Epoxy and Bio-Based Epoxy Carbon Fiber Twill Composites: Comparison of the Quasi-Static Properties

In recent years, interest in sustainability has significantly increased in many industrial sectors. Sustainability can be achieved with both lightweight design and eco-friendly manufacturing processes. For example, concerns on the use of thermoset composite materials, with a lightweight design and a high specific strength, have arisen, since thermoset resins are not fully recyclable and are mainly petrol based. A possible solution to this issue is the replacement of the thermoset matrix with a recyclable or renewable matrix, such as bio-based resin. However, the mechanical properties of composites made with bio-based resin should be carefully experimentally assessed to guarantee a safe design and the structural integrity of the components. In this work, the quasi-static mechanical properties of composite specimens (eight layers of carbon fiber fabric) made with commercially available epoxy and a bio-based epoxy resins (31% bio content) are compared. Tensile tests on the investigated resins and tensile, compression, shear and flexural tests have been carried out on composite laminates manufactured with the two investigated resins. A finite element model has been calibrated in the LS-Dyna environment using the experimentally assessed mechanical properties. The experimental results have proven that the two composites showed similar quasi-static properties, proving that bio-based composite materials can be reliably employed as a substitute for epoxy resins without affecting the structural integrity of the component but lowering their carbon footprint.

Open Rigid Internal Fixation of Low-Neck Condylar Fractures of the Mandible: Mechanical Comparison of 16 Plate Designs

BACKGROUND

In the literature, no information on plates for low-neck mandibular condylar osteosynthesis can be found, despite the fact that 30 plate designs have already been published. The aim of this study was to compare any dedicated plates for possible use in low-neck condylar fracture osteosynthesis.

METHODS

The force required for 1-mm displacement of the fixed fracture fragments and incidents of screw loosening were recorded on polyurethane mandibles among 16 designs of titanium plates fixed by 6-mm screws in a 2.0 system.

RESULTS

Double-straight plate fixation was the mechanical gold standard (15.2 ± 3.5 N), followed by A-shape Condylar Plates (14.9 ± 2.1 N), X-shape Condylar Plates (14.2 ± 1.3 N) and Auto Repositioning Plates (11.8 ± 2.4 N). Screw loosening was uncommon, as a minimum of three screws were placed into the condylar part. Fewer screws were lost from the ramus part of the fixation if the plate was attached to the condylar part by three screws. Often, the stability of the ramus screws was lost when there were only two fixing screws in the condyle (p < 0.001).

CONCLUSIONS

It is advisable to consider the mechanical advantages as one decides which plate to choose for open rigid internal fixation in low-neck condylar fractures, or to only be aware of the significant differences in mobility within the fracture line after fixation with different dedicated plates.