Outcomes of reverse total shoulder arthroplasty as primary versus revision procedure for proximal humerus fractures

BACKGROUND

Reverse total shoulder arthroplasty (RTSA) has been shown to be an effective treatment for proximal humerus fracture (PHF). This study evaluates outcomes of all patients with PHF treated with RTSA as a primary procedure for acute PHF, a delayed primary procedure for symptomatic PHF malunion or nonunion, a revision procedure for failed PHF hemiarthroplasty (HA), or a revision procedure for failed open reduction and internal fixation (ORIF).

METHODS

Patients who underwent RTSA for PHF were evaluated for active range of motion and Shoulder Pain and Disability Index (SPADI), Simple Shoulder Test-12, American Shoulder and Elbow Surgeons (ASES), University of California-Los Angeles (UCLA) shoulder rating scale, Constant, and 12-Item Short Form Health Survey scores. Scaption and external rotation (ER) strength were also assessed.

RESULTS

RTSA was performed in 49 patients with PHF; 13 patients underwent RTSA for acute PHF, 13 for malunion or nonunion, 12 for failed PHF HA, and 11 for failed PHF ORIF. ER range of motion, SPADI, ASES, UCLA, and Constant scores achieved significance. The acute fracture group significantly outperformed the failed HA group in SPADI, ASES, and UCLA scores. The malunion/nonunion group significantly outperformed the failed HA group in ASES and UCLA scores. The acute fracture and malunion/nonunion groups each had significantly greater ER than the failed HA group.

CONCLUSION

RTSA is an effective treatment option for PHF as both a primary and a revision procedure. Primary RTSA outperformed RTSA done as a revision procedure. RTSA for acute PHF is comparable to RTSA for malunions and nonunions. Our outcomes of revision RTSA for failed HA and ORIF are more promising than previously published.

Defining optimal calcar screw positioning in proximal humerus fracture fixation

BACKGROUND

Anatomic reduction and placement of an inferior calcar screw are strategies to prevent fixation failure in proximal humerus factures. Optimal position of the calcar screw remains unknown.

METHODS

There were 168 shoulders (68.5% female; average age, 63.6 ± 11.5 years) that underwent open reduction and internal fixation of a displaced proximal humerus fracture involving the surgical or anatomic neck. Univariate and multivariate analyses were performed on preoperative clinical, preoperative radiographic, and postoperative radiographic variables to determine association with fixation failure. A receiver operating characteristic curve was performed to determine a maximum distance from the inferior screw to the calcar ("calcar distance") as well as a maximum ratio of this distance and the head diameter ("calcar ratio").

RESULTS

There were 26 of 168 (15.5%) patients with radiographic failures (19 related to fixation failure). Univariate analysis and multivariate analyses found quality of reduction (P < .001), calcar distance (P < .001), and calcar ratio (P < .001) to be significantly associated with radiographic success. In all patients, receiver operating characteristic analysis found quantifiable thresholds of 12 mm or within the bottom 25% of the humeral head as measures to prevent fixation failure.

CONCLUSIONS

Quality of reduction, calcar distance, and calcar ratio independently correlated with fixation failure. This study provides optimal distances and ratios for calcar screw placement that can be used clinically.

Calcaneal Fractures - Should We or Should We not Operate?

The best treatment for displaced, intraarticular fractures of the calcaneum remains controversial. Surgical treatment of these injuries is challenging and have a considerable learning curve. Studies comparing operative with nonoperative treatment including randomized trials and meta-analyses are fraught with a considerable number of confounders including highly variable fracture patterns, soft-tissue conditions, patient characteristics, surgeon experience, limited sensitivity of outcome measures, and rehabilitation protocols. It has become apparent that there is no single treatment that is suitable for all calcaneal fractures. Treatment should be tailored to the individual fracture pathoanatomy, accompanying soft-tissue damage, associated injuries, functional demand, and comorbidities of the patient. If operative treatment is chosen, reconstruction of the overall shape of the calcaneum and joint surfaces are of utmost importance to obtain a good functional result. Despite meticulous reconstruction, primary cartilage damage due to the impact at the time of injury may lead to posttraumatic subtalar arthritis. Even if subtalar fusion becomes necessary, patients benefit from primary anatomical reconstruction of the hindfoot geometry because in situ fusion is easier to perform and associated with better results than corrective fusion for hindfoot deformities in malunited calcaneal fractures. To minimize wound healing problems and stiffness due to scar formation after open reduction and internal fixation (ORIF) through extensile approaches several percutaneous and less invasive procedures through a direct approach over the sinus tarsi have successfully lowered the rates of infections and wound complications while ensuring exact anatomic reduction. There is evidence from multiple studies that malunited displaced calcaneal fractures result in painful arthritis and disabling, three-dimensional foot deformities for the affected patients. The poorest treatment results are reported after open surgical treatment that failed to achieve anatomic reconstruction of the calcaneum and its joints, thus combining the disadvantages of operative and nonoperative treatment. The crucial question, therefore, is not only whether to operate or not but also when and how to operate on calcaneal fractures if surgery is decided.

Corrective Osteotomy for Malunited Diaphyseal Forearm Fractures Using Preoperative 3-Dimensional Planning and Patient-Specific Surgical Guides and Implants

PURPOSE

Three-dimensional planning based on computed tomography images of the malunited and the mirrored contralateral forearm allows preoperative simulations of corrective osteotomies, the fabrication of patient-specific osteotomy guides, and custom-made 3-dimensional printed titanium plates. This study aims to assess the precision and clinical outcome of this technique.

METHODS

This was a prospective pilot study with 5 consecutive patients. The mean age at initial injury was 11 years (range, 4-16 years), and the mean interval from the time of injury to the time of corrective surgery was 32 months (range, 7-107 months). Patient-specific osteotomy guides and custom-made plates were used for multiplanar corrective osteotomies of both forearm bones at the distal level in 1 patient and at the middle-third level in 4 patients. Patients were assessed before and after surgery after a mean follow-up of 42 months (range, 29-51 months).

RESULTS

The mean planned angular corrections of the ulna and radius before surgery were 9.9° and 10.0°, respectively. The mean postoperative corrections obtained were 10.1° and 10.8° with corresponding mean errors in correction of 1.8° (range, 0.3°-5.2°) for the ulna and 1.4° (range, 0.2°-3.3°) for the radius. Forearm supination improved significantly from 47° (range, 25°-75°) before surgery to 89° (range, 85°-90°) at final review. Forearm pronation improved from 68° (range, 45°-84°) to 87° (range, 82°-90°). In addition, there was a statistically significant improvement in pain and grip strength.

CONCLUSIONS

This study demonstrates that 3-dimensional planned patient-specific guides and implants allow the surgeon to perform precise corrective osteotomies of complex multiplanar forearm deformities with satisfactory preliminary results.

TYPE OF STUDY/LEVEL OF EVIDENCE

Therapeutic V.

The impact of patient activity level on wrist disability after distal radius malunion in older adults

OBJECTIVE

To determine if high-activity older adults are adversely affected by distal radius malunion.

DESIGN

Cross-sectional study.

SETTING

Hand clinics at a tertiary institution.

PARTICIPANTS

Ninety-six patients 60 years or older at the time of fracture were evaluated at least 1 year after distal radius fracture.

INTERVENTION

Physical Activity Scale of the Elderly scores stratified participants into high- and low-activity groups. Malunions were defined radiographically by change of ≥20 degrees of lateral tilt, ≥15 degrees radial inclination, ≥4 mm of ulnar variance, or ≥4 mm intra-articular gap or step-off, compared with the uninjured wrist.

MAIN OUTCOME MEASURE

Patient-rated disability of the upper extremity was measured by the QuickDASH and visual analog scales (VAS) for pain/function. Strength and motion measurements objectively quantified wrist function.

RESULTS

High-activity participants with a distal radius malunion were compared with high-activity participants with well-aligned fractures. There was no significant difference in QuickDASH scores, VAS function, strength, and wrist motion despite statistically, but not clinically, relevant increases in VAS pain scores (difference 0.5, P = 0.04) between the groups. Neither physical Activity Scale of the Elderly score (β = 0.001, 95% confidence interval: -0.002 to 0.004) nor malunion (β = 0.133, 95% confidence interval: -0.26 to 0.52) predicted QuickDASH scores in regression modeling after accounting for age, sex, and treatment. Operative management failed to improve outcomes and resulted in decreased grip strength (P = 0.05) and more frequent complications (26% vs. 7%, P = 0.01) when compared with nonoperative management.

CONCLUSIONS

Even among highly active older adults, distal radius malunion does not affect functional outcomes. Judicious use of operative management is warranted provided heightened complication rates.

LEVEL OF EVIDENCE

Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Accuracy of 3D Virtual Planning of Corrective Osteotomies of the Distal Radius

Corrective osteotomies of the distal radius for symptomatic malunion are time-tested procedures that rely on accurate corrections. Patients with combined intra- and extra-articular malunions present a challenging deformity. Virtual planning and patient-specific instruments (PSIs) to transfer the planning into the operating room have been used both to simplify the surgery and to make it more accurate. This report focuses on the clinically achieved accuracy in four patients treated between 2008 and 2012 with virtual planning and PSIs for a combined intra- and extraarticular malunion of the distal radius. The accuracy of the correction is quantified by comparing the virtual three-dimensional (3D) planning model with the postoperative 3D bone model. For the extraarticular malunion the 3D volar tilt, 3D radial inclination and 3D ulnar variance are measured. The volar tilt is undercorrected in all cases with an average of -6 ± 6°. The average difference between the postoperative and planned 3D radial inclination was -1 ± 5°. The average difference between the postoperative and planned 3D ulnar variances is 0 ± 1 mm. For the evaluation of the intraarticular malunion, both the arc method of measurement and distance map measurement are used. The average postoperative maximum gap is 2.1 ± 0.9 mm. The average maximum postoperative step-off is 1.3 ± 0.4 mm. The average distance between the postoperative and planned articular surfaces is 1.1 ± 0.6 mm as determined in the distance map measurement. There is a tendency to achieve higher accuracy as experience builds up, both on the surgeon's side and on the design engineering side. We believe this technology holds the potential to achieve consistent accuracy of very complex corrections.

Volar Radioscapholunate Arthrodesis and Distal Scaphoidectomy After Malunited Distal Radius Fractures

PURPOSE

The purpose of this study was to assess range of motion (ROM), pain, and incidence of radiographic degenerative joint disease (DJD) after volar radioscapholunate (RSL) arthrodesis and distal scaphoidectomy (DSE) following malunited distal radius fractures (DRF).

METHODS

Fourteen patients with malunited DRF and DJD limited to the radiocarpal joint underwent RSL arthrodesis and DSE between 2006 and 2014. These were retrospectively analyzed both clinically and radiologically. Eleven patients with a mean follow-up of 63 months (range, 30-97 months) were included in the final analysis because 1 was unavailable and 2 had died. The outcome was evaluated using parameters of pain, ROM, grip strength, nonunion rate, and DJD of the adjacent joints. In addition, self-assessment by patients was registered on the Disability of the Arm, Shoulder and Hand score, Patient-Rated Wrist Evaluation score, and Michigan Hand Outcomes Questionnaire. To investigate DJD and union, a computed tomography (CT) scan at the final follow-up visit was performed.

RESULTS

All patients showed union and no midcarpal DJD in the CT scans at final follow-up. The mean ROM in extension was 53°, flexion 42°, supination 81°, pronation 85°, radial deviation 10° and ulnar deviation 25°. The ROM in extension, extension/flexion arc, and supination improved significantly after surgery. Patients achieved a mean of 80% of grip strength compared with the other hand.

CONCLUSIONS

Volar angular stable plate RSL arthrodesis with resection of the distal scaphoid pole is a safe and effective method for treating malunited DRF. This leads to an improved ROM and low pain level.

TYPE OF STUDY/LEVEL OF EVIDENCE

Therapeutic IV.

Genetic factors responsible for long bone fractures non-union

INTRODUCTION

Approximately 10-15% of all fractures of long bones heal with delay, prolonged immobilization and repetitive operative interventions. Despite intense investigations, the pathomechanism of impaired healing of skeletal tissue remains unclear. An important role in the pathomechanism of mal-union of close fractures plays subclinically proceeding infections.

AIM

The question arises whether colonization and proliferation of bacteria in the fracture gap could be related to the mutation of genes for factors regulating local antimicrobial response, such as pathogen recognizing receptors (PRR), cytokines and chemokines.

METHODS

We carried out studies in patients with delayed long bone fractures estimating the frequency of mutation of genes crucial for pathogen recognition (TLR2, TLR4 and CD14), and elimination (CRP, IL-6, IL-1ra), as well as wound healing (TGF-β). The molecular milieu regulating healing process (IGF-1, COLL1a, TGF-β, BMP-2, and PDGF) was validated by Western blot analysis of the gap tissue.

RESULTS

Microbiological investigations showed the presence of viable bacterial strains in 34 out of 108 gaps in patients with non-healing fractures (31.5%) and in 20 out of 122 patients with uneventful healing (16.4%) (P < 0.05). The occurrence of mutated TLR4 1/W but not 2/W gene was significantly higher (P < 0.05) in the non-healing infected than sterile group. In the non-healing infected group 1/W mutated gene frequency was also higher than in healing infected. In the TGF-β codon 10 a significantly higher frequency of mutated homozygote T and heterozygote C/T in the non-healing infected versus non-healing sterile subgroup was observed (P < 0.05). Similar difference was observed in the non-healing infected versus healing infected subgroup (P < 0.05). The CRP (G1059C), IL1ra (genotype 2/2), IL-6 (G176C), CD14 (G-159T), TLR2 (G2259A) and TLR4/2 (Thr399Ile) polymorphisms did not play evident role in the delay of fracture healing.

CONCLUSIONS

Individuals bearing the mutant TLR 4 gene 1/W (Asp299Gly) and TGF-β gene codon 10 mutant T and T/C allele may predispose to impaired pathogen recognition and elimination, leading to prolonged pathogen existence in the fracture gaps and healing delays.

Complications of open reduction and internal fixation of distal humerus fractures

Treatment of distal humerus fractures is demanding. Surgery is the optimal treatment and preoperative planning is based on fracture type and degree of comminution.

Fixation with two precontoured anatomical locking plates at 90^o:90^o orthogonal or 180^o parallel is the optimal treatment.

The main goal of surgical treatment is to obtain stable fixation to allow immediate postoperative elbow mobilization and prevent joint stiffness.

Despite evolution of plates and surgical techniques, complications such as mechanical failure, ulnar neuropathy, stiffness, heterotopic ossification, nonunion, malunion, infection, and complications from olecranon osteotomy are quite common.

Distal humerus fractures still present a significant technical challenge and need meticulous technique and experience to achieve optimal results.

Cite this article: EFORT Open Rev 2018;3:558-567. DOI: 10.1302/2058-5241.3.180009

The use of bone grafts and substitutes in the treatment of distal radius fractures

The interest in developing biomaterials to augment fracture healing continues to grow. New products promise early return to function with minimal morbidity; however, indications to use these products remain unclear. An ideal bone graft material stimulates bone healing and provides structural stability while being biocompatible, bioresorbable, easy to use, and cost-effective. This article reviews the biology of bone grafts and the clinical evidence in the use of bone graft substitutes for the treatment of distal radius fractures.

Ulnar Shortening Osteotomy After Distal Radius Fracture Malunion: Review of Literature

Malunion of distal radius fracture is often complicated with shortening of the radius with disturbed radio- ulnar variance, frequently associated with lesions of triangular fibrocartilage complex and instability of the distal radioulnar joint. Positive ulnar variance may result in wrist pain located in ulnar part of the joint, limited ulnar deviation and forearm rotation with development of degenerative changes due to the overloading that occurs between the ulnar head and corresponding carpus. Ulnar shortening osteotomy (USO) is the standard procedure for correcting positive ulnar variance. Goal of this procedure is to minimize the symptoms by restoring the neutral radio - ulnar variance. In this paper we present a variety of surgical techniques available for ulnar shorthening osteotomy, their advantages and drawbacks. Methods of ulnar shortening osteotomies are divided into intraarticular and extraarticular. Intraarticular method of ulnar shortening can be performed arthroscopically or through open approach. Extraarticular methods include subcapital osteotomy and osteotomy of ulnar diaphysis, which depending on shape can be transverse, oblique, and step cut. All of those osteotomies can be performed along wrist arthroscopy in order to dispose and treat possibly existing triangular fibrocartilage complex injuries. At the end we described surgical procedures that can be done in case of ulnar shorthening osteotomy failure.

Treatment of hypertrophic distal tibia nonunion and early malunion with callus distraction

BACKGROUND

Hypertrophic nonunions and early malunions of pilon and distal tibia fractures result in complex, challenging to treat deformities. Callus distraction histiogenesis is an option for their management, allowing for the simultaneous correction of multiplanar deformity and limb length discrepancy.

METHODS

A single-surgeon, retrospective case series was performed. Eight patients (6 males and 2 females) who were treated with callus distraction from 1991 to 2011 were reviewed. Six of 8 patients had varus deformities (range, 8-19 degrees) and 2 patients had valgus deformities (both 16 degrees) of the distal tibia metaphysis. Six of 8 had apex anterior deformities (range, 2-21 degrees) and 2 had apex posterior deformity (range, 9-20 degrees). An Ilizarov fixator or Taylor Spatial Frame (Smith & Nephew, Memphis, TN) was used to distract the nonunion or early malunion to correct alignment and shortening. Preoperative and postoperative radiographic outcomes, limb alignment, and ankle-hindfoot scores were reviewed.

RESULTS

Union was achieved in all patients at a mean of 5.8 months (range, 4.1-7.6 months). The 3 patients treated with an Ilizarov-type fixator had deformity correction to within 5 degrees of neutral in 1 plane and to within 10 degrees in the other plane. All 5 patients treated with a Taylor Spatial Frame had correction to within 5 degrees of neutral alignment in both coronal and sagittal planes. There were 2 complications requiring reoperation and 1 persistent limb length discrepancy (2 cm) after treatment. Median AOFAS ankle-hindfoot score was 82.5 (range, 53-90) at an average follow-up of 30.4 months (range, 8-92).

CONCLUSIONS

Callus distraction histiogenesis was a minimally invasive technique that can successfully treat patients with hypertrophic nonunion and early malunion of the distal tibia. We believe the application of a computer-assisted 6-axis frame to correct the deformity improved the correction of these multiplanar deformities.

LEVEL OF EVIDENCE

Level IV, case series.

Scaphoid Fractures: Nonunion and Malunion

The treatment of scaphoid nonunion and malunions has undergone a considerable transition since the 1960 modification of Matti's technique by Russe.¹ We present a review of articles with clear data on union rates and functional status to review the current methods of treatment for scaphoid nonunion and malunion.

Failure to restore the calcar and locking screw cross-threading predicts varus collapse in proximal humerus fracture fixation

BACKGROUND

Varus collapse is a common failure mode of proximal humerus fracture (PHF) fixation. The purpose of this study was to analyze predictors of varus collapse of PHF after open reduction, internal fixation (ORIF).

METHODS

All patients who underwent ORIF of a PHF from January 2008 to July 2018 were identified. Known predictors of fixation failure were assessed, including calcar distance, calcar ratio, and calcar restoration. Additionally, the presence of cross-threaded screws was determined. The primary outcome analyzed was varus collapse of the fracture defined as a change in neck shaft angulation to less than 120°.

RESULTS

There were 112 patients identified who underwent ORIF of a PHF that met inclusion criteria. The population was 75.0% female (84/112), average age was 62.5 ± 10.4 years (range 40.0-87.9), and average body mass index was 28.0 ± 5.5 (17.5-46.4). There were 17 with varus collapse. In 11 of the 17 patients (64.7%), there was screw cross-threading (vs. 31/95 [32.6%] in those that did not collapse); P = .012. In addition, 8 of the 17 (47.1%) did not have restoration of the calcar (vs. 16/95 [16.8%]; P = .005).

CONCLUSION

This study identifies 2 surgeon-controlled variables that can contribute to varus collapse after ORIF of PHFs. Cross-threading of locking screws and failure to restore the medial calcar can be a function of implant design, surgeon technical skill, and/or bone quality.

Opening wedge osteotomy for distal radius malunion: dorsal or palmar approach?

Background There are various technical variations to consider when performing a corrective osteotomy of a distal radius malunion. We chose two of the more commonly reported techniques and compared the results of volar (palmar) osteotomy and fixation with dorsal osteotomy and fixation. Method Within a continuous cohort of patients who had undergone corrective osteotomy for a malunited Colles fracture, two groups could be identified retrospectively. In 8 patients a dorsal approach was used. A structural trapezoidal graft, subtending the amount of correction, was inserted into the osteotomy gap and stabilization was performed with a thin round-hole mini-fragment plate. In 14 patients a palmar approach and a palmar fixed-angle plate was used for correction of the malunion and for angular stable rigid fixation of the two fragments. The osteotomy gap was loosely filled with nonstructural cancellous bone chips. A retrospective comparison of the two groups was performed to see whether the outcome was affected by the use of either operative technique.The demographics, the preoperative amount of deformity, range of motion, pain, and force were comparable for both groups. All osteotomies healed without loss of correction. After a minimal follow-up of one year, radiographic appearance, objective functional parameters were assessed and subjective data (Disabilities of the Arm, Shoulder, and Hand [DASH] score and special pain and function questionnaire) obtained. Results These data did not show statistical difference for the two groups except for the amount of final wrist flexion. This parameter was significantly better in patients who had palmar approaches and fixed-angle plates. Conclusion Corrective osteotomies of distal radius malunions can be done in either way. It might result in some better flexion, if performed volarly.

Reconstruction of calcaneal fracture malunion with osteotomy and subtalar joint salvage: technique and outcomes

BACKGROUND

The goal of this study was to discuss the outcomes of treating calcaneal fracture malunion by restoring the subtalar joint with a reconstructive osteotomy.

METHODS

From May 2005 to November 2008, 24 patients (26 feet) with calcaneal malunions after a displaced intra-articular calcaneal fracture were treated by osteotomy and autogenous bone graft. The subtalar joint was preserved. The mean time from initial injury to reconstructive operation was 5.7 months (95% confidence interval, 4.5-8.8 months). The displaced posterior facet was restored through a reconstructive osteotomy, whereas the bone defect in the calcaneus after reduction was filled with the exostosis that had been removed; iliac bone graft was used if necessary. All patients were evaluated clinically and radiographically at a minimum of 24 months. Twenty patients (21 feet) were followed for a mean of 34.2 months (29.0-39.4 months).

RESULTS

According to American Orthopaedic Foot & Ankle Society (AOFAS) ankle and hindfoot score, the average score was 85.9 points (95% confidence interval, 81.5-90.4 points), which was significantly higher than the preoperative assessment. Radiographs showed that Böhler's angle, Gissane's angle, talus declination angle, and width and height of calcaneus were improved to a great extent. Six patients had wound edge necrosis, and 2 had superficial infection. One patient required a subtalar fusion for subtalar arthritis at 2 years after surgery.

CONCLUSIONS

Restoring the subtalar joint with a reconstructive osteotomy and autogenous bone graft was an effective treatment method for selected calcaneal fracture malunions. It reconstructed calcaneal morphology and preserved the subtalar joint.

LEVEL OF EVIDENCE

Level IV, retrospective case series.

Operative versus nonoperative treatment of humeral shaft fractures: a systematic review and meta-analysis

BACKGROUND

The humeral shaft fracture accounts for 1%-3% of all fractures and occurs in both the young and old population. However, the optimal treatment is still a matter of debate. Even though nonoperative treatment is commonly considered the gold standard, advantages have been described using operative stabilization. This systematic review aims to compare operative and nonoperative treatment in adult patients with humeral shaft fractures.

METHOD

We used the following databases: PubMed, Embase, Cochrane, and CINAHL on October 1, 2018, searching for randomized controlled trials (RCTs) and cohort studies. Two reviewers screened the studies using Covidence, followed by systematic data extraction. The primary outcome was defined as posttreatment complications such as nonunion, radial nerve palsy, malunion, and infections. The secondary outcomes were functional scores and patient-reported outcome measures (PROMs). To assess study quality, the risk of bias in nonrandomized studies of interventions and the Cochrane risk of bias tool were used.

RESULTS

Twelve studies were included: 1 RCT, 1 prospective cohort, and 10 retrospective cohorts with a total of 1406 patients, of whom 835 were treated operatively and 571 nonoperatively. Mean age ranged from 35 to 64, and 54% of the patients were male. The cohort studies had, in general, moderate bias, whereas the RCT had a low bias. There were statistically significant fewer nonunions in the operative treated group with a risk ratio of 0.49 (0.35-0.67), yielding a number needed to treat = 12. There were more deep infections in the operative group with a risk ratio of 2.76 (1.01-7.53) but otherwise no statistical differences concerning malunion or nerve damage. Only 1 study included PROM data.

CONCLUSION

There were fewer nonunions in the operative group but more deep infections. Because of the lack of studies reporting PROMs, the potential positive effect of operative therapy in early aftercare could not be evaluated. Therefore, PROMs should be mandatory in future comparative studies.

Long-Term Outcomes of Scaphoid Malunion

Background: The optimal treatment of patients with a scaphoid malunion remains controversial. The long-term outcomes of operative and nonoperative management have not been established. Methods: We conducted a retrospective review of the outcomes of all scaphoid malunions treated at single institution over a 30-year period. This included patients who underwent corrective osteotomy, salvage procedures (ie, dorsal cheilectomy, radial styloidectomy, and scaphoidectomy with midcarpal fusion), and those who refused operative intervention. The Mayo Wrist Score was determined at the time of surgical evaluation. Patient-Rated Wrist Evaluation (PRWE) and Disabilities of the Arm, Shoulder and Hand (QuickDASH) surveys were sent to all patients for long-term follow-up. Results: Seventeen patients had follow-up at a mean 21.4 years (range, 12-30 years). The mean initial lateral intrascaphoid angle was 58°. Of the 17 patients, 11 proceeded with surgery and 6 opted for nonoperative management. A corrective osteotomy was performed in 4 patients. Of the remaining 7 surgical patients, 5 patients underwent procedures such as cheilectomy and radial styloidectomy, whereas 2 patients had a scaphoidectomy with midcarpal fusion. The final mean PRWE and QuickDASH scores for corrective osteotomy, salvage procedures, and nonoperative treatment were 23 and 6, 18 and 10, and 33 and 22, respectively. Conclusion: Long-term outcomes were similar between operative and nonoperative management.

Congenital insensitivity to pain and anhidrosis

Congenital insensitivity to pain and anhidrosis (CIPA) is a rare reported entity characterised by disturbance in the pain and temperature perception due to involvement of the autonomic and sensory nervous system. It is an autosomal recessive trait with several defects of the gene NTRK1 coding for the neurotrophic tyrosine kinase - a nerve growth factor receptor on chromosome 1q21-q22. Traumatic fractures are common and, because of lack of pain, may go unrecognised for prolonged periods, resulting in nonunion or pseudoarthrosis. A Charcot joint may be the end result. Treatment complications are very common in these patients and range from infection to wound breakdown to failure of fixation. We report here a rare case of CIPA in a 9-year-old girl and her younger male sibling with generalised absence of pain, anhidrosis and its orthopaedic implications.

Management of Talar Body Fractures

Fractures of talar body are uncommon injuries often associated with fractures of other long bones and in polytraumatized patients. The integrity of the talus is essential for the normal function of the ankle, subtalar, and midtarsal joints. The relative infrequency of this injury limits the number of studies available to guide treatment. They occur as a result of high-velocity trauma and are therefore associated with considerable soft tissue damage. Axial compression with supination or pronation is the common mechanism of injury. Great care is necessary for diagnosing and treating these injuries. Clinically, talar body fractures present with soft tissue swelling, hematoma, deformity, and restriction of motion. Associated neurovascular injury of the foot should be carefully examined. The initial evaluation should be done with foot, and ankle radiographs and computed tomography is often done to analyze the extent of the fracture, displacement, intraarticular extension, comminution, and associated fractures. Differentiating talar neck from body fractures is important. Optimal treatment relies on an accurate understanding of the injury and the goals of treatment are the restoration of articular surface and axial alignment. Indications for nonoperative management are seldom indicated and are few as in nonambulatory patients, or in with multiple comorbidities who are not able to tolerate surgery. Splinting, followed by short leg casting for 6 weeks until fracture union should be undertaken. Surgery is indicated in most of the cases, and different approaches have been described. Sometimes, a dual approach with a malleolar osteotomy is necessary for articular restoration. Clinical outcomes depend on the severity of the initial injury and the quality of reduction and internal fixation. The various complications are avascular necrosis, malunion, infections, late osteoarthritis, and ankylosis of subtalar joint.

Computer-assisted planning and patient-specific guides for the treatment of midshaft clavicle malunions

BACKGROUND

The surgical treatment of malunions after midshaft clavicle fractures is associated with a number of potential complications and the surgical procedure is challenging. However, with appropriate and meticulous preoperative surgical planning, the surgical correction yields satisfactory results. The purpose of this study was to provide a guideline and detailed overview for the computer-assisted planning and 3-dimensional (3D) correction of malunions of the clavicle.

METHODS

The 3D bone surface models of the pathologic and contralateral sides were created on the basis of computed tomography data. The computer-assisted assessment of the deformity, the preoperative plan, and the design of patient-specific guides enabling compression plating are described.

RESULTS

We demonstrate the benefit and versatility of computer-assisted planning for corrective osteotomies of malunions of the midshaft clavicle. In combination with patient-specific guides and compression plating technique, the correction can be performed in a more standardized fashion. We describe the determination of the contact-optimized osteotomy plane. An osteotomy along this plane facilitates the correction and enlarges the contact between the fragments at once. We further developed a technique of a stepped osteotomy that is based on the calculation of the contact-optimized osteotomy plane. The stepped osteotomy enables the length to be restored without the need of structural bone graft. The application of the stepped osteotomy is presented for malunions of the clavicle with shortening and excessive callus formation.

CONCLUSIONS

The 3D preoperative planning and patient-specific guides for corrective osteotomies of the clavicle may help reduce the number of potential complications and yield results that are more predictable.

Three-Dimensional Correction of Complex Ankle Deformities With Computer-Assisted Planning and Patient-Specific Surgical Guides

Three-dimensional computer-assisted preoperative planning, combined with patient-specific surgical guides, has become an effective technique for treating complex extra- and intraarticular bone malunions by corrective osteotomy. The feasibility and accuracy of such a technique has not yet been evaluated for ankle deformities. Four surgical cases of varying complexity and location were selected for evaluation. Three-dimensional bone models of the affected and contralateral healthy lower limb were generated from computed tomography scans. The preoperative planning software permitted quantification of the deformity in 3 dimensions and subsequent simulation of reduction, yielding a precise surgical plan. Patient-specific surgical guides were designed, manufactured, and finally applied during surgery to reproduce the preoperative plan. Evaluation of the postoperative computed tomography scans indicated adequate reduction accuracy with residual translational and rotational errors of <3 mm and <6°, respectively. Two patients required revision surgery owing to anterior osseous impingement or delayed union of the osteotomy. All patients were satisfied with the postoperative course and were pain free at a mean follow-up period of 2.5 (range 1 to 4) years. These promising results require confirmation in a clinical study with a larger sample size.

Gait Analysis to Monitor Fracture Healing of the Lower Leg

Fracture healing is typically monitored by infrequent radiographs. Radiographs come at the cost of radiation exposure and reflect fracture healing with a time lag due to delayed fracture mineralization following increases in stiffness. Since union problems frequently occur after fractures, better and timelier methods to monitor the healing process are required. In this review, we provide an overview of the changes in gait parameters following lower leg fractures to investigate whether gait analysis can be used to monitor fracture healing. Studies assessing gait after lower leg fractures that were treated either surgically or conservatively were included. Spatiotemporal gait parameters, kinematics, kinetics, and pedography showed improvements in the gait pattern throughout the healing process of lower leg fractures. Especially gait speed and asymmetry measures have a high potential to monitor fracture healing. Pedographic measurements showed differences in gait between patients with and without union. No literature was available for other gait measures, but it is expected that further parameters reflect progress in bone healing. In conclusion, gait analysis seems to be a valuable tool for monitoring the healing process and predicting the occurrence of non-union of lower leg fractures.

Adult Posttraumatic Reconstruction Using a Magnetic Internal Lengthening Nail

A new generation of internal lengthening nail is now available that has reliable remote-controlled mechanisms. This allows accurate and well-controlled distraction rate and rhythm, and early clinical results have been very positive. In this article, 2 posttraumatic cases are presented that illustrate deformity correction and lengthening using the internal lengthening nail. Surgical planning and adjuvant techniques of fixator-assisted nailing and the use of blocking screws are discussed.

Malunion of the Tibia: A Systematic Review

Background and Objectives: Tibial malunions are defined as tibial fractures that have healed in a clinically unacceptable position, resulting in deformity such as shortening, lengthening, abnormal rotation, or angulation. These deformities can have adverse effects on patients, such as pain and gait disturbance, as well as long term development of post-traumatic arthritis. This paper seeks to highlight some of the options for surgical management of malunions and detail the strategies and approaches used to manage these complicated cases. Materials and Methods: An exhaustive search was conducted on PubMed using the key search terms “Tibial” OR “Tibia” AND “Malunion” to be included in the title. Exclusions to the search included any article with patients aged < 18 years, any nonhuman subjects, and any article not published or translated into English. Results: A systematic review of the literature revealed 26 articles encompassing 242 patients who had undergone surgical correction for tibia malunion. A total of 19 patients suffered from complications. Methods of treatment included osteotomies, with plate and screws, external fixator, angled blade plate, intramedullary nails, Ilizarov fixator, Taylor Spatial Frame, Precise nail, and total knee arthroplasty. Restoring alignment and the articular surface led to overwhelmingly positive patient outcomes. Conclusions: Tibial malunions take many forms, and as such, there are many approaches to correcting deformities. The literature supports the following radiological parameters to diagnose tibial malunion: 5−10 degrees angulation, 1−2 cm shortening, 10−15 degrees internal rotation, and 10−20 degrees external rotation. Surgical plans should be customized to each individual patient, as there are many approaches to tibial malunion that have been shown to be successful in delivering excellent clinical outcomes.