1
|
Cysteine-Silver-Polymer Systems for the Preparation of Hydrogels and Films with Potential Applications in Regenerative Medicine. Gels 2023; 9:924. [PMID: 38131910 PMCID: PMC10742544 DOI: 10.3390/gels9120924] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/05/2023] [Revised: 11/10/2023] [Accepted: 11/14/2023] [Indexed: 12/23/2023] Open
Abstract
Herein, the problem concerning the poorer mechanical properties of gels based on low molecular weight gelators (LMWGs)-L-cysteine and silver nitrate-was solved by the addition of various polymers-polyvinyl alcohol (PVA), polyvinyl pyrrolidone (PVP) and polyethylene glycol (PEG)-to the initial cysteine-silver sol (CSS). The physicochemical methods of analysis-viscosimetry, UV spectroscopy, DLS, and SEM-identified that cysteine-silver hydrogels (CSG) based on PVA possess the best rheological properties and porous microstructure (the average pore size is 2-10 µm) compared to gels without the polymer or with PVP or PEG. Such gels are able to form cysteine-silver cryogels (CSC) and then porous cysteine-silver films (CSF) with an average pore size of 10-20 µm and good mechanical, swelling, and adhesion to skin characteristics as long as the structure of CSS particles remains stable. In vitro experiments have shown that hydrogels are non-toxic to normal human fibroblast cells. The obtained materials could potentially be applied to regenerative medicine.
Collapse
|
2
|
Biomimetic Alveoli System with Vivid Mechanical Response and Cell-Cell Interface. Adv Healthc Mater 2023; 12:e2300850. [PMID: 37288987 DOI: 10.1002/adhm.202300850] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/17/2023] [Revised: 06/05/2023] [Indexed: 06/09/2023]
Abstract
Alveolar microenvironmental models are important for studying the basic biology of the alveolus, therapeutic trials, and drug testing. However, a few systems can fully reproduce the in vivo alveolar microenvironment including dynamic stretching and the cell-cell interface. Here, a novel biomimetic alveolus-on-a-chip microsystem is presented suitable for visualizing physiological breathing for simulating the 3D architecture and function of human pulmonary alveoli. This biomimetic microsystem contains an inverse opal structured polyurethane membrane that achieves real-time observation of mechanical stretching. In this microsystem, the alveolar-capillary barrier is created by alveolar type 2 (ATII) cells cocultured with vascular endothelial cells (ECs) on this membrane. Based on this microsystem, the phenomena of flattening and the tendency of differentiation in ATII cells are observed. The synergistic effects of mechanical stretching and ECs on the proliferation of ATII cells are also observed during the repair process following lung injury. These features indicate the potential of this novel biomimetic microsystem for exploring the mechanisms of lung diseases, which can provide future guidance concerning drug targets for clinical therapies.
Collapse
|
3
|
Optical Fiber Temperature and Humidity Dual Parameter Sensing Based on Fiber Bragg Gratings and Porous Film. SENSORS (BASEL, SWITZERLAND) 2023; 23:7587. [PMID: 37688043 PMCID: PMC10490672 DOI: 10.3390/s23177587] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/09/2023] [Revised: 08/28/2023] [Accepted: 08/29/2023] [Indexed: 09/10/2023]
Abstract
A porous anodic alumina film is proposed to construct an optical fiber temperature and humidity sensor. In the sensor structure, a fiber Bragg grating is used to detect the environment temperature, and the porous film is used to detect the environment humidity. The proposed porous anodic alumina film was fabricated by anodic oxidation reaction, and it is suitable for the use of humidity detection due to its porous structure. Experimental results show the temperature sensitivity of the proposed sensor was 10.4 pm/°C and the humidity sensitivity of the proposed sensor was 185 pm/%RH.
Collapse
|
4
|
Semiconducting Polymer Nanoporous Thin Films as a Tool to Regulate Intracellular ROS Balance in Endothelial Cells. ACS APPLIED MATERIALS & INTERFACES 2023. [PMID: 37467460 PMCID: PMC10401575 DOI: 10.1021/acsami.3c06633] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 07/21/2023]
Abstract
The design of soft and nanometer-scale photoelectrodes able to stimulate and promote the intracellular concentration of reactive oxygen species (ROS) is searched for redox medicine applications. In this work, we show semiconducting polymer porous thin films with an enhanced photoelectrochemical generation of ROS in human umbilical vein endothelial cells (HUVECs). To achieve that aim, we synthesized graft copolymers, made of poly(3-hexylthiophene) (P3HT) and degradable poly(lactic acid) (PLA) segments, P3HT-g-PLA. In a second step, the hydrolysis of sacrificial PLA leads to nanometer-scale porous P3HT thin films. The pore sizes in the nm regime (220-1200 nm) were controlled by the copolymer composition and the structural arrangement of the copolymers during the film formation, as determined by atomic force microscopy (AFM) and transmission electron microscopy (TEM). The porous P3HT thin films showed enhanced photofaradaic behavior, generating a higher concentration of ROS in comparison to non-porous P3HT films, as determined by scanning electrochemical microscopy (SECM) measurements. The exogenous ROS production was able to modulate the intracellular ROS concentration in HUVECs at non-toxic levels, thus affecting the physiological functions of cells. Results presented in this work provide an important step forward in the development of new tools for precise, on-demand, and non-invasive modulation of intracellular ROS species and may be potentially extended to many other physiological or pathological cell models.
Collapse
|
5
|
Photo-Electrochemical Glycerol Conversion over a Mie Scattering Effect Enhanced Porous BiVO 4 Photoanode. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2209955. [PMID: 36692193 DOI: 10.1002/adma.202209955] [Citation(s) in RCA: 13] [Impact Index Per Article: 13.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/27/2022] [Revised: 01/18/2023] [Indexed: 06/17/2023]
Abstract
The photo-electrochemical (PEC) oxidation of glycerol (GLY) to high-value-added dihydroxyacetone (DHA) can be achieved over a BiVO4 photoanode, while the PEC performance of most BiVO4 photoanodes is impeded due to the upper limits of the photocurrent density. Here, an enhanced Mie scattering effect of the well-documented porous BiVO4 photoanode is obtained with less effort by a simple annealing process, which significantly reduces the reflectivity to near zero. The great light absorbability increases the basic photocurrent density by 1.77 times. The selective oxidation of GLY over the BiVO4 photoanode results in a photocurrent density of 6.04 mA cm-2 and a DHA production rate of 325.2 mmol m-2 h-1 that exceeds all reported values. This work addresses the poor ability of nanostructured BiVO4 to harvest light, paving the way for further improvements in charge transport and transfer to realize highly efficient PEC conversion.
Collapse
|
6
|
Construction of Metal-Organic Framework Films via Crosslinking-Induced Assembly. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2209777. [PMID: 36493462 DOI: 10.1002/adma.202209777] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/23/2022] [Revised: 11/24/2022] [Indexed: 06/17/2023]
Abstract
The construction of metal-organic framework (MOF) films is a crucial step for integrating them into technical applications. However, due to the crystallization nature, it is difficult to grow most MOFs spontaneously or process them into films. Here, a convenient strategy is demonstrated for constructing MOF films by using modulators to achieve homogeneous assembly of MOF clusters. Small clusters in the early growth steps of MOFs can be stabilized by modulators to form fluidic precursors with good processibility. Then, simple removal of modulators will trigger the crosslinking of MOF clusters and lead to the formation of continuous films. This strategy is universal for the fabrication of several types of MOF films with large scale and controllable thickness, which can be deposited on a variety of substrates as well as can be patterned in micro/nano resolution. Additionally, versatile composite MOF films can be easily synthesized by introducing functional materials during the crosslinking process, which brings them broader application prospects.
Collapse
|
7
|
Development of 3D Printed Multi-Layered Orodispersible Films with Porous Structure Applicable as a Substrate for Inkjet Printing. Pharmaceutics 2023; 15:pharmaceutics15020714. [PMID: 36840036 PMCID: PMC9961792 DOI: 10.3390/pharmaceutics15020714] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/12/2023] [Revised: 01/31/2023] [Accepted: 02/17/2023] [Indexed: 02/25/2023] Open
Abstract
The direct tailoring of the size, composition, or number of layers belongs to the advantages of 3D printing employment in producing orodispersible films (ODFs) compared to the frequently utilized solvent casting method. This study aimed to produce porous ODFs as a substrate for medicated ink deposited by a 2D printer. The innovative semi-solid extrusion 3D printing method was employed to produce multilayered ODFs, where the bottom layer assures the mechanical properties. In contrast, the top layer provides a porous structure for ink entrapment. Hydroxypropyl methylcellulose and polyvinyl alcohol were utilized as film-forming polymers, glycerol as a plasticizer, and sodium starch glycolate as a disintegrant in the bottom matrix. Several porogen agents (Aeroperl® 300, Fujisil®, Syloid® 244 FP, Syloid® XDP 3050, Neusilin® S2, Neusilin® US2, and Neusilin® UFL2) acted as porosity enhancers in the two types of top layer. ODFs with satisfactory disintegration time were prepared. The correlation between the porogen content and the mechanical properties was proved. A porous ODF structure was detected in most samples and linked to the porogen content. SSE 3D printing represents a promising preparation method for the production of porous ODFs as substrates for subsequent drug deposition by 2D printing, avoiding the difficulties arising in casting or printing medicated ODFs directly.
Collapse
|
8
|
Mass and density determination of porous nanoparticle films using a quartz crystal microbalance. NANOTECHNOLOGY 2022; 33:485704. [PMID: 35697007 DOI: 10.1088/1361-6528/ac7811] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/23/2022] [Accepted: 06/13/2022] [Indexed: 06/15/2023]
Abstract
A method is presented to directly measure the mass output of an impaction printer coupled with a spark ablation generator. It is based on a quartz crystal microbalance and shown to be reliable in quantifying mass deposition rate. Here, the method is demonstrated with an Au nanoparticle aerosol synthesized under several spark ablation and deposition settings. Changes in the deposition rate in response to changed synthesis conditions follow the spark ablation models on generation rate made in previous studies, validating this novel measurement method. In combination with the volume of a deposit, a good estimate of the film porosity can be made. The Au nanoparticle films synthesized here have a low porosity of 0.18 due to extensive restructuring and compaction on impact with the substrate. The porosity is found to be insensitive to deposition settings and is constant throughout the film. The simplicity and low cost of a quartz crystal microbalance setup make this an accessible method to determine porosity in porous thin films.
Collapse
|
9
|
Periodic Nanoporous Inorganic Patterns Directly Made by Self-Ordering of Cracks. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2204489. [PMID: 35797893 DOI: 10.1002/adma.202204489] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/18/2022] [Revised: 06/21/2022] [Indexed: 06/15/2023]
Abstract
Solution-processed inorganic nanoporous films are key components for the vast spectrum of applications ranging from dew harvesting to solar cells. Shaping them into complex architectures required for advanced functionality often needs time-consuming or expensive fabrication. In this work, crack formation is harnessed to pattern porous inorganic films in a single step and without using lithography. Aqueous inks, containing inorganic precursors and polymeric latexes enable evaporation-induced, defect-free periodic arrays of cracks with tunable dimensions over several centimeters. The ink formulation strategy is generalized to more than ten inorganic materials including simple and binary porous oxide and metallic films covering a whole spectrum of properties including insulating, photocatalytic, electrocatalytic, conductive, or electrochromic materials. Notably, this approach enables 3D self-assembly of cracks by stacking several layers of different compositions, yielding periodic assemblies of polygonal shapes and Janus-type patterns. The crack patterned periodic arrays of nanoporous TiO2 diffract light, and are used as temperature-responsive diffraction grating sensors. More broadly, this method represents a unique example of a self-assembly process leading to long-range order (over several centimeters) in a robust and controlled way.
Collapse
|
10
|
CdS-Decorated Porous Anodic SnO x Photoanodes with Enhanced Performance under Visible Light. MATERIALS 2022; 15:ma15113848. [PMID: 35683143 PMCID: PMC9181453 DOI: 10.3390/ma15113848] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/15/2022] [Revised: 05/23/2022] [Accepted: 05/24/2022] [Indexed: 02/06/2023]
Abstract
Electrochemically generated nanoporous tin oxide films have already been studied as photoanodes in photoelectrochemical water splitting systems. However, up to now, the most significant drawback of such materials was their relatively wide band gap (ca. 3.0 eV), which limits their effective performance in the UV light range. Therefore, here, we present for the first time an effective strategy for sensitization of porous anodic SnOx films with another narrow band gap semiconductor. Nanoporous tin oxide layers were obtained by simple one-step anodic oxidation of metallic Sn in 1 M NaOH followed by further surface decoration with CdS by the successive ionic layer adsorption and reaction (SILAR) method. It was found that the nanoporous morphology of as-anodized SnOx is still preserved after CdS deposition. Such SnOx/CdS photoanodes exhibited enhanced photoelectrochemical activity in the visible range compared to unmodified SnOx. However, the thermal treatment at 200 °C before the SILAR process was found to be a key factor responsible for the optimal photoresponse of the material.
Collapse
|
11
|
Vacuum-deposited thin film porous ZnO-metal oxide hybrid systems for microsupercapacitor applications with Ir/IrO 2in ZnO as a new, high-performance electrode. NANOTECHNOLOGY 2021; 33. [PMID: 34598175 DOI: 10.1088/1361-6528/ac2c43] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/16/2021] [Accepted: 10/01/2021] [Indexed: 06/13/2023]
Abstract
We fabricate porous nanostructured 1μm thick ZnO-metal/metal oxide hybrid material thin films using a unique approach utilizing physical vapor deposition with postdeposition annealing. We study Pt, Pd, Ru, Ir and Sn as the metals and find they all form hybrid structures, however with differing physical and electrochemical properties. We investigate their applicability in microsupercapacitor electrodes in a LiCl aqueous electrolyte and find that the ZnO hybrid with Ir exhibits the highest capacitances. We follow with optimization and more detailed material studies of the ZnO-Ir hybrid showing that a significant amount of Ir is present in the material in the form of metallic Ir and indiffused Ir, while IrO2is also present in the nanoscale. We obtain electrodes with 5.25 mF · cm-2capacitance with 90% retention over 10 000 charge/discharge cycles in an aqueous LiCl electrolyte, which is better than the reported values for other Ir-based hybrids. Finally, we showed that the electrodes provide 2.64 mF · cm-2in a symmetric device with an operating voltage of 0.8 V. With this report, we discuss the influence of both Ir and IrO2on the capacitance, underlining the synergistic effect, and show them as promising inorganic matterials for integration with other supercapacitor electrodes.
Collapse
|
12
|
Design of Aligned Porous Carbon Films with Single-Atom Co-N-C Sites for High-Current-Density Hydrogen Generation. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2103533. [PMID: 34425039 DOI: 10.1002/adma.202103533] [Citation(s) in RCA: 32] [Impact Index Per Article: 10.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/10/2021] [Revised: 07/08/2021] [Indexed: 06/13/2023]
Abstract
Metal- and nitrogen-doped carbon (M-N-C) materials as a unique class of single-atom catalysts (SACs) have increasingly attracted attention as the replacement of platinum for the hydrogen evolution reaction (HER); however, their employment as HER electrodes at high current densities of industrial level remains a grand challenge. Herein, an aligned porous carbon film embedded with single-atom Co-N-C sites of exceptional activity and stability at high current densities is designed. Within the film, the atomic CoNx moieties exhibit high intrinsic activity, while the multiscale porosity of the carbon frameworks with vertically aligned microchannels afford facilitated mass transfer under the conditions of high production rate and ultrathick electrodes. Moreover, the superwetting properties of the film promote electrolyte wetting and ensure the timely removal of the evolving H2 gas bubbles. The as-designed film can work as an efficient HER electrode to deliver 500 and 1000 mA cm-2 in acid at overpotentials of 272 and 343 mV, respectively, and can operate uninterruptedly and stably at 1000 mA cm-2 for at least 32 h under static conditions. These findings pave the road toward the rational design of SACs with improved activity and stability at high current densities in gas-evolving electrocatalytic processes.
Collapse
|
13
|
Porous Semiconducting Polymers Enable High-Performance Electrochemical Transistors. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2007041. [PMID: 33655643 DOI: 10.1002/adma.202007041] [Citation(s) in RCA: 28] [Impact Index Per Article: 9.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/15/2020] [Revised: 01/04/2021] [Indexed: 06/12/2023]
Abstract
Organic polymer electrochemical transistors (OECTs) are of great interest for flexible electronics and bioelectronics applications owing to their high transconductance and low operating voltage. However, efficient OECT operation must delicately balance the seemingly incompatible materials optimizations of redox chemistry, active layer electronic transport, and ion penetration/transport. The latter characteristics are particularly challenging since most high-mobility semiconducting polymers are hydrophobic, which hinders efficient ion penetration, hence limiting OECT performance. Here, the properties and OECT response of a series of dense and porous semiconducting polymer films are compared, the latter fabricated via a facile breath figure approach. This methodology enables fast ion doping, high transconductance (up to 364 S cm-1 ), and a low subthreshold swing for the hydrophobic polymers DPPDTT and P3HT, rivalling or exceeding the metrics of the relatively hydrophilic polymer, Pg2T-T. Furthermore, the porous morphology also enhances the transconductance of hydrophilic polymers, offering a general strategy for fabricating high-performance electrochemical transistors.
Collapse
|
14
|
Enhanced Electricity Generation and Tunable Preservation in Porous Polymeric Materials via Coupled Piezoelectric and Dielectric Processes. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e2003087. [PMID: 32844463 DOI: 10.1002/adma.202003087] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/07/2020] [Revised: 07/07/2020] [Indexed: 06/11/2023]
Abstract
Biological systems and artificial devices convert omnipresent low-frequency and weak mechanical stimulation into electricity for important functions. However, in-depth understanding of the energy conversion, boosting, and preservation processes of the coupled piezo-dielectric phenomenon in polymeric artificial materials is still lacking. In this study, combined experimental and simulation methods are employed to rationalize the process of energy conversion and preservation via a coupled piezo-dielectric phenomena in composite polymeric films. Both the intensity of the transmembrane electric voltages and the kinetic aspects of the energy generation and preservation process are elucidated. The study indicates that composite films consisting of a conductive filler fraction below the percolation threshold, effectively convert low-frequency mechanical stimulation to preserved electrical energy. Interestingly, film structure engineered into porous film has the ability to break the intertwined high-voltage and exhibits a low-preservation-period relationship; it can simultaneously provide high electric field intensity, high induction velocity, and a long preservation period. The model is not only supported by the experiments but is also consistent with the electricity generation and preservation features of other reported piezo-dielectric films. The systematic understanding can facilitate and inspire new device designs to better address the energy, environmental, and biomedical challenges faced by modern societies.
Collapse
|
15
|
Porous V 2O 5/TiO 2 Nanoheterostructure Films with Enhanced Visible-Light Photocatalytic Performance Prepared by the Sparking Method. Molecules 2020; 25:E3327. [PMID: 32707984 PMCID: PMC7435749 DOI: 10.3390/molecules25153327] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/25/2020] [Revised: 07/17/2020] [Accepted: 07/20/2020] [Indexed: 11/29/2022] Open
Abstract
Porous V2O5/TiO2 nanoheterostructure films with different atomic ratios of Ti/V (4:1, 2:1, 1:1, and 1:2) were synthesized by a sparking method for the first time. The sparking method, which is a simple and cost-effective process, can synthesize highly porous and composite films in one step. Field-emission scanning electron microscope (FE-SEM) images revealed the porosity morphology of all prepared samples. V2O5/TiO2 nanoheterostructure films were confirmed by Raman spectroscopy, high-resolution transmission electron microscopy (HRTEM), and X-ray photoelectron spectroscopy (XPS). The secondary particle size and band gap of the samples were highly correlated to the V2O5 proportion, resulting in enhanced visible-light absorbance. V2O5/TiO2 nanoheterostructure films at an atomic ratio of 1:1 showed the highest photocatalytic performance, which improved the degradation rate up to 24% compared to pure TiO2 film. It is believed that the formed nanoheterostructure and greater portion of V4+ ions are reflected by this ratio.
Collapse
|
16
|
T-Shaped Microfluidic Junction Processing of Porous Alginate-Based Films and Their Characteristics. Polymers (Basel) 2019; 11:E1386. [PMID: 31450763 PMCID: PMC6780642 DOI: 10.3390/polym11091386] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/17/2019] [Revised: 08/15/2019] [Accepted: 08/20/2019] [Indexed: 02/07/2023] Open
Abstract
In this work, highly monodisperse porous alginate films from bubble bursting were formed on a glass substrate at ambient temperature, by a T-shaped microfluidic junction device method using polyethylene glycol (PEG) stearate and phospholipid as precursors in some cases. Various polymer solution concentrations and feeding liquid flow rates were applied for the generation of monodisperse microbubbles, followed by the conversion of the bubbles to porous film structures on glass substrates. In order to compare the physical properties of polymeric solutions, the effects of alginate, PEG stearate (surfactant), and phospholipid concentrations on the flowability of the liquid in a T-shaped microfluidic junction device were studied. To tailor microbubble diameter and size distribution, a method for controlling the thinning process of the bubbles' shell was also explored. In order to control pore size, shape, and surface as well as internal structure morphologies in the scalable forming of alginate polymeric films, the effect of the feeding liquid's flow rate and concentrations of PEG-stearate and phospholipid was also studied. Digital microscopy images revealed that the as-formed alginate films at the flow rate of 100 µL·min-1 and the N2 gas pressure of 0.8 bar have highly monodisperse microbubbles with a polydispersity index (PDI) of approximately 6.5%. SEM captures also revealed that the as-formed alginate films with high PDI value have similar monodisperse porous surface and internal structure morphologies, with the exception that the as-formed alginate films with the help of phospholipids were mainly formed under our experimental environment. From the Fourier-transform infrared spectroscopy (FTIR), Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) measurements, we concluded that no chemical composition changes, thermal influence, and crystal structural modifications were observed due to the T-shaped microfluidic junction device technique. The method used in this work could expand and enhance the use of alginate porous films in a wide range of bioengineering applications, especially in tissue engineering and drug delivery, such as studying release behaviors to different internal and surface morphologies.
Collapse
|
17
|
Nature of Electronic Conduction in "Pseudocapacitive" Films: Transition from the Insulator State to Band-Conduction. ACS APPLIED MATERIALS & INTERFACES 2019; 11:28769-28773. [PMID: 31311266 DOI: 10.1021/acsami.9b05240] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
The transition between the insulator state and the band-conducting state is investigated by means of cyclic voltammetry in cobalt oxide porous film electrodes in phosphate-buffered solutions. It is shown that a proton-coupled faradaic oxidative process starting in the insulator region eventually builds an ohmic conduction mode upon anodic polarization. This model allows one to understand the origin of the authentic capacitive behavior of conductive metal oxide films rather than the so-called "pseudocapacitive" behavior. The particular example of cobalt oxide serves to illustrate the way in which, more generally, the behavior of "pseudocapacitors", long ascribed to the superposition of faradaic reactions, is in fact that of true capacitors, once band-conduction has been established upon oxidation of the material.
Collapse
|
18
|
Porous Surface Films With Tunable Morphologies and Hydrophobic Properties Based on Block Copolymer Under the Effects of Thermal Annealing. Front Chem 2019; 7:181. [PMID: 30984747 PMCID: PMC6447698 DOI: 10.3389/fchem.2019.00181] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/13/2018] [Accepted: 03/07/2019] [Indexed: 11/13/2022] Open
Abstract
The fabrication of porous-structured polymer films with patterned surface structures has recently attracted increased interest within the material science field. In this work, a series of microstructure scale patterned polymer films were obtained via breath figure methods (BF) with hydrophobic surface films based on self-assembled diblock copolymers by atom-transfer radical polymerization (ATRP). The surface characteristics and morphological properties, pore size, roughness, thickness, and wettability of the block copolymer films was studied in response to variation of the hydrophilic co-monomer structures. A significant improvement of the quality and order of the hydrophobic films was observed in response to thermal annealing and a consequent optimization of the assembly process.
Collapse
|
19
|
Influence of Synthesis Conditions on Microstructure and NO₂ Sensing Properties of WO₃ Porous Films Synthesized by Non-Hydrolytic Sol⁻Gel Method. NANOMATERIALS (BASEL, SWITZERLAND) 2018; 9:E8. [PMID: 30577653 PMCID: PMC6359434 DOI: 10.3390/nano9010008] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/18/2018] [Revised: 12/15/2018] [Accepted: 12/19/2018] [Indexed: 11/17/2022]
Abstract
Nanostructured tungsten trioxide porous films were prepared by a non-hydrolytic sol⁻gel method following the inorganic route in which ethanol and PEG were used as the oxygen-donor and structure-directing reagent, respectively. The effects of aging time of the precursor solution, PEG content, and calcination temperature on the structure, morphology, and NO₂ sensing properties of WO₃ films were systematically investigated by using the techniques of X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, and gas sensing measurements. The results demonstrated that a series of WO₃ films with different microstructures could be obtained by manipulating the synthesis parameters. Furthermore, a suitable synthesis condition of WO₃ films for NO₂ sensing application was determined.
Collapse
|
20
|
Liquid Crystal Elastomer Actuators from Anisotropic Porous Polymer Template. Macromol Rapid Commun 2017; 38. [PMID: 28488315 DOI: 10.1002/marc.201600699] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/09/2016] [Revised: 12/14/2016] [Indexed: 11/11/2022]
Abstract
Controlling self-assembly behaviors of liquid crystals is a fundamental issue for designing them as intelligent actuators. Here, anisotropic porous polyvinylidene fluoride film is utilized as a template to induce homogeneous alignment of liquid crystals. The mechanism of liquid crystal alignment induced by anisotropic porous polyvinylidene fluoride film is illustrated based on the relationship between the alignment behavior of liquid crystals and surface microstructure of anisotropic polyvinylidene fluoride film. Liquid crystal elastomer actuators with fast responsiveness, large strain change, and reversible actuation behaviors are achieved by the photopolymerization of liquid crystal monomer in liquid crystal cells coated with anisotropic porous films.
Collapse
|
21
|
Deterministic Reshaping of Breath Figure Arrays by Directional Photomanipulation. ACS APPLIED MATERIALS & INTERFACES 2017; 9:4223-4230. [PMID: 28071893 DOI: 10.1021/acsami.6b14024] [Citation(s) in RCA: 21] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
Abstract
The fabrication of desired structures is one of the most urgent topics in current research on porous polymer films. Herein, directional photomanipulation in conjunction with breath figure processing has been demonstrated for the preparation of porous polymeric films with finely tunable pore shape and size. Because of the photoinduced directional mass migration of azobenzene units upon vertical incident linearly polarized light (LPL) irradiation, round pores on honeycomb films can be reshaped into multifarious shapes including rectangle, rhombus, dumbbell, line, and so forth. In addition, slantwise LPL irradiation produces unique asymmetrical structure inside the pores oriented along the polarized direction. On the other hand, circularly polarized light (CPL) irradiation affords manipulation of the wall thickness without changing the pore shape. This versatile directional photomanipulation method can be implemented to large-area and high-throughput reshaping processes, which paves the way to a number of promising applications such as a flexible etching mask for patterning.
Collapse
|
22
|
"Core-Shell" Nanostructured Supported Size-Selective Catalysts with High Catalytic Activity. NANO LETTERS 2017; 17:104-109. [PMID: 27936773 DOI: 10.1021/acs.nanolett.6b03587] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
Abstract
We report the synthesis of a highly active, supported nanostructured metal nanoparticle catalyst with an ultrathin porous shell and gaps between the metal nanoparticles and the shell for size-selective reactions. The size-selectivity of the catalysts could be realized through the porous shell. The gaps were able to reduce catalytic activity loss due to the contact areas between the shell and the catalytic sites. Evaluations of the activity and selectivity of the catalysts were made by catalytic hydrogenation of n-hexene versus cis-cyclooctene. Further verification of the high catalytic activity of the nanostructured catalysts was by oxidation of carbon monoxide.
Collapse
|
23
|
3D Lattice Structure Control of Ordered Macroporous Material by Self-Assembly of Liquid Droplets. Macromol Rapid Commun 2016; 38. [PMID: 27775196 DOI: 10.1002/marc.201600502] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/11/2016] [Revised: 09/17/2016] [Indexed: 11/07/2022]
Abstract
Microfluidic devices, which can continuously fabricate single emulsion with monodispersed droplets having a pore diameter of more than 100 μm in large numbers, can be applied to manufacture ordered macroporous films. 3D ordered macroporous films with a diameter of more than 100 μm can be fabricated using ordered arrays of the monodispersed droplets as templates of the macropores, which are self-assembled in the space between two parallel flat glass plates. As the gap between the glass plates increases, the number of the layer increases. Furthermore, in the case with two or more layers, the lattice structure of the macroporous films also changes due to the confinement effects.
Collapse
|
24
|
Anisotropic Slippery Surfaces: Electric-Driven Smart Control of a Drop's Slide. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2016; 28:6999-7007. [PMID: 27197963 DOI: 10.1002/adma.201601239] [Citation(s) in RCA: 29] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/03/2016] [Revised: 04/01/2016] [Indexed: 06/05/2023]
Abstract
Anisotropic slippery surfaces composed of directional, porous, conductive poly(3-hexylthiophene) (P3HT) fibers, and silicone oil exhibit excellent anisotropic sliding properties for several liquid droplets and the reversible control of conductive liquid droplets sliding on these surfaces under the application of voltage.
Collapse
|
25
|
Toward Cell Selective Surfaces: Cell Adhesion and Proliferation on Breath Figures with Antifouling Surface Chemistry. ACS APPLIED MATERIALS & INTERFACES 2016; 8:6344-6353. [PMID: 26909529 DOI: 10.1021/acsami.5b12832] [Citation(s) in RCA: 38] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
We report the preparation of microporous functional polymer surfaces that have been proven to be selective surfaces toward eukaryotic cells while maintaining antifouling properties against bacteria. The fabrication of functional porous films has been carried out by the breath figures approach that allowed us to create porous interfaces with either poly(ethylene glycol) methyl ether methacrylate (PEGMA) or 2,3,4,5,6-pentafluorostyrene (5FS). For this purpose, blends of block copolymers in a polystyrene homopolymer matrix have been employed. In contrast to the case of single functional polymer, using blends enables us to vary the chemical distribution of the functional groups inside and outside the formed pores. In particular, fluorinated groups were positioned at the edges while the hydrophilic PEGMA groups were selectively located inside the pores, as demonstrated by TOF-SIMS. More interestingly, studies of cell adhesion, growth, and proliferation on these surfaces confirmed that PEGMA functionalized interfaces are excellent candidates to selectively allow cell growth and proliferation while maintaining antifouling properties.
Collapse
|
26
|
Mechanically Tough Large-Area Hierarchical Porous Graphene Films for High-Performance Flexible Supercapacitor Applications. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2015; 27:4469-4475. [PMID: 26135240 DOI: 10.1002/adma.201501983] [Citation(s) in RCA: 97] [Impact Index Per Article: 10.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/24/2015] [Revised: 05/21/2015] [Indexed: 05/17/2023]
Abstract
Mechanically tough large-area hierarchical porous graphene films are fabricated by blade-casting of graphene oxide hydrogel and postcasting reduction. The as-prepared graphene films, which consist of well-exfoliated graphene nanosheets, possess interpenetrating 3D hierarchical porous structures, high strength and modulus, large specific area, and high electrical conductivity. Flexible film supercapacitors fabricated with the graphene electrodes show superior areal capacitance, good rate performance, and excellent mechanical stability.
Collapse
|
27
|
Tricontinuous Cubic Nanostructure and Pore Size Patterning in Mesostructured Silica Films Templated with Glycerol Monooleate. CHEMISTRY OF MATERIALS : A PUBLICATION OF THE AMERICAN CHEMICAL SOCIETY 2011; 23:2107-2112. [PMID: 21572556 PMCID: PMC3091003 DOI: 10.1021/cm1033723] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/25/2023]
Abstract
The fabrication of nanostructured films possessing tricontinuous minimal surface mesophases with well-defined framework and pore connectivity remains a difficult task. As a new route to these structures, we introduce glycerol monooleate (GMO) as a template for evaporation-induced self-assembly. As deposited, a nanostructured double gyroid phase is formed, as indicated by analysis of grazing-incidence small-angle x-ray scattering data. Removal of GMO by UV/O(3) treatment or acid extraction induces a phase change to a nanoporous body-centered structure which we tentatively identify as based on the IW-P surface. To improve film quality, we add a co-surfactant to the GMO in a mass ratio of 1:10; when this co-surfactant is cetyltrimethylammonium bromide, we find an unusually large pore size (8-12 nm) in acid extracted films, while UV/O(3) treated films yield pores of only ca. 4 nm. Using this pore size dependence on film processing procedure, we create a simple method for patterning pore size in nanoporous films, demonstrating spatially-defined size-selective molecular adsorption.
Collapse
|