Influence of thermo-mechanical aging on fracture resistance and wear of digitally standardized chairside computer-aided-designed/computer-assisted-manufactured restorations

OBJECTIVES

To investigate the influence of thermal cycling and mechanical loading (TCML) aging on fracture resistance and wear behavior of various chairside computer-aided-designed/computer-assisted-manufactured (CAD/CAM) premolar crowns cemented on standardized tooth abutments.

METHODS

Eighty chairside CAD/CAM crowns were prepared using lithium disilicate (IPS e.max CAD; EM), zirconia-infiltrated lithium silicate (Celtra Duo; CD), polymer-infiltrated ceramic network (Vita Enamic; VE), and resin nanoceramics (Cerasmart; CS) (n = 20). The specimens were divided into two groups (n = 10). In one group, they were subjected to TCML: thermocycling (6000 cycles in distilled water at 5-55 °C) and mechanical loading (50 N for 1.2 × 10⁶ cycles), while in control group they were stored in distilled water (37 °C for 24 h). The fracture load, height loss, and volume wear of the crowns were measured after TCML. Fractography was performed on fractured specimens. Data were analyzed using analysis of variance and multiple comparison tests (α=0.05).

RESULTS

The mean fracture loads of EM and CD were significantly higher than those of EC and CS (p<0.05). There was no significant change in the fracture load of any CAD/CAM crowns after TCML (p>0.05). CS exhibited a significantly higher volume wear than the other materials investigated. The wear tracts of all TCML crowns acted as failure origins during the fracture test.

CONCLUSIONS

The fracture resistance of glass-ceramic CAD/CAM crowns was significantly higher than that of resin composite crowns. A 5-year TCML aging did not affect the fracture resistance of CAD/CAM crowns investigated. However, TCML treatment produces a larger wear track in CS than in other materials.

CLINICAL SIGNIFICANCE

Appropriate chairside CAD/CAM restorative material should be selected for successful clinical practice after considering the fracture and wear resistance of the crowns.

Wear behavior of a microhybrid composite vs. a nanocomposite in the treatment of severe tooth wear patients: A 5-year clinical study

OBJECTIVE

This study aimed to compare the wear behavior of a microhybrid composite vs. a nanocomposite in patients suffering from severe tooth wear.

METHODS

A convenience sample of 16 severe tooth wear patients from the Radboud Tooth Wear Project was included. Eight of them were treated with a microhybrid composite (Clearfil APX, Kuraray) and the other eight with a nanocomposite (Filtek Supreme XTE, 3M). The Direct Shaping by Occlusion (DSO) technique was used for all patients. Clinical records were collected after 1 month (baseline) as well as 1, 3 and 5 years post-treatment. The maximum height loss at specific areas per tooth was measured with Geomagic Qualify software. Intra-observer reliability was tested with paired t-tests, while multilevel logistic regression analyses were used to compare odds ratios (OR) of "large amount of wear".

RESULTS

Intra-observer reliability tests confirmed that two repeated measurements agreed well (p > 0.136). For anterior mandibular teeth, Filtek Supreme showed significantly less wear than Clearfil APX; in maxillary anterior teeth, Clearfil APX showed significantly less wear (OR _material = 0.28, OR _{jaw position} = 0.079, p < 0.001). For premolar and molar teeth, Filtek Supreme showed less wear in bearing cusps, whereas Clearfil APX showed less wear in non-bearing cusps (premolar: OR _material = 0.42, OR _{bearing condition} = 0.18, p = 0.001; molar: OR _material = 0.50, OR _{bearing condition} = 0.14, p < 0.001).

SIGNIFICANCE

Nanocomposite restorations showed significantly less wear at bearing cusps, whereas microhybrid composite restorations showed less wear at non-bearing cusps and anterior maxillary teeth.

Nanoscopic wear behavior of dentinogenesis imperfecta type II tooth dentin

OBJECTIVES

The aim of this study was to investigate the wear behavior of Dentinogenesis imperfecta type II (DGI-II) dentin and elucidate the correlation between its tribological properties and components.

METHODS

The mid-coronal dentin of normal and DGI-II teeth were divided into two groups: perpendicular and parallel to the dentin tubules. The microstructure of dentin was detected using atomic force microscopy (AFM). The wear behavior of dentin was evaluated by nanoscratch tests and scanning electron microscopy (SEM). Meanwhile, changes in molecular groups and chemical composition were analyzed by Raman and Energy-Dispersive X-ray (EDX) tests, respectively. Nanohardness was also evaluated.

RESULTS

AFM images of DGI-II dentin illustrated a decrease in the number of tubules and the tubule diameter. Nanoscratch test showed a higher friction coefficient and a greater depth-of-scratch in DGI-II dentin. The wear resistance of DGI-II dentin was reduced independent of tubule orientation. EDX results indicated that DGI-II dentin mineral content decreased and Raman spectra results showed DGI-II dentin had a decreased collagen matrix structure stability coupled with hypomineralization. Furthermore, a significant reduction in nanohardness and elastic modulus of DGI-II dentin was observed. Regression analysis revealed a close correlation between dentin components and inferior wear resistance.

CONCLUSIONS

All results indicated the wear behavior of DGI-II dentin was significantly deteriorated, presumably caused by the disorder in microstructures and the reduction of chemical composition.

Flexural properties and wear behavior of computer-aided design/computer-aided manufacturing resin blocks

This study investigates the flexural properties, Knoop hardness number (KHN), and wear behavior of computer-aided design and computer-aided manufacturing (CAD/CAM) resin blocks and compares these values with those of conventional resin composites for direct restoration (RCDs). Four CAD/CAM resin blocks and two RCDs are compared. Ten specimens per material are used to obtain the flexural properties according to ISO 6872 specifications, and five specimens per material are used for KHN measurement. For sliding impact wear testing, twelve specimens are prepared. Confocal laser scanning microscopy (LSM) is used to determine maximum facet depth and volume loss. Polished material surfaces and worn surfaces after wear testing are observed using scanning electron microscopy and LSM. While measured flexural properties and KHN are found to be material-dependent, CAD/CAM resin blocks exhibit higher wear resistance than RCDs. CAD/CAM resin blocks polymerized at high-pressure and high-temperature are found to exhibit wear behaviors far superior to those of RCDs.

In vitro wear behavior of restorative resin composites against bovine enamel

The purpose of this study was to clarify the effects of fabrication method of restorative resin-based composites on its wear using enamel as antagonist teeth. Wear evaluation was performed via two-body wear test using hemispherical samples of restorative resin-based composite (abrader specimen) fabricated through direct restoration method, indirect restoration method, and CAD/CAM, and bovine enamel (substrate specimen). As a result, there was a difference in wear volume between resin-based composite and bovine enamel depending on the fabrication method. Resin composite used for indirect restoration method showed more wear in both the abrader and substrate specimens. Resin composite used for CAD/CAM crowns showed greater wear volume in the abrader specimen. In conclusion, results clarified that fabrication method of restorative resin-based composite has an influence on the wear of the resin composite itself and enamel as antagonist teeth.

In vivo wear of CAD-CAM composite versus lithium disilicate full coverage first-molar restorations: a pilot study over 2 years

Objectives

To present a digital approach to measure and compare material wear behavior of antagonistic first molar restorations made of an experimental CAD/CAM composite (COMP) and lithium disilicate ceramic (LS2) in patients with reconstructed vertical dimension of occlusion (VDO) after generalized hard tissue loss.

Methods

A total of 12 patients underwent complete full jaw rehabilitation with full occlusal coverage restorations made either of COMP or LS2. The first molar restorations (n = 48) were chosen for wear examination. At annual recall appointments, polyether impressions were taken, and resulting plaster casts were digitalized using a laboratory scanner. Mean observation period was 371 days for first and 769 days for second year. The resulting 96 datasets were analyzed by superimposition of 3-D datasets using an iterative best-fit method. Based on the superimposition data, the wear rates of the occlusal contact areas (OCAs) were calculated.

Results

For antagonistic restorations made of COMP, the average wear rate was 24.8 ± 13.3 μm/month, while for LS2, it was 9.5 ± 4.3 μm/month in first year, with significant differences (p < 0.0001) between the materials. In second year, monthly wear rates decreased significantly for both materials: COMP (16.2 ± 10.7 μm/month) and LS2 (5.5 ± 3.3 μm/month). Statistical comparison between wear time showed significant differences for both materials: COMP p < 0.037 and LS2 p < 0.001. A logarithmic fit (COMP R² = 0.081; LS2 R² = 0.038) of the data was calculated to estimate the wear progression.

Significance

In patients with reconstructed VDO, restorations made of LS2 show a more stable wear behavior than ones out of experimental CAD/CAM composite. In cases of complete rehabilitation, load bearing CAD/CAM-composite restorations should be critically considered for application due to their occlusal wear behavior. However, when choosing a restorative material, not only the functional occlusal stability should be taken into account but also the prospect of minimally invasive treatment with maximum preservation of natural tooth structures.

Influence of different curing modes on flexural properties, fracture toughness, and wear behavior of dual-cure provisional resin-based composites

We investigated the influence of different curing modes on the mechanical properties and wear behavior of dual-cure provisional resin-based composites (DCPRs). Three DCPRs and a self-curing bis-acryl provisional resin-based composite were used. Flexural strength (σ_F), elastic modulus (E), resilience (R), and fracture toughness (K_IC) were measured. The specimens were fabricated with and without light irradiation, stored in distilled water at 37°C for 24 h, and subjected to 5,000 or 10,000 thermal cycles. For sliding impact wear testing, 12 specimens were prepared with and without light irradiation. The maximum facet depth and volume loss were determined using a noncontact profilometer. Some of the mechanical properties and wear behavior of DCPRs are affected by light irradiation. This study indicated that proper light irradiation is important in polymerization process of the DCPRs to enhance the wear resistance and some mechanical properties.

Two-body wear behavior of human enamel versus monolithic zirconia, lithium disilicate, ceramometal and composite resin

PURPOSE

To investigate and compare the surface roughness (SR), weight and height of monolithic zirconia (MZ), ceramometal (CM), lithium disilicate glass ceramic (LD), composite resin (CR), and their antagonistic human teeth enamel.

MATERIALS AND METHODS

32 disc shaped specimens for the four test materials (n=8) and 32 premolars were prepared and randomly divided. SR, weight and height of the materials and the antagonist enamel were recorded before and after subjecting the specimens to 240,000 wear-cycles (49 N/0.8 Hz/5℃/50℃). SR, height, weight, and digital microscopic qualitative evaluation were measured.

RESULTS

CM (0.23 + 0.08 µm) and LD (0.68 + 0.16 µm) exhibited the least and highest mean difference in the SR, respectively. ANOVA revealed significance (P=.001) between the materials for the SR. Paired T-Test showed significance (P<.05) for the pre- and post-SR for all the materials. For the antagonistic enamel, no significance (P=.987) was found between the groups. However, the pre- and post-SR values of all the enamel groups were significant (P<.05). Wear cycles had significant effect on enamel weight loss against all the materials (P<.05). CR and MZ showed the lowest and highest height loss of 0.14 mm and 0.46 mm, respectively.

CONCLUSION

MZ and CM are more resistant to SR against the enamel than LD and CR. Enamel worn against test materials showed similar SR. Significant variations in SR values for the tested materials (MZ, LD, CM, and CR) against the enamel were found. Wear simulation significantly affected the enamel weight loss against all the materials, and enamel antagonist against MZ and CM showed more height loss.

Wear behavior of light-cured resin composites with bimodal silica nanostructures as fillers

To enhance wear behavior of resin composites, bimodal silica nanostructures including silica nanoparticles and silica nanoclusters were prepared and proposed as fillers. The silica nanoclusters, a combination of individually dispersed silica nanoparticles and their agglomerations, with size distribution of 0.07-2.70 μm, were fabricated by the coupling reaction between amino and epoxy functionalized silica nanoparticles, which were obtained by the surface modification of silica nanoparticles (~70 nm) using 3-aminopropyl triethoxysilane (APTES) and 3-glycidoxypropyl trimethoxysilane (GPS) as coupling agents, respectively. Silica nanoparticles and nanoclusters were then silanized with 3-methacryloxypropyl trimethoxysilane (γ-MPS) to prepare composites by mixing with bisphenol A glycerolate dimethacrylate (Bis-GMA) and tri (ethylene glycol) dimethacrylate (TEGDMA). Experimental composites with various filler compositions were prepared and their wear behaviors were assessed in this work. The results suggested that composites with increasing addition of silica nanoparticles in co-fillers possessed lower wear volume and smoother worn surface. Particularly, the composite 53:17 with the optimum weight ratio of silica nanoparticles and silica nanoclusters presented the excellent wear behavior with respect to that of the commercial Esthet-X, although the smallest wear volume was achieved by Z350 XT. The introduction of bimodal silica nanostructures as fillers might provide a new sight for the design of resin composites with significantly improved wear resistance.