Anesthetic management of a patient with Sturge-Weber syndrome in sagittal split ramus osteotomy surgery

Sturge-Weber syndrome (SWS) is a neurocutaneous syndrome characterized by angiomas. This report presents airway management using submental intubation in sagittal split ramus osteotomy under general anesthesia and aimed to explore better anesthetic management for avoiding the rupture of angiomas in a patient with SWS.

[Application and development of orthognathic surgery in treatment of syndromic craniosynostosis]

Objective

To summarize the application and recent development of orthognathic surgery in treating syndromic craniosynostosis.

Methods

The related literature at home and abroad in recent years was extensively reviewed, and the indications, routine procedures, and protocols of orthognathic surgery in the treatment of syndromic craniosynostosis were summarized and analyzed.

Results

Craniosynostosis is a common congenital craniofacial malformation. Syndromic craniosynostosis usually involves premature fusion of multiple cranial sutures and is associated with other deformities. Orthognathic surgery is the necessary and effective means to improve the midfacial hypoplasia and malocclusion. Le Fort I osteotomy combined with sagittal split ramus osteotomy are the common surgical options. Orthognathic surgery should combine with craniofacial surgery and neurosurgery, and a comprehensive long-term evaluation should be conducted to determine the best treatment plan.

Conclusion

Orthognathic surgery plays an important role in the comprehensive diagnosis and treatment of syndromic craniosynostosis. The development of digital technology will further promote the application and development of orthognathic surgery in the treatment of syndromic craniosynostosis.

Morphological Study of the Mandibular Lingula and Antilingula by Cone-Beam Computed Tomography

The patterns of the lingula and antilingula are crucial surgical reference points for ramus osteotomy. Cone-beam computed tomography (CBCT) provides three-dimensional images, and patient radiation dose is significantly lower for CBCT than for medical CT. The morphology of the mandibular lingula and antilingula of ninety patients (180 sides) were investigated using CBCT. The lingula were classified as having triangular, truncated, nodular, and assimilated shapes. The antilingula were classified as having hill, ridge, plateau, and plain shapes. The patients' sex, skeletal patterns (Classes I, II, and III), and right and left sides were recorded. The most to least common lingula shapes were nodular (37.8%), followed by truncated (32.8%), triangular (24.4%), and assimilated (5%). The most to least common antilingulae were hill (62.8%), plain (18.9%), plateau (13.9%), and ridge (4.4%) patterns, respectively. The lingula and antilingula had identical patterns on both sides in 47 (52.2%) and 46 patients (51.1%), respectively. Sex and skeletal pattern were not significantly correlated to lingula and antilingula shapes. No significant correlation was observed between lingula and antilingula shapes.

Swallowing Functions after Sagittal Split Ramus Osteotomy with Loose Fixation for Mandibular Prognathism: A Retrospective Case Series Research

Sagittal split ramus osteotomy (SSRO) is a standard surgical technique for patients with mandibular prognathism. However, the appropriate position of the proximal fragment is not strictly defined, and rigid fixation can induce early postoperative skeletal relapse and temporomandibular (TMJ) disorders. Loose fixation can be expected to seat the proximal bone fragments in a physiologically appropriate position, thereby reducing adverse events. Although long-term skeletal stability has been achieved using SSRO without fixation, the evaluation of preoperative and postoperative eating and swallowing functions remains unclear, and this study aimed to clarify this point. We evaluated mastication time, oral transfer time, and pharyngeal transfer time using videofluorography (VF) preoperatively, two months postoperatively, and six months postoperatively, and along with the position of anatomical landmarks using cephalometric radiographs, modified water swallowing test (MWST), food test (FT), and repetitive saliva swallowing test (RSST) were used to evaluate postoperative swallowing function. Four patients (one male, three females; mean (range) age 26.5 (18-51) years) were included, with a mean setback of 9.5 mm and 6.5 mm on the right and left sides, respectively. Postoperative eating and swallowing functions were good in VF, cephalometric analysis, MWST, FT, and RSST. In the present study, good results for postoperative eating and swallowing functions were obtained in SSRO with loose fixation of the proximal and distal bone segments.

Evaluation of the Anatomic Position of the Mandibular Canal Regarding to the Segments of the Mandibular Sagittal Split Ramus Osteotomy to Diminish the Possibility of Injuries: a Pilot Study

Objectives

This pilot study evaluated the relationship between inferior alveolar nerve location through computed tomography scan and intraoperative inferior alveolar nerve entrapment after bilateral sagittal split osteotomy.

Material and Methods

Overall, 20 helicoidal computed tomography scans were evaluated in patients with facial deformities who underwent to bilateral sagittal split osteotomy (BSSO). The distance from the mandibular canal to the internal surface of the buccal and lingual cortical bone, mandibular thickness, bone density and proportion of medullary and cortical bone in 3 regions were evaluated. During the intraoperative period, the segment to which the nerve remained adhered after performing BSSO was analysed, and the data correlated.

Results

The distance from the mandibular canal to the buccal cortical bone showed a mean of 2.6 mm when the inferior alveolar nerve was adhered to the distal segment and mean of 0.7 mm when the nerve was adhered to the proximal segment. The thickness was 11.2 mm and 9.8 mm when the nerve was adhered the distal the proximal segments respectively. Mandibular thickness, distance from the mandibular canal to the buccal and lingual cortical were statistically related to intraoperative nerve entrapment (P < 0.05).

Conclusions

Narrow jaws and the distance from the mandibular canal to buccal cortical bone less than 2 mm increases the risk of the inferior alveolar nerve entrapment in bilateral sagittal split osteotomy.

Changes in Preexisting Temporomandibular Joint Clicking after Orthognathic Surgery in Patients with Mandibular Prognathism

This study aimed to investigate the changes in preexisting temporomandibular joint (TMJ) clicking and the new incidence of TMJ clicking after orthognathic surgery. A total of 60 patients (30 men and 30 women) with mandibular prognathism underwent intraoral vertical ramus osteotomy (IVRO) for a mandibular setback. The setback amount and TMJ clicking symptoms (preoperative and one year postoperative) were recorded. To assess the risk of new incidence of TMJ clicking in asymptomatic patients, the cutoff value for postoperative mandibular setback was set at 8 mm. The left and right mandibular setbacks were 11.1 and 10.9 mm in men, respectively, and 10.7 and 10.0 mm in women, respectively. Thus, no difference in setback amount on either side was observed between the sexes. The improvement rate in patients with preexisting TMJ clicking was 69.2% (18 of 26 sides); the postoperative improvement rates were 71.4% (setback amount > 8 mm) and 60% (setback amount ≤ 8 mm). IVRO may reduce the severity of preexisting TMJ clicking. A high setback amount (>8 mm) may not be associated with a considerable increase in the risk of postoperative TMJ clicking.

Experts' consensus on precaution and treatment for complications of sagittal split ramus osteotomy

Sagittal split ramus osteotomy (SSRO) is a versatile orthognathic procedure for correcting mandibular deformities. Various complications can possibly occur when performing SSRO, and it can even cause serious adverse consequences because of the complexity of anatomy and operative procedures. The types of complications and their accompanying clinical manifestations are closely related to the choice of diagnosis and treatment strategies and clinical outcomes. To discuss the causes, prevention, and treatment measures of various common complications of SSRO, domestic orthognathic surgery experts prepared this consensus to increase the awareness of SSRO complications, thereby ensuring safe surgical procedure and good results.

Virtual Reality and Three-Dimensional Printed Models Improve the Morphological Understanding in Learning Mandibular Sagittal Split Ramus Osteotomy: A Randomized Controlled Study

Background: The mandibular sagittal split ramus osteotomy (SSRO) is a routine operation performed to correct mandibular deformity including mandibular retrusion, protrusion, deficiency, and asymmetry. The SSRO remains a challenging procedure for junior surgeons due to a lack of adequate morphological knowledge necessary for success in clinical practice. Virtual reality (VR) and three-dimensional printed (3DP) models have been widely applied in anatomy education. The present randomized, controlled study was performed to evaluate the effect of traditional educational instruments, VR models, and 3DP models on junior surgeons learning the morphological information required to perform SSRO.

Methods: Eighty-one participants were randomly assigned to three learning groups: Control, VR, and 3DP. Objective and subjective tests were used to evaluate the learning effectiveness of each learning instrument. In the objective test, participants were asked to identify 10 anatomical landmarks on normal and deformed models, draw the osteotomy line, and determine the description of SSRO. In the subjective test, participants were asked to provide feedback regarding their subjective feelings about the learning instrument used in their group.

Results: The objective test results showed that the VR and 3DP groups achieved better accuracy in drawing the osteotomy line (p = 0.027) and determining the description of SSRO (p = 0.023) than the Control group. However, there was no significant difference among the three groups regarding the identification of anatomical landmarks. The VR and 3DP groups gave satisfactory subjective feedback about the usefulness in learning, good presentation, and enjoyment. The Control and 3DP groups reported positive feelings about ease of use.

Conclusion: The current findings suggest that VR and 3DP models were effective instruments that assisted in the morphological understanding of SSRO-related anatomical structures. Furthermore, 3DP models may be a promising supplementary instrument to bridge the gap between conventional learning and clinical practice.

Differences in the Buccal Bone Marrow Distance of ≤0.8 mm in the Mandible of Patients Undergoing Sagittal Split Ramus Osteotomy among the Different Skeletal Patterns: A Retrospective Study

This study investigated the relationship between the thickness of the ramus and skeletal patterns using cone-beam computed tomography (CBCT) for sagittal split ramus osteotomy. Ninety participants were categorized into three skeletal patterns (Class I, Class II, and Class III). The first vertical slice (slice 0) was observed in the intact mandibular canal, and then moved forward to 40 mm (slice 21) with a 2 mm interval. The thickness of buccal bone marrow (B value) was measured. A B value of ≤0.8 mm was considered to be the major risk factor causing the occurrence of postoperative lower lip paresthesia. There were 461 sides with a B value of ≤0.8 mm. There was a significant difference in the skeletal patterns [Class III (198 sides: 15.7%) > Class I (159 sides: 12.6%) > Class II (104 sides: 8.3%)]. Class II participants had significantly larger B values (2.14 to 3.76 mm) and a lower occurrence rate (≤0.8 mm) than those of Class III participants (1.5 to 3 mm) in front of the mandibular foramen (from 6 mm to 20 mm). Class III participants had significantly shorter buccal bone marrow distance and a higher occurrence rate of B values (≤0.8 mm) than Class II.

Skeletal Stability after Mandibular Setback via Sagittal Split Ramus Osteotomy Verse Intraoral Vertical Ramus Osteotomy: A Systematic Review

Purpose: The purpose of present study was to review the literature regarding the postoperative skeletal stability in the treatment of mandibular prognathism after isolated sagittal split ramus osteotomy (SSRO) or intraoral vertical ramus osteotomy (IVRO). Materials and Methods: The articles were selected from 1980 to 2020 in the English published databases (PubMed, Web of Science and Cochrane Library). The articles meeting the searching strategy were evaluated based on the eligibility criteria, especially at least 30 patients. Results: Based on the eligibility criteria, 9 articles (5 in SSRO and 4 in IVRO) were examined. The amounts of mandibular setback (B point, Pog, and Me) were ranged from 5.53–9.07 mm in SSRO and 6.7–12.4 mm in IVRO, respectively. In 1-year follow-up, SSRO showed the relapse (anterior displacement: 0.2 to 2.26 mm) By contrast, IVRO revealed the posterior drift (posterior displacement: 0.1 to 1.2 mm). In 2-year follow-up, both of SSRO and IVRO presented the relapse with a range from 0.9 to 1.63 mm and 1 to 1.3 mm respectively. Conclusion: In 1-year follow-up, SSRO presented the relapse (anterior displacement) and IVRO posterior drift (posterior displacement). In 2-year follow-up, both of SSRO and IVRO showed the similar relapse distances.

Influence of lingual plate fracture pattern on remodelling site during the healing process of sagittal split ramus osteotomy

The purpose of this study was to investigate whether differences in the pattern of the lingual plate split in sagittal split ramus osteotomy (SSRO) affect the remodelling of the split site. Sixty-one patients with mandibular prognathism (122 sides) underwent SSRO. Computed tomography (CT) was performed at 1 week and 1 year after SSRO. Bone splits were classified according to the lingual split scale (LSS) and the lateral bone cut end (LBCE) by evaluating CT images at 1 week. The remodelling at the split sites was evaluated by superimposing the CT images obtained at 1 week and 1 year. Regarding the LSS pattern, significant differences were observed in the distance between anteroposterior ramus points (P = 0.033) and the ramus area in the axial image (P = 0.011). The LBCE pattern also showed a significant difference in the distance between anteroposterior ramus points (P = 0.043). In conclusion, the differences in the lingual plate split and ramus cut end of the SSRO influence the postoperative remodelling in the anteroposterior region of the split site.

Are we able to predict airway dimensional changes in isolated mandibular setback?

The goal of this study was to determine whether a relationship exists between the amount of mandibular setback and the amount of airway dimensional changes. Records and cone beam computed tomography (CBCT) of patients who had undergone isolated bilateral sagittal split osteotomy setback between January 1, 2013 and March 16, 2020 at a single institution were reviewed retrospectively. The primary outcome variable was upper airway volume dimension change, and the predictor variable was the magnitude of mandibular setback as measured by six different methods. Thirty-one patients were included in the study, with a mean mandibular setback ranging from 1.41 mm to 6.11 mm. None of the predictor variables showed an association with oropharyngeal (P = 0.54) or hypopharyngeal (P = 0.33) volume. Stepwise regression analysis failed to show any significant relationships. Similarly, there was no statistically significant association between any of the predictor variables and oropharyngeal (P = 0.44) or hypopharyngeal (P = 0.74) minimum axial area. The results showed that no correlation exists between the magnitude of mandibular setback and the amount of static airway dimensional changes; therefore, it may not be possible to predict whether obstructive sleep apnea will develop following mild to moderate mandibular setback based upon CBCT measurements.

Does the use of a piezoelectric saw improve neurosensory recovery following sagittal split osteotomy?

Neurosensory disturbance of the inferior alveolar nerve (IAN) is an adverse effect associated with sagittal split osteotomies (SSO). The purpose of this work was to evaluate neurosensory recovery of the IAN when SSOs were performed with piezoelectric (PZ) versus reciprocating (RP) saws. This was a prospective split-mouth study of patients undergoing bilateral SSO using a PZ saw on one side and an RP saw on the other. The primary outcome of interest was neurosensory recovery, as assessed using the functional sensory recovery (FSR) scale defined by the UK Medical Research Council. Descriptive, bivariate, and regression statistics were computed. Twenty patients (40 SSOs) with a mean age of 19.9 ± 3.2 years were included. The mean mandibular movement did not differ significantly (P = 0.50) between the PZ and RP groups. All patients achieved FSR within 1 year of surgery (range 34-249 days). The median time to FSR overall was comparable between the PZ and RP groups (94.5 days and 101.5 days, respectively; P = 0.20). However, at the time FSR was achieved, PZ SSO sites were more likely to have higher neurosensory scores when compared to RP SSO sites (hazard ratio 2.3, 95% confidence interval 1.1-4.9, P = 0.04).

Quantitative sensory testing of mandibular somatosensory function following orthognathic surgery-A pilot study in Chinese with class III malocclusion

BACKGROUND

Somatosensory changes after sagittal split ramus osteotomy (SSRO) have not been fully studied in Chinese patients by the latest technologies.

OBJECTIVE

To provide a comprehensive analysis of somatosensory function at the lower lip and chin at different time points following SSRO in a Chinese population.

METHODS

A total of 22 patients (18-27 years; nine men) with skeletal III malocclusion and scheduled for SSRO were recruited. Quantitative sensory testing (QST) was performed at pre-operation (baseline), 1 week (1W), 1, 3 and 6 months (1M, 3M, 6M) post-operatively. Cold detection threshold (CDT), warm detection threshold (WDT), cold pain threshold (CPT), heat pain threshold (HPT), mechanical detection threshold (MDT), mechanical pain threshold (MPT), pressure pain threshold (PPT) and two-point discrimination threshold (2PD) were tested at the lower lip and chin.

RESULTS

Except for PPT at both test sides at 1W and 1M, all QST values indicated a significantly reduced sensitivity (p < .05). All values had returned to baseline values at 3M with exception of HPT at the right chin which, however, had recovered at 6M (p > .05).

CONCLUSIONS

Somatosensory function at the lower lip and chin appears to be fully recovered in the majority of young Chinese adults 6 months after SSRO for skeletal class III malocclusion.

A Biomechanical Analysis of Muscle Force Changes After Bilateral Sagittal Split Osteotomy

A basic procedure affecting maxillofacial geometry is the bilateral sagittal split osteotomy. During the surgery, the bony segments are placed in a new position that provides the correct occlusion. Changes in the geometry of the mandible will affect the surrounding structures and will have a significant impact on the functioning of the masticatory system. As a result of the displacement of the bone segment, the biomechanical conditions change, i.e., the load and the position of the muscles. The primary aim of this study was to determine the changes in the values of the muscular forces caused by mandible geometry alteration. The study considered the translation and rotation of the distal segment, as well as rotations of the proximal segments in three axes. Calculations were performed for the unilateral, static loading of a model based on rigid body mechanics. Muscles were modeled as spring elements, and a novel approach was used to determine muscle stiffness. In addition, an attempt was made, based on the results obtained for single displacements separately, to determine the changes in muscle forces for geometries with complex displacements. Based on the analysis of the results, it was shown that changes in the geometry of the mandibular bone associated with the bilateral sagittal split osteotomy will have a significant effect on the values of the masticatory muscle forces. Displacement of the distal segment has the greatest effect from -21.69 to 26.11%, while the proximal segment rotations affected muscle force values to a less extent, rarely exceeding 1%. For Yaw and Pitch rotations, the opposite effect of changes within one muscle is noticed. Changes in muscle forces for complex geometry changes can be determined with a high degree of accuracy by the appropriate summation of results obtained for simple cases.

Penetration of inferior alveolar nerve canal increased by bicortical fixation after bilateral sagittal split osteotomy in mandibular prognathism

The purpose of this three-dimensional cone beam computed tomography (CBCT) study was to identify the difference between monocortical fixation (MCF) and bicortical fixation (BCF) in mandibular canal penetration after bilateral sagittal split osteotomy (BSSO) to correct mandibular prognathism, where interosseous fixation was done by BCF or MCF. CBCT was performed 1 week postoperatively and Dolphin 3D software was used to assess direct penetration of the mandibular canal by either type of screw. The primary outcome variable was the presence or absence of mandibular canal penetration and was categorized as a binary coded variable. The BCF and MCF groups were compared by χ² test, and the odds ratio for canal penetration was estimated. Multiple logistic regression was performed to identify factors related to canal penetration. A total of 118 patients were included. The MCF group had only 6% canal penetrations (3/50 patients) and the BCF group had 58.8% canal penetrations (40/68 patients). The regression model showed that BCF was the only factor causing mandibular canal penetration, with an adjusted odds ratio of 52.5. Awareness of the increased risk of canal penetration with BCF and potential nerve injury might influence case selection.

Use of a 'low and short' medial cut limits sagittal ramus osteotomy interferences

The traditional 'high and short' medial cut of the sagittal ramus osteotomy (Hunsuck modification) is a frequent cause of lingual plate interferences in patients undergoing mandibular yaw or cant corrections. We describe how the modified 'low and short' medial cut of the sagittal ramus osteotomy reduces lingual plate interferences with improved passive alignment of the osteotomy segments.

A study of unfavorable splits in the sagittal ramus osteotomy with a short lingual cut

In the bilateral sagittal split osteotomy, a short lingual cut is made on the medial side of the ramus; however, in some cases, a true fracture occurs on the buccal side of the ramus. The purpose of this study was to evaluate the relationship between the splitting pattern of the mandible and the form of the mandible, the surgical technique used, and the postoperative occurrence of relapse after 'unfavorable' splits. The investigation examined 143 patients in whom a short lingual cut was attempted. The rate of unfavorable split was 14.7% (42/286). A strong correlation was observed between the reach of the lateral bone cut to the inferior border of the mandible and an unfavorable split. According to multivariate regression, the factors leading to an insufficient lateral bone cut were the degree of inward curvature of the ramus (P=0.001) and the position of the lateral bone cut (P=0.002). There was no significant difference in relapse between cases of unfavorable and normal splits. An unfavorable split does not affect the prognosis of the occlusion, but it is important to confirm the inward curvature of the ramus and set the position of the lateral bone cut adequately to avoid unfavorable splits.

Evaluation of the Therapeutic Effect of Bi-Maxillary Osteotomy Using the Stress Distribution on the Temporomandibular Joint When Doing Anterior Teeth Occlusion

The purpose of this study was to investigate how sagittal split ramus osteotomy (SSRO) and Le Fort 1 osteotomy affected the stress distribution of the temporomandibular joint (TMJ) during an anterior teeth bite using the three-dimensional (3D) finite element (FE) method. Fourteen orthognathic surgery patients were examined with mandibular prognathism, facial asymmetry, and mandibular retraction. They underwent Le Fort 1 osteotomy in conjunction with SSRO. In addition, ten asymptomatic subjects were recruited as the control group. The 3D models of the mandible, disc, and maxilla were reconstructed according to cone-beam computed tomography (CBCT). Contact was used to simulate the interaction of the disc-condyle, disc-temporal bone, and upper-lower dentition. Muscle forces and boundary conditions corresponding to the anterior occlusions were applied on the models. The stresses on the articular disc and condyle in the pre-operative group were significantly higher than normal. The contact stress and minimum principal stress in TMJ for patients with temporomandibular disorder (TMD) were abnormally higher. The peak stresses of the TMJ of the patients under anterior occlusions decreased after bimaxillary osteotomy. No postoperative TMD symptoms were found. Maxillofacial deformity led to excessive stress on the TMJ. Bimaxillary osteotomy can partially improve the stress distributions of the TMJ and relieve the symptoms of TMD.

Surgical morbidities of sagittal split ramus osteotomy versus intraoral vertical ramus osteotomy for the correction of mandibular prognathism: a randomized clinical trial

The sagittal split ramus osteotomy (SSRO) and intraoral vertical ramus osteotomy (IVRO) are two common orthognathic procedures for the treatment of mandibular prognathism. This randomized clinical trial compared the surgical morbidities between SSRO and IVRO for patients with mandibular prognathism over the first 2 years postoperative. Ninety-eight patients (40 male, 58 female) with a mean age of 24.4±3.5 years underwent bilateral SSRO (98 sides) or IVRO (98 sides) as part or all of their orthognathic surgery. IVRO presented less short-term and long-term surgical morbidity in general. The SSRO group had a greater incidence of inferior alveolar nerve deficit at all follow-up time points (P< 0.01). There was more TMJ pain at 6 weeks (P= 0.047) and 3 months (P= 0.001) postoperative in the SSRO group. The SSRO group also presented more minor complications, which were related to titanium plate exposure and infection. There were no major complications for either technique in this study. Despite the need for intermaxillary fixation, IVRO appears to be associated with less surgical morbidity than SSRO when performed as a mandibular setback procedure to treat mandibular prognathism.

Antibiotic prophylaxis for sagittal split ramus osteotomy using resorbable plate and screw fixation: a randomised trial to compare extended dual-agent and inpatient single-agent regimens

Resorbable materials are used to fix bony fragments after sagittal split ramus osteotomy (SSRO), but to our knowledge, there is no clear regimen for antibiotic prophylaxis when such materials are used. The purpose of this study therefore was to compare inpatient single-agent and extended dual-agent antibiotic prophylaxis for the prevention of surgical site infections (SSI) in patients after SSRO. This prospective study included 100 patients who underwent SSRO for deformities of the jaw. Cephalometric analysis was performed preoperatively, and at one month and one year postoperatively. Patients were divided into two groups of 50 each. Group A was given cefazolin sodium 1g preoperatively and every eight hours for 48 hours postoperatively. Group B was given cefazolin sodium 1g preoperatively and every eight hours for 48 hours postoperatively, after which they were provided with oral amoxicillin for three days. Both groups were assessed for SSIs for one year postoperatively using the Clavien-Dindo classification. SSIs were documented in seven patients in Group A and six in Group B, with no significant difference between the groups. The two regimens had no significant association with SSI. In conclusion, our results suggest that the inpatient, single-agent, postoperative antibiotic regimen is sufficient to prevent SSI in patients who have SSRO with resorbable plate and screw fixation.

Comparison of strengths of five internal fixation methods used after bilateral sagittal split ramus osteotomy: An in vitro study

BACKGROUND

Results on the strength and displacement of internal fixation methods for bilateral sagittal split ramus osteotomy are controversial, and some designs have not been adequately studied. Therefore, this study was conducted to compare techniques using bicortical or monocortical screws.

MATERIALS AND METHODS

In this in vitro study, 35 sheep hemi-mandibles were randomly assigned to five groups of seven each: fixation using (1) a 13 × 2 screw, (2) two 13 × 2 screws (arranged vertically), (3) three 13 × 2 screws, (4) 1 plate with 4 holes and four monocortical screws, and (5) a Y-shaped plate and five monocortical screws. Specimens underwent vertical forces until failure. Breakage forces and displacements of groups were recorded and compared statistically. Using one-way analysis of variance (ANOVA) with a Tukey's post hoc test and Kruskal-Wallis test. Level of significance was predetermined as 0.05.

RESULTS

Strengths of Groups 1-5 were, respectively, 14.43 ± 4.35, 28.00 ± 8.89, 28.29 ± 8.01, 29.43 ± 8.24, and 61.29 ± 12.38 N, respectively (P = 0.000, analysis of variance). The corresponding displacement extents were 7.98 ± 0.04, 7.85 ± 0.26, 8.00 ± 0.00, 7.35 ± 1.73, and 6.79 ± 2.03 mm (P = 0.298, Kruskal-Wallis test).

CONCLUSION

Use of a single bicortical screw is the weakest method, while Y-shaped plates might provide the highest strength. Using two or three bicortical screws or 4-hole plates might deliver similar strengths.

The Biomechanical Effect of the Sagittal Split Ramus Osteotomy on the Temporomandibular Joint: Current Perspectives on the Remodeling Spectrum

The sagittal split ramus osteotomy is a key approach for treating dentofacial deformities. Although it delivers excellent results, the sagittal split ramus osteotomy is believed to induce stress to the temporomandibular joint. Potential stress inducers could be classified as intra- and postoperative factors resulting in an inflammatory response and molecular cascades, which initiate physiological remodeling. Occasionally, this process exceeds its capacity and causes pathological remodeling, through either degenerative joint disease or condylar resorption. Hard evidence on how orthognathic surgery causes inflammation and how this inflammation is linked to the spectrum of remodeling remains scarce. Current concepts on this matter are mainly based on clinical observations and molecular mechanisms are extrapolated from fundamental research in other body parts or joints. This perspective study provides an overview of current knowledge on molecular pathways and biomechanical effects in temporomandibular joint remodeling. It provides research directions that could lead to acquiring fundamental evidence of the relation of orthognathic surgery and inflammation and its role in remodeling. Performing osteotomies in animal models and identifying inflammatory mediators as well as their effect on the joint seem promising. Patients affected by pathological remodeling can also provide samples for histological as well as molecular analysis. Individual susceptibility analysis by linking certain suspect phenotypes to genetic variation could identify the cause and molecular pathway responsible for degenerative joint disease and condylar resorption, ultimately leading to clinically applicable treatment and prevention strategies.

Effect of sagittal split ramus osteotomy on morphologic parameters of temporomandibular joint in patients with mandibular prognathism

The purpose of this study was to evaluate the change in three-dimensional morphology and clinical symptoms of temporomandibular joint (TMJ) in class III dentofacial deformity patients postoperatively for 6 months after sagittal split ramus osteotomy (SSRO).Seventeen patients with skeletal Class III malocclusion and 10 asymptomatic volunteers (classified as Control group) were recruited for the study and underwent cone-beam computed tomography scanning. The geometries of the maxilla and mandible were reconstructed using MIMICS (Materialise, Leuven, Belgium). The morphologic measurements of the patients' TMJs were done before surgery and at 6-month follow-up - named as Pre and Post groups, respectively.The joint spaces (medial joint space, superior joint space, lateral joint space, anterior joint space, and posterior joint space) of the Control group were significantly greater than those of the Pre and Post groups (P < .05), and SSRO did not significantly change the TMJ morphology parameters. Five patients were found to have preoperative temporomandibular disorder (TMD) symptoms, and 3 of them were relieved at 6 months after surgery. Postoperative TMD symptom was observed in 1 patient without preoperative TMD symptom.SSRO did not markedly alter the TMJ morphology of the patients with mandibular prognathism. The effects of SSRO on TMD symptoms should be related to the type of deformity.

Fixation methods in sagittal split ramus osteotomy: a systematic review on in vitro biomechanical assessments

The aim of this systematic review was to assess the stability of rigid internal fixation (RIF) techniques in sagittal split ramus osteotomy (SSRO) based on in vitro biomechanical assessments, with particular interest in large mandibular advancements. In general, RIF methods can be divided into three groups: bicortical screws, miniplates, and a combination of the two. An electronic search of the PubMed, CINAHL, and Embase databases was performed, and studies published between January 2003 and March 2018 were screened for inclusion. Comparative studies with an in vitro experimental design, using biomechanical assessments to measure the stability of RIF methods in SSRO, were included. Of 104 unique studies identified in the initial search, 24 were included. Twenty-two of these 24 studies analyzed an advancement of the mandible of 7mm or less. The use of a single four-hole or six-hole miniplate was less stable than the use of bicortical screws, hybrid techniques, double miniplates, or grid plates. Two studies analyzed advancements of 10mm, for which two miniplates placed in parallel and a grid plate showed most stability. Although there was agreement between studies with regard to results, more biomechanical studies are required to quantify the stability of fixation methods in larger mandibular advancements.

Comparison of osseous healing after sagittal split ramus osteotomy and intraoral vertical ramus osteotomy

The sagittal split ramus osteotomy (SSRO) is generally associated with greater postoperative stability than the intraoral vertical ramus osteotomy (IVRO); however, it entails a risk of inferior alveolar nerve damage. In contrast, IVRO has the disadvantages of slow postoperative osseous healing and projection of the antegonial notch, but inferior alveolar nerve damage is believed to be less likely. The purposes of this study were to compare the osseous healing processes associated with SSRO and IVRO and to investigate changes in mandibular width after IVRO in 29 patients undergoing mandibular setback. On computed tomography images, osseous healing was similar in patients undergoing SSRO and IVRO at 1year after surgery. Projection of the antegonial notch occurred after IVRO, but returned to the preoperative state within 1year. The results of the study indicate that IVRO is equivalent to SSRO with regard to both bone healing and morphological recovery of the mandible.

Concepts, protocol, variations and current trends in surgery first orthognathic approach: a literature review

In the current era of expedited orthodontics, among many clinicians, tertiary care hospitals and patients, surgery first orthognathic approach (SFOA) has gained popularity. The advantages of SFOA (face first approach) are the reduced overall treatment duration and the early improvement in facial esthetics. In SFOA, the absence of a presurgical phase allows surgery to be performed first, followed by comprehensive orthodontic treatment to achieve the desired occlusion. The basic concepts of surgery early, surgery last, SFOA and Sendai SFOA technique along with its variations are reviewed in the present article. The recent advancement in SFOA in the context of preoperative preparation, surgical procedures and post-surgical orthodontics with pertinent literature survey are also discussed.

The Usefulness of Piezoelectric Surgery in Sagittal Split Ramus Osteotomy

Mandibular osteotomy carries with it a risk of damaging blood vessels and nerves when using traditional surgical techniques. Piezosurgery^®, is a new technique that uses ultrasonic vibration to enable bone-selective sectioning without damage to the surrounding soft tissues. However, paralysis may not be completely eliminated using Piezosurgery^® for osteotomy. We investigated how piezoelectric surgery in bilateral sagittal splitting ramus osteotomy (BSSRO) affected the surrounding soft tissue. Forty-four patients with skeletal mandibular prognathism underwent mandibular setback with BSSRO. Patients were divided into two groups, those treated by the conventional chisel technique and those treated by Piezosurgery^®. Osteotomy time, blood loss, and incidence of paresthesia were compared retrospectively. Osteotomy time and blood loss in the piezo group were significantly reduced compared to the chisel group. Interestingly, whereas paresthesia incidence immediately after the operation did not differ between the groups, paresthesia in the piezo group 3 months postoperatively was significantly less than in the chisel group. However, a few cases of paralysis did not recover even in the piezo group. Blood loss and osteotomy time did not correlate with the paralysis. This study demonstrates that while piezoelectric surgery does impact the nerve tissue, the use of piezoelectric surgery in BSSRO leads to significantly less long term paralysis compared to surgery done by chisel.

Sequencing of bimaxillary surgery in the correction of vertical maxillary excess: retrospective study

The aim of this study was to evaluate the precision of bimaxillary surgery performed to correct vertical maxillary excess, when the procedure is sequenced with mandibular surgery first or maxillary surgery first. Thirty-two patients, divided into two groups, were included in this retrospective study. Group 1 comprised patients who received bimaxillary surgery following the classical sequence with repositioning of the maxilla first. Patients in group 2 received bimaxillary surgery, but the mandible was operated on first. The precision of the maxillomandibular repositioning was determined by comparison of the digital prediction and postoperative tracings superimposed on the cranial base. The data were tabulated and analyzed statistically. In this sample, both surgical sequences provided adequate clinical accuracy. The classical sequence, repositioning the maxilla first, resulted in greater accuracy for A-point and the upper incisor edge vertical position. Repositioning the mandible first allowed greater precision in the vertical position of pogonion. In conclusion, although both surgical sequences may be used, repositioning the mandible first will result in greater imprecision in relation to the predictive tracing than repositioning the maxilla first. The classical sequence resulted in greater accuracy in the vertical position of the maxilla, which is key for aesthetics.

Biomechanical Loading Evaluation of Unsintered Hydroxyapatite/poly-l-lactide Plate System in Bilateral Sagittal Split Ramus Osteotomy

OSTEOTRANS MX^® (Takiron Co., Ltd., Osaka, Japan) is a bioactive resorbable maxillofacial osteosynthetic material composed of an unsintered hydroxyapatite/poly-l-lactide composite, and its effective osteoconductive capacity has been previously documented. However, the mechanical strength of this plate system is unclear. Thus, the aim of this in vitro study was to assess its tensile and shear strength and evaluate the biomechanical intensity of different osteosynthesis plate designs after sagittal split ramus osteotomy by simulating masticatory forces in a clinical setting. For tensile and shear strength analyses, three mechanical strength measurement samples were prepared by fixing unsintered hydroxyapatite/poly-l-lactide composed plates to polycarbonate skeletal models. Regarding biomechanical loading evaluation, 12 mandibular replicas were used and divided into four groups for sagittal split ramus osteotomy fixation. Each sample was secured in a jig and subjected to vertical load on the first molar teeth. Regarding shear strength, the novel-shaped unsintered hydroxyapatite/poly-l-lactide plate had significantly high intensity. Upon biomechanical loading evaluation, this plate system also displayed significantly high stability in addition to bioactivity, with no observed plate fracture. Thus, we have clearly demonstrated the efficacy of this plate system using an in vitro model of bilateral sagittal split ramus osteotomy of the mandible.

Tongue-palatal contact changes in patients with skeletal mandibular prognathism after sagittal split ramus osteotomy: an electropalatography study

The purpose of this study was to investigate the changes in tongue-palatal contact patterns using electropalatography (EPG) before and after sagittal split ramus osteotomy (SSRO) in patients with mandibular prognathism. Nine clients who underwent SSRO for mandibular setback and seven control subjects were participated in this study. Tongue-palatal contact patterns for /t/, /s/ and /k/ production were investigated using EPG before surgery and 3 months after surgery. The mean value of whole total of palate contact (WT) in the maximum contact frame was examined before and after SSRO. The correlation quantity between the change of center of gravity (COG) value and the amount of mandibular setback was also evaluated. The mean value of WT for /t/ and /s/ significantly increased after SSRO, and the EPG pattern became normal. However, a remarkable change in WT for /k/ was not observed, and the mean value was significantly larger in the SSRO group before and after surgery than in the control group. A negative correlation between COG variation and the amount of mandibular setback for /t/ and positive correlation for /s/ was observed. This study demonstrated that tongue-palatal contact patterns for /t/ and /s/ articulation improved clearly after SSRO. There was a significant correlation between COG variation and the amount of mandibular setback. However, no significant change was detected through perceptual assessment before and after SSRO. Further investigation is needed to determine whether these results will change over time.

Skeletal stability after sagittal split ramus osteotomy with physiological positioning in patients with skeletal mandibular prognathism and facial asymmetry

The correction of deformities of the jaw in patients with facial asymmetry is challenging because of the high rate of relapse, which may partly be caused by skeletal interference and inappropriate seating of the condylar head. We evaluated outcomes in 30 patients who were treated by short lingual osteotomy with physiological positioning. Nine had facial symmetry (absolute displacement of the menton<2mm), 14 had minor asymmetry (displacement of >2 to <4mm), and 7 severe asymmetry (displacement of >4mm). The postoperative position of the menton (Me) was stable in each group, but deviated by 3.56mm in those with severe asymmetry. This deviation remained immediately after operation and after more than one year in this group, which implies that the Me was not on the mandibular midline. The lateral swing of both sides of the proximal segment did not change immediately after operation in any group. Although short lingual osteotomy with physiological positioning can result in skeletal stability, it is important to assess the association between the dental arch and the mandible using computed tomography to ensure a good outcome in patients with a skeletal class III deformity and facial asymmetry.

Skeletal Stability after Large Mandibular Advancement (> 10 mm) with Bilateral Sagittal Split Osteotomy and Skeletal Elastic Intermaxillary Fixation

OBJECTIVES

The aim of the present study was to assess the skeletal stability after large mandibular advancement (> 10 mm) with bilateral sagittal split osteotomy and skeletal elastic intermaxillary fixation and to correlate the skeletal stability with the vertical facial type.

MATERIAL AND METHODS

A total of 33 consecutive patients underwent bimaxillary surgery to correct skeletal Class II malocclusion with a mandibular advancement (> 10 mm) measured at B-point and postoperative skeletal elastic intermaxillary fixation for 16 weeks. Skeletal stability was evaluated using lateral cephalometric radiographs obtained preoperative (T1), 8 weeks postoperatively (T2), and 18 month postoperatively (T3). B-point and pogonion (Pog) was used to measure the skeletal relapse and the mandibular plane angle (MP-angle) was used to determine the vertical facial type.

RESULTS

The mean advancement from T1 to T2 were 11.6 mm and 13.5 mm at B-point and Pog, respectively. The mean skeletal relapse from T2 to T3 was -1.3 mm at B-point and -1.6 mm at Pog. The nineteen patients characterized as long facial types, showed the highest amount of skeletal relapse (-1.5 mm at B-point and -1.9 mm at Pog).

CONCLUSIONS

The present study showed a limited amount of skeletal relapse in large mandibular advancement (> 10 mm) with bilateral sagittal split osteotomy and skeletal elastic intermaxillary fixation. Bilateral sagittal split osteotomy in combination with skeletal intermaxillary fixation can therefore be an alternative to distraction osteogenesis in large mandibular advancements.

Anatomical position of the mandibular canal in relation to the buccal cortical bone in Chinese patients with different dentofacial relationships

BACKGROUND/PURPOSE

The purpose of this study was to determine the position of the mandibular canal in relation to the buccal cortical bone in Chinese patients with three dentofacial relationships: normal dentition, retrognathism, and prognathism.

METHODS

Cone-beam computed tomography and lateral cephalograms of patients with normal dentation, retrognathism, and prognathism (n = 32 each group) were reviewed. Measurements of the shortest distance from the outer/buccal edge of the mandibular canal to the inner surface of the buccal cortex, and the distance from the lingula of the ramus to the dorsal root of the first molar were recorded.

RESULTS

No significant difference was observed between the three groups in the distribution of contact or fusion of the mandibular canal, or in the course of the mandibular canal on the right or left side. When the shortest distance at the lingula on the left side was >2.1 mm, no instances of contact or fusion were observed. On the right side, 100% of the patients had no contact or fusion when the shortest distance was >2.7 mm at the lingula.

CONCLUSION

The shortest distance from the outer/buccal edge of the mandibular canal to the inner surface of the buccal cortex measured at the lingula can predict contact or fusion. During sagittal split ramus osteotomy, great care should be observed at the point halfway between the lingula and the anterior ramus border where the inferior alveolar nerve is the closest to the cortical bone.

Analysis of Mandibular Test Specimens Used to Assess a Bone Fixation System

The aim of this study was to assess through biomechanical testing if different synthetic materials used to fabricate test specimens have a different biomechanical behavior in comparison with other materials when simulating in vitro load resistance of a fixation method established for sagittal split ramus osteotomy (SSRO). Thirty synthetic and standardized human hemimandible replicas with SSRO were divided into three groups of 10 samples each. Group A-ABS plastic; Group B-polyamide; and Group C-polyurethane. These were fixated with three bicortical position screws (16 mm in length, 2.0-mm system) in an inverted l pattern using perforation guide and 5-mm advancement. Each sample was submitted to linear vertical load, and load strength values were recorded at 1, 3, 5, 7, and 10 mm of displacement. The means and standard deviation were compared using the analysis of variance (p < 0.05) and the Tukey test. A tendency for lower values was observed in Group B in comparison with Groups A and C. At 3 and 5 mm of displacement, a difference between Groups A and C was found in comparison with Group B (p < 0.05). At 7 and 10 mm of displacement, a difference was found among the three groups, in which Group C showed the highest values and Group B the lowest (p < 0.05). Taking into consideration the results obtained and the behavior of each material used as a substrate, significant differences occurred among the materials when compared among them.

Changes in difficult airway predictors following mandibular setback surgery

The aim of this study was to determine the effect of surgical mandibular backward movements on the predictors of a difficult airway. Thirty-seven skeletal class III patients were included in this study. The Mallampati score, body mass index (BMI), maximal inter-incisal distance, and thyromental and sternomental distances of these patients were evaluated preoperatively and at 6 months and 2 years postoperatively. A sagittal split ramus osteotomy (SSRO) without genioplasty was performed in all patients by the same surgical team, and anaesthesia was provided by the same anaesthesiologist using nasotracheal intubation. The paired samples t-test and Wilcoxon signed-rank test were used for statistical comparisons of the data. There were no statistically significant changes in BMI or sternomental and thyromental distances after SSRO. The maximal inter-incisal distance was significantly reduced at 6 months postoperatively (P<0.05), but no statistical difference was found between the values obtained preoperatively and at 2 years postoperative. A statistically significant increase in Mallampati score was observed postoperatively (P<0.05). Both the patient and practitioner should be aware of the risks associated with an increased postoperative Mallampati score in mandibular setback patients. The amount of mandibular setback in skeletal class III patients with a high preoperative Mallampati score should be limited to prevent potential postoperative airway problems.

In vitro biomechanical comparison of six different fixation methods following 5-mm sagittal split advancement osteotomies

The sagittal split ramus osteotomy (SSRO) is a surgical technique used widely to treat many congenital and acquired mandibular discrepancies. Stabilization of the osteotomy site and the potential for skeletal relapse after the procedure are still major problems. The aim of this study was to compare the mechanical stability of six methods of rigid fixation in SSRO using a biomechanical test model. Sixty polyurethane replicas of human hemimandibles were divided into six groups. In group I, the osteotomies were fixed with two four-hole titanium miniplates; in group II, with one four-hole miniplate; in group III, with one four-hole miniplate+a bicortical screw; in group IV, with a grid miniplate; in group V, with a four-hole locking miniplate; and in group VI, with a six-hole miniplate. A linear load in the premolar region was applied to the hemimandibles. The resistance forces (N) needed to displace the distal segment by 1, 3, and 5mm were recorded and the data transmitted from the load cell to a computer. One-way analysis of variance with Tukey's post hoc test was performed to compare the means between groups. For the three displacement conditions, there was a strong tendency for the 2.0-mm plate+screw and the grid plate to have higher values.

Assessment of sagittal split ramus osteotomy rigid internal fixation techniques using a finite element method

In this study, finite element analysis (FEA) was used to evaluate nine rigid internal fixation techniques for sagittal split ramus osteotomy. To achieve this, a computed tomography (CT) scan of a healthy patient was obtained and used to generate the geometry of a half-mandible. The geometries of bicortical screws, miniplates, and monocortical screws were designed and combined with the mandible in nine models simulating various techniques. Four models used bicortical screws in various arrangements and four used miniplates of various designs. One model represented a hybrid technique. A load of 500 N was applied to the posterior teeth and FEA was applied. The most stable techniques were the hybrid technique and a single straight miniplate, presenting the least displacement among all models. Bicortical screws, while presenting reasonable stability, showed high strain areas near the anterior ramus ridge, superoposterior to the screws, implying a risk of bone fracture in this area. On the other hand, the T-shaped and double Y-shaped miniplates were associated with high von Mises stresses that would impair their rigidity, especially where angles appeared in their designs. We recommend the use of a single straight miniplate because it provides sufficient stable fixation with minimal risks or disadvantages.

Retrospective study of changes in the sensitivity of the oral mucosa: sagittal split ramus osteotomy (SSRO) versus intraoral vertical ramus osteotomy (IVRO)

We investigated changes in the sensitivity of cutaneous points and the oral mucosa after sagittal split ramus osteotomy (SSRO) and assessed the differences between SSRO and intraoral vertical ramus osteotomy (IVRO). The subjects included in this study were 46 patients with mandibular prognathism who underwent IVRO (88 rami) and 30 patients who underwent SSRO (59 rami). An objective evaluation of the neurosensory status of each patient was completed preoperatively and at 1, 4, 8, 12, and 24 weeks postoperatively. Other variables studied for each patient included sex, age, magnitude of mandibular setback, and amount of blood loss during surgery. We found that a neurosensory recovery occurred earlier in the oral mucosa than at cutaneous points. The number of oral mucosa points showing reduced neurosensory function and neurosensory disturbance after SSRO was significantly higher than after IVRO at 1, 4, and 8 weeks (P<0.05). The nerve recovery observed after SSRO was delayed for a longer period than that noted in our previous study of IVRO. In conclusion, we found changes in sensitivity at cutaneous points and the oral mucosa after SSRO and assessed the differences between SSRO and IVRO.

Systematic review of preoperative mandibular canal position as it relates to postoperative neurosensory disturbance following the sagittal split ramus osteotomy

The purpose of this study was to review the current literature for the relationship between the preoperative position of the mandibular canal on three-dimensional (3D) radiographic imaging and postoperative neurosensory disturbance (NSD) following a sagittal split ramus osteotomy (SSRO). A literature search was conducted using PubMed, EMBASE, and the Cochrane Database for articles published from 1 January 2000 through 31 December 2013. Studies that included preoperative 3D imaging and assessment of NSD after surgery were reviewed. Study sample characteristics and results were extracted. Of the 69 articles identified, seven met the inclusion and exclusion criteria. There was no standardization for measuring the canal position or for evaluating NSD. General consensus was that the less space between the mandibular canal and the outer border of the buccal cortex the more frequent the occurrence of NSD. Increased bone density also appeared to contribute to a higher incidence of NSD. Utilization of 3D images to locate and measure the position of the mandibular canal is not standardized. Advances in 3D imaging and evaluation tools allow for new methodologies to be developed. Early attempts are informative, but additional studies are needed to verify the relationship between the location of the nerve and NSD following surgery.

Comparative Study of Skeletal Stability between Postoperative Skeletal Intermaxillary Fixation and No Skeletal Fixation after Bilateral Sagittal Split Ramus Osteotomy: an 18 Months Retrospective Study

Objectives

The purpose of the present study was to evaluate skeletal stability after mandibular advancement with bilateral sagittal split osteotomy.

Material and Methods

Twenty-six patients underwent single-jaw bilateral sagittal split osteotomy (BSSO) to correct skeletal Class II malocclusion. One group (n = 13) were treated postoperatively with skeletal elastic intermaxillary fixation (IMF) while the other group (n = 13) where threated without skeletal elastic IMF.

Results

The mean advancement at B-point and Pog in the skeletal elastic IMF group was 6.44 mm and 7.22 mm, respectively. Relapse at follow-up at B-point was -0.74 mm and -0.29 mm at Pog. The mean advancement at B-point and Pog in the no skeletal elastic IMF group was 6.30 mm and 6.45 mm, respectively. Relapse at follow-up at B-point was -0.97 mm and -0.86 mm at Pog. There was no statistical significant (P > 0.05) difference between the skeletal IMF group and the no skeletal group regarding advancement nor relapse at B-point or Pog.

Conclusions

Bilateral sagittal split osteotomy is characterized as a stable treatment to correct Class II malocclusion. This study demonstrated no difference of relapse between the skeletal intermaxillary fixation group and the no skeletal intermaxillary fixation group. Because of selection-bias and the reduced number of patients it still remains inconclusive whether to recommend skeletal intermaxillary fixation or not in the prevention of relapse after mandibular advancement.