Plasma-Treated Solutions (PTS) in Cancer Therapy

Simple Summary

Cold physical plasma is a partially ionized gas generating various reactive oxygen and nitrogen species (ROS/RNS) simultaneously. ROS/RNS have therapeutic effects when applied to cells and tissues either directly from the plasma or via exposure to solutions that have been treated beforehand using plasma processes. This review addresses the challenges and opportunities of plasma-treated solutions (PTSs) for cancer treatment.

Abstract

Cold physical plasma is a partially ionized gas generating various reactive oxygen and nitrogen species (ROS/RNS) simultaneously. ROS/RNS have therapeutic effects when applied to cells and tissues either directly from the plasma or via exposure to solutions that have been treated beforehand using plasma processes. This review addresses the challenges and opportunities of plasma-treated solutions (PTSs) for cancer treatment. These PTSs include plasma-treated cell culture media in experimental research as well as clinically approved solutions such as saline and Ringer’s lactate, which, in principle, already qualify for testing in therapeutic settings. Several types of cancers were found to succumb to the toxic action of PTSs, suggesting a broad mechanism of action based on the tumor-toxic activity of ROS/RNS stored in these solutions. Moreover, it is indicated that the PTS has immuno-stimulatory properties. Two different routes of application are currently envisaged in the clinical setting. One is direct injection into the bulk tumor, and the other is lavage in patients suffering from peritoneal carcinomatosis adjuvant to standard chemotherapy. While many promising results have been achieved so far, several obstacles, such as the standardized generation of large volumes of sterile PTS, remain to be addressed.

Low-temperature Plasma Promotes Fibroblast Proliferation in Wound Healing by ROS-activated NF-κB Signaling Pathway

Low-temperature plasma (LTP) has shown great promise in wound healing, although the underlying mechanism remains poorly understood. In the present study, an argon atmospheric pressure plasma jet was employed to treat L929 murine fibroblasts cultured in vitro and skin wounds in BALB/c mice. The in vitro analysis revealed that treatment of fibroblasts with LTP for 15 s resulted in a significant increase in cell proliferation, secretion of epidermal growth factor (EGF) and transforming growth factor-βi (TGF-βi), production of intracellular reactive oxygen species (ROS), and the percentage of cells in S phase, protein expression of phosphorylated p65 (P-p65) and cyclinD1, but a noted decrease in the protein expression of inhibitor kappa B (IκB). The in vitro experiments demonstrated that 30-s LTP treatment enhanced the number of fibroblasts and the ability of collagen synthesis, while 50-s treatment led to the opposite outcomes. These results suggested that LTP treatment promotes the fibroblast proliferation in wound healing by inducing the generation of ROS, upregulating the expression of P-p65, downregulating the expression of IκB, and activating the NF-κB signaling pathway and consequently altering cell cycle progression (increased DNA synthesis in S phage).

Physiological and transcriptional response of Bacillus cereus treated with low-temperature nitrogen gas plasma

AIMS

This study was conducted to investigate the inactivation kinetics of Bacillus cereus vegetative cells upon exposure to low-temperature nitrogen gas plasma and to reveal the mode of inactivation by transcriptome profiling.

METHODS AND RESULTS

Exponentially growing B. cereus cells were filtered and put on agar plates. The plates, carrying the filters with the vegetative cells, were placed into low-temperature nitrogen gas plasma at atmospheric pressure. After different exposure times, the cells were harvested for RNA extraction and enumeration. The RNA was used to perform whole-transcriptome profiling using DNA microarrays. The transcriptome profile showed a large overlap with profiles obtained from conditions generating reactive oxygen species in B. cereus. However, excess radicals such as peroxynitrite, hydroxyl and superoxide could not be detected using radical-specific fluorescence staining. Lack of UV-specific responses including factors involved in DNA damage repair is in line with the absence of UV-specific emission in the afterglow of the nitrogen gas plasma as analysed using optical emission spectroscopy (OES).

CONCLUSIONS

Antibacterial activity of nitrogen gas plasma is not based on UV radiation. Exposure to nitrogen gas plasma leads to oxidative stress and inactivation of targeted cells. A secondary oxidative stress with the indicative formation of reactive oxygen species within cells could not be observed.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study represents the first investigation of differential gene expression on a genome-wide scale in B. cereus following nitrogen gas plasma exposure. This study may help to design economically feasible, safe and effective plasma decontamination devices.

Chitin and Cellulose Processing in Low-Temperature Electron Beam Plasma

Polysaccharide processing by means of low-temperature Electron Beam Plasma (EBP) is a promising alternative to the time-consuming and environmentally hazardous chemical hydrolysis in oligosaccharide production. The present paper considers mechanisms of the EBP-stimulated destruction of crab shell chitin, cellulose sulfate, and microcrystalline cellulose, as well as characterization of the produced oligosaccharides. The polysaccharide powders were treated in oxygen EBP for 1–20 min at 40 °C in a mixing reactor placed in the zone of the EBP generation. The chemical structure and molecular mass of the oligosaccharides were analyzed by size exclusion and the reversed phase chromatography, FTIR-spectroscopy, XRD-, and NMR-techniques. The EBP action on original polysaccharides reduces their crystallinity index and polymerization degree. Water-soluble products with lower molecular weight chitooligosaccharides (weight-average molecular mass, M_w = 1000–2000 Da and polydispersity index 2.2) and cellulose oligosaccharides with polymerization degrees 3–10 were obtained. The ¹H-NMR analysis revealed 25–40% deacetylation of the EBP-treated chitin and FTIR-spectroscopy detected an increase of carbonyl- and carboxyl-groups in the oligosaccharides produced. Possible reactions of β-1,4-glycosidic bonds’ destruction due to active oxygen species and high-energy electrons are given.

Plasma Activation of Copper Nanowires Arrays for Electrocatalytic Sensing of Nitrate in Food and Water

Electrochemical methods for nitrate detection are very attractive since they are suitable for in-field and decentralized monitoring. Copper electrodes are often used to this aim as this metal presents interesting electrocatalytic properties towards nitrate reduction. In this research, we study improvements in the electrochemical analysis of nitrate in natural water and food by taking advantage of the detection capabilities of ensembles of copper nanowire electrodes (CuWNEEs). These electrodes are prepared via template electrodeposition of copper within the nanopores of track-etched polycarbonate (PC) membranes. A critical step in the preparation of these sensors is the removal of the template. Here, we applied the combination of chemical etching with atmospheric plasma cleaning which proved suitable for improving the performance of the nanostructured copper electrode. Analytical results obtained with the CuWNEE sensor for nitrate analyses in river water samples compare satisfactorily with those achieved by standard chromatographic or spectroscopic methods. Experimental results concerning the application of the CuWNEEs for nitrate analysis in food samples are also presented and discussed, with focus on nitrate detection in leafy vegetables.

Cancer treatments using low-temperature plasma

Low-temperature plasma (LTP) is a partially ionized gas that contains electrons, ions, radicals, light, etc. Recently, the bio-medical application of LTP has become a hot topic in plasma science and biological science. Cancer treatment with plasma is the most challenging topic in plasma bio-medical applications. Many in vitro and in vivo experiments have been conducted to investigate the anti-tumor effects of LTP. Extracellular reactive oxygen and nitrogen species (RONS) in plasma-activated solutions are key factors for the anti-tumor effects, and amino acid modifications by LTP may affect cellular responses. Intracellular RONS are also key factors for the anti-tumor effects. Various signaling pathways such as p53 signaling pathways, survival and proliferation signaling pathways, and oxidative stress-dependent signaling pathways are activated by LTP.

Experimental Characterization of Polymer Surfaces Subject to Corona Discharges in Controlled Atmospheres

Polymeric dielectrics are employed extensively in the power transmission industry, thanks to their excellent properties; however, under normal operating conditions these materials tend to degrade and fail. In this study, samples of low-density polyethylene, polypropylene, polymethyl methacrylate, and polytetrafluorethylene were subjected to corona discharges under nitrogen and air atmospheres. The discharges introduced structural modifications over the polymer surface. From a chemical perspective, the alterations are analogous among the non-fluorinated polymers (i.e., polyethylene (PE), polypropylene (PP), and polymethyl methacrylate (PMMA)). A simulation of the corona discharge allowed the identification of highly reactive species in the proximity of the surface. The results are consistent with the degradation of insulating polymers in high-voltage applications due to internal partial discharges that ultimately lead to the breakdown of the material.

Effect of Combining Low Temperature Plasma, Negative Pressure Wound Therapy, and Bone Marrow Mesenchymal Stem Cells on an Acute Skin Wound Healing Mouse Model

Low-temperature plasma (LTP; 3 min/day), negative pressure wound therapy (NPWT; 4 h/day), and bone marrow mesenchymal stem cells (MSCs; 1×106 cells/day) were used as mono- and combination therapy in an acute excisional skin wound-healing ICR mouse model. These therapies have been beneficial in treating wounds. We investigated the effectiveness of monotherapy with LTP, NPWT, and MSC and combination therapy with LTP + MSC, LTP + NPWT, NPWT + MSC, and LTP + NPWT + MSC on skin wounds in mice for seven consecutive days. Gene expression, protein expression, and epithelial thickness were analyzed using real time polymerase chain reaction (RT-qPCR), western blotting, and hematoxylin and eosin staining (H&E), respectively. Wound closure was also evaluated. Wound closure was significantly accelerated in monotherapy groups, whereas more accelerated in combination therapy groups. Tumor necrosis factor-α (TNF-α) expression was increased in the LTP monotherapy group but decreased in the NPWT, MSC, and combination therapy groups. Expressions of vascular endothelial growth factor (VEGF), α-smooth muscle actin (α-SMA), and type I collagen were increased in the combination therapy groups. Re-epithelialization was also considerably accelerated in combination therapy groups. Our findings suggest that combination therapy with LPT, NPWT, and MSC exert a synergistic effect on wound healing, representing a promising strategy for the treatment of acute wounds.

Physico-Chemical Surface Modifications of Polyetheretherketone (PEEK) Using Extreme Ultraviolet (EUV) Radiation and EUV-Induced Nitrogen Plasma

In this work, the effect of extreme ultraviolet (EUV) radiation and the combination of EUV radiation and low-temperature nitrogen plasma on the physico-chemical properties of polyetheretherketone (PEEK) surfaces were presented. The laser-plasma EUV source based on a double gas puff target was used in this experiment to irradiate PEEK surfaces with nanosecond pulses of EUV radiation and to produce low-temperature plasma through the photoionization of nitrogen with EUV photons. The changes in surface morphology on irradiated polymer samples were examined using atomic force microscopy (AFM) and scanning electron microscopy (SEM). Chemical changes of the PEEK surfaces were analysed using X-ray photoelectron spectroscopy (XPS). EUV radiation and nitrogen plasma treatment caused significant changes in the topography of modified PEEK’s surfaces and an increase in their average roughness. Strong chemical decomposition, appearance of new functional groups as well as incorporation of nitrogen atoms up to ~17 at.% on the PEEK’s surface were observed.

Multi-Hollow Surface Dielectric Barrier Discharge for Bacterial Biofilm Decontamination

The plasma-activated gas is capable of decontaminating surfaces of different materials in remote distances. The effect of plasma-activated water vapor on Staphylococcus epidermidis, methicillin-resistant Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli biofilm contamination was investigated on the polypropylene nonwoven textile surface. The robust and technically simple multi-hollow surface dielectric barrier discharge was used as a low-temperature atmospheric plasma source to activate the water-based medium. The germicidal efficiency of short and long-time exposure to plasma-activated water vapor was evaluated by standard microbiological cultivation and fluorescence analysis using a fluorescence multiwell plate reader. The test was repeated in different distances of the contaminated polypropylene nonwoven sample from the surface of the plasma source. The detection of reactive species in plasma-activated gas flow and condensed activated vapor, and thermal and electrical properties of the used plasma source, were measured. The bacterial biofilm decontamination efficiency increased with the exposure time and the plasma source power input. The log reduction of viable biofilm units decreased with the increasing distance from the dielectric surface.

Low-Temperature Plasma Suppresses Proliferation and Induces Apoptosis in Lung Cancer Cells by Regulating the miR-203a/BIRC5 Axis

Aim

Low-temperature plasma (LTP) has potential applications in cancer therapy. Herein, we explored the molecular mechanisms of proliferation inhibition induced by LTP.

Methods

LTP was generated by a helium atmospheric-pressure plasma jet and used to treat A549 and H1299 cells. CCK-8 and cell apoptosis assays were performed to evaluate the effects of LTP treatment on A549 and H1299 cells. The qRT-PCR was performed to measure the expression of miR-203a after treating with LTP. CCK-8, colony formation, cell apoptosis assays, and Western blotting were performed to analyse the function of miR-203a in the development of lung cancer. Dual-luciferase assay and Western blotting were used to probe the relationship between miR-203a and BIRC5, and gene silencing using si-BIRC5 was carried out to explore the effect of knocking down BIRC5 on lung cancer cells.

Results

We found that LTP significantly suppressed proliferation and promoted apoptosis in A549 and H1299 cells. The miR-203a expression was increased after cells were treated with LTP. The miR-203a expression was downregulated among lung cancer tissue samples, and overexpression of miR-203a suppressed cell growth and induced apoptosis in lung cancer cells. We showed that miR-203a targeted BIRC5. Moreover, silencing of BIRC5 caused proliferation inhibition and induced apoptosis in lung cancer cells.

Conclusion

Our study revealed that LTP inhibited proliferation and induced apoptosis in A549 and H1299 cells through the miR-203a/BIRC5 axis. These findings showed that LTP could potentially be used to treat lung cancer.

The effects of tonsillectomy by low-temperature plasma on the growth development and psychological behavior in children with obstructive sleep apnea hypopnea syndrome

We investigated the effects of tonsillectomy by low-temperature plasma on the growth development and psychological behavior in children with obstructive sleep apnea hypopnea syndrome (OSAHS).This study included 72 moderate and severe OSAHS children with tonsils or adenoids hypertrophy, which were randomly assigned into either the study group (n = 36) or the control group (n = 36). Patients in study group underwent tonsillectomy by low-temperature plasma, while in the control group underwent tonsil-pecking, then the efficacy were compared.The time of surgery, VAS scores on postoperative day 1, 3, and 7 were significantly lower in the study group than in the control group, and the efficiency was significantly higher in the study group than the control group (P = .018). In the study group, the BMI was lower, the score of C-WISC (VIQ, PIQ, and FIQ) was higher, the score of CBCL social competence was higher and the score of behavioral questions was lower than that in the control group; differences were statistically significant (P = .022). The serum levels of IgA, IgG, and IgM, as well as the percentage of T lymphocytes, between the study group and the control group were not significantly different (P = .132).Tonsillectomy by low-temperature plasma was effective on the treatment of children with severe OSAHS, and could improve growth development and psychological behavior.

Plasma Exfoliated Graphene: Preparation via Rapid, Mild Thermal Reduction of Graphene Oxide and Application in Lithium Batteries

A simple, novel approach is proposed for the preparation of plasma-exfoliated graphene (PEGN) by reducing graphene oxide (GO) through a dielectric-barrier discharge (DBD) plasma treatment in a H₂ atmosphere. The surface chemistry, microstructures, and crystallinity of the prepared samples were characterized via X-ray photoelectron spectroscopy, transmission electron microscopy, and Raman spectrometry to determine the formation mechanism of the PEGN. The results demonstrated that the prepared PEGN had only a few layers in its structure and that most of the functional groups containing oxygen on the GO surface were removed. The PEGN exhibited a considerably higher capacity, better cycling stability, and favorable electron transfer rate for use as a cathode material for lithium-ion batteries. This proposed approach is fast, convenient, and inexpensive, constituting a novel means of producing graphene.

Effect of Nitrogen Arc Discharge Plasma Treatment on Physicochemical Properties and Biocompatibility of PLA-Based Scaffolds

The effect of low-temperature arc discharge plasma treatment in a nitrogen atmosphere on the modification of the physicochemical properties of PLA-based scaffolds was studied. In addition, the cellular-mediated immune response when macrophages of three donors interact with the modified surfaces of PLA-based scaffolds was investigated. PLA surface carbonization, accompanied by a carbon atomic concentration increase, was revealed to occur because of plasma treatment. Nitrogen plasma significantly influenced the PLA wettability characteristics, namely, the hydrophilicity and lipophilicity were improved, as well as the surface energy being raised. The viability of cells in the presence of the plasma-modified PLA scaffolds was evaluated to be higher than that of the initial cells.

Ball Lightning–Aerosol Electrochemical Power Source or A Cloud of Batteries

Despite numerous attempts, an adequate theoretical and experimental simulation of ball lightning still remains incomplete. According to the model proposed here, the processes of electrochemical oxidation within separate aerosol particles are the basis for this phenomenon, and ball lightning is a cloud of composite nano or submicron particles, where each particle is a spontaneously formed nanobattery which is short-circuited by the surface discharge because it is of such a small size. As free discharge-shorted current loops, aerosol nanobatteries are exposed to a powerful mutual magnetic dipole–dipole attraction. The gaseous products and thermal energy produced by each nanobattery as a result of the intra-particle self-sustaining electrochemical reactions, cause a mutual repulsion of these particles over short distances and prevent their aggregation, while a collectivization of the current loops of separate particles, due to the electric arc overlapping between adjacent particles, weakens their mutual magnetic attraction over short distances. Discharge currents in the range of several amperes to several thousand amperes as well as the pre-explosive mega ampere currents, generated in the reduction–oxidation reactions and distributed between all the aerosol particles, explain both the magnetic attraction between the elements of the ball lightning substance and the impressive electromagnetic effects of ball lightning.

Particle Surface Modification in the Near-Electrode Region of an RF Discharge

The results of a study on particles’ surfaces after being exposed to the near-electrode region of a radio frequency (RF) discharge are presented. It was experimentally displayed that metal starts being deposited on the surface of particles levitating above the lower electrode of the discharge chamber after switching the RF discharge on. For melamine-formaldehyde (MF) particles, the appearance of an island metal coating is observed after 30 min of plasma exposure. Eroded electrodes and elements of the gas discharge chamber may serve as a source of deposited material. In addition, an analysis of the surface and composition of particles placed on the upper electrode after 6 h of plasma exposure is presented. We reveal that the composition and structure of the particle coating changes during the experiment. The MF particles under exposure become eroded, and needle-like structures containing metals are formed on their surface. We also observe the formation of columnar structures from the products of erosion of electrodes on particles with a metal coating.

Development of a Dual Plasma Desorption/Ionization System for the Noncontact and Highly Sensitive Analysis of Surface Adhesive Compounds

We developed a dual plasma desorption/ionization system using two plasmas for the semi-invasive analysis of compounds on heat-sensitive substrates such as skin. The first plasma was used for the desorption of the surface compounds, whereas the second was used for the ionization of the desorbed compounds. Using the two plasmas, each process can be optimized individually. A successful analysis of phenyl salicylate and 2-isopropylpyridine was achieved using the developed system. Furthermore, we showed that it was possible to detect the mass signals derived from a sample even at a distance 50 times greater than the distance from the position at which the samples were detached. In addition, to increase the intensity of the mass signal, 0%–0.02% (v/v) of hydrogen gas was added to the base gas generated in the ionizing plasma. We found that by optimizing the gas flow rate through the addition of a small amount of hydrogen gas, it was possible to obtain the intensity of the mass signal that was 45–824 times greater than that obtained without the addition of hydrogen gas.

[The analysis of the curative effect of low-temperature plasma cauterization on the treatment of 146 cases of congenital pyriform sinus fistula]

Objective:To investigate the therapeutic effect of low-temperature plasma cauterization on the treatment of congenital pyriform sinus fistula(CPSF).Method:All the 146 patients with CPSF received imaging examination, and the low-temperature plasma cauterization under laryngoscope was performed in the stage of inflammation control.Result:After 6-59 months of follow-up, all patients did not have pharynx fistula, and no massive hemorrhage occurred during and after operation. Nine cases of hoarseness after operation 2 d-1 months to restore normal. Thirty cases were suspected of recurrence, of which 8 cases were cured after incision and drainage, and 4 cases were cured after two cauterization.Conclusion:Low-temperature plasma cauterization is the preferred treatment for the microinvasive, simple, beautiful and repeatable operation of PSF, which can be sugessted as the first-line choice for the treatment of sinus and fistula.

Changes in Content of Bioactive Compounds and Antioxidant Activity Induced in Needles of Different Half-Sib Families of Norway Spruce (Picea abies (L.) H. Karst) by Seed Treatment with Cold Plasma

In order to ensure sufficient food resources for a constantly growing human population, new technologies (e.g., cold plasma technologies) are being developed for increasing the germination and seedling growth without negative effects on the environment. Pinaceae species are considered a natural source of antioxidant compounds and are valued for their pharmaceutical and nutraceutical properties. In this study, the seeds of seven different Norway spruce half-sib families were processed for one or two minutes with cold plasma (CP) using dielectric barrier discharge (DBD) plasma equipment. At the end of the second vegetation season, the total flavonoid content (TFC), DPPH (2,2- diphenyl-1-picryl-hydrazyl-hydrate), and ABTS (2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid)) antioxidant activity, and the amounts of six organic acids (folic, malic, citric, oxalic, succinic, and ascorbic) were determined in the needles of different half-sib families of Norway spruce seedlings. The results show that the TFC, antioxidant activity, and amounts of organic acids in the seedling needles depended on both the treatment duration and the genetic family. The strongest positive effect on the TFC was determined in the seedlings of the 477, 599, and 541 half-sib families after seed treatment with CP for 1 min (CP1). The TFC in these families increased from 118.06 mg g-1 to 312.6 mg g-1 compared to the control. Moreover, seed treatment with CP1 resulted in the strongest increase in the antioxidant activity of the needles of the 541 half-sib family seedlings; the antioxidant activity, determined by DPPH and ABTS tests, increased by 30 and 23%, respectively, compared to the control. The obtained results indicate that the CP effect on the amount of organic acids in the needles was dependent on the half-sib family. It was determined that treatment with CP1 increased the amount of five organic acids in the needles of the 541 half-sib family seedlings. The presented results show future possibilities for using cold plasma seed treatment in the food and pharmacy industries.

[Clinical research of unilateral posterior glottic cleft dilatation in the treatment of bilateral vocal cord paralysis dyspnea]

Objective:The aim of this study is to evaluate the efficacy of unilateral posterior glottic cleft dilatation with low-temperature plasma under the endoscope in the treatment of bilateral vocal cord paralysis dyspnea. Methods:Forty-one patients with bilateral vocal cord paralysis were recruited, and they were all admitted to the Department of Otorhinolaryngology Head and Neck Surgery, the First Affiliated Hospital of Zhengzhou University from March 2014 to June 2019. Those 41 patients were all treated with low-temperature plasma to completely resect unilateral arytenoid cartilage and the posterior 1/3 of the ipsilateral vocal cord. Fiber laryngoscopy was performed before and after operation. The clinical efficacy of the operation was evaluated by the size of glottis cleta, the improvement rate of dyspnea, voice satisfaction, swallowing function, the tracheal cannula removal rate and postoperative complication rate. Results:Forty-one patients were followed up for 24-88 months. The rate of one-pass extubation was 88.57%（31/35）. The satisfaction rate of voice was 92.11%（35/38）. The recovery rate of swallowing function was 97.56%（40/41）. Conclusion:This study demonstrated that the application of low-temperature plasma in unilateral posterior glottic cleft dilatation could significantly improved the ventilation function of patients with bilateral vocal cord paralysis, with a reliable curative effect and a high extubation rate. It is a safe, reliable, simple and minimally invasive treatment option for the treatment of bilateral vocal cord paralysis.

Influence of Laser Micro-Texturing and Plasma Treatment on Adhesive Bonding Properties of WC-Co Carbides with Steel

This article presents research on advanced surface preparation methods for sintered carbides (WC-Co, grade B2) commonly used in the tool industry, particularly in the context of bonding these materials with C45 steel using adhesives. Sintered carbides are widely used due to their high hardness, wear resistance, and good ductility, making them ideal for manufacturing tools operating in harsh conditions. Traditional bonding methods, such as brazing and welding, often result in stresses and cracks. Adhesive bonding has therefore emerged as an effective alternative to mitigate these challenges. The research focuses on comparing the results obtained through modern surface treatment techniques, such as laser micro-texturing and plasma treatment, with traditional methods like grinding, abrasive blasting, and electrolytic etching. The influence of these methods on adhesion properties and the strength of adhesive bonds was evaluated through mechanical tests, including static shear and pull-off tests. An approximately 50% increase in the mechanical strength of adhesive joints was observed for surfaces treated with low-temperature plasma (operating voltage: 18 kV, flow of gasses: 20 l/min., treatment time: 60 s) and laser micro-texturing (infrared fiber laser, wavelength: 1064 nm (±5 nm), power: 20 W), as compared to mechanical grinding. The shear strength of the adhesive joints was equal to 32 MPa and 30 MPa on average in the case of treatment with low-temperature plasma made of helium and argon, respectively. The highest strength of an adhesive joint was equal to 34.5 MPa on average in the case of laser micro-texturing.

Fast preparation of Eu(BTB) MOFs in dielectric barrier discharge liquid plasma for luminescent sensing of trace iron

Lanthanide metal-organic frameworks Eu(BTB) MOFs was synthesized in low-temperature plasma produced by dielectric barrier discharge (DBD). This DBD synthesis possesses the characteristics of rapid reaction (within 20 min), mild condition (low temperature and atmospheric pressure) and simple operation compared with many traditional synthesis methods. The prepared Eu(BTB) MOF material exhibits typical red light emitting of europium (Eu³⁺ ) at 617 nm, which can selectively and sensitively be quenched in the presence of trace iron(III) ion (Fe³⁺ ). A simple, fast and sensitive fluorescence sensing strategy of Fe³⁺ was thus constructed, with a limit of detection (LOD) of 0.5 μM. Compared with reported fluorescence probes, Eu(BTB) MOFs have also demonstrated the advantages of low cost, easy and fast preparation, great stability, and excellent optical properties, thus making them a promising fluorescence candidate for trace Fe³⁺ sensing for the potential application in biological systems in the future.

Gas-Thermal Spraying Synthesis of β-Ga2O3 Luminescent Ceramics

This paper presents the initial results of the synthesis of β-Ga2O3 luminescent ceramics via plasma gas-thermal spraying synthesis, where low-temperature plasma of an argon and nitrogen mixture was employed. A direct current electric arc generator of high-enthalpy plasma jet with a self-aligning arc length and an expanding channel of an output electrode served as a plasma source. The feedstock material consisted of a polydisperse powder of monocrystalline β-Ga2O3 with particle sizes ranging from 5 to 50 μm. The study presents the results of both theoretical and experimental studies on the heating rate and average temperature of gallium oxide particles in a plasma jet. The results of computational modelling of the synthesis process of β-Ga2O3 via plasma gas-thermal spraying are shown. The obtained ceramic samples were characterized using scanning electron microscopy and X-ray diffraction analysis. Our results indicate that the synthesis process yielded ceramics with a layered texture. The stoichiometric composition of ceramics exhibited a shift towards gallium-rich content. X-ray diffraction data demonstrated a reduction in the lattice parameters and unit cell volume of β-Ga2O3 ceramic structure. Radioluminescence spectra of β-Ga2O3 ceramics revealed an intensive emission band with a maximum at ~360 nm and non-exponential decay. The synthesized β-Ga2O3 ceramics possess potential applications in scintillation detectors.

Plasma Modification Effects of Thermoplastic Starch (TPS) Surface Layer: Film Wettability and Sterilization

The effect of low-temperature plasma treatment on the surface properties of thermoplastic starch film (TPS) was investigated. The surface layer (SL) modification of polymeric materials is mainly carried out to improve wettability and adhesive properties and to increase surface cleanliness. TPS was modified in an air atmosphere under either atmospheric or reduced pressure. The process parameters for modifying the SL of TPS were determined based on wettability assessment using a goniometer, geometric structure using scanning electron microscopy (SEM), and the degree of oxidation (O/C ratio) using X-ray photoelectron spectroscopy (XPS). Additionally, the effect of plasma treatment on TPS film sterilization was investigated.