapies. However, their applications have been limited due to transient translation and relatively low stability of cmRNAs compared to DNA. Here we show that vacuum-dried cmRNA-loaded collagen sponges, termed transcript activated matrices (TAMs), can serve as depots for sustained delivery of cmRNA. TAMs provide steady state protein production for up to six days, and substantial residual expression until 11days post transfection. Another advantage of this technology was nearly 100% transfection efficiency as well as low toxicity in vitro. TAMs were stable for at least 6months at room temperature. Human BMP-2-encoding TAMs induced osteogenic differentiation of MC3T3-E1 cells in vitro and bone regeneration in a non-critical rat femoral bone defect model in vivo. In summary, TAMs are a promising tool for bone regeneration and potentially also for other applications in regenerative medicine and tissue engineering.

Microencapsulation of rifampicin for the prevention of endophthalmitis: In vitro release studies and antibacterial assessment

Rifampicin encapsulated microparticles were designed for intraocular injection after cataract surgery to prevent postoperative endophthalmitis. Microparticles were formulated by emulsification diffusion method using poly(lactic acid-co-glycolic acid) (PLGA) as polymer in order to propose a new form of rifampicin that overcome its limitations in intraocular delivery. Depending on processing formulation, different types of microparticles were prepared, characterized and evaluated by in vitro release studies. Two types of microparticles were selected to get a burst release of rifampicin, to reach minimal inhibitory concentrations to inhibit 90% of Staphylococcus epidermidis mainly involved in postoperative endophthalmitis, combined with a sustained release to maintain rifampicin concentration over 24h. The antibacterial activity and antiadhesive property on intraocular lenses were evaluated on S. epidermidis. Microparticles, with a rapid rifampicin release profile, showed an effect towards bacteria development similar to free rifampicin over 48h. However, slow-release profile microparticles exhibited a similar antibacterial effect during the first 24h, and were able to destroy all the S epidermidis in the medium after 30h. The association of the two formulations allowed obtaining interesting antibacterial profile. Moreover, rifampicin-loaded microparticles have shown a very efficient anti-adherent effect of S. epidermidis on intraocular lenses at 24h. These results propose rifampicin microparticles as suitable for antibioprophylaxis of the postoperative endophthalmitis.

Arming embolic beads with anti-VEGF antibodies and controlling their release using LbL technology

Transarterial chemoembolization (TACE) is used to treat various types of hypervascular tumors such as hepatocellular carcinoma and renal cancer. However, embolization and blocking of blood vessels nourishing a tumor mass evokes an angiogenic response due to the secretion of vascular endothelial growth factor (VEGF), which results in the formation of new blood vessels and eventually limitation in therapeutic efficacy. The presented work investigates the feasibility of loading the clinically used embolic beads (DC Bead®) with Bevacizumab (BEV), an anti-VEGF antibody, and control its release kinetics via Layer-by-Layer (LbL) coating. This strategy has the aim to achieve high, localized and sustained concentrations of BEV at the tumor site and reduce drug exposure in the systemic circulation. High loading of BEV on lyophilized beads of about 76mg BEV/bead vial was achieved. LbL coating was carried out by depositing alternating layers of the biocompatible polymers alginate and poly-L-lysine. Coating was proven successful by monitoring the reversal of zeta potential after addition of each layer. Morphological changes of the bead surface before and after coating were illustrated using SEM imaging. Moreover, release profiles from different formulations were studied and results showed that optimizing the number of deposited layers effectively slows the release of BEV for three days. Activity of released BEV was studied in different 2D and 3D cell based assays. Released BEV fractions showed comparable activity to fresh BEV solution used as control after 3days. In conclusion, our results suggest the opportunity for loading anti-VEGF antibodies on commercially available embolic beads to increase the efficacy of TACE of hypervascular tumors.

Extended release microparticle-in-gel formulation of octreotide: Effect of polymer type on acylation of peptide during in vitro release

Polymeric microparticles (MPs)-in-gel formulations for extended delivery of octreotide were developed. We investigated influence of polymer composition on acylation of octreotide and kinetics of release during in vitro release from biodegradable polymeric formulations. Polycaprolactone (PCL), polylactic acid (PLA), polyglycolic acid (PGA) and polyethylene glycol (PEG) based triblock (TB≈PCL10k-PEG2k-PCL10k) and pentablock (PBA≈PLA3k-PCL7k-PEG2k-PCL7k-PLA3k and PBB≈PGA3k-PCL7k-PEG2k-PCL7k-PGA3k) polymers were investigated. Octreotide was encapsulated in MPs using methanol-oil/water emulsion solvent evaporation method. The particles were characterized for size, morphology, encapsulation efficiency, drug loading and in vitro release. Release samples were subjected to HPLC analysis for quantitation and HPLC-MS analysis for identification of native and chemically modified octreotide adducts. Entrapment efficiency of methanol-oil/water method with TB, PBA and PBB polymers were 45%, 60%, and 82%, respectively. A significant fraction of released octreotide was acylated from lactide and glycolide based PBA (53%) and PBB (92%) polymers. Substantial amount of peptide was not released from PBB polymers after 330 days of incubation. Complete release of octreotide was achieved from TB polymer over a period of 3 months with minimal acylation of peptide (13%). PCL based polymers resulted in minimal acylation of peptide and hence may be suitable for extended peptide and protein delivery. Conversely, polymers having PLA and PGA blocks may not be appropriate for peptide delivery due to acylation and incomplete release.

Interest of cyclodextrins in spray-dried microparticles formulation for sustained pulmonary delivery of budesonide

To achieve an efficient lung delivery and efficacy, both active ingredient aerosolisation properties and permeability through the lung need to be optimized. To overcome these challenges, the present studies aim to develop cyclodextrin-based spray-dried microparticles containing a therapeutic corticosteroid (budesonide) that could be used to control airway inflammation associated with asthma. The complexation between budesonide and hydroxypropyl-β-cyclodextrin (HPBCD) has been investigated. Production of inhalation powders was carried out using a bi-fluid nozzle spray dryer and was optimized based on a design of experiments. Spray-dried microparticles display a specific "deflated-ball like shape" associated with an appropriate size for inhalation. Aerodynamic assessment show that the fine particle fraction was increased compared to a classical lactose-based budesonide formulation (44.05 vs 26.24%). Moreover, the budesonide permeability out of the lung was shown to be reduced in the presence of cyclodextrin complexes. The interest of this sustained budesonide release was evaluated in a mouse model of asthma. The anti-inflammatory effect was compared to a non-complexed budesonide formulation at the same concentration and attests the higher anti-inflammatory activity reach with the cyclodextrin-based formulation. This strategy could therefore be of particular interest for improving lung targeting while decreasing systemic side effects associated with high doses of corticosteroids. In conclusion, this works reports that cyclodextrins could be used in powder for inhalation, both for their abilities to improve active ingredient aerosolisation properties and further to their dissolution in lung fluid, to decrease permeability out of the lungs leading to an optimized activity profile.

Evaluation of topical hesperetin matrix film for back-of-the-eye delivery

PURPOSE

The goal of the present study was to develop a poly (ethylene oxide) N10 (PEO N10) based melt-cast matrix system for efficient and prolonged delivery of hesperetin (HT), a promising bioflavonoid, to the posterior segment of the eye through the topical route.

METHODS

HT film was prepared by melt-cast method using PEO N10 and cut into 4mm×2mm segments, each weighing 8mg. This film was evaluated with respect to in vitro release rates and also transmembrane delivery across Spectra/Por® membrane (MWCO: 10,000 Daltons) and isolated rabbit corneas. Ocular tissue concentrations were also determined postapplication of the film in ex vivo and in vivo models.

RESULTS

HT release from the film was determined to be about 95.3% within 2h. In vitro transcorneal flux was observed to be 0.58±0.05μg/min/cm(2) across the isolated rabbit cornea. High levels of HT were detected in the retina-choroid (RC) and vitreous humor (VH) in the ex vivo model following topical application of the film. Significant levels of HT were observed in both anterior and posterior segment ocular tissues 1h post topical application of the 10 and 20%w/w HT films on the rabbit eye. Moreover, HT was detected in the VH and RC even after 6h following topical application of the film in vivo.

CONCLUSION

The results from this study suggest that the melt-cast films can serve as a viable platform for sustained topical delivery of bioflavonoids, and other therapeutic agents, into the back-of-the eye tissues.

Kinetic models for the release of the anticancer drug doxorubicin from biodegradable polylactide/metal oxide-based hybrids

For decades, studies on drug-release kinetics have been an important topic in the field of drug delivery because they provide important insights into the mechanism of drug release from carriers. In this work, polylactide (PLA), doxorubicin (DOX), and metal oxide (MO) (titanium dioxide, magnetic iron oxide, and zinc oxide) spheres were synthesised using the solvent-evaporation technique and were tested for sustained drug release. The efficacy of a dosage system is determined by its ability to deliver the drug at a sustained rate, afford an increased plasma half-life, a minimum exposure of toxic drugs to healthy cells and a high drug pay load. Mathematical models were used to elucidate the release mechanism of the drug from the spheres. The release fitted a zero-order model with a correlation coefficient in the range of 0.9878-0.9891 and the release mechanism followed an anomalous release, meaning drug release was afforded through both diffusion and the dissolution of PLA. Therefore, PLA/DOX/MO released the same amount of drug per unit time. Consequently, the potential for PLA use as a carrier was ascertained.

Polymeric nanomicelles for sustained delivery of anti-cancer drugs

In the first section of this paper, the existing and emerging nanotechnology-based cancer therapies--nanoparticles, drug conjugates, nanomicelles--are reviewed. In a second part, we present our original and unpublished findings on the sustained release of anti-cancer drugs such as paclitaxel, doxorubicin and camptothecin using block copolymer micelles [PEG-b-poly(dioxanone-co-methyl dioxanone)]. Copolymers with variable lengths of hydrophobic and hydrophilic blocks have been synthesized and successfully loaded with paclitaxel, doxorubicin and camptothecin anti-cancer drugs, with micelles size in the range 130-300 nm. Drug encapsulation efficiencies varied between 15% and 70% depending on drug and copolymer composition. The drug binding constants, which give a good insight into drug encapsulation and release, were evaluated from UV spectroscopy as we reported previously for anti-TB drugs. Through variation of the methyl dioxanone content of the copolymer, our systems can be tailored for sustained release of the different drugs.

Mechanisms of monoclonal antibody stabilization and release from silk biomaterials

The availability of stabilization and sustained delivery systems for antibody therapeutics remains a major clinical challenge, despite the growing development of antibodies for a wide range of therapeutic applications due to their specificity and efficacy. A mechanistic understanding of protein-matrix interactions is critical for the development of such systems and is currently lacking as a mode to guide the field. We report mechanistic insight to address this need by using well-defined matrices based on silk gels, in combination with a monoclonal antibody. Variables including antibody loading, matrix density, charge interactions, hydrophobicity and water access were assessed to clarify mechanisms involved in the release of antibody from the biomaterial matrix. The results indicate that antibody release is primarily governed by hydrophobic interactions and hydration resistance, which are controlled by silk matrix chemistry, peptide domain distribution and protein density. Secondary ionic repulsions are also critical in antibody stabilization and release. Matrix modification by free methionine incorporation was found to be an effective strategy for mitigating encapsulation induced antibody oxidation. Additionally, these studies highlight a characterization approach to improve the understanding and development of other protein sustained delivery systems, with broad applicability to the rapidly developing monoclonal antibody field.

Osteogenic effect of local, long versus short term BMP-2 delivery from a novel SPU-PLGA-βTCP concentric system in a critical size defect in rats

A concentric delivery system, composed of the three biomaterials SPU, PLGA, and βTCP (segmented polyurethane, poly[lactic-co-glycolic acid], and β-tricalcium phosphate) was fabricated as an external, porous ring of βTCP with a pasty core of a new SPU, mixed with PLGA microspheres. The regenerative effects of two distinct doses of either immediately available or continuously released rhBMP-2 were evaluated in an 8mm, critical calvaria defect in rats. Protein dose and release kinetics affected material resorption rates and the progression of the regeneration process. Groups treated with the empty system alone or in conjunction with free rhBMP-2 did not respond. By contrast, after 12 weeks, approximately 20% and 60% of the defects implanted with systems loaded with 1.6 μg and 6.5 μg rhBMP-2, respectively were healed, with all the growth factor being released in the course of 6 weeks. The NMR, FTIR, GPC, DSC, and histological analyses showed that PLGA microsphere degradation occurred independently of the regenerative process. However, the resorption rate of the SPU and βTCP did depend on the regeneration process, which was governed by dose and release rate of rhBMP-2. Furthermore, the biocompatibility and high capacity of adaptation to the defect convert the herein proposed, new SPU polymer into a potential material for applications in tissue engineering and regenerative medicine.

Carbopol/chitosan based pH triggered in situ gelling system for ocular delivery of timolol maleate

The poor bioavailability and therapeutic response exhibited by conventional ophthalmic preparations due to rapid precorneal elimination, dilution and nasolacrimal drainage of the drug may be vanquished by the use of in situ gelling systems that are instilled as drops in to the eye and undergo a sol-gel transition in the cul-de-sac. Timolol eye drops may cause systemic side effects in glaucoma patients due to absorption of the drug into systemic circulation. In situ gelling system of this drug can provide localized effect with reduced contraindications, improved patient compliance and better therapeutic index. The present work describes the formulation and evaluation of an ophthalmic delivery system of an antiglaucoma drug, timolol maleate (TM) based on the concept of pH-triggered in situ gelation. Polyacrylic acid (carbopol) was used as the gelling agent in combination with chitosan (amine polysaccharide), which was acted as a viscosity-enhancing agent. Formulations were evaluated for pH, viscosity, gelling capacity and drug content. The 0.4% w/v carbopol/0.5% w/v chitosan based in situ gelling system was in liquid state at room temperature and at the pH formulated (pH 6.0) and underwent rapid transition into the viscous gel phase at the pH of the tear fluid (lacrimal fluid) (pH 7.4). The in vitro drug release and in vivo effects of the developed in situ gelling system were compared with that of Glucomol® (a 0.25% TM ophthalmic solution), 0.4% w/v carbopol solution as well as liposomal formulation. The results clearly demonstrated that developed carbopol-chitosan based formulation was therapeutically efficacious and showed a fickian (diffusion controlled) type of release behaviour over 24 h periods. The developed system is thus a viable alternative to conventional eye drops and can also prevent the rapid drainage as in case of liposomes.