Advances in skin regeneration: application of electrospun scaffolds

The paucity of cellular and molecular signals essential for normal wound healing makes severe dermatological ulcers stubborn to heal. The novel strategies of skin regenerative treatments are focused on the development of biologically responsive scaffolds accompanied by cells and multiple biomolecules resembling structural and biochemical cues of the natural extracellular matrix (ECM). Electrospun nanofibrous scaffolds provide similar architecture to the ECM leading to enhancement of cell adhesion, proliferation, migration and neo tissue formation. This Review surveys the application of biocompatible natural, synthetic and composite polymers to fabricate electrospun scaffolds as skin substitutes and wound dressings. Furthermore, the application of biomolecules and therapeutic agents in the nanofibrous scaffolds viz growth factors, genes, antibiotics, silver nanoparticles, and natural medicines with the aim of ameliorating cellular behavior, wound healing, and skin regeneration are discussed.

A Review on Properties of Natural and Synthetic Based Electrospun Fibrous Materials for Bone Tissue Engineering

Bone tissue engineering is an interdisciplinary field where the principles of engineering are applied on bone-related biochemical reactions. Scaffolds, cells, growth factors, and their interrelation in microenvironment are the major concerns in bone tissue engineering. Among many alternatives, electrospinning is a promising and versatile technique that is used to fabricate polymer fibrous scaffolds for bone tissue engineering applications. Copolymerization and polymer blending is a promising strategic way in purpose of getting synergistic and additive effect achieved from either polymer. In this review, we summarize the basic chemistry of bone, principle of electrospinning, and polymers that are used in bone tissue engineering. Particular attention will be given on biomechanical properties and biological activities of these electrospun fibers. This review will cover the fundamental basis of cell adhesion, differentiation, and proliferation of the electrospun fibers in bone tissue scaffolds. In the last section, we offer the current development and future perspectives on the use of electrospun mats in bone tissue engineering.

Patterning methods for polymers in cell and tissue engineering

Polymers provide a versatile platform for mimicking various aspects of physiological extracellular matrix properties such as chemical composition, rigidity, and topography for use in cell and tissue engineering applications. In this review, we provide a brief overview of patterning methods of various polymers with a particular focus on biocompatibility and processability. The materials highlighted here are widely used polymers including thermally curable polydimethyl siloxane, ultraviolet-curable polyurethane acrylate and polyethylene glycol, thermo-sensitive poly(N-isopropylacrylamide) and thermoplastic and conductive polymers. We also discuss how micro- and nanofabricated polymeric substrates of tunable elastic modulus can be used to engineer cell and tissue structure and function. Such synergistic effect of topography and rigidity of polymers may be able to contribute to constructing more physiologically relevant microenvironment.

Electrospun Nanofibers: Recent Applications in Drug Delivery and Cancer Therapy

Polymeric nanofibers (NFs) have been extensively reported as a biocompatible scaffold to be specifically applied in several researching fields, including biomedical applications. The principal researching lines cover the encapsulation of antitumor drugs for controlled drug delivery applications, scaffolds structures for tissue engineering and regenerative medicine, as well as magnetic or plasmonic hyperthermia to be applied in the reduction of cancer tumors. This makes NFs useful as therapeutic implantable patches or mats to be implemented in numerous biomedical researching fields. In this context, several biocompatible polymers with excellent biocompatibility and biodegradability including poly lactic-co-glycolic acid (PLGA), poly butylcyanoacrylate (PBCA), poly ethylenglycol (PEG), poly (ε-caprolactone) (PCL) or poly lactic acid (PLA) have been widely used for the synthesis of NFs using the electrospun technique. Indeed, other types of polymers with stimuli-responsive capabilities has have recently reported for the fabrication of polymeric NFs scaffolds with relevant biomedical applications. Importantly, colloidal nanoparticles used as nanocarriers and non-biodegradable structures have been also incorporated by electrospinning into polymeric NFs for drug delivery applications and cancer treatments. In this review, we focus on the incorporation of drugs into polymeric NFs for drug delivery and cancer treatment applications. However, the principal novelty compared with previously reported publications is that we also focus on recent investigations concerning new strategies that increase drug delivery and cancer treatments efficiencies, such as the incorporation of colloidal nanoparticles into polymeric NFs, the possibility to fabricate NFs with the capability to respond to external environments, and finally, the synthesis of hybrid polymeric NFs containing carbon nanotubes, magnetic and gold nanoparticles, with magnetic and plasmonic hyperthermia applicability.

Redox-Responsive Core-Cross-Linked Block Copolymer Micelles for Overcoming Multidrug Resistance in Cancer Cells

Success of chemotherapy as a treatment for cancer has been often inhibited by multidrug resistance (MDR) of the cancer cells. There is a clear need to generate strategies to overcome this resistance. In this work, we have developed redox-responsive and core-cross-linked micellar nanocarriers using poly(ethylene glycol)-block-poly(2-(methacryloyloxy)ethyl 5-(1,2-dithiolan-3-yl)pentanoate) diblock copolymers (PEG-b-PLAHEMA) with tunable swelling properties for the delivery of drugs toward drug-sensitive MDA-MB-231 and drug-resistant MDA-MB-231 (231R) cancer cells. PEG-b-PLAHEMA containing varying number of 2-(methacryloyloxy)ethyl 5-(1,2-dithiolan-3-yl)pentanoate (LAHEMA) units were synthesized by employing the reversible addition-fragmentation chain transfer polymerization technique. The block copolymer self-assembly, cross-linking induced by reduction, and de-cross-linking triggered time-dependent controlled swelling of micelles were studied using dynamic light scattering, fluorescence spectroscopy, and transmission electron microscopy. In vitro cytotoxicity, cellular uptake efficiency, and glutathione-responsive anticancer activity of doxorubicin (DOX) encapsulated in core-cross-linked block copolymer micelles (CCMs) toward both drug-sensitive and drug-resistant cancer cell lines were evaluated. Significant reduction in IC₅₀ was observed by DOX-loaded CCMs toward drug-resistant 231R cancer cell lines, which was further improved by coencapsulating DOX and verapamil (a P-glycoprotein inhibitor) in CCMs. Thus, these reduction-sensitive biocompatible CCMs with tunable swelling property are very promising in overcoming MDR in cancer cells.

Water-Soluble, Biocompatible Polyphosphazenes with Controllable and pH-Promoted Degradation Behavior

The synthesis of a series of novel, water-soluble poly(organophosphazenes) prepared via living cationic polymerization is presented. The degradation profiles of the polyphosphazenes prepared are analyzed by GPC, 31P NMR spectroscopy, and UV-Vis spectroscopy in aqueous media and show tunable degradation rates ranging from days to months, adjusted by subtle changes to the chemical structure of the polyphosphazene. Furthermore, it is observed that these polymers demonstrate a pH-promoted hydrolytic degradation behavior, with a remarkably faster rate of degradation at lower pH values. These degradable, water soluble polymers with controlled molecular weights and structures could be of significant interest for use in aqueous biomedical applications, such as polymer therapeutics, in which biological clearance is a requirement and in this context cell viability tests are described which show the non-toxic nature of the polymers as well as their degradation intermediates and products.

Integrating Emerging Polymer Chemistries for the Advancement of Recyclable, Biodegradable, and Biocompatible Electronics

Through advances in molecular design, understanding of processing parameters, and development of non-traditional device fabrication techniques, the field of wearable and implantable skin-inspired devices is rapidly growing interest in the consumer market. Like previous technological advances, economic growth and efficiency is anticipated, as these devices will enable an augmented level of interaction between humans and the environment. However, the parallel growing electronic waste that is yet to be addressed has already left an adverse impact on the environment and human health. Looking forward, it is imperative to develop both human- and environmentally-friendly electronics, which are contingent on emerging recyclable, biodegradable, and biocompatible polymer technologies. This review provides definitions for recyclable, biodegradable, and biocompatible polymers based on reported literature, an overview of the analytical techniques used to characterize mechanical and chemical property changes, and standard policies for real-life applications. Then, various strategies in designing the next-generation of polymers to be recyclable, biodegradable, or biocompatible with enhanced functionalities relative to traditional or commercial polymers are discussed. Finally, electronics that exhibit an element of recyclability, biodegradability, or biocompatibility with new molecular design are highlighted with the anticipation of integrating emerging polymer chemistries into future electronic devices.

Guided Tissue and Bone Regeneration Membranes: A Review of Biomaterials and Techniques for Periodontal Treatments

This comprehensive review provides an in-depth analysis of the use of biomaterials in the processes of guided tissue and bone regeneration, and their indispensable role in dental therapeutic interventions. These interventions serve the critical function of restoring both structural integrity and functionality to the dentition that has been lost or damaged. The basis for this review is laid through the exploration of various relevant scientific databases such as Scopus, PubMed, Web of science and MEDLINE. From a meticulous selection, relevant literature was chosen. This review commences by examining the different types of membranes used in guided bone regeneration procedures and the spectrum of biomaterials employed in these operations. It then explores the manufacturing technologies for the scaffold, delving into their significant impact on tissue and bone regenerations. At the core of this review is the method of guided bone regeneration, which is a crucial technique for counteracting bone loss induced by tooth extraction or periodontal disease. The discussion advances by underscoring the latest innovations and strategies in the field of tissue regeneration. One key observation is the critical role that membranes play in guided reconstruction; they serve as a barrier, preventing the entry of non-ossifying cells, thereby promoting the successful growth and regeneration of bone and tissue. By reviewing the existing literature on biomaterials, membranes, and scaffold manufacturing technologies, this paper illustrates the vast potential for innovation and growth within the field of dental therapeutic interventions, particularly in guided tissue and bone regeneration.

Flexible Electronic Synapses for Face Recognition Application with Multimodulated Conductance States

An artificial synaptic device with a continuous weight modulation behavior is fundamental to the hardware implementation of the bioinspired neuromorphic systems. Recent reported synaptic devices have a less number of conductance states, which is not beneficial for the continuous modulation of weights in neuromorphic computing. Preparing a device with as many conductance states as possible is of great significance to the development of brain-inspired neuromorphic computing. Here, we present a two-terminal flexible organic synaptic device with ultra-multimodulated conductance states, realizing a face recognition functionality with a strong error-tolerant nature for the first time. The device shows an excellent long-term potentiation or long-term depression behavior and reliability after 1000 folded destructive tests. There are 600 continuous ultra-multimodulated conductance states, which can be used to realize the great face recognition capability. The recognition rates were 95.2% and above 90% for the initial and 15% noise pixel images, respectively. The strong error-tolerant nature indicates a potential application of a flexible organic artificial synaptic device with ultra-multimodulated conductance states in the large-scale neuromorphic systems.

Holistically Engineered Polymer-Polymer and Polymer-Ion Interactions in Biocompatible Polyvinyl Alcohol Blends for High-Performance Triboelectric Devices in Self-Powered Wearable Cardiovascular Monitorings

The capability of sensor systems to efficiently scavenge their operational power from stray, weak environmental energies through sustainable pathways could enable viable schemes for self-powered health diagnostics and therapeutics. Triboelectric nanogenerators (TENG) can effectively transform the otherwise wasted environmental, mechanical energy into electrical power. Recent advances in TENGs have resulted in a significant boost in output performance. However, obstacles hindering the development of efficient triboelectric devices based on biocompatible materials continue to prevail. Being one of the most widely used polymers for biomedical applications, polyvinyl alcohol (PVA) presents exciting opportunities for biocompatible, wearable TENGs. Here, the holistic engineering and systematic characterization of the impact of molecular and ionic fillers on PVA blends' triboelectric performance is presented for the first time. Triboelectric devices built with optimized PVA-gelatin composite films exhibit stable and robust triboelectricity outputs. Such wearable devices can detect the imperceptible skin deformation induced by the human pulse and capture the cardiovascular information encoded in the pulse signals with high fidelity. The gained fundamental understanding and demonstrated capabilities enable the rational design and holistic engineering of novel materials for more capable biocompatible triboelectric devices that can continuously monitor vital physiological signals for self-powered health diagnostics and therapeutics.

Preparation of Well-Dispersed Chitosan/Alginate Hollow Multilayered Microcapsules for Enhanced Cellular Internalization

Hollow multilayered capsules have shown massive potential for being used in the biomedical and biotechnology fields, in applications such as cellular internalization, intracellular trafficking, drug delivery, or tissue engineering. In particular, hollow microcapsules, developed by resorting to porous calcium carbonate sacrificial templates, natural-origin building blocks and the prominent Layer-by-Layer (LbL) technology, have attracted increasing attention owing to their key features. However, these microcapsules revealed a great tendency to aggregate, which represents a major hurdle when aiming for cellular internalization and intracellular therapeutics delivery. Herein, we report the preparation of well-dispersed polysaccharide-based hollow multilayered microcapsules by combining the LbL technique with an optimized purification process. Cationic chitosan (CHT) and anionic alginate (ALG) were chosen as the marine origin polysaccharides due to their biocompatibility and structural similarity to the extracellular matrices of living tissues. Moreover, the inexpensive and highly versatile LbL technology was used to fabricate core-shell microparticles and hollow multilayered microcapsules, with precise control over their composition and physicochemical properties, by repeating the alternate deposition of both materials. The microcapsules' synthesis procedure was optimized to extensively reduce their natural aggregation tendency, as shown by the morphological analysis monitored by advanced microscopy techniques. The well-dispersed microcapsules showed an enhanced uptake by fibroblasts, opening new perspectives for cellular internalization.

Bioinstructive Layer-by-Layer-Coated Customizable 3D Printed Perfusable Microchannels Embedded in Photocrosslinkable Hydrogels for Vascular Tissue Engineering

The development of complex and large 3D vascularized tissue constructs remains the major goal of tissue engineering and regenerative medicine (TERM). To date, several strategies have been proposed to build functional and perfusable vascular networks in 3D tissue-engineered constructs to ensure the long-term cell survival and the functionality of the assembled tissues after implantation. However, none of them have been entirely successful in attaining a fully functional vascular network. Herein, we report an alternative approach to bioengineer 3D vascularized constructs by embedding bioinstructive 3D multilayered microchannels, developed by combining 3D printing with the layer-by-layer (LbL) assembly technology, in photopolymerizable hydrogels. Alginate (ALG) was chosen as the ink to produce customizable 3D sacrificial microstructures owing to its biocompatibility and structural similarity to the extracellular matrices of native tissues. ALG structures were further LbL coated with bioinstructive chitosan and arginine–glycine–aspartic acid-coupled ALG multilayers, embedded in shear-thinning photocrosslinkable xanthan gum hydrogels and exposed to a calcium-chelating solution to form perfusable multilayered microchannels, mimicking the biological barriers, such as the basement membrane, in which the endothelial cells were seeded, denoting an enhanced cell adhesion. The 3D constructs hold great promise for engineering a wide array of large-scale 3D vascularized tissue constructs for modular TERM strategies.

A simple approach for synthesis, characterization and bioactivity of bovine bones to fabricate the polyurethane nanofiber containing hydroxyapatite nanoparticles

In the present study, we had introduced polyurethane (PU) nanofibers that contain hydroxyapatite (HAp) nanoparticles (NPs) as a result of an electrospinning process. A simple method that does not depend on additional foreign chemicals had been employed to synthesize HAp NPs through the calcination of bovine bones. Typically, a colloidal gel consisting of HAp/PU had been electrospun to form nanofibers. In this communication, physiochemical aspects of prepared nanofibers were characterized by FE-SEM, TEM and TEM-EDS, which confirmed that nanofibers were well-oriented and good dispersion of HAp NPs, over the prepared nanofibers. Parameters, affecting the utilization of the prepared nanofibers in various nano-biotechnological fields have been studied; for instance, the bioactivity of the produced nanofiber mats was investigated while incubating in simulated body fluid (SBF). The results from incubation of nanofibers, indicated that incorporation of HAp strongly activates the precipitation of the apatite-like particles, because of the HAp NPs act as seed, that accelerate crystallization of the biological HAp from the utilized SBF.

Synthesis and characterisation of iron oxide nanoparticles conjugated with epidermal growth factor receptor (EGFR) monoclonal antibody as MRI contrast agent for cancer detection

The aim of this study is to synthesise superparamagnetic iron oxide nanoparticles conjugated with anti-epidermal growth factor receptor monoclonal antibody (ANTI-EGFR-SPION) and investigate its physicochemical characterisation and biocompatibility as a targeted magnetic resonance imaging (MRI) contrast agent for the EGFR-specific detection in EGFR expressing tumour cells. These particles employed biocompatible polymers, poly(D,L-lactide-co-glycolide) (PLGA) and polyethylene glycol aldehyde (PEG-aldehyde), to increase the half-life of particles in circulation and reduce their side effects. The Fe₃O₄-loaded PLGA-PEG-aldehyde nanoparticles were prepared by a modified water-in-oil-in-water double emulsion method. The EGFR antibody was conjugated to the surface of SPIONs using the aldehyde-amine reaction. Synthesised conjugates (nanoprobes) were characterised using Fourier transform infrared spectrophotometry, dynamic light scattering, transmission electron microscopy images, and vibrating-sample magnetometery, and the results showed that the conjugation was successful. The mean diameter of nanoprobes was about 25 nm. These nanoprobes exhibited excellent water-solubility, stability, and biocompatibility. Meanwhile, MR susceptibility test proved that synthesised nanoprobes can be managed for negative contrast enhancement. The results of this study suggested the potential use of these nanoprobes for non-invasive molecular MRI in EGFR detection in the future.

Photoacoustic and fluorescent effects in multilayer plasmon-dye interfaces

Progress in understanding the cell biology and diseases depends on advanced imaging and labeling techniques. Here, we address this demand by exploring novel multilayered nanocomposites (MNCs) with plasmonic nanoparticles and absorbing dyes in thin nonabsorbing shells as supercontrast multimodal photoacoustic (PA) and fluorescent agents in the near-infrared range. The proof of concept was performed with gold nanorods (GNRs) and indocyanine green (ICG) dispersed in a matrix of biodegradable polymers. We demonstrated synergetic PA effects in MNCs with the gold-ICG interface that could not be achieved with ICG and GNRs alone. We also observed ultrasharp PA and emission peaks that could be associated with nonlinear PA and spaser effects, respectively. Low-toxicity multimodal MNCs with unique plasmonic, thermal and acoustic properties have the potential to make a breakthrough in PA flow cytometry and near-infrared spasers in vivo by using the synergetic interaction of plasmonic modes with a nearby absorbing medium.

Novel polycaprolactone (PCL)-type I collagen core-shell electrospun nanofibers for wound healing applications

Type I collagen (Col_1) is one of the main proteins present in the skin extracellular matrix, serving as support for skin regeneration and maturation in its granulation stage. Electrospun materials have been intensively studied as the next generation of skin wound dressing mainly due to their high surface area and fibrous porosity. However, the electrospinning of collagen-based solutions causes degradation of its structure. In this work, a coaxial electrospinning process was proposed to overcome this limitation. The production of mats of polycaprolactone (PCL)-Col_1/PVA (collagen/poly(vinyl alcohol)) composed of core-shell nanofibers was investigated. PCL solution was used as the core solution, while Col_1/PVA was used as the shell solution. PVA was used to improve the processability of collagen, while PCL was employed to improve the mechanical properties and morphology of Col_1/PVA fibers. The morphology and the cytotoxicity of the fibers were highly dependent on the processing parameters. Defect-free core-shell nanofibers were obtained with a shell/core flow rates ratio = 4, flight distance of 12 cm, and an applied voltage of 16 kV. Using this strategy, the triple helix structure characteristic of the collagen molecule was preserved. Moreover, the common post-processing of solvent removal could be suppressed, simplifying the manufacturing processing of these biomaterials. The nanostructured mats showed no cytotoxicity, high liquid absorption, structural stability, hydrophilic character, and collagen release capacity, making them a potential novel dressing for skin damage regeneration, in special in the case of chronic wounds treatment, in which exogenous collagen delivery is necessary.

A Regenerative Polymer Blend Composed of Glycylglycine ethyl ester-substituted Polyphosphazene and Poly (lactic-co-glycolic acid)

In the pursuit of continuous improvement in the area of biomaterial design, blends of mixed-substituent polyphosphazenes and poly (lactic acid-glycolic acid) (PLGA) were prepared, and their morphology of phase distributions for the first time was studied. The degradation mechanism and osteocompatibility of the blends were also evaluated for their use as regenerative materials. Poly [(ethyl phenylalanato)25(glycine ethyl glycinato)75phosphazene](PNEPAGEG) and poly [(glycine ethyl glycinato)75(phenylphenoxy)25phosphazene](PNGEGPhPh) were blended with PLGA at various weight ratios to yield different blends, namely PNEPAGEG-PLGA 25:75, PNEPAGEG-PLGA 50:50, PNGEGPhPh-PLGA 25:75, and PNGEGPhPh-PLGA 50:50. The molecular interactions, domain sizes, and phase distributions of the blends were confirmed by atomic force microscopy (AFM) as the PNEPAGEG-PLGA and PNGEGPhPh-PLGA blends showed different domain sizes and phase distributions. Due to the extensive hydrogen bonding within the two polymer components, PNEPAGEG-PLGA exhibited small-sized domains and well-distributed morphology. While for the PNGEGPhPh-PLGA blends, the presence of phenylphenol (PhPh) caused the formation of PLGA large-sized domains as the PLGA formed a continuous phase and PNGEGPhPh constituted a dispersed phase. In addition to AFM results, scanning electron microscopy-energy dispersive X-ray spectrometry (SEM-EDS), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and Fourier transform infrared spectroscopy (FTIR) results demonstrated the miscibility of the blends. The PNEPAGEG-PLGA and PNGEGPhPh-PLGA blends presented in situ 3D interconnected porous structures upon degradation in phosphate-buffered saline (PBS) media at 37°C. However, the blends showed different mechanistic pathways to the formations of the pores. The difference in the erosion patterns could be attributed to the nature of molecular attractions that exist in the blends. Furthermore, the novel blends were able to support cell growth as compared to PLGA, and accommodate cell infiltrations, which ultimately augmented surface area for better cell-material interactions.

Prospects of Using Biocatalysis for the Synthesis and Modification of Polymers

Trends in the dynamically developing application of biocatalysis for the synthesis and modification of polymers over the past 5 years are considered, with an emphasis on the production of biodegradable, biocompatible and functional polymeric materials oriented to medical applications. The possibilities of using enzymes not only as catalysts for polymerization but also for the preparation of monomers for polymerization or oligomers for block copolymerization are considered. Special attention is paid to the prospects and existing limitations of biocatalytic production of new synthetic biopolymers based on natural compounds and monomers from biomass, which can lead to a huge variety of functional biomaterials. The existing experience and perspectives for the integration of bio- and chemocatalysis in this area are discussed.

A Novel Delivery System for the Controlled Release~of Antimicrobial Peptides: Citropin 1.1 and Temporin A

Antimicrobial peptides (AMPs) are prospective therapeutic options for treating multiple-strain infections. However, clinical and commercial development of AMPs has some limitations due to their limited stability, low bioavailability, and potential hemotoxicity. The purpose of this study was to develop new polymeric carriers as highly controlled release devices for amphibian peptides citropin 1.1 (CIT) and temporin A (TEMP). The release rate of the active pharmaceutical ingredients (APIs) was strongly dependent on the API characteristics and the matrix microstructure. In the current work, we investigated the effect of the polymer microstructure on in vitro release kinetics of AMPs. Non-contact laser profilometry, scanning electron microscopy (SEM), and differential scanning calorimetry (DSC) were used to determine the structural changes during matrix degradation. Moreover, geno- and cytotoxicity of the synthesized new carriers were evaluated. The in vitro release study of AMPs from the obtained non-toxic matrices shows that peptides were released with near-zero-order kinetics. The peptide “burst release” effect was not observed. New devices have reached the therapeutic concentration of AMPs within 24 h and maintained it for 28 days. Hence, our results suggest that these polymeric devices could be potentially used as therapeutic options for the treatment of local infections.

Fibrous Materials Made of Poly(ε-caprolactone)/Poly(ethylene oxide)-b-Poly(ε-caprolactone) Blends Support Neural Stem Cells Differentiation

In this work, we design and produce micron-sized fiber mats by blending poly(ε-caprolactone) (PCL) with small amounts of block copolymers poly(ethylene oxide)_m-block-poly(ε-caprolactone)_n (PEO_m-b-PCL_n) using electrospinning. Three different PEO_m-b-PCL_n block copolymers, with different molecular weights of PEO and PCL, were synthesized by ring opening polymerization of ε-caprolactone using PEO as initiator and stannous octoate as catalyst. The polymer blends were prepared by homogenous solvent mixing using dichloromethane for further electrospinning procedures. After electrospinning, it was found that the addition to PCL of the different block copolymers produced micron-fibers with smaller width, equal or higher hydrophilicity, lower Young modulus, and rougher surfaces, as compared with micron-fibers obtained only with PCL. Neural stem progenitor cells (NSPC), isolated from rat brains and grown as neurospheres, were cultured on the fibrous materials. Immunofluorescence assays showed that the NSPC are able to survive and even differentiate into astrocytes and neurons on the synthetic fibrous materials without any growth factor and using the fibers as guidance. Disassembling of the cells from the NSPC and acquisition of cell specific molecular markers and morphology progressed faster in the presence of the block copolymers, which suggests the role of the hydrophilic character and porous topology of the fiber mats.

In Vivo Evaluation of the Regenerative Capability of Glycylglycine Ethyl Ester-Substituted Polyphosphazene and Poly(lactic-co-glycolic acid) Blends: A Rabbit Critical-Sized Bone Defect Model

In an effort to understand the biological capability of polyphosphazene-based polymers, three-dimensional biomimetic bone scaffolds were fabricated using the blends of poly[(glycine ethylglycinato)75(phenylphenoxy)25]phosphazene (PNGEGPhPh) and poly(lactic-co-glycolic acid) (PLGA), and an in vivo evaluation was performed in a rabbit critical-sized bone defect model. The matrices constructed from PNGEGPhPh-PLGA blends were surgically implanted into 15 mm critical-sized radial defects of the rabbits as structural templates for bone tissue regeneration. PLGA, which is the most commonly used synthetic bone graft substitute, was used as a control in this study. Radiological and histological analyses demonstrated that PNGEGPhPh-PLGA blends exhibited favorable in vivo biocompatibility and osteoconductivity, as the newly designed matrices allowed new bone formation to occur without adverse immunoreactions. The X-ray images of the blends showed higher levels of radiodensity than that of the pristine PLGA, indicating higher rates of new bone formation and regeneration. Micro-computed tomography quantification revealed that new bone volume fractions were significantly higher for the PNGEGPhPh-PLGA blends than for the PLGA controls after 4 weeks. The new bone volume increased linearly with increasing time points, with the new tissues observed throughout the defect area for the blend and only at the implant site's extremes for the PLGA control. Histologically, the polyphosphazene system appeared to show tissue responses and bone ingrowths superior to PLGA. By the end of the study, the defects with PNGEGPhPh-PLGA scaffolds exhibited evidence of effective bone tissue ingrowth and minimal inflammatory responses. Thus, polyphosphazene-containing biomaterials have excellent translational potential for use in bone regenerative engineering applications.

Gaining Structural Control by Modification of Polymerization Rate in Ring-Opening Polymerization-Induced Crystallization-Driven Self-Assembly

Polymerization-induced self-assembly (PISA) has become an important one pot method for the preparation of well-defined block copolymer nanoparticles. In PISA, morphology is typically controlled by changing molecular architecture and polymer concentration. However, several computational and experimental studies have suggested that changes in polymerization rate can lead to morphological differences. Here, we demonstrate that catalyst selection can be used to control morphology independent of polymer structure and concentration in ring-opening polymerization-induced crystallization-driven self-assembly (ROPI-CDSA). Slower rates of polymerization give rise to slower rates of self-assembly, resulting in denser lamellae and more 3D structures when compared to faster rates of polymerization. Our explanation for this is that the fast samples transiently exist in a nonequilibrium state as self-assembly starts at a higher solvophobic block length when compared to the slow polymerization. We expect that subsequent examples of rate variation in PISA will allow for greater control over morphological outcome.

Biocompatible Polymers for the Synthesis of Nanosalts via Supramolecular Ion-Dipole Interaction

High salt (NaCl) consumption is critical for many healthy problems, e.g., high blood pressure, heart attack, and stroke. Nanosized NaCl particles hold great promise for reducing salt intake; however, they suffered from deliquescence due to their large surface area. We report a facile yet general strategy for the preparation of NaCl nanoparticles (nanosalts) with controllable sizes and moisture resistance property by using biocompatible polymers, such as polyethylene glycol, polyvinylpyrrolidone, polypropylene glycol, polylactic acid, polycaprolactone, and copoly(oxyethylene/oxypropylene/oxyethylene) via supramolecular ion-dipole interaction. The size can be tuned in a range of 100-160 nm by changing the molecular weight or concentration of polymer ligands. Nanosalts protected by polymers showed faster dissolution rate and better moisture resistance compared with microsized NaCl particles without polymer ligands. This work promotes the future development of nanosalts for food and industrial applications to improve human health.

Collagen-Based Dissolving Microneedles with Flexible Pedestals: A Transdermal Delivery System for Both Anti-Aging and Skin Diseases

Biocompatible polymer microneedles (MNs) are emerging as a promising platform for transdermal drug delivery, especially for facial treatments. Therefore, an MN patch in this study uses hydrolyzed collagen (HC) contained in skin cells as the main raw material and adopts a two-step cast method to develop a rapidly dissolving microneedle (DMN) to deliver collagen in a simple and minimally invasive way, allowing the release of the encapsulated drug in the skin. By optimizing the formulation and proportion of HC and auxiliary support materials, the mechanical strength required to pierce the skin is obtained, while the soft pedestal allows for flexibility in application. The DMNs can dissolve completely in the skin within 15 min and release within ≈ 8 h, and do not cause toxicity or irritation when being applied. In contrast to the ineffectiveness of oral and external application, and the high risk of dermal injection, drug-loaded DMNs overcome the drawbacks of traditional methods with direct penetration and minimally invasive manner, enabling efficient and safe treatment. The successful preparation and research of HC DMNs have innovative and practical significance in this field, and it is expected to become a simple, effective, and popular transdermal drug delivery platform for cosmetics.

Enhanced Synaptic Properties in Biocompatible Casein Electrolyte via Microwave-Assisted Efficient Solution Synthesis

In this study, we fabricated an electric double-layer transistor (EDLT), a synaptic device, by preparing a casein biopolymer electrolyte solution using an efficient microwave-assisted synthesis to replace the conventional heating (heat stirrer) synthesis. Microwave irradiation (MWI) is more efficient in transferring energy to materials than heat stirrer, which significantly reduces the preparation time for casein electrolytes. The capacitance-frequency characteristics of metal-insulator-metal configurations applying the casein electrolyte prepared through MWI or a heat stirrer were measured. The capacitance of the MWI synthetic casein was 3.58 μF/cm² at 1 Hz, which was higher than that of the heat stirrer (1.78 μF/cm²), confirming a stronger EDL gating effect. Electrolyte-gated EDLTs using two different casein electrolytes as gate-insulating films were fabricated. The MWI synthetic casein exhibited superior EDLT electrical characteristics compared to the heat stirrer. Meanwhile, essential synaptic functions, including excitatory post-synaptic current, paired-pulse facilitation, signal filtering, and potentiation/depression, were successfully demonstrated in both EDLTs. However, MWI synthetic casein electrolyte-gated EDLT showed higher synaptic facilitation than the heat stirrer. Furthermore, we performed an MNIST handwritten-digit-recognition task using a multilayer artificial neural network and MWI synthetic casein EDLT achieved a higher recognition rate of 91.24%. The results suggest that microwave-assisted casein solution synthesis is an effective method for realizing biocompatible neuromorphic systems.