Adaptation strategies of endolithic chlorophototrophs to survive the hyperarid and extreme solar radiation environment of the Atacama Desert

The Atacama Desert, northern Chile, is one of the driest deserts on Earth and, as such, a natural laboratory to explore the limits of life and the strategies evolved by microorganisms to adapt to extreme environments. Here we report the exceptional adaptation strategies of chlorophototrophic and eukaryotic algae, and chlorophototrophic and prokaryotic cyanobacteria to the hyperarid and extremely high solar radiation conditions occurring in this desert. Our approach combined several microscopy techniques, spectroscopic analytical methods, and molecular analyses. We found that the major adaptation strategy was to avoid the extreme environmental conditions by colonizing cryptoendolithic, as well as, hypoendolithic habitats within gypsum deposits. The cryptoendolithic colonization occurred a few millimeters beneath the gypsum surface and showed a succession of organized horizons of algae and cyanobacteria, which has never been reported for endolithic microbial communities. The presence of cyanobacteria beneath the algal layer, in close contact with sepiolite inclusions, and their hypoendolithic colonization suggest that occasional liquid water might persist within these sub-microhabitats. We also identified the presence of abundant carotenoids in the upper cryptoendolithic algal habitat and scytonemin in the cyanobacteria hypoendolithic habitat. This study illustrates that successful lithobiontic microbial colonization at the limit for microbial life is the result of a combination of adaptive strategies to avoid excess solar irradiance and extreme evapotranspiration rates, taking advantage of the complex structural and mineralogical characteristics of gypsum deposits-conceptually called "rock's habitable architecture." Additionally, self-protection by synthesis and accumulation of secondary metabolites likely produces a shielding effect that prevents photoinhibition and lethal photooxidative damage to the chlorophototrophs, representing another level of adaptation.

Improvement of Performances of the Gypsum-Cement Fiber Reinforced Composite (GCFRC)

The novelty of this paper lies in the identification of the scientific patterns of the influence of thermal power plant waste (TPPW) on the hydration mechanism and the structure of the gypsum-cement binder (GCB). The classification of raw materials for the production of GCB has been developed taking into account the genesis, which contributes to the prediction of the properties of composites. The features of the hydration phase formation and hardening of GCB have been studied taking into account the chemical, structural and morphological features of fly ash and slag. In addition, the microstructural, morphological, and thermal properties of the cured binders at a 28 day cure were determined. For the first time, scientific data on the properties of gypsum-cement fiber-reinforced composite using TPPW and microfiber have been obtained. The results show that the synergistic effect of gypsum-cement binder, TPPW, and polyamide or basalt microfiber improves the physicomechanical properties of a 28 day cured binder: compressive strength of 20 MPa, flexural strength of 8.9 MPa, and softening coefficient 0.87.

Contrasting Behaviors between Gypsum and Silica Scaling in the Presence of Antiscalants during Membrane Distillation

Mineral scaling is a major constraint that limits the performance of membrane distillation (MD) for hypersaline wastewater treatment. Although the use of antiscalants is a common industrial practice to mitigate mineral scaling, the effectiveness and underlying mechanisms of antiscalants in inhibiting different mineral scaling types have not been systematically investigated. Herein, we perform a comparative investigation to elucidate the efficiencies of antiscalant candidates with varied functional groups for mitigating gypsum scaling and silica scaling in MD desalination. We show that antiscalants with Ca(II)-complexing moieties (e.g., carboxyl group) are the most effective to inhibit gypsum scaling formed via crystallization, whereas amino-enriched antiscalants possess the best performance to mitigate silica scaling created by polymerization. A set of microscopic and spectroscopic analyses reveal distinct mechanisms of antiscalants required for those two common types of scaling. The mitigating effect of antiscalants on gypsum scaling is attributed to the stabilization of scale precursors and nascent CaSO₄ nuclei, which hinders phase transformation of amorphous CaSO₄ toward crystalline gypsum. In contrast, antiscalants facilitate the polymerization of silicic acid, immobilizing active silica precursors and retarding the gelation of silica scale layer on the membrane surface. Our study, for the first time, demonstrates that antiscalants with different functionalities are required for the mitigation of gypsum scaling and silica scaling, providing mechanistic insights on the molecular design of antiscalants tailored to MD applications for the treatment of wastewaters containing different scaling types.

Mechanism of water extraction from gypsum rock by desert colonizing microorganisms

Microorganisms, in the most hyperarid deserts around the world, inhabit the inside of rocks as a survival strategy. Water is essential for life, and the ability of a rock substrate to retain water is essential for its habitability. Here we report the mechanism by which gypsum rocks from the Atacama Desert, Chile, provide water for its colonizing microorganisms. We show that the microorganisms can extract water of crystallization (i.e., structurally ordered) from the rock, inducing a phase transformation from gypsum (CaSO4·2H2O) to anhydrite (CaSO4). To investigate and validate the water extraction and phase transformation mechanisms found in the natural geological environment, we cultivated a cyanobacterium isolate on gypsum rock samples under controlled conditions. We found that the cyanobacteria attached onto high surface energy crystal planes ({011}) of gypsum samples generate a thin biofilm that induced mineral dissolution accompanied by water extraction. This process led to a phase transformation to an anhydrous calcium sulfate, anhydrite, which was formed via reprecipitation and subsequent attachment and alignment of nanocrystals. Results in this work not only shed light on how microorganisms can obtain water under severe xeric conditions but also provide insights into potential life in even more extreme environments, such as Mars, as well as offering strategies for advanced water storage methods.

Effect of Gypsum on Hydration and Hardening Properties of Alite Modified Calcium Sulfoaluminate Cement

Calcium sulphoaluminate cement (CSA) has the characteristics of quick hardening, high early strength and high impermeability, however its strength growth persistence in the middle and late stages (after the age of 3 days) is poor. In order to improve this disadvantage, the pilot production of alite (C₃S) modified CSA (AMCSA) clinker was carried out by liquid phase manipulation and barium ion doping technology. The effects of different dosages of gypsum on the hydration and hardening properties of AMCSA, such as setting time, hydration rate, compressive strength and hydration products, were studied. The results show that the mineral content of ye’elimite, C₂S, C₃S and iron phase in the calcined AMCSA clinker are 48.5 wt.%, 32.6 wt.%, 11.7 wt.% and 7.2 wt.% respectively, which are close to the designed mineral composition. The stable coexistence of ye’elimite and C₃S in the same clinker system is realized. The initial and final setting time of AMCSA are retarded with the increasing gypsum dosage. When the gypsum dosage is 15 wt.% under the experimental conditions in this study, the AMCSA mortar reaches the highest compressive strength at every age. The strength of AMCSA mortar at 28 days is still significantly improved compared with that at 3 days, which indicates that the shortcoming of the low strength growth persistence of CSA in the middle and late stages is improved.

Effect of Gypsum on the Early Hydration of Cubic and Na-Doped Orthorhombic Tricalcium Aluminate

The tricalcium aluminate (C₃A) and sulfate content in cement influence the hydration chemistry, setting time and rheology of cement paste, mortar and concrete. Here, in situ experiments are performed to better understand the effect of gypsum on the early hydration of cubic (cub-)C₃A and Na-doped orthorhombic (orth-)C₃A. The isothermal calorimetry data show that the solid-phase assemblage produced by the hydration of C₃A is greatly modified as a function of its crystal structure type and gypsum content, the latter of which induces non-linear changes in the heat release rate. These data are consistent with the in situ X-ray diffraction results, which show that a higher gypsum content accelerates the consumption of orth-C₃A and the subsequent precipitation of ettringite, which is contrary to the cub-C₃A system where gypsum retarded the hydration rate. These in situ results provide new insight into the relationship between the chemistry and early-age properties of cub- and orth-C₃A hydration and corroborate the reported ex situ findings of these systems.

Landscape effects on pollination networks in Mediterranean gypsum islands

Habitat fragmentation is a major driver of global change that has operated historically on Mediterranean ecosystems. However, more needs to be understood about how fragmentation influences ecological interactions, particularly pollination. Gypsum outcrops are historically fragmented Mediterranean habitats and settings for the evolution of many endangered soil-specialist plants with narrow ranges. In this study, we aimed to determine how fragmentation (area and connectivity) affects: (i) pollinator community composition and (ii) structural properties of pollination networks; and whether there are differences in the effects of fragmentation on: (iii) the number of interactions and visits among pollinator functional groups; and (iv) the number of interactions and specialisation degree between soil-specialist and soil-generalist plants. We characterised the degree of fragmentation and the pollination network structures in 12 gypsum habitat fragments embedded in a cropland matrix during two consecutive years. We found significant relationships between fragmentation and network structure. The effects of fragmentation differed among pollinator functional groups, but not between soil-specialist and soil-generalist plants, in terms of number of interactions. However, the relatively higher pollinator specialisation of soil-specialist plants suggested greater dependence on pollinators. Inter-annual variations in the network structures demonstrated the importance of temporal replication. The observed patterns related to the landscape structure and pollination at both the network and species levels provide insights into the key ecological processes in gypsum islands. These findings may help to identify the potential drivers of species persistence, especially for endangered soil-specialist plants with narrow ranges in a changing scenario with exacerbated habitat fragmentation.

Applications of Sustainable Polymer-Based Phase Change Materials in Mortars Composed by Different Binders

Eco-sustainable, low toxic and low flammable poly-ethylene glycol (PEG) was forced into flakes of the porous Lecce stone (LS), collected as stone cutting wastes, employing a very simple cheap method, to produce a “form-stable” phase change material (PCM). The experimental PCM was included in mortars based on different binders (hydraulic lime, gypsum and cement) in two compositions. The main thermal and mechanical characteristics of the produced mortars were evaluated in order to assess the effects due to the incorporation of the PEG-based PCM. The mortars containing the PEG-based PCM were found to be suitable as thermal energy storage systems, still displaying the characteristics melting and crystallization peaks of PEG polymer, even if the related enthalpies measured on the mortars were appreciably reduced respect to pure PEG. The general reduction in mechanical properties (in flexural and compressive mode) measured on all the mortars, brought about by the presence of PEG-based PCM, was overcome by producing mortars possessing a greater amount of binder. The proposed LS/PEG composite can be considered, therefore, as a promising PCM system for the different mortars analyzed, provided that an optimal composition is identified for each binder.

Deterioration Process of Concrete Exposed to Internal Sulfate Attack

Damage to concrete structures with gypsum-contaminated aggregate occurs frequently. Aggregates in much of the southern part of China are contaminated with gypsum. Therefore, in this study, the effects of using different quantities of gypsum-contaminated aggregate on the expansion and compressive strength of concrete were investigated over a period of one year. Two groups of concrete were designed with the gypsum-contaminated aggregate containing different parts of fine and coarse aggregate, respectively. The SO₃ contents were 0%, 0.5%, 1%, 1.5%, 3%, 5%, and 7% by weight of aggregate. X-ray diffraction (XRD), thermogravimetry (TG), and differential scanning calorimetry (DSC) were used to analyze the change in mineral composition over time. The microstructure was also studied by scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS). The results showed that significant expansion and great loss in compressive strength did not occur in concrete if the content of SO₃ lay below 1.5% and 3% in fine and coarse aggregates, respectively. The concentration of sulfate ions in concrete was not enough to form new a phase of gypsum. During the process of internal sulfate attack, the content of gypsum decreased and the content of ettringite increased. Ettringite was the main reason for the expansion damage of concrete. Additionally, the fracture mode of internal sulfate attack on concrete was the crack extension from gypsum to paste; finally, the aggregate separated from the paste.

Comparison of the Thermal Properties of Geopolymer and Modified Gypsum

The paper presents the results of research concerning the influence of micromaterials on the heat conductivity coefficient λ, specifically heat Cp and thermal diffusivity a of modified gypsum and geopolymer. Microspheres, hydroxyethyl methylcellulose (HEMC) polymer, and aerogel were used as the gypsum’s modifying materials. The study also investigated an alkali potassium-activated methakaolin-based geopolymer with the addition of aluminium dust. During the measurements of thermal parameters, the nonstationary method was chosen, and an Isomet device—which recorded the required physical quantities—was used. When compared to the reference sample, a decrease in the thermal conductivity and diffusivity of the hardened gypsum— and a simultaneous increase in specific heat—was observed with the addition of micromaterials. The geopolymer sample was characterized by the lowest value of thermal conductivity, equal to 0.1141 W/(m·K). It was over 62% lower than the reference sample containing only gypsum. The experimental values of the thermal conductivity of the gypsum samples with the addition of HEMC, aerogel and microspheres were, respectively, over 23%, 6%, and 8% lower than those of the unmodified gypsum samples. The lowest values of thermal conductivity were observed in the case of the gypsum samples modified with polymer; this resulted from the fact that the polymer caused the greatest change in the structure of the gypsum’s composite, which were expressed by the lowest density and highest porosity.

Changes in the Strength Properties and Phase Transition of Gypsum Modified with Microspheres, Aerogel and HEMC Polymer

The paper presents an assessment of the impact of using additives on the strength of a binding material, i.e., building gypsum, and also the phase transformation that takes place in it. Microspheres, aerogel and polymer (HEMC) additives were added to a building gypsum slurry with a water to gypsum ratio of 0.75. In order to investigate their influence on bending strength, compressive strength, and the effect of high temperatures, differential scanning calorimetry (DSC), as well as tests of the multicomponent binder, were carried out in accordance with the applicable PN-EN 13279-2:2005 standard. The obtained test results allowed to determine that the used additives influenced the strength parameters of the obtained composites. It was shown that the applied additives decreased the compressive and bending strength of the modified gypsum. Despite these properties, the obtained gypsum materials are environmentally friendly because they reuse wastes, such as microspheres. Out of all the applied additives, the use of microspheres in an amount of 10% caused a decrease in the bending strength by only 10%, and an increase in the compressive strength by 4%.

A Scanning Transmission X-ray Microscopy Study of Cubic and Orthorhombic C₃A and Their Hydration Products in the Presence of Gypsum

This paper shows the microstructural differences and phase characterization of pure phases and hydrated products of the cubic and orthorhombic (Na-doped) polymorphs of tricalcium aluminate (C₃A), which are commonly found in traditional Portland cements. Pure, anhydrous samples were characterized using scanning transmission X-ray microscopy (STXM), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) and demonstrated differences in the chemical and mineralogical composition as well as the morphology on a micro/nano-scale. C₃A/gypsum blends with mass ratios of 0.2 and 1.9 were hydrated using a water/C₃A ratio of 1.2, and the products obtained after three days were assessed using STXM. The hydration process and subsequent formation of calcium sulfate in the C₃A/gypsum systems were identified through the changes in the LIII edge fine structure for Calcium. The results also show greater Ca LII binding energies between hydrated samples with different gypsum contents. Conversely, the hydrated samples from the cubic and orthorhombic C₃A at the same amount of gypsum exhibited strong morphological differences but similar chemical environments.

S-Fertilizer (Elemental Sulfur) Improves the Phytoextraction of Cadmium through Solanum nigrum L

Soil contamination with toxic heavy metals [such as cadmium (Cd)] is becoming a serious global problem due to the rapid development of the social economy. This study was carried out to assess the beneficial role of two different kinds of (S)-fertilizer in the phytoremediation of Cd contaminated soil through Solanum nigrum L. Gypsum (Gyp) and Elemental sulfur (ES) was applied alone and in combination with different ratios (0, 100:0, 0:100, 50:50 mg kg^-1) accompanied by different Cd levels (0, 25, 50 mg kg^-1). After seventy days of sowing, plants were harvested for determination of growth, physiological characteristics, oxidants and antioxidants, along with Cd uptake from different parts of the plant. Cd toxicity significantly inhibited growth, physiology and plant defence systems, and also increased Cd uptake in the roots and shoots of Solanum nigrum L. The application of Gyp 100 mg kg^-1 boosted plant growth and physiology along with oxidants and antioxidants activity as compared to ES 100 mg kg^-1 alone, and combine application of GYP+ES 50 + 50 mg kg^-1. The application of ES 100 mg kg^-1 showed an effective approach to decreasing Cd uptake as compared to Gyp 100 mg kg^-1. Overall results showed that the combined application of GYP+ES 50 + 50 mg kg^-1 significantly enhanced the phytoremediation potential of S. nigrum in Cd contaminated soil. Thus, it is highly recommended to apply the combined application of GYP+ES for phytoremediation of Cd contaminated soil.

Construction of the Gypsum-Coated Scaffolds for In Situ Bone Regeneration

It is significant to use functional biomaterials to rationally engineer microenvironments for in situ bone regeneration in the field of bone tissue engineering. To this end, we constructed the gypsum-coated β-tricalcium phosphate (G-TCP) scaffolds by combing a three-dimensional printing technique and an epitaxial gypsum growth method. In vitro simulation experiments showed that the as-prepared scaffolds could establish a dynamic and weakly acidic microenvironment in a simulated body liquid, in which the pH and the calcium ion concentration always changed due to the gypsum degradation and growth of bone-like apatite nanoplates on the scaffold surfaces. The cell experiments confirmed that the microenvironment established by the G-TCP surfaces promoted rapid osteogenic differentiation and proliferation of bone marrow mesenchymal stem cells (BM-MSCs). In vivo experiments confirmed that the G-TCP scaffolds had high bioactivity in modulating in situ regeneration of bone, and the bioactivity of the G-TCP scaffolds was endowed by correct pore structures, degradation of gypsum, and growth of a bone-like apatite layer. The microenvironment established by the gypsum degradation could stimulate tissue inflammation and recruit white blood cells and BM-MSCs and thus accelerating native healing cascades of the bone defects via a bone growth/remodeling-absorption cycle process. Furthermore, in vivo experiments demonstrated that after the bone defects had healed completely, the as-prepared scaffolds also degraded completely within 24 weeks.

Printability and Setting Time of CSA Cement with Na2SiO3 and Gypsum for Binder Jetting 3D Printing

The purpose of this study is to optimize the composition of CSA (calcium sulfoaluminate) cement with sodium silicate (Na₂SiO₃) and gypsum for binder jetting 3D printing. The preliminary test was carried out with an applicator to decide the proper thickness of one layer before using the 3D printer. A liquid binder was then selected to maintain the shape of the particles. Based on the results, the optimal mixture of dry materials and a liquid activator was derived through various parametric studies. For dry materials, the optimum composition of CSA cement, gypsum, and sand was suggested, and the liquid activator made with sodium silicate solution and VMA (viscosity modified agent) were selected. The setting time with gypsum and sodium silicate was controlled within 30 s. In case of the delayed setting time and the rapid setting mixture, the jetting line was printed thicker or thinner and the accuracy of the printout was degraded. In order to adjust the viscosity of the liquid activator, 10% of the VMA was used in 35% of sodium silicate solution and the viscosity of 200-400 cP was suitable to be sprayed from the nozzle. With this optimal mixture, a prototype of atypical decorative wall was printed, and the compressive strength was measured at about 7 MPa.

Bud morphology and shoot growth dynamics in two species of Mediterranean sub-shrubs co-existing in gypsum outcrops

BACKGROUND AND AIMS

Understanding the effects of the environment on the morphology and shoot growth activities of plants is crucial to identifying plant ecological strategies. This study analysed the bud morphology, bud activity, shoot growth dynamics and shoot water content at full hydration (WC(h)) of two species of Mediterranean sub-shrubs, Lepidium subulatum and Linum suffruticosum, co-existing in gypsum outcrops in north-east Spain.

METHODS

Sampling was conducted monthly over 2 years in one population per species. Buds were dissected under a stereo-microscope. Shoot growth was measured as the mean increase in shoot length of 15 marked individuals between two consecutive samplings. Bud activity was studied following the variations in the number of leaf primordia shorter than 1 mm and longer than 0.025 mm in the buds.

KEY RESULTS

Both species bore naked buds and displayed discontinuous seasonal patterns of shoot growth, leaf primordia formation and WC(h). The number of leaf primordia in the bud peaked before the beginning of shoot expansion. In both species, organogenesis and expansion were uncoupled throughout the year. The time lapse between these two processes varied throughout the year, and was greatest for those elements differentiated in autumn. WC(h) was more closely related to shoot expansion than to organogenesis.

CONCLUSIONS

Both species displayed similar bud morphology and similar seasonal patterns of bud and shoot growth, and WC(h) as a result of the strong seasonality of the Mediterranean climate in gypsum outcrops. The beginning of the spring period of expansion of long branches coincided with maximum values of WC(h), while the rest period of summer matched minimum values. These results support the hypothesis that the growth of long branches is strongly related to WC(h).

Distribution behavior of arsenate into α-calcium sulfate hemihydrate transformed from gypsum in solution

Transforming gypsum into α-calcium sulfate hemihydrate (α-HH) provides a promising utilization pathway for the abundant amount of chemical gypsum. The transformation follows the route of "dissolution-recrystallization", during which the arsenic pollutant in gypsum is released into the solution, and hence raises the possibility of being distributed into the product of α-HH, a potential harm that has always been neglected. Investigation of the transformation process at neutral pH revealed that the arsenate ions in solution were distributed into α-HH and generated an enrichment of arsenic by 4-6 times. Arsenate ions distributed into α-HH by substitution for lattice sulfate, adsorption on α-HH facets and occupation for surface sulfate sites. While at higher concentrations, calcium arsenate coprecipitated with α-HH or even crystallized independently. Increasing temperature accelerated the phase transformation and restrained arsenate migration into α-HH due to the lag of distribution balance. The pH of solution modulated the dominant arsenate species and decreasing pH weakened arsenate substitution capacity for sulfate in α-HH. This work uncovers arsenate distribution mechanism during the transformation of gypsum into α-HH and provides a feasible method to restrain arsenate distribution into product, which helps to understand arsenate behavior in hydrothermal solution with high concentration of sulfate minerals and provides a guidance for controlling pollutants distribution into product.

A kinetic and mechanistic study into the transformation of calcium sulfate hemihydrate to dihydrate

The conversion of CaSO4·0.5H2O to CaSO4·2H2O is of great importance industrially, being the reaction behind plasterboard production and the setting of medical plasters. A detailed kinetic and mechanistic study of this process was conducted using time-resolved synchrotron X-ray diffraction in this work. The CaSO4·2H2O product is very similar regardless of whether the α- or β-form of CaSO4·0.5H2O is used as the starting material, but the reaction process is very different. The induction time is usually shorter for α-CaSO4·0.5H2O than β-CaSO4·0.5H2O, and a greater conversion percentage is observed with the former (although in neither case does the reaction proceed to 100% completion). The temperature of the system, widely used in industry as an indirect measure of the extent of the hydration process, is found to be a poor proxy for this, with the maximum temperature reached well before the reaction is complete. The Avrami-Erofe'ev and Gualtieri models could both be fitted to the experimental data, with the fits being substantially closer in the case of α-CaSO4·0.5H2O. The rate of reaction in the Avrami model tends to increase with the amount of gypsum seeds added to accelerate the process, and the importance of nucleation declines. The Gualtieri analysis suggested that the rate of nucleation increases substantially with the amount of seeds added, while there are less distinct changes in the rate of crystal growth. At low seed concentrations (<0.5% w/w) the rate of crystal growth is greater than the rate of nucleation, but at concentrations above 0.5% w/w nucleation is faster. These findings represent the first synchrotron study of the conversion of CaSO4·0.5H2O to CaSO4·2H2O, and will be of importance to gypsum producers globally.

Alfalfa Responses to Gypsum Application Measured Using Undisturbed Soil Columns

Gypsum is an excellent source of Ca and S, both of which are required for crop growth. Large amounts of by-product gypsum [Flue gas desulfurization gypsum-(FGDG)] are produced from coal combustion in the United States, but only 4% is used for agricultural purposes. The objective of this study was to evaluate the effects of (1) untreated, (2) short-term (4-year annual applications of gypsum totaling 6720 kg ha^-1), and (3) long-term (12-year annual applications of gypsum totaling 20,200 kg ha^-1) on alfalfa (Medicago sativa L.) growth and nutrient uptake, and gypsum movement through soil. The study was conducted in a greenhouse using undisturbed soil columns of two non-sodic soils (Celina silt loam and Brookston loam). Aboveground growth of alfalfa was not affected by gypsum treatments when compared with untreated (p > 0.05). Total root biomass (0-75 cm) for both soils series was significantly increased by gypsum application (p = 0.04), however, increased root growth was restricted to 0-10 cm depth. Soil and plant analyses indicated no unfavorable environmental impact from of the 4-year and 12-year annual application of FGDG. We concluded that under sufficient water supply, by-product gypsum is a viable source of Ca and S for land application that might benefit alfalfa root growth, but has less effect on aboveground alfalfa biomass production. Undisturbed soil columns were a useful adaptation of the lysimeter method that allowed detailed measurements of alfalfa nutrient uptake, root biomass, and yield and nutrient movement in soil.

Ephedra sinica Stapf and Gypsum Attenuates Heat-Induced Hypothalamic Inflammation in Mice

Ephedra sinica Stapf (EH) exert toxic effects, such as excitability, cardiac arrhythmia, and others. On the contrary, in traditional herbal medicine, EH and gypsum (GF) are used most often to treat symptoms caused by external stressors. The hypothalamus plays a crucial role in thermal homeostasis. Inflammatory response in the hypothalamus by thermal stressors may affect thermal and energy homeostasis. This study investigates the effect of EH and GF against heat-induced mouse model. Mice were divided into four groups: saline, saline plus heat, EH plus heat, and GF plus heat treated groups. Heat stress was fixed at 43 °C for 15 min once daily for 3 days. Weight and ear and rectal temperature measurements were made after terminating heat stress. Hypothalamus tissue was collected to evaluate the HSP70, nuclear factor kappa-Β (NF-kB), and interleukin (IL)-1β protein expression levels. EH and GF treatment suppressed the increased body temperature. EH significantly ameliorated heat-induced body weight loss, compared to gypsum. Regulatory effects of EH and GF for body temperature and weight against heat stress were mediated by IL-1β reduction. EH showed significant HSP70 and NF-kB inhibition against heat stress. EH and GF contribute to the inhibition of heat-induced proinflammatory factors and the promotion of hypothalamic homeostasis.

Plants on Rich-Magnesium Dolomite Barrens: A Global Phenomenon

For botanists and ecologists, the close link between some plants and substrates, such as serpentine or gypsum, is well known. However, the relationship between dolomite and its flora has been much less studied, due to various causes. Its diffuse separation from limestone and the use of a vague approach and terminology that, until now, no one has tried to harmonize are among these reasons. After carrying out an extensive review, completed with data on the distribution of plants linked to dolomite, the territories in which this type of flora appears at a global level were mapped using a geographic information system software. In addition, data on soils were collected, as well as on their influence on the ionomic profile of the flora. These data were completed with the authors' own information from previous research, which also served to assess these communities' degree of conservation and the genetic diversity of some of their characteristic species. The results showed that the so-called "dolomite phenomenon" is widely represented and is clearly manifested in the appearance of a peculiar flora, very rich in endemisms, on dry soils, poor in nutrients, and with a high Mg level. Although dolomite habitats cause adaptations in plants which are even more recognizable than those of other rock types, they have not been widely studied from an ecological, evolutionary, and conservation point of view because, so far, neither their characteristics nor their universal demarcation have been precisely defined.

Detection of pigments of halophilic endoliths from gypsum: Raman portable instrument and European Space Agency's prototype analysis

A prototype instrument, under development at the University of Leicester, for the future European Space Agency (ESA) ExoMars mission, was used for the analysis of microbial pigments within a stratified gypsum crust from a hypersaline saltern evaporation pond at Eilat (Israel). Additionally, the same samples were analysed using a miniaturized Raman spectrometer, featuring the same 532 nm excitation. The differences in the position of the specific bands, attributed to carotenoid pigments from different coloured layers, were minor when analysed by the ESA prototype instrument; therefore, making it difficult to distinguish among the different pigments. The portable Delta Nu Advantage instrument allowed for the discrimination of microbial carotenoids from the orange/green and purple layers. The purpose of this study was to complement previous laboratory results with new data and experience with portable or handheld Raman systems, even with a dedicated prototype Raman system for the exploration of Mars. The latter is equipped with an excitation wavelength falling within the carotenoid polyene resonance region. The ESA prototype Raman instrument detected the carotenoid pigments (biomarkers) with ease, although further detailed distinctions among them were not achieved.

Differential Precipitation of Mg(OH)2 from CaSO4·2H2O Using Citrate as Inhibitor-A Promising Concept for Reagent Recovery from MgSO4 Waste Streams

In hydrometallurgical processing and acidic wastewater treatment, one of the neutralizing agents employed is MgO or Mg(OH)₂. At the end of this process, the resulting solution, which is rich in SO₄^2- and Mg²⁺ is treated with lime to remove (or minimize the amount) of these ions via the precipitation of Mg(OH)₂ and CaSO₄·2H₂O (gypsum). In our work, an attempt was made to separate the two solids by increasing the induction time of the gypsum precipitation, thus regenerating relatively pure Mg(OH)₂ which could be reused in wastewater treatments or hydrometallurgical processing circuits, and in this way, significantly enhancing the economic viability of the process. During our experiments, the reaction of an MgSO₄ solution with milk of lime prepared from quicklime was studied. The effects of a range of organic additives, which can slow down the precipitation of gypsum have been assessed. The process was optimized for the most promising inhibiting agent-that is, the citrate ion. The reactions were continuously monitored in situ by conductometric measurements with parallel monitoring of solution pH and temperature. ICP-OES measurements were also carried out on samples taken from the reaction slurry. The composition of the precipitating solids at different reaction times was established by powder XRD and their morphology by SEM. Finally, experiments were carried out to locate the additive after the completion of the precipitation reaction to get information about its potential reuse.

Faience Waste for the Production of Wall Products

Increasing the efficiency of using gypsum binders can be carried out by using not natural gypsum raw materials, but calcium sulfate-containing waste from various industries (phosphogypsum, borogypsum, citrogypsum, etc.). As the main source material in the work, we used gypsum-containing waste from a faience factory in the form of waste molds for casting dishes, souvenirs and plumbing fixtures. It has been established that the optimal binding system is formed by mixing powders of dihydrate technogenic gypsum from a coarse and fine earthenware factory with average particle diameters of 3.473 microns and 3.065 microns in a percentage ratio of 30:70, respectively. Using a computer software developed by the authors, which makes it possible to simulate the microstructure of a raw mixture taking into account the contact interaction of particles and calculate the average coordination number, models of binary packing of particles were constructed at various ratios of their diameters. Studies of the strength of composites obtained on the basis of bidisperse systems have shown the presence of an extremum in the region of mixtures containing 30% coarse powder. With optimal packing, a large number of phase contacts are formed due to the regulation of the grain composition of the bidisperse system. It was revealed that a brick based on the waste of two-water gypsum from earthenware production has 2.5–5 times better characteristics of compressive strength than traditional building wall products based on natural gypsum. At the same time, the strength immediately after molding is more than 3 times higher than that of traditional gypsum products. Even higher indicators are achieved when adding microcalcite in addition to the waste of earthenware production, in this case, the compressive strength is 3–6 times higher, and the strength immediately after molding is almost 3 times higher than that of traditional gypsum products.

Study of Fresh and Hardening Process Properties of Gypsum with Three Different PCM Inclusion Methods

Gypsum has two important states (fresh and hardened states), and the addition of phase change materials (PCM) can vary the properties of the material. Many authors have extensively studied properties in the hardened state; however, the variation of fresh state properties due to the addition of Micronal® DS 5001 X PCM into gypsum has been the object of few investigations. Properties in fresh state define the workability, setting time, adherence and shrinkage, and, therefore the possibility of implementing the material in building walls. The aim of the study is to analyze, compare and evaluate the variability of fresh state properties after the inclusion of 10% PCM. PCM are added into a common gypsum matrix by three different methods: adding microencapsulated PCM, making a suspension of PCM/water, and incorporating PCM through a vacuum impregnation method. Results demonstrate that the inclusion of PCM change completely the water required by the gypsum to achieve good workability, especially the formulation containing Micronal® DS 5001 X: the water required is higher, the retraction is lower (50% less) due to the organic nature of the PCM with high elasticity and, the adherence is reduced (up to 45%) due to the difference between the porosity of the different surfaces as well as the surface tension difference.