Effects of temperature and moisture fluctuations for suitable use of raw-crushed wind-turbine blade in concrete

Raw-crushed wind-turbine blade (RCWTB), a waste from the recycling of wind-turbine blades, is used as a raw material in concrete in this research. It contains not only fiberglass-composite fibers that bridge the cementitious matrix but also polyurethane and balsa-wood particles. Therefore, concrete containing RCWTB can be notably affected by moisture and temperature fluctuations and by exposure to high temperatures. In this research, the performance of five concrete mixes with 0.0%, 1.5%, 3.0%, 4.5%, and 6.0% RCWTB, respectively, is studied under moist/dry, alternating-sign-temperature-shock, and high-temperature-shock tests. Two damage mechanisms of RCWTB within concrete were found through these tests: on the one hand, micro-cracking of the cementitious matrix, which was verified by microscopic analyses and was dependent on concrete porosity; on the other, damage and degradation of the RCWTB components, as the polyurethane melted, and the balsa-wood particles burned. Both phenomena led to larger remaining-strain levels and reduced concrete compressive strength by up to 25% under temperature and humidity variations, although the bridging effect of the fiberglass-composite fibers was effective when adding RCWTB amounts higher than 3.0%. The compressive-strength loss after the high-temperature-shock test increased with the RCWTB content, reaching maximum values of 8% after an exposure time of 7 days. Statistical analyses revealed that effect of the RCA amount in the concrete was conditioned by the exposure times in all the tests. The accurate definition of those times is therefore key to set an RCWTB content in concrete that ensures its suitable behavior under the environmental conditions analyzed.

Nucleotides supplementation (Nucleoforce fish™) in Caspian roach (Rutilus caspicus) diet: Growth performance, skin mucosal immune response, and resistance to salinity stress

In this study, the growth, epidermal mucosal immunity, expression of growth-related genes, cross-protection, and resistance to salinity stress of Caspian roach were scrutinized in response to dietary levels of nucleotides (NT). Accordingly, 1200 fish (0.51 ± 0.01 g) were fed ad libitum with a basal diet (38.88 % crude protein and 10.04 % crude lipid in dry basis) containing incremental levels of NT at 0 (NT-0; control), 0.3 g kg-1 (NT-0.3), 0.6 g kg-1 (NT-0.6), and 1.2 g kg-1 (NT-1.2) for 8 weeks in triplicates. The growth performance was significantly increased in the fish fed with NT-0.6 and NT-1.2 diets compared to the control group (p < 0.05). A significant elevation in the growth hormone and insulin-like growth factor-I gene expression was recorded in NT-added groups at 0.6 and 1.2 g kg-1 compared to the control group (p < 0.05). In contrast to the control group, feeding on NT-0.6 and NT-1.2 diets had a remarkable effect on the skin mucus soluble protein and immunoglobulin levels (p < 0.05). After the feeding trial, we examined how salinity stress (15 g/l salinity) lonely and salinity stress under non-lethal thermal shock (+10 °C) affected heat shock protein (HSP70). Then, the mRNA expression of HSP70 gene from the gill was analyzed at 0, 2, 8, and 24 h post-challenge tests. The HSP70 gene expression level was approximately up-regulated more than 2-fold in NT-6 and NT-1.2 treatments compared to the control group under the salinity stress. Altogether, this research represents that the addition of NT at 0.6 and 1.2 g kg-1 in Caspian roach diet can improve overall performance and resistance to salinity stress.

Proliferation, migration, and resistance to oxidative and thermal stresses of HT1080 cells with knocked out genes encoding Hsp90α and Hsp90β

Heat shock protein 90 (Hsp90) fulfils essential housekeeping functions in the cell associated with the folding, stabilization, and turnover of various proteins. In mammals, there exist two Hsp90 isoforms, stress-inducible Hsp90α and constitutively expressed Hsp90β. In an attempt to identify cellular processes dependent on Hsp90α and Hsp90β, we generated a panel of clones of human fibrosarcoma HT1080 cells with the knocked out HSP90AA1 or HSP90AB1 genes encoding, respectively, Hsp90α and Hsp90β. The knockout of the HSP90AA1 and HSP90AB1 genes practically did not affect cell proliferation and resistance to thermal shock and oxidative stress. The loss of Hsp90α in Hsp90α-null cell clones also did not impair cell migration, while the migration of the Hsp90β-null cell clones was prominently reduced as compared to parent HT1080 cells. This indicated the necessity of Hsp90β for efficient basal migration of HT1080 cells whereas Hsp90α seems to be dispensable for this process. The knockout of one Hsp90 isoform was invariably accompanied by an increase in the level of the other Hsp90 isoform by 30-50%, which partly or fully compensated for a decrease in the total level of Hsp90. Thus, we demonstrated the dispensability of Hsp90α and Hsp90β for HT1080 cells in several cellular processes under normal and stress conditions, which suggested the participation of the two Hsp90 isoforms in the same biological processes and full or at least partial functional substitution of one Hsp90 isoform by the other.

Investigation of memory influences on bio-heat responses of skin tissue due to various thermal conditions

Advancement of new technologies such as laser, focused ultrasound, microwave and radio frequency for thermal therapy of skin tissue has increased numerous challenging situations in medical treatment. In this article, a new meticulous bio-heat transfer model based on memory-dependent derivative with dual-phase-lag has been developed under different thermal conditions such as thermal shock and harmonic-type heating. Laplace transform method is acquired to perceive the analytical consequences. Quantitative results are evaluated for displacement, strain and temperature along with stress distributions in time domain by adopting the technique of inverse Laplace transform. Impacts of the constituents of memory-dependent derivatives-kernel functions along with time-delay parameter are analysed on the studied fields (temperature, displacement, strain and stress) for both thermal conditions separately using computational results. It has been found that the insertion of the memory effect proves itself a unified model, and therefore, this model can better predict temperature field data for thermal treatment processes.

Ultrafast Synthesis of Metal-Layered Hydroxides in a Dozen Seconds for High-Performance Aqueous Zn (Micro-) Battery

Efficient synthesis of transition metal hydroxides on conductive substrate is essential for enhancing their merits in industrialization of energy storage field. However, most of the synthetic routes at present mainly rely on traditional bottom-up method, which involves tedious steps, time-consuming treatments, or additional alkaline media, and is unfavorable for high-efficiency production. Herein, we present a facile, ultrafast and general avenue to synthesize transition metal hydroxides on carbon substrate within 13 s by Joule-heating method. With high reaction kinetics caused by the instantaneous high temperature, seven kinds of transition metal-layered hydroxides (TM-LDHs) are formed on carbon cloth. Therein, the fastest synthesis rate reaches ~ 0.46 cm2 s-1. Density functional theory calculations further demonstrate the nucleation energy barriers and potential mechanism for the formation of metal-based hydroxides on carbon substrates. This efficient approach avoids the use of extra agents, multiple steps, and long production time and endows the LDHs@carbon cloth with outstanding flexibility and machinability, showing practical advantages in both common and micro-zinc ion-based energy storage devices. To prove its utility, as a cathode in rechargeable aqueous alkaline Zn (micro-) battery, the NiCo LDH@carbon cloth exhibits a high energy density, superior to most transition metal LDH materials reported so far.

Can high- and low-temperature thermal stress modulate the antioxidant defense response of Astyanax lacustris brain?

Change in temperature of aquatic environment have impacts on the physiology of fish, especially in the brain, which is a vital organ and prone to oxidative damage. Astyanax lacustris is a freshwater fish that play an important role in the food market and has been increasingly used in fish farms, besides environmental monitoring studies. Therefore, this study aimed to evaluate the responses of antioxidant biomarkers and products of the oxidative process in the brains A. lacustris subjected to thermal shock. The specimens were obtained from artificial farming lakes and subjected to shock induced by exposure to high (31 °C ± 0.5) and low (15 °C ± 0.5) temperature for 2, 6, 12, 24, 48, 72 and 96 h; control group were maintained at 23 °C ± 0.5. At 31 °C, glutathione-related enzymes were more responsive, suggested by the change activity of GPx and G6PDH enzymes, in addition to GSH levels. At 15 °C, enzymes of the first line of defense were more active, evidenced by the change CAT activity. No significant changes were detected in the levels of ROS, LPO and PCO. These results indicate that the brains of A. lacustris have an efficient antioxidant defense system with the ability to acclimatize to the temperatures tested.

Smoke on the Water: Comparative Assessment of Combined Thermal Shock Treatments for Control of Invasive Asian Clam, Corbicula fluminea

Suppression of established populations of invasive alien species can be a complex and expensive process, which is frequently unsuccessful. The Asian clam, Corbicula fluminea (Müller, 1774), is considered a high impact invader that can adversely alter freshwater ecosystems and decrease their socioeconomic value. To date, C. fluminea continues to spread and persist within freshwater environments worldwide, despite repeated management attempts to prevent dispersal and suppress established populations. As extensive C. fluminea beds can often become exposed during low-water conditions, the direct application of hot or cold thermal shock treatments has been proposed as suitable mechanism for their control. Further, mechanical substrate disturbance may enhance the efficacy of thermal shock treatments by facilitating exposures to multiple layers of buried clams. In the present study, we advanced these methods by assessing combined applications of both hot and cold thermal shock treatments for control of C. fluminea, using steam spray (≥100 °C; 350 kPa), low- or high-intensity open-flame burns (~1000 °C) and dry ice (-78 °C). In a direct comparison of raking combined with hot thermal shock applications, both steam and high-intensity open-flame treatments tended to be most effective, especially following multiple applications. In addition, when hot thermal treatments are followed by a final cold shock (i.e. dry ice), steam treatments tended to be most effective. Further, when dry ice was applied either alone or prior to an application of a hot shock treatment, substantial if not complete C. fluminea mortality was observed. Overall, this study demonstrated that combined applications of hot and cold thermal shock treatments, applied following the disruption of the substrate, can substantially increase C. fluminea mortality compared to separate hot or cold treatments.

Rearing temperature conditions (constant vs. thermocycle) affect daily rhythms of thermal tolerance and sensing in zebrafish

In the wild, the environment does not remain constant, but periodically oscillates so that temperature rises in the daytime and drops at night, which generates a daily thermocycle. The effects of thermocycles on thermal tolerance have been previously described in fish. However, the impact of thermocycles on daytime-dependent thermal responses and daily rhythms of temperature tolerance and sensing expression mechanisms remain poorly understood. This study investigates the effects of two rearing conditions: constant (26 °C, C) versus a daily thermocycle (28 °C in the daytime; 24 °C at night, T) on the thermal tolerance response in zebrafish. Thermal tolerance (mortality) was assessed in 4dpf (days post fertilization) zebrafish larvae after acute heat shock (39 °C for 1 h) at two time points: middle of the light phase (ML) or middle of the dark phase (MD). Thermal stress responses were evaluated in adult zebrafish after a 37 °C challenge for 1 h at ML or MD to examine the expression of the heat-shock protein (HSP) (hsp70, hsp90ab1, grp94, hsp90aa1, hspb1, hsp47, cirbp) and transient receptor potential (TRP) channels (trpv4, trpm4a, trpm2, trpa1b) in the brain. Finally, the daily rhythms of gene expression of HSPs and TRPs were measured every 4 h for 24 h. The results revealed the larval mortality rates and the expression induction of most HSPs in adult zebrafish brain reached the highest values in fish reared under constant temperature and subjected to thermal shock at MD. The expression of most HSPs and TRPs was mainly synchronized to the light/dark (LD) cycle, regardless of the temperature regime. Most HSPs involved in hyperthermic challenges displayed diurnal rhythms with their acrophases in phase with warm-sensing thermoTRPs acrophases. The cold-sensing trpa1b peaked in the second half of the light period and slightly shifted toward the dark phase anticipating the acrophase of cirpb, which is involved in hypothermic challenges. These findings indicated that: a) thermal shocks are best tolerated in the daytime; b) the implementation of daily thermocycles during larval development reduces mortality and stress-cellular expression of HSPs to an acute thermal stress at MD; c) daily rhythms need to be considered when discussing physiological responses of thermal sensing and thermotolerance in zebrafish.

Steam and Flame Applications as Novel Methods of Population Control for Invasive Asian Clam (Corbicula fluminea) and Zebra Mussel (Dreissena polymorpha)

Control strategies for established populations of invasive alien species can be costly and complex endeavours, which are frequently unsuccessful. Therefore, rapid-reaction techniques that are capable of maximising efficacy whilst minimising environmental damage are urgently required. The Asian clam (Corbicula fluminea Müller, 1774), and the zebra mussel (Dreissena polymorpha Pallas, 1771), are invaders capable of adversely affecting the functioning and biodiversity of freshwater ecosystems. Despite efforts to implement substantial population-control measures, both species continue to spread and persist within freshwater environments. As bivalve beds often become exposed during low-water conditions, this study examined the efficacy of steam-spray (≥100 °C, 350 kPa) and open-flame burn treatments (~1000 °C) to kill exposed individuals. Direct steam exposure lasting for 5 min caused 100% mortality of C. fluminea buried at a depth of 3 cm. Further, combined rake and thermal shock treatments, whereby the substrate is disturbed between each application of either a steam or open flame, caused 100% mortality of C. fluminea specimens residing within a 4-cm deep substrate patch, following three consecutive treatment applications. However, deeper 8-cm patches and water-saturated substrate reduced maximum bivalve species mortality rates to 77% and 70%, respectively. Finally, 100% of D. polymorpha specimens were killed following exposure to steam and open-flame treatments lasting for 30 s and 5 s, respectively. Overall, our results confirm the efficacy of thermal shock treatments as a potential tool for substantial control of low-water-exposed bivalves. Although promising, our results require validation through upscaling to field application, with consideration of other substrate types, increased substrate depth, greater bivalve densities, non-target and long-term treatment effects.

Thermal Shock-Activated Spontaneous Growing of Nanosheets for Overall Water Splitting

HIGHLIGHTS

Nanomaterials-based nickel foam (NF-C/CoS/NiOOH) with nanosheets structure and core–shell heterostructure was prepared for the first time by a facile and fast synthesis strategy of Joule-heating and water soaking treatment. The formation mechanism of nanosheets structure was proposed that the driving force of nanosheets structure generation was the metastable nickel activated by thermal shock, and the CoS could induce the NiOOH nanosheets growing continually. NF-C/CoS/NiOOH exhibited good oxygen evolution, hydrogen evolution, and overall water splitting performance.

ABSTRACT

Nanomaterials based on nickel foam (NF) have been widely applied in energy conversion and storage field. Traditional synthesis methods such as hydrothermal method which is dangerous and high cost limited the scalable developments. Herein, we report a fast, simple, and low-cost synthesis method of nanomaterials based on NF by Joule-heating and water soaking treatment. Thin carbon-coated CoS on NF (NF-C/CoS) was synthesized by Joule-heating for a few seconds with rapid cooling. And then, NF-C/CoS/NiOOH with core–shell heterostructure was fabricated by soaking treatment of NF-C/CoS in water on which NiOOH nanosheets grew spontaneously. The formation mechanism is proposed that the coordination complex precursor converts into C/CoS on NF driven by Joule-heating, and the nickel on the surface of NF is activated to form metastable nickel simultaneously. The metastable nickel reacting with water leads to the formation of NiOOH, and the induction of CoS makes NiOOH grow continuously. This synthesis technology provides a new route to manufacture NF-based nanostructures, and the as-fabricated NF-C/CoS/NiOOH exhibits great potential as electrocatalyst for oxygen evolution reaction and hydrogen evolution reaction. [Image: see text]

ELECTRONIC SUPPLEMENTARY MATERIAL

The online version of this article (10.1007/s40820-020-00505-2) contains supplementary material, which is available to authorized users.

Evaluation and comparison of pre-treatment techniques for recovering indium from discarded liquid crystal displays

Over the last years, emerging incentives for secondary production of high tech-metals, found in e-waste, are created because of their increasing demand and economic issues associated with their primary production. Due to the very low share of these metals in e-waste, pre-treatment methods can result in an output fraction rich in the metals of interest and may, therefore, be essential. To this scope, the present article evaluates and compares the efficiency of four different pre-treatment approaches containing various steps for recovering indium (In) from liquid crystal displays (LCDs) in laptop computers. The pre-treatment steps, used in various combinations, are (a) dry mechanical crushing and sieving, (b) pyrolysis, (c) thermal shock and (d) gravimetric process. Also, in all approaches, liquid crystals were removed from the samples, before applying the mechanical crushing step, as these are toxic and potentially harmful to human health and the environment. The removal was achieved by ultrasonic irradiation or mild agitation and optimized in terms of time, temperature and solvent type and concentration. Then, the feasibility of each pre-treatment approach was evaluated based on two parameters: (a) the content of In in the resulting sample after pre-treatment and (b) the separated mass share (%) with larger indium content as compared to the original LCD panel. The results showed that In is highly liberated in the fractions consisting of finest particles (<25 μm and <53 μm) after dry mechanical crushing and sieving with a maximum content of 234 mg/kg, which is twice as much as in the raw material. However, these particles represented only about 14 wt% of the original LCD panel mass. On the contrary, thermal shock results indicated that this was the most efficient pre-treatment approach, as both the content of In and the separated LCD mass (%) remained in high levels. Finally, some economic aspects associated with the processes are presented.

Failure of Glass Tubing Vials during Lyophilization

Lyophilization is a commonly used and often preferred method for preparing certain drug products. In this process, the liquid pharmaceutical product is packaged in glass vials, frozen, and then dried via sublimation at low pressures. One problem that can be encountered during lyophilization is the occasional failure of the glass vial, a condition that will be referred to in this paper as "lyo-breakage." Lyo-breakage, while relatively rare, can be a serious problem, as it results in lost product, additional costs to remediate any spillage, and inspection time to ensure that all broken vials are discarded. Some companies have suggested that lyo-breakage is related to thermal stress and, subsequently, can be reduced through changes to the thermal properties of the vials. In this paper, we will show that when the most common form of lyo-breakage occurs, the stresses in the glass are caused by an internal force from product expansion during freezing and not due to thermal stress from processing temperatures.LAY ABSTRACT: Lyophilization, or freeze drying, is often the preferred method for preparing certain drug products following manufacture. In this process, the liquid pharmaceutical product is packaged in a small glass cylindrical container called a vial, frozen, and then dried at low pressures. One problem that can be encountered during lyophilization is the occasional failure of the glass vial. While relatively rare, this failure can result in lost drug product, additional costs to clean up any spillage, and increased inspection time to ensure that all broken vials are discarded. The data presented in this paper demonstrate that when the most common form of lyophilization-associated breakage occurs, the stresses in the glass are caused by an internal force from drug product expansion during freezing and not due to thermal stress on the glass from processing temperatures.