Marginal bone response of implants with platform switching and non-platform switching abutments in posterior healed sites: a 1-year prospective study

OBJECTIVES

This 1-year prospective study evaluated the implant success rate and marginal bone response of non-submerged implants with platform and non-platform switching abutments in posterior healed sites.

MATERIAL AND METHODS

Nineteen patients (9 male, 10 female) with posterior partially edentulous spaces, between the ages of 23 and 76 (mean = 55.4 years), were included in this study. A total of 30 implants (15 implants restored with platform switching [PS] abutments [control] and 15 implants restored with non-platform switching [NPS] abutments [test]) were assigned between two groups using a randomization procedure. The definitive abutments with conical connections were placed at the time of surgery, and the definitive restorations were placed at 3 months. All patients were evaluated clinically and radiographically using standardized radiographs at time of implant placement (0), 3, 6 and 12 months after implant placement. Data were analyzed using Friedman test with post hoc pairwise comparisons, Mann-Whitney U-test, and Pearson's chi-square test at the significance level of α = 0.05.

RESULTS

At 12 months, all 30 implants remained osseointegrated corresponding to a 100% success rate. The overall mean marginal bone level change at 12 months was -0.04 ± 0.08 mm for PS group and -0.19 ± 0.16 mm for NPS group. Statistically significant difference in the marginal bone level change was observed between groups at 0 to 12 months and 3 to 12 months (P < 0.05).

CONCLUSIONS

This 1-year randomized control study suggests that when a conical implant-abutment connection is present, similar peri-implant tissue responses can be achieved with platform switching and non-platform switching abutments.

Marginal bone changes around platform-switched conical connection implants placed 1 or 2 mm subcrestally: A multicenter crossover randomized controlled trial

INTRODUCTION

This study analyzes early marginal bone modifications occurring around platform-switched implants with conical connection placed 1 or 2 mm subcrestally.

METHODS

This crossover randomized controlled trial enrolled partially edentulous patients needing two implants in either the posterior maxilla or mandible. Each patient received two platform-switched implants with conical connection inserted 2 mm (Test) and 1 mm (Control) subcrestally. Definitive abutments were immediately connected and, after 4 months of unsubmerged healing, screwed metal-ceramic crowns were delivered. Radiographs were taken at implant placement (T0), prosthesis delivery (T1), and after 1 year of prosthetic loading (T2).

RESULTS

Fifty-one patients (25 males and 26 females; mean age 61.2 ± 12.1 years) totaling 102 implants were included in the final analysis. Mean peri-implant bone level (PBL) reduction from T0 to T2 was not significantly different around Test (0.49 ± 0.32 mm) and Control implants (0.46 ± 0.35 mm; p = 0.66). Multivariate linear regression models highlighted a significant positive correlation between history of periodontitis and PBL reduction. At T2, no Test group implant and 6 Control group implants exhibited PBL below the implant platform (11.8% of Control group implants).

CONCLUSION

No significant differences in peri-implant marginal bone changes were demonstrated after 1 year of prosthetic loading between platform-switched implants with conical connection inserted either 1 or 2 mm subcrestally. However, 2 mm subcrestal placement resulted in deeper implant positioning at T2, with no exposure of treated implant surface and potential preventive effect against subsequent peri-implant pathology.

Mechanical Pull-Out Test of a New Hybrid Fixture-Abutment Connection: An In Vitro Study

Implant abutment connection was described among the main causes of peri-implant bone resorption. The aim of this in vitro study was to test the coupling capacity, the surface modification of a new hybrid connection and the influence of repeated connection activations caused during the main clinical and laboratory phases. A total of 40 implant-abutment screw retained systems with 10°-conical and internal hexagon connection were tested. The connection was screwed, fixed to the universal test machine, removed the screw and a pull-out test was performed. Test was repeated five times in succession. Also Scanning Electron Microscopy (SEM) was used to detect microscopically surface modification. Analysis of variance and Tukey tests were used for the statistical analysis. Pull-out test reveals a mean value of 131.35 ± 16.52 Newton Centimeter (N·cm). For each single activation, results from first to fifth were: 113.9 ± 13.02, 126.1 ± 12.81, 138.11 ± 15.15, 138.8 ± 11.90 and 140 ± 12.99 N·cm. A statistically significant difference between the measurements and an increase in the removal force was shown. The collected data supports the use of this new type of connection, resulting in a very strong interface between implant and abutment. Also, repeated activation of connection can promote a better coupling of the implant-abutment interface.

Short, parallel-walled, conical-connection implants for a broad range of indications in the maxilla and mandible: Retrospective multicenter study with up to 33 months of follow-up

OBJECTIVE

To evaluate the survival and complication rate of 7-mm short, parallel-walled, conical-connection implants in daily practice.

METHOD AND MATERIALS

This multicenter retrospective study included 219 consecutive patients who received 323 implants. Indication was limited vertical bone height preventing placement of implants longer than 7 mm. Placement and loading protocols were determined on a case-by-case basis and included placement in fresh extraction sockets and healed sites, and loading was either immediate, early, or delayed. Patients were followed for up to 33 months. Outcome measures were implant survival rate and any biologic or technical complications.

RESULTS

In total, eight implants in seven patients failed, accounting for the survival rate of 97.3% at implant level and 96.4% at patient level. The mean time to failure was 7.5 months and 10.2 months at the implant and patient level, respectively. The majority of patients (67.1%) received one implant and the placement was predominantly in healed sites (82.7%). Immediate loading was done for 21.4% of implants placed in the extraction site and for 21.3% of implants placed in healed sites. In most of the cases (71.8%) implants were placed in the premolar or molar position in the mandible. No complications were reported.

CONCLUSION

These results suggest that in cases of limited vertical bone height, the short, parallel-walled, conical-connection implant can successfully support different prosthesis types in a wide variety of indications and loading protocols.

How do the dimensions of peri-implant mucosa affect marginal bone loss in equicrestal and subcrestal position of implants? A 1-year clinical trial

INTRODUCTION

There is evidence that the apico-coronal implant position and the mucosal phenotype can affect the extent of peri-implant bone loss. This clinical trial analyzes the bone remodeling and marginal bone loss that occur around conical-connection implants placed equicrestally and subcrestally, assessing the effect of the peri-implant soft-tissue phenotype.

METHODS

Fifty-one patients received 56 implants of distinct diameters (3.5 mm Ø n = 6; 4.3 mm Ø n = 41; 5 mm Ø n = 9) in the posterior part of the maxilla or mandible. The implants were placed equicrestally, 1 mm subcrestally and >1 mm subcrestally, depending on the initial supracrestal tissue height (STH). After 3 months of non-submerged healing, single metal-ceramic screw-retained implant-supported crowns were placed. Longitudinal measurements of STH, mucosal thickness and keratinized mucosa width (KMW) were made at the time of implant placement (T0), crown placement (T1), and after 3 (T2) and 6 months (T3) of prosthetic loading. At each of these points, a radiographic evaluation of bone remodeling and marginal bone loss was also performed.

RESULTS

STH was significantly greater for implants placed >1 mm subcrestally than for those placed 1 mm subcrestally. After 12 months of follow-up, a very significant (p < 0.001) loss of KMW was observed, in addition to a marginal bone loss of 0.08 ± 0.1, 0.15 ± 0.2, and 0.14 ± 0.2 mm in the groups placed equicrestally, 1 mm subcrestally and >1 mm subcrestally, respectively. After the multiple linear regression, marginal bone loss was found to depend primarily on KMW (β = -0.43), while also being affected by STH (β = 0.32) and implant diameter (β = -0.28).

CONCLUSIONS

Marginal bone loss may be influenced by the position with respect to the bone crest, as well as the KMW, STH, and implant diameter. However, more well-controlled studies are needed to verify these above-mentioned findings with different implant designs and connections.

Immediate versus delayed loading of post-extraction implants in the aesthetic zone: a prospective longitudinal study with 4-year follow-up

The aim of this randomized clinical trial was to compare the outcome of immediate versus delayedloading protocol using a new conical connection implant in post-extractive sockets with 4-year followup. Patients requiring single-tooth extraction for root fractures or periodontal disease in the maxillary or mandibular anterior or premolar areas were selected for the present study. After extraction, implants were placed immediately in fresh sockets. After randomization process, in group A immediate loading was performed while in group B a delayed loading protocol was followed. In both groups mean marginal bone loss was measured through intraoral digital radiographs at 3, 6, 12, 24, 36 and 48 months from loading. After a 48-month follow-up period, a success and survival rate of 96.55% was found in both groups. At 48-month follow-up, for group A a mean marginal bone loss of 0.14 ± 0.15mm was found, while for group B a value of 0.12 ± 0.12 mm was measured. No statistically significant differences between groups were found at each time point (P>0.05). When used in post-extractive immediate and delayed loading implant rehabilitations, the new conical connection implant showed a predictable outcome at 48-month follow-up. However, further clinical studies are needed to evaluate soft tissues adaptation, patient satisfaction, and long-term follow-up.

Volumetric Changes in Morse Taper Connections After Implant Placement in Dense Bone. In-Vitro Study

The stability of the implant-abutment interface is crucial for the maintenance of the implant index integrity. Several factors are capable of inducing deformation in implant-abutment connection, such as the actual insertion of the implant into the bone. This study aimed to evaluate the deformations produced in the connection after the insertion of the implant. Ten implants with two different implant carriers (Type A: carrier attached to platform and Type B: carrier attached inside the index-connection) were placed in artificial Type II bone, and volumetric changes were evaluated for different connection features with a 3D digital microscope. ANOVA (analysis of variance), Wilcoxon, and Tukey HSD post-test were used for statistical comparisons. Type A implants presented deformation at the platform level (inner slot angles and slot width), but no volumetric changes were observed inside the connection. Type B implants presented deformation in three parameters inside the connection (outer channel length, coronal step width, and coronal step length). Within the limitations of this study, we can conclude that more deformation is expected at the internal connection when the implant carrier engages this area. The engagement area should be as far away as possible from the index connection.