A Peel Test Method to Characterize the Decay Law of Prepreg Tape Tack at Different Temperatures

The tack of prepreg is a key factor affecting the automatic tape laying process. During the manufacturing process of large composite parts, prepreg material may be stored at room temperature for several days, resulting in a decrease in its tack. In this study, a new tack test tool was designed, and the decay rate of prepreg tack at different temperatures was tested. We proposed a prepreg tack decay model, which assumes that the main factor in tack decay is the reduction in resin chain activity during storage. The maximum deviation between the model calculation results and the experimental results of the tack decay rate is 9.7%. This study also proposed a new statistical unit for prepreg tack, which can establish the relationship between the tack of prepreg and its remaining storage time and reduce prepreg management costs.

Effect of Residue Acrylic Monomers in Synthesized Solvent-Free Photoreactive Pressure-Sensitive Adhesives on the Main Properties of Transfer Tapes Applied to Joining Wooden Elements

This publication describes the influence of residue monomers in synthesized pressure-sensitive adhesives based on acrylics on their main properties-tack, peel adhesion, shear strength and shrinkage-in the form of transfer tapes used for joining wooden elements in the furniture industry. The discussed carrier-free adhesive tapes are synthesized via photo-crosslinking and photopolymerization with UV radiation of the photoreactive prepolymers sandwiched between two adhesive siliconized polyester films. The simultaneous crosslinking and polymerization processes carried out under UV lamps placed simultaneously above and below the crosslinked photoreactive polymer layer lead to the production of a carrier-free adhesive film. The preliminary target of these studies was to investigate how the intensity of UV radiation and the time of its exposure affect the viscosity of the photoreactive compositions and the content of unreacted monomers in them. Next, the influence of the crosslinking agent concentration and UV irradiation time on the content of unreacted monomers after the crosslinking process was tested. The last step of the studies was the investigation of the influence of the residue monomer concentration on the application properties of the obtained pressure-sensitive adhesive layers. The typical PSA application properties were tested on the wood samples: tack, peel adhesion, shear strength (cohesion) and shrinkage.

Enhancing Transdermal Delivery: Investigating the Impact of Permeation Promoters on Ibuprofen Release and Penetration from Medical Patches-In Vitro Research

This study investigated the impact of various enhancers on permeation through the skin and accumulation in the skin from acrylic pressure-sensitive adhesive-based drug-in-adhesives matrix-type transdermal patches. Eleven patches, each containing a 5% enhancer of permeation, encompassing compounds such as salicylic acid, menthol, urea, glycolic acid, allantoin, oleic acid, Tween 80, linolenic acid, camphor, N-dodecylcaprolactam, and glycerin, were developed. Ibuprofen (IBU) was the model active substance, a widely-used non-steroidal anti-inflammatory drug. The results were compared to patches without enhancers and commercial preparations. The study aimed to assess the effect of enhancers on IBU permeability. The adhesive properties of the patches were characterised, and active substance permeability was tested. The findings revealed that patches with 5% allantoin exhibited the highest IBU permeability, approximately 2.8 times greater than patches without enhancers after 24 h. These patches present a potential alternative to commercial preparations, highlighting the significant impact of enhancers on transdermal drug delivery efficiency.

Mesh Migration and Bowel Perforation as a Late Complication of Transabdominal Preperitoneal Laparoscopic Hernia Repair

Minimally invasive surgery is increasingly used in the treatment of inguinal hernias, with two main techniques described: transabdominal preperitoneal (TAPP) and totally extraperitoneal (TEP). In both techniques, a prosthetic mesh is placed in a preperitoneal position. However, in TAPP, the peritoneum flap must be completely closed. The TAPP technique is associated with more intra-abdominal complications. This article describes a case of bowel occlusion due to migration and erosion of a mesh after a TAPP repair in a 57-year-old patient with a history of colonic diverticular disease. The patient complained of abdominal discomfort and constipation, having undergone a colonoscopy and CT scan that demonstrated the presence of a foreign body partially in the lumen of the sigmoid colon. The treatment was surgical, with bowel resection and partial removal of the mesh, complicated by a deep tissue collection. The patient maintained follow-up in a surgery consultation, with no evidence of hernia recurrence. This is a rare complication of the laparoscopic approach in the treatment of inguinal hernia, more frequent in the TAPP technique. It is intended to draw attention to the type of closure of the peritoneum.

Incorporation of Polymer-Grafted Cellulose Nanocrystals into Latex-Based Pressure-Sensitive Adhesives

While the improvement of water-based adhesives with renewable additives is important as industry shifts toward more sustainable practices, a complete understanding of how the compatibility between additives and polymers affects adhesive performance is currently lacking. To elucidate these links, cellulose nanocrystals (CNCs) were first functionalized via surface-initiated atom-transfer radical polymerization with the hydrophobic polymers poly(butyl acrylate) (PBA) and poly(methyl methacrylate) (PMMA) to facilitate their incorporation into latex-based pressure-sensitive adhesives (PSAs). Next, PBA latexes were synthesized using seeded semibatch emulsion polymerization with unmodified or polymer-grafted CNCs added in situ at a loading of 0.5 or 1 phm (parts per hundred parts of monomer). Viscosity and electron microscopy suggested that the polymer-grafted CNCs were incorporated inside or on the latex particles. PSAs containing any CNC type had one or more improved properties (compared to the no-CNC "base case"); CNCs with a low degree of polymerization (DP) grafts exhibited improved tack (up to 2.5-fold higher) and peel strength (up to 6-fold higher) relative to PSAs with unmodified CNCs. The best performing PSA contained the low DP PMMA-grafted CNCs, which is attributed to the higher glass transition temperature and the higher wettability of the PMMA grafts compared to PBA, and the more uniform dispersion of polymer-grafted CNCs throughout the PSA film. In contrast, PSAs containing CNCs with high DP grafts resulted in reduced tack and peel strength (compared to low DP grafts) due to enhanced CNC aggregation. Unfortunately, all PSAs containing polymer-grafted CNCs exhibited inferior shear strength relative to PSAs with unmodified CNCs (and comparable shear strength to the no-CNC "base case"). Collectively, these results provide guidelines for future optimization of more sustainable latex-based PSAs.

Sustainable UV-Crosslinkable Acrylic Pressure-Sensitive Adhesives for Medical Application

This study aimed to investigate the potential of photoreactive acrylate patches as systems for transdermal drug delivery, in particular, using more renewable alternatives and more environmentally friendly synthesis routes of transdermal patches. Therefore, the aim of this study was to develop a transdermal patch containing ibuprofen and investigate its performance in vitro through the pigskin. Transparent patches were prepared using four acrylate copolymers with an incorporated photoinitiator. Two types of transdermal patches based on the photocrosslinking acrylic prepolymers with isobornyl methacrylate as biocomponent and monomer increasing Tg ("hard") were manufactured. The obtained patches were characterized for their adhesive properties and tested for permeability of the active substance. It turns out that patches whose adhesive matrix is photoreactive polyacrylate copolymers have a higher cohesion than patches from commercial adhesives, while the modification of the copolymers with isobornyl methacrylate resulted in an improvement in adhesion and tack. This study demonstrates the feasibility of developing photoreactive acrylic-based transdermal patches that contain biocomponents that can deliver a therapeutically relevant dose of ibuprofen.

Device profile of the tack endovascular system® for the treatment of peripheral arterial disease: overview of safety and efficacy

Introduction: The 6 F Tack Endovascular System® is approved by the United States Food and Drug Administration (FDA) for post-percutaneous transluminal angioplasty (PTA) dissection repair in the superficial femoral and proximal popliteal arteries, and the 4 F System for post-PTA dissection repair in the mid/distal popliteal, peroneal and tibial arteries. The latter is the first FDA approval for an infra-popliteal implantable device.Areas covered: An evaluation of the Tack Endovascular System® design and a summary of the current safety and efficacy data.Expert opinion: Endovascular intervention for the treatment of symptomatic peripheral arterial disease (PAD) in the lower extremities is complicated by long-lesion length, extensive calcification and, below the knee, narrow vessel diameter. PTA is a foundational element for the treatment of these lesions and works by causing a controlled dissection and vessel expansion of the target lesion. Occasionally, dissections can extend beyond the target lesion and/or become hemodynamically significant due to lumen impingement necessitating additional intervention. Historically these dissections were treated with the use of stents, prolonged balloon inflation time or went untreated. The Tack Endovascular System® was designed to provide operators a safe and effective device which could repair post-PTA dissections while preserving future treatment options.

Artifacts and errors in the measurement of the stickiness of liquid foods with tack tests

We encounter stickiness in many areas of our daily life and as humans, we are able to discriminate different levels of stickiness. Yet attempts to measure stickiness with instruments have been challenging. One of the commonest approaches has been the "tack test" in which a probe is brought into contact with the sticky food and then pulled away while measuring the resisting force-various indices, such as the maximum force or the area below the force curve have been used to describe stickiness. This work rationalizes results from tack tests for liquid foods and helps us explain the influence of probe geometry. Photographic evidence of the way that the liquid adheres/detaches from the probe suggests that the terms "cohesive" and "adhesive" failure depend on the speed of the test. Application of a fixed deformation with time shows rapid loss of adhesive force suggesting that liquid samples flow from the probe. We propose that stickiness of liquid foods is entirely due to the liquid's viscosity and surface tension, and that measurements of tack for liquid foods-while highly reproducible-are entirely artifacts of the test method employed and are in effect snapshots in time of non-equilibrium processes.

The Reported Use of Tongue-Ties and Nosebands in Thoroughbred and Standardbred Horse Racing-A Pilot Study

Simple Summary

Tongue-ties (TTs) are commonly used in racing to restrain a horse’s tongue to aid a rider’s/driver’s control of the horse and optimise upper airway function. Nosebands (NBs) may also be employed for similar purposes. This article reports on a survey that asked people involved in Thoroughbred (TB) and Standardbred (SB) racing whether they used TTs and NBs and, if they did, the reasons for their use, the preferred design of device, the devices’ perceived effectiveness at achieving the respondents’ desired outcome(s), any complications due to their use and whether or not these complications altered their decision to use a particular type of TT or NB. A total of 112 participants involved with TB and SB racing answered TT questions. It revealed that respondents who used TTs believed them to be very or extremely effective at preventing the tongue from moving over the bit and improving upper airway function. Both physical and behavioural complications due to the use of a TT were reported. The likelihood of a respondent reporting a complication due to TT use increased with every minute of reported application and a nine-minute increment in the reported duration of application doubled the odds of a respondent reporting a behavioural complication. The findings of this study should be considered only as those of a pilot study and should be interpreted with caution due to the small number of responses.

Abstract

This article reports on the results of a survey of racehorse trainers (n = 112) outlining the reasons for tongue-tie (TT) and noseband (NB) use by Thoroughbred trainers (TBTs) (n = 72) and Standardbred trainers (SBTs) (n = 40). The study also investigated the reported effectiveness of TTs and possible complications arising from their use. Tongue-tie use was reported by 62.5% (n = 70) of racehorse trainers. The reasons for TT use varied between TBTs and SBTs. For TBTs, the most common reason for TT use was to prevent or reduce airway obstruction (72.3%, n = 34), followed closely by to prevent or reduce airway noise (55.3%, n = 16). Standardbred trainers assigned equal importance for TT use [to prevent or reduce airway obstruction (69.6%, n = 16) and to prevent the horse from moving its tongue over the bit (69.6%, n = 16)]. Tongue-ties were considered significantly less effective at improving performance than at reducing airway obstruction and preventing the tongue from moving over the bit (t = −2.700, p = 0.0007). For respondents who used both TTs and NBs, there was a mild to moderate positive association between the reasons for using TTs and NBs. Of the 70 TT-using respondents, 51.4% (n = 36) recorded having encountered either a physical or behavioural complication due to TT use, with redness/bruising of the tongue (20.0%, n = 14) being the most common physical complication reported. Duration of use influenced the risk of observing complications. The likelihood of a respondent reporting a behavioural complication due to TT use increased with every minute of reported application and a nine-minute increment in application period doubled the odds of a respondent reporting a complication. Tightness was a risk factor for physical complications: Checking TT tightness by noting the tongue as not moving was associated with increased reporting of physical complications (OR = 6.59; CI 1.1–67.5). This pilot study provides some insight into how and why TTs are applied by some racehorse trainers, and the potential risks associated with their use. A further study of a larger cohort is recommended because these results are valid for only the 112 trainers who responded and cannot be generalized to the equine industry.

New Waterborne Polyurethane-Urea Synthesized with Ether-Carbonate Copolymer and Amino-Alcohol Chain Extenders with Tailored Pressure-Sensitive Adhesion Properties

New waterborne polyurethane-urea dispersions with adequate adhesion and cohesion properties have been synthesized by reacting isophorone diisocyanate, copolymer of ether and carbonate diol polyol and three amino-alcohols with different number of OH groups chain extenders using the prepolymer method. The waterborne polyurethane-urea dispersions were characterized by pH, particle-size distribution, and viscosity, and the polyurethane-urea films were characterized by attenuated total reflectance infrared (ATR-IR) spectroscopy, differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA), and plate-plate rheology (temperature and frequency sweeps). Polyurethane-urea pressure-sensitive adhesives (PUU PSAs) were prepared by placing the waterborne polyurethane dispersions on polyethylene terephthalate (PET) films and they were characterized at 25 °C by creep test, tack and 180° peel test. The waterborne polyurethane-urea dispersions showed mean particle sizes between 51 and 78 nm and viscosities in the range of 58–133 mPa·s. The polyurethane-urea films showed glass transition temperatures (T_gs) lower than −64 °C, and they showed a cross of the storage and loss moduli between −8 and 68 °C depending on the number of OH groups in the amino-alcohol chain extender. Different types of PUU PSAs (removable, high shear) were obtained by changing the number of OH groups in the amino-alcohol chain extender. The tack at 25 °C of the PUU PSAs varied between 488 and 1807 kPa and the 180° peel strength values ranged between 0.4 and 6.4 N/cm, and their holding times were between 2 min and 5 days. The new PUU PSAs made with amino-alcohol chain extender seemed very promising for designing environmentally friendly waterborne PSAs with high tack and improved cohesion and adhesion property.

Balanced Viscoelastic Properties of Pressure Sensitive Adhesives Made with Thermoplastic Polyurethanes Blends

Pressure sensitive adhesives made with blends of thermoplastic polyurethanes (TPUs PSAs) with satisfactory tack, cohesion, and adhesion have been developed. A simple procedure consisting of the physical blending of methyl ethyl ketone (MEK) solutions of two thermoplastic polyurethanes (TPUs) with very different properties—TPU1 and TPU2—was used, and two different blending procedures have been employed. The TPUs were characterized by infra-red spectroscopy in attenuated total reflectance mode (ATR-IR spectroscopy), differential scanning calorimetry, thermal gravimetric analysis, and plate-plate rheology (temperature and frequency sweeps). The TPUs PSAs were characterized by tack measurement, creep test, and the 180° peel test at 25 °C. The procedure for preparing the blends of the TPUs determined differently their viscoelastic properties, and the properties of the TPUs PSAs as well, the blending of separate MEK solutions of the two TPUs imparted higher tack and 180° peel strength than the blending of the two TPUs in MEK. TPU1 + TPU2 blends showed somewhat similar contributions of the free and hydrogen-bonded urethane groups and they had an almost similar degree of phase separation, irrespective of the composition of the blend. Two main thermal decompositions at 308–317 °C due to the urethane hard domains and another at 363–373 °C due to the soft domains could be distinguished in the TPU1 + TPU2 blends, the weight loss of the hard domains increased and the one of the soft domains decreased by increasing the amount of TPU2 in the blends. The storage moduli of the TPU1 + TPU2 blends were similar for temperatures lower than 20 °C and the moduli at the cross over of the moduli were lower than in the parent TPUs. The improved properties of the TPU1 + TPU2 blends derived from the creation of a higher number of hydrogen bonds upon removal of the MEK solvent, which lead to a lower degree of phase separation between the soft and the hard domains than in the parent TPUs. As a consequence, the properties of the TPU1 + TPU2 PSAs were improved because good tack, high 180° peel strength, and sufficient cohesion were obtained, particularly in 70 wt% TPU1 + 30 wt% TPU2 PSA.

[Comparison of Adhesive Properties of Transdermal Patches Distributing in Japan-Tack and Peel Strength]

Forty-four brands of transdermal patches for twelve kinds of active pharmaceutical ingredients (APIs) are available in Japan as of April 30, 2018. Although approximately one-third of the corresponding pharmaceutical interview forms lack information on how to evaluate the adhesive properties of the patches, the peel test, probe tack test, or inclined ball tack test have generally been adopted. This means that it might be difficult to simply compare the adhesive properties among the patches because the testing methods are not unified in some cases. In this study, measurements of the adhesive properties of 38 transdermal patches of ten different APIs were performed using several unified testing methods (180° peel test, 90° peel test, self-adhesion test, and probe tack test) under unified experimental conditions. The adhesive properties were found to be quite different among the patches, even for the same API, dose, and size. For example, the ratios of the maximum to minimum measured values of tack and 180° peel strength for tulobuterol patches were 5 and 29, respectively. In the case of generic products for which the bioequivalence to a brand-name product is assured, the variation in adhesive properties can extend the range of choices for patients, which is advantageous. Providing information to medical experts on adhesive properties through, for example, pharmaceutical interview forms and package inserts, is considered to be useful for helping patients to make better choices.

New Binary Blends of Ethylene-co-n-butyl Acrylate (EBA) Copolymer and Low Molecular Weight Rosin Ester Resin with Potential as Pressure Sensitive Adhesives

For improving the adhesion property of ethylene-co-n-butyl acrylate copolymer (EBA) at ambient temperature, binary blends of EBA with 27 wt% n-butyl acrylate and different amounts (20–62 wt%) of low molecular weight hydrogenated glycerol rosin ester (ECH) resin have been prepared. The addition of glycerol rosin ester resin decreased the crystallinity and size of the ethylene domains of the EBA copolymer. The addition of up to 50 wt% (100 phr) ECH resin improved the compatibility with the EBA copolymer, whereas when more than 50 wt% (100 phr) ECH resin was added, the compatibility of the blends did not change but the viscoelastic properties were noticeably decreased. Furthermore, the compatibility was noticeably improved by adding only 20 wt% ECH resin although the best compromise between compatibility and viscoelasticity corresponded to the binary blend made with 43 wt% ECH resin. The EBA copolymer + ECH resin blends showed high tack (initial adhesion) at 25 °C and some of them even at 5 °C, and they have adequate 180° peel strength both to polar (polyethylene terephthalate-PET) and nonpolar (polypropylene-PP) substrate. Furthermore, all EBA copolymer + ECH resin blends showed high shear strength at 25 °C. Finally, the blend with 43 wt% ECH resin showed excellent pressure sensitive adhesive property exhibiting excellent creep, high tack, high 180° peel strength, and high single lap-shear strength.

Lesions associated with the use of bits, nosebands, spurs and whips in Danish competition horses

BACKGROUND

Information is needed to guide sport administrators in formulating rules for equipment use in competitions.

OBJECTIVES

To seek associations between spurs, bits, nosebands and whips with injuries in horses during competitions in four equestrian sports.

STUDY DESIGN

Cross sectional study.

METHODS

Post competition evaluations were performed in 3143 horse/rider combinations competing in Danish Equestrian Federation competitions in dressage, showjumping, eventing and endurance by trained evaluators who recorded the presence and type of spurs, bits, nosebands, and whips. Further evaluations recorded noseband tightness, (in three categories <2 cm, 2-3 cm, >3 cm), the presence of hair or blood on spurs; hair loss, lesions or blood on the ribcage behind the girth; abrasions and/or blood at the commissures of the lips; and swelling, lesions or blood on the forequarters or hindquarters. Statistical analysis was performed to determine relationships between discipline (dressage, showjumping, eventing, endurance), level of competition (level 0-7), type/tightness of equipment, and prevalence of injuries.

RESULTS

The presence of hair (3.2% of horse/rider combinations) and blood (0.4% of horse/rider combinations) on spurs were highly associated. Longer spurs and lower competition levels were significantly associated with hair on the spurs and worn hair on the horse's ribcage. Oral lesions or blood were visible at the commissures of the lips in 9.2% of horses and increased with level of competition but did not differ between bit types or bitless bridles. Looser upper noseband category was associated with decreased risk of oral lesions (odds ratio [OR] 0.66, 95% confidence interval [95% CI] 0.51-0.86, P = 0.002). However, the absence of a cavesson increased the risk of lesions at the commissures of the lips 2.39 times compared with the loosest noseband (95% CI 1.4-4.11, P = 0.002).

MAIN LIMITATIONS

The rules of the equestrian federation did not permit a full intraoral examination. Selection of rider/horse combination was not random.

CONCLUSIONS

Lesions of the skin or mucosa at the commissures of the lips may be decreased by limiting noseband tightness and lesions on the chest wall may be decreased by limiting the length of spurs.

Use of Nonabsorbable Spiral Tacks for Mesh Reinforcement in Thoracoscopic Repair of Congenital Diaphragmatic Hernia

Thoracoscopic prosthetic repair of congenital diaphragmatic hernia (CDH) is a well-established and safe technique in experienced hands but the patching procedure is technically demanding and time consuming. To address the challenges associated with this process (confined working space and restricted time), the aim of this article is to assess the potential improvements in feasibility, efficacy, and safety of patch fixation by using nonabsorbable helicoidal tacks in neonates and infants for the repair of large CDH by thoracoscopy. The new technique has all the advantages of minimal invasive surgery in very young children combined with the advantages of reduced operating time and increased simplicity, and may be a good option in cases of recurrence.

Combined Effect of Chain Extension and Supramolecular Interactions on Rheological and Adhesive Properties of Acrylic Pressure-Sensitive Adhesives

A new approach for the elaboration of low molecular weight pressure-sensitive adhesives based on supramolecular chemistry is explored. The synthesis of model systems coupled with probe-tack tests and rheological experiments highlights the influence of the transient network formed by supramolecular bonds on the adhesion energy. The first step of our approach consists of synthesizing poly(butyl acrylate-co-glycidyl methacrylate) copolymers from a difunctional initiator able to self-associate by four hydrogen bonds between urea groups. Linear copolymers with a low dispersity (M_n = 10 kg/mol, Ip < 1.4) have been synthesized via atom transfer radical polymerization. Films of the copolymers were then partially cross-linked through reaction of the epoxy functions with a diamine. The systematic variation of the average ratio of glycidyl methacrylate and diamine per copolymer shed light on the respective role played by the supramolecular interactions (between bis-urea groups and with the side chains) and by the chain extension and branching induced by the diamine/epoxy reaction. In this strategy, the adhesive performance can be optimized by modifying the strength of "stickers" (via the structure of the supramolecular initiator, for instance) and the polymer network (e.g., via the length and level of branching of the copolymer chains) in order to approach commercial PSA-like properties (high debonding energy and clean removal).

Early experimental and clinical experience with a focal implant for lower extremity post-angioplasty dissection

OBJECTIVES

This study provides preliminary data on the safety and feasibility of the use of a novel focal implant for managing post-percutaneous transluminal balloon angioplasty (post-PTA) dissection.

BACKGROUND

Post-PTA dissection of the lower extremity arteries is managed with stent placement. This provides an acceptable post-intervention result but has long-term disadvantages, such as in-stent restenosis. Focal treatment of post-PTA dissection and avoidance of stents are the objectives of the Tack-It (Intact Vascular, Inc., Wayne, Pennsylvania) device.

METHODS

A preclinical study and first-in-human data are presented. Seven swine underwent superficial femoral artery device placement, with a self-expanding nitinol stent on 1 side and a series of 4 Tack-It devices on the other side. Specimens were harvested at 28 days. The clinical study included 15 limbs that underwent revascularization for critical limb ischemia (n = 9) or claudication (n = 6). Twenty-five lesions were treated in the superficial femoral (n = 8), popliteal (n = 7), and tibial (n = 10) arteries.

RESULTS

The preclinical study demonstrated a reduction in stenosis with the Tack-It (16.8 ± 2.6%) compared with stents (46.4 ± 9.8%). Neointimal thickness and injury score decreased with the Tack-It. Clinically, Tack-It placement resulted in acute technical success with resolution of the post-PTA dissection in 100% of lesions. There were no device-related complications or major amputations. Eighteen of the 25 lesions were available for angiographic follow-up at 1-year, and patency was 83.3%.

CONCLUSIONS

Preclinical data suggest that the Tack-It device causes minimal vessel injury. Clinical use of the Tack-It to manage post-PTA dissection was safe and feasible in this early study and resulted in apposition of dissection flaps without stent placement.

Pressure-Sensitive Adhesives under the Influence of Relative Humidity: Inner Structure and Failure Mechanisms

Model pressure-sensitive adhesive (PSA) films of the statistical copolymer P(EHA-stat-20MMA), which comprises 80% ethylhexyl acrylate (EHA) and 20% methyl methacrylate (MMA), are studied. The PSA films are stored under different relative humidities from <2% to 96% for 24 h and subsequently investigated concerning the near-surface composition profile by measuring X-ray reflectivity (XRR) and tack performance. For both types of measurements, special custom-made sample environments are used, which ensure constant temperature and relative humidity during the XRR and tack measurements. Different failure mechanisms of the adhesive bond are found by adjusting the relative humidity. XRR measurements evidence enrichment layers in vicinity to and at the surface depending on the provided relative humidity during the postproduction treatment, which also influence the tack performance. This finding is supported by tack measurements using punches with different roughness.

Preparation and in vitro evaluation of a new fentanyl patch based on functional and non-functional pressure sensitive adhesives

In this study, some single-layer and double-layer transdermal drug delivery systems (TDDSs) with different functional and non-functional acrylic pressure-sensitive adhesives (PSAs) were prepared. For this purpose, fentanyl as a drug was used. The effects of PSAs type, single-layer and double-layer TDDSs on skin permeation and in vitro drug release from devices were evaluated using a hydrodynamically well-characterized Chien permeation system fitted with excised rat abdominal skin. The adhesion properties of devices such as peel strength and tack values were obtained as well. It was found that TDDS with -COOH functional PSA showed the lowest steady-state flux. Double-layer TDDS displayed a constant flux up to 72 h. In double- and single-layer devices after 1 and 3 h, respectively, drug release followed Higuchi's kinetic model. Formulations with the highest percentage of -COOH functional PSA have displayed the lowest flux. The double-layer TDDSs with non-functional PSA demonstrated the suitable skin permeation rate close to Duragesic(R) TDDS and suitable adhesion properties.