Defects Engineered Monolayer MoS2 for Improved Hydrogen Evolution Reaction

MoS2 is a promising and low-cost material for electrochemical hydrogen production due to its high activity and stability during the reaction. However, the efficiency of hydrogen production is limited by the amount of active sites, for example, edges, in MoS2. Here, we demonstrate that oxygen plasma exposure and hydrogen treatment on pristine monolayer MoS2 could introduce more active sites via the formation of defects within the monolayer, leading to a high density of exposed edges and a significant improvement of the hydrogen evolution activity. These as-fabricated defects are characterized at the scale from macroscopic continuum to discrete atoms. Our work represents a facile method to increase the hydrogen production in electrochemical reaction of MoS2 via defect engineering, and helps to understand the catalytic properties of MoS2.

The responses to surface wettability gradients induced by chitosan nanofilms on microtextured titanium mediated by specific integrin receptors

Microtexture and chemistry of implant surfaces are important variables for modulating cellular responses. Surface chemistry and wettability are connected directly. While each of these surface properties can influence cell response, it is difficult to decouple their specific contributions. To address this problem, the aims of this study were to develop a surface wettability gradient with a specific chemistry without altering micron scale roughness and to investigate the role of surface wettability on osteoblast response. Microtextured sandblasted/acid-etched (SLA, Sa = 3.1 μm) titanium disks were treated with oxygen plasma to increase reactive oxygen density on the surface. At 0, 2, 6, 10, and 24 h after removing them from the plasma, the surfaces were coated with chitosan for 30 min, rinsed and dried. Modified SLA surfaces are denoted as SLA/h in air prior to coating. Surface characterization demonstrated that this process yielded differing wettability (SLA0 < SLA2 < SLA10 < SLA24) without modifying the micron scale features of the surface. Cell number was reduced in a wettability-dependent manner, except for the most water-wettable surface, SLA24. There was no difference in alkaline phosphatase activity with differing wettability. Increased wettability yielded increased osteocalcin and osteoprotegerin production, except on the SLA24 surfaces. mRNA for integrins α1, α2, α5, β1, and β3 was sensitive to surface wettability. However, surface wettability did not affect mRNA levels for integrin α3. Silencing β1 increased cell number with reduced osteocalcin and osteoprotegerin in a wettability-dependent manner. Surface wettability as a primary regulator enhanced osteoblast differentiation, but integrin expression and silencing β1 results indicate that surface wettability regulates osteoblast through differential integrin expression profiles than microtexture does. The results may indicate that both microtexture and wettability with a specific chemistry have important regulatory effects on osseointegration. Each property had different effects, which were mediated by different integrin receptors.

Influence of Surfactant Bilayers on the Refractive Index Sensitivity and Catalytic Properties of Anisotropic Gold Nanoparticles

Shape-controlled synthesis of gold nanoparticles generally involves the use of surfactants, typically cetyltrimethylammonium (CTAX, X = Cl(-) , Br(-)), to regulate the nucleation growth process and to obtain colloidally stable nanoparticles. The surfactants adsorb on the nanoparticle surface making further functionalization difficult and therefore limit their use in many applications. Herein, the influence of CTAX on nanoparticle sensitivity to local dielectric environment changes is reported. It is shown, both experimentally and theoretically, that the CTAX bilayer significantly reduces the refractive index (RI) sensitivity of anisotropic gold nanoparticles such as nanocubes and concave nanocubes, nanorods, and nanoprisms. The RI sensitivity can be increased by up to 40% by removing the surfactant layer from nanoparticles immobilized on a solid substrate using oxygen plasma treatment. This increase compensates for the otherwise problematic decrease in RI sensitivity caused by the substrate effect. Moreover, the removal of the surfactants both facilitates nanoparticle biofunctionalization and significantly improves their catalytic properties. The strategy presented herein is a simple yet effective universal method for enhancing the RI sensitivity of CTAX-stabilized gold nanoparticles and increasing their potential as transducers in nanoplasmonic sensors, as well as in catalytic and biomedical applications.

Enhanced Hydrophilicity and Biocompatibility of Dental Zirconia Ceramics by Oxygen Plasma Treatment

Surface properties play a critical role in influencing cell responses to a biomaterial. The objectives of this study were (1) to characterize changes in surface properties of zirconia (ZrO₂) ceramic after oxygen plasma treatment; and (2) to determine the effect of such changes on biological responses of human osteoblast-like cells (MG63). The results indicated that the surface morphology was not changed by oxygen plasma treatment. In contrast, oxygen plasma treatment to ZrO₂ not only resulted in an increase in hydrophilicity, but also it retained surface hydrophilicity after 5-min treatment time. More importantly, surface properties of ZrO₂ modified by oxygen plasma treatment were beneficial for cell growth, whereas the surface roughness of the materials did not have a significant efficacy. It is concluded that oxygen plasma treatment was certified to be effective in modifying the surface state of ZrO₂ and has the potential in the creation and maintenance of hydrophilic surfaces and the enhancement of cell proliferation and differentiation.

Layer Control of WSe2 via Selective Surface Layer Oxidation

We report Raman and photoluminescence spectra of mono- and few-layer WSe2 and MoSe2 taken before and after exposure to a remote oxygen plasma. For bilayer and trilayer WSe2, we observe an increase in the photoluminescence intensity and a blue shift of the photoluminescence peak positions after oxygen plasma treatment. The photoluminescence spectra of trilayer WSe2 exhibit features of a bilayer after oxygen plasma treatment. Bilayer WSe2 exhibits features of a monolayer, and the photoluminescence of monolayer WSe2 is completely absent after the oxygen plasma treatment. These changes are observed consistently in more than 20 flakes. The mechanism of the changes observed in the photoluminescence spectra of WSe2 is due to the selective oxidation of the topmost layer. As a result, N-layer WSe2 is reduced to N-1 layers. Raman spectra and AFM images taken from the WSe2 flakes before and after the oxygen treatment corroborate these findings. Because of the low kinetic energy of the oxygen radicals in the remote oxygen plasma, the oxidation is self-limiting. By varying the process duration from 1 to 10 min, we confirmed that the oxidation will only affect the topmost layer of the WSe2 flakes. X-ray photoelectron spectroscopy shows that the surface layer WOx of the sample can be removed by a quick dip in KOH solution. Therefore, this technique provides a promising way of controlling the thickness of WSe2 layer by layer.

3D-Printed Poly(ε-Caprolactone)/Hydroxyapatite Scaffolds Modified with Alkaline Hydrolysis Enhance Osteogenesis In Vitro

The 3D-printed bioactive ceramic incorporated Poly(ε-caprolactone) (PCL) scaffolds show great promise as synthetic bone graft substitutes. However, 3D-printed scaffolds still lack adequate surface properties for cells to be attached to them. In this study, we modified the surface characteristics of 3D-printed poly(ε-caprolactone)/hydroxyapatite scaffolds using O2 plasma and sodium hydroxide. The surface property of the alkaline hydrolyzed and O2 plasma-treated PCL/HA scaffolds were evaluated using field-emission scanning microscopy (FE-SEM), Alizarin Red S (ARS) staining, and water contact angle analysis, respectively. The in vitro behavior of the scaffolds was investigated using human dental pulp-derived stem cells (hDPSCs). Cell proliferation of hDPSCs on the scaffolds was evaluated via immunocytochemistry (ICC) and water-soluble tetrazolium salt (WST-1) assay. Osteogenic differentiation of hDPSCs on the scaffolds was further investigated using ARS staining and Western blot analysis. The result of this study shows that alkaline treatment is beneficial for exposing hydroxyapatite particles embedded in the scaffolds compared to O2 plasma treatment, which promotes cell proliferation and differentiation of hDPSCs.

Nanoporous Silver Film Fabricated by Oxygen Plasma: A Facile Approach for SERS Substrates

Nanoporous metal films are promising substrates for surfaced-enhanced Raman scattering (SERS) measurement, owing to their homogeneity, large surface area, and abundant hot-spots. Herein, a facile procedure was developed to fabricate nanoporous Ag film on various substrate surfaces. Thermally deposited Ag film was first treated with O2 plasma, resulting in porous Ag/AgxO film (AgxO-NF) with nanoscale feature. Sodium citrate was then used to reduce AgxO to Ag, forming nanoporous Ag film (AgNF) with similar morphology. The AgNF substrate demonstrates 30-fold higher Raman intensity than Ag film over polystyrene nanospheres (d = 600 nm) using 4-mercaptobenzoic acid (4-MBA) as the sensing molecule. Comparing with ordinary Raman measurement on 4-MBA solution, an enhancement factor of ∼6 × 10(6) was determined for AgNF. The AgNF substrate was evaluated for benzoic acid, 4-nitrophenol, and 2-mercaptoethanesulfonate, showing high SERS sensitivity for chemicals that bind weakly to Ag surface and molecules with relatively small Raman cross section at micromolar concentration. In addition to its simplicity, the procedure can be applied to various materials such as transparency film, filter paper, hard polystyrene film, and aluminum foil, revealing similar Raman sensitivity. By testing the durability of the substrate, we found that the AgxO films can be stored in ambient conditions for more than 90 days and still deliver the same SERS intensity if the films are treated with sodium citrate before use. These results demonstrate the advantage of the proposed approach for mass production of low-cost, sensitive, and durable SERS substrates. The transferable nature of these AgNF to different flexible surfaces also allows their easy integration with other sensing schemes.

Interface Engineering of Solution-Processed Hybrid Organohalide Perovskite Solar Cells

Engineering the interface between the perovskite absorber and the charge-transporting layers has become an important method for improving the charge extraction and open-circuit voltage ( V_OC) of hybrid perovskite solar cells. Conjugated polymers are particularly suited to form the hole-transporting layer, but their hydrophobicity renders it difficult to solution-process the perovskite absorber on top. Herein, oxygen plasma treatment is introduced as a simple means to change the surface energy and work function of hydrophobic polymer interlayers for use as p-contacts in perovskite solar cells. We find that upon oxygen plasma treatment, the hydrophobic surfaces of different prototypical p-type polymers became sufficiently hydrophilic to enable subsequent perovskite junction processing. In addition, the oxygen plasma treatment also increased the ionization potential of the polymer such that it became closer to the valance band energy of the perovskite. It was also found that the oxygen plasma treatment could increase the electrical conductivity of the p-type polymers, facilitating more efficient charge extraction. On the basis of this concept, inverted MAPbI₃ perovskite devices with different oxygen plasma-treated polymers such as P3HT, P3OT, polyTPD, or PTAA were fabricated with power conversion efficiencies of up to 19%.

Two-Step Process To Create "Roll-Off" Superamphiphobic Paper Surfaces

Surface modification of cellulose-based paper, which displays roll-off properties for water and oils (surface tension ≥23.8 mN·m^-1) and good repellency toward n-heptane (20.1 mN·m^-1), is reported. Droplets of water, diiodomethane, motor oil, hexadecane, and decane all "bead up", i.e., exhibit high contact angles, and roll off the treated surface under the influence of gravity. Unlike widely used approaches that rely on the deposition of nanoparticles or electrospun nanofibers to create superamphiphobic surfaces, our method generates a hierarchical structure as an inherent property of the substrate and displays good adhesion between the film and substrate. The two-step combination of plasma etching and vapor deposition used in this study enables fine-tuning of the nanoscale roughness and thereby facilitates enhanced fundamental understanding of the effect of micro- and nanoscale roughness on the paper wetting properties. The surfaces maintain their "roll-off" properties after dynamic impact tests, demonstrating their mechanical robustness. Furthermore, the superamphiphobic paper has high gas permeability due to pore-volume enhancement by plasma etching but maintains the mechanical flexibility and strength of untreated paper, despite the presence of nanostructures. The unique combination of the chemical and physical properties of the resulting superamphiphobic paper is of practical interest for a range of applications such as breathable and disposable medical apparel, antifouling biomedical devices, antifingerprint paper, liquid packaging, microfluidic devices, and medical testing strips through a simple surface etching plus coating process.

Enhanced Protein Immobilization on Polymers-A Plasma Surface Activation Study

Over the last years, polymers have gained great attention as substrate material, because of the possibility to produce low-cost sensors in a high-throughput manner or for rapid prototyping and the wide variety of polymeric materials available with different features (like transparency, flexibility, stretchability, etc.). For almost all biosensing applications, the interaction between biomolecules (for example, antibodies, proteins or enzymes) and the employed substrate surface is highly important. In order to realize an effective biomolecule immobilization on polymers, different surface activation techniques, including chemical and physical methods, exist. Among them, plasma treatment offers an easy, fast and effective activation of the surfaces by micro/nanotexturing and generating functional groups (including carboxylic acids, amines, esters, aldehydes or hydroxyl groups). Hence, here we present a systematic and comprehensive plasma activation study of various polymeric surfaces by optimizing different parameters, including power, time, substrate temperature and gas composition. Thereby, the highest immobilization efficiency along with a homogenous biomolecule distribution is achieved with a 5-min plasma treatment under a gas composition of 50% oxygen and nitrogen, at a power of 1000 W and a substrate temperature of 80 °C. These results are also confirmed by different surface characterization methods, including SEM, XPS and contact angle measurements.

Oxygen-Plasma-Assisted Enhanced Acetone-Sensing Properties of ZnO Nanofibers by Electrospinning

In this Article, ZnO nanofibers were prepared by electrospinning. The as-prepared ZnO electrospun fibers were treated with plasma. The morphology, structure, and element content of the ZnO nanofibers greatly changed after treatment with different plasmas. The test results indicated that the acetone-sensing performance was remarkably improved for oxygen-plasma-assisted ZnO nanofibers. Furthermore, the density function theory (DFT) calculation results revealed that the acetone adsorption energy of ZnO nanofibers treated with oxygen plasma was 2 times greater than that of untreated ZnO nanofibers, and the electrons transferred between ZnO nanofibers and acetone molecules produced a more remarkable change in electronic structure for the oxygen-plasma-treated ZnO nanofibers. Our work demonstrates that the oxygen plasma treatment method can help improve the acetone-sensing performance of ZnO nanofibers.

Uniform High-k Amorphous Native Oxide Synthesized by Oxygen Plasma for Top-Gated Transistors

The integration of high-k gate dielectrics with two-dimensional (2D) semiconducting channel materials is essential for high-performance and low-power electronics. However, the conformal deposition of a uniform high-k dielectric with sub-1 nm equivalent oxide thickness (EOT) and high interface quality on high-mobility 2D semiconductors is still challenging. Here, we report a facile approach to synthesize a uniform high-k (ε_r ∼ 22) amorphous native oxide Bi₂SeO_x on the high-mobility 2D semiconducting Bi₂O₂Se using O₂ plasma at room temperature. The conformal native oxide can directly serve as gate dielectrics with EOT of ∼0.9 nm, while the original properties of underlying 2D Bi₂O₂Se is preserved. Furthermore, high-resolution area-selective oxidation of Bi₂O₂Se is achieved to fabricate discrete electronic components. This facile integration of a high-mobility 2D semiconductor and its high-k native oxide holds high promise for next-generation nanoelectronics.

Multifunctional PLGA/Parylene C Coating for Implant Materials: An Integral Approach for Biointerface Optimization

Functionalizing implant surfaces is critical for improving their performance. An integrated approach was employed to develop a multifunctional implant coating based on oxygen plasma-modified parylene C and drug-loaded, biodegradable poly(dl-lactide-co-glycolide) (PLGA). The key functional attributes of the coating (i.e., anti-corrosion, biocompatible, anti-infection, and therapeutic) were thoroughly characterized at each fabrication step by spectroscopic, microscopic, and biologic methods and at different scales, ranging from molecular, through the nano- and microscales to the macroscopic scale. The chemistry of each layer was demonstrated separately, and their mutual affinity was shown to be indispensable for the development of versatile coatings for implant applications.

Enhanced Photoluminescence of Multiple Two-Dimensional van der Waals Heterostructures Fabricated by Layer-by-Layer Oxidation of MoS2

Monolayer transition metal dichalcogenides (TMDs) are promising for optoelectronics because of their high optical quantum yield and strong light-matter interaction. In particular, the van der Waals (vdW) heterostructures consisting of monolayer TMDs sandwiched by large gap hexagonal boron nitride have shown great potential for novel optoelectronic devices. However, a complicated stacking process limits scalability and practical applications. Furthermore, even though lots of efforts, such as fabrication of vdW heterointerfaces, modification of the surface, and structural phase transition, have been devoted to preserve or modulate the properties of TMDs, high environmental sensitivity and damage-prone characteristics of TMDs make it difficult to achieve a controllable technique for surface/interface engineering. Here, we demonstrate a novel way to fabricate multiple two-dimensional (2D) vdW heterostructures consisting of alternately stacked MoS₂ and MoO_x with enhanced photoluminescence (PL). We directly oxidized multilayer MoS₂ to a MoO_x/1 L-MoS₂ heterostructure with atomic layer precision through a customized oxygen plasma system. The monolayer MoS₂ covered by MoO_x showed an enhanced PL intensity 3.2 and 6.5 times higher in average than the as-exfoliated 1 L- and 2 L-MoS₂ because of preserved crystallinity and compensated dedoping by MoO_x. By using layer-by-layer oxidation and transfer processes, we fabricated the heterostructures of MoO_x/MoS₂/MoO_x/MoS₂, where the MoS₂ monolayers are separated by MoO_x. The heterostructures showed the multiplied PL intensity as the number of embedded MoS₂ layers increases because of suppression of the nonradiative trion formation and interlayer decoupling between stacked MoS₂ layers. Our work shows a novel way toward the fabrication of 2D material-based multiple vdW heterostructures and our layer-by-layer oxidation process is beneficial for the fabrication of high performance 2D optoelectronic devices.

A fiber optic catalytic sensor for neutral atom measurements in oxygen plasma

The presented sensor for neutral oxygen atom measurement in oxygen plasma is a catalytic probe which uses fiber optics and infrared detection system to measure the gray body radiation of the catalyst. The density of neutral atoms can be determined from the temperature curve of the probe, because the catalyst is heated predominantly by the dissipation of energy caused by the heterogeneous surface recombination of neutral atoms. The advantages of this sensor are that it is simple, reliable, easy to use, noninvasive, quantitative and can be used in plasma discharge regions. By using different catalyst materials the sensor can also be applied for detection of neutral atoms in other plasmas. Sensor design, operation, example measurements and new measurement procedure for systematic characterization are presented.

Preparation and Characterization of Antibacterial Polypropylene Meshes with Covalently Incorporated β-Cyclodextrins and Captured Antimicrobial Agent for Hernia Repair

Polypropylene (PP) light weight meshes are commonly used as hernioplasty implants. Nevertheless, the growth of bacteria within textile knitted mesh intersections can occur after surgical mesh implantation, causing infections. Thus, bacterial reproduction has to be stopped in the very early stage of mesh implantation. Herein, novel antimicrobial PP meshes grafted with β-CD and complexes with triclosan were prepared for mesh infection prevention. Initially, PP mesh surfaces were functionalized with suitable cold oxygen plasma. Then, hexamethylene diisocyanate (HDI) was successfully grafted on the plasma-activated PP surfaces. Afterwards, β-CD was connected with the already HDI reacted PP meshes and triclosan, serving as a model antimicrobial agent, was loaded into the cyclodextrin (CD) cavity for desired antibacterial functions. The hydrophobic interior and hydrophilic exterior of β-CD are well suited to form complexes with hydrophobic host guest molecules. Thus, the prepared PP mesh samples, CD-TCL-2 and CD-TCL-6 demonstrated excellent antibacterial properties against Staphylococcus aureus and Escherichia coli that were sustained up to 11 and 13 days, respectively. The surfaces of chemically modified PP meshes showed dramatically reduced water contact angles. Moreover, X-ray diffractometer (XRD), differential scanning calorimeter (DSC), and Thermogravimetric (TGA) evidenced that there was no significant effect of grafted hexamethylene diisocyanate (HDI) and CD on the structural and thermal properties of the PP meshes.

Nanostructured polystyrene well plates allow unbiased high-throughput characterization of circulating tumor cells

Rapid, reliable and unbiased circulating tumor cell (CTC) isolation and molecular characterization methods are urgently required for implementation in routine clinical diagnostic and prognostic procedures. We report on the development of a novel unbiased CTC detection approach that combines high-throughput automated microscopy with a simple yet efficient approach for achieving a high level of tumor cell binding in standard tissue culture polystyrene (PS) well plates. A single 5 min high-power oxygen plasma treatment was used to create homogeneous nanoscale roughness on standard PS tissue culture plates and, in turn, drastically enhance the binding of a range of tumor cells. After physical adsorption of an adlayer of poly-l-lysine, binding yields above 97% were obtained at 2 h for all tumor cell lines used in the study. Morphological analysis of the cells confirmed strong adherence to the nanorough PS substrates. Clinically relevant concentrations of a highly metastatic breast cancer cell line, used as model for CTCs, could be reliably detected among blood cells on the nanorough polystyrene plates using an automated microscopy system. The approach was then successfully used to detect CTCs in the blood of a stage IIIc colorectal cancer patient. By combining the high binding abilities of nanorough PS well plates with the high-throughput nature of high-content analysis systems, this methodology has great potential toward enabling unbiased routine clinical analysis of CTCs. It could be applied, once clinically validated, in any clinical center equipped with an automated microscopy facility at a fraction of the cost of current CTC isolation technologies.

Effect of Oxygen Plasma on Sprout and Root Growth, Surface Morphology and Yield of Garlic

Depending on the climate, garlic can be planted either in the fall or spring for a harvest in the summer, but spring planting might require the strengthening of the plant by external techniques. We have used low pressure, inductively coupled, radio frequency oxygen plasma for the treatment of peeled garlic cloves of a spring-planted Slovenian autochthonous cultivar. The aim of the study was to assess the effects of plasma treatment on garlic clove shoot and root growth and, ultimately, the yield. The roles of surface chemistry, surface morphology, and water uptake in these effects were also evaluated. The plasma treatment of cloves induced increases in water uptake. The increases were explained by changes in surface morphology that were determined by using scanning electron microscopy (SEM) and atomic force microscopy (AFM). Nanostructured epicuticular wax structures appeared at the cuticle surface. The optimal treatment parameters accelerated root growth, but not shoot growth, in a laboratory setting. After growth in the field, the trends indicated that plant height and dried bulb mass increase, but the improvements were not statistically significant.

Induced Photonic Response of ZnO Nanorods Grown on Oxygen Plasma-Treated Seed Crystallites

We examined the influence of O₂ plasma treatment for the ZnO seed layer (SL) crystallites on the material characteristics of ZnO nanorods (NRs) synthesized by the hydrothermal method. Diode photocurrent and photo-response transient characteristics of the p-Si/n-ZnO-NR heterojunction-based ultraviolet (UV) photodetectors were also examined according to the plasma treatment for the SLs. The superior optical properties of NRs were measured from the photoluminescence by exhibiting 4.6 times greater near-band edge emission when grown on the O₂-plasma-treated SL. The degree of (002) orientation of the NR crystals was improved from 0.67 to 0.95, as revealed by X-ray diffraction analysis, and a higher NR surface density of ~80 rods/μm² with a smaller mean diameter of 65 nm were also observed by the SL modification using plasma-treatment. It was shown by X-ray photo-electron spectroscopy that this improvement of NR crystalline quality was due to the recovery of stoichiometric oxygen with significant reduction of oxygenated impurities in the SL crystals and the subsequent low-energy growth mode for the NRs. UV PDs fabricated by the proposed SL plasma treatment technique showed significantly enhanced UV-to-dark current ratio from 2.0 to 83.7 at a forward bias of +5 V and faster photo-response characteristics showing the reduction in recovery time from 16 s to 9 s.

Selective Electron Beam Patterning of Oxygen-Doped WSe2 for Seamless Lateral Junction Transistors

Surface charge transfer doping (SCTD) using oxygen plasma to form a p-type dopant oxide layer on transition metal dichalcogenide (TMDs) is a promising doping technique for 2D TMDs field-effect transistors (FETs). However, patternability of SCTD is a key challenge to effectively switch FETs. Herein, a simple method to selectively pattern degenerately p-type (p+ )-doped WSe2 FETs via electron beam (e-beam) irradiation is reported. The effect of the selective e-beam irradiation is confirmed by the gate-tunable optical responses of seamless lateral p+ -p diodes. The OFF state of the devices by inducing trapped charges via selective e-beam irradiation onto a desired channel area in p+ -doped WSe2 , which is in sharp contrast to globally p+ -doped WSe2 FETs, is realized. Selective e-beam irradiation of the PMMA-passivated p+ -WSe2 enables accurate control of the threshold voltage (Vth ) of WSe2 devices by varying the pattern size and e-beam dose, while preserving the low contact resistance. By utilizing hBN as the gate dielectric, high-performance WSe2 p-FETs with a saturation current of -280 µA µm-1 and on/off ratio of 109 are achieved. This study's technique demonstrates a facile approach to obtain high-performance TMD p-FETs by e-beam irradiation, enabling efficient switching and patternability toward various junction devices.

Self-Terminated Surface Monolayer Oxidation Induced Robust Degenerate Doping in MoTe2 for Low Contact Resistance

We introduce an effective method to degenerately dope MoTe₂ by oxidizing its surface into the p-dopant MoO_x in oxygen plasma. As a self-terminated process, the oxidation is restricted only in the very top layer, therefore offering us an easy and efficient control. The degenerate p-doping with the hole concentration of 2.5 × 10¹³ cm^-2 can be obtained by applying a ∼300 s O₂ plasma treatment. Using the degenerately doped MoTe₂, we demonstrate a record low contact resistance of 0.6 kΩ μm for MoTe₂. Our measurement highlights an excellent stability for the plasma-doped MoTe₂. The doped characteristics are robust with no significant degradation even after a one-year exposure to the air. The oxygen plasma doping technique is compatible with the conventional semiconductor processes, which can be utilized to realize high-performance MoTe₂ field-effect transistors (FETs) or tunnel FETs in the future.

A Systematic Study of Plasma Activation of Silicon Surfaces for Self Assembly

We study the plasma activation systematically in an attempt to simplify and optimize the formation of hydrophilic silicon (Si) surface critical for self-assembly of nanostructures that typically uses piranha solution, a high molarity cocktail of sulfuric acid and hydrogen peroxide at elevated temperatures. In the proposed safer and simpler approach, O2 plasma is used under optimized process conditions in a capacitively coupled parallel-plate chamber to induce strong hydrophilic behavior on silicon surfaces associated with the formation of suboxide groups. Surface activation is validated and studied via contact angle measurements as well as XPS spectra and consequently optimized using a novel atomic force spectroscopy approach, which can streamline characterization. It is found that plasma power around 100 W and exposure duration of ∼65 s are the most effective parameters to enhance surface activation for the reactive ion etcher system used. Other optimum plasma process conditions for pressure and flow-rate are also reported along with temporal development of activation, which peaks within 1 h and wears off in 24 h scale in air. The applicability of the plasma approach to nanoassembly process was demonstrated using simple drop coating and spinning of polystyrene (d < 500 nm, 2.5-4.5% w/v) and inkjet printing on polydimethylsiloxane.

Blood compatibility and cell response improvement of poly glycerol sebacate/poly lactic acid scaffold for vascular graft applications

Plasma surface modification is one of the new methods for improving the surface properties of the scaffold and accelerating tissue regeneration. The aim of this study was to create poly glycerol sebacate/poly lactic acid (PGS/PLA) composite scaffold by electrospun method and modified the scaffold by oxygen plasma for use as a vascular graft. Plasma surface modified PGS/PLA scaffold morphology study showed relatively uniform fibers with an average diameter of 637 ± 149.4 nm and porosity of 82%. The mechanical evaluation of the PGS/PLA scaffold showed properties close to the natural vessels. Atomic force microscopy images exhibited an increase in the roughness of the scaffold after plasma surface modification; however, hemocompatibility studies revealed that it had no adverse effect on blood compatibility. Wettability studies revealed the superhydrophilic property of the modified scaffold (contact angle near to zero). Besides, the human umbilical vein endothelial cells proliferation and adhesion were improved significantly. Obtaining mechanical properties near to the natural vessels due to the suitable composition and significant improvement in blood compatibility and cell growth make the modified PGS/PLA composite a suitable candidate for vascular tissue regeneration.

Oxygen Plasma Treated-Electrospun Polyhydroxyalkanoate Scaffolds for Hydrophilicity Improvement and Cell Adhesion

Poly(hydroxyalkanoates) (PHAs) with differing material properties, namely, the homopolymer poly(3-hydroxybutyrate), P(3HB), the copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate), P(3HB-co-3HV), with a 3HV content of 25 wt.% and a medium chain length PHA, and mcl-PHA, mainly composed of 3-hydroxydecanoate, were studied as scaffolding material for cell culture. P(3HB) and P(3HB-co-3HV) were individually spun into fibers, as well as blends of the mcl-PHA with each of the scl-PHAs. An overall biopolymer concentration of 4 wt.% was used to prepare the electrospinning solutions, using chloroform as the solvent. A stable electrospinning process and good quality fibers were obtained for a solution flow rate of 0.5 mL h⁻¹, a needle tip collector distance of 20 cm and a voltage of 12 kV for P(3HB) and P(3HB-co-3HV) solutions, while for the mcl-PHA the distance was increased to 25 cm and the voltage to 15 kV. The scaffolds’ hydrophilicity was significantly increased under exposure to oxygen plasma as a surface treatment. Complete wetting was obtained for the oxygen plasma treated scaffolds and the water uptake degree increased in all treated scaffolds. The biopolymers crystallinity was not affected by the electrospinning process, while their treatment with oxygen plasma decreased their crystalline fraction. Human dermal fibroblasts were able to adhere and proliferate within the electrospun PHA-based scaffolds. The P(3HB-co-3HV): mcl-PHA oxygen plasma treated scaffold highlighted the most promising results with a cell adhesion rate of 40 ± 8%, compared to 14 ± 4% for the commercial oxygen plasma treated polystyrene scaffold Alvetex^TM. Scaffolds based on P(3HB-co-3HV): mcl-PHA blends produced by electrospinning and submitted to oxygen plasma exposure are therefore promising biomaterials for the development of scaffolds for tissue engineering.

Direct Patterning of p-Type-Doped Few-layer WSe2 Nanoelectronic Devices by Oxidation Scanning Probe Lithography

Direct, robust, and high-resolution patterning methods are needed to downscale the lateral size of two-dimensional materials to observe new properties and optimize the overall processing of these materials. In this work, we report a fabrication process where the initial microchannel of a few-layer WSe₂ field-effect transistor is treated by oxygen plasma to form a self-limited oxide layer on top of the flake. This thin oxide layer has a double role here. First, it induces the so-called p-doping effect in the device. Second, it enables the fabrication of oxide nanoribbons with controlled width and depth by oxidation scanning probe lithography (o-SPL). After the removal of the oxides by deionized H₂O etching, a nanoribbon-based field-effect transistor is produced. Oxidation SPL is a direct writing technique that minimizes the use of resists and lithographic steps. We have applied this process to fabricate a 5 nm thick WSe₂ field-effect transistor, where the channel consists in an array of 5 parallel 350 nm half-pitch nanoribbons. The electrical measurements show that the device presents an improved conduction level compared to the starting thin-layer transistor and a positive threshold voltage shift associated to the p-doping treatment. The method enables to pattern devices with sub-50 nm feature sizes. We have patterned an array of 10 oxide nanowires with 36 nm half-pitch by oxidation SPL.