Short-Wave Infrared Detection and Imaging Employing Size-Customized HgTe Nanocrystals

HgTe nanocrystals (NCs) possess advantages including tunable infrared absorption spectra, solution processability, and low fabrication costs, offering new avenues for the advancement of next-generation infrared detectors. In spite of great synthetic advances, it remains essential to achieve customized synthesis of HgTe NCs in terms of industrial applications. Herein, by taking advantage of a high critical nucleation concentration of HgTe NCs, a continuous-dropwise (CD) synthetic approach that features the addition of the anion precursors in a feasible drop-by-drop fashion is demonstrated. The slow reaction dynamics enable size-customized synthesis of HgTe NCs with sharp band tails and wide absorption range fully covering the short- and mid-infrared regions. More importantly, the intrinsic advantages of CD process ensure high-uniformity and scale-up synthesis from batch to batch without compromising the excitonic features. The resultant HgTe nanocrystal photodetectors show a high room-temperature detectivity of 8.1 × 1011 Jones at 1.7 µm cutoff absorption edge. This CD approach verifies a robust method for controlled synthesis of HgTe NCs and might have important implications for scale-up synthesis of other nanocrystal materials.

Large-Scale Green Synthesis of Magnesium Whitlockite from Environmentally Benign Precursor

Magnesium whitlockite (Mg-WH) powders were synthesized with remarkable efficiency via the dissolution-precipitation method by employing an environmentally benign precursor, gypsum. Under optimized conditions, each 5.00 g of initial gypsum yielded an impressive amount of 3.00 g (89% yield) of Mg-WH in a single batch. Remarkably, no XRD peaks attributable to impurity phases were observed, indicating the single-phase nature of the sample. FT-IR analysis confirmed the presence of the PO43- and HPO42- groups in the obtained Mg-WH phase. The SEM-EDX results confirmed that Mg-WH crystals with homogeneous Ca, Mg, P, and O distributions were obtained. In previously published research papers, the synthesis of Mg-WH has been consistently described as a highly intricate process due to material formation within a narrow pH and temperature range. Our proposed synthesis method is particularly compelling as it eliminates the need for meticulous monitoring, presenting a notable improvement in the quest for a more convenient and efficient Mg-WH synthesis. The proposed procedure not only emphasizes the effectiveness of the process, but also highlights its potential to meet significant demands, providing a reliable solution for large-scale production needs in various promising applications.

Mass production of morin-stabilized silver nanoparticles: Characterization, antioxidant, and antimicrobial activities

Phytochemical-conjugated silver nanoparticles (AgNPs) are believed to act as a bridge between nanotechnology and therapy. There is a significant need for green and mass production of such materials due to their extensive applications, especially in the biomedical sector. In this study, morin-stabilized silver nanoparticles (morin/AgNPs) were synthesized on a massive scale using a one-pot solid-state technique. The reaction is achieved by ball milling of morin and silver nitrate powders at ambient temperature without any solvent or toxic reagent. The prepared morin/AgNPs exhibited a semi-hexagonal shape and ranged in size from 21 to 43 nm. The x-ray diffraction results elucidated the formation of highly crystalline AgNPs. Fourier transform infrared and x-ray photoelectron spectroscopic analyses prove that the hydroxyl, carbonyl, and aromatic functionalities in morin are playing major roles in the reduction and stabilization of AgNPs. The antioxidant potential of morin/AgNPs was evaluated utilizing 2,2-Diphenyl-1-picryl-hydrazyl (DPPH) assay. Morin/AgNPs exhibited better free radical scavenging activity (IC50  = 11.7 μg/mL) than morin (IC50  = 14.8 μg/mL). Furthermore, the synthesized AgNPs showed promising antimicrobial activity against Escherichia coli, Klebsiella pneumonia, Staphylococcus aureus, Streptococcus mutans, and Candida albicans. The largest inhibition zones were observed against S. aureus (21.2 ± 0.6 mm) and K. pneumonia (20.3 ± 0.5 mm) bacteria. The foregoing results highlighted the prospective application of morin/AgNPs as a promising antioxidant and antimicrobial material for safe medical applications. RESEARCH HIGHLIGHTS: A simple green route for the large-scale production of AgNPs was developed. Morin acts as reducing/stabilizing agent in solid-state synthesis of AgNPs. Morin/AgNPs exhibited promising antimicrobial and antioxidant activity.

Pro-aromatic Dihydroquinazolinones - From Multigram Synthesis to Reagents for Gram-scale Metallaphotoredox Reactions

Dihydroquinazolinone (DHQZ) has recently been harnessed as a ketone-derived pro-aromatic reagent extensively employed in (metalla)photoredox reactions as versatile group transfer agents. In this work, we outline a column chromatography-free protocol for the multigram-scale synthesis of pro-aromatic DHQZs as well as its use in a gram-scale nickel/photoredox dual-catalyzed cross-coupling in single-batch, photoflow, and simultaneous multiple smaller batches. While the single-batch approach leveraged moderate yields, a simple plug-flow photoreactor also exhibited amenable productivity (up to 45 % yield) despite the use of a heterogeneous base. Meanwhile, performing the metallaphotoredox-catalyzed reaction in multiple smaller batches in an improvised photoreactor facilitated high yields of up to 59 % and good reproducibility, implying a convenient alternative in the absence of photoflow setups.

Spectro-Microscopic Perceptions into Oxidation Behavior of Large-Scale Molybdenum Disulfide and its Photoelectrical Correlation

Despite the encouraging properties and research of 2D MoS2 , an ongoing issue associated with the oxidative instability remains elusive for practical optoelectronic applications. Thus, in-depth understanding of the oxidation behavior of large-scale and homogeneous 2D MoS2 is imperative. Here the structural and chemical transformations of large-area MoS2 multilayers by air-annealing with altered temperature and time via combinatorial spectro-microscopic analyses (Raman spectroscopy, X-ray photoelectron spectroscopy, and atomic force microscopy) are surveyed. The results gave indications pertaining to temperature- and time-dependent oxidation effects: i) heat-driven elimination of redundant residues, ii) internal strain stimulated by the formation of MoO bonds, iii) deterioration of the MoS2 crystallinity, iv) layer thinning, and v) morphological transformation from 2D MoS2 layers to particles. Photoelectrical characterization of the air-annealed MoS2 is implemented to capture the link between the oxidation behavior of MoS2 multilayers and their photoelectrical properties. The photocurrent based on MoS2 air-annealed at 200 °C is assessed to be 4.92 µA, which is 1.73 times higher than that of pristine MoS2 (2.84 µA). The diminution in the photocurrent of the photodetector based on MoS2 air-annealed above 300 °C in terms of the structural, chemical, and electrical conversions induced by the oxidation process is further discussed.

Room-Temperature, Homogeneous, Single-Step, and Large-Scale Synthesis of Perovskite Nanoplatelets for Blue Light-Emitting Diodes

Inorganic perovskite nanocrystals (IPNCs) have attracted considerable attention due to their excellent optoelectronic properties. However, problems arise from anion migration during the preparation of a blue light-emitting diode (LED), and only small-scale syntheses have been conducted on a laboratory scale. By using only Br as the anion here, CsPbBr3 was synthesized in the form of nanoplatelets to eliminate the effects of anion migration and to prepare an inorganic perovskite nanoplatelet (IPNPL) emitting blue light. In addition, the synthesis was performed under ambient conditions at room temperature, and the synthetic process was shortened to enable large-scale synthesis. We used a 1 L bottle for large-scale synthesis, and a photoluminescence quantum yield (PLQY) of 78% was observed at 460 nm. We fabricated LEDs by using IPNPLs, and we observed an electroluminescence peak at 461 nm. The developed synthetic method is expected to pave the way for commercialization of IPNCs and the next-generation display market.

Large-Scale Synthesis of Tunable Fluorescent Carbon Dots Powder for Light-Emitting Diodes and Fingerprint Identification

The emergence and fast development of carbon dots (CDs) provide an unprecedented opportunity for applications in the field of photoelectricity, but their practicability still suffers from complicated synthesis procedures and the substrate dependence of solid-state fluorescence. In this study, we design a unique microwave-assisted solid-phase synthesis route for preparing tunable fluorescent CD powders with yellow, orange, and red fluorescence (Y-CDs, O-CDs, R-CDs) by simply adjusting the mass ratio of reactants, a method which is suitable for the large-scale synthesis of CDs. The Y-/O-/R-CDs were systematically characterized using physics and spectroscopy techniques. Based on the perfect solid-state fluorescence performance of the proposed fluorescent CD powders, the Y-/O-/R-CDs were successfully applied for the construction of multi-color and white light-emitting diode devices at low cost. Furthermore, the Y-CDs displayed much higher yield and luminous efficiency than the O-CDs and R-CDs and were further used for fingerprint identification on the surfaces of glass sheets and tinfoil. In addition, the R-CD aqueous solution fluorescence is sensitive to pH, suggesting its use as a pH indicator for monitoring intracellular pH fluctuations. The proposed series of fluorescent powders composed of CDs may herald a new era in the application of optical components and criminal investigation fields.

Green, General and Low-cost Synthesis of Porous Organic Polymers in Sub-kilogram Scale for Catalysis and CO2 Capture

Porous organic polymers (POPs) with high porosity and tunable functionalities have been widely studied for use in gas separation, catalysis, energy conversion and energy storage. However, the high cost of organic monomers, and the use of toxic solvents and high temperatures during synthesis pose obstacles for large-scale production. Herein, we report the synthesis of imine and aminal-linked POPs using inexpensive diamine and dialdehyde monomer in green solvents. Theoretical calculations and control experiments show that using meta-diamines is crucial for forming aminal linkages and branching porous networks from [2 + 2] polycondensation reactions. The method demonstrates good generality in that 6 POPs were successfully synthesized from different monomers. Additionally, we scaled up the synthesis in ethanol at room temperature, resulting in the production of POPs in sub-kilogram quantities at a relatively low cost. Proof-of-concept studies demonstrate that the POPs can be used as high-performance sorbents for CO2 separation and as porous substrates for efficient heterogeneous catalysis. This method provides an environmentally friendly and cost-effective approach for large-scale synthesis of various POPs.

Large-Scale Synthesis of Multifunctional Single-Phase Co2 C Nanomaterials

Achieving scalable synthesis of nanoscale transition-metal carbides (TMCs), regarded as substitutes for platinum-group noble metals, remains an ongoing challenge. Herein, a 100-g scale synthesis of single-phased cobalt carbide (Co₂ C) through carburization of Co-based Prussian Blue Analog (Co-PBA) is reported in CO₂ /H₂ atmosphere under mild conditions (230 °C, ambient pressure). Textural property investigations indicate a successful preparation of orthorhombic-phased Co₂ C nanomaterials with Pt-group-like electronic properties. As a demonstration, Co₂ C achieves landmark photo-assisted thermal catalytic CO₂ conversion rates with photo-switched product selectivity, which far exceeds the representative Pt-group-metal-based catalysts. This impressive result is attributed to the excellent activation of reactants, colorific light absorption, and photo-to-thermal conversion capacities. In addition to CO₂ hydrogenation, the versatile Co₂ C materials show huge prospects in antibacterial therapy, interfacial water evaporation, electrochemical hydrogen evolution reaction, and battery technologies. This study paves the way toward unlocking the potential of multi-functional Co₂ C nanomaterials.

Transition Metal Single Atoms Constructed by Using Inherent Confined Space

Single-atom catalysts (SACs) show expressively enhanced activity toward diverse reactions due to maximized atomic utilization of metal sites, while their facile, universal, and massive preparation remains a pronounced challenge. Here we report a facile strategy for the preparation of SACs by use of the inherent confined space between the template and silica walls in template-occupied mesoporous silica SBA-15 (TOS). Different transition metal precursors can be introduced into the confined space readily by grinding, and during succeeding calcination single atoms are constructed in the form of M-O-Si (M = Cu, Co, Ni, and Zn). In addition to the generality, the present strategy is easy to scale up and can allow the synthesis of 10 g of SACs in one pot through ball milling. The Cu SAC has been applied for CO₂ cycloaddition of epichlorohydrin, and the activity is obviously higher than the counterpart prepared without confined space and various reported Cu-containing catalysts.

Synthesis of Efficient and Stable Tetrabutylammonium Copper Halides with Dual Emissions for Warm White Light-Emitting Diodes

In order to achieve a high color-rendering index (CRI) and low correlated color temperature (CCT) indoor lighting, single-component phosphors with broad-band dual emission are in high demand for white-light-emitting diodes (WLEDs). However, phosphors with such fluorescent properties are rare at present. Herein, we report a facile solid-state chemical method for the synthesis of single-component phosphor with broad-band emission and a large Stokes shift that can meet the requirements of future white-light sources. These new tetrabutylammonium copper halides phosphors have excellent warm white emission characteristics, and their luminescence peaks are located at 494 and 654 nm. The optimized photoluminescence (PL) quantum yield can reach 93.7 %. The typical CIE coordinate of the as-fabricated WLED is at (0.3620, 0.3731) with a CRI of 89 and low CCT of 4516 K.

Controlled Atmosphere Corrosion Engineering toward Inhomogeneous NiFe-LDH for Energetic Oxygen Evolution

The "Fe effect" can maximize the activity of nickel-iron layered double hydroxides (NiFe-LDH) toward oxygen evolution reaction (OER) when the iron content, the lattice distortion, the conductivity, and other related factors are well balanced. It is difficult for the homogeneous NiFe-LDH to take good care of the above requirements at the same time. Herein, we proposed an elaborate atmosphere corrosion strategy to construct porous NiFe-LDH with rich edge/surface-Fe defects on Ni foam (NF). Such edge/surface-Fe defects, mainly caused by the local unequal-stoichiometric ratio of Fe/Ni in the nanometer or subnanometer region, are determined by the unbalanced permeating of the acid vapor and the confined reaction of local Fe and Ni species ionized by the acid vapor. Benefiting from the abundant and fantastic edge/surface-Fe defects, the optimal NiFe-LDH prepared by atmosphere corrosion is more energetic for OER than that synthesized in conventional liquid phase, only a potential of 1.481 and 1.552 V_RHE to respectively achieve the current density of 100 and 1000 mA cm^-2 as well as a satisfactory stability and reproducibility. An overall water-splitting system assembled by inhomogeneous NiFe-LDH and commercial Pt-C can reach a current density of 100 mA cm^-2 at a solar cell of 1.72 V. Additionally, the atmosphere corrosion is very suitable for the large-scale, green, and economic synthesis of metal-based catalysts with high enrichment of defects, highlighting its potential for device and industrial applications.

Rapid, Ordered Polymerization of Crystalline Semiconducting Covalent Triazine Frameworks

The rapid synthesis of crystalline covalent triazine frameworks (CTFs) and exploration of the polymerization mechanism are highly desired for the research of crystalline porous polymers, but have not yet been reported. Herein, we demonstrate a scalable microwave-assisted synthetic strategy to successfully prepare a series of highly crystalline and semiconducting CTFs within 20 minutes for the first time. By in situ imaging and time-dependent characterization, we proposed an ordered two-dimensional (2D) polymerization mechanism for crystalline CTFs, in which the monomers rapidly polymerize into periodic 2D molecular sheets within 10 s and then grow into more ordered framework structures. Photocatalytic study of CTF with different crystallinity revealed that large crystalline domain could significantly improve the photocatalytic performance. Single-layer and few-layer crystalline 2D triazine polymer nanosheets could be obtained through simple ball-milling exfoliation of the bulk layered CTFs and exhibit nearly fivefold improved photocatalytic hydrogen evolution rate up to 7971 μmol g^-1  h^-1 .

Advances in the Synthesis of 2D MXenes

2D transition metal carbides, nitrides, and carbonitrides, also known as MXenes, are versatile materials due to their adjustable structure and rich surface chemistry. The physical and chemical diversity has recognized MXenes as a potential 2D material with a wide spectrum of application domains. Since the discovery of MXenes in 2011, a wide variety of synthetic routes has been proposed with advancement toward large-scale preparing methods for MXene nanosheets and derivative products. Herein, the critical synthesis aspects and the operating conditions that influence the physical and chemical characteristics of MXenes are discussed in detail. The emerging etching methods including HF etching methods, in situ HF-forming etching methods, electrochemical etching methods, alkali etching methods, and molten salt etching methods, as well as delamination strategies are discussed. Considering the future developments and practical applications, the large-scale synthesis routes and the antioxidation strategies of MXenes are also summarized. In summary, a generalized overview of MXenes synthesis protocols with an outlook for the current challenges and promising technologies for large-scale preparation and stable storage is provided.

Single-Crystal Diamond Needle Fabrication Using Hot-Filament Chemical Vapor Deposition

Single-crystal diamonds in the form of micrometer-scale pyramids were produced using a combination of hot-filament (HF) chemical vapor deposition (CVD) and thermal oxidation processes. The diamond pyramids were compared here with similar ones that were manufactured using plasma-enhanced (PE) CVD. The similarities revealed in the morphology, Raman, and photoluminescent characteristics of the needles obtained using the hot-filament and plasma-enhanced CVD are discussed in connection with the diamond film growth mechanism. This work demonstrated that the HF CVD method has convincing potential for the fabrication of single-crystal diamond needles in the form of regularly shaped pyramids on a large surface area, even on non-conducting substrates. The experimental results demonstrated the ability for the mass production of the single-crystal needle-like diamonds, which is important for their practical application.

Reaction of indoles with aromatic fluoromethyl ketones: an efficient synthesis of trifluoromethyl(indolyl)phenylmethanols using K2CO3/n-Bu4PBr in water

A new, mild and efficient protocol for the synthesis of trifluoromethyl(indolyl)phenylmethanols by the reaction of indoles with a variety of aromatic fluoromethyl ketones in the presence of K₂CO₃ (15 mol %) and n-Bu₄PBr (15 mol %) in water. The desired products were obtained in good to excellent yields without requiring a column chromatographic purification. The reusability of the catalytic system and large-scale synthesis of indolyl(phenyl)methanols, which would further transform into biological active indole-derived compounds, are further advantages of this protocol.

Preparative Method for Asymmetric Synthesis of (S)-2-Amino-4,4,4-trifluorobutanoic Acid

Enantiomerically pure derivatives of 2-amino-4,4,4-trifluorobutanoic acid are in great demand as bioisostere of leucine moiety in the drug design. Here, we disclose a method specifically developed for large-scale (>150 g) preparation of the target (S)-N-Fmoc-2-amino-4,4,4-trifluorobutanoic acid. The method employs a recyclable chiral auxiliary to form the corresponding Ni(II) complex with glycine Schiff base, which is alkylated with CF3-CH2-I under basic conditions. The resultant alkylated Ni(II) complex is disassembled to reclaim the chiral auxiliary and 2-amino-4,4,4-trifluorobutanoic acid, which is in situ converted to the N-Fmoc derivative. The whole procedure was reproduced several times for consecutive preparation of over 300 g of the target (S)-N-Fmoc-2-amino-4,4,4-trifluorobutanoic acid.

Large-Scale Synthesis of Three-Dimensional Reduced Graphene Oxide/Nitrogen-Doped Carbon Nanotube Heteronanostructures as Highly Efficient Electromagnetic Wave Absorbing Materials

Herein, we use reduced graphene oxide as a substrate and NiFe as a catalyst to fabricate three-dimensional (3D) nitrogen-doped carbon nanotube (NCNT)/reduced graphene oxide heteronanostructures (3D NiFe/N-GCTs). The 3D NiFe/N-GCTs are composed of two-dimensional (2D) reduced graphene oxide-supported one-dimensional (1D) NiFe nanoparticle-encapsulated NCNT arrays. The NCNTs exhibit bamboo-like shapes with the length and diameter of 3-10 μm and 15-45 nm, respectively. Besides integration of advantages of 1D and 2D nanomaterials, the 3D NiFe/N-GCT heteronanostructure possesses interconnected network structures, sufficient interfaces, numerous defects, hundreds of void spaces enclosed by bamboo joints and the walls of the NCNT in an individual carbon nanotube, and large surface areas, which can improve their dielectric losses toward electromagnetic wave. Thus, the 3D NiFe/N-GCTs show satisfied property toward electromagnetic wave absorption. Typically, the optimized 3D NiFe/N-GCT displays excellent minimal reflection loss (-40.3 dB) and outstanding efficient absorption bandwidth (4.5 GHz), outperforming most of the reported absorbers. Remarkably, the synthesis of 3D NiFe/N-GCTs only involves vacuum freeze-drying and subsequent thermal treatment process at a high temperature, and thus, the large-scale production of 3D NiFe/N-GCTs can be achieved in each batch, affording the possibility of the practical applications of the 3D NiFe/N-GCTs.

Large-Scale Asymmetric Synthesis of Fmoc-(S)-2-Amino-6,6,6-Trifluorohexanoic Acid

Here we report the first large-scale synthesis of Fmoc-(S)-2-amino-6,6,6-trifluorohexanoic acid via asymmetric alkylation of chiral Ni(II)-complex of glycine Schiff base with CF3(CH2)3I. The synthesis was performed on over 100 g scale and can be recommended as the most advanced procedure for reliable preparation of large amounts of enantiomerically pure Fmoc-(S)-2-amino-6,6,6-trifluorohexanoic acid for protein engineering and drug design. Chiral auxiliary used in this protocol can be >90 % recovered and reused.

Core-Shell NaHoF4@TiO2 NPs: A Labeling Method to Trace Engineered Nanomaterials of Ubiquitous Elements in the Environment

Understanding the fate and behavior of nanoparticles (NPs) in the natural environment is important to assess their potential risk. Single particle inductively coupled plasma mass spectrometry (spICP-MS) allows for the detection of NPs at extremely low concentrations, but the high natural background of the constituents of many of the most widely utilized nanoscale materials makes accurate quantification of engineered particles challenging. Chemical doping, with a less naturally abundant element, is one approach to address this; however, certain materials with high natural abundance, such as TiO₂ NPs, are notoriously difficult to label and differentiate from natural NPs. Using the low abundance rare earth element Ho as a marker, Ho-bearing core -TiO₂ shell (NaHoF₄@TiO₂) NPs were designed to enable the quantification of engineered TiO₂ NPs in real environmental samples. The NaHoF₄@TiO₂ NPs were synthesized on a large scale (gram), at relatively low temperatures, using a sacrificial Al(OH)₃ template that confines the hydrolysis of TiF₄ within the space surrounding the NaHoF₄ NPs. The resulting NPs consist of a 60 nm NaHoF₄ core and a 5 nm anatase TiO₂ shell, as determined by TEM, STEM-EDX mapping, and spICP-MS. The NPs exhibit excellent detectability by spICP-MS at extremely low concentrations (down to 1 × 10^-3 ng/L) even in complex natural environments with high Ti background.

Liquid-Phase Oligonucleotide Synthesis: Past, Present, and Future Predictions

Therapeutic oligonucleotides have emerged as a powerful paradigm with the ability to treat a wide range of the human diseases. As a result, we have witnessed more than one hundred oligonucleotides currently in active clinical trials and eight Food and Drug Administration (FDA)-approved drugs. Until now, the demand for oligonucleotide-based drugs has been fulfilled by conventional solid-phase synthesis in an effective manner. However, there are products in advanced stages of clinical trials projecting a collective demand of metric ton quantities in the near future. Therefore, large-scale manufacturing of these products has become a high priority for process chemists. This article summarizes the advances in liquid-phase oligonucleotide synthesis (LPOS) as a possible alternative strategy to meet the scale-up challenge. A review of the literature describing major efforts in developing LPOS technologies is presented. Gratifyingly, serious attempts are under way to develop an efficient environmentally benign green chemistry protocol that is scalable and cost effective for the manufacturing of oligonucleotides. A summary of the most innovative LPOS protocols has been included to provide a glimpse of what may be possible in the future for large-scale production of oligonucleotides. © 2019 by John Wiley & Sons, Inc.

Large-Scale Synthesis and Medical Applications of Uniform-Sized Metal Oxide Nanoparticles

Thanks to recent advances in the synthesis of high-quality inorganic nanoparticles, more and more types of nanoparticles are becoming available for medical applications. Especially, metal oxide nanoparticles have drawn much attention due to their unique physicochemical properties and relatively inexpensive production costs. To further promote the development and clinical translation of these nanoparticle-based agents, however, it is highly desirable to reduce unwanted interbatch variations of the nanoparticles because characterizing and refining each batch are costly, take a lot of effort, and, thus, are not productive. Large-scale synthesis is a straightforward and economic pathway to minimize this issue. Here, the recent achievements in the large-scale synthesis of uniform-sized metal oxide nanoparticles and their biomedical applications are summarized, with a focus on nanoparticles of transition metal oxides and lanthanide oxides, and clarifying the underlying mechanism for the synthesis of uniform-sized nanoparticles. Surface modification steps to endow hydrophobic nanoparticles with water dispersibility and biocompatibility are also briefly described. Finally, various medical applications of metal oxide nanoparticles, such as bioimaging, drug delivery, and therapy, are presented.

Large-Scale Synthesis, Crystal Structure, and Optical Properties of the Ag146Br2(SR)80 Nanocluster

Solving the atomic structure of large-sized metal nanoclusters is a highly challenging task yet critically important for understanding the properties and developing applications. Herein, we report a stable silver nanocluster-Ag₁₄₆Br₂(SR)₈₀ (where SR = 4-isopropylbenzenethiolate)-with its structure solved by X-ray crystallography. Gram-scale synthesis with high yield has been achieved by a one-pot reaction, which offers opportunities for functionalization and applications. This silver nanocluster possesses a core-shell structure with a Ag₅₁ core surrounded by a shell of Ag₉₅Br₂S₈₀. The Ag₅₁ core can be viewed as a distorted decahedron, endowing this nanocluster with quantized electronic transitions. In the surface-protecting layer, five different types of S-Ag coordination modes are observed, ranging from the linear Ag-S-Ag to S-Ag₃ (triangle) and S-Ag₄ (square). Furthermore, temperature-dependent optical absorption and ultrafast electron dynamics are conducted to explore the relationship between the properties and structure, demonstrating that the distorted metal core and "flying saucer"-like shape of this nanocluster have significant effects on the electronic behavior. A comparison with multiple sizes of Ag nanoclusters also provides some insights into the evolution from molecular to metallic behavior.

Large-Scale Synthesis of Colloidal Si Nanocrystals and Their Helium Plasma Processing into Spin-On, Carbon-Free Nanocrystalline Si Films

This paper describes a simple approach to the large-scale synthesis of colloidal Si nanocrystals and their processing into spin-on carbon-free nanocrystalline Si films. The synthesized silicon nanoparticles are capped with decene, dispersed in hexane, and deposited on silicon substrates. The deposited films are exposed to nonoxidizing room-temperature He plasma to remove the organic ligands without adversely affecting the silicon nanoparticles to form crack-free thin films. We further show that the reactive ion etching rate in these films is 1.87 times faster than that for single-crystalline Si, consistent with a simple geometric argument that accounts for the nanoscale roughness caused by the nanoparticle shape.

Earthworms as a Biocatalyst: In Asymmetric Aldol Reactions

A crude extract from earthworms was used as an environmentally friendly and easily accessible biocatalyst for asymmetric direct aldol reactions. The β-hydroxy carbonyl compounds could be prepared in yields of up to 94%, with ee values of up to 98% and dr of up to >99:1. A wide range of substrates could participate in the reaction. This earthworm catalyst was also efficient in the large-scale reaction, providing product in excellent yield and good selectivity. The protocol as an example gives inspiration for the development of sustainable catalysts from nature, which also provides a potential possibility for application of earthworm catalyst in industrial production.

Large-scale synthesis of highly emissive and photostable CuInS2/ZnS nanocrystals through hybrid flow reactor

We report a high-yield, low-cost synthesis route to colloidal CuInS2/ZnS (CIS/ZnS) nanocrystals (NCs) with Cu vacancies in the crystal lattice. Yellow-emitting CIS/ZnS core/shell NCs of high luminescence were facilely synthesized via a stepwise, consecutive hybrid flow reactor approach. It is based on serial combination of a batch-type mixer and a flow-type furnace. In this reactor, the flow rate of the solutions was typically 1 mL/min, 100 times larger than that of conventional microfluidic reactors. This method can produce gram quantities of material with a chemical yield in excess of 90% with minimal solvent waste. This is a noninjection-based approach in 1-dodecanethiol (DDT) with excellent synthetic reproducibility and large-scale capability. The optical features and structure of the obtained CIS/ZnS NCs have been characterized by UV-vis and fluorescence spectroscopies, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDX) and high-resolution transmission electron microscopy (HRTEM). The resulting CIS/ZnS NCs in chloroform exhibit quantum yield (QY) of 61.4% with photoemission peaking at 561 nm and full width at half maximum (FWHM) of 92 nm. The as-synthesized CIS/ZnS NCs were proven to have excellent photostability. The synthesized CIS/ZnS NCs can be a promising fluorescent probe for biological imaging and color converting material for light-emitting diode due to Cd-free constituents.