Liquid-Metal Microdroplets Formed Dynamically with Electrical Control of Size and Rate

Liquid metal co-injected with electrolyte through a microfluidic flow-focusing orifice forms droplets with diameters and production frequencies controlled in real time by voltage. Applying voltage to the liquid metal controls the interfacial tension via a combination of electrochemistry and electrocapillarity. This simple and effective method can instantaneously tune the size of the microdroplets, which has applications in composites, catalysts, and microsystems.

Low-cost experimentation for the study of droplet microfluidics

The continued growth of microfluidics into industry settings in areas such as point-of-care diagnostics and targeted therapeutics necessitates a workforce trained in microfluidic technologies and experimental methods. Laboratory courses for students at the university and high school levels will require cost-effective in-class demonstrations that instruct in chip design, fabrication, and experimentation at the microscale. We present a hand-operated pressure pumping system to form monodisperse picoliter to nanoliter droplet streams at low cost, and a series of exercises aimed at instructing in the specific art of droplet formation. Using this setup, the student is able to generate and observe the modes of droplet formation in flow-focusing devices, and the effect of device dimensions on the characteristics of formed droplets. Lastly, at ultra-low cost we demonstrate large plug formation in a T-junction using coffee stirrers as a master mold substitute. Our method reduces the cost of experimentation to enable intuitive instruction in droplet formation, with additional implications for creating droplets in the field or at point-of-care.

Geometry Effects of Axisymmetric Flow-Focusing Microchannels for Single Cell Encapsulation

Cell microencapsulation is a promising technique to protect living cells in biomedical applications. Microfluidic devices can be utilized to control the production of high-throughput cell-laden droplets. This paper demonstrates the effects of flow-focusing geometry on the droplet size, frequency of droplet generation, and number of cells per droplet. Orifice radius, orifice length, and nozzle-to-orifice distance can significantly influence the flow-field and manipulate droplet formation. This paper analyzes these geometry effects using a numerical front-tracking method for the three fluid phases. It is found that as the orifice radius increases, the drop size and the number of cells in the droplet increase. For a short orifice radius, increasing the orifice length results in the generation of smaller droplets at higher frequency and fewer cells per droplet. On the other hand, for a longer orifice, droplet production is invariant with respect to orifice length. It is also found that shorter distances between the nozzle and the orifice lead to a more controlled and uniform production of droplets. When the nozzle-to-orifice length is increased, the droplet formation becomes non-uniform and unpredictable. Probability charts are plotted with respect to the orifice length and orifice radius, which show that a greater than 50 % probability of single cell encapsulation can be achieved consistently.

Mode Transition of Droplet Formation in a Semi-3D Flow-Focusing Microfluidic Droplet System

Uniform droplets have significant potential in many biological applications due to their higher surface area to volume ratio. This paper proposed a semi-three-dimensional (sime-3D) flow-focusing microfluidic system, which was fabricated using the multi-layer soft lithography method. Based on the semi-3D structure, we focus on droplets formation modes and droplet uniformity at different bulk concentration of surfactant. The relationships between droplets uniformity, droplets breakup processes (jetting mode, dripping mode and tip-streaming mode) and surfactant concentration was investigated. It was found that three droplet generation modes occur through adjusting the pressure ratio in two inlet channels and the concentration of surfactant in continuous phase liquid. The jetting mode would transform to the dripping mode or the tip-streaming mode as the pressure ratio in different surfactant concentrations increased. Furthermore, the uniformity of droplets could be improved through the transition of jetting to dripping mode. We assumed that the uniformity declined through the transition of jetting to tip-streaming, and explored the specific transitions from jetting to dripping mode and tip-streaming mode. Dripping mode leads to high droplet uniformity, and generation frequency decreases with increasing pressure ratio. Tip-streaming mode is considered as an extreme state of jetting mode, leading to higher formation frequency and smaller droplet size at low uniformity.

Amphiphilic Polysaccharides Acting both as Stabilizers and Surface Modifiers during Emulsification in Microfluidic Flow-Focusing Junction

A continuous emulsion/solvent diffusion process was designed for the preparation of polysaccharide-covered poly(d,l-lactide) (PLA) microparticles. The emulsification step was carried out in a flow-focusing junction where ethyl acetate containing dissolved PLA was dispersed into an aqueous solution of hydrophobically modified dextran. It was demonstrated that poly(dimethylsiloxane) devices could be used for oil-in-water emulsion preparation provided that the microfluidic devices were preconditioned by simply circulating the aqueous phase containing the amphiphilic polysaccharide during a sufficient time (30 h). The adsorption of the polymers at the surface of the channel walls permitted the wetting by the aqueous phase with a hydrophilic character maintained at least throughout 2 months. The preconditioning time was significantly reduced by pretreating the microfluidic device with piranha solution and KOH solution during 15 min each before the circulation of the aqueous solution of dextran derivative. Dextran-covered PLA microparticle aqueous suspensions were produced with well-controlled size distribution. The suspensions could be lyophilized and reconstituted by retrieving the initial size distribution without adding any cryoprotectant. The reported procedure was used for preparing octyl gallate-loaded PLA microparticles.

Nanofibril Alignment during Assembly Revealed by an X-ray Scattering-Based Digital Twin

The nanostructure, primarily particle orientation, controls mechanical and functional (e.g., mouthfeel, cell compatibility, optical, morphing) properties when macroscopic materials are assembled from nanofibrils. Understanding and controlling the nanostructure is therefore an important key for the continued development of nanotechnology. We merge recent developments in the assembly of biological nanofibrils, X-ray diffraction orientation measurements, and computational fluid dynamics of complex flows. The result is a digital twin, which reveals the complete particle orientation in complex and transient flow situations, in particular the local alignment and spatial variation of the orientation distributions of different length fractions, both along the process and over a specific cross section. The methodology forms a necessary foundation for analysis and optimization of assembly involving anisotropic particles. Furthermore, it provides a bridge between advanced in operandi measurements of nanostructures and phenomena such as transitions between liquid crystal states and in silico studies of particle interactions and agglomeration.

Prediction of Droplet Production Speed by Measuring the Droplet Spacing Fluctuations in a Flow-Focusing Microdroplet Generator

In a flow-focusing microdroplet generator, by changing the flow rates of the two immiscible fluids, production speed can be increased from tens to thousands of droplets per second. However, because of the nonlinearity of the flow-focusing microdroplet generator, the production speed of droplets is difficult to quantitatively study for the typical flow-focusing geometry. In this paper, we demonstrate an efficient method that can precisely predict the droplet production speed for a wide range of fluid flow rates. While monodisperse droplets are formed in the flow-focusing microchannel, droplet spacing as a function of time was measured experimentally. We discovered that droplet spacing changes periodically with time during each process of droplet generation. By comparing the frequency of droplet spacing fluctuations with the droplet production speed, precise predictions of droplet production speed can be obtained for different flow conditions in the flow-focusing microdroplet generator.

Robust Assembly of Cross-Linked Protein Nanofibrils into Hierarchically Structured Microfibers

Natural, high-performance fibers generally have hierarchically organized nanosized building blocks. Inspired by this, whey protein nanofibrils (PNFs) are assembled into microfibers, using flow-focusing. By adding genipin as a nontoxic cross-linker to the PNF suspension before spinning, significantly improved mechanical properties of the final fiber are obtained. For curved PNFs, with a low content of cross-linker (2%) the fiber is almost 3 times stronger and 4 times stiffer than the fiber without a cross-linker. At higher content of genipin (10%), the elongation at break increases by a factor of 2 and the energy at break increases by a factor of 5. The cross-linking also enables the spinning of microfibers from long straight PNFs, which has not been achieved before. These microfibers have higher stiffness and strength but lower ductility and toughness than those made from curved PNFs. The fibers spun from the two classes of nanofibrils show clear morphological differences. The study demonstrates the production of protein-based microfibers with mechanical properties similar to natural protein-based fibers and provides insights about the role of the nanostructure in the assembly process.

An experimental study of liquid micro-jets produced with a gas dynamic virtual nozzle under the influence of an electric field

The results of an experimental study of micro-jets produced with a gas dynamic virtual nozzle (GDVN) under the influence of an electric field are provided and discussed for the first time. The experimental study is performed with a 50% volume mixture of water and ethanol, and nitrogen focusing gas. The liquid sample and gas Reynolds numbers range from 0.09-5.4 and 0-190, respectively. The external electrode was positioned 400-500 μm downstream of the nozzle tip and an effect of electric potential between the electrode and the sample liquid from 0-7 kV was investigated. The jetting parametric space is examined as a function of operating gas and liquid flow rates, outlet chamber pressure, and an external electric field. The experimentally observed jet diameter, length and velocity ranged from 1-25 μm, 50-500 μm and 0.5-10 m/s, respectively. The jetting shape snapshots were processed automatically using purposely developed computer vision software. The velocity of the jet was calculated from the measured jet diameter and the sample flow rate. It is found that micro-jets accelerate in the direction of the applied electric field in the downstream direction at a constant acceleration as opposed to the standard GDVNs. New jetting modes were observed, where either the focusing gas or the electric forces dominate, encouraging further theoretical and numerical studies towards optimized system design. The study shows the potential to unlock a new generation of low background sample delivery for serial diffraction measurements of weakly scattering objects.