In situ construction of WO3 nanoparticles decorated Bi2MoO6 microspheres for boosting photocatalytic degradation of refractory pollutants

Visible-light-driven (VLD) heterojunction photocatalysts for refractory contaminant degradation have aroused huge interest because of their outstanding photocatalytic performance. From the aspect of practical application, it is important to develop a highly efficient, durable, eco-friendly and inexpensive VLD photocatalyst. Herein, we report a novel VLD WO₃/Bi₂MoO₆ heterojunction photocatalyst with remarkable photocatalytic activity, which was fabricated via an electrospinning-calcination-solvothermal route. The phase, composition, morphologies, and optical properties of WO₃/Bi₂MoO₆ heterojunctions were comprehensively characterized. The photocatalytic performance of WO₃/Bi₂MoO₆ heterojunctions was assessed by the removal of rhodamine (RhB) and tetracycline hydrochloride (TC) under visible light (VL). WO₃/Bi₂MoO₆ heterojunctions displayed superior photocatalytic activities compared to Bi₂MoO₆, WO₃, or the mechanical mixture of WO₃ and Bi₂MoO₆. In particular, the heterojunction material (0.4WB, theoretical molar ratio of WO₃/Bi₂MoO₆ is 0.4/1.0) exhibited the best degradation efficiency (100%) and mineralization rate (52.3%) in 90 min, both of which exceeded the observed rates for Bi₂MoO₆ by 5.3 and 6.4 times, respectively. Moreover, 0.4WB showed a good durability in eight runs. The optimized photocatalytic property of WO₃/Bi₂MoO₆ can be attributed to enhanced VL absorption and reduced recombination efficiency of carriers owing to the synergistic effects between Bi₂MoO₆ and WO₃. The necessity of direct contact between WO₃/Bi₂MoO₆ and contaminants was experimentally verified. The study on photocatalytic mechanism demonstrates that superoxide free radicals (O₂^-) and photo-generated hole (h⁺) are dominantly responsible for the pollutant degradation, as demonstrated by the trapping experiments and electron spin resonance (ESR) analysis. Therefore, the WO₃/Bi₂MoO₆ heterojunction holds huge potential to be utilized as a durable and highly active photocatalyst for wastewater treatment.

Enhanced visible-light photocatalytic activity of active Al₂O₃/g-C₃N₄ heterojunctions synthesized via surface hydroxyl modification

Novel Al2O3/g-C3N4 heterojunction photocatalysts were fabricated through ultrasonic dispersion method. Al2O3, obtained via solution combustion, contained amorphous ingredient with lots of defect sites and was used as active component for transferring photo-induced electrons of g-C3N4. G-C3N4 was grafted surface hydroxyl groups in the presence of ammonia aqueous solution to combine with Al2O3 possessing positive charges via hydrogen bond. The XRD, SEM, element map, TEM, HRTEM, FT-IR, and XPS results indicate that these synthesized materials are two-phase hybrids of Al2O3 and g-C3N4 with interaction. The photocatalytic results for the degradation of rhodamine B (RhB) indicate that the most active heterojunction proportion is 60wt.% g-C3N4:40wt.% Al2O3, the visible light photocatalytic activity of which is 3.8 times that of a mechanical mixture. The enhanced performance is attributed to the high separation efficiency of photo-induced electrons from the LUMO of g-C3N4 injected into the defect sites of Al2O3, which is verified by photoluminescence spectroscopy (PL) and surface photovoltage (SPV) measurements. The electron paramagnetic resonance (EPR) signals and radical scavengers trapping experiments reveal holes (h(+)) and superoxide anion radical (O2(-)) are the main active species responsible for the degradation of RhB.

Improved visible-light activities for degrading pollutants on TiO2/g-C3N4 nanocomposites by decorating SPR Au nanoparticles and 2,4-dichlorophenol decomposition path

It has been clearly demonstrated that the visible-light photocatalytic activities of g-C₃N₄ (CN) for degrading 2,4-dichlorophenol (2,4-DCP) and bisphenol A (BPA) could be improved by fabricating nanocomposites with a proper amount of nanocrystalline anatase TiO₂. Interestingly, the visible-light activities of the amount-optimized nanocomposite could be further improved after decorating Au nanoparticles, with 5.11- and 3.1-time improvement respectively for 2,4-DCP and BPA compared to that of CN, even much higher than that of P25 TiO₂ under UV-vis irradiation. Based on the transient-state surface photovoltage responses and photoelectrochemical measurements, it is confirmed that the exceptional visible-light activities of the fabricated Au-(TiO₂/g-C₃N₄) nanocomposites are attributed to the extended visible-light response due to the surface plasmonic resonance (SPR) of decorated Au and its catalytic function, and to the enhanced charge separation by transferring electrons from CN and SPR Au to TiO₂ in the nanocomposites. The highly promoted charge separation results in the effective availability of a large number of hydroxyl radicals (OH) participating in the photocatalytic oxidation process of 2,4-DCP. Furthermore, a possible mechanism of 2,4-DCP degradation is proposed according to the detailed analyses of produced intermediates. This work provides new idea for designing Au assisted nanocomposite photocatalysts for environmental remediation.

Construction of amorphous TiO₂/BiOBr heterojunctions via facets coupling for enhanced photocatalytic activity

Facets coupled BiOBr with amorphous TiO2 composite photocatalysts are synthesized via an in situ direct growth approach under microwave irradiation. XRD, SEM and HRTEM characterizations indicate that the heterointerface between BiOBr and amorphous TiO2 occurs mainly on the {001} facets of BiOBr. BET and TEM verify that the heterojunctions possess higher specific surface areas and smaller amorphous TiO2 particle size than bare BiOBr and amorphous TiO2, exhibiting the inhibition function of BiOBr on the growth of TiO2 particles. XPS verifies the interaction between the two components. The degradation of methyl orange (MO) and phenol are used as the objective reaction to evaluate the photocatalytic activity of the as-prepared samples. The reaction rate constant of 15% TiO2/BiOBr composite is 3.4 times greater than that of pure BiOBr, which is attributed to its higher surface area, and efficient separation of photo-generated electron-hole pairs between BiOBr and amorphous TiO2.

Facile construction of novel organic-inorganic tetra (4-carboxyphenyl) porphyrin/Bi2MoO6 heterojunction for tetracycline degradation: Performance, degradation pathways, intermediate toxicity analysis and mechanism insight

Developing durable photocatalysts with highly efficient antibiotics degradation is crucial for environment purification. Herein, tetra (4-carboxyphenyl) porphyrin (TCPP) was loaded onto the surface of Bi₂MoO₆ microspheres to gain hierarchical organic-inorganic TCPP/Bi₂MoO₆ (TCPP/BMO) heterojunctions via a facile impregnation strategy. The catalytic properties of these catalysts were comprehensively investigated through the photodegradation of tetracycline hydrochloride (TC) under visible light. Among all the TCPP/BMO heterojunctions, the highest photodegradation rate constant (0.0278 min^-1) was achieved with 0.25 wt% TCPP (TCPP/BMO-2), which was approximately 1.15 folds greater than that of pristine Bi₂MoO₆ and far superior to pure TCPP. The extremely high photocatalytic performance is attributed to the interfacial interaction between TCPP and Bi₂MoO₆, which favors the efficient separation of charge carriers and the enhancement of visible-light absorbance. TCPP/BMO-2 possesses high mineralization capability and good recycling performance. Photo-induced O₂^-, h⁺, and OH were mainly responsible for the degradation of TC. The degradation pathways of TC and toxicity of degradation intermediates were analyzed based on the intermediates detected by the high performance liquid chromatography-mass spectrometer (HPLC-MS) and the toxicity assessment by the quantitative structure-activity relationship (QSAR) prediction. A possible photocatalytic mechanism over TCPP/BMO is proposed. This work offers an insight in developing the porphyrin-based organic-inorganic heterojunctions for effectively remedying pharmaceutical wastewater.

In-situ self-assembly construction of hollow tubular g-C3N4 isotype heterojunction for enhanced visible-light photocatalysis: Experiments and theories

A highly reactive hollow tubular g-C₃N₄ isotype heterojunction (SCN-CN) was designed to enhance visible light absorption and manipulate the directed transfer of electrons and holes. The results of UV-vis DRS, XPS valence band and DFT theoretical calculations indicated S doping increases the visible-light absorption capacity and changed the ba nd gap structure of g-C₃N₄ (CN), resulting in the transfer of electrons from the CN to the SCN and holes from the SCN to the CN under visible light. In addition, the tubular structure of the SCN-CN facilitated the transfer of electrons in the longitudinal direction, which reduced charge carrier recombination. Furthermore, the optical properties, electronic structure, and electron transfer of SCN-CN were also studied by experiments and theoretical calculations. The antibiotic tetracycline hydrochloride (TCH) and dye Rhodamine B (RHB) were subjected to evaluate the photocatalytic performance of SCN-CN. The scavenger tests and ESR data showed that the h⁺, ·O₂^- and ·OH worked together in the photocatalytic process. Moreover, the photocatalytic degradation pathway was analyzed by LC-MS. This study synthesized a hollow tubular CN isotype heterojunction with high visible-light photocatalytic performance and provided a theoretical basis for CN isotype heterojunction.

Enhanced visible-light activation of persulfate by Ti3+ self-doped TiO2/graphene nanocomposite for the rapid and efficient degradation of micropollutants in water

In this study, a novel TiO_2-x/rGO-PS-Vis process was developed, which utilizes the TiO_2-x/rGO (Ti³⁺ and oxygen vacancies self-doped TiO₂ coupled with reduced graphene oxide) nanocomposite as a promising and efficient activator of persulfate (PS) for the enhanced oxidation of micropollutants under visible -light irradiation. TiO_2-x/rGO exhibited a significantly high activity for PS activation to produce more sulfate radicals (SO₄^-) and hydroxyl radicals (OH). Therefore, almost 100% BPA (10 mg/L) and 80% TOC can be removed just within 12 min with 1.0 g/L TiO_2-x/rGO and 2 mM PS under visible light. Moreover, it was found that many other typical micropollutants, such as phenol, acetaminophen and sulfamethoxazole can also be effectively degraded by this process. Electron paramagnetic resonance (EPR) and radical quenching experiments indicated that both SO₄^- and OH contribute to the degradation of organics, and the radical process was the main degradation pathway. In addition, the effects of PS concentration, catalyst dosage, initial solution pH and inorganic anions were investigated systematically. Experiments carried out in the real background of water matrix with low-concentration of BPA indicated that the proposed TiO_2-x/rGO-PS-Vis process has strong non-selective photo-oxidative ability for the removal of micropollutants in water.

Enhanced visible-light photocatalytic decomposition of 2,4-dichlorophenoxyacetic acid over ZnIn2S4/g-C3N4 photocatalyst

ZnIn2S4/g-C3N4 heterojunction photocatalyst was successfully synthesized via a simple hydrothermal method and applied to visible-light photocatalytic decomposition of 2,4-dichlorophenoxyacetic acid (2,4-D) from aqueous phase. The flower-like ZnIn2S4 particles were dispersed on the surface of g-C3N4 nanosheets in the ZnIn2S4/g-C3N4 composite. The composite showed higher separation rate of electron-hole pairs as compared to ZnIn2S4 and g-C3N4. Consequently, the ZnIn2S4/g-C3N4 composite exhibited enhanced visible light photocatalytic decomposition efficiency of 2,4-D, within 20% ZnIn2S4/g-C3N4 composite owning the highest photocatalytic efficiency and initial rate. The initial rates of 2,4-D degradation on g-C3N4, ZnIn2S4, and 20% ZnIn2S4/g-C3N4 were 1.23, 0.57 and 3.69mmol/(gcath), respectively. The h(+) and O2(-) were found to be the dominant active species for 2,4-D decomposition. The photocatalytic degradation pathways of 2,4-D by ZnIn2S4/g-C3N4 under visible light irradiation were explored. The ZnIn2S4/g-C3N4 composite displayed high photostability in recycling tests, reflecting its promising potential as an effective visible light photocatalyst for 2,4-D treatment.

MOF-derived N-doped ZnO carbon skeleton@hierarchical Bi2MoO6 S-scheme heterojunction for photodegradation of SMX: Mechanism, pathways and DFT calculation

Semiconductor photocatalytic degradation of pollutants is considered to be one of the promising sustainable energy routes. Nevertheless, it is challenging for photocatalysts to have excellent visible light absorption and suppress photo-generated electron-hole recombination at the same time. Here, we prepared nitrogen-doped ZnO carbon skeleton by directly calcining the metal-organic framework. Then hierarchical Bi₂MoO₆ nanosheets are grown in situ on its surface to synthesize S-scheme heterojunction. This special 3D layered and oxygen vacancies work together to make photo-generated electrons and holes easier to separate and migrate. Therefore, the pseudo-first-order kinetic constant of N-doped ZnO carbon skeleton@Bi₂MoO₆ degradation of sulfamethoxazole reaches 0.022 min^-1, which is almost 10 times that of ZIF-8 derived ZnO and 27.5 times Bi₂MoO₆ under visible light irradiation. Meanwhile, the mechanism of driving charge transfer of S-scheme heterojunction, and the photocatalytic degradation pathway of sulfamethoxazole are also analyzed. This work will provide a new way to construct S-scheme heterojunction photocatalyst to degrade antibiotic pollutants.

Oxygen vacancy-mediated sandwich-structural TiO2-x /ultrathin g-C3N4/TiO2-x direct Z-scheme heterojunction visible-light-driven photocatalyst for efficient removal of high toxic tetracycline antibiotics

A surface defect sandwich-structural TiO_2-x/ultrathin g-C₃N₄/TiO_2-x direct Z-scheme heterojunction photocatalyst is successfully constructed. The results manifest the existence of oxygen vacancies, sandwich structure and direct Z-scheme heterojunction. Noticeably, TiO_2-x/ultrathin g-C₃N₄/TiO_2-x efficiently eliminates high toxic tetracycline hydrochloride by means of·O₂^-, h⁺ and·OH, whose removal rate is 87.7% during 90 min and the pseudo-first-order rate constant reaches up to 31.7 min^-1 × 10^-3. The extraordinary performance can be attributed to the special 3D structure, Z-scheme heterojunction expediting charge transfer and promoting the generation of active species, meanwhile the oxygen vacancies enhancing the spatial separation of photo-induced carriers. Moreover, various environmental factors are systematically explored by statistics. SO₄^2-, NH₃-N and pH exhibit an obvious impact on removal rate. Meanwhile, TiO_2-x/ultrathin g-C₃N₄/TiO_2-x could also effectually remove tetracycline hydrochloride from complex actual-wastewater and exhibit high stability. Besides, the photocatalytic mechanism and degradation path of tetracycline hydrochloride are also elucidated.

Bi2MoO6/BiFeO3 heterojunction nanofibers: Enhanced photocatalytic activity, charge separation mechanism and magnetic separability

Uniform Bi₂MoO₆ nanosheets were grown in a high dispersed fashion on electrospun BiFeO₃ nanofibers via a solvothermal technique. The loading amount of Bi₂MoO₆ in the Bi₂MoO₆/BiFeO₃ heterojunction nanofibers could be controlled by adjusting the precursor concentrations in the solvothermal process. The XPS analysis, energy band position calculation and trapping experiments all proved that the Bi₂MoO₆/BiFeO₃ heterojunction is a Z-scheme heterojunction. The Z-scheme Bi₂MoO₆/BiFeO₃ heterojunction had a much higher photocatalytic activity in the visible-light photodegradation of Rhodamine B (RhB) and tetracycline hydrochloride (TC) than pure BiFeO₃ nanofibers or pure Bi₂MoO₆ nanosheets. The enhanced photocatalytic activity was attributed to the formation of Z-scheme Bi₂MoO₆/BiFeO₃ heterojunctions, which could be beneficial to the separation of photogenerated electron-hole pairs. Moreover, the Bi₂MoO₆/BiFeO₃ heterojunction nanofibers could be easily separated under an external magnetic field via the ferromagnetic BiFeO₃. After several cycles, the photocatalytic activity of the Bi₂MoO₆/BiFeO₃ heterojunction no longer significantly decreased suggesting that the Bi₂MoO₆/BiFeO₃ heterojunction is stable. These Z-scheme Bi₂MoO₆/BiFeO₃ heterojunction nanofibers with highly visible-light photocatalytic activity, excellent chemical stability and magnetic separability could be useful in many practical applications.

Shuttle-like CeO2/g-C3N4 composite combined with persulfate for the enhanced photocatalytic degradation of norfloxacin under visible light

In this work, the shuttle-like CeO₂ modified g-C₃N₄ composite was synthesized and was combined with persulfate (PS) for the efficient photocatalytic degradation of norfloxacin (NOR) under visible light. Scanning and transmission electron microscopy (SEM and TEM), X-ray diffraction (XRD), UV-vis diffuse reflectance spectroscopy (DRS) and photoluminescence (PL) emission spectra were used to characterize the structural and optical properties of the as-prepared catalysts. Active species trapping experiments demonstrated that additional sulfate radicals (·SO₄^-) formed upon the addition of PS which could cooperate with superoxide radicals (O₂^-), holes (h⁺) and hydroxyl radicals (OH) to decompose NOR. Singlet oxygen (¹O₂) was also formed during the reaction and acted as an important active species. The degradation products of NOR were also identified and analyzed by using LC-MS technology, and the possible degradation mechanism and pathways were proposed and discussed. This work indicated that the shuttle-like CeO₂ modified g-C₃N₄ coupled with PS displayed promising applications in the field of pharmaceutical wastewater purification.

Preparation of C3N5 nanosheets with enhanced performance in photocatalytic methylene blue (MB) degradation and H2-evolution from water splitting

Ultrathin C₃N₅ nanosheets with enhanced photocatalytic methylene blue (MB) degradation and H₂-evolution performance were prepared from thermal treatment of 3-amino-1,2,4-triazole (3-AT) and NH₄Cl followed with a protonate procedure. The characterization results revealed that the protonating process could contribute to the exfoliation of C₃N₅ with large surface area, the effective charge transfer capability and the modified band structure. The as-prepared C₃N₅ nanosheets exhibited enhanced properties in photocatalytic reactions such as MB photodegradation and H₂-evolution from water splitting. This study offered a feasible route to prepare highly-efficient two-dimensional photocatalyst, which could be applied potentially for implementation in wide range of energy generation and environmental applications.

Preparation and enhanced visible-light photocatalytic activity of graphitic carbon nitride/bismuth niobate heterojunctions

A series of graphitic carbon nitride/bismuth niobate (g-C3N4/Bi5Nb3O15) heterojunctions with g-C3N4 doping level of 10-90 wt% were prepared by a facile milling-heat treatment method. The phase and chemical structures, surface compositions, electronic and optical properties as well as morphologies of the prepared g-C3N4/Bi5Nb3O15 were well-characterized. Subsequently, the photocatalytic activity and stability of g-C3N4/Bi5Nb3O15 were evaluated by the degradation of aqueous methyl orange (MO) and 4-chlorophenol (4-CP) under the visible-light irradiation. At suitable g-C3N4 doping levels, g-C3N4/Bi5Nb3O15 exhibited enhanced visible-light photocatalytic activity compared with pure g-C3N4 or Bi5Nb3O15. This excellent photocatalytic activity was revealed in terms of the extension of visible-light response and efficient separation and transportation of the photogenerated electrons and holes due to coupling of g-C3N4 and Bi5Nb3O15. Additionally, the active species yielded in the pure g-C3N4- and g-C3N4/Bi5Nb3O15-catalyzed 4-CP photodegradation systems were investigated by the free radical and hole scavenging experiments.

Simultaneous removal of Cr(VI) and phenol contaminants using Z-scheme bismuth oxyiodide/reduced graphene oxide/bismuth sulfide system under visible-light irradiation

An all-solid-state Z-scheme system containing Bi-based semiconductors bismuth oxyiodide (BiOI) and bismuth sulfide (Bi₂S₃) was constructed on reduced graphene oxide (rGO) sheets through an electrostatic self-assembly method to simultaneously remove aqueous Cr(VI) and phenol. In this Z-scheme that mimicked natural photosynthesis, photoinduced electrons in the conduction band (CB) of BiOI were transferred through rGO and reacted with photoinduced holes in the valence band (VB) of Bi₂S₃, which significantly increased its photocatalytic activity. The reduction and oxidation reactions were performed on Bi₂S₃ and BiOI photocatalysts, respectively. Furthermore, complex contaminants of coexisting heavy metal Cr(VI) and organic phenol were treated using the system under visible-light irradiation. Results showed that Cr(VI) reduction and phenol oxidation were achieved efficiently with optimum reductive and oxidative efficiencies up to 73% and 95% under visible-light irradiation, respectively. This work provided a promising method of simultaneously removing heavy metals and organic pollutants by using a Z-scheme system with enhanced photocatalytic activity.

Preparation of carbon microspheres decorated with silver nanoparticles and their ability to remove dyes from aqueous solution

Solid, but not hollow or porous, carbon microspheres decorated with silver nanoparticles (AgNP-CMSs) were prepared from silver nitrate and CMSs by a redox reaction at room temperature. The CMSs and AgNP-CMSs were characterized using X-ray diffraction, scanning electron microscopy, field emission scanning electron microscopy, Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), and UV-vis spectrophotometry. Though with non-high specific surface area, the AgNP-CMSs exhibited a high adsorption capacity toward methylene blue (MB) in an aqueous solution. The AgNP-CMSs were able to remove all the MB from a solution of 30 mg/L MB in water within 1 min when the adsorbent concentration was 0.12 g/L. The AgNP-CMSs also exhibited good adsorption and photocatalytic activity in the decomposition of aqueous Rhodamine B as well as MB under visible light. FTIR was used to examine the interaction between AgNP-CMSs and MB, and the spectrum and more extra experiments suggest ionic interactions between cationic dyes and the negatively charged groups can be formed but not the presence of abundant π-π conjugations between dye molecules and the aromatic rings. The origin of the photocatalytic activity of AgNP-CMSs was attributed to a surface plasmon resonance (SPR) effect of the silver nanoparticles on the CMSs.

One-step in situ hydrothermal fabrication of octahedral CdS/SnIn4S8 nano-heterojunction for highly efficient photocatalytic treatment of nitrophenol and real pharmaceutical wastewater

Octahedral CdS/SnIn₄S₈ nano-heterojunctions were fabricated by a facile and simple one-step in situ hydrothermal method, and the molar ratio of CdS to SnIn₄S₈ was optimized. The optimal (0.5:1)CdS/SnIn₄S₈ heterojunctions exhibit the highest visible-light photocatalytic activity with 97.1% degradation efficiency of 2-nitrophenol in 120min, which is much higher than those of individual CdS and SnIn₄S₈. The enhanced photocatalytic performance could be attributed to the effective separation and transfer of photogenerated charges originating from the well-matched band gap structures. Of special significance is that (0.5:1)CdS/SnIn₄S₈ can effectively mineralize 2-nitrophenol and real pharmaceutical wastewater. Moreover, CdS/SnIn₄S₈ nano-heterojunctions show excellent reusability in five cycles due to the stable surface composition and chemical valence state.

Visible-light-driven photocatalytic disinfection by S-scheme α-Fe2O3/g-C3N4 heterojunction: Bactericidal performance and mechanism insight

High-performance photocatalytic applications require to develop heterostructures between two semiconductors with matched band energy levels to facilitate charge-carrier separation. The S-scheme photocatalytic system has great potential to be explored, in terms of the improvement of charge separation, however, small efforts have been made in photocatalytic disinfection application. In this study, a non-toxic and low-cost S-scheme photocatalytic system composed of α-Fe₂O₃ and g-C₃N₄ was fabricated by in-suit production of g-C₃N₄ and firstly applied into water disinfection. The α-Fe₂O₃/g-C₃N₄ junction demonstrated an enhanced activity for photocatalytic bacterial inactivation, with the complete inactivation of 7 log₁₀ cfu·mL^-1 of Escherichia coli K-12 cells within 120 min under visible light irradiation. Its logarithmic bacterial inactivation efficiency was nearly 7 times better than that of single g-C₃N₄. The experimental results suggested that the effective prevention of charge-carrier recombination led to an improved generation of reactive oxygen species (ROSs), resulting in impressive disinfection performance. Moreover, the DNA gel electrophoresis experiments validated the reason for the irreversible death of bacteria, which was the leakage and destruction of chromosomal DNA. In addition, this S-scheme heterojunction also showed excellent photocatalytic disinfection performance in authentic water matrices (including tap water, secondary treated sewage effluent, and surface water) under visible light irradiation. Hence, the α-Fe₂O₃/g-C₃N₄ composite has great potential for sustainable and efficient photocatalytic disinfection applications.

In situ fabrication of I-doped Bi2O2CO3/g-C3N4 heterojunctions for enhanced photodegradation activity under visible light

Iodine-doped Bi₂O₂CO₃/g-C₃N₄ heterojunctions consisting of graphitic carbon nitride (g-C₃N₄) and iodine-doped bismutite (Bi₂O₂CO₃) components were successfully in situ synthesized by a one-pot hydrothermal method. Characterizations such as X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and scanning electron microscope (SEM) demonstrated iodine was favorably doped into the Bi₂O₂CO₃ component, of which the {001} facets grew in situ from {002} facets of g-C₃N₄ for the heterostructure construction of I-doped Bi₂O₂CO₃/g-C₃N₄ (IB/CN). The photocatalytic activity of catalysts was evaluated by the degradation efficiency of 1,5-dihydroxynaphthalene under visible light. 1.5-IB/CN with a reasonable iodine doping amount (Bi: I molar ratio = 1.0: 1.5) exhibited the superior photodegradation performance compared to Bi₂O₂CO₃, achieving an 85.5% removal ratio after 100 min illumination. The enhanced activity of 1.5-IB/CN was attributed to both of the heterostructure that promoted the separation of photoinduced carriers and iodine doping that tuned the bandgap for sufficient visible-light harvesting. The degradation intermediates of 1,5-dihydroxynaphthalene in the system were determined and its possible photodegradation pathway was proposed in detail. This study provides a rational approach for enhancing the visible-light catalytic activity of wide-bandgap Bi₂O₂CO₃, and reveals a new perspective on the removal mechanism of organic pollutants.

Towards visible-light photocatalysis for environmental applications: band-gap engineering versus photons absorption-a review

A range of different studies has been performed in order to design and develop photocatalysts that work efficiently under visible (and near-infrared) irradiation as well as to improve photons absorption with improved reactor design. While there is consensus on the importance of photocatalysis for environmental applications and the necessity to utilized solar irradiation (or visible-light) as driving force for these processes, it is not yet clear how to get there. Discussion on the future steps towards visible-light photocatalysis for environmental application is of great interest to scientific and industrial communities and the present paper reviews and discusses the two main approaches, band-gap engineering for efficient solar-activated catalysts and reactor designs for improved photons absorption. Common misconceptions and drawbacks of each technology are also examined together with insights for future progress.

Heterojunction interface of zinc oxide and zinc sulfide promoting reactive molecules activation and carrier separation toward efficient photocatalysis

Heterojunction photocatalysts, which can alleviate the low carrier separation efficiency and insufficient light absorption capacity of a single catalyst, have received widespread attention. However, the specific interfacial structure of the heterojunction and its effect on the photocatalytic reaction is still unclear. Herein, a battery of zinc oxide/zinc sulfide (ZnO@ZnS) heterojunction microspheres with different degrees of sulfuration were successfully constructed via a facile hydrothermal method. The as-prepared photocatalysts shown decent aerobic nitric oxide (NO) oxidation performance under visible light irradiation, and the results of various characterization techniques illustrated that the superior photoactivity could be ascribed to the spatial separation of photoinduced electron-hole pairs due to the synergy of the internal electric field and the band offset. More importantly, density functional theory (DFT) calculations revealed that the heterojunction interface can significantly promote the generation of reactive oxygen species (ROS) and NO⁺ reaction intermediates and thus accelerate the photocatalytic reaction. Finally, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) technology was used to time-dependently monitor the NO oxidation process, revealing the photocatalytic mechanism. This work investigated the role of the heterojunction interface in the gas-phase catalytic reaction, broadening the practical application of the ZnO@ZnS heterojunction.

Porous loofah-sponge-like ternary heterojunction g-C3N4/Bi2WO6/MoS2 for highly efficient photocatalytic degradation of sulfamethoxazole under visible-light irradiation

A novel porous loofah-sponge-like ternary heterojunction g-C₃N₄/Bi₂WO₆/MoS₂ (CN-BM) was prepared via a facile method. The introduction of binary Bi₂WO₆/MoS₂ into g-C₃N₄ could be qualified for constructing reasonable heterostructure while regulating photocatalysts morphology. Benefiting from the unique structure, the ternary heterojunction composites not only inhibited the agglomeration but also exhibited the prominent visible-light harvest capacity and abundant active sites, which could accelerate the photogenerated carriers separation and preserve the robust redox ability. The results showed that the optimized sample (CN-BM2) displayed the excellent degradation efficiency of sulfamethoxazole (SMX) under visible-light irradiation (over 99% within 60 min), and the fitted pseudo-first-order kinetic rate constant reached to 0.089 min^-1, where it was 3.17 times than that of pure CN. Additionally, the radical scavenger experiments and electron spin resonance experiments indicated that the active species super-oxide radical and hole played a major role in the degradation experiment. The charge transfer mechanism was proposed and the main intermediates indicated that the active radicals attacked on the benzene ring and isoxazole ring in SMX, and further mineralized to inorganic molecules eventually.

Removing Cr (VI) in water via visible-light photocatalytic reduction over Cr-doped SrTiO3 nanoplates

It is crucial to develop a high-efficiency visible-light responsive photocatalyst for settling the increasing contamination stemmed from toxic heavy metal ions in wastewater. In this study, Cr-doped SrTiO₃ (CrSTO) nanoplates were synthesized by a facile one-pot solvothermal method with ethylene glycol as both the solvent and morphology controller. The resultant CrSTO nanoplates are about 100 nm in size and 20 nm in thickness, which are composed of SrTiO₃ nanocrystals about 19 nm in diameter. Furthermore, they possess the mesopore 3.0 nm in size, endowing their much higher specific surface area than the commercial SrTiO₃ particles. The Cr element is doped into the crystal lattice of SrTiO₃ by the substitution of Cr³⁺ for Sr²⁺, which enables the absorption edge redshift to the visible light region, thus elevating the visible-light absorption capability. In addition, the CrSTO-0.9 nanoplate with 0.9% Cr element content exhibits the highest photocatalytic performance for the Cr(VI) reduction under visible light irradiation, which can reduce nearly all Cr(VI) within 3.5 h and preserve the excellent stability after six recycles. This kind of CrSTO nanoplates may serve as a potential and promising photocatalyst for efficient Cr(VI) removal in wastewater.

Degradation of gaseous formaldehyde via visible light photocatalysis using multi-element doped titania nanoparticles

This study developed a modified titanium dioxide photocatalyst doped with multi-element synthesized via sol-gel process to productize a novel photocatalyst. The study includes degradation of gaseous formaldehyde under visible light using the synthesized novel titanium dioxide photocatalyst. Varying molar ratios from 0 to 2 percent (%_mole in titanium dioxide) of ammonium fluoride, silver nitrate and sodium tungstate as dopant precursors for nitrogen, fluorine, silver and tungsten were used. Photodegradation of gaseous formaldehyde was examined on glass tubular reactors illuminated with blue light emitting diodes (LEDs) using immobilized photocatalyst. The photocatalytic yield is analyzed based on the photocatalyst surface chemical properties via X-ray Photoelectron Spectroscopy (XPS), Fourier Transform Infrared (FTIR) Spectrophotometry, Brunauer-Emmett-Teller (BET) and X-ray Diffraction (XRD) characterization results. The applied modifications enhanced the visible light capability of the catalyst in comparison to the undoped catalyst and commercially available Degussa P-25, such that it photocatalytically degrades 88.1% of formaldehyde in 120 min. Synthesized titanium dioxide photocatalyst exhibits a unique spin orbital at 532.07 eV and 533.27 eV that came from the hybridization of unoccupied Ti d(t_2g) levels.

Flexible zirconium doped strontium titanate nanofibrous membranes with enhanced visible-light photocatalytic performance and antibacterial activities

Constructing flexible perovskite structured ceramic fibrous materials would potentially facilitate applications of photocatalysis, wearable devices, and energy storage. However, current perovskite structured ceramic fibrous materials were fragile with small deformation resistance, which have limited their wide applications. Herein, flexible zirconium doped strontium titanate (ZSTO) nanofibrous membranes were fabricated via combining sol-gel and electrospinning methods. The microstructures (pore and crystal) of ZSTO nanofibers were affected by zirconium doping contents and closely relevant to flexibility of resultant membranes. The probable mechanism for flexibility of ZSTO nanofibrous membranes was presented. Furthermore, the silver phosphate modified ZSTO (AZSTO) exhibited superior photocatalytic performance towards tetracycline hydrochloride (TCHC) and antibacterial performance towards Gram-negative and Gram-positive bacteria with visible-light irradiation, including 85% degradation towards TCHC within 60 min, >99.99% inhibition rate and > 3 mm inhibition zone against Gram bacteria. Furthermore, the·superoxide free radical (O₂^-) and holes played significant roles in the degradation of TCHC that verified by radical scavenger experiment. Additionally, the membranes exhibited good reusability over five cycles without tedious recycling operations needed for micro/nanoparticle-based catalysts. The successful fabrication of ZSTO nanofibrous membranes would provide a new insight into photocatalysts, antibacterial materials, and wearable device.