Supercapillary Architecture-Activated Two-Phase Boundary Layer Structures for Highly Stable and Efficient Flow Boiling Heat Transfer

Development of smaller, faster, and more powerful electronic devices requires effective cooling strategies to efficiently remove ever-greater heat. Phase-change heat transfer such as boiling and evaporation has been widely exploited in various water-energy industries owing to its efficient heat transfer mode. Despite extensive progress, it remains challenging to achieve the physical limit of flow boiling due to highly transitional and chaotic nature of multiphase flows as well as unfavorable boundary layer structures. Herein, a new strategy that promises to approach the physical limit of flow boiling heat transfer is reported. The flow boiling device with multiple channels is characterized with the design of micropinfin fences, which fundamentally transforms the boundary layer structures and imparts significantly higher heat transfer coefficient even at high heat flux conditions, in which boiling heat transfer is usually deteriorated due to the development of dryout starting from outlet regions and severe two-phase flow instabilities. Moreover, the approaching of physical limit is achieved without elevating pressure drop.

SARS-CoV-2 detection in sewage samples: Standardization of method & preliminary observations

Background & objectives

Since its first recognition in Wuhan, China, in December 2019, the SARS-CoV-2 has spread rapidly across the world. Though SARS-CoV-2 spreads mainly via the droplets of respiratory secretions, it was also detected in stool samples of patients, indicating active infection of the gastrointestinal tract. Presence of SARS-CoV-2 RNA in sewage samples was reported in February 2020, raising the possibility of using environmental water surveillance to monitor SARS-CoV-2 activity in infected areas. The aim of this study was to standardize the methodology for detection of SARS-CoV-2 from sewage and explore the feasibility of establishing supplementary surveillance for COVID-19.

Methods

Sewage specimens were collected from six sites in Mumbai, India, using the grab sample method and processed using polyethylene glycol (PEG)-dextran phase separation method for virus concentration. Real-time reverse transcription-polymerase chain reaction (RT-PCR) assay was used to detect the presence of SARS-CoV-2 RNA.

Results

A total of 20 sewage samples collected from six different wards in Mumbai city, before the spread of SARS-CoV-2 infections and during May 11-22, 2020, were processed using the phase separation method. The WHO two-phase PEG-dextran method was modified during standardization. SARS-CoV-2 was found to concentrate in the middle phase only. All samples collected before March 16, 2020 were SARS-CoV-2 negative. Viral RNA was detected in sewage samples collected during the ongoing COVID-19 pandemic in all the six wards.

Interpretation & conclusions

PEG-dextran phase separation method was effectively used to concentrate SARS-CoV-2 from domestic waste waters to detection levels. It would be feasible to initiate sewage surveillance for SARS-CoV-2 to generate data about the viral transmission in various epidemiologic settings.

CaFÉ: A Sensitive, Low-Cost Filtration Method for Detecting Polioviruses and Other Enteroviruses in Residual Waters

Acute flaccid paralysis (AFP) surveillance has been used to identify polio cases and target vaccination campaigns since the inception of the Global Poliovirus Eradication Initiative (GPEI) in 1988. To date, only Afghanistan and Pakistan have failed to interrupt wild poliovirus transmission. Circulation of vaccine-derived polioviruses (VDPV) continues to be a problem in high-risk areas of the Eastern Mediterranean, African, and Southeast Asian regions. Environmental surveillance (ES) is an important adjunct to AFP surveillance, helping to identify circulating polioviruses in problematic areas. Stools from AFP cases and contacts (>200,000 specimens/year) and ES samples (>642 sites) are referred to 146 laboratories in the Global Polio Laboratory Network (GPLN) for testing. Although most World Health Organization supported laboratories use the two-phase separation method due to its simplicity and effectiveness, alternative simple, widely available, and cost-effective methods are needed. The CAFÉ (Concentration and Filtration Elution) method was developed from existing filtration methods to handle any type of sewage or residual waters. At $10-20 US per sample for consumable materials, CAFÉ is cost effective, and all equipment and reagents are readily available from markets and suppliers globally. The report describes the results from a parallel study of CAFÉ method with the standard two-phase separation method. The study was performed with samples collected from five countries (Guatemala, Haïti, Thailand, Papua New Guinea, and the Philippines), run in three laboratories-(United States, Thailand and in the Philippines) to account for regional and sample-to-sample variability. Samples from each site were divided into two 500 ml aliquots and processed by both methods, with no other additional concentration or manipulation. The results of 338 parallel-tested samples show that the CAFÉ method is more sensitive than the two-phase separation method for detection of non-polio enteroviruses (p-value < 0.0001) and performed as well as the two-phase separation method for polioviruses detection with no significant difference (p-value > 0.05). The CAFÉ method is a robust, sensitive, and cost-effective method for isolating enteroviruses from residual waters.