Bond Analysis of Titanium Rods Embedded in Masonry

Among the techniques utilized for strengthening masonry structures with advanced materials, the adoption of near-surface mounted (NSM) titanium rods stands out as a promising method for increasing the flexural and shear strength of masonry structures. This method is also known as Bed Joint Reinforcement. Ensuring an effective performance of this technique hinges on establishing a strong bond between the NSM reinforcement and the substrate masonry material. The primary objective of this project was to study the mechanics of this bond using NSM threaded and smooth titanium rods while scrutinizing the impact of key parameters on bond performance. Variables under investigation encompassed the rod type (smooth and threaded), bond length, and the material used to fill the groove (type of mortars). It was found that threaded rods outperformed all other types investigated, and pull-out strengths can be significantly improved through careful selection and optimization of the mortar type and bond length.

Physical-Mechanical Properties of Stone Masonry of Gjirokastër, Albania

In addition to reinforced concrete and steel buildings, a large part of the existing building stock in Europe is made of stone masonry. Prediction of the structural behavior requires the development of a systematic material characterization of the mechanical properties and structural details (units, arrangement, bonding, inter-connection). This study aims to analyze the mechanical and physical behavior of building stones in the historical city of Gjirokastër, Albania, known also as the Stone City. A thorough investigation of the regional stone quarries was performed, and the collected samples were cut into regular prismatic specimens for further analysis. The experimental campaign consisted of the determination of flexural strength and compressive strength, water absorption, porosity, specific gravity as well as structural analysis of the masonry material, using the MQI (Masonry Quality Index) method. The test results showed that there is a large scattering in the values of the mechanical and physical stone properties such as compressive strength varying from 20 to 115 MPa and flexural strength from 8 to 25 MPa. However, the analysis of the masonry material revealed a satisfactory structural performance, based on a frequent, systematic respect of the good construction practices (i.e., the rules of the art) in Gjirokastër.

Polypropylene as a Retrofitting Material for Shear Walls

In recent years, on account of their excellent mechanical properties, composite materials (made of epoxy-bonded carbon, glass, or aramid fibers) have been used to reinforce masonry walls against in-plane actions. These materials have proven to be an effective solution for the strengthening of unreinforced masonry (URM) walls. Lately, research has shifted to the study of different types of fibers to avoid the use of epoxy adhesives, whose long-term behavior and compatibility with masonry are poor. This paper describes an experimental program that investigated the behavior of URM shear walls strengthened with two types of commercially available polypropylene products: short fibers (fiber length = 12 mm) and polypropylene nets. This investigation aimed to evaluate the influence of polypropylene reinforcement, embedded into an inorganic matrix, in terms of the improvement of the lateral load-carrying capacity, failure mechanism, ductility, and energy dissipation capacity of URM wall panels, where nine walls were subjected to in-plane loads using a racking test setup. The study showed that using two layers of polypropylene fibers embedded into a cementitious matrix greatly increased the in-plane load capacity of the brickwork masonry. On the other hand, the test results indicated that polypropylene nets, used as a repair method for cracked shear walls, cannot improve the structural performance of the walls.

Repair of Block Masonry Panels with CFRP Sheets

In the 1980s, block masonry started to be widely used for new constructions in Italy's earthquake prone areas. However, recent seismic events demonstrated that block masonry buildings may need to be repaired after earthquakes due to cracking. Construction defects are the main cause for cracking of block work masonry. Carbon fiber reinforced polymer (CFRP) sheets have been used as a local repair method for non-defective and defective wall panels. An experimental program was formulated to investigate the shear behavior of block masonry walls repaired with CFRP sheets. A total of six wall panels were constructed in the laboratory and tested in shear (in-plane lateral loading). It was found that, although the control (non-defective) wall panels had a high ultimate load capacity, the use of CFRPs reduces the effects of construction defects and restores the lateral load capacity in non-defective walls. Overall, this research suggests that the use of epoxy-bonded CFRP sheets could be used for local repair of cracked wall panels.

Seismic Behavior of Superelastic Shape Memory Alloy Spring in Base Isolation System of Multi-Story Steel Frame

Owing to excellent re-centering capability and good damping behavior, superelastic shape memory alloys (SMAs) are emerging as a potential new material to enhance the seismic resilience of civil structures. This paper focuses on using base isolation with SMA device for isolated structures. SMA springs are deemed to be promising candidate as the damper in the base isolation system, due to the compact form, damping contribution, restoring capability and flexible stiffness. This paper reported the concept of an innovative spring which is made of superelastic SMA wire. Then cyclic loading tests were carried out to evaluate the interested cyclic properties. Parametric analyses based on finite element simulations were conducted to reveal the versatile performance of SMA springs. To further examine its seismic behavior in the base isolation system, the SMA spring was later installed at the isolation level of a multi-story steel frame, based on the finite element model built in the earthquake engineering simulation platform OpenSees. An ordinary elastic spring is included for comparison to highlight the features of SMA springs. Both isolated frames were subjected to real earthquakes. The comparisons indicated that using SMA spring is more effective in controlling maximum and residual deformation for the protected superstructures. Thus, this paper well demonstrated the feasibility and merits of using SMA springs in the isolated frames.

Closed-form rocking overturning conditions for a family of pulse ground motions

This paper characterizes the stability of a rigid rocking block subjected to a family of multi-lobe pulse ground motions. It unveils a counter to intuition plurality of overturning (OT) modes despite the short duration and bounded energy of the examined ground motions. Accordingly, it describes with original closed-form expressions the critical conditions of all OT modes involving a finite number of impacts. It also proposes pertinent semi-analytical, exact analytical and approximate analytical solutions with respect to the determination of the (unknown) times of impact, as appropriate. The analysis reveals that the first, or lower bound, critical OT mode is in most cases toppling during free rocking after one impact specifically before the end of the pulse. For this case, it elucidates the physical mechanism behind the timing of impact that produces minimum amplitude and maximum amplitude critical OT, respectively, and proposes pertinent closed-form approximations. Finally, the study derives, in 'universal' terms, global 'safety walls' against rocking OT considering a large number of different pulse shapes.