Physiological and physicochemical controls on foliar volatile organic compound emissions

Plant leaves emit a broad spectrum of organic compounds that typically play multiple roles in plant protection. Furthermore, most of these compounds actively participate in tropospheric chemistry. There has been rapid progress in understanding how the emission of volatiles is regulated, mostly focusing on the biochemical controls over compound production. However, physicochemical characteristics such as low volatility or diffusion can also control the emissions and interact with physiological limitations. In particular, non-specific leaf storage of less volatile compounds smooths the emission responses to fluctuating environmental conditions, and diffusion through stomata leads to conspicuous emission bursts after stomatal opening and modifications of diurnal emission time courses. Because natural conditions always fluctuate, both physiological and physicochemical controls exert a major influence over plant volatile emissions.

Molecular interaction between Methylobacterium extorquens and seedlings: growth promotion, methanol consumption, and localization of the methanol emission site

Four Methylobacterium extorquens strains were isolated from strawberry (Fragaria x ananassa cv. Elsanta) leaves, and one strain, called ME4, was tested for its ability to promote the growth of various plant seedlings. Seedling weight and shoot length of Nicotiana tabacum, Lycopersicon esculentum, Sinapis alba, and Fragaria vesca increased significantly in the presence of the pink-pigmented facultative methylotroph (PPFM), but the germination behaviour of seeds from six other plants was not affected. The cell-free supernatant of the bacterial culture stimulated germination, suggesting the production of a growth-promoting agent by the methylotroph. Methanol emitted from N. tabacum seedlings, as determined by proton-transfer-reaction mass spectrometry (PTR-MS), ranged from 0.4 to 0.7 ppbv (parts per billion by volume), while significantly lower levels (0.005 to 0.01 ppbv) of the volatile alcohol were measured when the seedlings were co-cultivated with M. extorquens ME4, demonstrating the consumption of the gaseous methanol by the bacteria. Additionally, by using cells of the methylotrophic yeast Pichia pastoris transformed with the pPICHS/GFP vector harbouring a methanol-sensitive promoter in combination with the green fluorescence protein (GFP) reporter gene, stomata were identified as the main source of the methanol emission on tobacco cotyledons. Methylobacterium extorquens strains can nourish themselves using the methanol released by the stomata and release an agent promoting the growth of the seedlings of some crop plants.

Air pollution: sensitive detection of ten pollutant gases by carbon monoxide and carbon dioxide lasers

Detection sensitivities of a few parts per billion for ten gaseous pollutants have been evaluated by measuring the strength of the absorption of infrared radiation from carbon monoxide and carbon dioxide lasers. Ethylene concentrations as small as 5 parts per billion have been detected in air. The measured absorption strengths indicate that in mixtures of pollutants, such as nitrogen dioxide and water vapor, the sensitivity is reduced by overlapping absorption bands. However, calculations indicate that it should be possible to detect nitrogen dioxide concentrations of 0.01 part per million in the presence of water vapor concentrations of 105 parts per million.

Assessment of the UV/chlorine process as an advanced oxidation process

Several organic compounds were used as radical scavengers/reagents to investigate the possibility of the UV/chlorine process being used as an advanced oxidation process (AOP) in the treatment of drinking water and wastewater. The UV/H(2)O(2) process was selected as a reference, so that the results from the UV/chlorine process could be compared with those of the UV/H(2)O(2) process. Methanol was added to active chlorine solutions at both pH 5 and 10 and into hydrogen peroxide samples. The photodegradation quantum yields and the OH radical production yield factors, which are significant in evaluating AOPs, were calculated for both the UV/chlorine and the UV/H(2)O(2) processes. The yield factor for the UV/chlorine process at pH 5 was 0.46 ± 0.09, which is much lower than that of the UV/H(2)O(2) process, which reached 0.85 ± 0.04. In addition to methanol, para-chlorobenzoic acid (pCBA) and cyclohexanoic acid (CHA) were added to active chlorine solutions and to H(2)O(2) solutions, to evaluate the efficiencies of oxidizing these organic compounds. The specific first-order reaction rate constants for the oxidation of pCBA and CHA, using the UV/chlorine process, were lower than those found using the UV/H(2)O(2) process.

Odor compounds from different sources of landfill: characterization and source identification

This study investigated the odor compounds from different areas in a landfill site, which included the municipal solid waste (MSW)-related area, the leachate-related area and the sludge-related area. Nine sampling points were placed and 35 types of odorous substances were measured and quantified from these grabbed samples. The results showed that the main odorous substances emitted from landfill site were styrene, toluene, xylene, acetone, methanol, n-butanone, n-butylaldehyde, acetic acid, dimethyl sulfide, dimethyl disulfide and ammonia. In the MSW-related area, the highest concentrations of oxygenated compounds were observed at the gas extraction wells (GW), while sulfur compounds were rare. Ammonia in the sludge-related area was very abundant. Sludge discharge area (SD1) and sludge disposal work place (SD2) were representative points of pre- and post-drying, in which the characterizations of the emitted odorous gas were different. After chemical drying, the concentration of ammonia increased, whereas those of volatile fatty acids and sulfur compounds decreased. In the leachate-related area, relatively low concentrations of all those odorants were detected in leachate storage pool (LS), which may be due to the enclosure operation of the leachate storage pool. Using principal components analysis and cluster analysis, GW, SD1 and SD2 were distinguished from the other sampling points. The typical odorants in GW were acetaldehyde, ethyl benzene, xylene, methylamine and dimethyl formamide. The typical odorants in SD1 were methyl mercaptan, valeric acid and isovaleric acid, while those in SD2 were carbon disulfide, acetone, 3-pentanone, methanol and trimethylamine. The typical odorants in other sampling points were hydrogen sulfide, n-butylaldehyde and acetic acid.

Optimization of the high-level production of Rhizopus oryzae lipase in Pichia pastoris

The lipases of the Rhizopus species family are important and versatile enzymes that are mainly used in fat and oil modification due to their strong 1,3-regiospecificity. Inexpensive synthetic medium was used for the production of Rhizopus oryzae lipase in the methylotrophic yeast Pichia pastoris. Methanol accumulation inside the bioreactor has previously been shown to negatively influence the production level. Three different methanol fed-batch strategies for maintaining the methanol concentration within optimal limits have been assayed in high-density cultures. One methanol feeding strategy, which is based on the monitoring of the methanol concentration by gas chromatography, resulted in a 2.5-fold higher productivity compared to an initial cultivation, where the feeding rate was adjusted according to the dissolved oxygen concentration (DO) in the supernatant. Finally, productivity could be further increased by introducing a transition phase that involved the simultaneous feeding of glycerol and methanol followed by a single methanol feed. This optimized strategy resulted in the highest productivity (12888 U l(-1) h(-1)), which is 13.6-fold higher than the DO-based strategy.

Measurement of pectin methylation in plant cell walls

A procedure was developed to measure the degree of pectin methylation in small samples of isolated cell walls from nonlignified plant tissues or pectin solutions. Galacturonic acid was determined colorimetrically with the 3,5-dimethylphenol reagent. Methylation was measured by base hydrolysis of galacturonic acid methyl esters, followed by gas chromatographic determination of released methanol. Estimates of the precision of analysis of pectin and cell wall samples were made. The coefficient of variation for estimates of the pectin esterification in cell walls isolated from 10-g samples of cucumber tissue ranged from 7.7 to 13.2%.

Comparison of three colorimetric reagents in the determination of methanol with alcohol oxidase. Application to the assay of pectin methylesterase

Three colorimetric reagents for the determination of formaldehyde, the Nash reagent (ammonia plus acetylacetone), Purpald (4-amino-3-hydrazino-5-mercapto-1,2,4-triazole), and N-methylbenzothiazolinone-2-hydrazone (MBTH), were compared for the determination of methanol when used in conjunction with alcohol oxidase. The combination of alcohol oxidase plus the commonly used Nash reagent was specific for methanol versus ethanol, but had the lowest sensitivity of the three reagents tested. Substituting Purpald for the Nash reagent increased the sensitivity 3-fold while still maintaining a high (59-fold) selectivity for methanol versus ethanol. Using MBTH increased the sensitivity still further, but with a loss of the selectivity toward methanol. Since MBTH reacted with aldehydes under neutral conditions, it could be included along with the alcohol oxidase to act as an aldehyde trap. This prevented further oxidation reactions by alcohol oxidase and allowed for extended incubations. A procedure for assaying low levels of pectin methylesterase activity that relies on this trapping ability is described. In addition, alcohol oxidase plus Purpald is shown to be a simple and sensitive way to measure the methanol released from plant material following the thermal activation of endogenous pectin methylesterase.

Optimal coating selection for the analysis of organic vapor mixtures with polymer-coated surface acoustic wave sensor arrays

A method for determining the optimal set of polymer sensor coatings to include in a surface acoustic wave (SAW) sensor array for the analysis of organic vapors is described. The method combines an extended disjoint principal components regression (EDPCR) pattern recognition analysis with Monte Carlo simulations of sensor responses to rank the various possible coating selections and to estimate the ability of the sensor array to identify any set of vapor analytes. A data base consisting of the calibrated responses of 10 polymer-coated SAW sensors to each of six organic solvent vapors from three chemical classes was generated to demonstrate the method. Responses to the individual vapors were linear over the concentration ranges examined, and coatings were stable over several months of operation. Responses to binary mixtures were additive functions of the individual component responses, even for vapors capable of strong hydrogen bonding. The EDPCR-Monte Carlo method was used to select the four-sensor array that provided the least error in identifying the six vapors, whether present individually or in binary mixtures. The predicted rate of vapor identification (87%) was experimentally verified, and the vapor concentrations were estimated within 10% of experimental values in most cases. The majority of errors in identification occurred when an individual vapor could not be differentiated from a mixture of the same vapor with a much lower concentration of a second component. The selection of optimal coating sets for several ternary vapor mixtures is also examined. Results demonstrate the capabilities of polymer-coated SAW sensor arrays for analyzing of solvent vapor mixtures and the advantages of the EDPCR-Monte Carlo method for predicting and optimizing performance.

Multianalyte Chemical Identification and Quantitation Using a Single Radio Frequency Identification Sensor

We demonstrate an approach for multianalyte chemical identification and quantitation using a single conventional radio frequency identification (RFID) tag that has been adapted for chemical sensing. Unlike other approaches of using RFID sensors, where a special tag should be designed at a much higher cost, we utilize a conventional RFID tag and coat it with a chemically sensitive film. As an example, we demonstrate detection of several vapors of industrial, health, law enforcement, and security interest (ethanol, methanol, acetonitrile, water vapors) with a single 13.56-MHz RFID tag coated with a solid polymer electrolyte sensing film. By measuring simultaneously several parameters of the complex impedance from such an RFID sensor and applying multivariate statistical analysis methods, we were able to identify and quantify several vapors of interest. With a careful selection of the sensing film and measurement conditions, we achieved parts-per-billion vapor detection limits in air. These RFID sensors are very attractive as ubiquitous multianalyte distributed sensor networks.

Characterization of crude glycerol from biodiesel plants

Characterization of crude glycerol is very important to its value-added conversion. In this study, the physical and chemical properties of five biodiesel-derived crude glycerol samples were determined. Three methods, including iodometric-periodic acid method, high performance liquid chromatography (HPLC), and gas chromatography (GC), were shown to be suitable for the determination of glycerol content in crude glycerol. The compositional analysis of crude glycerol was successfully achieved by crude glycerol fractionation and characterization of the obtained fractions (aqueous and organic) using titrimetric, HPLC, and GC analyses. The aqueous fraction consisted mainly of glycerol, methanol, and water, while the organic fraction contained fatty acid methyl esters (FAMEs), free fatty acids (FFAs), and glycerides. Despite the wide variations in the proportion of their components, all raw crude glycerol samples were shown to contain glycerol, soap, methanol, FAMEs, water, glycerides, FFAs, and ash.

Defining a tolerable concentration of methanol in alcoholic drinks

Methanol, a potent toxicant in humans, occurs naturally at a low level in most alcoholic beverages without causing harm. However, illicit drinks made from "industrial methylated spirits" [5% (v/v) methanol:95% (v/v) ethanol] can cause severe and even fatal illness. Since documentation of a no-adverse-effect level for methanol is nonexistent in the literature a key question, from the public health perspective, is what is the maximum concentration of methanol in an alcoholic drink that an adult human could consume without risking toxicity due to its methanol content? Published information about methanol-intoxicated patients is reviewed and combined with findings in studies in volunteers given small doses of methanol, as well as occupational exposure limits (OELs), to indicate a tolerable ("safe") daily dose of methanol in an adult as 2 g and a toxic dose as 8 g. The simultaneous ingestion of ethanol has no appreciable effect on the proposed "safe" and "toxic" doses when considering exposure over several hours. Thus, assuming that an adult consumes 4 x 25-ml standard measures of a drink containing 40% alcohol by volume over a period of 2 h, the maximum tolerable concentration (MTC) of methanol in such a drink would be 2% (v/v) by volume. However, this value only allows a safety factor of 4 to cover variation in the volume consumed and for the effects of malnutrition (i.e., folate deficiency), ill health and other personal factors (i.e., ethnicity). In contrast, the current EU general limit for naturally occurring methanol of 10 g methanol/l ethanol [which equates to 0.4% (v/v) methanol at 40% alcohol] provides a greater margin of safety.

Highly selective gas sensor arrays based on thermally reduced graphene oxide

The electrical properties of reduced graphene oxide (rGO) have been previously shown to be very sensitive to surface adsorbates, thus making rGO a very promising platform for highly sensitive gas sensors. However, poor selectivity of rGO-based gas sensors remains a major problem for their practical use. In this paper, we address the selectivity problem by employing an array of rGO-based integrated sensors instead of focusing on the performance of a single sensing element. Each rGO-based device in such an array has a unique sensor response due to the irregular structure of rGO films at different levels of organization, ranging from nanoscale to macroscale. The resulting rGO-based gas sensing system could reliably recognize analytes of nearly the same chemical nature. In our experiments rGO-based sensor arrays demonstrated a high selectivity that was sufficient to discriminate between different alcohols, such as methanol, ethanol and isopropanol, at a 100% success rate. We also discuss a possible sensing mechanism that provides the basis for analyte differentiation.

A longitudinal study of methanol in the exhaled breath of 30 healthy volunteers using selected ion flow tube mass spectrometry, SIFT-MS

Selected ion flow tube mass spectrometry, SIFT-MS, has been used to monitor the volatile compounds in the exhaled breath of 30 volunteers (19 male, 11 female) over a six-month period. Volunteers provided breath samples each week between 8:45 am and 1 pm (before lunch), and the concentrations of several trace compounds were obtained. In this paper the focus is on methanol in breath. The median methanol level determined using the H(3)O(+) precursor ions for all samples was 461 parts-per-billion (ppb), the concentrations for all the samples ranging from 32 to 1684 ppb. The distribution of breath methanol concentration is seen to be log-normal for this healthy population; the geometric mean was 450 ppb, close to the median value, and the multiplicative (geometric) standard deviation was 1.62. Breath methanol is not correlated with age, breath ethanol or ethanol consumed in the previous 24 h, but there was an inverse correlation with body mass index (BMI) for the cohort of volunteers recruited for this study. Observed breath methanol levels are well compatible with the previously published blood methanol levels. Some tentative suggestions are made concerning the origin of endogenous methanol.

Metal chelate-interaction chromatography of proteins with iminodiacetic acid-bonded stationary phases on silica support

An iminodiacetic acid (IDA)-bonded stationary phase on a wide-pore microparticulate silica support was used for the chromatography of amino acids and proteins at pH 5.0 and 6.0. Without chelated metal the retention behavior of the stationary phase parallelled that of other silica-bound cation exchangers used in high-performance liquid chromatography of proteins. In metal chelate-interaction chromatography (MCIC) with IDA, chelated by Cu(II), Zn(II), Ni(II), Fe(II), or Fe(III), amino acids were most strongly retained on Cu(II)-IDA, whereas all metal chelates separated the proteins under investigation but with different selectivity. The effect of salt concentration in the eluent on protein retention was investigated and the pertinent electrostatic and hydrophobic interaction parameters were evaluated. The proteins were separated by MCIC with increasing salt gradient and, using the same column, by hydrophobic-interaction chromatography with decreasing salt gradient. In MCIC the addition of methanol to the mobile phase had disparate effect on protein retention, whereas addition of histidine or glycine, which acted as competing ligands, reduced the retention.

Kinetics studies of synthesis of biodiesel from waste frying oil using a heterogeneous catalyst derived from snail shell

Waste frying oil was used to produce biodiesel using calcined snail shell as a heterogeneous base catalyst. Trans esterification reactions were carried out and the yield and conversion of the product were optimized by varying the methanol to oil molar ratio, catalyst amount, reaction temperature, and time. A biodiesel conversion of 99.58% was obtained with a yield of 87.28%. The reaction followed first order kinetics. The activation energy (E(A)) was 79kJ/mol and the frequency factor (A) was 2.98×10(10)min(-1). The fuel properties of the biodiesel were measured according to ASTM D 6751 and found to be within the specifications. Snail shell is a novel source for the production of heterogeneous base catalyst that can be successfully utilized for synthesis of biodiesel of high purity.

Reagentless biosensors based on self-deposited redox polyelectrolyte-oxidoreductases architectures

Reagentless fructose and alcohol biosensors have been produced with a versatile enzyme immobilisation technique which mimics natural interactions and flexibility of living systems. The electrode architecture is built up on electrostatic interactions by the sequential adsorption of redox polyelectrolytes and redox enzymes giving rise to the efficient transformation of substrate fluxes into electrocatalytic currents. All investigated multilayer structures were self-deposited on 3-mercapto-1-propanesulfonic acid monolayers self-assembled on gold electrodes. Fructose dehydrogenase, horseradish peroxidase (HRP) and the couple HRP-alcohol oxidase were electrochemically connected with a cationic poly[(vinylpyridine)Os(bpy)2Cl] redox polymer (RP) interface in a layer-by-layer self-deposited architecture. The dependence of the distance on the electrochemical response of this interface was also studied showing a clear decrease in the Faradaic current when the distance to the electrode surface was increased. The sensitivities obtained for each biosensor were 19.3, 58.1 and 10.6 mA M(-1) cm(-1) for fructose, H2O2 and methanol, respectively. The sensitivity values can be easily controlled by a rational deposition and manipulation of the charge in the catalytic layers. The electrostatic assembly of the electrochemical interface and the catalytic layers resulted in integrated biochemical systems in which mass transfer diffusion and heterogeneous catalytic and electron transfer steps are efficiently coupled and can be easily manipulated.

Multivariate near infrared spectroscopy models for predicting methanol and water content in biodiesel

The transesterification of vegetable oils, animal fats or waste oils with an alcohol (such as methanol) in the presence of a homogeneous catalyst (sodium hydroxide or methoxyde) is commonly used to produce biodiesel. The quality control of the final product is an important issue and near infrared (NIR) spectroscopy recently appears as an appealing alternative to the conventional analytical methods. The use of NIR spectroscopy for this purpose first involves the development of calibration models to relate the near infrared spectrum of biodiesel with the analytical data. The type of pre-processing technique applied to the data prior to the development of calibration may greatly influence the performance of the model. This work analyses the effect of some commonly used pre-processing techniques applied prior to partial least squares (PLS) and principal components regressions (PCR) in the quality of the calibration models developed to relate the near infrared spectrum of biodiesel and its content of methanol and water. The results confirm the importance of testing various pre-processing techniques. For the water content, the smaller validation and prediction errors were obtained by a combination of a second order Savitsky-Golay derivative followed by mean centring prior to PLS and PCR, whereas for methanol calibration the best results were obtained with a first order Savitsky-Golay derivative plus mean centring followed by the orthogonal signal correction.

Heterogeneous OH initiated oxidation: a possible explanation for the persistence of organophosphate flame retardants in air

Heterogeneous reactions between OH radicals and emerging flame retardant compounds coated on inert particles have been investigated. Organophosphate esters (OPEs) including triphenyl phosphate (TPhP), tris-2-ethylhexyl phosphate (TEHP), and tris-1,3-dichloro-2-propyl phosphate (TDCPP) were coated on (NH4)2SO4 particles and exposed to OH radicals in a photochemical flow tube at 298 K and (38.0 ± 2.0) % RH. The degradation of these particle-bound OPEs was observed as a result of OH exposure, as measured using a Time-of-Flight Aerosol Mass Spectrometer. The derived second-order rate constants for the heterogeneous loss of TPhP, TEHP, and TDCPP were (2.1 ± 0.19) × 10(-12), (2.7 ± 0.63) × 10(-12), and (9.2 ± 0.92) × 10(-13) cm(3) molecule(-1) s(-1), respectively, from which approximate atmospheric lifetimes are estimated to be 5.6 (5.2-6.0), 4.3 (3.5-5.6), and 13 (11-14) days. Additional coating of the OPE coated particles with an OH radical active species further increased the lifetimes of these OPEs. These results represent the first reported estimates of heterogeneous reaction rate constants for these species. The results demonstrate that particle bound OPEs are highly persistent in the atmosphere with regard to OH radical oxidation, consistent with the assumption that OPEs can undergo medium or long-range transport, as previously proposed on the basis of field measurements. Finally, these results indicate that future risk assessment and transport modeling of emerging priority chemicals with semi- to low-volatility must consider particle phase heterogeneous loss processes when evaluating environmental persistence.

Determination of oleanolic acid in human plasma and study of its pharmacokinetics in Chinese healthy male volunteers by HPLC tandem mass spectrometry

A highly selective and sensitive HPLC-ESI-MS-MS method was developed for the determination of oleanolic acid in human plasma. The oleanolic acid and glycyrrhetinic acid (internal standard) were recovered from plasma with ethyl acetate liquid-liquid extraction. The organic extracts were dried under a stream of warm nitrogen, reconstituted in mobile phase and injected into a Zorbax-Extend ODS analytical column (150 mm x 4.6 mm i.d., 5 microm), with the mobile phase consisting of methanol-ammonium acetate (32.5 mM) (85:15, v/v) pumped at a flow rate of 1.0 ml/min, and 30% of the eluent was split into a MS system with electrospray ionization tandem mass (ESI-MS-MS) detection in negative ion mode. The tandem mass detection was performed on a Finnigan Surveyor LC-TSQ Quantum Ultra AM tandem mass spectrometer operated in selected reaction monitoring mode. The parent to product ion combinations of m/z 455.4-->455.4 and 469.3-->425.2 at 38 V 1.5 mTorr Ar CID were used to quantify oleanolic acid and glycyrrhetinic acid, respectively. The assay was validated in the concentration range of 0.02-30.0 ng/ml for oleacolic acid when 0.5 ml of plasma was processed. The precision of the assay (expressed as relative standard deviation, R.S.D.%) was less than 15% at all concentrations levels within the tested range and adequate accuracy, and the limit of quantification was 0.02 ng/ml. The established method was applied for the pharmacokinetics study of oleanolic acid capsules in 18 healthy male Chinese volunteers with the mean values of C(max), T(max), AUC(0-48), AUC(0-infinity), t(1/2,) CL/F, and V/F of oleanolic acid after p.o. a single 40 mg dose obtained were 12.12 +/- 6.84 ng/ml, 5.2 +/- 2.9h, 114.34 +/- 74.87 ng h/ml, 124.29 +/- 106.77 ng h/ml, 8.73 +/- 6.11 h, 555.3 +/- 347.7 L/h, and 3371.1 +/- 1,990.1 L, respectively.

Dissolution of Bombyx mori silk fibroin in the calcium nitrate tetrahydrate-methanol system and aspects of wet spinning of fibroin solution

There are still several problems associated with the spinning of dialyzed silk fibroin solutions. In this work some of these problems have been examined. The calcium nitrate tetrahydrate-methanol system was used to dissolve the silk fibroin. A compositional phase diagram was constructed at various concentrations of the solvent system. Regenerated fibroin powders from undialyzed fibroin solution in several coagulants showed different conformations. Regenerated powders from several coagulants except methanol and ethanol were resoluble in water. Atomic absorption analysis revealed that the calcium cations strongly interact with fibroin molecules in dialyzed fibroin solution, which may interfere with the regeneration of a strong fiber. Kinetic studies to determine the diffusion coefficient of methanol into dialyzed and concentrated fibroin solution were reported. The properties of both original and regenerated fibroin such as solubility in water and thermal behaviors using DSC were compared. Regenerated fibroin fiber was spun by the wet spinning method. An X-ray diffractogram showed that the regeneration process decreased the crystallinity of regenerated fibroin fiber. SEM images of the surface and cross section of the regenerated fibroin fibers were discussed.

Biological nitrogen removal of high-strength ammonium industrial wastewater with two-sludge system

The biological nitrogen removal (BNR) process is the most common method for removing low quantities of ammonium from wastewater, but this is not the usual treatment for high-strength ammonium wastewater. The capacity to biologically remove the nitrogen content of a real industrial wastewater with a concentration of 5000 g N-NH(4)(+) L(-1) is demonstrated in this work. The experimental system used is based on a two-sludge system, with a nitrifying activated sludge and a denitrifying activated sludge. This system treated real industrial wastewater for 450 days, and during this period, it showed the capacity for oxidizing all the ammonium at average nitrification rates between 0.11 and 0.18 g N-NH(4)(+)g VSS(-1)d(-1). Two key process parameters were evaluated: the maximum nitrification rate (MNR) and the maximum denitrification rate (MDR). MNR was determined in continuous operation at three different temperatures: 15 degrees C, 20 degrees C and 25 degrees C, obtaining values of 0.10, 0.21 and 0.37 g N-NH(4)(+) g VSS(-1)d(-1), respectively. Complete denitrification was achieved using two different industrial carbon sources, one containing mainly ethanol and the other one methanol. The MDR reached with ethanol (0.64 g N-NO(x)(-) g VSS(-1)d(-1)) was about 6 times higher than the MDR reached with methanol (0.11g N-NO(x)(-)g VSS(-1)d(-1)).

Optimization of microwave-assisted transesterification of dry algal biomass using response surface methodology

The effect of microwave irradiation on the simultaneous extraction and transesterification (in situ transesterification) of dry algal biomass to biodiesel was investigated. A high degree of oil/lipid extraction from dry algal biomass and an efficient conversion of the oils/lipids to biodiesel were demonstrated in a set of well-designed experimental runs. A response surface methodology (RSM) was used to analyze the influence of the process variables (dry algae to methanol (wt/vol) ratio, catalyst concentration, and reaction time) on the fatty acid methyl ester conversion. Based on the experimental results and RSM analysis, the optimal conditions for this process were determined as: dry algae to methanol (wt/vol) ratio of around 1:12, catalyst concentration about 2 wt.%, and reaction time of 4 min. The algal biodiesel samples were analyzed with GC-MS and thin layer chromatography (TLC) methods. Transmission electron microscopy (TEM) images of the algal biomass samples before and after the extraction/transesterification reaction are also presented.