Prolonged polymerization of a universal adhesive in non-carious cervical lesions: 36-month double-blind randomized clinical trial

OBJECTIVE

To evaluate the effect of prolonged (P) polymerization time of a universal adhesive system applied in etch-and-rinse (ER) or self-etch (SE) strategies on the clinical performance of restorations in non-carious cervical lesions (NCCLs), after 36 months of clinical service.

METHODS

A total of 140 restorations were randomly placed in 35 subjects according to the polymerization time groups: ER (10 s); ER-P (40 s); SE (10 s); and SE-P (40 s) at 1,200 mW/cm2. Composite resin was placed incrementally. The restorations were evaluated immediately and after 6, 12, 18, and 36 months using the FDI criteria. Data were analyzed using the Kaplan-Meier survival test for retention loss, and the Kruskal-Wallis' test for secondary outcomes (α = 0.05).

RESULTS

After 36 months, 19 restorations were lost: ER 6, ER-P 2, SE 9, SE-P 2. The retention rates were 82.3% for ER; 94.1 % for ER-P; 73.5 % for SE; and 94.1 % for SE-P, with a significant difference between ER vs. ER-P and SE vs. SE-P, as well as ER vs. SE-P and ER-P vs. SE (p < 0.0001). Minor defects were observed in 18 restorations for the marginal staining criteria: ER 5, ER-P 2, SE 8, SE-P 3; and in 33 restorations for the marginal adaptation criteria: ER 11, ER-P 4, SE 12, and SE-P 6 (p > 0.05). No restorations showed recurrence of caries or postoperative sensitivity.

CONCLUSIONS

A prolonged polymerization time of 40 s improves the clinical performance of the universal adhesive for both adhesive strategies evaluated, even after 36 months.

CLINICAL SIGNIFICANCE

Prolonging the polymerization time of a universal adhesive from 10 to 40 s has been shown to improve its clinical performance when used in NCCLs.

48-month clinical evaluation of a copper-containing universal adhesive in non-carious cervical lesions: A double-blind randomised clinical trial

OBJECTIVES

This study aimed to evaluate the effect of copper nanoparticles (CuNp) on the clinical performance of a universal adhesive system used as an etch-and-rinse or self-etch strategy.

METHODS

A total of 216 class V (non-carious lesions) restorations were randomly placed in 36 subjects according to the following groups: ERcu, adhesive in etch-and-rinse with 0.1% CuNp; ERct, adhesive in etch-and-rinse without CuNp; SEcu, adhesive in self-etch with 0.1% CuNp; and Sect, adhesive in self-etch without CuNp. Restorations were evaluated at baseline and at 6, 12, 18, 36, and 48 months, using the FDI and USPHS criteria. Appropriate statistical analyses were performed (α = 0.05).

RESULTS

After 48 months, 14 restorations were lost (two for ERcu, five for SEcu, and seven for SEct) and the retention rates (95% confidence interval [CI]) were 74.1% for ERcu (95% CI 61.1-83.8); 81.5% for ERct (95% CI 69.2-89.6); 64.8% (95% CI 51.5-76.2) for SEcu; and 64.8% (95% CI 51.5-76.2) for SEct, with statistical differences between SEct vs. ERct and SEcu vs. ERct (p < 0.05). No significant differences between the groups were observed when the secondary parameters were evaluated (p > 0.05). Nineteen restorations (two for ERcu, two for ERct, six for SEcu, and nine for SEct) showed minor marginal staining, and 44 restorations (7 for ERcu, 8 for ERct, 14 for SEcu, and 15 for SEct) presented minimal marginal adaptation defects.

SIGNIFICANCE

This is the first long-term clinical trial to show that the addition of CuNp to a universal adhesive system does not affect clinical performance.

The effects of amalgam contamination and different surface modifications on microleakage of dentin bonded to bulk fill composite when using different adhesive protocols

BACKGROUND

To evaluate the effect of amalgam contamination, different surface treatments, and adhesive protocols on dentin microleakage to bulk-fill composite resin material.

METHODS

Forty teeth were fixed in (polyvinyl siloxane) PVS molds, and the Class II cavities were placed on mesial and distal aspects. Thirty teeth were restored by amalgam and thermocycled to 10,000 cycles (5 and 55 °C, 30-s dwell time). The rest were restored with Filtek one Bulk Fill composite without amalgam predecessor. Samples were divided into: G1 (dentin pretreated with 2% chlorhexidine gluconate), G2 (0.5 mm of dentin was removed), G3 (no surface modification), and G4 (control, where composite was bonded to sound dentin without amalgam predecessor.). Single Bond Universal Adhesive system was used to bond the composite material, by using the etch-and-rinse protocol in the mesial cavity preparation and self-etch protocol in the distal. Specimens underwent thermocycling for 5000 cycles, then embedded in silver nitrate and sectioned for stereomicroscope examination. Descriptive statistics, Mann-Whitney U test, and Kruskal-Wallis test were used to analyze the results at p < 0.05.

RESULTS

The highest microleakage score values (4.00) were found in the G2, and G4 in etch-and-rinse protocol. While the lowest scores were found in G2 when using self-etching protocol (1.5). Lower microleakage values were associated with the chlorhexidine treatment group for both adhesive protocols. No significant differences were found between amalgam contaminated and non-contaminated groups.

CONCLUSIONS

Amalgam contamination did not affect microleakage. Self-etching adhesive protocol significantly reduced microleakage for all groups irrespective of the surface treatment. Chlorhexidine pretreatment improved microleakage for both adhesive protocols but had no significant effect.

A universal adhesive containing copper nanoparticles improves the stability of hybrid layer in a cariogenic oral environment: An in situ study

PURPOSE

To evaluate how incorporating copper nanoparticles (CuNp) into a universal adhesive affects the antimicrobial activity (AMA), bond strength (μTBS), nanoleakage (NL), elastic modulus (EM) and nanohardness (NH) of resin-dentin interfaces, at 24 h (24 h) and after in situ cariogenic challenge (CC).

METHODS

CuNp (0% [control] and 0.1 wt%) was added to an adhesive. After enamel removal, the adhesives were applied to dentine surfaces. Each restored tooth was sectioned longitudinally to obtain two hemi-teeth; one of them was evaluated after 24 h, and the other was included in one of the intra-oral palatal devices placed in the mouths of 10 volunteers for 14 days in CC. After that, each hemi-tooth was removed, and any oral biofilm that formed was collected. The AMA was evaluated against Streptococcus mutans. For the 24 h and CC groups, each hemi-tooth was sectioned in the "x" direction to obtain one slice for each EM/NH evaluation. The remains of each hemi-tooth were sectioned in the "x" and "y" directions to obtain resin-dentin beams for μTBS and NL evaluation (24 h and CC). ANOVA and Tukey's test were applied (α = 0.05).

RESULTS

The presence of CuNp significantly improved AMA as well as all of the evaluated properties (24 h; p < 0.05). Although the adhesive properties (μTBS/NL) for all groups decreased after CC (p < 0.05), the adhesive containing CuNp showed higher μTBS and lower NL as compared to the copper-free adhesive (p < 0.05). The incorporation of CuNp maintained NH/EM values after CC (p < 0.05).

CONCLUSIONS

Adding 0.1% CuNp to an adhesive may provide antimicrobial activity and increase its bonding and mechanical properties, even under a cariogenic challenge.

SIGNIFICANCE

This is the first in situ study proving that incorporating CuNp into an adhesive is an achievable alternative to provide antimicrobial properties and improve the integrity of the hybrid layer under in situ cariogenic challenge.

An 18-month clinical evaluation of prolonged polymerization of a universal adhesive in non-carious cervical lesions: A double-blind randomized clinical trial

OBJECTIVE

This study aimed to evaluate the effect of prolonging polymerization time on the 18 months clinical performance of a universal adhesive system used as etch-and-rinse (ER) and self-etch (SE).

METHODS

140 restorations were randomly placed in 35 subjects according to the following groups: ER10 (light-curing for 10 s); ER40 (light-curing for 40 s); SE10 (light-curing for 10 s) and; SE40 (light-curing for 40 s/1200 mW/cm²). A resin composite was placed incrementally. The restorations were evaluated at baseline and after 18 months by using the FDI criteria. The following outcomes were evaluated: marginal staining, marginal adaptation, spontaneous post-operative sensitivity and recurrence of caries. The differences among the groups were calculated using Friedman repeated measures analysis of variance rank (α = 0.05).

RESULTS

After 18 months the retention/fracture rates were 88.9% (95%CI 74.1-95.6%) for ER10, 94.3% (95%CI 91.4-98.5%) for ER40, 77.2% (95%CI 60.1-87.9) for SE10 and 97.2% (95%CI 85.5-99.9%) for SE40. A significant difference was detected in the retention rate when SE10 was compared to the SE40 (p = 0.01). Also, ER40 showed a significant improvement of the marginal adaptation when compared to ER10 (p = 0.01).

SIGNIFICANCE

This is the first study that demonstrates an improvement in the clinical performance of universal adhesive systems in non-carious cervical lesions when prolonged light-cured was applied.

Does the etching strategy influence the bonding of universal adhesive systems to primary teeth? A systematic review and meta-analysis of in vitro studies

PURPOSE

To assess through a systematic review and meta-analysis of in vitro studies, the influence of the etching strategy (etch-and-rinse versus self-etch) of universal adhesive systems on bonding to primary teeth.

METHODS

A systematic search was carried out in PubMed, Web of Science and Scopus. In vitro studies that compared the bond strength of the etching strategies of universal adhesives to primary teeth were included. Pooled-effect estimates were derived from a random-effects model by comparing the standardized mean difference between the etching strategies (α < 0.05). The risk of bias and heterogeneity between studies were also assessed (Cochrane and I2 tests).

RESULTS

Seven studies were included in the review and six in the meta-analyses. For dentin, the immediate bond strength was not influenced by the etching strategy regardless of sound (Z = 0.72, p = 0.47) or caries-affected (Z = 1.27, p = 0.21) substrate, nor after aging (Z = 0.24, p = 0.81). It was not possible to perform a meta-analysis for the enamel substrate. Most studies have a medium risk of bias.

CONCLUSIONS

This systematic review and meta-analysis of in vitro studies provides evidence that universal adhesives can be used in both etching strategies in primary dentin. The evidence is currently insufficient about whether selective acid etching of primary enamel is necessary when universal adhesive systems are used.

18-month clinical evaluation of a copper-containing universal adhesive in non-carious cervical lesions: A double-blind, randomized controlled trial

OBJECTIVE

This study aimed to evaluate the addition of copper nanoparticles (CuNp) on the clinical performance of a universal adhesive system used as etch-and-rinse (ER) and self-etch (SE).

METHODS

216 restorations were randomly placed in 36 subjects according to the following groups: ERcu = etch-and-rinse with 0.1% CuNp; ERct = etch-and-rinse without CuNp; SEcu = self-etch with 0.1% CuNp; SEct = self-etch without CuNp. Resin composite was placed incrementally and light-cured. The restorations were evaluated at baseline and 6, 12 and 18 months using the FDI and USPHS criteria. Statistical analyses were performed using appropriate tests (α = 0.05).

RESULTS

The addition of CuNp did not increase the clinical performance (FDI / USPHS) of the universal adhesive tested after 18-month when applied in the ER mode (p > 0.05). The addition of CuNp in SE restorations increased the retention rate significantly and decreased the marginal discrepancies after 18 months (p < 0.05).

CONCLUSION

The clinical performance of universal adhesive was significantly increased when applied in the SE mode with the addition of copper nanoparticles.

CLINICAL RELEVANCE

This is the first study that demonstrates a slight improvement in the clinical performance of universal adhesive systems in non-carious cervical lesions when added CuNp in lower concentration.

Zinc oxide and copper nanoparticles addition in universal adhesive systems improve interface stability on caries-affected dentin

This study evaluated the MMP inhibition of the zinc oxide and copper nanoparticles (ZnO/CuNp), and the effects of their addition into adhesives on antimicrobial activity (AMA), ultimate tensile strength (UTS), in vitro degree of conversion (in vitro-DC), as well as, resin-dentin bond strength (μTBS), nanoleakage (NL) and in situ-DC on caries-affected dentin. Anti-MMP activity was evaluated for several MMPs. ZnO/CuNp (0% [control]; 5/0.1 and 5/0.2 wt%) were added into Prime&Bond Active (PBA) and Ambar Universal (AMB). The AMA was evaluated against Streptococcus mutans. UTS were tested after 24 h and 28d. After induced caries, adhesives and composite were applied to flat dentin surfaces, and specimens were sectioned to obtain resin-dentin sticks. μTBS, NL, in vitro-DC and in situ-DC were evaluated after 24 h. ANOVA and Tukey's test were applied (α = 0.05). ZnO/CuNp demonstrated anti-MMP activity (p < 0.05). The addition of ZnO/CuNp increased AMA and UTS (AMB; p < 0.05). UTS for PBA, in vitro-DC, in situ-DC and μTBS for both adhesives were maintained with ZnO/CuNp (p > 0.05). However, lower NL was observed for ZnO/CuNp groups (p < 0.05). The addition of ZnO/CuNp in adhesives may be an alternative to provide antimicrobial, anti-MMP activities and improves the integrity of the hybrid layer on caries-affected dentin.