Resistivity detection of perfluoroalkyl substances with fluorous polyaniline in an electrical lateral flow sensor

Perfluoroalkyl substances (PFAS), known as "forever chemicals," are a growing concern in the sphere of human and environmental health. In response, rapid, reproducible, and inexpensive methods for PFAS detection in the environment and home water supplies are needed. We have developed a simple and inexpensive perfluoroalkyl acid detection method based on an electrically read lateral flow assay (e-LFA). Our method employs a fluorous surfactant formulation with undoped polyaniline (F-PANI) fabricated to create test lines for the lateral flow assay. In perfluoroalkyl acid sensing studies, an increase in conductivity of the F-PANI film is caused by acidification and doping of PANI. A conductivity enhancement by 104-fold can be produced by this method, and we demonstrate a limit of detection for perfluorooctanoic acid (PFOA) of 400 ppt and perfluorobutanoic acid of 200 ppt. This method for PFOA detection can be expanded for wide-scale environmental and at-home water testing.

Polymeric Membranes Doped with Halloysite Nanotubes Imaged using Proton Microbeam Microscopy

Polymeric membranes are useful tools for water filtration processes, with their performance strongly dependent on the presence of hydrophilic dopants. In this study, polyaniline (PANI)-capped aluminosilicate (halloysite) nanotubes (HNTs) are dispersed into polyether sulfone (PES), with concentrations ranging from 0.5 to 1.5 wt%, to modify the properties of the PES membrane. Both undoped and HNT-doped PES membranes are investigated in terms of wettability (static and time-dependent contact angle), permeance, mechanical resistance, and morphology (using scanning electron microscopy (SEM)). The higher water permeance observed for the PES membranes incorporating PANI-capped HNTs is, finally, assessed and discussed vis-à-vis the real distribution of HNTs. Indeed, the imaging and characterization in terms of composition, spatial arrangement, and counting of HNTs embedded within the polymeric matrix are demonstrated using non-destructive Micro Particle Induced X-ray Emission (µ-PIXE) and Scanning Transmission Ion Microscopy (STIM) techniques. This approach not only exhibits the unique ability to detect/highlight the distribution of HNTs incorporated throughout the whole thickness of polymer membranes and provide volumetric morphological information consistent with SEM imaging, but also overcomes the limits of the most common analytical techniques exploiting electron probes. These aspects are comprehensively discussed in terms of practical analysis advantages.

Surface Plasmon Resonance Sensitivity Enhancement Based on Protonated Polyaniline Films Doped by Aluminum Nitrate

Complex composite films based on polyaniline (PANI) doped hydrochloric acid (HCl) incorporated with aluminum nitrate (Al(NO₃)₃) on Au-layer were designed and synthesized as a surface plasmon resonance (SPR) sensing device. The physicochemical properties of (PANI-HCl)/Al(NO₃)₃ complex composite films were studied for various Al(NO₃)₃ concentrations (0, 2, 4, 8, 16, and 32 wt.%). The refractive index of the (PANI-HCl)/Al(NO₃)₃ complex composite films increased continuously as Al(NO₃)₃ concentrations increased. The electrical conductivity values increased from 5.10 µS/cm to 10.00 µS/cm as Al(NO₃)₃ concentration increased to 32 wt.%. The sensitivity of the SPR sensing device was investigated using a theoretical approach and experimental measurements. The theoretical system of SPR measurement confirmed that increasing Al(NO₃)₃ in (PANI-HCl)/Al(NO₃)₃ complex composite films enhanced the sensitivity from about 114.5 [Deg/RIU] for Au-layer to 159.0 [Deg/RIU] for Au-((PANI-HCl)/Al(NO₃)₃ (32 wt.%)). In addition, the signal-to-noise ratio for Au-layer was 3.95, which increased after coating by (PANI-HCl)/Al(NO₃)₃ (32 wt.%) complex composite layer to 8.82. Finally, we conclude that coating Au-layer by (PANI-HCl)/Al(NO₃)₃ complex composite films enhances the sensitivity of the SPR sensing device.

Cadmium Ions' Trace-Level Detection Using a Portable Fiber Optic-Surface Plasmon Resonance Sensor

Environmental pollution with cadmium (Cd) is a major concern worldwide, with prolonged exposure to this toxic heavy metal causing serious health problems, such as kidney damage, cancer, or cardiovascular diseases, only to mention a few. Herein, a gold-coated reflection-type fiber optic--surface plasmon resonance (Au-coated FO-SPR) sensor is manufactured and functionalized with (i) bovine serum albumin (BSA), (ii) chitosan, and (iii) polyaniline (PANI), respectively, for the sensitive detection of cadmium ions (Cd2+) in water. Then, the three sensor functionalization strategies are evaluated and compared one at a time. Out of these strategies, the BSA-functionalized FO-SPR sensor is found to be highly sensitive, exhibiting a limit of detection (LOD) for Cd2+ detection at nM level. Moreover, the presence of Cd2+ on the FO-SPR sensor surface was confirmed by the X-ray photoelectron spectroscopy (XPS) technique and also quantified consecutively for all the above-mentioned functionalization strategies. Hence, the BSA-functionalized FO-SPR sensor is sensitive, provides a rapid detection time, and is cheap and portable, with potential applicability for monitoring trace-level amounts of Cd within environmental or potable water.

Simultaneous Separation and Recovery of Gold and Copper from Electronic Waste Enabled by an Asymmetric Electrochemical System

Exploiting efficient strategies for the selective separation and extraction of valuable metals from e-waste is in urgent demand to offset the ever-increasing depletion of metal resources, satisfy the sustainable supply of metal resources, and reduce the environmental impact from toxic metals. Herein, an asymmetric electrochemical system, constructed by polyaniline (PANI) nanofibers grown on carbon cloth (CC) and CC as the respective counter and working electrodes, is presented for the simultaneous and selective extraction of gold and copper from e-waste leachate solution. Harnessing the established CC/PANI//CC system, CC/PANI as the anode electrode is capable of selectively and rapidly extracting gold with high efficiency, accompanied by excellent reusability. Meanwhile, cathodic CC electrode is found to achieve almost 100% recovery of copper at a voltage of -1.2 V. Furthermore, the feasibility of the proposed asymmetric electrochemical system is further exemplified in waste central processing unit (CPU) leaching solution, enabling to recover simultaneously gold and copper with high purity. This work will provide meaningful guidance for simultaneous separation and recovery of multiple valuable metals from real e-waste.

Polyaniline-Encapsulated Hollow Co-Fe Prussian Blue Analogue Nanocubes Modified on a Polypropylene Separator To Improve the Performance of Lithium-Sulfur Batteries

Recent studies of lithium-sulfur (Li-S) batteries have identified that a modified separator plays a critical role in challenging the capacity fading and shuttle effect of lithium polysulfides (LiPSs). Herein, we report a polyaniline-encapsulated hollow Co-Fe Prussian blue analogue (CFP@PANI) for separator modification. The open frame-like hollow CFP was synthesized via oriented attachment (OA). To improve the catalytic effect and electrical conductivity, PANI was coated on the synthesized CFP. The resulting CFP@PANI was applied on the conventional polypropylene (PP) separator (CFP@PANI-PP) with vacuum filtration. With a ketjen black/sulfur (KB/S) cathode with 66% of the sulfur load, the CFP@PANI-PP exhibited an initial capacity of 723.1 mAh g^-1 at a current density of 1 A g^-1. Furthermore, the CFP@PANI-PP showed stable cycling performance with 83.5% capacity retention after 100 cycles at 1 A g^-1. During the 100 cycles, each cycle maintained high coulombic efficiency above 99.5%, which indicates that the CFP@PANI-PP could inhibit LiPS migration to the anode side without a Li⁺ transport disturbance across the separator. Overall, the CFP@PANI-PP efficiently suppressed LiPSs, resulting in enhanced electrochemical performance. The current study provides useful insight into designing a nanostructure for separator modification of Li-S batteries.

Enhanced Storage Performance of PANI and PANI/Graphene Composites Synthesized in Protic Ionic Liquids

Polyaniline (PANI) was synthesized using oxidative polymerization in a mixture of water with pyrrolidinium hydrogen sulfate [Pyrr][HSO₄], which is a protic ionic liquid PIL. The obtained PANI (PANI/PIL) was compared with conventional PANI (PANI/HCl and PANI/HSO₄) in terms of their morphological, structural, and storage properties. The results demonstrate that the addition of this PIL to a polymerization medium leads to a fiber-like morphology, instead of a spherical-like morphology, of PANI/HSO₄ or an agglomerated morphology of PANI/HCl. In addition, PAN/PIL exhibits an improvement of the charge transfer kinetic and storage capability in H₂SO₄ 1 mol·L^-1, compared to PANI/HCl. The combination of PANI/PIL and graphene oxide (GO), on the other hand, was investigated by optimizing the PANI/GO weight ratio to achieve the nanocomposite material with the best performance. Our results indicate that the PANI/PIL/GO containing 16 wt% of GO material exhibits a high performance and stability (223 F·g^-1 at 10 A·g^-1 in H₂SO₄ 1 mol·L^-1, 4.9 Wh·Kg^-1, and 3700 W·Kg^-1 @ 10 A·g^-1). The obtained results highlight the beneficial role of PIL in building PANI and PANI/GO nanocomposites with excellent performances for supercapacitor applications.

Highly Sensitive Electrochemical Aptasensor for Detecting the VEGF165 Tumor Marker with PANI/CNT Nanocomposites

Sensing targeted tumor markers with high sensitivity provides vital information for the fast diagnosis and treatment of cancer patients. A vascular endothelial growth factor (VEGF165) have recently emerged as a promising biomarker of tumor cells. The electrochemical aptasensor is a promising tool for detecting VEGF165 because of its advantages such as a low cost and quantitative analysis. To produce a sensitive and stable sensor electrode, nanocomposites based on polyaniline (PANI) and carbon nanotube (CNT) have potential, as they provide for easy fabrication, simple synthesis, have a large surface area, and are suitable in biological environments. Here, a label-free electrochemical aptasensor based on nanocomposites of CNT and PANI was prepared for detecting VEGF165 as a tumor marker. The nanocomposite was assembled with immobilized VEGF165 aptamer as a highly sensitive VEGF165 sensor. It exhibited stable and wide linear detection ranges from 0.5 pg/mL to 1 μg/mL, with a limit of detection of 0.4 pg/mL because of the complementary effect of PANI/CNT. The fabricated aptasensor also exhibited good stability in biological conditions, selectivity, and reproducibility after several measurement times after the dissociation process. Thus, it could be applied for the non-invasive determination of VEGF, in biological fluid diagnosis kits, or in an aptamer-based biosensor platform in the near future.

In-Situ Iodine Doping Characteristics of Conductive Polyaniline Film Polymerized by Low-Voltage-Driven Atmospheric Pressure Plasma

In-situ iodine (I₂)-doped atmospheric pressure (AP) plasma polymerization is proposed, based on a newly designed AP plasma reactor with a single wire electrode that enables low-voltage-driven plasma polymerization. The proposed AP plasma reactor can proceed plasma polymerization at low voltage levels, thereby enabling an effective in-situ I₂ doping process by maintaining a stable glow discharge state even if the applied voltage increases due to the use of a discharge gas containing a large amount of monomer vapors and doping materials. The results of field-emission scanning electron microscopy (FE-SEM) and Fourier transformation infrared spectroscopy (FT-IR) show that the polyaniline (PANI) films are successfully deposited on the silicon (Si) substrates, and that the crosslinking pattern of the synthesized nanoparticles is predominantly vertically aligned. In addition, the in-situ I₂-doped PANI film fabricated by the proposed AP plasma reactor exhibits excellent electrical resistance without electrical aging behavior. The developed AP plasma reactor proposed in this study is more advantageous for the polymerization and in-situ I₂ doping of conductive polymer films than the existing AP plasma reactor with a dielectric barrier.

Facile Fabrication of an Ammonia-Gas Sensor Using Electrochemically Synthesised Polyaniline on Commercial Screen-Printed Three-Electrode Systems

Polyaniline (PANI) is a conducting polymer, widely used in gas-sensing applications. Due to its classification as a semiconductor, PANI is also used to detect reducing ammonia gas (NH3), which is a well-known and studied topic. However, easier, cheaper and more straightforward procedures for sensor fabrication are still the subject of much research. In the presented work, we describe a novel, more controllable, synthesis approach to creating NH3 PANI-based receptor elements. The PANI was electrochemically deposited via cyclic voltammetry (CV) on screen-printed electrodes (SPEs). The morphology, composition and surface of the deposited PANI layer on the Au electrode were characterised with electron microscopy, Fourier-transform infrared spectroscopy and profilometry. Prior to the gas-chamber measurement, the SPE was suitably modified by Au sputtering the individual connections between the three-electrode system, thus showing a feasible way of converting a conventional three-electrode electrochemical SPE system into a two-electrode NH3-gas detecting system. The feasibility of the gas measurements' characterisation was improved using the gas analyser. The gas-sensing ability of the PANI-Au-SPE was studied in the range 32-1100 ppb of NH3, and the sensor performed well in terms of repeatability, reproducibility and sensitivity.

Protonation-Induced Enhanced Optical-Light Photochromic Properties of an Inorganic-Organic Phosphomolybdic Acid/Polyaniline Hybrid Thin Film

A phosphomolybdic acid/polyaniline (PMoA/PANI) optical-light photochromic inorganic/organic hybrid thin film was successfully synthesized by protonation between the the multiprotonic acid phosphomolybdic acid (H₃PO₄·12MoO₃) and the conductive polymer polyaniline. The stable Keggin-type structure of PMoA was maintained throughout the process. Protonation and proton transfer successfully transformed the quinone structure of eigenstate PANI into the benzene structure of single-polarized PANI in the PMoA/PANI hybridized thin film, and proton transfer transformed the benzene structure of single-polarized PANI back to the quinone structure of eigenstate PANI in the PMoA/PANI hybrid thin film, as verified by Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The average distribution of PMoA/PANI was observed by atom force microscopy (AFM). Interestingly, protonation of PMoA caused PANI to trigger transformation of the quinone structure into the single-polarized benzene structure, which enhanced the electron delocalization ability and vastly enhanced the maximum light absorption of the PMoA/PANI hybrid thin film as confirmed by density functional theory (DFT), electrochemistry, and ultraviolet-visible spectroscopy (UV-Vis) studies. Under optical-light illumination, the pale-yellow PMoA/PANI hybrid thin film gradually turned deep blue, thus demonstrating a photochromic response, and reversible photochromism was also observed in the presence of hydrogen peroxide (H₂O₂) or oxygen (O₂). After 40 min of optical-light illumination, 36% of the Mo⁵⁺ species in PMoA was photoreduced via a protonation-induced proton transfer mechanism, and this proton transfer resulted in a structural change of PANI, as observed by XPS, generating a dominant structure with high maximum light absorption of 3.46, when compared with the literature reports.

Antimicrobial Properties of the Polyaniline Composites against Pseudomonas aeruginosa and Klebsiella pneumoniae

CuO, TiO_2, or SiO₂ was decorated on polyaniline (PANI) by a sonochemical method, and their antimicrobial properties were investigated for two common Gram-negative pathogens: Pseudomonas aeruginosa (PA) and Klebsiella pneumoniae (KP). Without PANI, CuO, TiO₂, or SiO₂ with a concentration of 220 µg/mL exhibited no antimicrobial activities. In contrast, PANI-CuO and PANI-TiO₂ (1 mg/mL, each) completely suppressed the PA growth after 6 h of exposure, compared to 12 h for the PANI-SiO₂ at the same concentration. The damage caused by PANI-SiO₂ to KP was less effective, compared to that of PANI-TiO₂ with the eradication time of 12 h versus 6 h, respectively. This bacterium was not affected by PANI-CuO. All the composites bind tightly to the negative groups of bacteria cell walls to compromise their regular activities, leading to the damage of the cell wall envelope and eventual cell lysis.

Fabrication of Nanocomposites Complexed with Gold Nanoparticles on Polyaniline and Application to Their Nerve Regeneration

Electrically conductive materials can stimulate stem cells through electric shock and thereby contribute to the regulation of cell proliferation and differentiation. Recently, polymer-metal complexes composed of polyaniline and gold nanoparticles have emerged as novel candidates for use in regenerative medicine. By mixing two different materials, such composites maximize the benefits while alleviating the disadvantages of using either material alone. Based on their excellent conductivity, these complexes can be applied to nerve regeneration using stem cells. In this study, we investigated a method for producing hybrid nanocomposites by complexing gold nanoparticles to polyaniline and tested the resultant composites in a model of nerve regeneration. We manipulated the shape, size, and electrical conductivity of the hybrid composites by compounding the component materials at various ratios. The most efficient nanocomposite was named conductive reinforced nanocomposites (CRNc's). When the CRNc was delivered directly to cells, no cytotoxicity was observed. After the intracellular delivery of the CRNc, the stem cells were electrically stimulated using an electroporator. As a result of performing mRNA-sequencing (Seq) analysis after electrical stimulation (ES) of the CRNc-internalized cells, it was confirmed that the CRNc-internalized cells have a pattern similar to that of the positive group-induced neuron cells. In particular, microtubule-associated protein 2 is more than twice that of the control group (negative control), and the nerve fiber protein is strongly expressed as in the positive control group. In addition, we verified that neural differentiation progressed by monitoring the growth of neurites from stem cells. Together, these findings show that the CRNc can be used to induce the formation of neuron-like cells by applying ES to stem cells.

Tailor-Made Specific Recognition of Cyromazine Pesticide Integrated in a Potentiometric Strip Cell for Environmental and Food Analysis

Screen-printed ion-selective electrodes were designed and characterized for the assessment of cyromazine (CYR) pesticide. A novel approach is to design tailor-made specific recognition sites in polymeric membranes using molecularly imprinted polymers for cyromazine (CR) determination (sensor I). Another sensor (sensor II) is the plasticized PVC membrane incorporating cyromazine/tetraphenyl borate ion association complex. The charge-transfer resistance and water layer reached its minimal by incorporating Polyaniline (PANI) solid-contact ISE. The designed electrodes demonstrated Nernstain response over a linear range 1.0 × 10-2-5.2 × 10-6 and 1.0 × 10-2-5.7 × 10-5 M with a detection limit 2.2 × 10-6 and 8.1 × 10-6 M for sensors I and II, respectively. The obtained slopes were 28.1 ± 2.1 (r2 = 0.9999) and 36.4 ± 1.6 (r2 = 0.9991) mV/decade, respectively. The results showed that the proposed electrodes have a fast and stable response, good reproducibility, and applicability for direct measurement of CYR content in commercial pesticide preparations and soil samples sprayed with CYR pesticide. The results obtained from the proposed method are fairly in accordance with those using the standard official method.

The Effect of Polyaniline (PANI) Coating via Dielectric-Barrier Discharge (DBD) Plasma on Conductivity and Air Drag of Polyethylene Terephthalate (PET) Yarn

In this paper, a simple method to prepare PANI-coated conductive PET yarn is reported, which involves pre-applying aniline and HCl vapors on PET surface and subsequent dielectric-barrier discharge (DBD) plasma treatment of the coated yarn under atmospheric pressure. The volume resistivity of the optimal sample was about 1.8 × 10⁵ times lower than that of the control. Moreover, with the increase of coating amount of PANI, the air drag of PET yarns improved gradually. The surface chemistry of the treated yarn was analyzed by Fourier transform-infrared (FT-IR) spectroscopy and X-ray photoelectron spectroscopy (XPS), while the morphology was observed by scanning electron microscopy (SEM) and atomic force microscopy (AFM). This study offers a new method to prepare conductive fabric via air-jet loom and is expected to increase the weaving efficiency of air-jet loom.

[Performance Improvement of Microbial Fuel Cell with Polyaniline Dopped Graphene Anode]

Microbial fuel cell (MFC) technology has potential in recovering bioelectricity from different types of waste, which attracts more and more attention in the field of environment and energy. However, low power density, high cost and low substrate degradation rate, closely associated with anode performance, limit its practical application. In this study, proportional polyaniline (PANI) together with graphene was chosen to obtain the PANI dopped graphene composite. The as-received composite was modified onto the surface of glassy carbon electrode. The results of electrochemical analysis showed that the optimal mass ratio of graphene was 20% for cyclic voltammetry (CV) and linear sweep voltammetry (LSV) analysis. The anodes with 5% graphene produced a peak power density of (831±45) mW·m^-2, which was 1.2, 1.3, 1.3, 1.5, 1.8 times of those with 20% graphene, 1% graphene, graphene, PANI and carbon cloth, respectively. Moreover, 5% graphene reactors showed the maximum values in output voltage, open-circuit voltage (OCV), chemical oxygen demand (COD) removal rate, coulombic efficiency (CE), and biomass density. The polarization resistance was only (24±2)Ω in 5% graphene reactors,which was 19.8% of that of carbon cloth. The results of electrochemical analysis were not consistent with those of bioelectrochemical analysis, demonstrating that the biocompatibility of electrode was one of the important factors affecting MFC performance. 5% graphene anode showed full advantages of graphene and PANI, which improved the performance of MFC.

Ammonia gas sensors based on In2O3/PANI hetero-nanofibers operating at room temperature

Indium nitrate/polyvinyl pyrrolidone (In(NO3)3/PVP) composite nanofibers were synthesized via electrospinning, and then hollow structure indium oxide (In2O3) nanofibers were obtained through calcination with PVP as template material. In situ polymerization was used to prepare indium oxide/polyaniline (In2O3/PANI) composite nanofibers with different mass ratios of In2O3 to aniline. The structure and morphology of In(NO3)3/PVP, In2O3/PANI composite nanofibers and pure PANI were investigated by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM) and current-voltage (I-V) measurements. The gas sensing properties of these materials towards NH3 vapor (100 to 1000 ppm) were measured at room temperature. The results revealed that the gas sensing abilities of In2O3/PANI composite nanofibers were better than pure PANI. In addition, the mass ratio of In2O3 to aniline and the p-n heterostructure between In2O3 and PANI influences the sensing performance of the In2O3/PANI composite nanofibers. In this paper, In2O3/PANI composite nanofibers with a mass ratio of 1:2 exhibited the highest response values, excellent selectivity, good repeatability and reversibility.

Crosslinked Carbon Nanotubes/Polyaniline Composites as a Pseudocapacitive Material with High Cycling Stability

The poor cycling stability of polyaniline (PANI) limits its practical application as a pseudocapacitive material due to the volume change during the charge-discharge procedure. Herein, crosslinked carbon nanotubes/polyaniline (C-CNTs/PANI) composites had been designed by the in situ chemical oxidative polymerization of aniline in the presence of crosslinked carbon nanotubes (C-CNTs), which were obtained by coupling of the functionalized carbon nanotubes with 1,4-benzoquinone. The composite showed a specific capacitance of 294 F/g at the scan rate of 10 mV/s, and could retain 95% of its initial specific capacitance after 1000 CV cycles. Such high electrochemical cycling stability resulting from the crosslinked skeleton of the C-CNTs makes them potential electrode materials for a supercapacitor.