Determination of isoxsuprine hydrochloride by sequential injection visible spectrophotometry

An automated sequential injection (SI) spectrophotometric method for the determination of isoxsuprine hydrochloride is described. The method is based on the condensation of aminoantipyrine with phenols (isoxsuprine hydrochloride) in the presence of an alkaline oxidizing agent (potassium hexacyanoferrate) to yield a pink colored product, the absorbance of which is monitored at 507 nm. Chemical as well as physical SI parameters that affect the signal response have been optimized in order to get better sensitivity, higher sampling rate and better reagent economy. Using the optimized aforesaid parameters, a linear relationship between the relative peak height and concentration was obtained in the range 1-60 mg l-1. The detection limit (as 3sigma value) was 0.3 mg l-1 and precision was 1.4% and 1.6% at 5 and 10 mg l-1, respectively. As compared to previous reports, wide linear range, low detection limit, and highly economical reagent consumption are the advantages of this automated method.

Determination of beta-agonist residues in bovine urine using liquid chromatography-tandem mass spectrometry

A multiresidue method was developed and validated to screen bovine urine samples for 10 beta-2-adrenergic agonistic drugs--brombuterol, cimaterol, clenbuterol, clenpenterol, isoxsuprine, mabuterol, ractopamine, ritodrine, salbutamol, and tulobuterol--at the 2 microg/L level. The method is also quantitative in the range of 1 to 4 microg/L for all analytes except salbutamol. The procedure uses enzymatic digestion, liquid-liquid extraction, and cleanup on solid-phase extraction columns, followed by detection using a liquid chromatograph-tandem quadrupole mass spectrometer operated in the positive-ion atmospheric pressure chemical ionization multiple-reaction monitoring mode. Method validation included assessment of recoveries, repeatabilities, linearity of responses, decision limits, and detection capabilities. Overall average recoveries ranged from 70-91%; recoveries were generally lower for salbutamol. The decision limits ranged from 0.4-1.0 microg/L, and detection capabilities from 0.6-1.7 microg/L.

A GC-MS Method for the Determination of Isoxsuprine in Biological Fluids of the Horse Utilizing Electron Impact Ionization*

Isoxsuprine is used to treat navicular disease and other lower-limb problems in the horse. Isoxsuprine is regulated as a class 4 compound by the Association of Racing Commissioners, International (ARCI) and, thus, requires regulatory monitoring. A gas chromatography-mass spectrometry method utilizing electron impact ionization was developed and validated for the quantitation of isoxsuprine in equine plasma or equine urine. The method utilized robotic solid-phase extraction and tri-methyl silyl ether products of derivatization. Products were bis-trimethylsilyl (TMS) isoxsuprine and tris-TMS ritodrine, which released intense quantifier ions m/z 178 for isoxsuprine and m/z 236 for ritodrine that were products of C-C cleavage. To our knowledge, this procedure is faster and more sensitive than other methods in the literature. Concentrations in urine and plasma of isoxsuprine were determined from a calibrator curve that was generated along with unknowns. Ritodrine was used as an internal standard and was, therefore, present in all samples, standards, and blanks. Validation data was also collected. The limit of detection of isoxsuprine in plasma was determined to be 2 ng/mL, the limit of quantitation of isoxsuprine in plasma was determined to be < 5 ng/mL. The mean coefficient of determination for the calibrator curves for plasma was 0.9925 +/- 0.0052 and for calibrator curves for urine 0.9904 +/- 0.0075. The recovery efficiencies at concentrations of 50, 200, and 300 ng/mL were 76%, 73%, and 76%, respectively, in plasma and 92%, 89%, and 91% in urine.

Fluorimetric determination of isoxsuprine hydrochloride in pharmaceuticals and biological fluids

Two simple and highly sensitive fluorimetric methods have been developed for the determination of isoxsuprine hydrochloride in bulk, in dosage forms and in biological fluids. The first method involves the direct measurement of the native fluorescence of the drug in the concentration range 0.4-4.0 microg ml(-1), the second method is based on the oxidation of isoxsuprine HCl with cerium(IV) followed by fluorimetric measurement in the concentration range 0.02-0.2 microg ml(-1). The average % found were 99.9 +/- 0.78 and 100.0 +/- 0.62 for the two methods, respectively. The minimum detectability (3 S(B)) were 0.11 and 0.007 microg ml(-1) for the two methods, respectively. The methods results showed insignificant difference with those of the official method.

Determination of phenolic sympathomimetic drugs in pharmaceutical samples and biological fluids by flow-injection chemiluminescence

A rapid and highly sensitive flow-injection chemiluminometric method was developed for determination of 3 sympathomimetic drugs, namely, etilefrine hydrochloride, isoxsuprine hydrochloride, and prenalterol hydrochloride. The method is based on chemiluminescence induced by oxidation of drugs with acidified potassium permanganate in the presence of formic acid as a carrier. The calibration graphs were linear over the concentration ranges 0.2-9, 0.2-12.5, and 0.025-1.25 microg/mL for the 3 compounds, respectively. The method was applied successfully in determining the drugs in dosage forms and in biological fluids. A proposal for the reaction pathway is suggested.

Spectrophotometric determination of ritodrine and isoxsuprine hydrochlorides using 4-aminoantipyrine

A simple, accurate, and rapid method for the quantitative determination of ritodrine hydrochloride (RTH) and isoxsuprine hydrochloride (ISH) in both pure and dosage forms, is described. The method is based on the development of pink colored product as a result of the condensation of 4-aminoantipyrine with phenols in the presence of an alkaline oxidizing agent. The resulting products are measured at 510 nm for both drugs, with molar absorptivities of 0.98 x 10(4) and 1.20 x 10(4) L/mol x cm for RTH and ISH, respectively. A study of the effect of commonly associated excipients revealed that they did not cause interference.

Use of ion-selective electrodes in kinetic flow injection: determination of phenolic and hydrazino drugs with 1-fluoro-2,4-dinitrobenzene using a fluoride-selective electrode

A flow injection (FI) kinetic potentiometric method for the determination of phenolic (acetaminophen and isoxsuprine) and hydrazino (isoniazid) drugs is described. This work shows the usefulness of ion-selective electrodes as detectors in FI systems, not only for direct ion determination but also in routine kinetic analysis. The method is based on the reaction of 1-fluoro-2,4-dinitrobenzene (FDNB) with the analytes in a weakly alkaline medium, which proceeds through the liberation of fluoride from the reagent. The slow reactions with phenols are catalysed by micelles of cetyltrimethylammonium bromide. The reaction rate is monitored with a fluoride-selective electrode in a wall-jet configuration and is used to construct a calibration graph of antilog(delta E/S)-1 versus c (where E = potential, s = slope of the electrode and c = concentration), using the fixed-time approach. The response time and the long-term stability of the electrode were found to be adequate for such kinetic determinations. The proposed method overcomes problems associated with end-point spectrophotometric methods using FDNB and allows measurements in highly coloured or turbid solutions. The optimized method has a linear concentration range of 1 x 10(-4)-50 x 10(-4) mol dm-3, a measurement throughput of 20 or 40 per hour and the precision ranges from 1.8 to 3.6% relative standard deviation (n = 3). Results obtained for commercial pharmaceutical formulations compare favourably with those given by reference methods.

Automated flow injection spectrophotometric determination of para- and meta-substituted phenols of pharmaceutical interest based on their oxidative condensation with 1-nitroso-2-naphthol

The reaction of para- and meta-substituted phenols with 1-nitroso-2-naphthol in the presence of either CeIV or PbIV as an oxidant has been used to develop a fast automated flow injection (Fl) method. A stopped-flow kinetic study of the reaction revealed the optimum conditions for the proposed Fl method. Acetaminophen, amoxicillin, cefadroxil, isoxsuprine, nylidrin, propylparaben, tyrosine and metaraminol can be determined in the range 1 x 10(-4)-8 x 10(-4) M, with relative standard deviations of less than 2%, and a measurement throughput of 40 measurements h-1. The method was evaluated by performing interference studies of common excipients and assaying commercial formulations of acetaminophen and isoxsuprine. The results were in good agreement with those obtained by acceptable spectrophotometric or high-performance liquid chromatographic methods (mean difference 2.1%). The high sample throughput of the Fl method was exploited by performing a content uniformity test of isoxsuprine tablets.

High-performance liquid chromatography of two peripheral vasodilators, nylidrin hydrochloride and isoxsuprine hydrochloride, in pharmaceutical dosage forms

A reliable and selective high-pressure liquid chromatographic (HPLC) procedure for the quantitative determination of nylidrin hydrochloride or isoxsuprine hydrochloride in pharmaceutical dosage forms is described. The specificity of the stability-indicating HPLC procedure is presented for nylidrin hydrochloride.