The Influence of Layer Stacking Method on the Mechanical Properties of Honeycomb Skeleton

The performance of a multi-layer honeycomb skeleton can be significantly enhanced through tandem connection, while the structure's properties can be tailored by altering the layer stacking method of the honeycomb skeleton. To investigate the impact of layer stacking methods on the mechanical properties of multilayer honeycomb skeletons, 3D printing technology was used to prepare double-layer honeycomb skeleton tandem structures with different dislocation modes in compression testing. A finite element simulation model was established to conduct quasi-static simulation research. Compared to that of a single-layer honeycomb skeleton, the energy absorption of the honeycomb skeleton tandem structure increased. The optimal bearing capacity of the honeycomb skeleton was achieved when the upper and lower layers were precisely aligned. Once dislocation occurred, both the value of average platform stress and energy absorption decreased. Then, the bearing capacity of the honeycomb skeleton tandem structures increased with an enlargement of the dislocation, reaching its maximum at the half-dislocation period. An increase in the partition thickness and stiffness led to a reduction in the dislocation-induced effects on the mechanical properties. The research results can provide theoretical and data support for the engineering application of honeycomb skeleton tandem structures.

Self-Powered Thermoelectric Hydrogen Sensors Based on Low-Cost Bismuth Sulfide Thin Films: Quick Response at Room Temperature

Thermoelectric (TE)-based gas sensors have attracted significant attention due to their high selectivity, low power consumption, and minimum maintenance requirements. However, it is challenging to find low-cost, environmentally friendly materials and simple device fabrication processes for large-scale applications. Herein, we report self-powered thermoelectric hydrogen (TEH) sensors based on bismuth sulfide (Bi₂S₃) fabricated from a low-cost Bi₂S₃ TE layer and platinum (Pt) catalyst. When working at room temperature, the monomorphic-type TEH sensor obtained an output response signal of 42.2 μV with a response time of 17 s at a 3% hydrogen atmosphere. To further improve device performance, we connected the patterned Bi₂S₃ films in series to increase the Seebeck coefficient to -897 μV K^-1. For comparison, the resulting N tandem-type TEH sensor yielded a distinguished output voltage of 101.4 μV, which was greater than the monomorphic type by a factor of 2.4. Significantly, the response and recovery time of the N-tandem-type TEH sensor to 3% hydrogen were shortened to 14 and 15 s, respectively. This work provides a simple, environmentally friendly, and low-cost strategy for fabricating high-performance TEH sensors by applying low-cost Bi₂S₃ TE materials.

Perovskite-Gallium Nitride Tandem Light-Emitting Diodes with Improved Luminance and Color Tunability

Tandem structures with different subpixels are promising for perovskite-based multicolor electroluminescence (EL) devices in ultra-high-resolution full-color displays; however, realizing excellent luminance- and color-independent tunability considering the low brightness and stability of blue perovskite light-emitting diodes (PeLEDs) remains a challenge. Herein, a bright and stable blue gallium nitride (GaN) LED is utilized for vertical integration with a green MAPbBr₃ PeLED, successfully achieving a Pe-GaN tandem LED with independently tunable luminance and color. The electronic and photonic co-excitation (EPCE) effect is found to suppress the radiative recombination and current injection of PeLEDs, leading to degraded luminance and current efficiency under direct current modulation. Accordingly, the pulse-width modulation is introduced to the tandem device with a negligible EPCE effect, and the average hybrid current efficiency is significantly improved by 139.5%, finally achieving a record tunable luminance (average tuning range of 16631 cd m^-2 at an arbitrary color from blue to green) for perovskite-based multi-color LEDs. The reported excellent independent tunability can be the starting point for perovskite-based multicolor EL devices, enabling the combination with matured semiconductor technologies to facilitate their commercialization in advanced display applications with ultra-high resolution.

Hybrid Organic-Inorganic Perovskite Halide Materials for Photovoltaics towards Their Commercialization

Hybrid organic-inorganic perovskite (HOIP) photovoltaics have emerged as a promising new technology for the next generation of photovoltaics since their first development 10 years ago, and show a high-power conversion efficiency (PCE) of about 29.3%. The power-conversion efficiency of these perovskite photovoltaics depends on the base materials used in their development, and methylammonium lead iodide is generally used as the main component. Perovskite materials have been further explored to increase their efficiency, as they are cheaper and easier to fabricate than silicon photovoltaics, which will lead to better commercialization. Even with these advantages, perovskite photovoltaics have a few drawbacks, such as their stability when in contact with heat and humidity, which pales in comparison to the 25-year stability of silicon, even with improvements are made when exploring new materials. To expand the benefits and address the drawbacks of perovskite photovoltaics, perovskite-silicon tandem photovoltaics have been suggested as a solution in the commercialization of perovskite photovoltaics. This tandem photovoltaic results in an increased PCE value by presenting a better total absorption wavelength for both perovskite and silicon photovoltaics. In this work, we summarized the advances in HOIP photovoltaics in the contact of new material developments, enhanced device fabrication, and innovative approaches to the commercialization of large-scale devices.

Wide-Gap Perovskite via Synergetic Surface Passivation and Its Application toward Efficient Stacked Tandem Photovoltaics

Superior bandgap tunability enables solution-processed halide perovskite a promising candidate for multi-junction photovoltaics (PVs). Particularly, optically coupling wide-gap perovskite by stacking with commercially available PVs such as silicon and CIGS (also known as 4-terminal tandem) simplifies the technology transfer process, and further advances the commercialization potential of perovskite technology. However, compared with matured PV materials and the phase-pure FAPbI₃ , wide-gap perovskite still suffers from huge voltage deficits. Here, the authors take advantage of the synergetic effect behind a sequential fluoride and organic ammonium salt surface passivation strategy to control non-radiative energy losses, and obtained a 17.7% efficiency in infrared-transparent wide-gap perovskite solar cells (21.1% for opaque device), and achieved efficiencies of over 25% when stacked with commercial Si and CIGS products with original PCEs of 18-20% under a 4-terminal working condition.

Solution-Processed Double-Junction Quantum-Dot Light-Emitting Diodes with an EQE of Over 40

Despite the rapid development in quantum-dot light-emitting diodes (QD-LEDs) with a single junction, it remains a big challenge to make tandem QD-LEDs with high performance. Here, we report solution-processed double-junction tandem QD-LEDs with a high external quantum efficiency of 42.2% and a high current efficiency of 183.3 cd A^-1, which are comparable to those of the best vacuum-deposited tandem organic LEDs. Such high-efficiency devices are achieved by interface engineering of fully optimized single light-emitting units, which improves carriers' transport/injection balance and suppresses exciton quenching induced by ZnO, and design of an effective interconnecting layer consisting of poly(4-butylphenyl-diphenylamine) (poly-TPD)-mixed poly(9-vinylcarbazole) (PVK)/poly(3,4-ethylenedioxythiophene):polystyrene sulfonate/polyethylenimine ethoxylated-modified ZnO.

Efficient Red/Green/Blue Tandem Quantum-Dot Light-Emitting Diodes with External Quantum Efficiency Exceeding 21

Highly efficient tandem quantum-dot light-emitting diodes (QLEDs) are developed by using an interconnecting layer (ICL) with the structure of ZnMgO/Al/HATCN/MoO₃. The developed ICL exhibits high transparency, efficient charge generation/injection capability, and high robustness to resist solvent damage during deposition of the upper functional layers. With the proposed ICL, full color (red/green/blue, R/G/B) tandem QLEDs are demonstrated with extremely high current efficiency and external quantum efficiency (EQE): 17.9 cd/A and 21.4% for B-QLEDs, 121.5 cd/A and 27.6% for G-QLEDs, 41.5 cd/A and 23.1% for R-QLEDs. To the best of our knowledge, these are the highest values ever reported. In addition, the EQEs of R-, G-, and B-QLEDs all exceed 21%. The high efficiency can be well maintained over a wide range of luminance from 10² to 10⁴ cd/m². For example, even at a high brightness of 20 000 cd/m², the EQE of R-, G-, and B-QLEDs can still sustain its 96%, 99%, and 78% maximum value, respectively. The demonstrated full-color tandem QLEDs, with extremely high efficiency, long operational lifetime, low roll-off efficiency, and high color purity, would be ideal candidates to bring QLEDs into the next generation of full-color displays and the solid-state lighting market.

Highly Simplified Tandem Organic Light-Emitting Devices Incorporating a Green Phosphorescence Ultrathin Emitter within a Novel Interface Exciplex for High Efficiency

Herein we report a novel design philosophy of tandem OLEDs incorporating a doping-free green phosphorescent bis[2-(2-pyridinyl-N)phenyl-C](acetylacetonato)iridium(III) (Ir(ppy)₂(acac)) as an ultrathin emissive layer (UEML) into a novel interface-exciplex-forming structure of 1,1-bis[(di-4-tolylamino)phenyl]cyclohexane (TAPC) and 1,3,5-tri(p-pyrid-3-yl-phenyl)benzene (TmPyPB). Particularly, relatively low working voltage and remarkable efficiency are achieved and the designed tandem OLEDs exhibit a peak current efficiency of 135.74 cd/A (EQE = 36.85%) which is two times higher than 66.2 cd/A (EQE = 17.97%) of the device with a single emitter unit. This might be one of the highest efficiencies of OLEDs applying ultrathin emitters without light extraction. Moreover, with the proposed structure, the color gamut of the displays can be effectively increased from 76% to 82% NTSC if the same red and blue emissions as those in the NTSC are applied. A novel form of harmonious fusion among interface exciplex, UEML, and tandem structure is successfully realized, which sheds light on further development of ideal OLED structure with high efficiency, simplified fabrication, low power consumption, low cost, and improved color gamut, simultaneously.

Improved Efficiency and Enhanced Color Quality of Light-Emitting Diodes with Quantum Dot and Organic Hybrid Tandem Structure

Light-emitting diodes based on organic (OLEDs) and colloidal quantum dot (QLEDs) are widely considered as next-generation display technologies because of their attractive advantages such as self-emitting and flexible form factor. The OLEDs exhibit relatively high efficiency, but their color saturation is quite poor compared with that of QLEDs. In contrast, the QLEDs show very pure color emission, but their efficiency is lower than that of OLEDs currently. To combine the advantages and compensate for the weaknesses of each other, we propose a hybrid tandem structure which integrates both OLED and QLED in a single device architecture. With ZnMgO/Al/HATCN interconnecting layer, hybrid tandem LEDs are successfully fabricated. The demonstrated hybrid tandem devices feature high efficiency and high color saturation simultaneously; for example, the devices exhibit maximum current efficiency and external quantum efficiency of 96.28 cd/A and 25.90%, respectively. Meanwhile, the full width at half-maximum of the emission spectra is remarkably reduced from 68 to 44 nm. With the proposed hybrid tandem structure, the color gamut of the displays can be effectively increased from 81% to 100% NTSC. The results indicate that the advantages of different LED technologies can be combined in a hybrid tandem structure.