Simulation clinic waste audit assessment and recommendations at the University of Washington School of Dentistry

OBJECTIVE

Dentistry produces waste contributing to climate change and adverse health outcomes, thus reducing waste is essential; however, there has been minimal emphasis on sustainability or climate action in dentistry. Waste audits quantify the type and amount of waste produced and may inform waste reduction strategies. We conducted a waste audit to identify areas of potential waste reduction and recommend interventions to reduce waste.

METHODS

In this cross-sectional study, we conducted a waste audit of garbage produced during a typical 4-hour pre-clinical restorative dentistry simulation exercise. The sample was composed of 72 second-year dental students. This exercise is part of a standard curriculum with a uniform format regarding supplies used and participants. Potentially infectious materials were not used during this exercise.

RESULTS

In total, 26.6 kg of waste was discarded. Plastic was the largest contributor by mass (57.5%), followed by paper barriers (19.6%), then impression materials (6.5%). We found 894 gloves and 70 masks discarded.

CONCLUSIONS

Based on these findings, we categorized waste reduction opportunities into policy changes, purchasing sustainable materials, and increasing awareness through education. Specific suggested actions include: relaxing glove and gown requirements during laboratory simulations; replacing single use items with more sustainable options; increasing use of intraoral scanners; and posting informational signage with examples of what can be recycled.

Impact of pedagogical method on Brazilian dental students' waste management practice

The purpose of this study was to conduct a qualitative analysis of waste management practices among a group of Brazilian dental students (n=64) before and after implementing two different pedagogical methods: 1) the students attended a two-hour lecture based on World Health Organization standards; and 2) the students applied the lessons learned in an organized group setting aimed toward raising their awareness about socioenvironmental issues related to waste. All eligible students participated, and the students' learning was evaluated through their answers to a series of essay questions, which were quantitatively measured. Afterwards, the impact of the pedagogical approaches was compared by means of qualitative categorization of wastes generated in clinical activities. Waste categorization was performed for a period of eight consecutive days, both before and thirty days after the pedagogical strategies. In the written evaluation, 80 to 90 percent of the students' answers were correct. The qualitative assessment revealed a high frequency of incorrect waste disposal with a significant increase of incorrect disposal inside general and infectious waste containers (p<0.05). Although the students' theoretical learning improved, it was not enough to change behaviors established by cultural values or to encourage the students to adequately segregate and package waste material.

Solid waste production and its management in dental clinics in Gorgan, northern Iran

BACKGROUND

Waste produced in dental clinics has been the topic of investigations for many years. These waste materials have important health impacts and are hazardous to humans and the environment.

OBJECTIVE

To investigating solid waste production and its management in dental clinics in Gorgan, northern Iran.

METHODS

In this cross-sectional study, 45 of 143 public dental practices and 5 of 25 private dental practices were selected and studied. From each clinic, 3 samples were taken and analyzed at the end of successive working days (Tuesday and Wednesday). Samples were manually sorted into 50 components. The measured components were then classified on the basis of their characteristics, hazard potentials, and WHO classification.

RESULTS

The total annual amount of dental waste produced in public and private dental practices in Gorgan was 12 015.1 and 3135.0 kg, respectively. Production percentages of infectious, domestic, chemical and pharmaceutical, and toxic waste in public dental practices were 38.4%, 33.7%, 6.6%, and 0.6%, respectively. The percentages for private practices were 8.7%, 10.6%, 1.1%, and 0.1%, respectively.

CONCLUSION

Dental waste management in Gorgan is inadequate; dental waste is not properly segregated, collected, and disposed, as demanded by the WHO. Employees in dentist offices must be trained in correct handling of waste products and the associated risks.

Effect of sodium hypochlorite and peracetic acid on the surface roughness of acrylic resin polymerized by heated water for short and long cycles

OBJECTIVE

To evaluate the surface roughness of acrylic resin submitted to chemical disinfection via 1% sodium hypochlorite (NaClO) or 1% peracetic acid (C2H4O3).

MATERIALS AND METHODS

The disc-shaped resin specimens (30 mm diameter ×4 mm height) were polymerized by heated water using two cycles (short cycle: 1 h at 74°C and 30 min at 100°C; conventional long cycle: 9 h at 74°C). The release of substances by these specimens in water solution was also quantified. Specimens were fabricated, divided into four groups (n = 10) depending on the polymerization time and disinfectant. After polishing, the specimens were stored in distilled deionized water. Specimens were immersed in 1% NaClO or 1% C2H4O3 for 30 min, and then were immersed in distilled deionized water for 20 min. The release of C2H4O3 and NaClO was measured via visual colorimetric analysis. Roughness was measured before and after disinfection. Roughness data were subjected to two-way ANOVA and Tukey's test.

RESULTS

There was no interaction between polymerization time and disinfectant in influencing the average surface roughness (Ra, P = 0.957). Considering these factors independently, there were significant differences between short and conventional long cycles (P = 0.012), but no significant difference between the disinfectants hypochlorite and C2H4O3 (P = 0.366). Visual colorimetric analysis did not detect release of substances.

CONCLUSION

It was concluded that there was the difference in surface roughness between short and conventional long cycles, and disinfection at acrylic resins polymerized by heated water using a short cycle modified the properties of roughness.

The management of dental waste in dental offices and clinics in Shiraz, Southern Iran

BACKGROUND

Dental waste can be hazardous to humans and the environment.

OBJECTIVE

To determine the current status of dental waste management in private and public dental clinics and private dental offices in Shiraz, southern Iran.

METHODS

This cross-sectional study was conducted at the Shiraz University of Medical Sciences from February through June 2013. A stratified random sampling method was used to study 86 private offices, 14 private clinics and 10 public clinics. Types of waste studied included mercury and amalgam, lead foil packets, sharps, infectious tissues and fluids, pharmaceuticals and domestic waste materials. Compliance with established standards by the monitored dental offices and clinics and public clinics were compared.

RESULTS

89.1% of dental offices and clinics disposed their infectious waste with domestic waste. Only 60% of centers used standard method for sharps disposal. None of the dental centers disposed their pharmaceutical waste and x-ray fixer waste by standard methods. Less than 10% of centers recycled the amalgam and lead foil pockets waste to the manufacture.

CONCLUSION

Government agencies should establish monitoring programs for all dental offices and clinics to identify noncompliant activity and enforce recommended regulations.