Density Functional Theory-Based Protocol to Calculate the Redox Potentials of First-row Transition Metal Complexes for Aqueous Redox Targeting Flow Batteries

Transition metal complexes are a promising class of redox mediators for targeting redox flow batteries due to the tunability of their electrochemical potentials. However, reliable time-efficient tools for the prediction of their reduction potentials are needed. In this work, we establish a suitable density functional theory protocol for their prediction using an initial experimental data set of aqueous iron complexes with bidentate ligands. The approach is then cross-validated using different complexes found in the redox-flow literature. We find that the solvation model affects the prediction accuracy more than the functional or basis set. The smallest errors are obtained using the COSMO-RS solvation model (mean average error (MAE)=0.24 V). With implicit solvation models, a general deviation from experimental results is observed. For a set of similar ligands, they can be corrected using simple linear regression (MAE=0.051 V for the initial set of iron complexes).

Aqueous Redox Flow Batteries: Small Organic Molecules for the Positive Electrolyte Species

There are a number of critical requirements for electrolytes in aqueous redox flow batteries. This paper reviews organic molecules that have been used as the redox-active electrolyte for the positive cell reaction in aqueous redox flow batteries. These organic compounds are centred around different organic redox-active moieties such as the aminoxyl radical (TEMPO and N-hydroxyphthalimide), carbonyl (quinones and biphenols), amine (e. g., indigo carmine), ether and thioether (e. g., thianthrene) groups. We consider the key metrics that can be used to assess their performance: redox potential, operating pH, solubility, redox kinetics, diffusivity, stability, and cost. We develop a new figure of merit - the theoretical intrinsic power density - which combines the first four of the aforementioned metrics to allow ranking of different redox couples on just one side of the battery. The organic electrolytes show theoretical intrinsic power densities which are 2-100 times larger than that of the VO2+ /VO2 + couple, with TEMPO-derivatives showing the highest performance. Finally, we survey organic positive electrolytes in the literature on the basis of their redox-active moieties and the aforementioned figure of merit.

Organic Electroactive Materials for Aqueous Redox Flow Batteries

Organic electroactive materials take advantage of potentially sustainable production and structural tunability compared to present commercial inorganic materials. Unfortunately, traditional redox flow batteries based on toxic redox-active metal ions have certain deficiencies in resource utilization and environmental protection. In comparison, organic electroactive materials in aqueous redox flow batteries (ARFBs) have received extensive attention in recent years for low-cost and sustainable energy storage systems due to their inherent safety. This review aims to provide the recent progress in organic electroactive materials for ARFBs. The main reaction types of organic electroactive materials are classified in ARFBs to provide an overview of how to regulate their solubility, potential, stability, and viscosity. Then, the organic anolyte and catholyte in ARFBs are summarized according to the types of quinones, viologens, nitroxide radicals, hydroquinones, etc, and how to increase the solubility by designing various functional groups is emphasized. The research advances are presented next in the characterization of organic electroactive materials for ARFBs. Future efforts are finally suggested to focus on building neutral ARFBs, designing advanced electroactive materials through molecular engineering, and resolving problems of commercial applications.

Permselectivity and Ionic Conductivity Study of Na+ and Br- Ions in Graphene Oxide-Based Membranes for Redox Flow Batteries

Permselectivity of a membrane is central for the development of electrochemical energy storage devices with two redox couples, such as redox flow batteries (RFBs). In RFBs, Br3-/Br- couple is often used as a catholyte which can cross over to the anolyte, limiting the battery's lifetime. Naturally, the development of permselective membranes is essential to the success of RFBs since state-of-the-art perfluorosulfonic acid (PFSA) is too costly. This study investigates membranes of graphene oxide (GO), polyvinylpyrrolidone (PVP), and imidazole (Im) as binder and linker, respectively. The GO membranes are compared to a standard PFSA membrane in terms of ionic conductivity (Na+) and permselectivity (exclusion of Br-). The ionic conduction is evaluated from electrochemical impedance spectroscopy and the permselectivity from two-compartment diffusion cells in a four-electrode system. Our findings suggest that the GO membranes reach conductivity and permselectivity comparable with standard PFSA membranes.

Doping Engineering of M-N-C Electrocatalyst Based Membrane-Electrode Assembly for High-Performance Aqueous Polysulfides Redox Flow Batteries

Polysulfides aqueous redox flow batteries (PS-ARFBs) with large theoretical capacity and low cost are one of the most promising solutions for large-scale energy storage technology. However, sluggish electrochemical redox kinetics and nonnegligible crossover of aqueous polysulfides restrict the battery performances. Herein, it is found that the Co, Zn dual-doped N-C complex have enhanced electrochemical adsorption behaviors for Na₂ S₂ . It exhibits significantly electrochemical redox activity compared to the bare glassy carbon electrode. And the redox reversibility is also improved from ΔV = 210 mV on Zn-doped N-C complex to ΔV = 164 mV on Co, Zn-doped N-C complex. Furthermore, membrane-electrode assembly (MEA) based on Co, Zn-doped N-C complex is firstly proposed to enhance the redox performances and relieve the crossover in PS-ARFBs. Thus, an impressively high and reversible capacity of 157.5 Ah L^-1 for Na₂ S₂ with a high capacity utilization of 97.9% could be achieved. Moreover, a full cell PS-ARFB with Na₂ S₂ anolyte and Na₄ [Fe(CN)₆ ] catholyte exhibits high energy efficiency ≈88.4% at 10 mA cm^-2 . A very low capacity decay rate of 0.0025% per cycle is also achieved at 60 mA cm^-2 over 200 cycles.

Thin Film Composite Membranes with Regulated Crossover and Water Migration for Long-Life Aqueous Redox Flow Batteries

Redox flow batteries (RFBs) are promising for large-scale long-duration energy storage owing to their inherent safety, decoupled power and energy, high efficiency, and longevity. Membranes constitute an important component that affects mass transport processes in RFBs, including ion transport, redox-species crossover, and the net volumetric transfer of supporting electrolytes. Hydrophilic microporous polymers, such as polymers of intrinsic microporosity (PIM), are demonstrated as next-generation ion-selective membranes in RFBs. However, the crossover of redox species and water migration through membranes are remaining challenges for battery longevity. Here, a facile strategy is reported for regulating mass transport and enhancing battery cycling stability by employing thin film composite (TFC) membranes prepared from a PIM polymer with optimized selective-layer thickness. Integration of these PIM-based TFC membranes with a variety of redox chemistries allows for the screening of suitable RFB systems that display high compatibility between membrane and redox couples, affording long-life operation with minimal capacity fade. Thickness optimization of TFC membranes further improves cycling performance and significantly restricts water transfer in selected RFB systems.

Grafting and Solubilization of Redox-Active Organic Materials for Aqueous Redox Flow Batteries

This study concerns the development of sustainable design strategies of aqueous electrolytes for redox flow batteries using redox-active organic materials. A green spontaneous grafting reaction occurs between a redox-active organic radical and an electrochemically activated structural modifier at room temperature through a simple mixing step. Then, a physical mixing method is used to formulate a structured aqueous electrolyte and enables aqueous solubilization of the organic solute from below 0.5 to 1.5 m beyond the conventional dissolution limit. The as-obtained concentrated mixture can be readily used as catholyte for a redox flow battery. A record high discharge cell voltage (1.6 V onset output voltage) in aqueous non-hybrid flow cell is attained by using the studied electrolytes.

How Green are Redox Flow Batteries?

Providing sustainable energy storage is a challenge that must be overcome to replace fossil-based fuels. Redox flow batteries are a promising storage option that can compensate for fluctuations in energy generation from renewable energy production, as their main asset is their design flexibility in terms of storage capacity. Current commercial options for flow batteries are mostly limited to inorganic materials such as vanadium, zinc, and bromine. As environmental aspects are one of the main drivers for developing flow batteries, assessing their environmental performance is crucial. However, this topic is still underexplored, as researchers have mostly focused on single systems with defined use cases and system boundaries, making the assessments of the overall technology inaccurate. This review was conducted to summarize the main findings of life cycle assessment studies on flow batteries with respect to environmental hotspots and their performance as compared to that of other battery systems.

A Systematic Study on the Redox Potentials of Phenazine-Derivatives in Aqueous Media: A Combined Computational and Experimental Work

Phenazines are an emerging class of organic compounds that have been recently utilized in aqueous redox flow batteries, a promising technology for large-scale energy storage. A virtual screening based on density functional theory calculations is used to investigate the redox potentials of around 100 phenazine derivatives in aqueous media containing various electron-donating or electron-withdrawing groups at different positions. The calculations identify the crucial positions that should be functionalized with multiple hydroxy groups to design new anolytes. The combined experimental-computational methodology reported herein guides the development of a new molecule with a record low reversible redox potential as a potential anolyte for aqueous redox flow batteries.

Ion-Selective Microporous Polymer Membranes with Hydrogen-Bond and Salt-Bridge Networks for Aqueous Organic Redox Flow Batteries

Redox flow batteries (RFBs) have great potential for long-duration grid-scale energy storage. Ion-conducting membranes are a crucial component in RFBs, allowing charge-carrying ions to transport while preventing the cross-mixing of redox couples. Commercial Nafion membranes are widely used in RFBs, but their unsatisfactory ionic and molecular selectivity, as well as high costs, limit the performance and the widespread deployment of this technology. To extend the longevity and reduce the cost of RFB systems, inexpensive ion-selective membranes that concurrently deliver low ionic resistance and high selectivity toward redox-active species are highly desired. Here, high-performance RFB membranes are fabricated from blends of carboxylate- and amidoxime-functionalized polymers of intrinsic microporosity, which exploit the beneficial properties of both polymers. The enthalpy-driven formation of cohesive interchain interactions, including hydrogen bonds and salt bridges, facilitates the microscopic miscibility of the blends, while ionizable functional groups within the sub-nanometer pores allow optimization of membrane ion-transport functions. The resulting microporous membranes demonstrate fast cation conduction with low crossover of redox-active molecular species, enabling improved power ratings and reduced capacity fade in aqueous RFBs using anthraquinone and ferrocyanide as redox couples.

Controlling π-π Interactions of Highly Soluble Naphthalene Diimide Derivatives for Neutral pH Aqueous Redox Flow Batteries

Organic redox-active molecules are a promising platform for designing sustainable, cheap, and safe charge carriers for redox flow batteries. However, radical formation during the electron-transfer process causes severe side reactions and reduces cyclability. This problem is mitigated by using naphthalene diimide (NDI) molecules and regulating their π-π interactions. The long-range π-stacking of NDI molecules, which leads to precipitation, is disrupted by tethering four ammonium functionalities, and the solubility approaches 1.5 m in water. The gentle π-π interactions induce clustering and disassembling of the NDI molecules during the two-electron transfer processes. When the radical anion forms, the antiferromagnetic coupling develops tetramer and dimer and nullifies the radical character. In addition, short-range-order NDI clusters at 1 m concentration are not precipitated but inhibit crossover. They are disassembled in the subsequent electron-transfer process, and the negatively charged NDI core strongly interacts with ammonium groups. These behaviors afford excellent RFB performance, demonstrating 98% capacity retention for 500 cycles at 25 mA cm^-2 and 99.5% Coulombic efficiency with 2 m electron storage capacity.

Automated Measurement of Electrogenerated Redox Species Degradation Using Multiplexed Interdigitated Electrode Arrays

Characterizing the decomposition of electrogenerated species in solution is essential for applications involving electrosynthesis, homogeneous electrocatalysis, and energy storage with redox flow batteries. In this work, we present an automated, multiplexed, and highly robust platform for determining the rate constant of chemical reaction steps following electron transfer, known as the EC mechanism. We developed a generation-collection methodology based on microfabricated interdigitated electrode arrays (IDAs) with variable gap widths on a single device. Using a combination of finite-element simulations and statistical analysis of experimental data, our results show that the natural logarithm of collection efficiency is linear with respect to gap width, and this quantitative analysis is used to determine the decomposition rate constant of the electrogenerated species (k _c). The integrated IDA method is used in a series of experiments to measure k _c values between ∼0.01 and 100 s^-1 in aqueous and nonaqueous solvents and at concentrations as high as 0.5 M of the redox-active species, conditions that are challenging to address using standard methods based on conventional macroelectrodes. The versatility of our approach allows for characterization of a wide range of reactions including intermolecular cyclization, hydrolysis, and the decomposition of candidate molecules for redox flow batteries at variable concentration and water content. Overall, this new experimental platform presents a straightforward automated method to assess the degradation of redox species in solution with sufficient flexibility to enable high-throughput workflows.

A Complex Investigation of LATP Ceramic Stability and LATP+PVDF Composite Membrane Performance: The Effect of Solvent in Tape-Casting Fabrication

Redox flow batteries (RFBs) are a prospective energy storage platform to mitigate the discrepancy between barely adjustable energy production and fluctuating demand. The energy density and affordability of RFBs can be improved significantly through the transition from aqueous systems to non-aqueous (NAq) due to their wider electrochemical stability window and better solubility of active species. However, the NAqRFBs suffer from a lack of effective membranes with high ionic conductivity (IC), selectivity (low permeability), and stability. Here, we for the first time thoroughly analyse the impact of tape-casting solvents (dimethylformamide-DMF; dimethylsulfoxide-DMSO; N-methyl-2-pyrrolidone-NMP) on the properties of the composite Li-conductive membrane (Li_1.3Al_0.3Ti_1.7(PO₄)₃ filler within poly(vinylidene fluoride) binder-LATP+PVDF). We show that the prolonged exposure of LATP to the studied solvents causes slight morphological, elemental, and intrastructural changes, dropping ceramic's IC from 3.1 to 1.6-1.9 ∙ 10^-4 S cm^-1. Depending on the solvent, the final composite membranes exhibit IC of 1.1-1.7 ∙ 10^-4 S cm^-1 (comparable with solvent-treated ceramics) along with correlating permeability coefficients of 2.7-3.1 ∙ 10^-7 cm² min^-1. We expect this study to complement the understanding of how the processes underlying the membrane fabrication impact its functional features and to stimulate further in-depth research of NAqRFB membranes.

Molecular Engineering of Organic Species for Aqueous Redox Flow Batteries

Redox flow batteries (RFBs) are promising candidates for large-scale energy storage systems (ESSs) due to their unique architecture that can decouple energy and power. Aqueous RFBs based on organic molecules (AORFBs) work with a non-flammable and intrinsically safe aqueous electrolyte, and organic compounds are performed as redox couples. The application of redox-active organics tremendously expands the development space of RFBs owing to the highly tunable molecule structure. Molecular engineering enables the exceptional merits in solubility, stability, and redox potential of different organic molecules. Herein, this review summarizes the application of molecular engineering to several organic compounds, focusing on the fundamental overview of their physicochemical properties and design strategies. We discuss the electrochemical merits and performances along with the intrinsic properties of the designed organic components. Finally, we outline the requirements for rational design of innovative organics to motivate more valuable research and present the prospect of molecule engineering used in AORFBs.

Current Distribution in the Discharge Unit of a 10-Cell Vanadium Redox Flow Battery: Comparison of the Computational Model with Experiment

Shunting currents are among the main problems of all-vanadium redox flow battery stacks since, in addition to capacity losses, they cause negative effects associated with the local destruction of electrodes and bipolar plates. The values of both the shunting currents and their destructive effects on materials can be reduced at the battery development stage by adjusting the resistance of the electrolyte supply channels. The solution to this problem can be found using a calculation model for current distribution based on the current balance in the nodes as well as voltage drops and electromotive force in internal circuits according to Kirchhoff's laws. This paper presents the verification of the model of current distribution in an all-vanadium redox flow battery stack of an original design that allows for the determination of membrane-electrode assembly resistances and electrolyte supply channels via direct measurements. Based on a comparison of the calculated and experimental values of the coulombic efficiency of charge-discharge cycles, the capacity fade associated with the crossover of vanadium compounds through the membrane has been determined.

Resistance Breakdown of a Membraneless Hydrogen-Bromine Redox Flow Battery

A key bottleneck to society's transition to renewable energy is the lack of cost-effective energy storage systems. Hydrogen-bromine redox flow batteries are seen as a promising solution, due to the use of low-cost reactants and highly conductive electrolytes, but market penetration is prevented due to high capital costs, for example due to costly membranes to prevent bromine crossover. Membraneless hydrogen-bromine cells relying on colaminar flows have thus been investigated, showing high power density nearing 1 W/cm². However, no detailed breakdown of resistance losses has been performed to-date, a knowledge gap which impedes further progress. Here, we characterize such a battery, showing the main sources of loss are the porous cathode, due to both Faradaic and Ohmic losses, followed by Ohmic losses in the electrolyte channel, with all other sources relatively minor contributors. We further develop and fit analytical expressions for the impedance of porous electrodes in high power density electrochemical cells to impedance measurements from our battery, which enabled the detailed cell resistance breakdown and determination of important electrode parameters such as volumetric exchange current density and specific capacitance. The insights developed here will enable improved engineering designs to unlock exceptionally high-power density membraneless flow batteries.

Sponge-Like Microfiber Electrodes for High-Performance Redox Flow Batteries

Fabricating fiber-based electrodes with a large specific surface area while maintaining high flow permeability is a challenging issue in developing high-performance redox flow batteries. Here, a sponge-like microfiber carbon electrode is reported with a specific surface area of as large as 853.6 m² g^-1 while maintaining a fiber diameter in the range of 5-7 µm and a macropore size of ≈26.8 µm. The electrode is developed by electrospinning cross-linked poly(vinyl alcohol)-lignin-polytetrafluoroethylene precursors, followed by oxidation and pyrolysis. Applying the as-synthesized electrodes to a vanadium redox flow battery enables the battery to achieve an energy efficiency of 79.1% at the current density of 400 mA cm^-2 and a capacity retention rate of 99.94% over 2000 cycles, representing one of the best battery performances in the open literature. The strategy to fabricate sponge-like porous carbon microfibers holds great promise for versatile applications in redox flow batteries and other energy storage systems.

Mixture of Anthraquinone Sulfo-Derivatives as an Inexpensive Organic Flow Battery Negolyte: Optimization of Battery Cell

Anthraquinone-2,7-disulfonic acid (2,7-AQDS) is a promising organic compound, which is considered as a negolyte for redox flow batteries as well as for other applications. In this work we carried out a well-known reaction of anthraquinone sulfonation to synthesize 2,7-AQDS in mixture with other sulfo-derivatives, namely 2,6-AQDS and 2-AQS. Redox behavior of this mixture was evaluated with cyclic voltammetry and was almost identical to 2,7-AQDS. Mixture was then assessed as a potential negolyte of anthraquinone-bromine redox flow battery. After adjusting membrane-electrode assembly composition (membrane material and flow field)), the cell demonstrated peak power density of 335 mW cm^-2 (at SOC 90%) and capacity utilization, capacity retention and energy efficiency of 87.9, 99.6 and 64.2%, respectively. These values are almost identical or even higher than similar values for flow battery with 2,7-AQDS as a negolyte, while the price of mixture is significantly lower. Therefore, this work unveils the promising possibility of using a mixture of crude sulfonated anthraquinone derivatives mixture as an inexpensive negolyte of RFB.

Taurine Electrografting onto Porous Electrodes Improves Redox Flow Battery Performance

The surface properties of porous carbonaceous electrodes govern the performance, durability, and ultimately the cost of redox flow batteries (RFBs). State-of-the-art carbon fiber-based electrode interfaces suffer from limited kinetic activity and incomplete wettability, fundamentally limiting the performance. Surface treatments for electrodes such as thermal and acid activation are a common practice to make them more suitable for aqueous RFBs; however, these treatments offer limited control over the desired functional properties. Here, we propose, for the first time, electrografting as a facile, rapid, and versatile technique to enable task-specific functionalization of porous carbonaceous electrodes for use in RFBs. Electrografting allows covalent attachment of organic molecules on conductive substrates upon application of an electrochemical driving force, and the vast library of available organic molecules can unlock a broad range of desired functional properties. To showcase the potential of electrografting for RFBs, we elect to investigate taurine, an amine with a highly hydrophilic sulfonic acid tail. Oxidative electrografting with cyclic voltammetry allows covalent attachment of taurine through the amine group to the fiber surface, resulting in taurine-functionalized carbon cloth electrodes. In situ polarization and impedance spectroscopy in single-electrolyte flow cells reveal that taurine-treated cloth electrodes result in 40% lower charge transfer and 25% lower mass transfer resistances than off-the-shelf cloth electrodes. We find that taurine-treated electrode interfaces promote faster Fe³⁺ reduction reaction kinetics as the electrochemical surface area normalized current densities are 2-fold and 4-fold higher than oxidized and untreated glassy carbon surfaces, respectively. Improved mass transfer of taurine-treated electrodes is attributed to their superior wettability, as revealed by operando neutron radiography within a flow cell setup. Through demonstrating promising results for aqueous systems with the model molecule taurine, this work aims to bring forth electrografting as a facile technique to tailor electrode surfaces for other RFB chemistries and electrochemical technologies.

Efficient Low-Grade Heat Conversion and Storage with an Activity-Regulated Redox Flow Cell via a Thermally Regenerative Electrochemical Cycle

Efficient and cost-effective technologies are highly desired to convert the tremendous amount of low-grade waste heat to electricity. Although the thermally regenerative electrochemical cycle (TREC) has attracted increasing attention recently, the unsatisfactory thermal-to-electrical conversion efficiency and low power density limit its practical applications. In this work, a thermosensitive Nernstian-potential-driven strategy in the TREC system is demonstrated to boost its temperature coefficient, power density, and thermoelectric conversion efficiency by rationally regulating the activities of redox couples at different temperatures. With a Zn anode and [Fe(CN)₆ ]^4-/3- -guanidinium as the catholyte, the TREC flow cell presents an unprecedented average temperature coefficient of -3.28 mV K^-1 , and achieves an absolute thermoelectric efficiency of 25.1% and apparent thermoelectric efficiency of 14.9% relative to the Carnot efficiency in the temperature range of 25-50 °C at 1 mA cm^-2 . In addition, a thermoelectric power density of 1.98 mW m^-2 K^-2 is demonstrated, which is more than 7 times the highest power density of reported TREC systems. This activity regulation strategy can inspire research into high-efficiency and high-power TREC devices for practical low-grade heat harnessing.

Redox Targeting of Energy Materials for Energy Storage and Conversion

The redox-targeting (RT) process or redox-mediated process, which provides great operation flexibility in circumventing the constraints intrinsically posed by the conventional electrochemical systems, is intriguing for various energy storage and conversion applications. Implementation of the RT reactions in redox-flow cells, which involves a close-loop electrochemical-chemical cycle between an electrolyte-borne redox mediator and an energy storage or conversion material, not only boosts the energy density of flow battery system, but also offers a versatile research platform applied to a wide variety of chemistries for different applications. Here, the recent progress of RT-based energy storage and conversion systems is summarized and great versatility of RT processes for various energy-related applications is demonstrated, particularly for large-scale energy storage, spatially decoupled water electrolysis, electrolytic N₂ reduction, thermal-to-electrical conversion, spent battery material recycling, and more. The working principle, materials aspects, and factors dictating the operation are highlighted to reveal the critical roles of RT reactions for each application. In addition, the challenges lying ahead for deployment are stated and recommendations for addressing these constraints are provided. It is anticipated that the RT concept of energy materials will provide important implications and eventually offer a credible solution for advanced large-scale energy storage and conversion.

Carbon disulfide: A redox mediator for organodisulfides in redox flow batteries

Organodisulfides (RSSR) are a class of promising active materials for redox flow batteries (RFBs). However, their sluggish kinetics and poor cyclic stability remain a formidable challenge. Here, we propose carbon disulfide (CS2) as a unique redox mediator involving reversible C-S bond formation/breakage to facilitate the reduction reaction of organodisulfides in RFBs. In the discharge of RSSR, CS2 interacts with the negatively charged RSSR-• to promote cleavage of the S-S bond by reducing about one-third of the energy barrier, forming RSCS2Li. In the recharge, CS2 is unbonded from RSCS2Li while RSSR is regenerated. Meanwhile, the redox mediator can also be inserted into the molecular structure of RSSR to form RSCS2SR/RSCS2CS2SR, and these new active materials with lower energy barriers can further accelerate the reaction kinetics of RSSR. With CS2, phenyl disulfide exhibits an exceptional rate capability and cyclability of 500 cycles. An average energy efficiency of >90% is achieved. This strategy provides a unique redox-mediating pathway involving C-S bond formation/breakage with the active species, which is different from those used in lithium-oxygen or other batteries.

Smart Flow Electrosynthesis and Application of Organodisulfides in Redox Flow Batteries

Electrochemical techniques have been recognized as an environmentally friendly and sustainable synthetic way to form organodisulfides. However, searching for optimum conditions which suffers from time/material-consuming caused by the uncertainty of reactant consumption has hindered its rapid and large-scale development. Inspired by advanced nonaqueous redox flow batteries (NARFBs) technology, it is proposed a smart flow electrosynthesis (SFE) method of organodisulfides that the voltage curve of NARFBs can be utilized as a precise indicator to reflect the desired information about reactants and distinguish the end point of reaction automatically. This electrochemical method also exhibits certain universality and scalability. Additionally, organodisulfides generated in electrolytes can be used as active species for NARFBs without further purification, and their electrochemical properties are easily adjusted by changing raw materials, which effectively alleviate the waste in complex synthesis steps for optimizing and designing active materials separately. An organodisulfide dervied from isopropyl alcohol and carbon disulfide shows excellent cycling life (1000 cycles) with low capacity fade rate (0.024% per cycle). Taking advantages of the inherent NARFBs, this work not only proves a SFE strategy, but also supplies a green and low-cost molecular engineering scheme for designing electroactive materials for energy storage.

Synthesis and Characterization of Lithium-Conducting Composite Polymer-Ceramic Membranes for Use in Nonaqueous Redox Flow Batteries

Redox flow batteries (RFBs) are a burgeoning electrochemical platform for long-duration energy storage, but present embodiments are too expensive for broad adoption. Nonaqueous redox flow batteries (NAqRFBs) seek to reduce system costs by leveraging the large electrochemical stability window of organic solvents (>3 V) to operate at high cell voltages and to facilitate the use of redox couples that are incompatible with aqueous electrolytes. However, a key challenge for emerging nonaqueous chemistries is the lack of membranes/separators with suitable combinations of selectivity, conductivity, and stability. Single-ion conducting ceramics, integrated into a flexible polymer matrix, may offer a pathway to attain performance attributes needed for enabling competitive nonaqueous systems. Here, we explore composite polymer-inorganic binder-filler membranes for lithium-based NAqRFBs, investigating two different ceramic compounds with NASICON-type (NASICON: sodium (Na) superionic conductor) crystal structure, Li_1.3Al_0.3Ti_1.7(PO₄)₃ (LATP) and Li_1.4Al_0.4Ge_0.2Ti_1.4(PO₄)₃ (LAGTP), each blended with a polyvinylidene fluoride (PVDF) polymeric matrix. We characterize the physicochemical and electrochemical properties of the synthesized membranes as a function of processing conditions and formulation using a range of microscopic and electrochemical techniques. Importantly, the electrochemical stability window of the as-prepared membranes lies between 2.2-4.5 V vs Li/Li⁺. We then integrate select composite membranes into a single electrolyte flow cell configuration and perform polarization measurements with different redox electrolyte compositions. We find that mechanically robust, chemically stable LATP/PVDF composites can support >40 mA cm^-2 at 400 mV cell overpotential, but further improvements are needed in selectivity. Overall, the insights gained through this work begin to establish the foundational knowledge needed to advance composite polymer-inorganic membranes/separators for NAqRFBs.

Enhanced Performance of Zn/Br Flow Battery Using N-Methyl-N-Propylmorpholinium Bromide as Complexing Agent

Redox flow batteries (RFB) are one of the most interesting technologies in the field of energy storage, since they allow the decoupling of power and capacity. Zinc–bromine flow batteries (ZBFB) are a type of hybrid RFB, as the capacity depends on the effective area of the negative electrode (anode), on which metallic zinc is deposited during the charging process. Gaseous bromine is generated at the positive electrode (cathode) during the charging process, so the use of bromine complexing agents (BCA) is very important. These BCAs are quaternary amines capable of complexation with bromine and generating an organic phase, immiscible with the aqueous electrolyte. One of the most commonly used BCAs in RFB technology is 4-methylethylmorpholinium bromide (MEM-Br). In this work, an alternative quaternary amine 4-methylpropylmorpholinium bromide (MPM-Br) was studied. MPM-Br was integrated into the electrolyte, and 200 charge–discharge cycles were performed on the resulting ZBFBs. The obtained results were compared with those when MEM-Br was used, and it was observed that the electrolyte with MPM-Br displays a higher resistance in voltage and higher energy efficiency, making it a promising alternative to MEM-Br.

Size Effect of Organosulfur and In Situ Formed Oligomers Enables High-Utilization Na-Organosulfur Batteries

Organosulfurs are promising cathode materials for rechargeable metal batteries due to their high capacities, diverse structures, and electrochemical properties. Herein, the electrochemical behavior of three organosulfur compounds, i.e., 4,4'-thiobisbenzenethiol (TBBT), 1,4-benzenedithiol (1,4-BDT), and diphenyl disulfide (DPDS), is revealed in room-temperature rechargeable sodium (Na) batteries, which show significantly improved performances when sodiated Nafion membranes are used. Large oligomers of organosulfur can be formed during charging, and they are readily blocked by the nanosized ion-conducting clusters in the Nafion membrane. In addition, large organosulfur monomers can also be blocked. Only 5.4% of TBBT diffuses through the Nafion membrane after 800 h. The Na|TBBT cell sustains 77% of the theoretical capacity after 300 cycles (2420 h). Moreover, the Na|TBBT redox flow cell shows promising rechargeability. Due to the medium molecular size, the organosulfur oligomers are expected to provide a new avenue to develop high-capacity chalcogen cathodes, besides inorganic S and S-containing polymers.

A Computational Protocol Combining DFT and Cheminformatics for Prediction of pH-Dependent Redox Potentials

Discovering new materials for energy storage requires reliable and efficient protocols for predicting key properties of unknown compounds. In the context of the search for new organic electrolytes for redox flow batteries, we present and validate a robust procedure to calculate the redox potentials of organic molecules at any pH value, using widely available quantum chemistry and cheminformatics methods. Using a consistent experimental data set for validation, we explore and compare a few different methods for calculating reaction free energies, the treatment of solvation, and the effect of pH on redox potentials. We find that the B3LYP hybrid functional with the COSMO solvation method, in conjunction with thermal contributions evaluated from BLYP gas-phase harmonic frequencies, yields a good prediction of pH = 0 redox potentials at a moderate computational cost. To predict how the potentials are affected by pH, we propose an improved version of the Alberty-Legendre transform that allows the construction of a more realistic Pourbaix diagram by taking into account how the protonation state changes with pH.

A Chemistry and Microstructure Perspective on Ion-Conducting Membranes for Redox Flow Batteries

Redox flow batteries (RFBs) are among the most promising grid-scale energy storage technologies. However, the development of RFBs with high round-trip efficiency, high rate capability, and long cycle life for practical applications is highly restricted by the lack of appropriate ion-conducting membranes. Promising RFB membranes should separate positive and negative species completely and conduct balancing ions smoothly. Specific systems must meet additional requirements, such as high chemical stability in corrosive electrolytes, good resistance to organic solvents in nonaqueous systems, and excellent mechanical strength and flexibility. These rigorous requirements put high demands on the membrane design, essentially the chemistry and microstructure associated with ion transport channels. In this Review, we summarize the design rationale of recently reported RFB membranes at the molecular level, with an emphasis on new chemistry, novel microstructures, and innovative fabrication strategies. Future challenges and potential research opportunities within this field are also discussed.

Novel, Stable Catholyte for Aqueous Organic Redox Flow Batteries: Symmetric Cell Study of Hydroquinones with High Accessible Capacity

Owing to their broad range of redox potential, quinones/hydroquinones can be utilized for energy storage in redox flow batteries. In terms of stability, organic catholytes are more challenging than anolytes. The two-electron transfer feature adds value when building all-quinone flow battery systems. However, the dimerization of quinones/hydroquinones usually makes it difficult to achieve a full two-electron transfer in practical redox flow battery applications. In this work, we designed and synthesized four new hydroquinone derivatives bearing morpholinomethylene and/or methyl groups in different positions on the benzene ring to probe molecular stability upon battery cycling. The redox potential of the four molecules were investigated, followed by long-term stability tests using different supporting electrolytes and cell cycling methods in a symmetric flow cell. The derivative with two unoccupied ortho positions was found highly unstable, the cell of which exhibited a capacity decay rate of ~50% per day. Fully substituted hydroquinones turned out to be more stable. In particular, 2,6-dimethyl-3,5-bis(morpholinomethylene)benzene-1,4-diol (asym-O-5) displayed a capacity decay of only 0.45%/day with four-week potentiostatic cycling at 0.1 M in 1 M H₃PO₄. In addition, the three fully substituted hydroquinones displayed good accessible capacity of over 82%, much higher than those of conventional quinone derivatives.

Composite Anion-Exchange Membrane Fabricated by UV Cross-Linking Vinyl Imidazolium Poly(Phenylene Oxide) with Polyacrylamides and Their Testing for Use in Redox Flow Batteries

Composite anion-exchange membranes (AEMs) consisting of a porous substrate and a vinyl imidazolium poly(phenylene oxide) (VIMPPO)/acrylamide copolymer layer were fabricated in a straightforward process, for use in redox flow batteries. The porous substrate was coated with a mixture of VIMPPO and acrylamide monomers, then subsequently exposed to UV irradiation, in order to obtain a radically cured ion-exchange coating. Combining VIMPPO with low-value reagents allowed to significantly reduce the amount of synthesized ionomer used to fabricate the mem- brane down to 15%. Varying the VIMPPO content also allowed tuning the ionic transport properties of the resulting AEM. A series of membranes with different VIMPPO/acrylamides ratios were prepared to assess the optimal composition by studying the changes of membranes properties-water uptake, area resistivity, permeability, and chemical stability. Characterization of the membranes was followed by cycling experiments in a vanadium RFB (VRFB) cell. Among three composite membranes, the one with VIMPPO 15% w/w-reached the highest energy efficiency (75.1%) matching the performance of commercial ion-exchange membranes (IEMs) used in VRFBs (Nafion® N 115: 75.0% and Fumasep® FAP 450: 73.0%). These results showed that the proposed composite AEM, fabricated in an industrially oriented process, could be considered to be a lower-cost alternative to the benchmarked IEMs.

Silica Containing Composite Anion Exchange Membranes by Sol-Gel Synthesis: A Short Review

This short review summarizes the literature on composite anion exchange membranes (AEM) containing an organo-silica network formed by sol–gel chemistry. The article covers AEM for diffusion dialysis (DD), for electrochemical energy technologies including fuel cells and redox flow batteries, and for electrodialysis. By applying a vast variety of organically modified silica compounds (ORMOSIL), many composite AEM reported in the last 15 years are based on poly (vinylalcohol) (PVA) or poly (2,6-dimethyl-1,4-phenylene oxide) (PPO) used as polymer matrix. The most stringent requirements are high permselectivity and water flux for DD membranes, while high ionic conductivity is essential for electrochemical applications. Furthermore, the alkaline stability of AEM for fuel cell applications remains a challenging problem that is not yet solved. Possible future topics of investigation on composite AEM containing an organo-silica network are also discussed.

A Zn-Ce Redox Flow Battery with Ethaline Deep Eutectic Solvent

Compared with conventional aqueous and ionic liquid electrolytes, deep eutectic solvent (DES) are considered as electrolyte for redox flow batteries because they have a wider electrochemical window and relatively low price. In this study, Ce^IV /Ce^III and Zn^II /Zn redox couples are used as the positive and negative active materials, respectively, in an electrolyte consisting of choline chloride ethylene glycol (ethaline). The structure of Ce^III in the positive electrolyte is inferred through spectrum detection. Ce^IV /Ce^III and Zn^II /Zn redox couples show a stable potential difference of 2.2 V (vs. Ag) through cyclic voltammetry. The charge and discharge performance of battery was tested at different current densities. In addition, battery performance was evaluated at different temperatures and concentrations of cerium in the electrolyte. Consequently, at a current density of 0.5 mA cm^-2 at room temperature and using 1.0 m Ce^III , the battery performance reaches the best coulombic efficiency of 84 %.

Non-Solvent Induced Phase Separation Enables Designer Redox Flow Battery Electrodes

Porous carbonaceous electrodes are performance-defining components in redox flow batteries (RFBs), where their properties impact the efficiency, cost, and durability of the system. The overarching challenge is to simultaneously fulfill multiple seemingly contradictory requirements-i.e., high surface area, low pressure drop, and facile mass transport-without sacrificing scalability or manufacturability. Here, non-solvent induced phase separation (NIPS) is proposed as a versatile method to synthesize tunable porous structures suitable for use as RFB electrodes. The variation of the relative concentration of scaffold-forming polyacrylonitrile to pore-forming poly(vinylpyrrolidone) is demonstrated to result in electrodes with distinct microstructure and porosity. Tomographic microscopy, porosimetry, and spectroscopy are used to characterize the 3D structure and surface chemistry. Flow cell studies with two common redox species (i.e., all-vanadium and Fe^2+/3+ ) reveal that the novel electrodes can outperform traditional carbon fiber electrodes. It is posited that the bimodal porous structure, with interconnected large (>50 µm) macrovoids in the through-plane direction and smaller (<5 µm) pores throughout, provides a favorable balance between offsetting traits. Although nascent, the NIPS synthesis approach has the potential to serve as a technology platform for the development of porous electrodes specifically designed to enable electrochemical flow technologies.

A Dendrite-Free Tin Anode for High-Energy Aqueous Redox Flow Batteries

Metal-based aqueous redox flow batteries (ARFBs) such as zinc-based ARFBs have attracted remarkable attention owing to their intrinsic high energy density. However, severe dendrite issues limit their efficiency and lifespan. Here an aqueous metal anode operating between Sn(OH)₆ ^2- (stannate) and metal Sn is presented, providing a reversible four-electron transfer at -0.921 V vs standard hydrogen electrode. In strong contrast to severe Zn dendrites, the Sn(OH)₆ ^2- /Sn electrode shows smooth and dendrite-free morphology, which can be attributed to its intrinsic low-surface-energy anisotropy which facilitates isotropic crystal growth of Sn metal. By coupling with iodide/tri-iodide (I^- /I₃ ^- ), the static Sn-I cell demonstrates a stable cycling for 500 cycles (more than 2 months). In contrast, the state-of-the-art Zn anode suffers from serious dendrites and lasts less than 45 cycles (190 h) in Zn-I cells. A stable continuous flow cycling of Sn-I cell achieves a Sn areal capacity of 73.07 mAh cm^-2 at an average discharge voltage of 1.3 V for 350 h. The alkaline Sn electrode demonstrates dendrite-free morphology and superior performance in cycle life and areal capacity compared to state-of-the-art Zn metal anodes, offering a promising metal anode for high-energy ARFBs and other metal-based rechargeable aqueous batteries.

General Design Methodology for Organic Eutectic Electrolytes toward High-Energy-Density Redox Flow Batteries

By virtue of strong molecular interactions, eutectic electrolytes provide highly concentrated redox-active materials without other auxiliary solvents, hence achieving high volumetric capacities and energy density for redox flow batteries (RFBs). However, it is critical to unveil the underlying mechanism in this system, which will be undoubtedly beneficial for their future research on high-energy storage systems. Herein, a general formation mechanism of organic eutectic electrolytes (OEEs) is developed, and it is found that molecules with specific functional groups such as carbonyl (CO), nitroxyl radical (NO•), and methoxy (OCH₃ ) groups can coordinate with alkali metal fluorinated sulfonylimide salts (especially for bis(trifluoromethanesulfonyl)imide, TFSI), thereby forming OEEs. Molecular designs further demonstrate that the redox-inactive methoxy group functionalized ferrocene derivative maintains the liquid OEE at both reduced and oxidized states. Over threefold increase in solubility is obtained (2.8 m for ferrocene derivative OEE) and high actual discharge energy density of 188 Wh L^-1 (75% of the theoretical value) is achieved in the Li hybrid cell. The established mechanism presents new ways of designing desirable electrolytes through molecular interactions for the development of high-energy-density organic RFBs.

Redox Targeting-Based Thermally Regenerative Electrochemical Cycle Flow Cell for Enhanced Low-Grade Heat Harnessing

A large amount of low-grade heat (<100 °C) is produced in electrical devices and mostly wasted. This type of heat without effective dissipation also causes compromised device performance, reliability, and lifespan. To tackle these issues, a redox targeting (RT)-based flow cell with judiciously designed thermoelectrically active redox materials is demonstrated for the first time for efficient heat-to-electricity conversion through a thermally regenerative electrochemical cycle (TREC). Compared with the conventional TREC systems, the RT-based flow cell not only reveals considerably enhanced thermoelectric efficiency, but the flow of redox fluids also provides a cooling function to the system. In this work, solid material Ni_0.2 Co_0.8 (OH)₂ and redox mediator [Fe(CN)₆ ]^4-/3- , both of which have negative temperature coefficient and share identical redox potential, are paired via RT-reactions to boost the capacity and meanwhile thermoelectric efficiency of a [Fe(CN)₆ ]^4-/3- /Zn^0/2+ -based flow cell. Upon operating over the TREC cycle, the RT-based flow cell converts heat to electricity at an unprecedented absolute thermoelectric efficiency of 3.61% in the temperature range of 25-55 °C.

A Zinc-Dual-Halogen Battery with a Molten Hydrate Electrolyte

Halogen redox couples offer several advantages for energy storage such as low cost, high solubility in water, and high redox potential. However, the operational complexity of storing halogens at the oxidation state via liquid-phase media hampers their widespread application in energy-storage devices. Herein, an aqueous zinc-dual-halogen battery system taking the advantages of redox flow batteries (inherent scalability) and intercalation chemistry (high capacity) is designed and fabricated. To enhance specific energy, the designed cell exploits both bromine and chlorine as the cathode redox couples that are present as halozinc complexes in a newly developed molten hydrate electrolyte, which is distinctive to the conventional zinc-bromine batteries. Benefiting from the reversible uptake of halogens at the graphite cathode, exclusive reliance on earth-abundant elements, and membrane-free and possible flow-through configuration, the proposed battery can potentially realize high-performance massive electric energy storage at a reasonable cost.

Electrolyte Flow Field Variation: A Cell for Testing and Optimization of Membrane Electrode Assembly for Vanadium Redox Flow Batteries

A great deal of research has been dedicated to improving the performance of vanadium redox flow battery (VRFB). In this work, we propose the design of a cell for testing membrane electrode assembly of VRFB, which enables the optimization of the flow field, conditions of charge-discharge tests, and the nature of components (electrodes, membrane) with minimal time and material expenses. The essence of the proposed cell is that the system of channels distributing the electrolyte is made by cutting shaped holes in the sheets of graphite foil (GF). This manner allows easy modification of the flow field configurations. Polarization curves for serpentine, interdigitated, and flow-through systems were measured according to procedures used in such studies. Cell with GF plates being tested with vanadium-sulfuric acid electrolyte, outperforms the cell with conventional graphite plates with the same parameters of the flow field. It demonstrates 734 mW cm^-2 of peak power density at SOC 50 and 84.3 % of energy efficiency at 84.5 % of electrolyte utilization under galvanostatic charge/discharge cycling with 75 mA cm^-2 .

A pH-Neutral, Aqueous Redox Flow Battery with a 3600-Cycle Lifetime: Micellization-Enabled High Stability and Crossover Suppression

Redox-flow batteries (RFBs) are a highly promising large-scale energy storage technology for mitigating the intermittent nature of renewable energy sources. Here, the design and implementation of a micellization strategy in an anthraquinone-based, pH-neutral, nontoxic, and metal-free aqueous RFB is reported. The micellization strategy (1) improves stability by protecting the redox-active anthraquinone core with a hydrophilic poly(ethylene glycol) shell and (2) increases the overall size to mitigate the crossover issue through a physical blocking mechanism. Paired with a well-established potassium ferrocyanide catholyte, the micelle-based RFB displayed an excellent capacity retention of 90.7 % after 3600 charge/discharge cycles (28.3 days), corresponding to a capacity retention of 99.67 % per day and 99.998 % per cycle. The mechanistic studies of redox-active materials were also conducted and indicated the absence of side reactions commonly observed in other anthraquinone-based RFBs. The outstanding performance of the RFB demonstrates the effectiveness of the micellization strategy for enhancing the performance of organic material-based aqueous RFBs.

Direct Measurement of Crossover and Interfacial Resistance of Ion-Exchange Membranes in All-Vanadium Redox Flow Batteries

Among various components commonly used in redox flow batteries (RFBs), the separator plays a significant role, influencing resistance to current as well as capacity decay via unintended crossover. It is well-established that the ohmic overpotential is dominated by the membrane and interfacial resistance in most aqueous RFBs. The ultimate goal of engineering membranes is to improve the ionic conductivity while keeping crossover at a minimum. One of the major issues yet to be addressed is the contribution of interfacial phenomena in the influence of ionic and water transport through the membrane. In this work, we have utilized a novel experimental system capable of measuring the ionic crossover in real-time to quantify the permeability of ionic species. Specifically, we have focused on quantifying the contributions from the interfacial resistance to ionic crossover. The trade-off between the mass and ionic transport impedance caused by the interface of the membranes has been addressed. The MacMullin number has been quantified for a series of electrolyte configurations and a correlation between the ionic conductivity of the contacting electrolyte and the Nafion® membrane has been established. The performance of individual ion-exchange membranes along with a stack of various separators have been explored. We have found that utilizing a stack of membranes is significantly beneficial in reducing the electroactive species crossover in redox flow batteries compared to a single membrane of the same fold thickness. For example, we have demonstrated that the utilization of five layers of Nafion® 211 membrane reduces the crossover by 37% while only increasing the area-specific resistance (ASR) by 15% compared to a single layer Nafion® 115 membrane. Therefore, the influence of interfacial impedance in reducing the vanadium ion crossover is substantially higher compared to a corresponding increase in ASR, indicating that mass and ohmic interfacial resistances are dissimilar. We have expanded our analysis to a combination of commercially available ion-exchange membranes and provided a design chart for membrane selection based on the application of interest (short duration/high-performance vs. long-term durability). The results of this study provide a deeper insight into the optimization of all-vanadium redox flow batteries (VRFBs).

An Organic Redox Flow Cell-Inspired Paper-Based Primary Battery

A portable paper-based organic redox flow primary battery using sustainable quinone chemistry is presented. The compact prototype relies on the capillary forces of the paper matrix to develop a quasi-steady flow of the reactants through a pair of porous carbon electrodes without the need of external pumps. Co-laminar capillary flow allows operation Under mixed-media conditions, in which an alkaline anolyte and an acidic catholyte are employed. This feature enables higher electrochemical cell voltages during discharge operation and the utilization of a wider range of available species and electrolytes and provides the advantage to form a neutral or near-neutral pH as the electrolytes neutralize at the absorbent pad, which allows a safe disposal after use. The effects of the device design parameters have been studied to enhance battery features such as power output, operational time, and fuel utilization. The device achieves a faradaic efficiency of up to 98 %, which is the highest reported in a capillary-based electrochemical power source, as well as a cell capacity of up to 11.4 Ah L^-1  cm^-2 , comparable to state-of-the-art large-scale redox flow cells.

A pH-Neutral, Metal-Free Aqueous Organic Redox Flow Battery Employing an Ammonium Anthraquinone Anolyte

Redox-active anthraquinone molecules represent promising anolyte materials in aqueous organic redox flow batteries (AORFBs). However, the chemical stability issue and corrosion nature of anthraquinone-based anolytes in reported acidic and alkaline AORFBs constitute a roadblock for their practical applications in energy storage. A feasible strategy to overcome these issues is migrating to pH-neutral conditions and employing soluble AQDS salts. Herein, we report the 9,10-anthraquinone-2,7-disulfonic diammonium salt AQDS(NH₄ )₂ , as an anolyte material for pH-neutral AORFBs with solubility of 1.9 m in water, which is more than 3 times that of the corresponding sodium salt. Paired with an NH₄ I catholyte, the resulting pH-neutral AORFB with an energy density of 12.5 Wh L^-1 displayed outstanding cycling stability over 300 cycles. Even at the pH-neutral condition, the AQDS(NH₄ )₂  /NH₄ I AORFB delivered an impressive energy efficiency of 70.6 % at 60 mA cm^-2 and a high power density of 91.5 mW cm^-2 at 100 % SOC. The present AQDS(NH₄ )₂ flow battery chemistry opens a new avenue to apply anthraquinone molecules in developing low-cost and benign pH-neutral flow batteries for scalable energy storage.

Enzyme-Inspired Formulation of the Electrolyte for Stable and Efficient Vanadium Redox Flow Batteries at High Temperatures

Histidine, inspired by vanadium bromoperoxidase enzyme, has been applied as a homogeneous electrocatalyst to the positive electrolyte of vanadium redox flow battery (VRFB) to improve the performance and stability of VRFB at elevated temperatures. The histidine-containing electrolyte is found to significantly improve the performance of VRFB in terms of thermal stability estimated by the remaining amount of VO₂⁺ in the electrolyte (61 vs 43% of a pristine one), energy efficiency at a high current density of 150 mA cm^-2 (78.7 vs 71.2%), and capacity retention (73.2 vs 27.7%) at 60 °C. The mechanism of the catalytic functions of histidine with the chemical species in the electrolyte has been investigated for the first time by multinuclear NMR spectroscopy and first-principles calculations. The analyzed data reveal that histidine improves the kinetics of both charge and discharge reactions through different affinity toward the reactants and products as well as suppresses the precipitation of VO₂⁺ by impeding the polymerization of vanadium ions. These findings are in good agreement with the improved chemical and electrochemical performance of the histidine-containing VRFB. Our results show a new type of chemical/electrochemical mechanism in the improved redox flow battery performance that may be essential in a new research arena for better performance of electrochemical systems.

Concurrent nanoscale surface etching and SnO2 loading of carbon fibers for vanadium ion redox enhancement

Facile and efficient methods to prepare active electrodes for redox reactions of electrolyte ions are required to produce efficient and low-cost redox flow batteries (RFBs). Carbon-fiber electrodes are widely used in various types of RFBs and surface oxidation is commonly performed to enhance the redox reactions, although it is not necessarily efficient. Quite recently, a technique for nanoscale and uniform surface etching of the carbon fiber surface was developed and a significant enhancement of the negative electrode reaction of vanadium redox flow batteries was attained, although the enhancement was limited to the positive electrode reaction. In this study, we attempted to obtain an additional enhancement effect of metal-oxide nanoparticles without the need for further processing steps. A coating with carbonaceous thin films was obtained coating by sublimation, deposition, and pyrolysis of tin(II) phthalocyanine (SnPc) on a carbon fiber surface in a single heat-treatment step. The subsequent thermal oxidation concurrently achieved nanoscale surface etching and loading with SnO₂ nanoparticles. The nanoscale-etched and SnO₂-loaded surface was characterized by field-emission scanning electron microscopy (FESEM), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). The activity for the vanadium ion redox reactions was evaluated by cyclic voltammetry (CV) to demonstrate the enhancement of both the positive and negative electrode reactions. A full cell test of the vanadium redox flow battery (VRFB) showed a significant decrease of the overpotential and a stable cycling performance. A facile and efficient technique based on the nanoscale processing of the carbon fiber surface was presented to substantially enhance the activity for the redox reactions in redox flow batteries.

Leveraging Nanoparticle Dispersion State To Tune Vanadium Ion Selectivity of Nanophase-Segregated Ionomer Nanocomposites for Redox Flow Batteries

Ionomer nanocomposites provide a promising solution to address ion crossover issues inherent to traditional ion-containing membranes used in batteries for grid-scale energy storage (e.g., vanadium redox flow batteries). Herein, we investigate the impact of nanoparticle surface chemistry on nanoparticle dispersion, membrane morphology, and vanadium ion permeability in a series of Nafion nanocomposites. Specifically, silica nanoparticles (SiNPs) were functionalized with various chemical moieties, seven in total, that electrostatically interact, either attractively or repulsively, with the sulfonic acid groups that coalesce to form the ionic network within Nafion. As seen from electron microscopy analysis of the nanocomposites, SiNPs with sulfonic acid end-functionality were, on average, well dispersed within the ionomer membrane, though increased vanadium ion permeability, as compared to pristine (or unmodified) Nafion, was observed and attributed to changes in the Donnan potential of the system. In contrast, SiNPs with amine end-functionality were, on average, observed to form large aggregates within the ionomer membrane. Surprisingly, nanocomposites containing a higher degree of nanoparticle aggregation demonstrated the lowest vanadium ion permeability. Fractal analysis of the low-Q small-angle neutron scattering data suggests that the interface between the ionomer and the SiNP surface transitions from rough to smooth when the nanoparticle surface is changed from sulfonic acid-functionalized to amine-functionalized.

Redox-Targeting-Based Flow Batteries for Large-Scale Energy Storage

Redox-targeting reactions of battery materials by redox molecules are extensively studied for energy storage since the first report in 2006. Implementation of the "redox-targeting" concept in redox flow batteries presents not only an innovative idea of battery design that considerably boosts the energy density of flow-battery system, but also an intriguing research platform applied to a wide variety of chemistries for different applications. Here, a critical overview of the recent progress in redox-targeting-based flow batteries is presented and the development of the technology in the various aspects from mechanistic understanding of the reaction kinetics to system optimization is highlighted. The limitations presently lying ahead for the widespread applications of "redox targeting" are also identified and recommendations for addressing the constraints are given. The adequate development of the redox-targeting concept should provide a credible solution for advanced large-scale energy storage in the near future.

Acid Pretreatment to Enhance Proton Transport of a Polysulfone-Polyvinylpyrrolidone Membrane for Application in Vanadium Redox Flow Batteries

An acid pretreatment strategy is developed to enhance the proton transport of polysulfone-polyvinylpyrrolidone (PSF-PVP) membranes for application in vanadium redox flow batteries (VRFB). The acid pretreatment leads to the formation of ionic conducting clusters with a size of around d=15.41 nm in the membrane (p-PSF-PVP). As a result, the proton conductivity and proton/vanadium ion selectivity of the p-PSF-PVP membrane increases to 6.60×10^-2  S cm^-1 and 10.63×10⁷  S min cm^-3 , respectively, values significantly higher than 2.30×10^-2  S cm^-1 and 6.67×10⁷  S min cm^-3 of the pristine PSF-PVP membrane. Moreover, a VRFB assembled with the p-PSF-PVP membrane exhibits a high coulombic efficiency of 98.6 % and an outstanding energy efficiency of 88.5 %. The results indicate that treatment with either sulfuric acid or phosphoric acid leads to an improvement of membrane properties, and the acid pretreatment is a promising strategy to significantly enhance the performance of the PSF-PVP membrane for VRFB application.

Integrated Photoelectrochemical Solar Energy Conversion and Organic Redox Flow Battery Devices

Building on regenerative photoelectrochemical solar cells and emerging electrochemical redox flow batteries (RFBs), more efficient, scalable, compact, and cost-effective hybrid energy conversion and storage devices could be realized. An integrated photoelectrochemical solar energy conversion and electrochemical storage device is developed by integrating regenerative silicon solar cells and 9,10-anthraquinone-2,7-disulfonic acid (AQDS)/1,2-benzoquinone-3,5-disulfonic acid (BQDS) RFBs. The device can be directly charged by solar light without external bias, and discharged like normal RFBs with an energy storage density of 1.15 Wh L^-1 and a solar-to-output electricity efficiency (SOEE) of 1.7 % over many cycles. The concept exploits a previously undeveloped design connecting two major energy technologies and promises a general approach for storing solar energy electrochemically with high theoretical storage capacity and efficiency.

Molecular Engineering with Organic Carbonyl Electrode Materials for Advanced Stationary and Redox Flow Rechargeable Batteries

Organic carbonyl electrode materials that have the advantages of high capacity, low cost and being environmentally friendly, are regarded as powerful candidates for next-generation stationary and redox flow rechargeable batteries (RFBs). However, low carbonyl utilization, poor electronic conductivity and undesired dissolution in electrolyte are urgent issues to be solved. Here, we summarize a molecular engineering approach for tuning the capacity, working potential, concentration of active species, kinetics, and stability of stationary and redox flow batteries, which well resolves the problems of organic carbonyl electrode materials. As an example, in stationary batteries, 9,10-anthraquinone (AQ) with two carbonyls delivers a capacity of 257 mAh g^-1 (2.27 V vs Li⁺ /Li), while increasing the number of carbonyls to four with the formation of 5,7,12,14-pentacenetetrone results in a higher capacity of 317 mAh g^-1 (2.60 V vs Li⁺ /Li). In RFBs, AQ, which is less soluble in aqueous electrolyte, reaches 1 M by grafting -SO₃ H with the formation of 9,10-anthraquinone-2,7-disulphonic acid, resulting in a power density exceeding 0.6 W cm^-2 with long cycling life. Therefore, through regulating substituent groups, conjugated structures, Coulomb interactions, and the molecular weight, the electrochemical performance of carbonyl electrode materials can be rationally optimized. This review offers fundamental principles and insight into designing advanced carbonyl materials for the electrodes of next-generation rechargeable batteries.

Liquid Quinones for Solvent-Free Redox Flow Batteries

Liquid benzoquinone and naphthoquinone having diethylene glycol monomethyl ether groups are designed and synthesized as redox active materials that dissolve supporting electrolytes. The Li-ion batteries based on the liquid quinones using LiBF₄ /PC show good performance in terms of voltage, capacity, energy efficiency, and cyclability in both static and flow modes. A battery is constructed without using intentionally added organic solvent, and its high energy density (264 W h L^-1 ) demonstrates the potential of solvent-free organic redox flow batteries using liquid active materials.