Tongue training technique for guiding the mandible in establishing horizontal jaw relation in edentulous patients

BACKGROUND

Edentulous patients have poor neuromuscular proprioception to guide the mandible to the desirable horizontal relation. Horizontal jaw relation is a complex relationship in which variation may occur in vertical, anteroposterior and mediolateral directions.

OBJECTIVE

The aim of this study was to train the tongue and bring the mandible to centric relation in geriatric edentulous cases.

MATERIALS AND METHODS

Protrude the tongue to the maximum length and retract back to centric relation, move the tongue on the left side beyond the angle of the mouth and bringing back to centric relation, move the tongue on the right and left side beyond the angle of the mouth and bringing back to centric relation, then the tongue should move upwards and touches the marginal tubercle of upper lip and bringing back to centric relation and move the tongue upward and posteriorly to touch the posterior part of the hard palate of the maxilla and swallowing.

RESULTS

Edentulous patient can successfully move the mandible in centric relation after training the tongue.

CONCLUSION

The present technique is useful for establishment of horizontal jaw relation in edentulous cases using tongue training exercise in Prosthodontic dentistry.

Centric relation-A biological perspective of a technical concept

BACKGROUND

Few terms and concepts have been so extensively debated in dentistry as the words 'centric relation' (CR). Debates involve its biological, diagnostic and therapeutic usefulness.

METHODS

A review of the literature on the current concepts on CR as a diagnostic or therapeutic aid in dentistry was provided. Clinical trials assessing the superiority of one CR recording method over the others to identify patients with temporomandibular disorders (diagnostic use) or to manage patients with prosthodontic or orthodontic needs (therapeutic use) were tentatively included.

RESULTS

Due to the absence of literature addressing either of the above targets, a comprehensive overview was provided. The diagnostic use of CR as a reference position to identify the correct position of the temporomandibular joint condyle within the glenoid fossa is not supported and lacks anatomical support. From a therapeutic standpoint, the use of CR can be pragmatically useful in prosthodontics as a maxillo-mandibular reference position when occlusal re-organization is warranted and/or when the position of maximum intercuspation is no longer available.

CONCLUSIONS

The derived occlusal goals from a diagnostic misuse of CR are generally the result of circular reasoning, that is a technique is based on the recording of a certain condylar position that is believed to be 'ideal' and the treatment is considered successful when such position is shown by the specific instrument that was manufactured for that purpose. The term 'Centric Relation' might be replaced with the term 'Maxillo-Mandibular Utility Position'.

A fully digital workflow to register maxillomandibular relation using a jaw motion tracer for fixed prosthetic rehabilitation: A technical report

OBJECTIVE

This technique aimed to describe a fully digital workflow to register maxillomandibular relation for fixed prosthetic rehabilitation.

CLINICAL CONSIDERATIONS

Mandibular kinematics could be reproduced in a four-dimensional (4D) virtual patient based on the intraoral scan, facial scan, cone beam computed tomography, and jaw motion trajectory, which helped record centric relation and determine a proper occlusal vertical dimension in a virtual environment. The therapeutic position could be exported directly to the dental computer-aided design software for digital waxing design with a facial scan. The 4D virtual patient was also used to verify the functional and esthetic outcomes of provisional restorations.

CONCLUSIONS

This novel approach digitized the process of determination, delivery, and double-check of maxillomandibular relation, thus contributing to the establishment of a completely digital workflow for fixed prosthetic rehabilitation.

CLINICAL SIGNIFICANCE

Registration of maxillomandibular relation, including centric relation and occlusal vertical dimension is critical to the success of prosthetic rehabilitation. Traditional procedures are complex and time-consuming, and heavily rely on the clinical experience of dentists. A fully digital approach to creating a 4D virtual patient and registering the maxillomandibular relation is established, which guides to determine a proper occlusal vertical dimension in centric relation. Digital delivery and double-check can simplify the conventional procedure and ensure that the determined maxillomandibular relation is reliable.

Digital Workflow in Oral Splint Manufacturing

AIM

The digital workflow used to manufacture an adjusted oral splint will be demonstrated in a patient case.

MATERIALS AND METHODS

A 25-year-old female patient presented for management of her bruxism. Therefore, an adjusted oral splint was manufactured. A computer-aided motion analysis of the patient was conducted (JMA Optic, Amann Girrbach) and full-arch scans of the maxilla and mandible, a biocopy of the maxilla with bite fork as well as buccal scans of the centric jaw relation (Primescan, Dentsply Sirona). The jaw relation was determined beforehand by ballistic closing on a chairside fabricated anterior jig. The digital construction of a Michigan splint took place in the laboratory. The design was nested and milled from a polymethyl methacrylate (PMMA)-containing blank (CLEARsplint Disc, Astron Dental Corporation).

RESULT

The oral splint was inserted into the patient's mouth and checked to ensure a tensionfree fit. The static and dynamic contact relationship was checked. During the follow-up visit, the patient reported an improvement in tension in the masticatory muscles.

CONCLUSION

The procedure described allows for an adjusted oral splint to be manufactured in a purely digital workflow.

Maxillary occlusal device designed with an anterior platform for guiding the occlusal adjustments during the delivery appointment: A dental protocol

OBJECTIVE

To describe a technique for fabricating an additively manufactured maxillary occlusal device using a complete digital workflow.

CLINICAL CONSIDERATIONS

The maxillary occlusal device design may include an anterior platform to guide the positioning of the mandible in a reproducible position for facilitating the delivery procedure.

CONCLUSIONS

The described technique provides a more efficient and less time-consuming method for designing an manufacturing a printed occlusal device, when compared with conventional fabrication techniques.

CLINICAL SIGNIFICANCE

The additively manufactured occlusal device designed with an anterior platform guides the positioning of the mandible in a reproducible position, facilitates the delivery procedures, and produces a more efficient and less time-consuming method when compared with conventional methods.

The Role of Maxillofacial Structure and Malocclusion on Condylar Displacement in Maximum Intercuspation and Centric Relation in Patients Seeking Orthodontic Treatment-A Scoping Review

BACKGROUND

Available knowledge about malocclusion and cephalometric variables and their connection with an increased risk of condylar displacement (CD) is scarce. This article aims to present current information on the relationship between centric relation-maximum intercuspal position discrepancies and maxillofacial morphology and malocclusion in patients seeking orthodontic treatment as well as to identify those who require expanded diagnostic evaluation for this disorder.

METHODS

This review analyzed the PubMed, Cochrane Library, Web of Science, and Scopus electronic databases up to February 2022. Keywords and additional manual searches were performed. Literature selection was based the PRISMA-ScR checklist. The JBI Critical Appraisal Tool assessed the methodological quality of included studies.

RESULTS

The databases search provided 2321 studies. A total of 10 studies were included in this review after eligibility criteria and JBI assessment. This review was separated into five parts that evaluated CD correlations depending on the following: maxillofacial structure in different vertical and sagittal skeletal patterns, vertical, horizontal, and transverse malocclusions.

CONCLUSIONS

A hyperdivergent facial skeletal structure is a risk factor for increased CD, particularly in the vertical dimension. The condylar processes are usually displaced in a posteroinferior direction. Further studies are warranted to elucidate the relationship among remaining skeletal and dental malocclusions and the occurrence of CD.

Clinical reproducibility of different centric relation recording techniques in edentulous individuals: An observational cross-sectional study

PURPOSE

To assess the reproducibility of four different centric relation (CR) recording techniques, and time spent performing each technique in edentulous individuals.

MATERIALS AND METHODS

Four techniques were assessed: extraoral gothic arch (EOGA) tracing, intraoral gothic arch (IOGA) tracing, deglutition (D), and frontal manipulation with tongue elevation (FMTE). Twelve subjects participated in the study; four technique records were performed on each volunteer by the same operator. Each record was repeated three times, in the same period of the day, with a 30 min interval between each technique. The reproducibility of each technique was assessed by the tri-dimensional displacement of the position of the condylar housing (mandible condyle) to the wall of the condylar guide (glenoid cavity) in the semi-adjustable articulator (anteroposterior, mediolateral, and superior-inferior). The time spent on each technique was timed in seconds (from the beginning of each technique until the wax occlusion fixation). The analysis of variance (ANOVA) and the Tukey test were performed for anteroposterior displacement (two-way) and for time spent on CT recording techniques (one-way) (α < 0.05). Regarding mediolateral and superior-inferior displacements, the nonparametric Kruskal-Wallis was performed for the comparison between recording methods, whereas the Mann-Whitney test was performed for the comparison between sides (α < 0.05).

RESULTS

The factor recording technique interfered with the anteroposterior displacement (ANOVA: α < 0.001; F = 11.396). The technique D (right side: 3.78 ± 0.69 mm; left side: 3.45 ± 0.74 mm) showed a statistically significant difference compared to the other techniques (EOGA: right side: 3.00 ± 0.00 mm; left side: 3.00 ± 0.00 mm; FMTE: right side: 2.81 ± 0.52 mm; left side: 2.82 ± 0.79 mm; IOGA: right side: 2.90 ± 0.65 mm; left side: 3.12 ± 0.44 mm). The time spent on the recording technique influenced the results (ANOVA: α < 0.001; F = 21.118). The IOGA (340.40 ± 163.41 s) and EOGA (285.93 ± 133.84 s) required more time compared to the D (86.00 ± 34.33 s) and FMTE (101.33 ± 36.72 s) techniques.

CONCLUSION

Graphic recordings showed better reproducibility and accuracy of the position of the centric relation.

Clinical Influence of Mandibular Flexure on Oral Rehabilitation: Narrative Review

AIM

The current paper aims to review mandibular flexure and its clinical implications in the field of oral rehabilitation. Mandibular flexure is a deformity of the mandible, which occurs during jaw movements.

METHODS AND MATERIALS

An electronic database search was conducted using the PRISM model, with a total of 49 articles included.

RESULTS

Mandibular flexure affects various stages of oral rehabilitation treatments. Effects of mandibular flexure are more significant in periodontal patients, and in implant-supported restorations, compared to natural teeth, due to differences in the force absorption by the periodontal ligament. Various adjustments must be made to the prosthodontic framework to enable long-term survival of the restorative treatments.

CONCLUSIONS

Dental practitioners should pay attention to the following: (1) digital impressions are preferred over conventional; (2) mouth opening should be kept to a minimum (as possible, up to 10-20 mm) while also avoiding any anterior movements of the mandible (protrusion); (3) the number of abutment teeth should be kept to a minimum; (4) structures in the lower jaw should be splitted; (5) non-rigid connectors should be used to reduce the effort exerted; (6) in periodontal patients, the preference is for short-span restorations and non-rigid connectors; (7) in implant-supported restorations, it is preferable to divide the framework into two or three segments, utilizing rigid materials with a low elastic modulus. There is no agreement in the literature about the preferred location of the implants in the jaw.

Dimensions of Hybrid and Nanohybrid Mouthguards for Mixed Martial Arts Fighters-Evaluation of a New Method of Fabrication

Ethylene vinyl acetate mouthguards are the most often used custom protective intraoral appliances by combat sports practitioners. However, due to the difficulties in maintaining the hygiene of such mouthguards and thinning during fabrication, resulting in difficulty in predicting final dimensions, they may not be the optimal solution. The aim of this research was to evaluate an innovative method of mouthguard formation using intraoral modeling of the mouthguard pattern, hybrid acrylic material, and the addition of ZnO nanoparticles. Seventeen mouthguards patterns and 34 custom mouthguards were evaluated: 17 hybrid and 17 nanohybrid. A total of 1122 measurements were performed: each mouthguard and pattern was measured at 22 points. Statistical analyses were performed with the use of IBM^® SPSS^® Statistics 27.0.0 software (IBM, Armonk, NY USA). The mean thickness of the patterns and mouthguards at all labial areas of central incisors were between 4.65 and 4.80 mm. The thickness at the buccal surface of the first molar was between 3.71 and 4 mm, and at the occlusal surface between 3.40 and 3.56 mm in the cusp area. All measurements of hybrid and nanohybrid mouthguards were strongly and highly correlated with the measurements of the mouthguard patterns. Hybrid and nanohybrid mouthguards are an advantageous alternative to thermoformed custom appliances.

One-Stage Virtual Plan of a Complex Orthodontic/Prosthetic Dental Rehabilitation

In complex dental treatments, a preliminary virtual plan (VP) can minimise the probability of errors and increase the predictability of the achieved result. Digital technologies and artificial intelligence open more opportunities for such planning, as they can be applied at the early stages of clinical examination to develop a simultaneous VP of all stages of treatment. The present clinical case describes a one-stage entire VP combining all the stages of treatment: gnathological, orthodontic, and prosthetic rehabilitation, until the final result. This approach avoids the accumulation errors associated with multistage VP, in which one stage of planning follows the end of a previous stage. One-step VP also allows demonstrating to the patients the expected results of the restoration, which increases their motivation to initiate the treatment.

[Virtual positioning of the mandible to the position of the central relationship in a clinical example]

On the example of a clinical case of functional TMJ disorders associated with loss of bite height, an algorithm for virtual determination of the Central relation position of the jaws based on the controlled width of the articular gap and the height of the bite is described. The subsequent 3D design and application of the repositional splint showed the reality of achieving the pre-planned position and the possibility of implementing the proposed approach in clinical practice.

Centric relation critically revisited-What are the clinical implications?

PURPOSE OF THE ARTICLE

Centric relation is a dental term that has undergone many alterations over the years, which in turn have led to significant clinical controversies. These continuing changes in the meaning of the term CR have not only led to confusion, but they also have resulted in a variety of unnecessary diagnostic and therapeutic procedures. Analysis of the dental literature reveals ongoing misunderstanding and disagreement regarding that term among both clinicians and academic dentists.

MATERIALS AND METHODS

A search of the PubMed database was performed with the following search terms: "centric relation", "masticatory muscles", "maxillomandibular relationship" and "condylar position." Relevant literature from the past 70 years until the present day was meticulously scrutinised.

RESULTS

As expected, the literature review on the topic of CR revealed a problematic pattern of changing definitions and clinical disagreements, all of which have had a significant impact on the practice of dentistry.

CONCLUSION

There are semantic, conceptual and practical reasons for concluding that the term 'centric relation' is flawed. Those flaws have a significant impact on dental practice. Based on our analysis, argumentation is provided to conclude that the term 'centric relation' should be abandoned. Instead, it appears that every individual has a unique temporomandibular joint relationship which cannot be described by any singular term. In healthy dentate patients, this relationship is determined by the maximum intercuspation of the teeth and should therefore be considered as biologically acceptable.

Centric relation registration with intraoral central bearing on curved vs. flat plates with rim trays in edentulous patients

The aim of this study was to compare jaw relation record in the completely edentulous patient using acrylic rim trays with curved or flat registration plates or using the manual guidance technique. The study included 17 patients - 11 female and 6 male, average age 70 years. Three jaw relation records were taken during one session, in the same vertical dimension, using acrylic rim trays: (1) with manual guidance (IM), (2) with self-guided recording system with acrylic rim tray and central support using a curved plate (BYC) and (3) with self-guided recording system with acrylic rim tray and central support using a flat plate (BYR). The models were mounted on a Whip Mix 2240 articulator to which a condyle position device (Orthodent) was added to register, at the level of the condyle box and incisal table, the differences among the positions recorded with the different setups (IM, BYC and BYR). The distances were measured on millimeter paper provided by the recording system manufacturer. For statistical analysis, confidence intervals (95%) were calculated for the mean differences and Student's t-test for paired data (significance level: alpha<0.05). On both the mesiodistal plane and the vertical plane at the level of each condyle box and the incisal table, there were statistically significant differences among the three systems (p<0.001). At the level of incisal table, BYC and BYR provided more retrusive records than IM [arithmetic means (standard deviations) in millimeters: 3.82 (2.10) and 4.53 (2.18), respectively). The records obtained with BYR were significantly more retrusive with BYC [arithmetic mean (standard deviation) in millimeters: 1.41 (1.00)]. We reject the null hypothesis that proposes that all three registration systems described are clinically equivalent for establishing a jaw relation record in completely edentulous patients.

The Relationship Between Centric Occlusion and The Maximal Intercuspal Position and Their Use as Treatment Positions for Complete Mouth Rehabilitation: Best Evidence Consensus Statement

PURPOSE

The purpose of this Best Evidence Consensus Statement was to evaluate the existing literature relative to two focus questions: How often does centric occlusion coincide with maximal intercuspal position in dentate and partially dentate populations?; and should centric occlusion or maximal intercuspal positions be equivalent for dentate and partially dentate patients undergoing complete mouth rehabilitation?

MATERIALS AND METHODS

Keywords used in the initial search were: intercuspal position, centric occlusion, centric relation, maximal intercuspal position, prosthodontic rehabilitation, and occlusion. The search was then limited to Systematic Reviews, Randomized Controlled Studies, Meta-analyses and Clinical Trials.

RESULTS

The initial search strategy related to the selected search terms resulted in more than 15,000 articles. When the subsequent search was limited to Systematic Reviews, Randomized Controlled Studies, and Meta-Analysis and Clinical Trials, 313 articles were selected for further analysis.

CONCLUSIONS

Review of the literature reveals that most dentate and partially dentate patients do not have coincident centric occlusion and maximal intercuspal position. There is support for coincidence between centric occlusion and maximal intercuspal position as the preferred occlusal relationship in complete mouth rehabilitations. The literature does not report conclusive evidence of adverse prosthodontic outcomes with complete rehabilitations in centric occlusion or maximal intercuspal position in a healthy population. However, there is support for an association between centric occlusion-maximal intercuspal position discrepancies and occlusal instability as well as temporomandibular joint disorders. Hence, it is concluded that partially and completely dentate patients requiring complete mouth rehabilitation should be restored in centric occlusion.

Angle's Classification-A Prosthodontic Consideration: Best Evidence Consensus Statement

PURPOSE

This Best Evidence Consensus Statement evaluated the existing Angle's classification clinical literature to determine if the Angle's classification as historically determined in maximum intercuspal position (MIP) with hand held casts is coincident with the centric occlusion (CO) determined Angle's classification. In addition, it explored the value of using Angle's classification for edentulous patients MATERIALS AND METHODS: The search strategy was related to the focus questions and limited to Meta-analyses, Systematic Reviews (SR), Randomized Controlled Trials (RCT) and Clinical Trials. Searches were completed using the term Angle's classification and Boolean Modifiers (AND) with the key terms: dental occlusion, dental occlusion centric, centric occlusion, centric relation, maximal intercuspation, MIP, intercuspal position, and edentulous patient, retrognathia, determination, and prognathia. Additional related articles were culled from the reference lists in the articles found in the PubMed searches.

RESULTS

The search identified 494 articles related to the selected terminology. Titles were reviewed and selected if related to the focus questions for further review. Seven papers could be identified that addressed the specifics of the questions.

CONCLUSIONS

There is evidence that the Angle's classification for many patients will change when recorded in CO compared to the historical MIP determination/definition. A different Angle's classification recorded in CO is potentially a significant diagnostic finding for patients needing complete mouth rehabilitation. The current definitions of Angle's Classification are not useful in the management of edentulous patients.

The evolution of temporomandibular disorders: A shift from experience to evidence

After over 80 years of much obsession as well as avoidance of the subject of temporomandibular disorders (TMDs), the dental profession is still divided over what they are and how to deal with them. Over this period, nearly every discipline in dentistry has played some role in the development of this field. Unfortunately, a significant amount of this information has been based on personal opinion, experience-based philosophies, or poorly conducted research. Furthermore, each dental specialty has been responsible for contributing to the concepts of the etiology and management of TMDs with their own professional bias; for example, orthodontists describe these problems in orthodontic terms and offer orthodontic treatments or solutions for their patients. As various treatment approaches were found to be effective at least some of the time, this has further led to misinformation and confusion within the profession. Advances in research from diverse fields, including neurophysiology, pain pathophysiology, genetics, endocrinology, behavioral sciences, and psychology, have significantly altered our understanding of TMDs and how they should be managed. The rigid mechanical and dental-based model of the past has been gradually replaced by a biopsychosocial medical model for the diagnosis and treatment of TMDs as well as other acute and chronic pain disorders. This paper discusses the evolution of our understanding of TMDs since they were first described 85 years ago. Contemporary scientific findings and their implications are presented in some detail for clinicians who wish to provide the appropriate management for their orofacial pain patients.

A new approach in three dimensions to define pre- and intraoperative condyle-fossa relationships in orthognathic surgery - is there an effect of general anaesthesia on condylar position?

Incorrect registration of the condylar position in orthognathic surgery is supposed to cause postoperative relapse, condylar resorption and temporomandibular disorders. The aim of this prospective study was to evaluate the influence of general anaesthesia on centric relation (CR). Therefore, CR registered preoperatively in the awake patient and CR registered intraoperatively under general anaesthesia were recorded in 30 patients (14 men, 16 women) undergoing orthognathic surgery (skeletal class I: n=3, II: n=13, III: n=14; symmetric: n=20; asymmetric: n=10). CR records were digitized and, through superimposition on the preoperative cone beam computed tomography of the patient's skull, the superior, anterior and posterior joint space and the volumetric congruence of 120 condyles were analysed. The linear measurements of joint spaces did not demonstrate any clinically relevant discrepancy between the CR measured in the awake and anaesthetized patient. In contrast, volumetric analysis revealed statistically significant differences between both states, with an intraoperative condylar sag predominantly in the posterior-inferior direction. The patient's skeletal class or symmetry had no significant influence on the intraoperative condylar displacement. Thus, the risk of fixing the condyle in an unphysiological position supports the idea of using intraoperative condylar positioning devices to achieve predictable and stable outcomes.

Comparative Analysis of the Reproduction Accuracy of Main Methods for Finding the Mandible Position in the Centric Relation Using Digital Research Method. Comparison between Analog-to-Digital and Digital Methods: A Preliminary Report

Purpose: To compare the aspect of the reproduction accuracy in studied methods of determination of the (CR) of jaws using the digital research methods. The methods used were bilateral manipulation by P.E. Dawson, frontal deprogrammer, leaf gauge, and intraoral device for recording of Gothic arch angle. Methods: To determine the reproduction accuracy of the centric relation of jaws, we examined 5 patients with intact dentition in a prosthetic dentistry clinic (first class in Angle’s system). For each method, 20 registrations of the centric jaw relation were carried out by one operator. The breaks between definitions were 30 minutes. A total of 400 CR recording operations were carried out (400 records of CR). In order to study the reproducibility of CR determination methods, 200 recorded mandible positions were analyzed by means of an analog-to-digital method (a macro kit Canon 650D, Canon 60 mm macro IS USM f2.8, Canon macro ring MR-14 EX and the computer program Adobe Photoshop) to assess the first occlusal contact obtained in the CR of jaws, while the other 200 were analyzed by means of a digital method (the computer program Avantis for 3D modeling, Prime as a laboratory 3D scanner (DOF), and Trios as an intraoral scanner (3Shape)) to assess the spatial position of the mandible in the CR. Statistical analysis was carried out using STATISTICA-10. In all statistical analysis procedures, the critical significance level p was assumed to be 0.05. Results: In the study of the data by means of the computer program Avanti 3D, the reproducibility of the mandible position in the CR reached 0.119 ± 0.012 mm for frontal deprogrammer, 0.225 ± 0.028, p ≤ 0.05 for bilateral manipulation by Dawson P.E., 0.207 ± 0.02, p ≤ 0.05 for leaf gauge, and 0.120 ± 0,013, p ≤ 0.05 using an intraoral device for recording the Gothic arch angle. The analog-to-digital method showed an identical tendency for reproduction of the mandible position. Conclusions: The digital analysis we made using the Avantis 3D program showed, with high confidence, that the maximum reproducibility of the CR position was reached by using our own design frontal deprogrammer and the device for recording Gothic arch angle.

A clinical comparative study to assess the efficacy of a new centric registration technique with a conventional technique

Aim:

The aim and objectives of this study were to assess and compare the efficacy of a new copyrighted technique (wax ball technique, L-77997/2018) and design (denture base design for the wax ball technique, L-78006/2018) for recording centric relation (CR).

Settings and Designs:

In vivo – comparative study.

Materials and Methods:

This study was conducted on sixty consented edentulous patients. The study participants were divided into Group I and Group II. CR in Group I patients was recorded using Dawson's bimanual technique (technique 1). For participants in Group II, CR was recorded using the authors’ copyrighted technique (technique 2). Time taken and accuracy of CR records by both the techniques were evaluated.

Statistical Analysis Used:

Descriptive statistics such as frequency and percentage were calculated for categorical variables, mean and standard deviation were calculated for quantitative variables. Independent t-test was used to compare the time taken to record the CR between the two groups. The accuracy of both the techniques was assessed by Mann–Whitney U-test.

Results:

The mean time taken for technique 1 was 56.47 s, whereas for technique 2, it was 5.97 s, with an overall mean difference of 50.5 s between the two techniques. Both techniques were found to be accurate, as the CR recorded during jaw relation matched with CR during trial in all the cases in both the groups (frequency 30 (N) and cumulative percentage 100%).

Conclusion:

From the study, it was found that, time taken for technique 2 was statistically less compared to that of technique 1, and both the techniques were found to be equally accurate.

[Research progress on the relationship between centric relation and orthodontic treatment]

Centric relation (CR) is one of the core research contents in orthodontics, prosthodontics, and gnathology, acting as an important physiological factor in reconstructing the occlusion and adjusting the occlusal relationship. For over a century, CR is still a controversial subject in dentistry. CR has been redefined for several times, and recently, its application has been widened in orthodontics, including orthodontic diagnosis, clinical examination and analysis, and treatment goals. The purpose of this article is to review the definition of CR, its relationship with malocclusion, and the application of this relationship in orthodontic treatment.

The Use of Mini-Plates for the Treatment of a High-Angle, Dual Bite, Class II Malocclusion

To present a case report of an orthodontic treatment of a high-angle, dual bite, Class II malocclusion without extractions and with the use of mini-plates. Class II malocclusion treatment protocols vary according to the morphological component of the malocclusion and the magnitude and direction of craniofacial growth. It is generally agreed that the cooperation of the patient and careful planning of anchorage are the key determinants of successful treatment. Protrusion of the upper and lower lip and a retrognathic mandible were the patient's chief concerns. The patient had learned to project her mandible forward to disguise the overjet. The patient's parents elected to correct the malocclusion with the use of bilateral infrazygomatic mini-plates. Pre-treatment condylar stabilization with an orthotic established a stable centric relation position, followed by mounting of the models on a semi-adjustable Panadent articulator. This allowed diagnosis and treatment planning from a stable condylar position and eliminated possible misdiagnosis due to the dual bite. Distal retraction and vertical control of the upper teeth enabled correction of the Class II malocclusion with minimal patient cooperation. Mini-plate-assisted treatment corrected the excessive overbite and overjet. The patient completed treatment with a stable occlusion and no longer postured her jaw forward. The parents and patient were completely satisfied with the positive treatment outcome. A 2-year follow-up confirmed the clinical stability.

Wearing complete dentures is associated with changes in the three-dimensional shape of the oropharynx in edentulous older people that affect swallowing

OBJECTIVE

To investigate the effects of wearing complete dentures on pharyngeal shape for swallowing in edentulous older people.

BACKGROUND

In the absence of complete dentures, edentulous older people often lose the occlusal support necessary to position the mandible, which leads to an anterosuperior shift of the mandible during swallowing. This may result in pharyngeal shape changes effecting swallowing function in older people. However, the details of this phenomenon are currently unclear.

MATERIALS AND METHODS

Participants were 17 older edentulous volunteers. Cone-beam computed tomography imaging was performed with the participant in the seated position and wearing (i) both maxillary and mandibular dentures, (ii) maxillary dentures only and (iii) no dentures. During imaging, participants were instructed to keep their mouth closed to the mandibular position determined in advance during swallowing for each denture-wearing condition. The volume, height and average cross-sectional area of the velopharynx and oropharynx were measured, and the positions of the epiglottis and mandible were recorded.

RESULTS

While the vertical height of the oral cavity and pharynx significantly decreased, the volume and average cross-sectional area of the oropharynx significantly increased when dentures were not worn (p < 0.01). The absence of dentures caused an anterosuperior shift of the mandible when swallowing and drew the epiglottis forward, resulting in expansion of the oropharynx where the tongue base forms the anterior wall.

CONCLUSION

The absence of dentures results in anatomical changes in oropharyngeal shape that may exacerbate the pharyngeal expansion caused by ageing and reduce the swallowing reserve.

Influence of the Hinge Axis Transfer Modality on the Three-Dimensional Condylar Shift Between the Centric Relation and the Maximum Intercuspation Positions

PURPOSE

The purpose of the study was to determine whether the hinge axis registration and the transfer modality (facebow transfer vs. average mounting) from the subject to the articulator affect the three-dimensional condylar shift between the centric relation (CR) and the maximum intercuspation (MI) position.

MATERIAL AND METHODS

The study was comprised of 32 fully dentate subjects (16 male and 16 female). Only the asymptomatic participants with normal occlusal relations (Angle class I) aged 20 - 33 (mean age 22.6 ± 4.7) met the inclusion criteria. Three-dimensional condylar shift (anteroposterior, superoinferior and mediolateral shift) between the centric relation position (CR) and the maximum intercuspation (MI) position was analyzed by means of Mandibular Position Indicator (SAM Prazisionstechnik GmbH, Muenchen, Germany).

RESULTS

The average three-dimensional condylar shift was 0.13 ± 0.12 mm for facebow transfer and 0.22 ± 0.23 mm for average mounting. There were no statistically significant differences noted between genders. The results of the Mann-Whitney test showed statistically significant differences for anteroposterior and superoinferior condylar shift (P < 0.001). However, the difference in the mediolateral shift was not statistically significant.

CONCLUSIONS

In order to find discrepancies within the three-dimensional condylar shift, facebow transfer proved to be more accurate than the average mounting in the semi-adjustable articulator. However, the average value of three-dimensional shifts of the condyle did not differ from normal values and they did not have clinical significance. Thus, both ways of transfer modalities (facebow transfer and average mounting) in asymptomatic subjects with normal occlusion can be considered reliable.

Effects of CO-CR discrepancy in daily orthodontic treatment planning

Background and aims

Nowadays centric relation is defined as a musculoskeletal stable position, with the condyles forward, as far upward as possible, centered transversely and with the articular disc properly interposed. On the other hand, centric occlusion or maximum intercuspidation is a dental determined position. The purpose of this pilot study is to evaluate the direction, frequency and magnitude of the discrepancy between centric occlusion and centric relation in all three axial directions, in a muscular non-deprogrammed population, before the beginning of orthodontic treatment.

Methods

The study group was represented by 40 symptomatic and asymptomatic patients seeking orthodontic treatment in a private dental office in Cluj-Napoca, Romania between 2014 and 2015. All patients had full records and articulator mounted models. All measurements were analyzed three-dimensionally.

Results

85% of the patients had vertical and 87.5% had horizontal CO-CR discrepancy for both condyles. 87.5% of the cases have had a significant condylar displacement in at least one of the three planes.

Conclusions

We should be aware of the dental occlusion determined by the dental contacts and the occlusion dictated by the musculoskeletal stable position of the condyles. The bigger the discrepancy between these two positions at the level of the condyles, the greater the chances to have either a patient who will develop a form of TMD before/during or after the orthodontic or prosthetic treatment, or a patient suffering already, but poorly diagnosed.

Gnathological splint therapy in temporomandibular joint disorder

Temporomandibular joint (TMJ) forms an integral functional part of stomatognathic system. Position, shape, structure and function of teeth have an influence on the proper functioning and health of TMJ. But a problem associated with TMJ is often neglected, and treatment for it is mostly restricted to palliative therapy. A proper understanding of the underlying cause of temporomandibular joint disorder (TMD) is necessary to device a proper treatment plan. Etiology of TMDs varies from idiopathic reasons to systemic disorders. The option of Gnathological splint is a conservative, safe and an effective mode of therapy for TMDs caused by occlusal discrepancies (fulcrum/interferences). This article presents a case report of a patient with TMD caused by occlusal discrepancy

Dental, skeletal asymmetries and functional characteristics in Class II subdivision malocclusions

Treatment outcomes of Angle Class II subdivision malocclusions may be compromised because of the uncertainty of the aetiology. Previous studies have reported controversial ideas about the origins, but the existence of a primary contributor still remains unknown. Functional factors have been mentioned as a probable cause, but until now, there have been no supporting data. This study was a cross-sectional investigation of the characteristics of Angle Class II subdivision malocclusion, including dental, skeletal and functional factors, by comparison of the subdivision group and the normal occlusion group. The evaluations of dental and skeletal asymmetries of both groups were carried out by cone-beam computed tomography (CBCT) and analysis of dental casts. The functional deviations were evaluated by cast mounting and measuring. In the subdivision group, the asymmetric position of the glenoid fossa was found to be the most significant skeletal asymmetry. No dentoalveolar asymmetry was found in this group. The most important finding was that, in subdivision malocclusions, functional deviation resulting in pseudoasymmetry occurred in 32.86% of the study participants. This deviation is probably related to the disharmonious arch width between maxillary and mandibular dental arches in the premolar section. The origin of Angle Class II subdivision malocclusion is multifactorial, with dental, skeletal and functional factors included. Functional deviation occurs, probably due to dental arch width disharmony. Asymmetric position of the glenoid fossa may account for most of the skeletal asymmetry.

The use of an anterior deprogrammer in a removable prosthodontic case: the key to accurate and predictable centric relation records

Centric relation (CR) is the treatment position of choice when placing removable prosthodontics. The most common method for achieving CR in cases of removable prosthodontics is the bilateral manipulation technique. However, this technique's success depends on the dentist's experience, as it can be hard to perform when patients are stressed and/or uncooperative. Using the chin point guidance technique with an anterior deprogrammer--mainly with fixed prosthodontics--is more predictable and accurate as it achieves CR through temporomandibular joint muscle relaxation. This case report illustrates how an anterior deprogrammer can be used in a combination case such as a maxillary complete denture opposing a mandibular removable partial denture.

Spontaneous neural activity alterations in temporomandibular disorders: a cross-sectional and longitudinal resting-state functional magnetic resonance imaging study

The involvement of the central nervous system in the pathophysiology of temporomandibular disorders (TMD) has been noticed. TMD patients have been shown dysfunction of motor performance and reduced cognitive ability in neuropsychological tests. The aim of this study is to explore the spontaneous neural activity in TMD patients with centric relation (CR)-maximum intercuspation (MI) discrepancy before and after stabilization splint treatment. Twenty-three patients and twenty controls underwent clinical evaluations, including CR-MI discrepancy, Helkimo indices and chronic pain, and resting state functional magnetic resonance imaging scans at baseline. Eleven patients repeated the evaluations and scanning after the initial wearing (T1) and 3months of wearing (T2) of the stabilization splint. The fractional amplitude of low-frequency fluctuation (fALFF) was calculated to compare the neural functions. At baseline, the patients showed decreased fALFF in the left precentral gyrus, supplementary motor area, middle frontal gyrus and right orbitofrontal cortex compared with the controls (P<0.05, AlphaSim corrected). Negative correlations were found between the fALFF in the left precentral gyrus and vertical CR-MI discrepancy of bilateral temporomandibular joints of patients (P<0.05, two-tailed). At T2, the symptoms and signs of the patients were improved, and a stable condylar position on the CR was recovered, with increased fALFF in the left precentral gyrus and left posterior insula compared with pretreatment. The fALFF decrease in the patients before treatment was no longer evident at T2 compared with the controls. The results suggested that TMD patients with CR-MI discrepancy showed significantly decreased brain activity in their frontal cortexes. The stabilization splint elicited functional recovery in these cortical areas. These findings provided insight into the cortical neuroplastic processes underlying TMD with CR-MI discrepancy and the therapeutic mechanisms of stabilization splint.

Evaluation of the reproducibility of two techniques used to determine and record centric relation in angle's class I patients

The centric relation is a mandibular position that determines a balance relation among the temporomandibular joints, the chew muscles and the occlusion. This position makes possible to the dentist to plan and to execute oral rehabilitation respecting the physiological principles of the stomatognathic system. The aim of this study was to investigate the reproducibility of centric relation records obtained using two techniques: Dawson's Bilateral Manipulation and Gysi's Gothic Arch Tracing. Twenty volunteers (14 females and 6 males) with no dental loss, presenting occlusal contacts according to those described in Angle's I classification and without signs and symptoms of temporomandibular disorders were selected. All volunteers were submitted five times with a 1-week interval, always in the same schedule, to the Dawson's Bilateral Manipulation and to the Gysi's Gothic Arch Tracing with aid of an intraoral apparatus. The average standard error of each technique was calculated (Bilateral Manipulation 0.94 and Gothic Arch Tracing 0.27). Shapiro-Wilk test was applied and the results allowed application of Student's t-test (sampling error of 5%). The techniques showed different degrees of variability. The Gysi's Gothic Arch Tracing was found to be more accurate than the Bilateral Manipulation in reproducing the centric relation records.