The chemistry behind antioxidant capacity assays

This review summarizes the multifaceted aspects of antioxidants and the basic kinetic models of inhibited autoxidation and analyzes the chemical principles of antioxidant capacity assays. Depending upon the reactions involved, these assays can roughly be classified into two types: assays based on hydrogen atom transfer (HAT) reactions and assays based on electron transfer (ET). The majority of HAT-based assays apply a competitive reaction scheme, in which antioxidant and substrate compete for thermally generated peroxyl radicals through the decomposition of azo compounds. These assays include inhibition of induced low-density lipoprotein autoxidation, oxygen radical absorbance capacity (ORAC), total radical trapping antioxidant parameter (TRAP), and crocin bleaching assays. ET-based assays measure the capacity of an antioxidant in the reduction of an oxidant, which changes color when reduced. The degree of color change is correlated with the sample's antioxidant concentrations. ET-based assays include the total phenols assay by Folin-Ciocalteu reagent (FCR), Trolox equivalence antioxidant capacity (TEAC), ferric ion reducing antioxidant power (FRAP), "total antioxidant potential" assay using a Cu(II) complex as an oxidant, and DPPH. In addition, other assays intended to measure a sample's scavenging capacity of biologically relevant oxidants such as singlet oxygen, superoxide anion, peroxynitrite, and hydroxyl radical are also summarized. On the basis of this analysis, it is suggested that the total phenols assay by FCR be used to quantify an antioxidant's reducing capacity and the ORAC assay to quantify peroxyl radical scavenging capacity. To comprehensively study different aspects of antioxidants, validated and specific assays are needed in addition to these two commonly accepted assays.

Standardized methods for the determination of antioxidant capacity and phenolics in foods and dietary supplements

Methods available for the measurement of antioxidant capacity are reviewed, presenting the general chemistry underlying the assays, the types of molecules detected, and the most important advantages and shortcomings of each method. This overview provides a basis and rationale for developing standardized antioxidant capacity methods for the food, nutraceutical, and dietary supplement industries. From evaluation of data presented at the First International Congress on Antioxidant Methods in 2004 and in the literature, as well as consideration of potential end uses of antioxidants, it is proposed that procedures and applications for three assays be considered for standardization: the oxygen radical absorbance capacity (ORAC) assay, the Folin-Ciocalteu method, and possibly the Trolox equivalent antioxidant capacity (TEAC) assay. ORAC represent a hydrogen atom transfer (HAT) reaction mechanism, which is most relevant to human biology. The Folin-Ciocalteu method is an electron transfer (ET) based assay and gives reducing capacity, which has normally been expressed as phenolic contents. The TEAC assay represents a second ET-based method. Other assays may need to be considered in the future as more is learned about some of the other radical sources and their importance to human biology.

Estimation of total phenolic content and other oxidation substrates in plant tissues using Folin-Ciocalteu reagent

Non-structural phenolic compounds perform a variety of functions in plants, including acting as antioxidants. We describe a microplate-adapted colorimetric total phenolics assay that utilizes Folin-Ciocalteu (F-C) reagent. The F-C assay relies on the transfer of electrons in alkaline medium from phenolic compounds to phosphomolybdic/phosphotungstic acid complexes, which are determined spectroscopically at 765 nm. Although the electron transfer reaction is not specific for phenolic compounds, the extraction procedure eliminates approximately 85% of ascorbic acid and other potentially interfering compounds. This assay is performed in microcentrifuge tubes and assessed in a 96-well plate reader. At least 64 samples can be processed in 1 d.

Electrically tunable excitonic light-emitting diodes based on monolayer WSe2 p-n junctions

The development of light-emitting diodes with improved efficiency, spectral properties, compactness and integrability is important for lighting, display, optical interconnect, logic and sensor applications. Monolayer transition-metal dichalcogenides have recently emerged as interesting candidates for optoelectronic applications due to their unique optical properties. Electroluminescence has already been observed from monolayer MoS2 devices. However, the electroluminescence efficiency was low and the linewidth broad due both to the poor optical quality of the MoS2 and to ineffective contacts. Here, we report electroluminescence from lateral p-n junctions in monolayer WSe2 induced electrostatically using a thin boron nitride support as a dielectric layer with multiple metal gates beneath. This structure allows effective injection of electrons and holes, and, combined with the high optical quality of WSe2, yields bright electroluminescence with 1,000 times smaller injection current and 10 times smaller linewidth than in MoS2 (refs 17,18). Furthermore, by increasing the injection bias we can tune the electroluminescence between regimes of impurity-bound, charged and neutral excitons. This system has the required ingredients for new types of optoelectronic device, such as spin- and valley-polarized light-emitting diodes, on-chip lasers and two-dimensional electro-optic modulators.

Optoelectronic devices based on electrically tunable p-n diodes in a monolayer dichalcogenide

The p-n junction is the functional element of many electronic and optoelectronic devices, including diodes, bipolar transistors, photodetectors, light-emitting diodes and solar cells. In conventional p-n junctions, the adjacent p- and n-type regions of a semiconductor are formed by chemical doping. Ambipolar semiconductors, such as carbon nanotubes, nanowires and organic molecules, allow for p-n junctions to be configured and modified by electrostatic gating. This electrical control enables a single device to have multiple functionalities. Here, we report ambipolar monolayer WSe2 devices in which two local gates are used to define a p-n junction within the WSe2 sheet. With these electrically tunable p-n junctions, we demonstrate both p-n and n-p diodes with ideality factors better than 2. Under optical excitation, the diodes demonstrate a photodetection responsivity of 210 mA W(-1) and photovoltaic power generation with a peak external quantum efficiency of 0.2%, promising values for a nearly transparent monolayer material in a lateral device geometry. Finally, we demonstrate a light-emitting diode based on monolayer WSe2. These devices provide a building block for ultrathin, flexible and nearly transparent optoelectronic and electronic applications based on ambipolar dichalcogenide materials.

Solar-energy conversion and light emission in an atomic monolayer p-n diode

The limitations of the bulk semiconductors currently used in electronic devices-rigidity, heavy weight and high costs--have recently shifted the research efforts to two-dimensional atomic crystals such as graphene and atomically thin transition-metal dichalcogenides. These materials have the potential to be produced at low cost and in large areas, while maintaining high material quality. These properties, as well as their flexibility, make two-dimensional atomic crystals attractive for applications such as solar cells or display panels. The basic building blocks of optoelectronic devices are p-n junction diodes, but they have not yet been demonstrated in a two-dimensional material. Here, we report a p-n junction diode based on an electrostatically doped tungsten diselenide (WSe2) monolayer. We present applications as a photovoltaic solar cell, a photodiode and a light-emitting diode, and obtain light-power conversion and electroluminescence efficiencies of ∼ 0.5% and ∼ 0.1%, respectively. Given recent advances in the large-scale production of two-dimensional crystals, we expect them to profoundly impact future developments in solar, lighting and display technologies.

Determination of total content of phenolic compounds and their antioxidant activity in vegetables--evaluation of spectrophotometric methods

This research studies in detail the contents of phenolic compounds determined by the Folin-Ciocalteu reagent and the antioxidant activities determined by the TEAC (Trolox equivalent antioxidant capacity), DPPH (using diphenyl-p-picrylhydrazyl radical), and FRAP (ferric reducing antioxidant power) methods, and their correlations for used standards with these methods (catechine, gallic acid, caffeic acid, ferulic acid, Trolox, ascorbic acid, and ferrous sulfate) and extracts from several species of commonly consumed vegetables were studied in detail. The comparison of absolute values of absorption coefficients for used standards and for individual methods allows one to choose optimal common standards for methods to be compared. The procedures applied for the same sets of the extracts using identical calibration procedures and common standards allowed better comparison of the results obtained by the TEAC, DPPH, and FRAP methods. The values of content of phenolic substances and total antioxidant activity of the sets of samples correlate very well for all used methods. The very high values of antioxidant activity were found in intensely colored vegetables (red cabbage, red onion, etc.), and the values were very low in watery vegetables such as potato, marrow, and cucumber.

Rapid determination of polyphenols and vitamin C in plant-derived products

Polyphenols, widely spread in our diet by the consumption of plant food products, are commonly determined using Folin-Ciocalteu reagent that interacts with other different reducing nonphenolic substances and leads to an overestimation of polyphenol content. In this paper we report an optimized Folin-Ciocalteu method to specifically determine the contents of total polyphenols and vitamin C. After the optimal conditions for the colorimetric assay were set, solid-phase extraction (Oasis HLB (hydrophilic-lipophilic balance)) was carried out to eliminate the water-soluble reducing interferences including vitamin C. Colorimetric correction was thus performed by subtracting interfering substances contained in the water washing extract from the raw extract. Moreover, vitamin C present in the water washing extract can be destroyed by heating and thus colorimetrically deduced. This procedure was set up with synthetic solutions and validated on different extracts from fruit products.

Artificial reductant enhancement of the Lowry method for protein determination

Addition of dithiothreitol in the Lowry procedure 3 min after adding the Folin-Ciocalteau reagent produces immediate color development, with 35 to 60% greater absorbance per mass of protein used.

Adherence of Candida albicans to denture-base materials with different surface finishes

OBJECTIVES

To assess the in vitro adherence of Candida albicans to heat-cured hard and soft denture-base materials with varying surface roughness, and to observe the effect of a mixed salivary pellicle on candidal adhesion to these surfaces.

METHODS

In vitro adhesion assays on heat-cured acrylic resin (Trevalon), Molloplast B and Novus using the type strain of C. albicans (NCPF 3153A). Surfaces for the assays were prepared using clinically appropriate rotary instruments. Unstimulated, pooled and clarified whole saliva was used to assess its effect on adhesion.

RESULTS

Significantly greater adhesion of C. albicans to rough rather than smooth surfaces was found (P < 0.001), as well as increased adhesion to the machined soft lining materials compared with acrylic. Pre-coating denture-base materials with saliva reduced candidal adhesion on all materials.

CONCLUSIONS

Rough surfaces on denture-base materials promote the adhesion of C. albicans in vitro. However, saliva reduces adhesion of C. albicans and thus diminishes the effect of surface roughness and free surface energy differences between materials.

Distribution of conjugated and free phenols in fruits: antioxidant activity and cultivar variations

Total and free phenolic contents of 16 commonly consumed fruits (comprising 9 apples, 4 pears, and one each of peach, plum, and kiwi fruit cultivars) were measured by Folin-Ciocalteu assay. Total phenol contents varied from 272 to 475 mg of CtE/100 g of fresh weight. Of the apple cultivars studied, Braeburn and Empire had the highest and lowest total phenol content, respectively. The apple cultivars ranked in the following decreasing order: Braeburn > Red Delicious > Crisp Pink > Granny Smith > Royal Gala > Bramley > Golden Delicious > Fuji > Empire. Among pear cultivars, the order was Forelle > Taylor's > Peckham's > Conference. Peach and plum equally had high contents. The percentage of conjugated phenolics ranged between 3 (Red Delicious) and 77% (Empire) of the total phenols. Comparison of different cultivars of the same fruit and between different fruits showed broad variations in both phenolic content and in vitro antioxidant activity; a weak correlation (R(2) = 0.58) was observed between the phenolic content of the fruits and the total antioxidant activity, as estimated by the FRAP assay. The calculated dietary intake of total, free, and conjugated phenols from average per capita consumption of apples and pears in different regions of the U.K. varied between 104-126, 53-64, and 51-62 mg of CtE/day, respectively.

Screening for antioxidant activity in edible plant products: comparison of low-density lipoprotein oxidation assay, DPPH radical scavenging assay, and Folin-Ciocalteu assay

Oxidation of low-density lipoprotein (LDL) has been implicated in atherogenesis. Antioxidants that prevent LDL from oxidizing may reduce atherosclerosis. This study investigated LDL antioxidant activity in edible plant products for development of dietary supplementation to prevent atherosclerosis. Fifty-two kinds of edible plants were extracted using 70% aqueous ethanol solution, and the antioxidant activity of the extracts, which inhibit human LDL oxidation induced by copper ion, was determined on the basis of the oxidation lag time and represented as epigallocatechin 3-gallate equivalent. 1,1-Diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity and total phenolic content were also measured for comparisons with antioxidant activity in LDL. Plant products showing the greatest activity in LDL oxidation assay were akamegashiwa (Mallotus japonicus) leaf, Japanese privet (Ligustrum japonicum) leaf, green tea [Camellia sinensis (L.) O. Kuntze], and astringent persimmon (Diospyros kaki). The present study revealed high levels of LDL antioxidant activity in plant products for which such activity levels are underestimated in the DPPH radical scavenging assay and Folin-Ciocalteu assay.

Anti-HIV-1 activity, toxicity, and stability studies of representative structural families of polyoxometalates

The anti-HIV-1 activity and toxicity of representative structural families of polyoxotungstates in human lymphocytes was determined. The 21 compounds examined include those derived from the following structural families: [NaSb9W21O86]18- (HPA-23), Xn+W12O40(8-n)- (Keggin), P2W18O62(6-) (Wells-Dawson), W6O19(2-) (Lindqvist), [NaP5W30O110]14- (Preyssler), and W10O32(4-) (decatungstate). The molecular architecture of each of these structural families is constituted principally by a network of bonds between d0 WVI and oxide ions. Of these, 10 show median effective concentration (EC50) values of approximately 1 microM and six have marked toxicity with a median inhibitory concentration (IC50) of less than 50 microM. Only compounds containing more than six metal atoms showed appreciable antiviral activity. Beyond this, however, no marked correlation existed between the molecular size, charge, or charge density of the polyoxometalates and their anti-HIV-1 activity. Examination of an exemplary class of polyoxotungstates, the phosphotungstates of formula A- and B-PW9O34(9-) under physiological conditions (buffered neutral aqueous media), illustrates that both isomers equilibrate rapidly to generate the same distribution of products and that this distribution depends principally on the buffer. These heretofore unappreciated complexities in the chemistry of these compounds under neutral aqueous conditions indicates interpretation or evaluation of these compounds in cell culture and other biological screens must be done with care.

Honeybee-collected pollen from five Portuguese Natural Parks: palynological origin, phenolic content, antioxidant properties and antimicrobial activity

The aim of this study was to determine the palynological origin, phenolic content, antioxidant and antimicrobial properties of pollen from five Portuguese Natural-Parks [Parque Nacional Peneda Gerês (PNPG); Parque Natural do Montesinho (PNM); Parque Natural do Alvão (PNA); Parque Natural da Serra da Estrela (PNSE) and Parque Natural do Douro Internacional (PNDI)]. Eight families were found in the mixture of bee pollen: Rosaceae, Cistaceae, Boraginaceae, Asteraceae, Fagaceae, Ericaeae, Myrtaceae and Fabaceae. The phenolic compounds content, determined by the Folin-Ciocalteu method, varied between 10.5 and 16.8 mg of gallic acid equivalents/g of extract (mg GAE/g) found in bee pollen from PNM and PNDI, respectively. The free radical scavenging measured showed the highest effective extract - PNM with EC(50) 2.16, followed by PND with 2.24 mg/mL. In the β-carotene bleaching assay the same behaviour as in the DPPH method was verified. We also verified that the presence of pollen differentially affected the growth of bacteria Gram-positive, Gram-negative and yeasts under study, depending this on the microorganism and the pollen used. This is an important study since, as far we know, it is the first time that Portuguese bee pollen from Natural Parks was studied, and their characterization can increase their economic value.

Effects of TiO2 surface modifications on photocatalytic oxidation of arsenite: the role of superoxides

Using TiO2 photocatalyst, arsenite [As(III)] can be rapidly oxidized to arsenate [As(V)], which is less toxic and less mobile in the aquatic environment. Superoxides have been recently proposed as a main photocatalytic oxidant of As(III) whereas OH radicals are dominant oxidants in most TiO2 photocatalytic oxidation (PCO) reactions. This study confirms that superoxides are mainly responsible for the As(III) PCO by investigating PCO kinetics in pure and modified TiO2 systems. The rate of As(III) oxidation drastically increased on Pt-TiO2, which could be ascribed to the enhanced superoxide generation through an efficient interfacial electron transfer from the conduction band (CB) to O2. Since the addition of tert-butyl alcohol (OH radical scavenger) had little effect on the PCO rate in both naked and Pt-TiO2 suspensions, OH radicals do not seem to be involved. The addition of polyoxometalates (POMs) as an electron shuttle between TiO2 CB and 02 highly promoted the PCO rate whereas the POM alone was not effective at all in oxidizing As(III). Fluorinated TiO2 that had a markedly reduced adsorptive capacity for As(III) did not show a reduced PCO rate, which indicates that the direct hole transfer path is not important. The arsenite oxidation proceeded under visible light with a similar rate to the case of Pt-TiO2/UV when dye-sensitized Pt-TiO2 was used. Since only superoxides can be generated as a photooxidant in this visible light system, their role as a main oxidant of As(III) is confirmed. In addition, the PCO rate was significantly reduced in the presence of superoxide dismutase.

The tungstate-stabilized tetramethylbenzidine reaction for light and electron microscopic immunocytochemistry and for revealing biocytin-filled neurons

A peroxidase reaction product that can be easily distinguished from standard diaminobenzidine (DAB) reaction products is needed for pre-embedding electron microscopic double-antibody labelling studies. Benzidine dihydrochloride (BDHC) and gold-substituted silver peroxidase reactions are unsatisfactory for double labelling because they lack sensitivity and reliability and/or compromise ultrastructure. We show here that light and electron microscopic immunocytochemistry can be done with a modification of the tungstate-stabilized tetramethylbenzidine (TMB) reaction (Weinberg and Van Eyck 1991) which yields a crystalline reaction product. With this method, we have obtained excellent immunolabelling for a variety of antigens, including tyrosine hydroxylase, enkephalin, serotonin, Fos protein and retrogradely transported cholera toxin B subunit (CTB). The TMB-tungstate reaction is useful for ultrastructural double labelling because the crystals contrast well with the amorphous product of diaminobenzidine reactions. The TMB-tungstate reaction is more sensitive and reliable for immunocytochemistry than the benzidine dihydrochloride reaction and gives better ultrastructure than the gold-substituted silver peroxidase reaction. We also show that neurons filled with biocytin by intracellular injection can be visualized with TMB-tungstate for either light (LM) or electron (EM) microscopy.

A tetramethylbenzidine/tungstate reaction for horseradish peroxidase histochemistry

Tracing of neuroanatomical pathways commonly involves the histochemical demonstration of horseradish peroxidase, using the chromogen tetramethylbenzidine. A new modification of this reaction using ammonium paratungstate stabilizer retains high sensitivity while permitting the reaction to be performed at pH 6.0 in isotonic solutions. The reaction product resists solvents, allowing Nissl-stained sections to retain their peroxidase labeling. With subsequent stabilization by diaminobenzidine, the tissue is suitable for electron microscopic study and is compatible with post-embedding immunocytochemistry.

Dimethyl sulfoxide reductase activity by anaerobically grown Escherichia coli HB101

Escherichia coli grew anaerobically on a minimal medium with glycerol as the carbon and energy source and dimethyl sulfoxide (DMSO) as the terminal electron acceptor. DMSO reductase activity, measured with an artificial electron donor (reduced benzyl viologen), was preferentially associated with the membrane fraction (77 +/- 10% total cellular activity). A Km for DMSO reduction of 170 +/- 60 microM was determined for the membrane-bound activity. Methyl viologen, reduced flavin mononucleotide, and reduced flavin adenine dinucleotide also served as electron donors for DMSO reduction. Methionine sulfoxide, a DMSO analog, could substitute for DMSO in both the growth medium and in the benzyl viologen assay. DMSO reductase activity was present in cells grown anaerobically on DMSO but was repressed by the presence of nitrate or by aerobic growth. Anaerobic growth on DMSO coinduced nitrate, fumarate, and and trimethylamine-N-oxide reductase activities. The requirement of a molybdenum cofactor for DMSO reduction was suggested by the inhibition of growth and a 60% reduction in DMSO reductase activity in the presence of 10 mM sodium tungstate. Furthermore, chlorate-resistant mutants chlA, chlB, chlE, and chlG were unable to grow anaerobically on DMSO. DMSO reduction appears to be under the control of the fnr gene.

Comparison of five methods for determination of total plasma protein concentration

Quantitation of exact total protein content is often a key step and is common to many applications in general biochemistry research and routine clinical laboratory practice. Before embarking on any type of protein analysis, particularly comparative techniques, it is important to accurately quantitate the amount of protein in the sample. In order to assess the quality of total protein estimation results, five methods were tested and were applied to the same pooled plasma sample. For this aim, Bradford (Coomassie Brilliant Blue), Lowry (Folin-Ciocalteau), Biüret, Pesce and Strande (Ponceau-S/TCA), and modified method of Schaffner-Weismann (Amido Black 10B) were used. The last two methods employ simultaneous precipitation of proteins with the acid containing dye solutions followed by dissolution of precipitate in a NaOH solution. It is shown that each assay has advantages and disadvantages relative to sensitivity, ease of performance, acceptance in literature, accuracy and reproducibility/coefficient of variation. All of the methods tested show a CV %<6. Besides pooled plasma, a known concentration of human serum albumin was also analyzed and discussed by means of standardization of plasma total protein content.

Gastric mucosal injury in the rat. Role of iron and xanthine oxidase

Recent studies have implicated oxygen free radicals in ischemia-reperfusion injury to the gastric mucosa. The aims of the present study were to test the hypothesis that the enzyme xanthine oxidase is the source of the oxygen radicals in the ischemic stomach and determine the importance of the iron-catalyzed Haber-Weiss reaction in generating the cytotoxic oxygen radicals. Gastric mucosal clearance of 51Cr-labeled red blood cells was measured during a 30-min control period, a 30-min ischemic period (hemorrhage to 25 mmHg arterial pressure), and a 60-80-min reperfusion period (reinfusion of shed blood). In untreated (control) rats, a dramatic rise (100-fold) in the leakage of 51Cr-labeled red blood cells into the gastric lumen was observed only during the reperfusion period. After the reperfusion period, gastric mucosal damage was further assessed using gross lesion area and histology. Rats were placed on a sodium tungstate diet (to inactivate xanthine oxidase), or treated with either deferoxamine (an iron chelating agent) or superoxide dismutase (a superoxide scavenger). All three interventions substantially reduced 51Cr-labeled red blood cell clearance and gross lesion area relative to untreated rats. However, tissue injury assessed histologically was similar in both treated and untreated animals. The results of this study support the hypothesis that oxygen free radicals mediate the hemorrhagic shock-induced extravasation of red blood cells. The data also indicate that xanthine oxidase is the source of the oxy-radicals and that the iron-catalyzed Haber-Weiss reaction is largely responsible for hydroxyl radical generation in this model.

WENDI: an improved neutron rem meter

Neutron rem meters are routinely used for real-time field measurements of neutron dose equivalent where neutron spectra are unknown or poorly characterized. These meters are designed so that their response per unit fluence approximates an appropriate fluence-to-dose conversion function. Typically, a polyethylene moderator assembly surrounds a thermal neutron detector, such as a BF3 counter tube. Internal absorbers may also be used to further fine-tune the detector response to the shape of the desired fluence conversion function. Historical designs suffer from a number of limitations. Accuracy for some designs is poor at intermediate energies (50 keV-250 keV) critical for nuclear power plant dosimetry. The well-known Andersson-Braun design suffers from angular dependence because of its lack of spherical symmetry. Furthermore, all models using a pure polyethylene moderator have no useful high-energy response, which makes them inaccurate around high-energy accelerator facilities. This paper describes two new neutron rem meter designs with improved accuracy over the energy range from thermal to 5 GeV. The Wide Energy Neutron Detection Instrument (WENDI) makes use of both neutron generation and absorption to contour the detector response function. Tungsten or tungsten carbide (WC) powder is added to a polyethylene moderator with the expressed purpose of generating spallation neutrons in tungsten nuclei and thus enhance the high-energy response of the meter beyond 8 MeV. Tungsten's absorption resonance structure below several keV was also found to be useful in contouring the meter's response function. The WENDI rem meters were designed and optimized using the Los Alamos Monte Carlo codes MCNP, MCNPX, and LAHET. A first generation prototype (WENDI-I) was built in 1995 and its testing was completed in 1996. This design placed a BF3 counter in the center of a spherical moderator assembly, whose outer shell consisted of 30% by weight WC in a matrix of polyethylene. A borated silicone rubber (5% boron by weight) absorber covered an inner polyethylene sphere to control the meter's response at intermediate energies. A second generation design (WENDI-II) was finalized and tested in 1999. It further extended the high-energy response beyond 20 MeV, increased sensitivity, and greatly facilitated the manufacturing process. A 3He counter tube is located in the center of a cylindrical polyethylene moderator assembly. Tungsten powder surrounds the counter tube at an inner radius of 4 cm and performs the double duty of neutron generation above 8 MeV and absorption below several keV. WENDI-II is suitable for field use as a portable rem meter in a variety of work place environments, and has been recently commercialized under license by Eberline Instruments, Inc. and Ludlum Measurements, Inc. Sensitivity is about a factor of 12 higher than that of the Hankins Modified Sphere (Eberline NRD meter) in a bare 252Cf field. Additionally, the energy response for WENDI-II closely follows the contour of the Ambient Dose Equivalent per unit fluence function [H'(10)/phi] above 0.1 MeV. Its energy response at 500 MeV is approximately 15 times higher than that of the Hankins and Andersson-Braun meters. Measurements of the energy and directional response of the improved meter are presented and the measured response function is shown to agree closely with the predictions of the Monte Carlo simulations in the range from 0.144 MeV to 19 MeV.

Suppression of scrapie infection in mice by heteropolyanion 23, dextran sulfate, and some other polyanions

Studies of polyanions that suppress scrapie have been done to pinpoint the cell types in the lymphoreticular system which are important in pathogenesis and to suggest possible prophylactic or therapeutic strategies for the unconventional slow viruses. A regime of three daily injections of the inorganic heteropolyanion HPA-23 reduced the effective scrapie dose by more than 99%; i.e., some mice survived peripherally injected doses of 100 50% lethal dose units. The effect was greatest when the first dose of HPA-23 was given 4 h after injecting scrapie, but it declined rapidly as this interval was increased, and there was virtually no effect 2 days after infection. A single dose of high-molecular-weight organic polyanions such as carrageenan or dextran sulfate (DS-500) greatly reduced (i.e., greater than 99%) the efficiency of scrapie infection. In contrast to HPA-23, DS-500 was equally effective whether given 4 days before or 8 h after the time of infection. The antiscrapie effect of DS-500 appeared to be independent of its activity as a B-cell mitogen and of its ability to produce a cytotoxic blockade of phagocytic cells. DS-500 probably caused the aggregation and loss from blood of scrapie inoculum which was present immediately after injection, but it had additional effects on scrapie at later times.