Evaluation of chromatin integrity in human sperm using acridine orange staining with different fixatives and after cryopreservation

Staining of cells with acridine orange (AO) has been widely accepted as a predictor of DNA damage in many cell types. Because of variability of protocols used in previous studies, the AO staining technique has not been widely accepted as a screening test to predict DNA damage in human sperm. In order to further validate the use of AO staining, sperm were evaluated using numerous variations in the staining protocol. This study also elucidated the effects of cryopreservation on sperm DNA. Sperm fixation in Carnoy's solution showed significantly (P < 0.05) more DNA damage (29.9 +/- 4.5%) than 2% glutaraldehyde (14.4 +/- 2.1%), 4% paraformaldehyde (5.5 +/- 1.7%), no fixation (15.8 +/- 4.3%) but did not differ from Diff Quik solution (19.2 +/- 5.8%). No difference was observed for sperm DNA damage assessment using a 0.2 m (15.5 +/- 3.2%) or 0.3 m (14.9 +/- 3.3%) concentration of Na(2)HPO(4).7H(2)O in the AO staining solution. Frozen-thawed semen samples showed increased damage to sperm DNA under both Carnoy's (fresh: 10.9 +/- 1.3%; frozen: 30.8 +/- 2.9%; P < 0.05) and Diff Quik fixation (fresh: 6.2 +/- 0.8; frozen: 17.1 +/- 2.5%P < 0.05). Present data also showed that spermatozoa from some individuals are more prone to DNA damage after freezing and thawing procedures than others. In conclusion, Carnoy's fixative provides a better predictive value for DNA damage to sperm using AO staining. Additionally, cryopreservation increased damage to the sperm DNA.

Effects of spray drying on physicochemical properties of chitosan acid salts

The effects of spray-drying process and acidic solvent system on physicochemical properties of chitosan salts were investigated. Chitosan used in spray dryings was obtained by deacetylation of chitin from lobster (Panulirus argus) origin. The chitosan acid salts were prepared in a laboratory-scale spray drier, and organic acetic acid, lactic acid, and citric acid were used as solvents in the process. The physicochemical properties of chitosan salts were investigated by means of solid-state CP-MAS (13)C nuclear magnetic resonance (NMR), X-ray powder diffraction (XRPD), differential scanning calorimetry, and Fourier transform infrared spectrometry (FTIR) and near-infrared spectroscopy. The morphology of spray-dried chitosan acid salts showed tendency toward higher sphericity when higher temperatures in a spray-drying process were applied. Analysis by XRPD indicated that all chitosan acid salts studied were amorphous solids. Solid-state (13)C NMR spectra revealed the evidence of the partial conversion of chitosan acetate to chitin and also conversion to acetyl amide form which appears to be dependent on the spray-drying process. The FTIR spectra suggested that the organic acids applied in spray drying may interact with chitosan at the position of amino groups to form chitosan salts. With all three chitosan acid salts, the FTIR bands at 1,597 and 1,615 cm(-1) were diminished suggesting that -NH groups are protonated. The FTIR spectra of all chitosan acid salts exhibited ammonium and carboxylate bands at 1,630 and 1,556 cm(-1), respectively. In conclusion, spray drying is a potential method of preparing acid salts from chitosan obtained by deacetylation of chitin from lobster (P. argus) origin.

Utilization of the skin attachment model to determine the antibacterial efficacy of potential carcass treatments

Two experiments (EXP), utilizing the skin attachment model (SAM), were conducted to determine the bactericidal activity of six potential carcass disinfectants [EXP 1: 20, 400, and 800 ppm sodium hypochlorite; EXP 2: 5% acetic acid (AA), 8% trisodium phosphate (TSP), and 1% sodium metabisulfite (SS)] during simulated scalder (50 C for 2 min), chiller (0 C for 60 min), or post-process dip (23 C for 15 s) application. Efficacies of treatments were determined against populations of Salmonella typhimurium that were "loosely" or "firmly" attached to chicken breast skin (10 cm diameter). For comparison, activity of the six disinfectants was also determined against S. typhimurium in aqueous suspension. All disinfectants except SS reduced numbers of freely suspended S. typhimurium by > or = 4.5 log10 cfu/mL. The sodium metabisulfite did not reduce populations of salmonellae. In both EXP, there were disinfectant by application interactions (P < 0.05) on activity against loosely and firmly attached cells. Sodium hypochlorite at 20 ppm had little activity regardless of application, whereas higher levels were more effective (P < 0.001), particularly in the chiller application, in which loosely and firmly attached populations were reduced by 2.3 to 2.5 and 1.3 to 1.9 log10 cfu per skin, respectively. In EXP 2, SS showed no activity regardless of application. Trisodium phosphate was similarly effective (reduction by 1.2 to 1.8 log10 cfu per skin) in all applications (P > 0.05). In contrast, AA activity was affected by the application method (P < 0.05). Against loosely attached cells, AA was most effective in the chiller application (2.5 log10 reduction), whereas against firmly attached cells, AA was effective only in the scalder application (2.0 log10 reduction). Attachment of S. typhimurium to poultry skin apparently increased the ability of the bacteria to resist various disinfectants, and efficacy was influenced by extent of attachment of bacteria to skin and method of disinfectant application.

Stable isotope ratio analysis for verifying the authenticity of balsamic and wine vinegar

In this paper, we investigate whether the analysis of stable isotope ratios D/H and ¹³C/¹²C in ethanol and acetic acid and of ¹⁸O/¹⁶O in water can be applied to the ingredients of "aceto balsamico di Modena IGP" (ABM) to evaluate their authenticity. We found that impurities in the extraction solution do not affect the ¹³C/¹²C of acetic acid and the D/H values of acetic acid are not affected under a composite NMR experiment. The standard deviation of repeatability and standard deviation of reproducibility are comparable in wine vinegar and ABM and generally lower than those quoted in the official methods. This means that the validation parameters quoted in the official methods can also be applied to the ingredients of ABM. In addition, we found no changes in the isotopic values from wine to vinegar and to ABM, and from the original must to the ABM must, providing experimental evidence that reference data from wine databanks can also be used to evaluate the authenticity of vinegar and ABM.

Esophageal Injury by Apple Cider Vinegar Tablets and Subsequent Evaluation of Products

Apple cider vinegar products are advertised in the popular press and over the Internet for treatment of a variety of conditions. After an adverse event was reported to the authors, eight apple cider vinegar tablet products were tested for pH, component acid content, and microbial growth. Considerable variability was found between the brands in tablet size, pH, component acid content, and label claims. Doubt remains as to whether apple cider vinegar was in fact an ingredient in the evaluated products. The inconsistency and inaccuracy in labeling, recommended dosages, and unsubstantiated health claims make it easy to question the quality of the products.

Optimisation of lactic acid fermentation for improved vinegar flavour during rosy vinegar brewing

BACKGROUND

Rosy vinegar is a well-known traditional Chinese product whose flavour is affected by its lactic acid content. In this study, Lactobacillus bacteria were employed to increase the content of lactic acid during the ethanol fermentation stage.

RESULTS

The optimised fermentation parameters were determined as an inoculation amount of 3% (v/v), a temperature of 30 degrees C and an initial pH value of 4.0. Fermentation under these optimal conditions resulted in an alcohol degree of 6.2% (v/v), a total acidity of 49.5 g L(-1) and a lactic acid content of 4.14 g L(-1). The content of lactic acid (4.14 g L(-1)), which approached the level achieved by solid state fermentation, was 3.56-fold higher than that in vinegar fermented without lactic acid bacteria (1.16 g L(-1)).

CONCLUSION

The results indicate that mixed fermentation with Lactobacillus plantarum and Saccharomyces cerevisiae strains greatly increases the lactic acid content and improves the flavour of rosy vinegar.

The Impact of Apple Variety and the Production Methods on the Antibacterial Activity of Vinegar Samples

Apple vinegar is a natural product widely used in food and traditional medicine as it contains many bioactive compounds. The apple variety and production methods are two factors that play a major role in determining the quality of vinegar. Therefore, this study aims to determine the quality of apple vinegar samples from different varieties (Red Delicious, Gala, Golden Delicious, and Starking Delicious) prepared by three methods using small apple pieces, apple juice, and crushed apple, through determining the physicochemical properties and antibacterial activity of these samples. The antibacterial activity was studied against five pathogenic bacteria: Staphylococcus aureus, Klebsiella pneumonia, Escherichia coli (ATB: 57), Escherichia coli (ATB: 97), and Pseudomonas aeruginosa, using two methods, disk diffusion and microdilution, for determining the minimum inhibitory concentrations and the minimum bactericidal concentrations. The results of this study showed that the lowest pH value was 3.6 for Stark Delicious, obtained by liquid fermentation, and the highest acetic acid values were 4.7 and 4% for the vinegar of Red Delicious and Golden Delicious, prepared by solid fermentation, respectively. The results of the antibacterial activity showed considerable activity of apple vinegar on the tested strains. Generally, the Staphylococcus aureus strain appears less sensitive and Pseudomonas aeruginosa seems to be very sensitive against all samples, while the other strains have distinct sensitivities depending on the variety studied and the method used. A higher antibacterial activity was found in vinegar obtained by the apple pieces method and the Red Delicious variety, with a low MIC and MBC recorded, at 1.95 and 3.90 µL/mL, respectively. This study has shown that the choice of both apple variety and production method is therefore an essential step in determining and aiming for the desired quality of apple vinegar.

[Hygienic assessment of components of smoking fume]

Analyzing the chemical composition of smoking fume has indicated that maximum allowable concentrations (MACs) have been established for 50 of 400 well-known compounds, working area MACs were standardized for 42 of the 50 compounds, the maximum single and daily average concentrations were standardized for 34 and 30 compounds, respectively. All standards were established for 25 compounds. Despite the fact that there a large list of MACs, it is difficult to calculate the objective hygienic risk of smoking smoke since 32 compounds are contained in traces. Hygienic assessment of fume discharges from the smoking chamber by taking into account their mass and MACs demonstrated that phenols, carbonyl compounds, acids, and benz(a)pyrene which should be used to work out the unified hygienic standard are of the greatest importance.