MUTANT GENE THAT CHANGES PROTEIN COMPOSITION AND INCREASES LYSINE CONTENT OF MAIZE ENDOSPERM

Preliminary tests have shown that the endosperms of maize seeds homozygous for the opaque-2 mutant gene have a higher lysine content than normal kernels. As a critical test, a backcross progeny was divided into opaque-2 and normal kernels, the endosperms separated, and the amino acids determined. The opaque-2 endosperms had a different amino acid pattern and 69 percent more lysine than the normal seeds. The major reason for these changes is the synthesis of proteins with a greater content of basic amino acids in the acid-soluble fraction of the mutant endosperm. This is accompanied by a reduction in the ratio of zein to glutelin.

The prolamin storage proteins of cereal seeds: structure and evolution

Images

Structural characterization, formation mechanism and stability of curcumin in zein-lecithin composite nanoparticles fabricated by antisolvent co-precipitation

Curcumin (Cur) exhibits a range of bioactive properties, but its application is restrained due to its poor water solubility and sensitivity to environmental stresses. In this study, zein-lecithin composite nanoparticles were fabricated by antisolvent co-precipitation technique for delivery of Cur. The result showed that the encapsulation efficiency of Cur was significantly enhanced from 42.03% in zein nanoparticles to 99.83% in zein-lecithin composite nanoparticles. The Cur entrapped in the nanoparticles was in an amorphous state confirmed by differential scanning calorimetry and X-ray diffraction. Fourier transform infrared analysis revealed that hydrogen bonding, electrostatic interaction and hydrophobic attraction were the main interactions among zein, lecithin, and Cur. Compared with single zein and lecithin nanoparticles, zein-lecithin composite nanoparticles significantly improved the stability of Cur against thermal treatment, UV irradiation and high ionic strength. Therefore, zein-lecithin composite nanoparticles could be a potential delivery system for water-insoluble bioactive compounds with enhanced encapsulation efficiency and chemical stability.

The primary structure of a plant storage protein: zein

The protein sequence of a representative of the zeins, the major storage proteins of maize, has been derived from the nucleotide sequence of a zein cDNA clone. This cDNA was sequence both by the Maxam and Gilbert and the M13-dideoxy techniques. The nucleotide sequence encompasses the non-translated 3' terminus of the mRNA, the entire coding sequence specifying both the mature zein protein and a small signal peptide, and a portion of the non-translated 5' region. The deduced amino acid composition and the amino-terminal amino acid sequence closely resemble those derived from chemical analysis of the zein protein fraction. The data presented represent the first complete amino acid sequence of a plant storage protein.

Soft-tissue venous malformations in children: percutaneous sclerotherapy with Ethibloc

Thirty-eight children with soft-tissue venous malformations (VMs) were treated with percutaneous injection of a new fibrosing agent (Ethibloc). The technique, results, side effects, and complications are detailed. Direct puncture of the VM allows evaluation of the draining venous system and direct injection of Ethibloc. This procedure alone or associated with surgery led to achievement of good or excellent results in 74% of the cases (complete cure in 50%), with minimal side effects and no major complications.

Physico-chemical characterization of carvacrol loaded zein nanoparticles for enhanced anticancer activity and investigation of molecular interactions between them by molecular docking

Carvacrol (CV), a monoterpene possesses wide range of biological activities but has limited application due to low aqueous solubility and poor bioavailability. To address this issue and enhance bioavailability and efficacy of carvacrol, lecithin stabilized zein nanoparticles were investigated. Precipitation method was used for synthesis of nanoparticles and characterized using various techniques. CV entrapped under optimized parameters has size around 250 nm with -15 mV zeta potential. SEM studies showed nanoparticles with spherical morphology and size in accordance with DLS studies. FTIR, NMR and DSC were used to determine the molecular interaction between CV and lecithin stabilized zein nanoparticles. Molecular docking studies were performed to understand the interaction between protein and drug at molecular level. Our results demonstrated the presence of two active sites within zein, showing strong binding interactions with carvacrol. The encapsulation efficiency of 78% with loading efficiency of 13% was obtained as per HPLC and UV-Vis studies. Cytotoxicity assay indicated that the CV loaded nanoparticles induce cytotoxicity against colon cancer (SW480) cells further confirmed by acridine orange and ethidium bromide dual staining assay. Fluorescent tagged nanoparticles revealed significant cellular uptake of drug. Our results suggest that CV can be conveniently delivered via oral route after incorporating into lecithin stabilized zein nanoparticles and may prove effective for colon cancer treatment.

Development of flexible antimicrobial packaging materials against Campylobacter jejuni by incorporation of gallic acid into zein-based films

In this study, antimicrobial films were developed against Campylobacter jejuni by incorporation of gallic acid (GA) into zein-based films. The zein and zein-wax composite films containing GA between 2.5 and 10 mg/cm(2) were effective on different C. jejuni strains in a concentration-dependent manner. Zein and zein-wax composite films showed different release profiles in distilled water but quite similar release profiles at solid agar medium. Depending on incorporated GA concentration, 60-80% of GA released from the films, while the remaining GA was bound or trapped by film matrix. The GA at 2.5 and 5 mg/cm(2) caused a considerable increase in elongation (57-280%) of all zein films and eliminated their classical flexibility problems. The zein-wax composite films were less flexible than zein films, but the films showed similar tensile strengths and Young's modulus. Scanning electron microscopy indicated different morphologies of zein and zein-wax composite films. This study clearly showed the good potential of zein and GA to develop flexible antimicrobial films against C. jejuni.

Silver Nanocluster-Embedded Zein Films as Antimicrobial Coating Materials for Food Packaging

Highly efficient antimicrobial agents with low toxicity and resistance have been enthusiastically pursued to address public concerns on microbial contamination in food. Silver nanoclusters (AgNCs) are known for their ultrasmall sizes and unique optical and chemical properties. Despite extensive studies of AgNCs for biomedical applications, previous research on their application as antimicrobials for food applications is very limited. Here, for the first time, by incorporating AgNCs (∼2 nm in diameter) into zein films that are widely used as food packaging materials, we developed a novel coating material with potent antimicrobial activity, low toxicity to human cells, and low potential to harm the environment. In addition, we systematically evaluated the antimicrobial activities and cytotoxicity of AgNCs-embedded zein films and compared them to zein films embedded with AgNO₃ or Ag nanoparticles with diameters of 10 and 60 nm (AgNP10 and AgNP60, respectively). At equivalent silver concentrations, AgNCs and AgNO₃ solutions exhibited considerably higher antimicrobial activities than those of AgNP10 and AgNP60 solutions. Moreover, AgNCs exhibited less cytotoxicity to human cells than AgNO₃, with a half maximal inhibitory concentration (IC₅₀) of 34.68 μg/mL for AgNCs, compared to 9.14 μg/mL for AgNO₃. Overall, the novel AgNCs coating developed in this research has great potential for antimicrobial applications in food packaging materials due to its high antimicrobial efficacy, ultrasmall size, and low cytotoxicity.

Spray-dried zein capsules with coencapsulated nisin and thymol as antimicrobial delivery system for enhanced antilisterial properties

Food grade antimicrobial delivery systems were studied in this work to enhance the effectiveness of antimicrobials inhibiting the growth of Listeria monocytogenes during storage. Corn zein was used as a carrier biopolymer and nisin and thymol as antimicrobials. Capsules produced by spray drying demonstrated different microstructures and release characteristics of nisin at different usage levels of thymol. Better release profiles were achieved when glycerol was additionally used to prepare capsules. Capsules showing sustained release of significant amounts of both antimicrobials effectively inhibited the growth of L. monocytogenes at pH 6.0 and 30 °C in the growth medium. Capsules were also more effective than free antimicrobials in inhibiting the growth of L. monocytogenes in 2% reduced fat milk at 25 °C. Our work showed that engineered delivery systems have promise to fulfill the antimicrobial effectiveness during shelf life storage of foods to ensure microbiological safety.

The treatment of capillary-venous malformations using a new fibrosing agent

We present our early experience in the treatment of cutaneous capillary-venous malformations using a new fibrosing agent called Ethibloc. Superselective angiography was used to delineate the vascular anomaly and effect temporary occlusion. Whenever possible, compression of venous outflow also was used, while the sclerosing agent was injected directly into the malformation by percutaneous puncture. Sixteen patients with capillary-venous malformations have been treated with this agent since 1979. A mild local inflammatory reaction was noted in some cases; there were no instances of skin necrosis. In 10 patients, the fibrosed vascular malformation was excised, and in 6 patients, the area of vascular anomaly decompressed to such a degree that resection was unnecessary.

Delivery of curcumin using a zein-xanthan gum nanocomplex: Fabrication, characterization, and in vitro release properties

This study aimed to use xanthan gum as a stabilizer to improve the stability of zein nanoparticles. Zein-xanthan gum composite nanoparticles were prepared via anti-solvent precipitation at pH 4.0. The particle size, zeta potential, and stability of the system were related to the amount of xanthan gum added. When 20 mg of xanthan gum was added, spherical nanoparticles with a small particle size (179 ± 2.1 nm) and sufficient negative zeta potential (-42 ± 1.6 mV) were obtained. The zeta potential and Fourier transform infrared spectroscopy results indicated that electrostatic attraction was the main driving force, followed by hydrogen bonding and hydrophobic interactions. Composite nanoparticles were coated by xanthan gum and remained stable over a wide pH range and at high temperatures and salt concentrations; they did not precipitate or aggregate after 30 days of storage. Moreover, the addition of xanthan gum considerably improved the encapsulation efficiency and loading capacity of nanoparticles containing high curcumin amounts, which facilitated slow and sustained release of curcumin in simulated intestinal fluid. Therefore, zein-xanthan gum nanoparticles can be used for the delivery of biologically active compounds in food and pharmaceutical preparations.

Plant protein-based hydrophobic fine and ultrafine carrier particles in drug delivery systems

For thousands of years, plants and their products have been used as the mainstay of medicinal therapy. In recent years, besides attempts to isolate the active ingredients of medicinal plants, other new applications of plant products, such as their use to prepare drug delivery vehicles, have been discovered. Nanobiotechnology is a branch of pharmacology that can provide new approaches for drug delivery by the preparation of biocompatible carrier nanoparticles (NPs). In this article, we review recent studies with four important plant proteins that have been used as carriers for targeted delivery of drugs and genes. Zein is a water-insoluble protein from maize; Gliadin is a 70% alcohol-soluble protein from wheat and corn; legumin is a casein-like protein from leguminous seeds such as peas; lectins are glycoproteins naturally occurring in many plants that recognize specific carbohydrate residues. NPs formed from these proteins show good biocompatibility, possess the ability to enhance solubility, and provide sustained release of drugs and reduce their toxicity and side effects. The effects of preparation methods on the size and loading capacity of these NPs are also described in this review.

Biomaterials for Tissue Engineering Applications and Current Updates in the Field: A Comprehensive Review

Tissue engineering has emerged as an interesting field nowadays; it focuses on accelerating the auto-healing mechanism of tissues rather than organ transplantation. It involves implanting an In Vitro cultured initiative tissue or a scaffold loaded with tissue regenerating ingredients at the damaged area. Both techniques are based on the use of biodegradable, biocompatible polymers as scaffolding materials which are either derived from natural (e.g. alginates, celluloses, and zein) or synthetic sources (e.g. PLGA, PCL, and PLA). This review discusses in detail the recent applications of different biomaterials in tissue engineering highlighting the targeted tissues besides the in vitro and in vivo key findings. As well, smart biomaterials (e.g. chitosan) are fascinating candidates in the field as they are capable of elucidating a chemical or physical transformation as response to external stimuli (e.g. temperature, pH, magnetic or electric fields). Recent trends in tissue engineering are summarized in this review highlighting the use of stem cells, 3D printing techniques, and the most recent 4D printing approach which relies on the use of smart biomaterials to produce a dynamic scaffold resembling the natural tissue. Furthermore, the application of advanced tissue engineering techniques provides hope for the researchers to recognize COVID-19/host interaction, also, it presents a promising solution to rejuvenate the destroyed lung tissues.

Direct Ethibloc injection in benign bone cysts: preliminary report on four patients

Benign bone cysts often require treatment in order to prevent pathological fracture. We report preliminary experience with percutaneous injection of Ethibloc in four children (8-15 years old) presenting with benign bone cysts: two were aneurysmal bone cysts, two were unicameral bone cysts. All the patients were followed up for 12-18 months. Healing was satisfactory in all cases and no complications occurred.

Segmental occlusion of the pancreatic duct with prolamine to prevent fistula formation after distal pancreatectomy

OBJECTIVE

The authors used prolamine (Ethibloc, Ethicon GmBH, Norderstedt, Germany) for segmental obstruction of the pancreatic duct to prevent pancreatic fistula development after distal pancreatectomy combined with total gastrectomy for gastric malignancies.

SUMMARY BACKGROUND DATA

Although the initial clinical application of prolamine was pancreatic duct obstruction for patients with pancreatitis and undergoing pancreatic transplantation and pancreaticoduodenectomy for pancreatic cancer, there are no reports on prevention of pancreatic fistula formation after distal pancreatectomy.

METHODS

Prolamine (0.2 mL) was injected into the distal segment of the main duct in the remaining pancreata of 51 patients. Small pancreatic ducts on the cut surface, from which prolamine extravasates, were closed by ligation, the main duct was ligated doubly, and the transected pancreatic margin was closed 15 minutes after phenylpropanolamine hydrochloride injection.

RESULTS

No patient developed a pancreatic fistula or the complication of arterial bleeding due to prolonged infection.

CONCLUSION

Segmental obstruction of the pancreatic duct with prolamine is useful for preventing pancreatic fistula development after distal pancreatectomy.

Fistuloscopy--an adjuvant technique for sealing gastrointestinal fistulae

Endoscopic occlusion of gastrointestinal fistulae can be successfully achieved in a high percentage of patients. In cases where the intestinal opening of the fistula is not accessible, such treatment was hitherto impracticable. Fistuloscopy is a new technique which we have devised, using a flexible endoscope advanced percutaneously along the fistula tract to seal these gastrointestinal fistulae. Eleven out of 17 enterocutaneous fistulae and 5 out of 8 abscesses could be sealed using this technique. The complications in this series were all caused by fibrin glue injection into the fistulae under pressure. One patient died of an air embolism. Provided that elevation of the air pressure in the fistula system is strictly avoided, fistuloscopy is a safe and potent method of occluding gastrointestinal fistulae, which otherwise need prolonged conservative treatment or hazardous surgical intervention.

Zein based-nanoparticles loaded botanical pesticides in pest control: An enzyme stimuli-responsive approach aiming sustainable agriculture

Nanoencapsulation of biopesticides is an important strategy to increase the efficiency of these compounds, reducing losses and adverse effects on non-target organisms. This study describes the preparation and characterisation of zein nanoparticles containing the botanical compounds limonene and carvacrol, responsive to proteolytic enzymes present in the insects guts. The spherical nanoparticles, prepared by the anti-solvent precipitation method, presented in the nanoparticle tracking analysis (NTA) a concentration of 4.7 × 10¹² ± 1.3 × 10¹¹ particles.mL^-1 and an average size of 125 ± 2 nm. The formulations showed stability over time, in addition to not being phytotoxic to Phaseolus vulgaris plants. In vivo tests demonstrated that formulations of zein nanoparticles containing botanical compounds showed higher mortality to Spodoptera frugiperda larvae. In addition, the FTIC probe (fluorescein isothiocyanate) showed wide distribution in the larvae midgut, as well as being identified in the feces. The trypsin enzyme, as well as the enzymatic extract from insects midgut, was effective in the degradation of nanoparticles containing the mixture of botanical compounds, significantly reducing the concentration of nanoparticles and the changes in size distribution. The zein degradation was confirmed by the disappearance of the protein band in the electrophoresis gel, by the formation of the lower molecular weight fragments and also by the greater release of FTIC after enzymes incubation. In this context, the synthesis of responsive nanoparticles has great potential for application in pest management, increasing the selectivity and specificity of the system and contributing to a more sustainable agriculture.

Venous malformations in the face and neck. Radiologic diagnosis and treatment with absolute ethanol

Venous malformations in the face and neck have a characteristic clinical picture. They consist of a cluster of venous cavities with a very slow blood flow and are normally not demonstrated at conventional external carotid angiography. Previous methods of treatment have been of limited value but recently good results have been reported with instillation of fibrosing agents as Ethibloc and ethanol. Five patients with facial venous malformations were referred for therapy. External carotid angiography was performed and was almost normal in all patients. Superselective catheterization demonstrated the malformation clearly in 2 patients only. Direct puncture phlebography confirmed the diagnosis by demonstrating the venous cavities in all the patients. This procedure was concluded by instillation of absolute ethanol into the cavities. There was a marked reduction in size of the malformation but it was not permanently completely occluded. The treatment was repeated in 4 patients with further reduction of the size, but small remnants are still left. Serious complications with extensive soft tissue necrosis occurred in one patient probably as a result of extravasation of ethanol. The necrosis later healed well after surgical treatment. Instillation of ethanol under radiologic control seems to be a promising way of treatment of venous malformations.

Preparation of plastic and biopolymer multilayer films by plasma source ion implantation

The plasma source ion implantation (PSII) technique was used to improve the adhesion between linear low-density polyethylene (LLDPE) and biopolymer. LLDPE was treated with the PSII using O(2) or CF(4) gas to modify its surface. After modification, chitosan or corn zein was used for coating on LLDPE. Wettability of the LLDPE surface was evaluated with a contact angle meter by the sessile drop method. X-ray photoelectron spectroscopy (XPS) was used to analyze the LLDPE surface. Before and after treatment, in the case of LLDPE treated with O(2) PSII, oxygen-containing functional groups were formed on the implanted surface. In the CF(4) PSII treated LLDPE, it was observed that the fluorine concentration on the surface of LLDPE remarkably increased and hydrophobic groups were formed by chemical reaction. Bilayer films coated with chitosan or corn zein showed 10 times lower oxygen permeability. Tensile strength of multilayer films was decreased a little compared with that of LLDPE. The plastic and biopolymer multilayer films have potential for food packaging application because of their O(2) gas barrier property and easy recyclability of the multilayer film.

Prolonged survival following palliative renal tumor embolization by capillary occlusion

Nine patients with renal cell carcinoma and severe hematuria were palliatively treated with a new type of angioocclusion: the concept of capillary embolization. The so-called occlusion gel Ethibloc was used as embolizing agent. Each patient was followed up until death or for at least 4 years. All patients had a stage T3 or T4 tumor, 3 patients had metastases to multiple organs, 3 had lung metastases, and 3 were free of metastatic disease. In all cases, very high volumes (14-40 ml) of the embolizing agent were necessary to achieve total occlusion of the entire arterial compartment. Patients without metastatic disease had a mean survival time of 6 years and 4 months, all of them without signs of malignant disease. Patients with metastases had a mean survival time of 3 years. Compared with the natural history of renal cell carcinoma treated otherwise, this represents a substantial prolongation of survival time. Contrary to other angioocclusive treatment modalities, the concept of capillary occlusion with Ethibloc seems to achieve total tumor destruction.

Use of Ethibloc in the treatment of cystic and venous angiomas in children. 19 cases

The authors report the use of Ethibloc in the treatment of cystic lymphangiomas and venous angiomas in 19 children. This embolizing product is injected by puncture in situ. Ten cystic lymphangiomas were treated, including 7 of the cervico-facial region. Of these ten, 8 were embolized initially using Ethibloc, and 2 after surgery. The diagnosis was always confirmed by echography and in some cases also by scanner. Six were completely cured and 2 had partial but satisfactory results requiring further injections. The final 2 cases when Ethibloc was administered after surgery, gave very disappointing results as the residual lesion was microcystic and thus difficult to access for the Ethibloc injection. The 9 venous angiomas involved various regions, including 5 facial lesions. These angiomas required a more extensive blood-clotting and radiologic assessment: standard radiography to detect the clot, Doppler echography and M.R.I. precisely clarifying the exact extension in depth. For 6 patients the cure was complete, for 2 others the results were good. Finally, in 1 case Ethibloc embolization was carried out prior to surgery, allowing definitive cure. In all, this technique resulted in a complete cure in 2/3 of the cases and its simplicity makes it a seemingly interesting alternative to surgery.

Recent advances in biopolymer-based advanced oxidation processes for dye removal applications: A review

Over the past few years, synthetic dye-contaminated wastewater has attracted considerable global attention due to the low biodegradability and the ability of organic dyes to persist and remain toxic, causing numerous health and environmental concerns. As a result of the recalcitrant nature of those complex organic dyes, the remediation of wastewater using conventional wastewater treatment techniques is becoming increasingly challenging. In recent years, advanced oxidation processes (AOPs) have emerged as a potential alternative to treat organic dyestuffs discharged from industries. The most widely employed AOPs include photocatalysis, ozonation, Fenton oxidation, electrochemical oxidation, catalytic heterogeneous oxidation, and ultrasound irradiation. These processes involve the generation of highly reactive radicals to oxidize organic dyes into innocuous minerals. However, many conventional AOPs suffer from several setbacks, including the high cost, high consumption of reagents and substrates, self-agglomeration of catalysts, limited reusability, and the requirement of light, ultrasound, or electricity. Therefore, there has been significant interest in improving the performance of conventional AOPs using biopolymers and heterogeneous catalysts such as metal oxide nanoparticles (MONPs). Biopolymers have been widely considered in developing green, sustainable, eco-friendly, and low-cost AOP-based dye removal technologies. They inherit intriguing properties like biodegradability, renewability, nontoxicity, relative abundance, and sorption. In addition, the immobilization of catalysts on biopolymer supports has been proven to possess excellent catalytic activity and turnover numbers. The current review provides comprehensive coverage of different AOPs and how efficiently biopolymers, including cellulose, chitin, chitosan, alginate, gelatin, guar gum, keratin, silk fibroin, zein, albumin, lignin, and starch, have been integrated with heterogeneous AOPs in dye removal applications. This review also discusses the general degradation mechanisms of AOPs, applications of biopolymers in AOPs and the roles of biopolymers in AOPs-based dye removal processes. Furthermore, key challenges and future perspectives of biopolymer-based AOPs have also been highlighted.