Wrinkles in Polytetrafluoroethylene on Polystyrene: Persistence Lengths and the Effect of Nanoinclusions

We characterize wrinkling on the surfaces of prestrained polystyrene sheets coated with thin polytetrafluoroethylene skins using a combination of mechanical strain measurements and 3D finite element simulations. The simulations show that wrinkle wavelength increases with skin thickness, in agreement with a well-known continuum model and recent experiments. The wrinkle amplitudes also increase with strain. Nanoinclusions, such as holes and patterned lines, influence wrinkle patterns over limited distances, and these distances are shown to scale with the wrinkle wavelengths. Good agreement between experimental and simulated influence distances is observed. The inclusions provide strain relief, and they behave as if they are attracting adjacent material when the sheets are under strain. The wrinkles have stiffnesses in much the same way as do polymers (but at different length scales), a property that is quantified for polymers using persistence lengths. We show that the concept of persistence length can be useful in characterizing the wrinkle properties that we have observed. However, the calculated persistence lengths do not vary systematically with thickness and strain, as interactions between neighboring wrinkles produce confinement that is analogous to the kinetic confinement of polymers.

Strain Relaxation in CVD Graphene: Wrinkling with Shear Lag

We measure uniaxial strain fields in the vicinity of edges and wrinkles in graphene prepared by chemical vapor deposition (CVD), by combining microscopy techniques and local vibrational characterization. These strain fields have magnitudes of several tenths of a percent and extend across micrometer distances. The nonlinear shear-lag model remarkably captures these strain fields in terms of the graphene-substrate interaction and provides a complete understanding of strain-relieving wrinkles in graphene for any level of graphene-substrate coherency.

A highly compliant serpentine shaped polyimide interconnect for front-end strain relief in chronic neural implants

While the signal quality of recording neural electrodes is observed to degrade over time, the degradation mechanisms are complex and less easily observable. Recording microelectrodes failures are attributed to different biological factors such as tissue encapsulation, immune response, and disruption of blood-brain barrier (BBB) and non-biological factors such as strain due to micromotion, insulation delamination, corrosion, and surface roughness on the recording site (1–4). Strain due to brain micromotion is considered to be one of the important abiotic factors contributing to the failure of the neural implants. To reduce the forces exerted by the electrode on the brain, a high compliance 2D serpentine shaped electrode cable was designed, simulated, and measured using polyimide as the substrate material. Serpentine electrode cables were fabricated using MEMS microfabrication techniques, and the prototypes were subjected to load tests to experimentally measure the compliance. The compliance of the serpentine cable was numerically modeled and quantitatively measured to be up to 10 times higher than the compliance of a straight cable of same dimensions and material.