Survival of enterococci and staphylococci on hospital fabrics and plastic

The transfer of gram-positive bacteria, particularly multiresistant Staphylococcus aureus (MRSA) and vancomycin-resistant enterococci (VRE), among patients is a growing concern. One critical aspect of bacterial transfer is the ability of the microorganism to survive on various common hospital surfaces. The purpose of this study was to determine the survival of 22 gram-positive bacteria (vancomycin-sensitive and -resistant enterococci and methicillin-sensitive and -resistant staphylococci) on five common hospital materials: smooth 100% cotton (clothing), 100% cotton terry (towels), 60% cotton-40% polyester blend (scrub suits and lab coats), 100% polyester (privacy drapes), and 100% polypropylene plastic (splash aprons). Swatches were inoculated with 10(4) to 10(5) CFU of a microorganism, assayed daily by placing the swatches in nutritive media, and examining for growth after 48 h. All isolates survived for at least 1 day, and some survived for more than 90 days on the various materials. Smaller inocula (10(2)) survived for shorter times but still generally for days. Antibiotic sensitivity had no consistent effect on survival. The long survival of these bacteria, including MRSA and VRE, on commonly used hospital fabrics, such as scrub suits, lab coats, and hospital privacy drapes, underscores the need for meticulous contact control procedures and careful disinfection to limit the spread of these bacteria.

Putting copper into action: copper-impregnated products with potent biocidal activities

Copper ions, either alone or in copper complexes, have been used for centuries to disinfect liquids, solids, and human tissue. Today copper is used as a water purifier, algaecide, fungicide, nematocide, molluscicide, and antibacterial and antifouling agent. Copper also displays potent antiviral activity. We hypothesized that introducing copper into clothing, bedding, and other articles would provide them with biocidal properties. A durable platform technology has been developed that introduces copper into cotton fibers, latex, and other polymeric materials. This study demonstrates the broad-spectrum antimicrobial (antibacterial, antiviral, antifungal) and antimite activities of copper-impregnated fibers and polyester products. This technology enabled the production of antiviral gloves and filters (which deactivate HIV-1 and other viruses), antibacterial self-sterilizing fabrics (which kill antibiotic-resistant bacteria, including methicillin-resistant Staphylococcus aureus and vancomycin-resistant Enterococci), antifungal socks (which alleviate symptoms of athlete's foot), and anti-dust mite mattress covers (which reduce mite-related allergies). These products did not have skin-sensitizing properties, as determined by guine pig maximization and rabbit skin irritation tests. Our study demonstrates the potential use of copper in new applications. These applications address medical issues of the greatest importance, such as viral transmissions; nosocomial, or healthcare-associated, infections; and the spread of antibiotic-resistant bacteria.

A practical procedure for producing silver nanocoated fabric and its antibacterial evaluation for biomedical applications

A novel and universal procedure has been developed for producing nanosized stable silver particles on cotton fabrics in a simple and cost-effective manner with complete control of the silver loading level on the fabrics; the antibacterial effect of Ag-nanocoated fabrics on various bacteria was evaluated by growth inhibition; for biomedical applications, skin irritation tests on guinea pigs were performed and no side effects were observed.

Sonochemical coating of textiles with hybrid ZnO/chitosan antimicrobial nanoparticles

Textiles are good substrates for growth of microorganisms especially under moisture and temperature conditions found in hospitals. Microbial shedding from the body occurs continuously at contact of the patient with textile materials used in medical practices, contributing to the occurrence of hospital acquired infections. Thus, the use of efficient antimicrobial textiles is necessary to prevent the transfer of pathogens and the infection incidence. In this work, hybrid antimicrobial coatings were generated on cotton fabrics by means of a one-step simultaneous sonochemical deposition of ZnO nanoparticles (NPs) and chitosan. The process was further optimized in terms of reagents concentration and processing time in order to improve the antibacterial properties of the fabric and ensure their biocompatibility. The highest antibacterial activity of the fabrics against two medically relevant bacterial species was achieved in a 30 min sonochemical coating process using 2 mM ZnO NPs suspension. When chitosan was simultaneously deposited with the same amount of ZnO, the obtained hybrid NPs coating displayed higher by 48 and 17% antibacterial activity against Staphylococcus aureus and Escherichia coli, respectively. The presence of biopolymer also improved the durability of the antimicrobial effect of the coatings by 21% for Staphylococcus aureus and 40% for Escherichia coli, evaluated after applying multiple washing cycles at hospital laundering regimes. Finally, 87% biocompatibility improvement supported by fibroblast viability was observed for the hybrid ZnO/chitosan coating compared to the steady decrease of cells viability over one week in contact with the fabrics coated with ZnO alone.

Transfer of bacteria from fabrics to hands and other fabrics: development and application of a quantitative method using Staphylococcus aureus as a model

AIMS

To develop and apply a quantitative protocol for assessing the transfer of bacteria from bleached and undyed fabrics of 100% cotton and 50% cotton + 50% polyester (poly cotton) to fingerpads or other pieces of fabric.

METHODS AND RESULTS

Test pieces of the fabrics were mounted on custom-made stainless steel carriers to give a surface area of 1 cm in diameter, and each piece seeded with about 10(5) cfu of Staphylococcus aureus from an overnight broth culture; the inoculum contained 5% fetal bovine serum as the soil load. Transfer from fabric to fabric was performed by direct contact using moist and dry fabrics. Transfers from fabrics to fingerpads of adult volunteers were tested using moist, dry and re-moistened pieces of the fabrics, with or without friction during the contact. Bacterial transfer from fabrics to moistened fingerpads was also studied. All the transfers were conducted under ambient conditions at an applied pressure of 0.2 kg cm(-2). After the transfer, the recipient fingerpads or fabric pieces were eluted, the eluates spread-plated, along with appropriate controls, on tryptic soy agar and the percentage transfer calculated after the incubation of the plates for 24 h at 37 degrees C.

CONCLUSION

Bacterial transfer from moist donor fabrics using recipients with moisture was always higher than that to and from dry ones. Friction increased the level of transfer from fabrics to fingerpads by as much as fivefold. Bacterial transfer from poly cotton was consistently higher when compared with that from all-cotton material.

SIGNIFICANCE AND IMPACT OF THE STUDY

The data generated should help in the development of better models to assess the role fabrics may play as vehicles for infectious agents. Also, the basic design of the reported methodology lends itself to work with other types of human pathogens.

Decontamination assessment of Bacillus anthracis, Bacillus subtilis, and Geobacillus stearothermophilus spores on indoor surfaces using a hydrogen peroxide gas generator

AIMS

To evaluate the decontamination of Bacillus anthracis, Bacillus subtilis, and Geobacillus stearothermophilus spores on indoor surface materials using hydrogen peroxide gas.

METHODS AND RESULTS

Bacillus anthracis, B. subtilis, and G. stearothermophilus spores were dried on seven types of indoor surfaces and exposed to > or =1000 ppm hydrogen peroxide gas for 20 min. Hydrogen peroxide exposure significantly decreased viable B. anthracis, B. subtilis, and G. stearothermophilus spores on all test materials except G. stearothermophilus on industrial carpet. Significant differences were observed when comparing the reduction in viable spores of B. anthracis with both surrogates. The effectiveness of gaseous hydrogen peroxide on the growth of biological indicators and spore strips was evaluated in parallel as a qualitative assessment of decontamination. At 1 and 7 days postexposure, decontaminated biological indicators and spore strips exhibited no growth, while the nondecontaminated samples displayed growth.

CONCLUSIONS

Significant differences in decontamination efficacy of hydrogen peroxide gas on porous and nonporous surfaces were observed when comparing the mean log reduction in B. anthracis spores with B. subtilis and G. stearothermophilus spores.

SIGNIFICANCE AND IMPACT OF THE STUDY

These results provide comparative information for the decontamination of B. anthracis spores with surrogates on indoor surfaces using hydrogen peroxide gas.

Role of healthcare apparel and other healthcare textiles in the transmission of pathogens: a review of the literature

Healthcare workers (HCWs) wear uniforms, such as scrubs and lab coats, for several reasons: (1) to identify themselves as hospital personnel to their patients and employers; (2) to display professionalism; and (3) to provide barrier protection for street clothes from unexpected exposures during the work shift. A growing body of evidence suggests that HCWs' apparel is often contaminated with micro-organisms or pathogens that can cause infections or illnesses. While the majority of scrubs and lab coats are still made of the same traditional textiles used to make street clothes, new evidence suggests that current innovative textiles function as an engineering control, minimizing the acquisition, retention and transmission of infectious pathogens by reducing the levels of bioburden and microbial sustainability. This paper summarizes recent literature on the role of apparel worn in healthcare settings in the acquisition and transmission of healthcare-associated pathogens. It proposes solutions or technological interventions that can reduce the risk of transmission of micro-organisms that are associated with the healthcare environment. Healthcare apparel is the emerging frontier in epidemiologically important environmental surfaces.

N-Halamine-modified antimicrobial polypropylene nonwoven fabrics for use against airborne bacteria

Disinfecting, nonbleaching compound 1-chloro-2,2,5,5-tetramethyl-4-imidazolidinone (MC) was uniformly coated onto polypropylene melt-blown nonwoven fabrics having basis-weights of 22 and 50 g/m(2) in order to impart antimicrobial properties via a pad-dry technique. The antimicrobial efficacies of the tested fabrics loaded with MC compound were evaluated against bioaerosols of Staphylococcus aureus and Escherichia coli O157:H7 utilizing a colony counting method. It was determined that both types of coated fabrics exhibited superior antimicrobial efficacy upon exposure to aerosol generation for 3 h. The effect of the coating on air permeability was found to be minimal. Samples were stable for a 6 month time period when they were stored in darkness. However, when the fabrics were exposed to fluorescent light, partial chlorine loss was observed. The MC-coated fabrics exhibited great potential for use in protective face masks and air filters to combat airborne pathogens.

Response surface methodology for optimization of medium for decolorization of textile dye Direct Black 22 by a novel bacterial consortium

Decolorization and degradation of polyazo dye Direct Black 22 was carried out by distillery spent wash degrading mixed bacterial consortium, DMC. Response surface methodology (RSM) involving a central composite design (CCD) in four factors was successfully employed for the study and optimization of decolorization process. The hyper activities and interactions between glucose concentration, yeast extract concentration, dye concentration and inoculum size on dye decolorization were investigated and modeled. Under optimized conditions the bacterial consortium was able to decolorize the dye almost completely (>91%) within 12h. Bacterial consortium was able to decolorize 10 different azo dyes. The optimum combination of the four variables predicted through RSM was confirmed through confirmatory experiments and hence this bacterial consortium holds potential for the treatment of industrial waste water. Dye degradation products obtained during the course of decolorization were analyzed by HPTLC.

Bioremediation of Textile Azo Dyes by Aerobic Bacterial Consortium Aerobic Degradation of Selected Azo Dyes by Bacterial Consortium

An aerobic bacterial consortium consisting of two isolated strains (BF1, BF2) and a strain of Pseudomonas putida (MTCC1194) was developed for the aerobic degradation of a mixture of textile azodyes and individual azodyes at alkaline pH (9-10.5) and salinity (0.9-3.68 g/l) at ambient temperature (28 +/- 2 degrees C). The degradation efficiency of the strains in different media (mineral media and in the Simulated textile effluent (STE)) and at different dye concentrations were studied. The presence of a H2O2 independent oxidase-laccase (26.5 IU/ml) was found in the culture filtrate of the organism BF2. The analysis of the degraded products by TLC and HPLC, after the microbial treatment of the dyes showed the absence of amines and the presence of low molecular weight oxidative degradation products. The enzymes present in the crude supernatant was found to be reusable for the dye degradation.

Environmentally friendly antibacterial cotton textiles finished with siloxane sulfopropylbetaine

This paper reports a novel environmentally friendly antibacterial cotton textile finished with reactive siloxane sulfopropylbetaine(SSPB). The results show that SSPB can be covalently bound onto the cotton textile surface, imparting perdurable antibacterial activity. The textiles finished with SSPB have been investigated systematically from the mechanical properties, thermal stability, hydrophilic properties and antibacterial properties. It is found that the hydrophilicity and breaking strength are improved greatly after the cotton textiles are finished with SSPB. Additionally, the cotton textiles finished with SSPB exhibit good antibacterial activities against gram-positive bacteria Staphylococcus aureus (S.aureus, ATCC 6538), gram-negative bacteria Escherichia coli (E.coli, 8099) and fungi Candida albicans (C.albicans, ATCC 10231). Moreover, SSPB is nonleachable from the textiles, and it does not induce skin stimulation and is nontoxic to animals. Thus, SSPB is ideal candidate for environmentally friendly antibacterial textile applications.

A laboratory evaluation of the decontamination properties of microfibre cloths

Standards of cleanliness in health care continue to attract attention. Effective cleaning requires the input of energy, and microfibre cloths may help in the physical removal of soil. The ability of these cloths to remove organic soil (measured by ATP) and bacteria was compared with paper towel and a conventional cloth in controlled wet and dry conditions. When used wet on a dry surface, the cleaning ability of six different microfibre cloths was variable, and in most cases, not significantly better than paper towel or a conventional cloth. One type of microfibre cloth did perform significantly better than the others and paper towel in reducing both organic soil and microbial load. When used dry on a dry surface, there was no significant difference between the cloths, and none of the cloths reduced microbial and organic bioburden effectively. The ability of the cloths to recontaminate the surface was also tested, and some of the microfibre cloths transferred significantly less organic debris and micro-organisms back to the surface than other cloths. Different makes of microfibre cloths have different characteristics, and the name 'microfibre' should not imply superior cleaning efficacy.

Inhibition of Candida auris Biofilm Formation on Medical and Environmental Surfaces by Silver Nanoparticles

Candida auris is an emerging pathogenic fungus implicated in healthcare-associated outbreaks and causes bloodstream infections associated with high mortality rates. Biofilm formation represents one of the major pathogenetic traits associated with this microorganism. Unlike most other Candida species, C. auris has the ability to survive for weeks on different surfaces. Therefore, there is an urgent need to develop new effective control strategies to combat the threat of C. auris. Advances in nanotechnologies have emerged that carry significant potential impact against Candida biofilms. We obtained pure round silver nanoparticles (AgNPs) (1 to 3 nm in diameter) using a microwave-assisted synthetic approach. When tested against C. auris, our results indicated a potent inhibitory activity both on biofilm formation (half maximal inhibitory concentration (IC₅₀) of 0.06 ppm) and against preformed biofilms (IC₅₀ of 0.48 ppm). Scanning electron microscopy images of AgNP-treated biofilms showed cell wall damage mostly by disruption and distortion of the outer surface of the fungal cell wall. In subsequent experiments AgNPs were used to functionalize medical and environmental surfaces. Silicone elastomers functionalized with AgNPs demonstrated biofilm inhibition (>50%) at relatively low concentrations (2.3 to 0.28 ppm). Bandage dressings loaded with AgNPs inhibited growth of C. auris biofilms by more than 80% (2.3 to 0.017 ppm). Also, to demonstrate long-lasting protection, dressings loaded with AgNPs (0.036 ppm) were washed thoroughly with phosphate-buffered saline, maintaining protection against the C. auris growth from cycles 1 to 3 (>80% inhibition) and from cycles 4 to 6 (>50% inhibition). Our results demonstrate the dose-dependent activity of AgNPs against biofilms formed by C. auris on both medical (silicone elastomer) and environmental (bandage fibers) surfaces. The AgNPs-functionalized fibers retain the fungicidal effect even after repeated thorough washes. Overall these results point to the utility of silver nanoparticles to prevent and control infections caused by this emerging pathogenic fungus.

Performances of anaerobic and aerobic membrane bioreactors for the treatment of synthetic textile wastewater

This study aims at comparatively evaluating anaerobic and aerobic MBRs for the treatment of azo-dye containing synthetic wastewater. Also, the filtration performances of AnMBR and AeMBR were compared under similar operating conditions. In both MBRs, high COD removal efficiencies were observed. Although almost complete color removal was observed in AnMBR, only partial (30-50%) color removal was achieved in AeMBR. AnMBR was successfully operated up to 9 L/(m(2)h) (LMH) and no chemical cleaning was required at 4.5 LMH for around 50 days. AeMBR was operated successfully up to 20 LMH. The filtration resistance of AnMBR was generally higher compared to AeMBR although reversible fouling rates were comparable. In both MBRs, offline chemical cleaning with NaOCl and sulfuric acid almost completely removed irreversible fouling and the resistances of chemically cleaned membranes were close to those of new membranes.

Production and Characterization of Superhydrophobic and Antibacterial Coated Fabrics Utilizing ZnO Nanocatalyst

Dirt and microorganisms are the major problems in textiles which can generate unpleasant odor during their growth. Here, zinc oxide (ZnO) nanoparticles prepared by sol-gel method were loaded on the cotton fabrics using spin coating technique to enhance their antimicrobial properties and water repellency. The effects of ZnO precursor concentration, precursor solution pH, number of coating runs, and Mg doping percent on the structures, morphologies, and water contact angles (WCA) of the ZnO-coated fabrics were addressed. At 0.5 M concentration and pH7, more homogeneous and smaller ZnO nanoparticles were grown along the preferred (0 0 2) direction and uniformly distributed on the fabric with a crystallite size 17.98 nm and dislocation density 3.09 × 10-3 dislocation/nm2. The substitution of Zn 2+ with Mg 2+ ions slightly shifted the (002) peak position to a higher angle. Also, the zeta potential and particle size distribution were measured for ZnO nanoparticle suspension. A superhydrophobic WCA = 154° was measured for the fabric that coated at 0.5 M precursor solution, pH 7, 20 runs and 0% Mg doping. Moreover, the antibacterial activities of the ZnO-coated fabric were investigated against some gram-positive and gram-negative bacteria such as Salmonella typhimurium, Klebsiella pneumonia, Escherichia coli, and Bacillus subtilis.

Microbial population in the biomass adhering to supporting material in a packed-bed reactor degrading organic solid waste

An anaerobic packed-bed reactor using carbon fiber textiles (CFT) as the supporting material was continuously operated using an artificial garbage slurry. 16S rRNA gene analysis showed that many bacteria in the biomass adhering to CFT were closely related to those observed from other anaerobic environments, although a wide variety of unidentified bacteria were also found. Dot blot hybridization results clarified that 16S rRNA levels of methanogens in the adhering biomass were higher than those in the effluent. Based on microscopic observation, the adhering biomass consisted of microorganisms, organic material, and void areas. Bacteria and Archaea detected by fluorescence in situ hybridization were distributed from the surface to the inner regions of the adhering biomass. Methanosarcina sp. tended to be more abundant in the inner part of the adhering biomass than at the surface. This is the first report to elucidate the structure of the microbial community on CFT in a packed-bed reactor.

Highly stable, antiviral, antibacterial cotton textiles via molecular engineering

Cotton textiles are ubiquitous in daily life and are also one of the primary mediums for transmitting viruses and bacteria. Conventional approaches to fabricating antiviral and antibacterial textiles generally load functional additives onto the surface of the fabric and/or their microfibres. However, such modifications are susceptible to deterioration after long-term use due to leaching of the additives. Here we show a different method to impregnate copper ions into the cellulose matrix to form a copper ion-textile (Cu-IT), in which the copper ions strongly coordinate with the oxygen-containing polar functional groups (for example, hydroxyl) of the cellulose chains. The Cu-IT displays high antiviral and antibacterial performance against tobacco mosaic virus and influenza A virus, and Escherichia coli, Salmonella typhimurium, Pseudomonas aeruginosa and Bacillus subtilis bacteria due to the antimicrobial properties of copper. Furthermore, the strong coordination bonding of copper ions with the hydroxyl functionalities endows the Cu-IT with excellent air/water retainability and superior mechanical stability, which can meet daily use and resist repeated washing. This method to fabricate Cu-IT is cost-effective, ecofriendly and highly scalable, and this textile appears very promising for use in household products, public facilities and medical settings.

Ethanol production from cotton-based waste textiles

Ethanol production from cotton linter and waste of blue jeans textiles was investigated. In the best case, alkali pretreatment followed by enzymatic hydrolysis resulted in almost complete conversion of the cotton and jeans to glucose, which was then fermented by Saccharomyces cerevisiae to ethanol. If no pretreatment applied, hydrolyses of the textiles by cellulase and beta-glucosidase for 24 h followed by simultaneous saccharification and fermentation (SSF) in 4 days, resulted in 0.140-0.145 g ethanol/g textiles, which was 25-26% of the corresponding theoretical yield. A pretreatment with concentrated phosphoric acid prior to the hydrolysis improved ethanol production from the textiles up to 66% of the theoretical yield. However, the best results obtained from alkali pretreatment of the materials by NaOH. The alkaline pretreatment of cotton fibers were carried out with 0-20% NaOH at 0 degrees C, 23 degrees C and 100 degrees C, followed by enzymatic hydrolysis up to 4 days. In general, higher concentration of NaOH resulted in a better yield of the hydrolysis, whereas temperature had a reverse effect and better results were obtained at lower temperature. The best conditions for the alkali pretreatment of the cotton were obtained in this study at 12% NaOH and 0 degrees C and 3 h. In this condition, the materials with 3% solid content were enzymatically hydrolyzed at 85.1% of the theoretical yield in 24 h and 99.1% in 4 days. The alkali pretreatment of the waste textiles at these conditions and subsequent SSF resulted in 0.48 g ethanol/g pretreated textiles used.

Antimicrobial finish of textiles by chitosan UV-curing

The purpose of this research work was to develop a textile finish based on the radical UV-curing of chitosan on textiles to confer antimicrobial properties. Chitosan is a biopolymer with unique properties such as biodegradability, non-toxicity, antimicrobial activity. In this work cotton or silk fabrics and synthetic filter fabrics were impregnated with an acid solution of chitosan added of the photoinitiator in the proper amount and cured at room temperature by exposure to UV lamp. Process conditions such as percentage add-on, dilution, chitosan-fabric contact time, irradiation time and power, were optimized. The antimicrobial activity of finished fabrics was tested according to ASTM E 2149-01 standard test performed with Escherichia Coli ATCC 8739. Moreover dyeing test with Turquoise Telon dye were carried out to evaluate the treatment homogeneity while the amino group content was determined by ninhydrin assay. Moreover on cotton and silk fabrics the treatment fastness to domestic laundering was tested, according to UNI EN ISO105-C01. Obtained results showed a strong antimicrobial activity conferred by the treatment, homogeneous on fabric surface. It is evident already at low add-on, without affecting the hand properties of natural fabrics and the filtration characteristics of the synthetic filter fabrics. Finally, washing fastness was better for samples prepared with a better penetration of chitosan inside the fibers.

Daylight-Induced Antibacterial and Antiviral Cotton Cloth for Offensive Personal Protection

Cotton fabrics with durable and reusable daylight-induced antibacterial/antiviral functions were developed by using a novel fabrication process, which employs strong electrostatic interaction between cationic cotton fibers and anionic photosensitizers. The cationic cotton contains polycationic short chains produced by a self-propagation of 2-diehtylaminoehtyl chloride (DEAE-Cl) on the surface of cotton fibers. Then, the fabric (i.e., polyDEAE@cotton) can be readily functionalized with anionic photosensitizers like rose Bengal and sodium 2-anthraquinone sulfate to produce biocidal reactive oxygen species (ROS) under light exposure and consequently provide the photo-induced biocidal functions. The biocidal properties of the photo-induced fabrics (PIFs) were demonstrated by ROS production measurements, bactericidal performance against bacteria (e.g., E coli and L. innocua), and antiviral results against T7 bacteriophage. The PIFs achieved 99.9999% (6 log) reductions against bacteria and the bacteriophage within 60 min of daylight exposure. Moreover, the PIFs showcase excellent washability and photostability, making them ideal materials for reusable face masks and protective suits with improved biological protections compared with traditional PPE. This work demonstrated that the cationized cotton could serve as a platform for different functionalization applications, and the resulting fiber materials could inspire the development of reusable and sustainable PPE with significant bioprotective properties to fight the COVID-19 pandemic as well as the spread of other contagious diseases.

Evaluation of Regeneration Processes for Filtering Facepiece Respirators in Terms of the Bacteria Inactivation Efficiency and Influences on Filtration Performance

The regeneration of filtering facepiece respirators (FFRs) is of critical importance because of the severe shortage of FFRs during large-scale outbreaks of respiratory epidemics, such as COVID-19. Comprehensive experiments regarding FFR regeneration were performed in this study with model bacteria to illustrate the decontamination performance of the regeneration processes. The results showed that it is dangerous to use a contaminated FFR without any microbe inactivation treatment because the bacteria can live for more than 8 h. The filtration efficiency and surface electrostatic potential of 75% ethanol-treated FFRs were significantly reduced, and a most penetrating particle size of 200 nm was observed. Steam and microwave irradiation (MWI) showed promising decontamination performances, achieving 100% inactivation in 90 and 30 min, respectively. The filtration efficiencies of steam-treated FFRs for 50 and 100 nm particles decreased from 98.86% and 99.51% to 97.58% and 98.79%, respectively. Ultraviolet irradiation (UVI) effectively inactivated the surface bacteria with a short treatment of 5 min and did not affect the filtration performance. However, the UV dose reaching different layers of the FFP2 mask sample gradually decreased from the outermost layer to the innermost layer, while the model bacteria on the second and third layers could not be killed completely. UVI+MWI and steam were recommended to effectively decontaminate the used respirators and still maintain the respirators' filtration efficiency. The present work provides a comprehensive evaluation for FFR regeneration in terms of the filtration efficiencies for 50-500 nm particles, the electrostatic properties, mechanical properties, and decontamination effects.

Distinctive bacteria-binding property of cloth materials

BACKGROUND

Nosocomial infections may be caused by pathogens that are transmitted from the hands or clothes of hospital personnel. Handwashing has been evaluated as effective against the spread of pathogens, but transmission through clothes has been little investigated. Evaluation of bacterial adherence to clothes is difficult because of the nonuniform amount of water absorbance by cloth. Therefore, we measured binding of bacteria to cloth fibers made of cotton, nylon, polyester, acrylic, or sheep's wool and tried to characterize bacterial binding to cloth.

METHODS

We chose to study the opportunistic pathogens Staphylococcus aureus and Pseudomonas aeruginosa. Cloth fibers were incubated with bacterial suspensions in silicone-coated tubes. We evaluated the reduction of numbers of bacteria in solutions incubated with the fibers and calculated binding ratios of bacteria to the fibers.

RESULTS

Polyester or acrylic fibers bound S aureus and P aeruginosa at high ratios (>80%), but cotton fibers bound them at low ratios (<10%). Nylon fibers bound S aureus at low ratios, but P aeruginosa at intermediate ratios.

CONCLUSION

The results suggested that polyester, acrylic, or wool clothes could be good carriers of S aureus and P aeruginosa and thus should be covered with cotton clothes to minimize the spread of the pathogens.

Comparison of methods for determining the effectiveness of antibacterial functionalized textiles

Antimicrobial functionalization of textiles is important for various applications, such as protection of textile materials from decomposition, generation of more effective wound dressings, and the prevention of infections or malodors resulting from bacterial growth. In order to test the efficacy of new products, their antibacterial activity needs to be evaluated. At present, several different procedures are being used for this purpose, hindering comparisons among different studies. The present paper compares five of these assays using a sample panel of different textiles functionalized with copper (Cu) and silver (Ag) as antibacterial agents, and discusses the suitability of these methods for different analytical requirements. Bacterial viability was determined by measuring the optical density at 600 nm, a colorimetric assay based on MTT (3-[4, 5-dimethylthiazol-2-yl]-2, 5 diphenyl tetrazolium bromide) conversion, an agar diffusion assay, and colony formation, either after culturing in media containing textile samples, or after recovery from textiles soaked with bacterial suspension. All experiments were performed with a Gram-negative (Escherichia coli) and a Gram-positive (Staphylococcus warneri) model organism. In general, the results yielded by the different methods were of good comparability. To identify the most suitable test system for the particular type of antibacterial coating, several factors need to be taken into account, such as choosing appropriate endpoints for analyzing passive or active antibacterial effects, selection of relevant microorganisms, correcting for potential interference by leaching of colored textile coatings, required hands on time, and the necessary sensitivity.

Smart Textiles with Self-Disinfection and Photothermochromic Effects

Self-disinfecting textile materials employing combined photodynamic/photothermal effects enable the prevention of microbial infections, a property that has great potential in healthcare applications. However, smart textiles with stimulus responses to ambient temperature are marvelous materials for enhancing their photothermal applications with additional functions. It is still challenging to realize vivid and contrasting color changes as temperature indicators. Herein, through the in situ growth of PCN-224 metal-organic frameworks (MOFs), the electrospraying of a Ti₃C₂ MXene colloid, and the screen printing of a thermochromic dye, a smart photothermochromic self-disinfecting textile has been fabricated. An antibacterial inactivation study revealed 99.9999% inactivation toward gram-negative (Escherichia coli ATCC 8099) and gram-positive (Staphylococcus aureus ATCC 6538) bacteria in 30 min. A mechanism study revealed that light-driven singlet oxygen and heat are the main reasons for bacterial inactivation. Interestingly, the fabrics presented photothermal effects not only under a handheld 780 nm NIR laser but also under visible Xe lamp (λ ≥ 420 nm) illumination. The color of the fabrics (S-CF@PCN_0.08) changed completely from dark green to dark red when the temperature exceeded 45 °C under Xe lamp illumination. Furthermore, the photothermochromic effect occurred in just 1 s under a 780 nm laser. Taken together, this smart photothermochromic self-disinfecting textile permits a new way to feedback the timely signal of temperature by color change and provides novel insights into the development of self-disinfecting textiles.

Bioremediation of textile azo dyes by an aerobic bacterial consortium using a rotating biological contactor

The degradation of an azo dye mixture by an aerobic bacterial consortium was studied in a rotating biological reactor. Laterite pebbles of particle size 850 microm to 1.44 mm were fixed on gramophone records using an epoxy resin on which the developed consortium was immobilized. Rate of degradation, BOD, biomass determination, enzymes involved, and fish bioassay were studied. The RBC has a high efficiency for dye degradation even at high dye concentrations (100 microg/mL) and high flow rate (36 L/h) at alkaline pH and salinity conditions normally encountered in the textile effluents. Bioassays (LD-50) using Thilapia fish in treated effluent showed that the percentage mortality was zero over a period of 96 h, whereas the mortality was 100% in untreated dye water within 26 h. Fish bioassay confirms that the effluent from RBC can be discharged safely to the environment.