Alkaline Degradation of Plant Fiber Reinforcements in Geopolymer: A Review

Plant fibers (PFs), such as hemp, Coir, and straw, are abundant in resources, low in price, light weight, biodegradable, have good adhesion to the matrix, and have a broad prospect as reinforcements. However, the degradation of PFs in the alkaline matrix is one of the main factors that affects the durability of these composites. PFs have good compatibility with cement and the geopolymer matrix. They can induce gel growth of cement-based materials and have a good toughening effect. The water absorption of the hollow structure of the PF can accelerate the degradation of the fiber on the one hand and serve as the inner curing fiber for the continuous hydration of the base material on the other. PF is easily deteriorated in the alkaline matrix, which has a negative effect on composites. The classification and properties of PFs, the bonding mechanism of the interface between PF reinforcements and the matrix, the water absorption of PF, and its compatibility with the matrix were summarized. The degradation of PFs in the alkaline matrix and solution, drying and wetting cycle conditions, and high-temperature conditions were reviewed. Finally, some paths to improve the alkaline degradation of PF reinforcement in the alkaline matrix were proposed.

Durability of Cellulosic-Fiber-Reinforced Geopolymers: A Review

Geopolymers have high early strength, fast hardening speed and wide sources of raw materials, and have good durability properties such as high temperature resistance and corrosion resistance. On the other hand, there are abundant sources of plant or cellulose fibers, and it has the advantages of having a low cost, a light weight, strong adhesion and biodegradability. In this context, the geopolymer sector is considering cellulose fibers as a sustainable reinforcement for developing composites. Cellulosic-fiber-reinforced geopolymer composites have broad development prospects. This paper presents a review of the literature research on the durability of cellulosic-fiber-reinforced geopolymer composites in recent years. In this paper, the typical properties of cellulose fibers are summarized, and the polymerization mechanism of geopolymers is briefly discussed. The factors influencing the durability of cellulosic-fiber-reinforced geopolymer composites were summarized and analyzed, including the degradation of fibers in a geopolymer matrix, the toughness of fiber against matrix cracking, the acid resistance, and resistance to chloride ion penetration, high temperature resistance, etc. Finally, the influence of nanomaterials on the properties of geopolymer composites and the chemical modification of fibers are analyzed, and the research on cellulosic-fiber-reinforced geopolymer composites is summarized.

Evaluation of the Repolished Surface Properties of a Resin Composite Employing Structural Coloration Technology

Resin composites employing structural coloration have recently been developed. These resins match to various tooth shades despite being a single paste. To accomplish this, the filler and base resin are tightly bonded, which is thought to provide excellent discoloration resistance. Here, we investigated the surface properties of one of these resins, including the discoloration of the repolished surface. We developed an innovative in vitro method to adjust the repolished surface, in which structural degradation is removed according to scanning electron microscopy (SEM) observation rather than by the naked eye. The resin samples (20 mm (length) × 10 mm (width) × 4 mm (depth)) were manufactured using this resin material. After accelerated aging of the resin by alkaline degradation, the resin was repolished and the discoloration (ΔE*ab), surface roughness (the arithmetic mean roughness (Ra)), and glossiness (the 60° specular) were measured. SEM observation showed that the appearance of the bond between the organic composite filler and base resin on the repolished surface was different from that on the mirror-polished surface. This revealed that according to our in vitro method it was difficult to make the repolished surface structurally identical to the mirror-polished surface. Among the properties of the repolished surface, the degree of discoloration did not change despite the rougher and less glossy surface. It can be concluded that the factors that induce discoloration in this resin composite are independent of the surface roughness and glossiness.

Green synthesis of silk sericin-capped silver nanoparticles and their potent anti-bacterial activity

In this study, a 'green chemistry' approach was introduced to synthesize silk sericin (SS)-capped silver nanoparticles (AgNPs) under an alkaline condition (pH 11) using SS as a reducing and stabilizing agent instead of toxic chemicals. The SS-capped AgNPs were successfully synthesized at various concentrations of SS and AgNO3, but the yields were different. A higher yield of SS-capped AgNPs was obtained when the concentrations of SS and AgNO3 were increased. The SS-capped AgNPs showed a round shape and uniform size with diameter at around 48 to 117 nm. The Fourier transform infrared (FT-IR) spectroscopy result proved that the carboxylate groups obtained from alkaline degradation of SS would be a reducing agent for the generation of AgNPs while COO- and NH2 + groups stabilized the AgNPs and prevented their precipitation or aggregation. Furthermore, the SS-capped AgNPs showed potent anti-bacterial activity against various gram-positive bacteria (minimal inhibitory concentration (MIC) 0.008 mM) and gram-negative bacteria (MIC ranging from 0.001 to 0.004 mM). Therefore, the SS-capped AgNPs would be a safe candidate for anti-bacterial applications.

New azaphilones, seco-chaetomugilins A and D, produced by a marine-fish-derived Chaetomium globosum

Seco-chaetomugilins A and D were isolated from a strain of Chaetomium globosum that was originally isolated from the marine fish Mugil cephalus, and their absolute stereostructures were elucidated on the basis of spectroscopic analyses, including 1D and 2D NMR techniques, along with the chemical transformation from known chaetomugilins A and D. Seco-chaetomugilin D exhibited growth inhibitory activity against cultured P388, HL-60, L1210, and KB cells.