Variability and Standardization of Quantitative Imaging: Monoparametric to Multiparametric Quantification, Radiomics, and Artificial Intelligence

Radiological images have been assessed qualitatively in most clinical settings by the expert eyes of radiologists and other clinicians. On the other hand, quantification of radiological images has the potential to detect early disease that may be difficult to detect with human eyes, complement or replace biopsy, and provide clear differentiation of disease stage. Further, objective assessment by quantification is a prerequisite of personalized/precision medicine. This review article aims to summarize and discuss how the variability of quantitative values derived from radiological images are induced by a number of factors and how these variabilities are mitigated and standardization of the quantitative values are achieved. We discuss the variabilities of specific biomarkers derived from magnetic resonance imaging and computed tomography, and focus on diffusion-weighted imaging, relaxometry, lung density evaluation, and computer-aided computed tomography volumetry. We also review the sources of variability and current efforts of standardization of the rapidly evolving techniques, which include radiomics and artificial intelligence.

A Deep Learning System for Synthetic Knee Magnetic Resonance Imaging: Is Artificial Intelligence-Based Fat-Suppressed Imaging Feasible?

MATERIALS AND METHODS

This single-center study was approved by the institutional review board. Artificial intelligence-based FS MRI scans were created from non-FS images using a deep learning system with a modified convolutional neural network-based U-Net that used a training set of 25,920 images and validation set of 16,416 images. Three musculoskeletal radiologists reviewed 88 knee MR studies in 2 sessions, the original (proton density [PD] + FSPD) and the synthetic (PD + AFSMRI). Readers recorded AFSMRI quality (diagnostic/nondiagnostic) and the presence or absence of meniscal, ligament, and tendon tears; cartilage defects; and bone marrow abnormalities. Contrast-to-noise rate measurements were made among subcutaneous fat, fluid, bone marrow, cartilage, and muscle. The original MRI sequences were used as the reference standard to determine the diagnostic performance of AFSMRI (combined with the original PD sequence). This is a fully balanced study design, where all readers read all images the same number of times, which allowed the determination of the interchangeability of the original and synthetic protocols. Descriptive statistics, intermethod agreement, interobserver concordance, and interchangeability tests were applied. A P value less than 0.01 was considered statistically significant for the likelihood ratio testing, and P value less than 0.05 for all other statistical analyses.

RESULTS

Artificial intelligence-based FS MRI quality was rated as diagnostic (98.9% [87/88] to 100% [88/88], all readers). Diagnostic performance (sensitivity/specificity) of the synthetic protocol was high, for tears of the menisci (91% [71/78], 86% [84/98]), cruciate ligaments (92% [12/13], 98% [160/163]), collateral ligaments (80% [16/20], 100% [156/156]), and tendons (90% [9/10], 100% [166/166]). For cartilage defects and bone marrow abnormalities, the synthetic protocol offered an overall sensitivity/specificity of 77% (170/221)/93% (287/307) and 76% (95/125)/90% (443/491), respectively. Intermethod agreement ranged from moderate to substantial for almost all evaluated structures (menisci, cruciate ligaments, collateral ligaments, and bone marrow abnormalities). No significant difference was observed between methods for all structural abnormalities by all readers (P > 0.05), except for cartilage assessment. Interobserver agreement ranged from moderate to substantial for almost all evaluated structures. Original and synthetic protocols were interchangeable for the diagnosis of all evaluated structures. There was no significant difference for the common exact match proportions for all combinations (P > 0.01). The conspicuity of all tissues assessed through contrast-to-noise rate was higher on AFSMRI than on original FSPD images (P < 0.05).

CONCLUSIONS

Artificial intelligence-based FS MRI (3D AFSMRI) is feasible and offers a method for fast imaging, with similar detection rates for structural abnormalities of the knee, compared with original 3D MR sequences.

Accelerated Isotropic Multiparametric Imaging by High Spatial Resolution 3D-QALAS With Compressed Sensing: A Phantom, Volunteer, and Patient Study

OBJECTIVES

The aims of this study were to develop an accelerated multiparametric magnetic resonance imaging method based on 3D-quantification using an interleaved Look-Locker acquisition sequence with a T2 preparation pulse (3D-QALAS) combined with compressed sensing (CS) and to evaluate the effect of CS on the quantitative mapping, tissue segmentation, and quality of synthetic images.

MATERIALS AND METHODS

A magnetic resonance imaging system phantom, containing multiple compartments with standardized T1, T2, and proton density (PD) values; 10 healthy volunteers; and 12 patients with multiple sclerosis were scanned using the 3D-QALAS sequence with and without CS and conventional contrast-weighted imaging. The scan times of 3D-QALAS with and without CS were 5:56 and 11:11, respectively. For healthy volunteers, brain volumetry and myelin estimation were performed based on the measured T1, T2, and PD. For patients with multiple sclerosis, the mean T1, T2, PD, and the amount of myelin in plaques and contralateral normal-appearing white matter (NAWM) were measured. Simple linear regression analysis and Bland-Altman analysis were performed for each metric obtained from the datasets with and without CS. To compare overall image quality and structural delineations on synthetic and conventional contrast-weighted images, case-control randomized reading sessions were performed by 2 neuroradiologists in a blinded manner.

RESULTS

The linearity of both phantom and volunteer measurements in T1, T2, and PD values obtained with and without CS was very strong (R2 = 0.9901-1.000). The tissue segmentation obtained with and without CS also had high linearity (R2 = 0.987-0.999). The quantitative tissue values of the plaques and NAWM obtained with CS showed high linearity with those without CS (R2 = 0.967-1.000). There were no significant differences in overall image quality between synthetic contrast-weighted images obtained with and without CS (P = 0.17-0.99).

CONCLUSIONS

Multiparametric imaging of the whole brain based on 3D-QALAS can be accelerated using CS while preserving tissue quantitative values, tissue segmentation, and quality of synthetic images.

Principal component analysis fosr fast and model-free denoising of multi b-value diffusion-weighted MR images

Despite the utility of tumour characterisation using quantitative parameter maps from multi-b-value diffusion-weighted MRI (DWI), clinicians often prefer the use of the image with highest diffusion-weighting (b-value), for instance for defining regions of interest (ROIs). However, these images are typically degraded by noise, as they do not utilize the information from the full acquisition. We present a principal component analysis (PCA) approach for model-free denoising of DWI data. PCA-denoising was compared to synthetic MRI, where a diffusion model is fitted for each voxel and a denoised image at a given b-value is generated from the model fit. A quantitative comparison of systematic and random errors was performed on data simulated using several diffusion models (mono-exponential, bi-exponential, stretched-exponential and kurtosis). A qualitative visual comparison was also performed for in vivo images in six healthy volunteers and three pancreatic cancer patients. In simulations, the reduction in random errors from PCA-denoising was substantial (up to 55%) and similar to synthetic MRI (up to 53%). Model-based synthetic MRI denoising resulted in substantial (up to 29% of signal) systematic errors, whereas PCA-denoising was able to denoise without introducing systematic errors (less than 2%). In vivo, the signal-to-noise ratio (SNR) and sharpness of PCA-denoised images were superior to synthetic MRI, resulting in clearer tumour boundaries. In the presence of motion, PCA-denoising did not cause image blurring, unlike image averaging or synthetic MRI. Multi-b-value MRI can be denoised model-free with our PCA-denoising strategy that reduces noise to a level similar to synthetic MRI, but without introducing systematic errors associated with the synthetic MRI method.

Multiparametric MRI: From Simultaneous Rapid Acquisition Methods and Analysis Techniques Using Scoring, Machine Learning, Radiomics, and Deep Learning to the Generation of Novel Metrics

ABSTRACT

With the recent advancements in rapid imaging methods, higher numbers of contrasts and quantitative parameters can be acquired in less and less time. Some acquisition models simultaneously obtain multiparametric images and quantitative maps to reduce scan times and avoid potential issues associated with the registration of different images. Multiparametric magnetic resonance imaging (MRI) has the potential to provide complementary information on a target lesion and thus overcome the limitations of individual techniques. In this review, we introduce methods to acquire multiparametric MRI data in a clinically feasible scan time with a particular focus on simultaneous acquisition techniques, and we discuss how multiparametric MRI data can be analyzed as a whole rather than each parameter separately. Such data analysis approaches include clinical scoring systems, machine learning, radiomics, and deep learning. Other techniques combine multiple images to create new quantitative maps associated with meaningful aspects of human biology. They include the magnetic resonance g-ratio, the inner to the outer diameter of a nerve fiber, and the aerobic glycolytic index, which captures the metabolic status of tumor tissues.

Clinical Feasibility of Automated Brain Tissue and Myelin Volumetry of Normal Brian Using Synthetic Magnetic Resonance Imaging With Fast Imaging Protocol: A Single-Center Pilot Study

OBJECTIVE

This study aimed to investigate the clinical feasibility of synthetic magnetic resonance imaging (MRI) with fast imaging protocol for automated brain tissue and myelin volumetry in healthy volunteers at 3.0-T MRI.

METHODS

Thirty-four healthy volunteers were scanned using synthetic MRI with 3 sets of scan parameters: groups Fast (FAS; 2 minutes, 29 seconds), Routine (ROU; 4 minutes, 7 seconds), and Research (RES; 7 minutes, 46 seconds). White matter (WM), gray matter (GM), cerebrospinal fluid (CSF), non-WM/GM/CSF (NoN), brain parenchymal volume (BPV), intracranial volume (ICV), and myelin volume (MYV) were compared between 3 groups. Linear correlation analysis was performed for measured volumes of groups FAS and ROU versus group RES.

RESULTS

Significant differences were found in all the measured brain tissue volumes between groups FAS and ROU (P < 0.001), FAS and RES (P < 0.05), and ROU and RES (P < 0.05), except for NoN between groups ROU and RES (P = 0.0673), ICV between groups FAS and ROU (P = 0.2552), and ICV between groups FAS and RES (P = 0.4898). The intergroup coefficients of variation were 4.36% for WM, 6.39% for GM, 10.14% for CSF, 67.5% for NoN, 1.21% for BPV, 0.08% for ICV, and 5.88% for MYV. Strong linear correlation was demonstrated for WM, GM, CSF, BPV, ICV, and MYV (R = 0.9230-1.131) between FAS versus RES, and ROU versus RES.

CONCLUSIONS

Using synthetic MRI with fast imaging protocol can change the measured brain tissue volumes of volunteers. It is necessary to use consistent acquisition protocols for comparing or following up cases quantitatively.