Effect of calcination on minimally processed recycled zirconia powder derived from milling waste

OBJECTIVE

To assess the influence of calcination process on the properties of minimally processed recycled 3Y-TZP, and to compare it with its commercial counterpart.

METHODS

Non-milled 3Y-TZP waste was collected, fragmented and ball-milled to a granulometric < 5 µm. Half of the recycled powder was calcined at 900 °C. Recycled 3Y-TZP disks were uniaxially pressed and sintered to create two recycled groups: 1) Calcined and 2) Non-calcined to be compared with a commercial CAD/CAM milled 3Y-TZP. The microstructure of experimental groups was assessed through density (n = 6), scanning electron microscopy (n = 3) and energy-dispersive X-ray spectroscopy (n = 3); and the crystalline content was evaluated through X-ray diffraction (XRD) (n = 3). Optical and mechanical properties were investigated through reflectance tests (n = 10), and Vickers hardness, fracture toughness (n = 5), and biaxial flexural strength tests (n = 16), respectively. Fractographic analysis was performed to identify fracture origin and crack propagation. Statistical analyses were performed through ANOVA followed by Tukey´s test, and by Weibull statistics.

RESULTS

Particle size distribution of recycled powder revealed an average diameter of ∼1.60 µm. The relative density of all experimental groups was > 98.15 % and XRD analysis exhibited a predominance of tetragonal-phase in both recycled groups, which were similar to the crystallographic pattern of the control group. Cross-section micrographs presented flaws on the non-calcined group, and a more homogeneous microstructure for the calcined and commercial groups. Commercial samples showed lower contrast-ratio and higher translucency-parameter than the recycled groups, where non-calcined presented higher translucency-parameter and lower contrast-ratio than its calcined counterpart. The commercial group presented higher fracture toughness and characteristic strength than the recycled groups. Moreover, the calcined group exhibited higher hardness, characteristic strength, and probability of survival at higher loads than the non-calcined group. Fractographic analysis depicted the presence of microstructural flaws in the non-calcined group, which may have acted as stress-raisers and led to failures at lower flexural strengths values.

SIGNIFICANCE

The calcination process improved the microstructure, optical, and mechanical properties of the recycled 3Y-TZP.

Investigation of the Relationship between Surface Features, Protein Adsorption, and Osteoimmunomodulation: The Case of a Chemically Treated Titanium Alloy

This paper deals with the combined effects of immune response and osseointegration because of the lack of comprehensive studies on this topic. An antibacterial Ti surface was considered because of the high risk of infection for titanium bone implants. A chemically treated Ti6Al4 V alloy [Ti64(Sr-Ag)] with a microporous and Sr-Ag doped surface was compared to a polished version (Ti64) regarding protein adsorption (albumin and fibronectin) and osteoimmunomodulation. Characterization via fluorescence microscopy and zeta potential showed a continuous fibronectin layer on Ti64(Sr-Ag), even with preadsorbed albumin, while it remained filamentous on Ti64. Macrophages (differentiated from THP-1 monocytes) were cultured on both surfaces, with viability and cytokine release analyzed. Differently from Ti64, Ti64(Sr-Ag) promoted early anti-inflammatory responses and significant downregulation of VEGF. Ti64(Sr-Ag) also enhanced human bone marrow mesenchymal cell differentiation toward osteoblasts, when a macrophage-conditioned medium was used, influencing ALP production. Surface properties in relation to protein adsorption and osteoimmunomodulation were discussed.

The influence of vulnerability on depression among Japanese university athletes

Objective

This study examined the estimated causal relationship between vulnerability and depressive symptoms in Japanese university athletes and how the degree of vulnerability affects depressive symptoms.

Materials and methods

In Study 1, 248 Japanese university athletes completed a continual survey from Time 1 to Time 3. In Study 2, 562 Japanese university athletes responded to another survey during the same period. Structural equation modeling was performed to estimate the causal relationship using the cross-lagged effects model for the three waves. Next, a binomial logistic regression analysis was performed to examine the influence of vulnerability on depression.

Results

Results of the cross-lagged effects model showed that all paths from vulnerability to depressive symptoms were significant, and all paths from depressive symptoms to vulnerability were not significant. Thus, vulnerability was the causative variable and depressive symptoms were the outcome variables within the causal relationship. The logistic regression results showed that those with high vulnerability were 1.7 times more likely to have moderate or higher depressive symptoms than those with low vulnerability. Vulnerable individuals are at a higher risk for developing depressive symptoms. By verifying the causal relationship between vulnerability and depressive symptoms, we can contribute to the enhancement of mental health care in accordance with the weakest link model. Appropriate psychological support for athletes can decrease depression and improve their mental health.

Effect of High-radiant Emittance and Short Curing Time on Polymerization Shrinkage Vectors of Bulk Fill Composites

PURPOSE

To evaluate the effect of short curing time using a high-radiant emittance light on polymerization shrinkage vectors in different consistency bulk-fill composites (BFRCs) using micro-computed tomography.

METHODS AND MATERIALS

Radiopaque zirconia fillers were homogeneously incorporated and functioned as radiopaque tracers into two regular-paste: TBFill (Tetric EvoCeram Bulk Fill) and TPFill (Tetric PowerFill), and two flowable (n=6): TBFlow (Tetric EvoFlow Bulk Fill) and TPFlow (Tetric PowerFlow) resin composites. Class I cavities (4 mm depth × 4 mm length × 4 mm width) were 3D-printed and filled in a single increment: TBFill and TBFlow were light-activated using a Bluephase Style 20i (10 seconds in high-mode); TPFill and TPFlow were light-activated using a Bluephase PowerCure (three seconds). The same adhesive system (Adhese Universal) was used for all groups. Microcomputed tomography scans were obtained before and after light-activation. Filler particle movement was identified by polymerization shrinkage vectors at five depths (from 0-4 mm): top, top-middle, middle, middle-bottom and bottom.

RESULTS

TPFlow showed the lowest total vector displacement, followed by TBFlow, TBFill and TPFill, significantly different among each other (p<0.05). Generally, BFRCs showed decreased vector displacement with increased depth, and higher displacement at the top-surface (p<0.05). Qualitative analysis showed a similar pattern of vector magnitude and displacement for groups TBFill and TPFill, with displacement vectors on occlusal (top) surfaces toward the center of the restoration from the top to middle areas, and relatively limited displacement at the bottom. TBFlow and TPFlow showed more displacement on the occlusal (top).

CONCLUSIONS

Short curing time with high-radiant emittance on fast-curing BFRCs was shown to be a feasible option in terms of vector displacement. Flowable BFRCs presented lower vector displacement than their regular-viscosity versions.

Technical skills simulation in transplant surgery: a systematic review

Purpose

 Transplant surgery is a demanding field in which the technical skills of the surgeon correlates with patient outcomes. As such, there is potential for simulation-based training to play an important role in technical skill acquisition. This study provides a systematic assessment of the current literature regarding the use of simulation to improve surgeon technical skills in transplantation.

Methods

 Data were collected by performing an electronic search of the PubMed and Scopus database for articles describing simulation in transplant surgery. The abstracts were screened using the preferred reporting items for systematic reviews and meta-analysis (PRISMA) guidelines. Three reviewers analyzed 172 abstracts and agreed upon articles that met the inclusion criteria for the systematic review.

Results

 Simulators can be categorized into virtual reality simulators, cadaveric models, animal models (animate or inanimate) and synthetic physical models. No virtual reality simulators in transplant surgery are described in the literature. Three cadaveric models, seven animal models and eight synthetic physical models specific to transplant surgery are described. A total of 18 publications focusing on technical skills simulation in kidney, liver, lung, pancreas, and cardiac transplantation were found with the majority focusing on kidney transplantation.

Conclusions

 This systematic review identifies currently reported simulation models in transplant surgery. This will serve as a reference for general surgery and transplant surgery professionals interested in using simulation to enhance their technical skills.

OP0008 A NOVEL SITE-SPECIFIC PEGYLATED IL-2 WITH POTENT AND TREG-SELECTIVE ACTIVITY IN VIVO

Background

Decreased regulatory T cells (Tregs) and Treg dysfunction are hallmarks of a various autoimmune and inflammatory diseases. While low-dose IL-2 therapy induces Treg expansion in vivo and has clinical benefits in some diseases (e.g., SLE and chronic graft-versus-host disease [GvHD]), there are many concerns about adverse events due to low Treg-selectivity. Furthermore, frequent dosing is needed due to the short half-life.

Objectives

We discovered a novel site-specific PEGylated IL-2 variant, KKC80, with high Treg selectivity and a long half-life in vivo, which overcomes the issues of low-dose IL-2 therapy.

Methods

Based on the co-crystal structure of wild-type IL-2 and its heterotrimeric receptor (PBD ID: 2ERJ), amino acid residues that were to be PEGylation sites were substituted with oAzZLys, an azide-containing lysine derivative. The PEG molecule was site-specifically attached to oAzZLys-incorporated IL-2 by copper-free click chemistry. The binding property to the IL-2 receptors were measured by surface plasmon resonance (SPR). In vitro, Treg selectivity was evaluated by the IL-2-dependent proliferation activity of Tregs and NK cells from human peripheral blood mononuclear cells (PBMCs). In vivo pharmacological activity after the single subcutaneous administration in cynomolgus monkeys was measured by changes in Treg count and Treg activation status in peripheral blood by flow cytometry. Pharmacokinetic parameters were calculated according to serum PEGylated IL-2 concentration. Efficacy in mouse xenogeneic GvHD model using human PBMC-transplanted NOG mice and in monkey DTH model were evaluated.

Results

A novel PEGylated IL-2, KKC80 (human IL-2 desA1/C125S /I129oAzZLys_W-shaped 80 kDa PEG) was discovered by optimizing the PEGylation site and PEG structure based on Treg selectivity and PK. SPR analysis showed that the binding affinity of KKC80 to CD25 was moderately decreased from wild-type IL-2, while binding affinity of KKC80 to IL-2Rβγ was remarkably decreased due to a significant change of the association rate constant. In vitro, wild-type IL-2 activated both Tregs and NK cells in the same concentration range, whereas KKC80 selectively activated Tregs. The Treg selectivity of KKC80 was comparable to another IL-2 mutein, Fc.IL-2 V91K. KKC80, but not Fc.IL-2 V91K, retained its biological activity, even in the presence of a large amount of recombinant soluble CD25, which mimicked the endogenous decoy receptor for IL-2. In monkeys, KKC80 selectively increased peripheral blood Tregs in a dose-dependent manner; the average maximum rate of increase of Treg count in animals treated with 0.01, 0.03, 0.1, 0.3 and 1 mg/kg was 1.5, 3.5, 28, 50 and 154-fold, respectively. In contrast to Tregs, the rates of increase of conventional CD4+ T, CD8+ T and NK cells were low. The Treg increase peaked on day 8 or 11 and lasted for over day 29. KKC80 showed a more sustained upregulation of functional Treg markers (e.g., Foxp3 and CD25) in comparison to Fc.IL-2 V91K. The half-life of KKC80 was calculated as 83.5 to 150 h. At high doses, inflammation-related adverse effects, including increased CRP (≥0.3 mg/kg) and deterioration of general conditions (1 mg/kg) were observed. In the mouse xenogenic GvHD model, KKC80 ameliorated GvHD symptoms and suppressed multiple tissue inflammation markers. Decreased soluble CD25 and IFN-γ were also confirmed, suggesting Treg-mediated anti-inflammatory effect by KKC80 administration were exerted in vivo. In the monkey DTH model, KKC80 suppressed skin inflammation and antibody production.

Conclusion

Among next-generation IL-2 variants, KKC80 showed a best-in-class biological profile for Treg activation. A drastic and sustained increase of Tregs with high Treg-selectivity and anti-inflammatory effects were observed in vivo. These data suggest that in comparison to current IL-2 therapy, KKC80 provides superior therapeutic index and efficacy in patients with autoimmune and inflammatory diseases.

Figure 1.

Disclosure of Interests

Masahiro Ikeda Employee of: Kyowa Kirin Co., Ltd., Shinpei Yamaguchi Employee of: Kyowa Kirin Co., Ltd., Masumi Murakami Employee of: Kyowa Kirin Co., Ltd., Shigeki Takaoka Employee of: Kyowa Kirin Co., Ltd., Yasuko Sakaguchi Employee of: Kyowa Kirin Co., Ltd., Shunki Yasui Employee of: Kyowa Kirin Co., Ltd., Kousuke Iijima Employee of: Kyowa Kirin Co., Ltd., Kenichiro Nanya Employee of: Kyowa Kirin Co., Ltd., Hideyuki Onodera Employee of: Kyowa Kirin Co., Ltd., Toru Amano Employee of: Kyowa Kirin Co., Ltd.

Interpretable AI Explores Effective Components of CAD/CAM Resin Composites

High flexural strength of computer-aided manufacturing resin composite blocks (CAD/CAM RCBs) are required in clinical scenarios. However, the conventional in vitro approach of modifying materials’ composition by trial and error was not efficient to explore the effective components that contribute to the flexural strength. Machine learning (ML) is a powerful tool to achieve the above goals. Therefore, the aim of this study was to develop ML models to predict the flexural strength of CAD/CAM RCBs and explore the components that affect flexural strength as the first step. The composition of 12 commercially available products and flexural strength were collected from the manufacturers and literature. The initial data consisted of 16 attributes and 12 samples. Considering that the input data for each sample were recognized as a multidimensional vector, a fluctuation range of 0.1 was proposed for each vector and the number of samples was augmented to 120. Regression algorithms—that is, random forest (RF), extra trees, gradient boosting decision tree, light gradient boosting machine, and extreme gradient boosting—were used to develop 5 ML models to predict flexural strength. An exhaustive search and feature importance analysis were conducted to analyze the effective components that affected flexural strength. The R2 values for each model were 0.947, 0.997, 0.998, 0.983, and 0.927, respectively. The relative errors of all the algorithms were within 15%. Among the high predicted flexural strength group in the exhaustive search, urethane dimethacrylate was contained in all compositions. Filler content and triethylene glycol dimethacrylate were the top 2 features predicted by all models in the feature importance analysis. ZrSiO4 was the third important feature for all models, except the RF model. The ML models established in this study successfully predicted the flexural strength of CAD/CAM RCBs and identified the effective components that affected flexural strength based on the available data set.

Using recombinase-mediated cassette exchange to engineer MIN6 insulin-secreting cells based on a newly identified safe harbor locus

AIMS/INTRODUCTION

Recent studies have identified genomic and transcript level changes along with alterations in insulin secretion in patients with diabetes and in rodent models of diabetes. It is important to establish an efficient system for testing functional consequences of these changes. We aimed to generate such a system using insulin-secreting MIN6 cells.

MATERIALS AND METHODS

MIN6 cells were first engineered to have a tetracycline-regulated expression system. Then, we used the recombination-mediated cassette exchange strategy to explore the silencing-resistant site in the genome and generated a master cell line based on this site.

RESULTS

We identified a site 10.5 kbps upstream from the Zxdb gene as a locus that allows homogenous transgene expression from a tetracycline responsible promoter. Placing the Flip/Frt-based platform on this locus using CRISPR/Cas9 technology generated modified MIN6 cells applicable to achieving cassette exchange on the genome. Using this cell line, we generated MIN6 subclones with over- or underexpression of glucokinase. By analyzing a mixed population of these cells, we obtained an initial estimate of effects on insulin secretion within 6 weeks. Furthermore, we generated six MIN6 cell sublines simultaneously harboring genes of inducible overexpression with unknown functions in insulin secretion, and found that Cited4 and Arhgef3 overexpressions increased and decreased insulin secretion, respectively.

CONCLUSIONS

We engineered MIN6 cells, which can serve as a powerful tool for testing genetic alterations associated with diabetes, and studied the molecular mechanisms of insulin secretion.

The prognostic impact of right ventricular dysfunction in patients with septic cardiomyopathy

Background

Sepsis is a systemic condition of profoundly impaired health in which an infection leads to a dysregulated host response, and consecutively causes organ dysfunction, shock, and even death. Septic cardiomyopathy (SCM) is one of the multiple organ dysfunctions. SCM is typically defined as left ventricular (LV) dysfunction, presented by decreased LV ejection fraction (LVEF). However, it remains unclear about the detailed mechanism of cardiac dysfunction. In addition, the prognostic impact of right heart dysfunction in SCM patients has not been fully investigated.

Purpose

The purpose of this study was to investigate the prognostic impact of right heart dysfunction in patients with SCM.

Methods

We used the MIMIC-III (Medical Information Mart for Intensive Care III) critical care database, which is a large, freely-available database comprising deidentified health-related data associated with over forty thousand patients who stayed in critical care units of the Beth Israel Deaconess Medical Center between 2001 and 2012. We retrospectively analyzed data of patients with septic shock on admission to intensive care unit (ICU). Septic shock was defined as the presence of any suspected infections, the need for vasopressors, and the lactate level exceeding 2 mmol/L, based on the Sepsis-3 criteria. Patients were performed portable transthoracic echocardiography (TTE) during hospitalization. LVEF and right ventricular (RV) function were determined predominately by visual estimation in the parasternal long-axis view. SCM was defined as having a minimum LVEF of 50% or less during hospitalization. Patients with hyperdynamic motion of LVEF &gt;70% were excluded.

Results

In total, there were 2254 patients with septic shock. Of these, 604 patients who underwent TTE were enrolled, and 314 patients were diagnosed with SCM. At baseline, age, gender, Sequential Organ Failure Assessment (SOFA) score, maximum lactate levels, and maximum norepinephrine dosage were 70 [59–79] years, 194 males, 13 [11–15], 4.0 [2.7–6.2] mmol/L, and 0.20 [0.10–0.31] mcg/kg/min, respectively. All patients were treated with vasopressors. In Kaplan-Meier survival analysis, patients with SCM had increased 28-day mortality compared with those without SCM (log-rank, p=0.09). In addition, we divided SCM patients into two groups; SCM with and without RV dysfunction. SCM patients with RV dysfunction had significant increased 28-day mortality compared with those without RV dysfunction (log-rank, p=0.01) (Figure). In Cox proportional hazard regression analysis adjusted for age, male sex, SOFA score, and maximum lactate levels, RV dysfunction was an independent determinant of 28-day mortality (hazard ratio, 1.59; 95% confidence interval, 1.03–2.46; p=0.03).

Conclusions

The presence of RV dysfunction increased 28-day mortality in patients with SCM. It might be useful for predicting the prognosis of SCM to evaluate not only left heart function but also right heart function.

Kaplan-Meier survival curves

Funding Acknowledgement

Type of funding source: None

Associations between spleen volume and exercise capacity in advanced heart failure patients with left ventricular assist device

Background

The spleen has been recognized as an important organ with several functions such as a reservoir of blood volume, and an involvement in iron metabolism by processing of aged red blood cells and recycling iron. During exercise, spleen contracts, and red blood cells pooled in the spleen are recruited into the systemic circulation. So far, we reported that spleen size changed in advanced heart failure (HF) with left ventricular assist device (LVAD). In addition, spleen volume was related to pulmonary capillary wedge pressure (PCWP) or right atrial pressure (RAP) as parameters of cardiac preload. However, it remains unclear about the relationship between spleen volume and exercise capacity in advanced HF with LVAD.

Purpose

The purpose of this study was to investigate the associations between spleen volume and exercise capacity in advanced HF patients with LVAD.

Methods

We enrolled 27 HF patients (21 males, 45±12 years) with LVAD (HeartMate II™; Abbott, Chicago, IL, USA) for use as a bridge to heart transplantation. All patients underwent blood test, echocardiography, right heart catheterization, computed tomography (CT) and cardiopulmonary exercise testing (CPET). Spleen size was measured by CT volumetry. We excluded patients with splenic infarction or aortic valve closure surgery.

Results

At baseline, body mass index, blood brain natriuretic peptide levels, hemoglobin levels, left ventricular ejection fraction were 21.4±3.1 kg/m2, 73.8 (51.9–165.8) pg/mL, 12.1 (10.6–13.4) g/dL, 24.8±14.7%, respectively. Total cardiac output (CO), the sum of pump flow and CO of native heart was 4.6±0.9 L/min, and spleen volume was 184.9±48.8 mL. As for parameters of CPET, peak heart rate (HR), peak VO2, and peak O2 pulse were 128±25 beats/min, 14.2±3.3 mL/kg/min, and 6.6±1.9 mL/beat. At rest, there were significant correlations between spleen volume and PCWP (r=0.382, p=0.049), RAP (r=0.406, p=0.035) or pulsatility index (r=0.384, p=0.047), despite no correlations with total CO or pump flow. During exercise, there were significant interrelations of spleen volume with peak VO2 (r=0.451, p=0.018) and peak O2 pulse (r=0.427, p=0.026). Furthermore, peak VO2 was interrelated with peak HR (r=0.481, p=0.011) or hemoglobin levels (r=0.649, p&lt;0.001). Remarkably, spleen volume was significantly correlated with hemoglobin levels (r=0.391, p=0.043) (Figure). Interpreting these results based on Fick's formula, the proportion of native CO to total CO is very small at rest, but increases during exercise. The spleen during exercise may contribute to increased native CO, especially stroke volume. Moreover, the spleen may be related to both cardiac preload and oxygen carrying capacity, resulting in a significant association between spleen volume and peak VO2.

Conclusion

Spleen volume could be a useful predictor of exercise capacity in advanced HF patients with LVAD, reflecting splenic function to modulate cardiac preload and blood hemoglobin levels.

Spleen volume and exercise parameters

Funding Acknowledgement

Type of funding source: None

Efficacy of right ventricular dysfunction estimated by pulmonary artery pulsatility index in stable phased dilated cardiomyopathy

Background

Dilated cardiomyopathy (DCM) is characterized by a reduction in left and/or right ventricular myocardial contraction, dilatation of biventricular cavity and major cause of heart failure with high morbidity and mortality rates. Right ventricular dysfunction (RVD) recently have been received attention because of 34% of DCM had RVD and considered as a powerful predictor of impaired prognosis in DCM. Pulmonary Artery Pulsatility index (PAPi) is a novel hemodynamic index shown to predict RVD in advanced heart failure, however, it is unknown that even at early phase, PAPi can reflects latent right myocardial damage and predict long-term prognosis in stable DCM patients.

Methods

From April 2000 to March 2018, we enrolled 566 consecutive patients with cardiomyopathy. All patients underwent laboratory measurement, echocardiography, and cardiac catheterization to evaluate their general conditions. After excluded secondary cardiomyopathy, ischemic cardiomyopathy, and valvular heart disease, finally 162 DCM patients were enrolled. All enrolled patients had NYHA I/II/III and NYHA I/II were 150 patients (92.6%). PAPi was calculated as (systolic pulmonary artery pressure – diastolic pulmonary artery pressure (Pulmonary artery pulse pressure: PAPP)) / right atrial pressure. Median followed up for 4.85 years. In this study 149 patients were performed endomyocardial biopsy in order to exclude secondary cardiomyopathies and 95 patients were assessed using Sirius red staining. Myocardial fibrosis in biopsy specimen was assessed using Sirius red staining, and the positive region was quantified as the collagen volume fraction (CVF).

Results

The mean age and LV ejection fraction (EF) was 50.9±12.6 years and 30.5±8.3%, respectively. When divided into two groups by median PAPi value [PAPi &lt;3.06 (L-PAP) and PAPi ≥3.06 (H-PAP)], even though there were no significant difference in BNP, pulmonary vascular resistance and right ventricular stroke work index between two groups, the probability of cardiac event-survival was significantly higher in L-PAP than H-PAP by Kaplan-Meier analysis (P=0.012). Furthermore, cox proportional hazard regression analysis revealed that PAPi was independent predictor of cardiac events (hazard ratio: 0.624, P=0.025). In pathological analysis, there was no difference between H-PAPi and L-PAPi in CVF.

Conclusion

In the calculation of PAPi, PAPP reflects both RV contractility and left atrial filling pressure and this index considered as RV adaptive response to afterload. The denominator of the PAPP is defined by RA pressure, which serves as a marker of RV preload. Thus, PAPi reflect both preload and afterload of RV at the same time and even though estimated patients at early phase, RVD exists in DCM patients without severe myocardial fibrosis, and PAPi may help stratify DCM and predict cardiac events.

Kaplan-Meier analysis

Funding Acknowledgement

Type of funding source: None

Genetic parameters for conception rate and milk production traits within and across Holstein herds with different housing types and feeding systems during the first 3 lactations

The housing types (HST) in which dairy cows are kept and the feeding systems (FDS) used differ among farmers in Japan. Here, we investigated the genetic relationships among conception rate at first insemination (CR) and milk production traits (PROD) during the first 3 lactations of Holstein cows by using a multiple-trait model that considered the trait values of herds with different HST [tiestall (TSL) barn, freestall (FS) barn, or grazing (GZ)] and FDS as separate traits. Milk production and conception records of Holstein cows in the Hokkaido region of Japan (283,611 records for first lactation, 253,902 for second, and 181,197 for third) were analyzed. We categorized herds with TSL or FS into 2 types of FDS for cows: separate feeding (SF) of roughage plus concentrate or feeding of total mixed ration, in which roughage and concentrates were mixed before feeding. The PROD analyzed were cumulative milk, fat, and protein yields within 305 d and lactation persistency, which we defined as the difference between milk yields at 240 and 60 d in milk. We estimated the heritabilities for CR or PROD within each HST or HST × FDS group and the genetic correlations between these traits within each group or across different groups within each lactation by using a 3-HST (TSL, FS, and GZ) × 2-trait (CR and each PROD) or 2-HST (TSL and FS) × 2-FDS × 2-trait animal model. Heritability estimates for CR in GZ were higher than those in TSL or FS, and genetic correlations for CR between GZ and TSL or FS barns were weaker than those between TSL and FS barns. In addition, genetic correlations between CR and PROD in GZ were weaker than those in TSL and FS barns. In the comparison among the 4 HST × FDS except GZ, heritability estimates for CR in FS × SF were higher than those in the others, and genetic correlations for CR between FS × SF and the other systems were relatively weak. These results indicated that differences in the production system for Holstein cows influence genotypic effects in terms of the cows' ability to conceive and the genetic relationships between fertility traits and milk production traits.

Novel method for endovascular fenestration using radiofrequency transseptal needle for aortic dissection with malperfusion syndrome

Malperfusion syndrome is considered one of the most significant adverse events in aortic dissection disease and often requires invasive strategies to improve ischemia. We report the case of a patient who was presented with worsening claudication and leg rest pain due to malperfusion syndrome of type B aortic dissection. We successfully performed endovascular fenestration therapy to relieve the symptom by using a NRG radiofrequency transseptal needle (Baylis Medical, Montreal, Canada). We suggest that this novel method would be available for the patients with malperfusion syndrome of aortic dissection

The mechanical and chemical stability of the interfaces in bioactive materials: The substrate-bioactive surface layer and hydroxyapatite-bioactive surface layer interfaces

Bioactive materials should maintain their properties during implantation and for long time in contact with physiological fluids and tissues. In the present research, five different bioactive materials (a bioactive glass and four different chemically treated bioactive titanium surfaces) have been studied and compared in terms of mechanical stability of the surface bioactive layer-substrate interface, their long term bioactivity, the type of hydroxyapatite matured and the stability of the hydroxyapatite-surface bioactive layer interface. Numerous physical and chemical analyses (such as Raman spectroscopy, macro and micro scratch tests, soaking in SBF, Field Emission Scanning Electron Microscopy equipped with Energy Dispersive Spectroscopy (SEM-EDS), zeta potential measurements and Fourier Transformed Infra-Red spectroscopy (FTIR) with chemical imaging) were used. Scratch measurements evidenced differences among the metallic surfaces concerning the mechanical stability of the surface bioactive layer-substrate interface. All the surfaces, despite of different kinetics of bioactivity, are covered by a bone like carbonate-hydroxyapatite with B-type substitution after 28 days of soaking in SBF. However, the stability of the apatite layer is not the same for all the materials: dissolution occurs at pH around 4 (close to inflammation condition) in a more pronounced way for the surfaces with faster bioactivity together with detachment of the surface bioactive layer. A protocol of characterization is here suggested to predict the implant-bone interface stability.

Usefulness of Post-labeling Delay for the Assessment of Bright Vessel Appearance by Arterial Spin Labeling

Objective

This study was performed to clarify the differences in blood flow strength, blood vessel diameter, and post-labeling delay (PLD) by physical experiments, and to examine whether bright vessel appearance (BVA) can be observed by arterial spin labeling (ASL).

Methods

We introduced simulated blood flow (25 cm/sec, 12.5 cm/sec) using a specially made phantom of fixed tubes in a plastic container. At each speed, we scanned at several points of PLD using ASL imaging. We measured the signal in the tube to obtain a signal intensity (SI). We revised the T1 level from the SI and obtained SI_blood. We used SI_tissue with normal perfusion measured from obtained clinical images by ASL and compared it with SI_blood.

Results

In tubes with a narrow inner diameter, the signal slightly decreased. SI also decreased under slow flow compared with fast flow. At each flow rate, SI_blood significantly exceeded SI_tissue.

Conclusion

PLD distinguishes spin in brain tissue from 1525 msec to 2525 msec, and it can be observed. As spin signal decreases when the flow rate is slow, attention is necessary for observation. Assessment at PLD1525-2525 msec where normal perfusion was obtained suggested that BVA can be observed.

Bioactive materials: In vitro investigation of different mechanisms of hydroxyapatite precipitation

Bioactive materials, able to induce hydroxyapatite precipitation in contact with body fluids, are of great interest for their bone bonding capacity. . The aim of this paper is to compare bioactive materials with different surface features to verify the mechanisms of action and the relationship with kinetics and type of precipitated hydroxyapatite over time. Four different surface treatments for Ti/Ti6Al4V alloy and a bioactive glass were selected and a different mechanism of bioactivity is supposed for each of them. Apart from the conventional techniques (FESEM, XPS and EDX), less common characterizations (zeta potential measurements on solid surfaces and FTIR chemical imaging) were applied. The results suggest that the OH groups on the surface have several effects: the total number of the OH groups mainly affects hydrophilicity of surfaces, while the isoelectric points, surface charge and ions attraction mainly depend on OH acidic/basic strength. Kinetics of hydroxyapatite precipitation is faster when it involves a mechanism of ion exchange while it is slower when it is due to electrostatic effects . The electrostatic effect cooperates with ion exchange and it speeds up kinetics of hydroxyapatite precipitation. Different bioactive surfaces are able to differently induce precipitation of type A and B of hydroxyapatite, as well as different degrees of crystallinity and carbonation. STATEMENT OF SIGNIFICANCE: The bone is made of a ceramic phase (a specific type of hydroxyapatite), a network of collagen fibers and the biological tissue. A strong bond of an orthopedic or dental implant with the bone is achieved by bioactive materials where precipitation and growth of hydroxyapatite occurs on the implant surface starting from the ions in the physiological fluids. Several bioactive materials are already known and used, but their mechanism of action is not completely known and the type of precipitated hydroxyapatite not fully investigated. In this work, bioactive titanium and bioglass surfaces are compared through conventional and innovative methodologies. Different mechanisms of bioactivity are identified, with different kinetics and the materials are able to induce precipitation of different types of hydroxyapatite, with different degree of crystallinity and carbonation.

Hemichorea after hypoglycemic episodes with negative MRI findings in an elderly woman with poorly controlled type 2 diabetes mellitus: a case report

Background

Case presentation

Conclusions

Electronic supplementary material

P6452Circulating human epididymis protein 4 is a novel prognostic predictor in ambulatory patients with non-ischemic dilated cardiomyopathy

Background

Myofibroblasts, which are activated fibroblasts, play an important role in interstitial fibrosis in non-ischemic dilated cardiomyopathy (NIDCM). Recently, human epididymal body protein 4 (HE4) has attracted attention as a marker specific to myofibroblasts. However, the prognostic impact of HE-4 on cardiovascular events in NIDCM patients has not been reported.

Purposes

The purpose of this study was to investigate the impact of circulating serum HE4 on the prognosis in patients with NIDCM.

Methods

Forty-four NIDCM patients underwent echocardiography, laboratory measurements, cardiac catheterization, and endomyocardial biopsy within one week under stable heart failure condition. Patients with cancer were excluded from this study. We collected blood samples from peripheral vain, ascending aorta, and coronary sinus during cardiac catheterization and measured serum HE4 level. They were divided into two groups at the median of HE4 level: High-HE4 group (HE4 >69 pmol/L); n=22, Low-HE4 group (HE4 <69 pmol/L); n=22. Cardiac composite event was defined as cardiac related deaths and hospitalization due to worsening heart failure.

Results

The mean age, left ventricular ejection fraction (LVEF), and plasma brain natriuretic peptide level were 56 years, 32%, and 205 pg/mL. Between two groups, there were no significant differences in age, gender, LVEF, left ventricular end-diastolic diameter, cardiac index, and pulmonary capillary wedge pressure. However, estimated glomerular filtration rate was significantly lower in the High-HE4 group (p=0.025). Kaplan-Meier survival analysis revealed that the High-HE group had a higher rate of cardiac composite event (p=0.011, see Figure). However, as for the pathological analysis, not only the peripheral HE4 level but also HE4 value subtracting coronary sinus from ascending aorta did not significantly correlate with collagen volume fraction in biopsy samples.

Circulating HE4 level and prognosis

Conclusion

Elevated circulating HE4 is associcated with poor prognosis in ambulatory patients with NIDCM.