Chitosan–alginate hybrid scaffolds for bone tissue engineering

A biodegradable scaffold in tissue engineering serves as a temporary skeleton to accommodate and stimulate new tissue growth. Here we report on the development of a biodegradable porous scaffold made from naturally derived chitosan and alginate polymers with significantly improved mechanical and biological properties as compared to its chitosan counterpart. Enhanced mechanical properties were attributable to the formation of a complex structure of chitosan and alginate. Bone-forming osteoblasts readily attached to the chitosan-alginate scaffold, proliferated well, and deposited calcified matrix. The in vivo study showed that the hybrid scaffold had a high degree of tissue compatibility. Calcium deposition occurred as early as the fourth week after implantation. The chitosan-alginate scaffold can be prepared from solutions of physiological pH, which may provide a favorable environment for incorporating proteins with less risk of denaturation. Coacervation of chitosan and alginate combined with liquid-solid separation provides a scaffold with high porosity, and mechanical and biological properties suitable for rapid advancement into clinical trials.

Controlling alginate gel degradation utilizing partial oxidation and bimodal molecular weight distribution

Degradability is often a critical property of materials utilized in tissue engineering. Although alginate, a naturally derived polysaccharide, is an attractive material due to its biocompatibility and ability to form hydrogels, its slow and uncontrollable degradation can be an undesirable feature. In this study, we characterized gels formed using a combination of partial oxidation of polymer chains and a bimodal molecular weight distribution of polymer. Specifically, alginates were partially oxidized to a theoretical extent of 1% with sodium periodate, which created acetal groups susceptible to hydrolysis. The ratio of low MW to high MW alginates used to form gels was also varied, while maintaining the gel forming ability of the polymer. The rate of degradation was found to be controlled by both the oxidation and the ratio of high to low MW alginates, as monitored by the reduction of mechanical properties and corresponding number of crosslinks, dry weight loss, and molecular weight decrease. It was subsequently examined whether these modifications would lead to reduced biocompatibility by culturing C2C12 myoblast on these gels. Myoblasts adhered, proliferated, and differentiated on the modified gels at a comparable rate as those cultured on the unmodified gels. Altogether, this data indicates these hydrogels exhibit tunable degradation rates and provide a powerful material system for tissue engineering.

Induction of cytokine production from human monocytes stimulated with alginate

Alginates are polysaccharides with gel-forming properties composed of 1,4-linked beta-D-mannuronic acid (M), alpha-L-guluronic acid (G), and alternating (MG) blocks. Alginate can be used as a matrix for implanted cells in vivo. In this study, we have examined the ability of alginates and their components to stimulate human monocytes to produce tumor necrosis factor-alpha, interleukin-6, and interleukin-1. Alginates stimulated the monocytes to produce high levels of all three cytokines. Low G alginates were approximately 10 times more potent in inducing cytokine production compared with high G alginates. The M-blocks and the MG-blocks, but not the G-blocks, stimulated the cytokine production. The results demonstrate that the mannuronic acid residues are the active cytokine inducers in alginates.

Carbohydrate analysis of water-soluble uronic acid-containing polysaccharides with high-performance anion-exchange chromatography using methanolysis combined with TFA hydrolysis is superior to four other methods

Sulfuric acid hydrolysis according to the Saeman procedure, TFA hydrolysis, and methanolysis combined with TFA hydrolysis were compared for the hydrolysis of water-soluble uronic acid-containing polysaccharides originating from fungi, plants, and animals. The constituent sugar residues released were subsequently analyzed by either conventional GLC analysis of alditol acetates or high-performance anion-exchange chromatography with pulsed-amperometric detection. It was shown that TFA hydrolysis alone is not sufficient for complete hydrolysis. Sulfuric acid hydrolysis of these polysaccharides resulted in low recoveries of 6-deoxy-sugar residues. Best results were obtained by methanolysis combined with TFA hydrolysis. Methanolysis with 2 M HCl prior to TFA hydrolysis resulted in complete liberation of monosaccharides from pectic material and from most fungal and animal polysaccharides tested. Any incomplete hydrolysis could be assessed easily by HPAEC, by the detection of characteristic oligomeric products, which is difficult using alternative methods currently in use. Methanolysis followed by TFA hydrolysis of 20 micrograms water-soluble uronic acid containing polysaccharides and subsequent analysis of the liberated sugar residues by HPAEC allowed us to determine the carbohydrate composition of these polysaccharides rapidly and accurately in one assay without the need for derivatization.

Physicochemical model of alginate–poly-l-lysine microcapsules defined at the micrometric/nanometric scale using ATR-FTIR, XPS, and ToF-SIMS

Alginate-poly-L-lysine-alginate (APA) microcapsules are currently being investigated as a means to immuno-isolate transplanted cells, but their biocompatibility is limited. In this study, we verified the hypothesis that poly-L-lysine (PLL), which is immunogenic when unbound, is exposed at the APA microcapsule surface. To do so, we analysed the microcapsule membrane at the micrometric/nanometric scale using attenuated total reflectance Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and time-of-flight secondary ion mass spectrometry. The results indicate that PLL and alginate molecules interact within the membrane. PLL exists in considerable amounts near the surface, contributing to the majority of the carbon within the outermost 100 Angstroms of the membrane. PLL was also detected at the true surface (the outermost monolayer) of the microcapsules. The exposure of PLL does not appear to result from defects in the outer alginate coating. This physicochemical model of APA microcapsules could explain their immunogenicity and will play an important role in the optimization of the microcapsule design.

Dietary fibre components and pectin chemical features of peels during ripening in banana and plantain varieties

The effects of the ripeness stage of banana (Musa AAA) and plantain (Musa AAB) peels on neutral detergent fibre, acid detergent fibre, cellulose, hemicelluloses, lignin, pectin contents, and pectin chemical features were studied. Plantain peels contained a higher amount of lignin but had a lower hemicellulose content than banana peels. A sequential extraction of pectins showed that acid extraction was the most efficient to isolate banana peel pectins, whereas an ammonium oxalate extraction was more appropriate for plantain peels. In all the stages of maturation, the pectin content in banana peels was higher compared to plantain peels. Moreover, the galacturonic acid and methoxy group contents in banana peels were higher than in plantain peels. The average molecular weights of the extracted pectins were in the range of 132.6-573.8 kDa and were not dependant on peel variety, while the stage of maturation did not affect the dietary fibre yields and the composition in pectic polysaccharides in a consistent manner. This study has showed that banana peels are a potential source of dietary fibres and pectins.

Ultrasonic degradation of sweet potato pectin and its antioxidant activity

The effect of ultrasound factors (time, power, and duty cycle) on sweet potato pectin molecular weight, neutral sugar composition, pectin structure, and antioxidant activity was investigated. Sweet potato pectin dispersions (0.0025, 0.005 and 0.01g/mL) in deionized water were sonolyzed for 5, 10 and 20min to assess effect of sonication time and pectin concentration on sonolysis. For further experiments 0.0025g/mL was sonicated under varying ultrasonic power and duty cycle levels, subsequently the molecular weight, galacturonic acid content, degree of methoxylation and antioxidant activity of sonicated pectin products were investigated. Results showed that ultrasound treatment reduced pectin molecular weight, while polydispersity did not show clear trend which characterized random pectin scission, increasing duty cycle from 20% to 80% resulted in approximately threefold reduction in pectin molecular weight, increased sonication power from 100W to 400W led to significant increase in galacturonic acid content from 72.0±1.2% in native pectin to between 85.0±3.2% and 92.0±2.7%, the degree of methoxylation significantly reduced from 12.0±3.0% to between 5.25% and 6.28%, sonication led to increase in galactose and decrease in rhamnose consistent with debranching of pectin. Moreover, sonication lead to increased antioxidant capacity, both 200W and 400W sonicated pectin having higher ORAC and FRAP values, with highest pectin concentration 4mg/mL in ORAC and 0.8mg/ml in FRAP giving substantially high antioxidant activity than native and 100W treated pectin. The ORAC value of 400W sonicated pectin increased five hold above the native pectin, while it's FRAP value was almost three fold higher than native pectin. However, ultrasound did not alter pectin primary structure as showed by FTIR and HPAEC results. The results indicated that ultrasound offers effective and green process for pectin transformation and creation of antioxidant potent pectin products.

Extraction of pectins with different degrees of esterification from mulberry branch bark

Pectins were extracted from mulberry branch bark, a byproduct of the sericulture industry. A single-factor experiment was used to optimize the production conditions. Under optimal conditions, the galacturonic acid yields from bark with and without epidermis were 61.73 + or - 1.39% and 35.12 + or - 0.24%, respectively. The extracted pectins mainly consisted of galacturonic acid with a trace amount of neutral sugars, and the total galacturonic acid content in the pectins extracted from the bark without epidermis reached 85.46 + or - 2.76%. Pectins extracted from bark without epidermis had a higher degree of esterification (71.13 + or - 1.67%) than those extracted from bark with epidermis (24.27 + or - 2.89%). Pectin solution from bark without epidermis showed higher apparent viscosity, suggesting its higher gelation ability. Thus, the mulberry branch bark is a potential source of pectin with different degrees of esterification.

Metal selectivity of Sargassum spp. and their alginates in relation to their alpha-L-guluronic acid content and conformation

The discovery of a consistent and unusual enrichment in homopolymeric alpha-L-guluronic acid G-blocks in alginates extracted from a suite of Sargassum brown algae is described in this study. 1H NMR spectroscopy was used to characterize these alginates which display homopolymeric guluronic acid block (G-block) frequency values (F(GG)) between 0.37 and 0.81. The presence of these G-blocks results in an enhanced selectivity for cadmium or calcium relative to monovalent ions such as sodium and the proton as well as smaller divalent ions such as magnesium. Results of competitive exchange experiments for the Cd-Ca-alginate system yield selectivity coefficient, K*(Cd)Ca, values between 0.43 +/- 0.10 and 1.32 +/- 0.02 for a range in F(GG) of 0.23 to 0.81. In contrast to the Cd-Ca-alginate system, the Mg-Ca-alginate and Mg-Cd-alginate systems yielded maximum values of K*(Mg)Ca (18.0 +/- 1.4) and K*(Mg)Cd (16.0 +/- 0.9) for the alginates extracted from Sargassum fluitans (F(GG) = 0.81; Cuba) and Sargassum thunbergii (F(GG) = 0.75; Korea), respectively. Selectivity studies with mixed-metal pair alginate systems highlight the importance of the specific macromolecular conformation of the alginate polymer in determining metal binding behavior in multiple-metal systems. Furthermore, they demonstrate the importance of the conformation of the alginate as it occurs within the tissue of Sargassum in determining the metal binding behavior of this algal biosorbent. The unique composition of the alginates present in species of Sargassum may represent a distinct advantage over other brown algal species when considering their implementation for the strategic removal of toxic heavy metals from contaminated and industrial wastewaters.

Characteristics of Poly-l-Ornithine-coated alginate microcapsules

Poly-L-Lysine (PLL) is the most widely used biomaterial for providing perm-selectivity in alginate microcapsules for islet transplantation. We had previously reported that Poly-L-Ornithine (PLO) is less immunogenic than PLL, and in the present study, we have compared the physical characteristics of PLO- and PLL-coated hollow alginate microcapsules. Microspheres made with 1.5% alginate were divided into 2 groups that were first coated with either 0.1% PLO or PLL, followed by a second coating with 0.25% alginate. After liquefaction of the inner alginate core with sodium citrate, the microcapsules were washed with saline and used for experiments. Pore size exclusion studies were performed with FITC-labeled lectins incubated with encapsulated pig islets followed by examination for fluorescence activity. Mechanical strength was assessed by an osmotic pressure test and by 36 h of mechanical agitation of microcapsules with inert soda lime beads. The pore size exclusion limit of microcapsules after 20 min of coating was significantly smaller with PLO. While the mean +/- SEM diameter of PLL-coated microcapsules increased from 718+/-17 to 821 +/- 17 microm (p < 0.05) during 14 days incubation at 37 degrees C, the PLO group did not change in size. Also, PLL group had a higher percentage of broken capsules (52.7 +/- 4.9%) compared to 3.1 +/- 2.05% for PLO capsules (p < 0.0001,n = 6). We conclude that PLO-coated alginate microcapsules are mechanically stronger and provide better perm-selectivity than PLL-coated microcapsules.

Production of mitogen-contamination free alginates with variable ratios of mannuronic acid to guluronic acid by free flow electrophoresis

Commercial alginates consisting of variable homopolymeric regions of beta-D-mannuronic acid and alpha-L-guluronic acid, interspaced with regions of alternating blocks, are potent stimulators of macrophages and lymphocytes. Therefore, inflammatory reactions and fibrotic overgrowth of the beads result if Langerhans islets are encapsulated in raw alginate hydrogel beads (cross-linked with divalent cations). The result is random failure of the islets some time after transplantation. Analysis of raw alginates by using free flow electrophoresis demonstrated that commercial alginates contained at least 10-20 fractions (characterized by different electrophoretic mobilities) which showed mitogenic activity. These fractions could be quantitatively separated from the alginic acids by free flow electrophoresis on a preparative scale. The purified alginates cross-linked with Ca2+ ions exhibited no mitogenic reactions as proved by an in vitro assay. In addition, examination of purified Ba2+ alginate beads implanted intraperitoneally in rats or mice for three weeks showed no fibrotic overgrowth in contrast to implants made from unpurified alginate.

Contribution of alginate and levan production to biofilm formation by Pseudomonas syringae

Exopolysaccharides (EPSs) play important roles in the attachment of bacterial cells to a surface and/or in building and maintaining the three-dimensional, complex structure of bacterial biofilms. To elucidate the spatial distribution and function of the EPSs levan and alginate during biofilm formation, biofilms of Pseudomonas syringae strains with different EPS patterns were compared. The mucoid strain PG4180.muc, which produces levan and alginate, and its levan- and/or alginate-deficient derivatives all formed biofilms in the wells of microtitre plates and in flow chambers. Confocal laser scanning microscopy with fluorescently labelled lectins was applied to investigate the spatial distribution of levan and an additional as yet unknown EPS in flow-chamber biofilms. Concanavalin A (ConA) bound specifically to levan and accumulated in cell-depleted voids in the centres of microcolonies and in blebs. No binding of ConA was observed in biofilms of the levan-deficient mutants or in wild-type biofilms grown in the absence of sucrose as confirmed by an enzyme-linked lectin-sorbent assay using peroxidase-linked ConA. Time-course studies revealed that expression of the levan-forming enzyme, levansucrase, occurred mainly during early exponential growth of both planktonic and sessile cells. Thus, accumulation of levan in biofilm voids hints to a function as a nutrient storage source for later stages of biofilm development. The presence of a third EPS besides levan and alginate was indicated by binding of the lectin from Naja mossambica to a fibrous structure in biofilms of all P. syringae derivatives. Production of the as yet uncharacterized additional EPS might be more important for biofilm formation than the syntheses of levan and alginate.

Glycosaminoglycan profiles of myxomatous mitral leaflets and chordae parallel the severity of mechanical alterations

OBJECTIVES

This biochemical study compared the extracellular matrix of normal mitral valves and myxomatous mitral valves with either unileaflet prolapse (ULP) or bileaflet prolapse (BLP).

BACKGROUND

Myxomatous mitral valves are weaker and more extensible than normal valves, and myxomatous chordae are more mechanically compromised than leaflets. Despite histological evidence that glycosaminoglycans (GAGs) accumulate in myxomatous valves, previous biochemical analyses have not adequately examined the different GAG classes.

METHODS

Leaflets and chordae from myxomatous valves (n = 41 ULP, 31 BLP) and normal valves (n = 27) were dried, dissolved, and assayed for deoxyribonucleic acid, collagen, and total GAGs. Specific GAG classes were analyzed with selective enzyme digestions and fluorophore-assisted carbohydrate electrophoresis.

RESULTS

Biochemical changes were more pronounced in chordae than in leaflets. Myxomatous leaflets and chordae had 3% to 9% more water content and 30% to 150% higher GAG concentrations than normal. Collagen concentration was slightly elevated in the myxomatous valves. Chordae from ULP had 62% more GAGs than those from BLP, primarily from elevated levels of hyaluronan and chondroitin-6-sulfate.

CONCLUSIONS

The GAG classes elevated in the myxomatous chordae are associated with matrix microstructure and elastic fiber deficiencies and may influence the hydration-related "floppy" nature of these tissues. These abnormalities may be related to the reported mechanical weakness of myxomatous chordae. The biochemical differences between ULP and BLP confirm previous mechanical and echocardiographic distinctions.

The nontoxic mushroom Auricularia auricula contains a polysaccharide with anticoagulant activity mediated by antithrombin

An acidic polysaccharide with anticoagulant activity was isolated from the edible mushroom Auricularia auricula using water, alkali or acid extracts. The alkali extract showed the highest anticoagulant activity and was thereby further purified using gel filtration chromatography. Specific anticoagulant activity of the purified polysaccharide was 2 IU/mg and its average mass was approximately 160 kDa. The polysaccharide from this species of mushroom contains mainly mannose, glucose, glucuronic acid and xylose but no sulfate esters. Its anticoagulant activity was due to catalysis of thrombin inhibition by antithrombin but not by heparin cofactor II. Inhibition of Factor Xa by antithrombin was not catalyzed by the polysaccharide. The glucuronic acid residues were essential for the anticoagulant action of the mushroom polysaccharide since the activity disappeared after reduction of its carboxyl groups. In ex vivo tests using rats orally fed with the polysaccharide, we observed an inhibitory effect on platelet aggregation as observed with aspirin, a well-known antiplatelet agent. The polysaccharides from these mushrooms may constitute a new source of compounds with action on coagulation, platelet aggregation and, perhaps, on thrombosis.

Description of a new polymer-secreting bacterium from a deep-sea hydrothermal vent, Alteromonas macleodii subsp. fijiensis, and preliminary characterization of the polymer

A deep-sea, aerobic, mesophilic, heterotrophic bacterium was isolated from fluid collected near an active hydrothermal vent. On the basis of phenotypic and phylogenetic analyses and DNA-DNA relatedness, strain ST716 could be assigned to the species Alteromonas macleodii as a new subspecies. This bacterium secreted an unusual high-molecular-weight polysaccharide in the presence of glucose in batch cultures. The viscosity of this exopolysaccharide is of the same order of magnitude as that of xanthan, another bacterial polysaccharide of industrial interest. This polysaccharide, produced during the stationary phase, contained glucose, mannose, pyruvated mannose, and galactose along with galacturonic acid and glucuronic acid.

Characterization of the alginates from algae harvested at the Egyptian Red Sea coast

The alginates from five species of brown algae from the Egyptian Red Sea coast, namely: Cystoseira trinode, Cystoseira myrica, Sargassum dentifolium, Sargassum asperifolium, and Sargassum latifolium, were isolated and their compositions and structures studied by 1H NMR spectroscopy. All the alginates studied contain more guluronic acid (G) than mannuronic acid (M) and have a homopolymeric block-type structure (eta<1). The intrinsic viscosity of the alginate samples range from 8.6 to 15.2 and the gel strength ranges from 10.97 to 15.51. The constitutional G- and M-blocks of alginates from two different species (C. trinode and S. latifolium) were separated after partial acid hydrolysis. The 1H NMR spectral data of the blocks GG and MM obtained by chemical fractionation were compared with those of polymeric alginates. The monomeric uronic acids were separated by complete acid hydrolysis of S. asperifolium alginate and the G and M monomers were characterized by 1H, 13C NMR spectroscopy as well as by paper electrophoresis.

A longitudinal study of the matrix changes induced in the intervertebral disc by surgical damage to the annulus fibrosus

A 5 x 5-mm anterolateral incision was made in the annulus fibrosus (AF) of lumbar discs of 16 sheep; four animals of similar age not operated on were used as controls. The experimental animals were sacrificed 2, 4, 6, 8, 12, and 18 months postoperatively (PO), and the incised and adjacent lumbar discs were collected. Discs were dissected into four zones: AF (zones 1 and 2) and nucleus pulposus (NP) (zones 3 and 4) corresponding to the half of the AF in which the cut was made and its opposite half, and the complementary halves of the NP. Each zone was analyzed for moisture, proteoglycan (PG), collagen, and noncollagenous protein (NCP) content. The PG extractability, aggregation, and hydrodynamic size were also examined. The NP of injured discs showed a significant loss of PGs and collagen 8 months PO, but NCP levels increased. In the incised discs, PG aggregation initially declined but recovered to within control values 6-8 months PO. The NP of discs adjacent to the incised disc also showed time-dependent changes in matrix components that included loss of collagen and PG; however, the AF matrix remained essentially uneffected. Double immunodiffusion studies indicated that a sizeable proportion of the NCPs present in the injured discs (but not the adjacent lumbar discs) were derived from serum.

Characterization of five type II arabinogalactan-protein fractions from red wine of increasing uronic acid content

Five arabinogalactan-protein conjugates (AGP) were separated from red wine by two successive anion-exchange chromatography steps and further purified to apparent homogeneity by affinity and size-exclusion chromatography. Together they represent more than 40% of total wine polysaccharides, confirming the abundance of AGPs in red wine. The five purified fractions had a common arabinogalactan core with characteristics typical of wine type II AGPs, but differed mainly in their uronic acid content, as evidenced by differences in the strength of their binding to the anion-exchanger. Their uronic acid content and glycosidic linkage composition revealed that the three less acidic AGPs contained from 3 to 7% glucuronic acid, half in terminal non-reducing positions and half in terminal Rhap-(1-->4)-Glc pA-(1-->sequences. The two more acidic AGP-containing fractions contained both glucuronic (6.1 and 13.3%, respectively) and galacturonic (1.9 and 2.3%, respectively) acid in association with 2- and 2,4-linked rhamnose, indicating the presence of AG-rhamnogalacturonan fragments.

The proteoglycan content and the axial periodicity of collagen in tendon

The glycosaminoglycan content and the axial periodicity of collagen was determined in various regions of the rabbit flexor digitorum profundus tendon. This tendon, which passes from the calf to the toes round the inner side of the ankle, contains a thickened sesamoid-like pad where it is subjected to friction and pressure. Other regions of the tendon are subject only to longitudinal tension. In tensional areas the axial periodicity of collagen was of the order of 62 nm and the tissue contained less than 0.2% proteoglycan on a dry weight basis. In the sesamoid-like region, however, the axial periodicity was a significant 13-15% less, and the proteoglycan constituted about 3.5% of the dry weight. Also, in the tensional areas the predominant glycosaminoglycan was dermatan sulphate, whereas in the sesamoid the predominant glycosaminoglycan was chondroitin sulphate. The possible interrelationships between collagen axial peroidicity and proteoglycan content in this tissue are discussed.

Quantification of the amount of galacturonic acid residues in blocksequences in pectin homogalacturonan by enzymatic fingerprinting with exo- and endo-polygalacturonase II from Aspergillus niger

A method to determine the amount of galacturonic acid in blocksequence (BS) in pectin homogalacturonan (HG) is described. The method is based on a combination of endopolygalacturonase II (endo-PG II) and exopolygalacturonase (exo-PG) digestion followed by quantification of the liberated galacturonic acid monomer. The amount of monomers released is directly related to the amount of non-esterified galacturonic acid units located between two other non-esterified galacturonic acids units on the HG chain. The amount released for exo-PG digestion only corresponds to the BS located at the non-reducing end of the polymer. The difference between total- and exo-BS was calculated to be the amount of endo-BS located either within or on the reducing end of the HG. Three series of model pectins obtained by de-esterification of a high-ester pectin with either plant pectin methyl-esterase (p-PME, P-series), fungal pectin methyl-esterase (f-PME, F-series) and chemical de-esterification using base (B-series) were analysed and compared with a fully de-esterified pectic acid sample obtained from the same raw material. Clear differences for the increase of the amounts of blocksequence could be seen between de-esterification of the P- and F-series samples supporting a blockwise and a homogenous de-esterification mechanism, respectively. f-PME and base treatment showed only minor differences in the increase of galacturonic acid units in BS, despite differences seen in their methyl-esterification pattern. Differences between the amounts of galacturonic acid located in exo- and endo-BS, provided evidence for the need of a certain start side or blocklength for p-PME to de-esterify blockwise.

A galacturonic acid-containing xyloglucan is involved in Arabidopsis root hair tip growth

Root hairs provide a model system to study plant cell growth, yet little is known about the polysaccharide compositions of their walls or the role of these polysaccharides in wall expansion. We report that Arabidopsis thaliana root hair walls contain a previously unidentified xyloglucan that is composed of both neutral and galacturonic acid-containing subunits, the latter containing the β-D-galactosyluronic acid-(1→2)-α-D-xylosyl-(1→ and/or α-L-fucosyl-(1→2)-β-D-galactosyluronic acid-(1→2)-α-D-xylosyl-(1→) side chains. Arabidopsis mutants lacking root hairs have no acidic xyloglucan. A loss-of-function mutation in At1g63450, a root hair-specific gene encoding a family GT47 glycosyltransferase, results in the synthesis of xyloglucan that lacks galacturonic acid. The root hairs of this mutant are shorter than those of the wild type. This mutant phenotype and the absence of galacturonic acid in the root xyloglucan are complemented by At1g63450. The leaf and stem cell walls of wild-type Arabidopsis contain no acidic xyloglucan. However, overexpression of At1g63450 led to the synthesis of galacturonic acid-containing xyloglucan in these tissues. We propose that At1g63450 encodes XYLOGLUCAN-SPECIFIC GALACTURONOSYLTRANSFERASE1, which catalyzes the formation of the galactosyluronic acid-(1→2)-α-D-xylopyranosyl linkage and that the acidic xyloglucan is present only in root hair cell walls. The role of the acidic xyloglucan in root hair tip growth is discussed.

A colorimetric method for the quantitation of uronic acids and a specific assay for galacturonic acid

A method of quantitating uronic acids and uronic acids from pectin in particular is described. The method uses carbazole in 80% sulfuric acid with borate ions added. The assay is carried out at 60 degrees C. This assay has some cross reactivity with aldose sugars and must be timed precisely. A further method that is specific for galacturonic acid is also described. This method uses concentrated sulfuric acid and carbazole only. Of the biological substances tested, only formaldehyde and glyceraldehyde showed a reactivity of more than 10% that of galacturonic acid on a weight to weight basis.

N-acetylgalactosamine-6-sulfate sulfatase in man. Absence of the enzyme in Morquio disease

Human N-acetylgalactosamine-6-sulfate sulfatase (6-sulfatase) activity is measured by using as a substrate a sulfated tetrasaccharide obtained by digesting purified chondroitin-6-sulfate (C-6-S) with testicular hyaluronidase. The amount of inorganic sulfate released is measured turbidimetrically. The enzyme from human kidney has a pH optimum of 4.8; its activity is augmented by low levels of NaCl and inhibited by phosphate and high levels of NaCl. Free glucuronate, acetylgalactosamine, inorganic sulfate, polymeric C-6-S, or tetrasaccharide obtained from chondroitin-4-sulfate do not affect the enzyme activity. The method may be used for the diagnosis of Morquio disease since extracts of Morquio fibroblasts are devoid of 6-sulfatase activity.

A xylogalacturonan epitope is specifically associated with plant cell detachment

A monoclonal antibody (LM8) was generated with specificity for xyloglacturonan (XGA) isolated from pea (Pisum sativum L.) testae. Characterization of the LM8 epitope indicates that it is a region of XGA that is highly substituted with xylose. Immunocytochemical analysis indicates that this epitope is restricted to loosely attached inner parenchyma cells at the inner face of the pea testa and does not occur in other cells of the testa. Elsewhere in the pea seedling, the LM8 epitope was found only in association with root cap cell development at the root apex. Furthermore, the LM8 epitope is specifically associated with root cap cells in a range of angiosperm species. In embryogenic carrot suspension cell cultures the epitope is abundant at the surface of cell walls of loosely attached cells in both induced and non-induced cultures. The LM8 epitope is the first cell wall epitope to be identified that is specifically associated with a plant cell separation process that results in complete cell detachment.