Dynamical Transition in Dehydrated Proteins

Terahertz time-domain spectroscopy and differential scanning calorimetry were used to study the role of the dynamics of biomolecules decoupled from solvent effects. Lyophilized sucrose exhibited steadily increasing absorption with temperature as anharmonic excitations commenced as the system emerged from a deep minimum of the potential energy landscape where harmonic vibrations dominate. The polypeptide bacitracin and two globular proteins, lysozyme and human serum albumin, showed a more complex temperature dependence. Further analysis focused on the spectral signature below and above the boson peak. We found evidence of the onset of anharmonic motions that are characteristic for partial unfolding and molecular jamming in the dry biomolecules. The activation of modes of the protein molecules at temperatures comparable to the protein dynamical transition temperature was observed in the absence of hydration. No evidence of Fröhlich coherence, postulated to facilitate biological function, was found in our experiments.

Three-Dimensional Homodyne Light Detection (3D-HLD) for High-Throughput Submicron Particle Analysis in (Highly Concentrated) Protein Biopharmaceuticals, Viral Vectors, and LNPs

During biopharmaceutical development, particle monitoring and characterization are crucial. Notably, particles can be impurities considered as critical quality attribute, or active pharmaceutical ingredient (e.g., viral vectors) or drug delivery system (e.g., lipid nanoparticles) itself. Three-dimensional homodyne light detection (3D-HLD) is a novel technique that can characterize particles in the ∼0.2 µm to 2.0 µm size range. We evaluated 3D-HLD for the analysis of high concentration protein formulations (up to 200 mg/mL), where formulation refractive index and background noise became limiting factors with increasing protein concentration. Sample viscosity however did not impact 3D-HLD results, in contrast to comparative analyses with NTA and MRPS. We also applied 3D-HLD in high-throughput screenings at high protein concentration or of lipid nanoparticle and viral vector formulations, where impurities were analyzed in the presence of a small (<0.2 µm) particulate active pharmaceutical ingredient. 3D-HLD turned out to be in good agreement with or a good complement to other state-of-the-art particle characterization techniques, including BMI, MRPS, and DLS. The main application of 3D-HLD is high-throughput particle analysis at low sample volume. Follow-up investigation of the optimized particle sizing approach and of detection settings could further improve the understanding of the method and potentially increase ease of operation.

Molecular Dynamics Study of Protein Aggregation at Moving Interfaces

Repeated compression and dilation of a protein film adsorbed to an interface lead to aggregation and entry of film fragments into the bulk. This is a major mechanism for protein aggregate formation in drug products upon mechanical stress, such as shaking or pumping. To gain a better understanding of these events, we developed a molecular dynamics (MD) setup, which would, in a later stage, allow for in silico formulation optimization. In contrast to previous approaches, the molecules of our model protein human growth hormone displayed realistic shapes, surfaces, and interactions with each other and the interface. This enabled quantitative assessment of protein cluster formation. Simulation outcomes aligned with experimental data on subvisible particles and turbidity, thereby validating the model. Computational and experimental results indicated that compression speed does not affect the aggregation behavior of preformed protein films but rather their regeneration. Protein clusters that formed during compression disassembled upon relaxation, suggesting that the particles originate from a partly compressed state. Desorption studies via steered MD revealed that proteins from compressed systems are more likely to detach as clusters, implying that compression effects at the interface translate into aggregates present in the bulk solution. With the possibility of studying the impact of different variables upon compression and dilation at the interface on a molecular level, our model contributes to the understanding of the mechanisms of protein aggregation at moving interfaces. It also enables further studies to change formulation parameters, interfaces, or proteins.

A model-based optimization strategy to achieve fast and robust freeze-drying cycles

Freeze-drying is a time and cost-intensive process. The primary drying phase is the main target in a process optimization exercise. Biopharmaceuticals require an amorphous matrix for stabilization, which may collapse during primary drying if the critical temperature of the formulation is exceeded. The risk of product collapse should be minimized during a process optimization to accomplish a robust process, while achieving an economical process time. Mechanistic models facilitate the search for an optimal primary drying protocol. We propose a novel two-stage shelf temperature optimization approach to maximize sublimation during the primary drying phase, without risking product collapse. The approach includes experiments to obtain high-resolution variability data of process parameters such as the heat transfer coefficient, vial dimensions and dried layer resistance. These process parameters variability data are incorporated into an uncertainty analysis to estimate the risk of failure of the protocol. This optimization approach enables to identify primary drying protocols that are faster and more robust than a classical approach. The methodology was experimentally verified using two formulations which allow for either aggressive or conservative freeze-drying of biopharmaceuticals.

Evaluation of a novel silicone oil free primary packaging system with PTFE-based barrier stopper for biologics

In order to overcome silicone oil related problems for biopharmaceuticals, novel container systems are of interest with a focus on the reduction, fixation or complete avoidance of silicone oil in the primary container. Ultimately, silicone oil free (SOF) container systems made from cyclic olefin (co-)polymer or glass combined with the respective silicone-oil free plungers were developed. In the following study we evaluated the potential of a SOF container system based on a glass barrel in combination with a fluoropolymer coated syringe plunger. In a long-term stability study, the system was compared to other alternative container systems in terms of functionality and particle formation when filled with placebo buffers. The system proved to be a valuable alternative to marketed siliconized container systems with acceptable and consistent break-loose gliding forces and it was clearly superior in terms of particle formation over storage time. Additionally, we evaluated the importance of the glass barrel surface for functionality. The interaction of the fill medium with the glass surface significantly impacted friction forces. Consequently, storage conditions and production processes like washing and sterilization, which can easily alter the surface properties, should be carefully evaluated, and controlled. The novel combination of non-lubricated glass barrel and fluoropolymer coated plunger provides a highly valuable SOF packaging alternative for biopharmaceuticals.

Impact of Autoclavation on Baked-on Siliconized Containers for Biologics

Many pharmaceutical manufacturing units utilize pre-sterilized ready-to fill primary containers for parenterals. The containers may have been sterilized by the supplier via autoclavation. This process can change the physicochemical properties of the material and the subsequent product stability. We studied the impact of autoclavation on baked on siliconized glass containers for biopharmaceuticals. We characterized the container layers of different thickness before and after autoclavation for 15 min at 121 °C and 130 °C. Furthermore, we analyzed the adsorption of a mAb to the silicone layer and subjected filled containers to 12 weeks storage at 40 °C monitoring functionality and subvisible particle formation of the product. Autoclavation turned the initially homogenous silicone coating into an incoherent surface with uneven microstructure, changed surface roughness and energy, and increased protein adsorption. The effect was more pronounced at higher sterilization temperatures. We did not observe an effect of autoclavation on stability. Our results did not indicate any concerns for autoclavation at 121 °C for safety and stability of drug/device combination products using baked-on siliconized glass containers.

Effect of the Tubing Material Used in Peristaltic Pumping in Tangential Flow Filtration Processes of Biopharmaceutics on Particle Formation and Flux

Tangential flow filtration (TFF) is a central step in manufacturing of biopharmaceutics. Membrane clogging leads to decreased permeate flux, longer process time and potentially complete failure of the process. The effect of peristaltic pumping with tubings made of three different materials on protein particle formation during TFF was monitored via micro flow imaging, turbidity and photo documentation. At low protein concentrations, pumping with a membrane pump resulted in a stable flux with low protein particle concentration. Using a peristaltic pump led to markedly higher protein particle formation dependent on tubing type. With increasing protein particle formation propensity of the tubing, the permeate flux rate became lower and the process took longer. The protein particles formed in the pump were captured in the cassette and accumulated on the membrane leading to blocking. Using tubing with a hydrophilic copolymer modification counteracted membrane clogging and flux decrease by reducing protein particle formation. In ultrafiltration mode the permeate flux decrease was governed by the viscosity increase rather than by the protein aggregation; but using modified tubing is still beneficial due to a lower particle burden of the product. In summary, using tubing material for peristaltic pumping in TFF processes which leads a less protein particle formation, especially tubing material with hydrophilic modification, is highly beneficial for membrane flux and particle burden of the product.

Afraid of the wall of death? Considerations on monoclonal antibody characteristics that trigger aggregation during peristaltic pumping

Protein aggregation is of major concern in manufacturing of biopharmaceutics. Protein aggregation upon peristaltic pumping for filtration, transfer or filling is triggered by protein adsorption to the tubing surface and subsequent film rupture during roller movement. While the impact of tubing type and formulation has been studied in more detail, the contribution of the protein characteristics is not fully resolved. We studied the aggregation propensity of six monoclonal antibodies during peristaltic pumping and characterized their colloidal and conformational stability, hydrophobicity, and surface activity. A high affinity to the surface resulting in faster adsorption and film renewal was key for the formation of protein particles ≥ 1 µm. Film formation and renewal were influenced by the antibody hydrophobicity, potential for electrostatic self-interaction and conformational stability. The initial interfacial pressure increase within the first minute can serve as a good predictor for antibody adsorption and particle formation propensity. Our results highlight the complexity of protein adsorption and emphasize the importance of formulation development to reduce protein particle formation by avoidance of adsorption to interfaces.

The effect of mAb and excipient cryoconcentration on long-term frozen storage stability – Part 1: Higher molecular weight species and subvisible particle formation

Cryoconcentration upon large-scale freezing of monoclonal antibody (mAb) solutions leads to regions of different ratios of low molecular weight excipients, like buffer species or sugars, to protein. This study focused on the impact of the buffer species to mAb ratio on aggregate formation after frozen storage at −80 °C, −20 °C, and − 10 °C after 6 weeks, 6 months, and 12 months. An optimised sample preparation was established to measure T_g′ of samples with different mAb to histidine ratios via differential scanning calorimetry (DSC). After storage higher molecular weight species (HMWS) and subvisible particles (SVPs) were detected using size-exclusion chromatography (SEC) and FlowCam, respectively. For all samples, sigmoidal curves in DSC thermograms allowed to precisely determine T_g′ in formulations without glass forming sugars. Storage below T_g′ did not lead to mAb aggregation. Above T_g′, at −20 °C and − 10 °C, small changes in mAb and buffer concentration markedly impacted stability. Samples with lower mAb concentration showed increased formation of HMWS. In contrast, higher concentrated samples led to more SVPs. A shift in the mAb to histidine ratio towards mAb significantly increased overall stability. Cryoconcentration upon large-scale freezing affects mAb stability, although relative changes compared to the initial concentration are small. Storage below T_g′ completely prevents mAb aggregation and particle formation.

The effect of mAb and excipient cryoconcentration on long-term frozen storage stability – part 2: Aggregate formation and oxidation

We examined the impact of monoclonal antibody (mAb) and buffer concentration, mimicking the cryoconcentration found upon freezing in a 2 L bottle, on mAb stability during frozen storage. Upon cryoconcentration, larger protein molecules and small excipient molecules freeze-concentrate differently, resulting in different protein to stabiliser ratios within a container. Understanding the impact of these shifted ratios on protein stability is essential. For two mAbs a set of samples with constant mAb (5 mg/mL) or buffer concentration (medium histidine/adipic acid) was prepared and stored for 6 months at −10 °C. Stability was evaluated via size-exclusion chromatography, flow imaging microscopy, UV/Vis spectroscopy at 350 nm, and protein A chromatography. Dynamic light scattering was used to determine k_D values. Soluble aggregate levels were unaffected by mAb concentration, but increased with histidine concentration. No trend in optical density could be identified. In contrast, increasing mAb or buffer concentration facilitated the formation of subvisible particles. A trend towards attractive protein-protein interactions was seen with higher ionic strength. MAb oxidation levels were negatively affected by increasing histidine concentration, but became less with higher mAb concentration. Small changes in mAb and buffer composition had a significant impact on stability during six-month frozen storage. Thus, preventing cryoconcentration effects in larger freezing containers may improve long-term stability.

Modification of Tubings for Peristaltic Pumping of Biopharmaceutics

Protein particle formation during peristaltic pumping of biopharmaceuticals is due to protein film formation on the inner tubing surface followed by rupture of the film by the roller movement. Protein adsorption can be prevented by addition of surfactants as well as by increasing the hydrophilicity of the inner surface. Attempts based on covalent surface coating were mechanically not stable against the stress of roller movement. We successfully incorporated surface segregating smart polymers based on a polydimethylsiloxane (PDMS) backbone and polyethylene glycol (PEG) side blocks in the tubing wall matrix. For this we applied an easy, reproducible and cost-effective process based on soaking of tubing in toluene containing the PDMS-PEG copolymer. With this tubing modification we could drastically reduce protein particle formation during peristaltic pumping of a monoclonal antibody and human growth hormone (HGH) formulation in silicone and thermoplastic elastomer-based tubing. The modification did not impact the tubing integrity during pumping while hydrophilicity was increased and protein adsorption was prevented. Free PDMS-PEG copolymer might have an additional stabilizing effect, but less than 50 ppm of the PDMS-PEG copolymer leached from the modified tubing during 1 h of pumping in the experimental setup. In summary, we present a new method for the modification of tubings which reduces protein adsorption and particle formation during any operation involving peristaltic pumping, e.g. transfer, filling, or tangential flow filtration.

Utility of Three Flow Imaging Microscopy Instruments for Image Analysis in Evaluating four Types of Subvisible Particle in Biopharmaceuticals

Subvisible particles (SVPs) are a critical quality attribute of parenteral and ophthalmic products. United States Pharmacopeia recommends the characterizations of SVPs which are classified into intrinsic, extrinsic, and inherent particles. Flow imaging microscopy (FIM) is useful as an orthogonal method in both the quantification and classification of SVPs because FIM instruments provide particle images. In addition to the conventionally used FlowCam (Yokogawa Fluid Imaging Technologies) and Micro-Flow Imaging (Bio-Techne) instruments, the iSpect DIA-10 (Shimadzu) instrument has recently been released. The three instruments have similar detection principles but different optical settings and image processing, which may lead to different results of the quantification and classification of SVPs based on the information from particle images. The present study compares four types of SVP (protein aggregates, silicone oil droplets, and surrogates for solid free-fatty-acid particles, milled-lipid particles, and sprayed-lipid particles) to compare the results of size distributions and classification abilities obtained using morphological features and a deep-learning approach. Although the three FIM instruments were effective in classifying the four types of SVP through convolutional neural network analysis, there was no agreement on the size distribution for the same protein aggregate solution, suggesting that using the classifiers of the FIM instruments could result in different evaluations of SVPs in the field of biopharmaceuticals.

Evaluation of adsorption of DNA/PEI polyplexes to tubing materials

Nucleic acid drugs hold great promise for potential treatment of a variety of diseases. But efficient delivery is still the major challenge impeding translation. Nanoformulations based on polymers and lipids require preparation processes such as microfluidic mixing, spray drying or final filling, where pumping is a crucial step. Here, we studied the effect of pumping on the component and overall loss of a binary polyplex formulation made of DNA and polyethyleneimine (PEI). We varied tubing length and material with a focus on subsequent spray drying. Interestingly, product loss increased with the length of silicon tubing. Losses of DNA were prevented by using Pumpsil. The following spray drying process did not affect DNA content but caused PEI loss. Characterization of the different tubing materials revealed similar hydrophobicity of all tubing materials and showed neutral Pumpsil® surface charge, negative Santoprene™ surface charge, and a positive Silicon surface charge. Hence, adsorption of DNA onto tubing material was concluded to be the root cause for DNA loss after pumping and is based upon an interplay of ionic and hydrophobic interactions between polyplexes and tubing material. Overall, selecting the appropriate tubing material for processing nucleic acid nanoparticles is key to achieving satisfactory product quality.

Computational Fluid Dynamic Simulations of Temperature, Cryoconcentration, and Stress Time during Large-Scale Freezing and Thawing of Monoclonal Antibody Solutions

PURPOSE

Large-scale freezing and thawing experiments of monoclonal antibody (mAb) solutions are time and material consuming. Computational Fluid Dynamic (CFD) modeling of temperature, solute composition as well as the stress time, defined as the time between start of freezing and reaching T_g' at any point in the container, could be a promising approach to ease and speed up process development.

METHODS

Temperature profiles at six positions were recorded during freezing and thawing of a 2L rectangular bottle and compared to CFD simulations via OpenFOAM. Furthermore, cryoconcentration upon freezing and concentration gradients upon thawing of a mAb solution were predicted and the stress time calculated.

RESULTS

Temperature profiles during freezing were accurately matched by the CFD simulation. Thawing time was only 45min to 60 min longer in the model. The macroscopic cryoconcentration of the mAb was also matched by the simulation; only a highly concentrated region in the top and a diluted core in the geometrical centre of the 2 L bottle were not well reflected in the simulation. The concentration gradient after thawing obtained by simulation as well agreed with the experimental result. In addition, CFD simulations allowed to extract the global temperature distribution, the formation of ice, and thus the distribution of stress in the freezing liquid.

CONCLUSION

CFD simulations via OpenFOAM are a promising tool to describe large-scale freezing and thawing of mAb solutions and can help to generate a deeper understanding and to improve testing of the robustness of the processes.

Enhancing the Stabilization Potential of Lyophilization for Extracellular Vesicles

Extracellular vesicles (EV) are an emerging technology as immune therapeutics and drug delivery vehicles. However, EVs are usually stored at -80 °C which limits potential clinical applicability. Freeze-drying of EVs striving for long-term stable formulations is therefore studied. The most appropriate formulation parameters are identified in freeze-thawing studies with two different EV types. After a freeze-drying feasibility study, four lyophilized EV formulations are tested for storage stability for up to 6 months. Freeze-thawing studies revealed improved colloidal EV stability in presence of sucrose or potassium phosphate buffer instead of sodium phosphate buffer or phosphate-buffered saline. Less aggregation and/or vesicle fusion occurred at neutral pH compared to slightly acidic or alkaline pH. EVs colloidal stability can be most effectively preserved by addition of low amounts of poloxamer 188. Polyvinyl pyrrolidone failed to preserve EVs upon freeze-drying. Particle size and concentration of EVs are retained over 6 months at 40 °C in lyophilizates containing 10 mm K- or Na-phosphate buffer, 0.02% poloxamer 188, and 5% sucrose. The biological activity of associated beta-glucuronidase is maintained for 1 month, but decreased after 6 months. Here optimized parameters for lyophilization of EVs that contribute to generate long-term stable EV formulations are presented.

Replacing the Emulsion for Bake-on Siliconization of Containers-Comparison of Emulsion Stability and Container Performance in the Context of Protein Formulations

Pre-filled syringes have simplified parenteral administration of protein drugs. To ensure an easy and consistent movement of the plunger, the inner glass container surface is typically siliconized. For bake-on siliconization, emulsions are sprayed on and heat treated. Due to the European Union regulation REACh (Regulation concerning the R egistration, E valuation, A uthorisation and Restriction of Ch emicals) the use of certain emulsion components, partially constituting the gold standard Liveo^TM 365 35% Dimethicone NF Emulsion (Liveo^TM 365), becomes restricted and Liveo^TM 366 35% Dimethicone NF Emulsion (Liveo^TM 366) has been introduced as an alternative. This change may affect the handling properties as well as the silicone layer formed. The purpose of these studies was to identify any differences that may influence the stability and safety of the final drug/device combination product to enable the use of the new emulsion. We compared silicone emulsions Liveo^TM 365 and Liveo^TM 366 and dilutions focusing on 1) their general physical stability, 2) the thermal degradation process of the emulsions and their components, and 3) the resulting silicone layer concerning chemistry, morphology, and functionality. The results were linked to the assessment of the final product regarding particle formation and short-term stability. A comparison of the emulsions Liveo^TM 365 and Liveo^TM 366 for bake-on siliconization is presented to support the transition of the latter as it becomes mandatory with REACh. Our studies show that the two emulsions do not significantly differ with respect to handling and stability, the resultant silicone layer characteristics as well as its functionality. We conclude that the transition to the new emulsion will not significantly impact the final product or the layer performance upon storage and with respect to particle formation.

Proteins on the rack: Mechanistic studies on protein particle formation during peristaltic pumping

Peristaltic pumping can cause protein particle formation. The expected causes were unfolding by heat in the pump head, oxidative stress by cavitation generated during roller movement, interfacial adsorption to the tubing wall and mechanical stress by stretching of the tubing itself. The pump head reached 28°C during experiments stayed well below the onset of the melting point of the proteins. Thus, heat may only be a relevant root cause for proteins containing domains with very low unfolding temperature. Analysis by terephthalic acid dosimetry and protein oxidation via RP-HPLC ruled out major induction of reactive hydroxyl radicals by pumping, indicating that cavitation does not play a significant role in particle generation. Addition of surfactants suppresses protein adsorption to the tubing wall and drastically reduced protein particle formation. This indicates that interfacial protein adsorption is a key element. Repeated stretching of tubing filled with protein solution led to the formation of protein particles, demonstrating that expansion and compression of the protein film on the tubing surface is the second key component for particle formation. Thus, protein particle generation during peristaltic pumping originates from the formation of a protein film on the tubing surface which gets stretched and compressed, leading to film fragments entering the bulk solution. This interplay of protein film formation and its rupture has been also observed at liquid/liquid or liquid/air interfaces.

Evaluation of Two Novel Scale-Down Devices for Testing Monoclonal Antibody Aggregation During Large-Scale Freezing

There is a need for representative small volume devices that reflect monoclonal antibody (mAb) aggregation during freezing and thawing (FT) in large containers. We characterised two novel devices that aim to mimic the stress in rectangular 2 L bottles. The first scale-down device (SDD) consists of a 125 mL bottle surrounded by a 3D printed cover that manipulates heat exchange. The second device, a micro scale-down device (mSDD), adapts cooling and heating of 10 mL vials to extend stress time. MAb aggregation upon repeated FT was evaluated considering formation of higher molecular weight species, subvisible particles, and the increase in hydrodynamic radius, polydispersity index, and optical density at 350 nm. Three different mAb solutions were processed. Both an unshielded 125 mL bottle and the SDD can be used to predict aggregation during FT in 2 L bottles. In specific cases the unshielded 125 mL bottle underestimates whereas the SDD slightly overestimates soluble aggregate formation. The mSDD increases aggregation compared to 10 mL vials but is less representative than the SDD. Ultimately, both SDDs enable characterisation of protein sensitivity to large-scale FT with two orders of magnitude less volume and are superior to simply using smaller bottles.

Scaling Down Large-Scale Thawing of Monoclonal Antibody Solutions: 3D Temperature Profiles, Changes in Concentration, and Density Gradients

PURPOSE

Scale-down devices (SDD) are designed to simulate large-scale thawing of protein drug substance, but require only a fraction of the material. To evaluate the performance of a new SDD that aims to predict thawing in large-scale 2 L bottles, we characterised 3D temperature profiles and changes in concentration and density in comparison to 125 mL and 2 L bottles. Differences in diffusion between a monoclonal antibody (mAb) and histidine buffer after thawing were examined.

METHODS

Temperature profiles at six distinct positions were recorded with type T thermocouples. Size-exclusion chromatography allowed quantification of mAb and histidine. Polysorbate 80 was quantified using a fluorescent dye assay. In addition, the solution's density at different locations in bottles and the SDD was identified.

RESULTS

The temperature profiles in the SDD and the large-scale 2 L bottle during thawing were similar. Significant concentration gradients were detected in the 2 L bottle leading to marked density gradients. The SDD slightly overestimated the dilution in the top region and the maximum concentrations at the bottom. Fast diffusion resulted in rapid equilibration of histidine.

CONCLUSION

The innovative SDD allows a realistic characterisation and helps to understand thawing processes of mAb solutions in large-scale 2 L bottles. Only a fraction of material is needed to gain insights into the thawing behaviour that is associated with several possible detrimental limitations.

Towards an improved prediction of concentrated antibody solution viscosity using the Huggins coefficient

The viscosity of a monoclonal antibody solution must be monitored and controlled as it can adversely affect product processing, packaging and administration. Engineering low viscosity mAb formulations is challenging as prohibitive amounts of material are required for concentrated solution analysis, and it is difficult to predict viscosity from parameters obtained through low-volume, high-throughput measurements such as the interaction parameter, k_D, and the second osmotic virial coefficient, B₂₂. As a measure encompassing the effect of intermolecular interactions on dilute solution viscosity, the Huggins coefficient, k_h, is a promising candidate as a parameter measureable at low concentrations, but indicative of concentrated solution viscosity. In this study, a differential viscometry technique is developed to measure the intrinsic viscosity, [η], and the Huggins coefficient, k_h, of protein solutions. To understand the effect of colloidal protein-protein interactions on the viscosity of concentrated protein formulations, the viscometric parameters are compared to k_D and B₂₂ of two mAbs, tuning the contributions of repulsive and attractive forces to the net protein-protein interaction by adjusting solution pH and ionic strength. We find a strong correlation between the concentrated protein solution viscosity and the k_h but this was not observed for the k_D or the b₂₂, which have been previously used as indicators of high concentration viscosity. Trends observed in [η] and k_h values as a function of pH and ionic strength are rationalised in terms of protein-protein interactions.

Replacing the emulsion for bake-on siliconization of containers - comparison of emulsion stability and container performance in the context of protein formulations

Pre-filled syringes have simplified parenteral administration of protein drugs. To ensure an easy and consistent movement of the plunger, the inner glass container surface is typically siliconized. For bake-on siliconization emulsions are sprayed on and heat treated. Due to the European Union regulation REACh (Regulation concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals) the use of certain emulsion components, partially constituting the gold standard Liveo™ 365 35% Dimethicone NF Emulsion (Liveo™ 365), becomes restricted and Liveo™ 366 35% Dimethicone NF Emulsion (Liveo™ 366) has been introduced as an alternative. This change may affect the handling properties as well as the silicone layer formed. The purpose of these studies was to identify any differences that may influence the stability and safety of the final drug/device combination product to enable the use of the new emulsion. We compared silicone emulsions Liveo™ 365 and Liveo™ 366 and dilutions focusing on I) their general physical stability, II) the thermal degradation process of the emulsions and their components, and III) the resulting silicone layer concerning chemistry, morphology, and functionality. The results were linked to the assessment of the final product regarding particle formation and long-term stability. A comparison of the emulsions Liveo™ 365 and Liveo™ 366 for bake-on siliconization is presented to support the transition of the latter as it becomes mandatory with REACh. Our studies show that the two emulsions do not significantly differ with respect to handling and stability, the resultant silicone layer characteristics as well as its functionality. We conclude that the transition to the new emulsion will not significantly impact the final product or the layer performance upon storage and with respect to particle formation.

Freeze-thaw stability of aluminum oxide nanoparticles

The use of inorganic nanoparticles (NPs) gains interest for pharmaceutical applications, e.g. as adjuvants or drug delivery vehicles. Colloidal stability of NPs in aqueous suspensions is a major development challenge. Both frozen and lyophilized liquids are alternative presentations to liquid dispersion. To improve the basic understanding, we investigated the freeze-thawing stability of model α-Al₂O₃ NPs. Freeze-thawing was conducted in three different buffer types at pH5 and 8 without and with additives to determine fundamental formulation principles. Before freeze-thawing, α-Al₂O₃ NPs could be stabilized in sodium citrate buffer at pH5 and 8, and in sodium or potassium phosphate at pH8. Particles revealed low zeta potential values in phosphate buffers at pH5 indicating insufficient electrostatic stabilization. After freeze-thawing, an increase in NP size was strongly reduced in potassium phosphate and sodium citrate buffers. Subsequent pH measurements upon freezing revealed a drastic acidic pH shift in sodium phosphate which was further demonstrated to destabilize NPs. The ionic stabilizers gelatin A/B, Na-CMC, and SDS, were suitable to improve colloidal stability in phosphate buffers at pH5 highlighting the importance of charge stabilization. Freeze-thawing stability was best in presence of gelatin A/B, followed by PVA, mannitol, or sucrose. Depletion and steric stabilization were insufficient using PEG and surfactants respectively. Thus, we could identify the fundamental formulation principles to preserve inorganic NPs upon freezing: i) sufficient charge stabilization, ii) a maintained pH during freezing, and iii) the addition of a suitable stabilizer, preferably gelatin, not necessarily surfactants. This forms the basis for future studies, e.g. on lyophilization.

Formulation, process, and storage strategies for lyophilizates of lipophilic nanoparticulate systems established based on the two models paliperidone palmitate and solid lipid nanoparticles

Lyophilization formulation and process development for lipophilic nanoparticle (NPs) products is highly challenging as the NPs have a low colloidal stability. We compared two different NP types, pure paliperidone palmitate nanocrystals and trimyristin solid lipid nanoparticles regarding formulation, process, and storage stability aspects. Freeze-thaw studies were conducted to investigate the basic formulation aspects such as buffer type, pH, and ionic strength as well as different cryoprotectants. In freeze-drying conventional ramp freezing was performed and compared to freezing with an annealing step added or with controlled ice nucleation. Different formulations were lyophilized and tested for short-term storage stability up to 6 weeks. Samples were analyzed for particle size, subvisible particle number, specific surface area, residual moisture, crystallinity, and glass transition temperature. Sucrose significantly better stabilized both NP types against freeze-thaw stress compared to mannitol demonstrating the importance of a fully amorphous matrix. While the impact of buffer type and pH was negligible, the aggregation propensity of NPs was reduced in presence of NaCl. The freezing step also impacted NP aggregation but the effect was less important than the formulation design. Surfactants did not necessarily improve the colloidal stability but resulted in a lower glass transition temperature of the lyophilizates and may cause phase separation which limits storage stability. This hurdle can be overcome by using a hydroxypropyl-β-cyclodextrin/ sucrose mixture as cryoprotectant. In general, we could show a similar freeze-drying behavior of the two NP types. Thus, we established a formulation and process approach to achieve stable lyophilizates of lipophilic NPs based on two different types of NPs. The general rules should be transferable to other NPs facilitating lyophilization development.

Preparation of high concentration protein powder suspensions by milling of lyophilizates

Pharmaceutical formulations utilizing protein drugs as powders can be used as drug delivery systems in various ways. Besides powders for inhalation, another promising approach is their use as suspensions in non-aqueous liquids for subcutaneous administration providing high protein stability and good injectability. In this study protein powder suspensions were prepared using a swing-mill. Milling of lyophilizates containing a model monoclonal antibody in presence of the suspension vehicle was compared to cryogenic dry milling. Wet media milling led to injectable suspensions, but resulted in monomer loss and increase in protein aggregation. When the lyophilizates were cryogenic dry ball milled less aggregation and monomer loss were detected. Differences related to protein integrity were found for different process parameters, which were successfully optimized. If not cooled with liquid nitrogen, dry milling resulted in increased damage to the mAb. The type of polyol stabilizer, as well as the protein to stabilizer ratio, did not affect the preservation of protein integrity. As finding the right milling duration is time and resource intensive, a correlation between lyophilizate cake hardness and milling duration was established. Based on this approach high concentration lyophilizates were successfully micronized. Suspensions of cryogenic milled powders lead to clogging of 25G needles, which could be prevented by an additional sieving step. Depending on the suspension vehicle, low viscosity formulations (<10 mPa·s) even at high concentrations (≥100 mg/ml protein concentration) were obtained featuring good injectability.