Heavy metal mining using microbes

The use of acidiphilic, chemolithotrophic iron- and sulfur-oxidizing microbes in processes to recover metals from certain types of copper, uranium, and gold-bearing minerals or mineral concentrates is now well established. During these processes insoluble metal sulfides are oxidized to soluble metal sulfates. Mineral decomposition is believed to be mostly due to chemical attack by ferric iron, with the main role of the microorganisms being to reoxidize the resultant ferrous iron back to ferric iron. Currently operating industrial biomining processes have used bacteria that grow optimally from ambient to 50 degrees C, but thermophilic microbes have been isolated that have the potential to enable mineral biooxidation to be carried out at temperatures of 80 degrees C or higher. The development of higher-temperature processes will extend the variety of minerals that can be commercially processed.

Biomineralization of metal-containing ores and concentrates

Biomining is the use of microorganisms to extract metals from sulfide and/or iron-containing ores and mineral concentrates. The iron and sulfide is microbially oxidized to produce ferric iron and sulfuric acid, and these chemicals convert the insoluble sulfides of metals such as copper, nickel and zinc to soluble metal sulfates that can be readily recovered from solution. Although gold is inert to microbial action, microbes can be used to recover gold from certain types of minerals because as they oxidize the ore, they open its structure, thereby allowing gold-solubilizing chemicals such as cyanide to penetrate the mineral. Here, we review a strongly growing microbially-based metal extraction industry, which uses either rapid stirred-tank or slower irrigation technology to recover metals from an increasing range of minerals using a diversity of microbes that grow at a variety of temperatures.

The microbiology of biomining: development and optimization of mineral-oxidizing microbial consortia

Biomining, the use of micro-organisms to recover precious and base metals from mineral ores and concentrates, has developed into a successful and expanding area of biotechnology. While careful considerations are made in the design and engineering of biomining operations, microbiological aspects have been subjected to far less scrutiny and control. Biomining processes employ microbial consortia that are dominated by acidophilic, autotrophic iron- or sulfur-oxidizing prokaryotes. Mineral biooxidation takes place in highly aerated, continuous-flow, stirred-tank reactors or in irrigated dump or heap reactors, both of which provide an open, non-sterile environment. Continuous-flow, stirred tanks are characterized by homogeneous and constant growth conditions where the selection is for rapid growth, and consequently tank consortia tend to be dominated by two or three species of micro-organisms. In contrast, heap reactors provide highly heterogeneous growth environments that change with the age of the heap, and these tend to be colonized by a much greater variety of micro-organisms. Heap micro-organisms grow as biofilms that are not subject to washout and the major challenge is to provide sufficient biodiversity for optimum performance throughout the life of a heap. This review discusses theoretical and pragmatic aspects of assembling microbial consortia to process different mineral ores and concentrates, and the challenges for using constructed consortia in non-sterile industrial-scale operations.

Biocides in hydraulic fracturing fluids: a critical review of their usage, mobility, degradation, and toxicity

Biocides are critical components of hydraulic fracturing ("fracking") fluids used for unconventional shale gas development. Bacteria may cause bioclogging and inhibit gas extraction, produce toxic hydrogen sulfide, and induce corrosion leading to downhole equipment failure. The use of biocides such as glutaraldehyde and quaternary ammonium compounds has spurred a public concern and debate among regulators regarding the impact of inadvertent releases into the environment on ecosystem and human health. This work provides a critical review of the potential fate and toxicity of biocides used in hydraulic fracturing operations. We identified the following physicochemical and toxicological aspects as well as knowledge gaps that should be considered when selecting biocides: (1) uncharged species will dominate in the aqueous phase and be subject to degradation and transport whereas charged species will sorb to soils and be less bioavailable; (2) many biocides are short-lived or degradable through abiotic and biotic processes, but some may transform into more toxic or persistent compounds; (3) understanding of biocides' fate under downhole conditions (high pressure, temperature, and salt and organic matter concentrations) is limited; (4) several biocidal alternatives exist, but high cost, high energy demands, and/or formation of disinfection byproducts limits their use. This review may serve as a guide for environmental risk assessment and identification of microbial control strategies to help develop a sustainable path for managing hydraulic fracturing fluids.

Destruction of cyanide in gold mill effluents: biological versus chemical treatments

In gold mining, cyanide has been the preferred lixiviant worldwide since 1887. Although cyanide can be destroyed and recovered by several processes, it is still widely discussed and examined due to its potential toxicity and environmental impact. Biological treatment of cyanide is a well-established process and has been commercially used at gold mining operations in North America. Biological treatment processes facilitate growth of microorganisms that are essential for the treatment. The present review describes the advances in the use of biological treatment for the destruction of cyanide in gold mill effluents.

Global demand for rare earth resources and strategies for green mining

Rare earth elements (REEs) are essential raw materials for emerging renewable energy resources and 'smart' electronic devices. Global REE demand is slated to grow at an annual rate of 5% by 2020. This high growth rate will require a steady supply base of REEs in the long run. At present, China is responsible for 85% of global rare earth oxide (REO) production. To overcome this monopolistic supply situation, new strategies and investments are necessary to satisfy domestic supply demands. Concurrently, environmental, economic, and social problems arising from REE mining must be addressed. There is an urgent need to develop efficient REE recycling techniques from end-of-life products, technologies to minimize the amount of REEs required per unit device, and methods to recover them from fly ash or fossil fuel-burning wastes.

River loads of suspended solids, nitrogen, phosphorus and herbicides delivered to the Great Barrier Reef lagoon

Degradation of coastal ecosystems in the Great Barrier Reef (GBR) lagoon, Australia, has been linked with increased land-based runoff of suspended solids, nutrients and pesticides since European settlement. This study estimated the increase in river loads for all 35 GBR basins, using the best available estimates of pre-European and current loads derived from catchment modelling and monitoring. The mean-annual load to the GBR lagoon for (i) total suspended solids has increased by 5.5 times to 17,000ktonnes/year, (ii) total nitrogen by 5.7 times to 80,000tonnes/year, (iii) total phosphorus by 8.9 times to 16,000tonnes/year, and (iv) PSII herbicides is 30,000kg/year. The increases in river loads differ across the 10 pollutants and 35 basins examined, reflecting differences in surface runoff, urbanisation, deforestation, agricultural practices, mining and retention by reservoirs. These estimates will facilitate target setting for water quality and desired ecosystem states, and enable prioritisation of critical sources for management.

Microbial destruction of cyanide wastes in gold mining: process review

Microbial destruction of cyanide and its related compounds is one of the most important biotechnologies to emerge in the last two decades for treating process and tailings solutions at precious metals mining operations. Hundreds of plant and microbial species (bacteria, fungi and algae) can detoxify cyanide quickly to environmentally acceptable levels and into less harmful by-products. Full-scale bacterial processes have been used effectively for many years in commercial applications in North America. Several species of bacteria can convert cyanide under both aerobic and anaerobic conditions using it as a primary source of nitrogen and carbon. Other organisms are capable of oxidizing the cyanide related compounds of thiocyanate and ammonia under varying conditions of pH, temperature, nutrient levels, oxygen, and metal concentrations. This paper presents an overview of the destruction of cyanide in mining related solutions by microbial processes.

Agromining: farming for metals in the future?

Phytomining technology employs hyperaccumulator plants to take up metal in harvestable plant biomass. Harvesting, drying and incineration of the biomass generates a high-grade bio-ore. We propose that "agromining" (a variant of phytomining) could provide local communities with an alternative type of agriculture on degraded lands; farming not for food crops, but for metals such as nickel (Ni). However, two decades after its inception and numerous successful experiments, commercial phytomining has not yet become a reality. To build the case for the minerals industry, a large-scale demonstration is needed to identify operational risks and provide "real-life" evidence for profitability.

Genomics, metagenomics and proteomics in biomining microorganisms

The use of acidophilic, chemolithotrophic microorganisms capable of oxidizing iron and sulfur in industrial processes to recover metals from minerals containing copper, gold and uranium is a well established biotechnology with distinctive advantages over traditional mining. A consortium of different microorganisms participates in the oxidative reactions resulting in the extraction of dissolved metal values from ores. Considerable effort has been spent in the last years to understand the biochemistry of iron and sulfur compounds oxidation, bacteria-mineral interactions (chemotaxis, quorum sensing, adhesion, biofilm formation) and several adaptive responses allowing the microorganisms to survive in a bioleaching environment. All of these are considered key phenomena for understanding the process of biomining. The use of genomics, metagenomics and high throughput proteomics to study the global regulatory responses that the biomining community uses to adapt to their changing environment is just beginning to emerge in the last years. These powerful approaches are reviewed here since they offer the possibility of exciting new findings that will allow analyzing the community as a microbial system, determining the extent to which each of the individual participants contributes to the process, how they evolve in time to keep the conglomerate healthy and therefore efficient during the entire process of bioleaching.

Integrated assessment of artisanal and small-scale gold mining in Ghana--part 1: human health review

This report is one of three synthesis documents produced via an integrated assessment (IA) that aims to increase understanding of artisanal and small-scale gold mining (ASGM) in Ghana. Given the complexities surrounding ASGM, an IA framework was utilized to analyze economic, social, health, and environmental data, and co-develop evidence-based responses with pertinent stakeholders. The current analysis focuses on the health of ASGM miners and community members, and synthesizes extant data from the literature as well as co-authors' recent findings regarding the causes, status, trends, and consequences of ASGM in Ghana. The results provide evidence from across multiple Ghanaian ASGM sites that document relatively high exposures to mercury and other heavy metals, occupational injuries and noise exposure. The work also reviews limited data on psychosocial health, nutrition, cardiovascular and respiratory health, sexual health, and water and sanitation. Taken together, the findings provide a thorough overview of human health issues in Ghanaian ASGM communities. Though more research is needed to further elucidate the relationships between ASGM and health outcomes, the existing research on plausible health consequences of ASGM should guide policies and actions to better address the unique challenges of ASGM in Ghana and potentially elsewhere.

Resistance determinants of a highly arsenic-resistant strain of Leptospirillum ferriphilum isolated from a commercial biooxidation tank

Two sets of arsenic resistance genes were isolated from the highly arsenic-resistant Leptospirillum ferriphilum Fairview strain. One set is located on a transposon, TnLfArs, and is related to the previously identified TnAtcArs from Acidithiobacillus caldus isolated from the same arsenopyrite biooxidation tank as L. ferriphilum. TnLfArs conferred resistance to arsenite and arsenate and was transpositionally active in Escherichia coli. TnLfArs and TnAtcArs were sufficiently different for them not to have been transferred from one type of bacterium to the other in the biooxidation tank. The second set of arsenic resistance genes conferred very low levels of resistance in E. coli and appeared to be poorly expressed in both L. ferriphilum and E. coli.

Toward an Assessment of the Global Inventory of Present-Day Mercury Releases to Freshwater Environments

Aquatic ecosystems are an essential component of the biogeochemical cycle of mercury (Hg), as inorganic Hg can be converted to toxic methylmercury (MeHg) in these environments and reemissions of elemental Hg rival anthropogenic Hg releases on a global scale. Quantification of effluent Hg releases to aquatic systems globally has focused on discharges to the global oceans, rather than contributions to freshwater systems that affect local exposures and risks associated with MeHg. Here we produce a first-estimate of sector-specific, spatially resolved global aquatic Hg discharges to freshwater systems. We compare our release estimates to atmospheric sources that have been quantified elsewhere. By analyzing available quantitative and qualitative information, we estimate that present-day global Hg releases to freshwater environments (rivers and lakes) associated with anthropogenic activities have a lower bound of ~1000 Mg· a-1. Artisanal and small-scale gold mining (ASGM) represents the single largest source, followed by disposal of mercury-containing products and domestic waste water, metal production, and releases from industrial installations such as chlor-alkali plants and oil refineries. In addition to these direct anthropogenic inputs, diffuse inputs from land management activities and remobilization of Hg previously accumulated in terrestrial ecosystems are likely comparable in magnitude. Aquatic discharges of Hg are greatly understudied and further constraining associated data gaps is crucial for reducing the uncertainties in the global biogeochemical Hg budget.

Phosphorus removal by acid mine drainage sludge from secondary effluents of municipal wastewater treatment plants

Acid mine drainage (AMD) sludge, a waste product from coal mine water treatment, was used in this study as an adsorbent to develop a cost-effective treatment approach to phosphorus removal from municipal secondary effluents. Batch tests were carried out to study the effects of pH, temperature, concentration, and contact time for phosphorus removal from wastewater. Batch tests were followed by continuous flow tests using a continuous stirred tank reactor (CSTR). Adsorption of orthophosphate onto AMD sludge particles followed the Freundlich isotherm model with an adsorption capacity ranging from 9.89 to 31.97 mg/g when the final effluent concentration increased from 0.21 to 13.61 mg P/L. P adsorption was found to be a rather rapid process and neutral or acidic pH enhanced phosphorus removal. Based on a thermodynamic assessment, P adsorption by AMD sludge was found to be endothermic; consequently, an increase in temperature could also favor phosphorus adsorption. Results from batch tests showed that leaching of metals common to AMD sludges was not likely to be a major issue of concern over the typical pH range (6-8) of secondary wastewater effluents. CSTR tests with three types of water (synthetic wastewater, river water, and municipal secondary effluent) illustrated that P adsorption by AMD sludge was relatively independent of the presence of other ionic species. In treating municipal secondary effluent, a phosphorus removal efficiency in excess of 98% was obtained. Results of this study indicated that it was very promising to utilize AMD sludge for phosphorus removal from secondary effluents and may be relevant to future efforts focused on the control of eutrophication in surface waters.

Different exposure profile of heavy metal and health risk between residents near a Pb-Zn mine and a Mn mine in Huayuan county, South China

Heavy metal contamination of environmental media in mining area is a global major concern because of its potential threat for human health through food chain. However, the comparison of exposure level and health risk is scarce among people living in the vicinity of mining area with different pollution source. In this study, the concentrations of Mn, Cd, As, Pb, Cu, Zn, Cr and Ni in soil, air, water, rice, vegetable, fish, poultry meat and pork from a Pb-Zn mining area and a Mn mining area in Huayuan county, China were determined by inductively coupled plasma mass spectrometry. Results showed that the environmental media and foodstuffs in the two areas were contaminated by Cd, Pb, Zn, Cu, Cr and Ni. However, the pollution was more serious in Pb-Zn mining area than Mn mining area. The total hazard index (HI) was 6.59 and 4.55 in Pb-Zn mining area and Mn mining area, respectively, indicating a moderate non-carcinogenic risk of local people. As intake via rice ingestion was the predominant contributor to the total HI in the two mining areas, accounting for 25% and 35%, respectively. For Pb-Zn mining area, Cd intake through vegetable consumption and Mn intake via air inhalation appeared to be another two important components contributing to HI. This study highlights the multi-element and multi-pathway exposure assessment to evaluate the potential health risk and emphasizes concerns to reduce As and Cd in agricultural products as well as Mn in air to decrease the detrimental health effects of local resident.

Assessment of methane emissions from oil and gas production pads using mobile measurements

A new mobile methane emissions inspection approach, Other Test Method (OTM) 33A, was used to quantify short-term emission rates from 210 oil and gas production pads during eight two-week field studies in Texas, Colorado, and Wyoming from 2010 to 2013. Emission rates were log-normally distributed with geometric means and 95% confidence intervals (CIs) of 0.33 (0.23, 0.48), 0.14 (0.11, 0.19), and 0.59 (0.47, 0.74) g/s in the Barnett, Denver-Julesburg, and Pinedale basins, respectively. This study focused on sites with emission rates above 0.01 g/s and included short-term (i.e., condensate tank flashing) and maintenance-related emissions. The results fell within the upper ranges of the distributions observed in recent onsite direct measurement studies. Considering data across all basins, a multivariate linear regression was used to assess the relationship of methane emissions to well age, gas production, and hydrocarbon liquids (oil or condensate) production. Methane emissions were positively correlated with gas production, but only approximately 10% of the variation in emission rates was explained by variation in production levels. The weak correlation between emission and production rates may indicate that maintenance-related stochastic variables and design of production and control equipment are factors determining emissions.

Characterization and activity studies of highly heavy metal resistant sulphate-reducing bacteria to be used in acid mine drainage decontamination

Biological treatment with sulphate-reducing bacteria (SRB) has been considered as the most promising alternative for acid mine drainage (AMD) decontamination. Normally, these wastewaters contain high concentrations of sulphate and heavy metals, so the search for SRB highly resistant to metals is extremely important for the development of a bioremediation technology. A SRB consortium resistant to high concentrations of heavy metals (Fe, Cu and Zn), similar to those typically present in AMD, was obtained among several environmental samples, from a wastewater treatment plant. The phylogenetic analysis of the dsr gene sequence revealed that this consortium contains species of SRB affiliated to Desulfovibrio desulfuricans and Desulfobulbus rhabdoformis. The results show that the presence of usually lethal concentrations of Fe (400mg/L), Zn (150 mg/L) and Cu (80 mg/L) is not toxic for the sulphate-reducing bacteria present in this sample. As a consequence, a very good efficiency in terms of sulphate reduction and metals removal was obtained. Both ethanol and lactate can be used by this inoculum as carbon source. With the other samples tested sulphate reduction was inhibited by the presence of copper and zinc. This highly metal resistant consortium will be used to inoculate a bioreactor to carry out AMD decontamination.

Effects of adsorbed arsenate on the rate of transformation of 2-line ferrihydrite at pH 10

2-Line ferrihydrite, a form of iron in uranium mine tailings, is a dominant adsorbent for elements of concern (EOC), such as arsenic. As ferrihydrite is unstable under oxic conditions and can undergo dissolution and subsequent transformation to hematite and goethite over time, the impact of transformation on the long-term stability of EOC within tailings is of importance from an environmental standpoint. Here, studies were undertaken to assess the rate of 2-line ferrihydrite transformation at varying As/Fe ratios (0.500-0.010) to simulate tailings conditions at the Deilmann Tailings Management Facility of Cameco Corporation, Canada. Kinetics were evaluated under relevant physical (~1 °C) and chemical conditions (pH ~10). As the As/Fe ratio increased from 0.010 to 0.018, the rate of ferrihydrite transformation decreased by 2 orders of magnitude. No transformation of ferrihydrite was observed at higher As/Fe ratios (0.050, 0.100, and 0.500). Arsenic was found to retard ferrihydrite dissolution and transformation as well as goethite formation.

Submarine and deep-sea mine tailing placements: A review of current practices, environmental issues, natural analogs and knowledge gaps in Norway and internationally

The mining sector is growing in parallel with societal demands for minerals. One of the most important environmental issues and economic burdens of industrial mining on land is the safe storage of the vast amounts of waste produced. Traditionally, tailings have been stored in land dams, but the lack of land availability, potential risk of dam failure and topography in coastal areas in certain countries results in increasing disposal of tailings into marine systems. This review describes the different submarine tailing disposal methods used in the world in general and in Norway in particular, their impact on the environment (e.g. hyper-sedimentation, toxicity, processes related to changes in grain shape and size, turbidity), current legislation and need for future research. Understanding these impacts on the habitat and biota is essential to assess potential ecosystem changes and to develop best available techniques and robust management plans.

Bioadsorption of Rare Earth Elements through Cell Surface Display of Lanthanide Binding Tags

With the increasing demand for rare earth elements (REEs) in many emerging clean energy technologies, there is an urgent need for the development of new approaches for efficient REE extraction and recovery. As a step toward this goal, we genetically engineered the aerobic bacterium Caulobacter crescentus for REE adsorption through high-density cell surface display of lanthanide binding tags (LBTs) on its S-layer. The LBT-displayed strains exhibited enhanced adsorption of REEs compared to cells lacking LBT, high specificity for REEs, and an adsorption preference for REEs with small atomic radii. Adsorbed Tb(3+) could be effectively recovered using citrate, consistent with thermodynamic speciation calculations that predicted strong complexation of Tb(3+) by citrate. No reduction in Tb(3+) adsorption capacity was observed following citrate elution, enabling consecutive adsorption/desorption cycles. The LBT-displayed strain was effective for extracting REEs from the acid leachate of core samples collected at a prospective rare earth mine. Our collective results demonstrate a rapid, efficient, and reversible process for REE adsorption with potential industrial application for REE enrichment and separation.

Electrolyte conditioning-enhanced electrokinetic remediation of arsenic-contaminated mine tailing

Feasibility of electrolyte conditioning with strong acidic or alkaline solution on electrokinetic remediation of arsenic-contaminated mine tailing was investigated in the laboratory. The mine tailing contained calcium oxide of more than 50%. At alkaline condition, arsenic was precipitated with calcium, and formed calcium arsenate which is very stable solid. Catholyte conditioning with strong acidic solution and anolyte conditioning with strong alkaline solution showed similar efficiency to remove arsenic. At 4mAcm(-2) of current density, the removal efficiency of arsenic was 62% after 28 days operation with catholyte conditioning with 0.1M nitric acid.

High contents of rare earth elements (REEs) in stream waters of a Cu-Pb-Zn mining area

Stream waters draining an old mining area present very high rare earth element (REE) contents, reaching 928 microg/l as the maximum total value (sigmaREE). The middle rare earth elements (MREEs) are usually enriched with respect to both the light (LREEs) and heavy (HREEs) elements of this group, producing a characteristic "roof-shaped" pattern of the shale Post-Archean Australian Shales-normalized concentrations. At the Fenice Capanne Mine (FCM), the most important base metal mine of the study area, the REE source coincides with the mine tailings, mostly the oldest ones composed of iron-rich materials. The geochemical history of the REEs released into Noni stream from wastes in the FCM area is strictly determined by the pH, which controls the REE speciation and in-stream processes. The formation of Al-rich and mainly Fe-rich flocs effectively scavenges the REEs, which are readily and drastically removed from the solution when the pH approaches neutrality. Leaching experiments performed on flocs and waste materials demonstrate that Fe-oxides/oxyhydroxides play a key role in the release of lanthanide elements into stream waters. The origin of the "roof-shaped" REE distribution pattern as well as the peculiar geochemical behavior of some lanthanide elements in the aqueous system are discussed.

Occurrence, properties and pollution potential of environmental minerals in acid mine drainage

This paper describes the occurrences, the mineralogical assemblages and the environmental relevance of the AMD-precipitates from the abandoned mine of Valdarcas, Northern Portugal. At this mining site, these precipitates are particularly related with the chemical speciation of iron, which is in according to the abundance of mine wastes enriched in pyrrhotite and pyrite. The more relevant supergene mineralogical assemblages include the following environmental minerals: soluble metal-salts, mainly sulphates, revealing seasonal behaviour, iron-hydroxysulphates and iron-oxyhydroxides, both forming ochre precipitates of poorly and well-crystalline minerals. Pollution potential of the most highly water soluble salts was analysed in order to evaluate the environmental effect of their dissolution by rainfall. Laboratory experiments, carried out with iron and aluminium sulphates, demonstrated the facility to release metals, sulphate and acidity upon dissolution. Regarding the ochre precipitates, composed by several less soluble iron (III)-minerals, the spatial distribution on the nearby aqueous system as well as the proportion of Jarosite, Schwertmannite and Goethite in the mixtures gave information about the halo's contamination promoted by the AMD emerging from the waste-dumps.

Recovery of Nickel and Cobalt from Laterite Tailings by Reductive Dissolution under Aerobic Conditions Using Acidithiobacillus Species

Biomining of sulfidic ores has been applied for almost five decades. However, the bioprocessing of oxide ores such as laterites lags commercially behind. Recently, the Ferredox process was proposed to treat limonitic laterite ores by means of anaerobic reductive dissolution (AnRD), which was found to be more effective than aerobic bioleaching by fungi and other bacteria. We show here that the ferric iron reduction mediated by Acidithiobacillus thiooxidans can be applied to an aerobic reductive dissolution (AeRD) of nickel laterite tailings. AeRD using a consortium of Acidithiobacillus thiooxidans and Acidithiobacillus ferrooxidans extracted similar amounts of nickel (53-57%) and cobalt (55-60%) in only 7 days as AnRD using Acidithiobacillus ferrooxidans. The economic and environmental advantages of AeRD for processing of laterite tailings comprise no requirement for an anoxic atmosphere, 1.8-fold less acid consumption than for AnRD, as well as nickel and cobalt recovered in a ferrous-based pregnant leach solution (PLS), facilitating the subsequent metal recovery. In addition, an aerobic acid regeneration stage is proposed. Therefore, AeRD process development can be considered as environmentally friendly for treating laterites with low operational costs and as an attractive alternative to AnRD.

A cost-benefit analysis of landfill mining and material recycling in China

Landfill mining is an environmentally-friendly technology that combines the concepts of material recycling and sustainable waste management, and it has received a great deal of worldwide attention because of its significant environmental and economic potential in material recycling, energy recovery, land reclamation and pollution prevention. This work applied a cost-benefit analysis model for assessing the economic feasibility, which is important for promoting landfill mining. The model includes eight indicators of costs and nine indicators of benefits. Four landfill mining scenarios were designed and analyzed based on field data. The economic feasibility of landfill mining was then evaluated by the indicator of net present value (NPV). According to our case study of a typical old landfill mining project in China (Yingchun landfill), rental of excavation and hauling equipment, waste processing and material transportation were the top three costs of landfill mining, accounting for 88.2% of the total cost, and the average cost per unit of stored waste was 12.7USDton(-1). The top three benefits of landfill mining were electricity generation by incineration, land reclamation and recycling soil-like materials. The NPV analysis of the four different scenarios indicated that the Yingchun landfill mining project could obtain a net positive benefit varying from 1.92 million USD to 16.63 million USD. However, the NPV was sensitive to the mode of land reuse, the availability of energy recovery facilities and the possibility of obtaining financial support by avoiding post-closure care.