Intrinsic-strain-induced ferroelectric order and ultrafine nanodomains in SrTiO3

Nano ferroelectrics holds the potential application promise in information storage, electro-mechanical transformation, and novel catalysts but encounters a huge challenge of size limitation and manufacture complexity on the creation of long-range ferroelectric ordering. Herein, as an incipient ferroelectric, nanosized SrTiO3 was indued with polarized ordering at room temperature from the nonpolar cubic structure, driven by the intrinsic three-dimensional (3D) tensile strain. The ferroelectric behavior can be confirmed by piezoelectric force microscopy and the ferroelectric TO1 soft mode was verified with the temperature stability to 500 K. Its structural origin comes from the off-center shift of Ti atom to oxygen octahedron and forms the ultrafine head-to-tail connected 90° nanodomains about 2 to 3 nm, resulting in an overall spontaneous polarization toward the short edges of nanoparticles. According to the density functional theory calculations and phase-field simulations, the 3D strain-related dipole displacement transformed from [001] to [111] and segmentation effect on the ferroelectric domain were further proved. The topological ferroelectric order induced by intrinsic 3D tensile strain shows a unique approach to get over the nanosized limitation in nanodevices and construct the strong strain-polarization coupling, paving the way for the design of high-performance and free-assembled ferroelectric devices.

Decoding Active Sites for Highly Efficient Semihydrogenation of Acetylene in Palladium-Copper Nanoalloys

Accurately decoding the three-dimensional atomic structure of surface active sites is essential yet challenging for a rational catalyst design. Here, we used comprehensive techniques combining the pair distribution function and reverse Monte Carlo simulation to reveal the surficial distribution of Pd active sites and adjacent coordination environment in palladium-copper nanoalloys. After the fine-tuning of the atomic arrangement, excellent catalytic performance with 98% ethylene selectivity at complete acetylene conversion was obtained in the Pd34Cu66 nanocatalysts, outperforming most of the reported advanced catalysts. The quantitative deciphering shows a large number of active sites with a Pd-Pd coordination number of 3 distributed on the surface of Pd34Cu66 nanoalloys, which play a decisive role in highly efficient semihydrogenation. This finding not only opens the way for guiding the precise design of bimetal nanocatalysts from atomic-level insight but also provides a method to resolve the spatial structure of active sites.

Correlation of serum DKK1 level with skeletal phenotype in children with osteogenesis imperfecta

PURPOSE

We aim to detect serum DKK1 level of pediatric patients with OI and to analyze its relationship with the genotype and phenotype of OI patients.

METHODS

A cohort of pediatric OI patients and age-matched healthy children were enrolled. Serum levels of DKK1 and bone turnover biomarkers were measured by enzyme-linked immunosorbent assay. Bone mineral density (BMD) was measured by Dual-energy X-ray absorptiometry. Pathogenic mutations of OI were detected by next-generation sequencing and confirmed by Sanger sequencing.

RESULTS

A total of 62 OI children with mean age of 9.50 (4.86, 12.00) years and 29 healthy children were included in this study. The serum DKK1 concentration in OI children was significantly higher than that in healthy children [5.20 (4.54, 6.32) and 4.08 (3.59, 4.92) ng/mL, P < 0.001]. The serum DKK1 concentration in OI children was negatively correlated with height (r = - 0.282), height Z score (r = - 0.292), ALP concentration (r = - 0.304), lumbar BMD (r = - 0.276), BMD Z score of the lumbar spine and femoral neck (r = - 0.32; r = - 0.27) (all P < 0.05). No significant difference in serum DKK1 concentration was found between OI patients with and without vertebral compression fractures. In patients with spinal deformity (22/62), serum DKK1 concentration was positively correlated with SDI (r = 0.480, P < 0.05). No significant correlation was observed between serum DKK1 concentration and the annual incidence of peripheral fractures, genotype and types of collagen changes in OI children.

CONCLUSION

The serum DKK1 level was not only significantly elevated in OI children, but also closely correlated to their skeletal phenotype, suggesting that DKK1 may become a new biomarker and a potential therapeutic target of OI.

Design of Excellent Mechanical Performances and Magnetic Refrigeration via In Situ Forming Dual-Phase Alloys

Magnetic refrigeration technology can achieve higher energy efficiency based on the magnetocaloric effect (MCE). However, the practical application of MCE materials is hindered by their poor mechanical properties, making them challenging to process into devices. Conventional strengthening strategies usually lead to a trade-off with refrigeration capacity reduction. Here, a novel design is presented to overcome this dilemma by forming dual-phase alloys through in situ precipitation of a tough magnetic refrigeration phase within an intermetallic compound with excellent MCE. In the alloy 87.5Gd-12.5Co, incorporating the interconnected tough phase Gd contributes to enhanced strength (≈505 MPa) with good ductility (≈9.2%). The strengthening phase Gd simultaneously exhibits excellent MCE, enabling the alloy to achieve a peak refrigeration capacity of 720 J kg-1. Moreover, the alloy shows low thermal expansion induced by the synergistic effect of the two phases. It is beneficial for maintaining structural stability during heat exchange in magnetic refrigeration. The coupling interaction between the two magnetic phases can broaden the refrigeration temperature range and reduce hysteresis. This study guides the development of new high-performance materials with an excellent combination of mechanical and magnetic refrigeration properties as needed for gas liquefaction and refrigerators.

Exploring negative thermal expansion materials with bulk framework structures and their relevant scaling relationships through multi-step machine learning

Discovering new negative thermal expansion (NTE) materials is a great challenge in experiment. Meanwhile, the machine learning (ML) method can be another approach to explore NTE materials using the existing material databases. Herein, we adopt the multi-step ML method with efficient data augmentation and cross-validation to identify around 1000 materials, including oxides, fluorides, and cyanides, with bulk framework structures as new potential NTE candidate materials from ICSD and other databases. Their corresponding coefficients of negative thermal expansion (CNTE) and temperature ranges are also well predicted. Among them, about 57 materials are predicted to have an NTE probability of 100%. Some predicted NTE materials were tested by the first-principles calculations with quasi-harmonic approximation (QHA), which indicates that the ML results are in good agreement with the first principles calculation results. Based on the comprehensive analysis of the existing and predicted NTE materials, we established three universal relationships of CNTE with an average electronegativity, porosity, and temperature range. From these, we also identified some important critical values characterizing the NTE property, which can serve as an important criterion for designing new NTE materials.

Deteriorated bone microarchitecture caused by sympathetic overstimulation in pheochromocytoma and paraganglioma

PURPOSE

Despite the potentially destructive effect of sympathetic activity on bone metabolism, its impact on bone microarchitecture, a key determinant of bone quality, has not been thoroughly investigated. This study aims to evaluate the impact of sympathetic activity on bone microarchitecture and bone strength in patients with pheochromocytoma and paraganglioma (PPGL).

METHODS

A cross-sectional study was conducted in 38 PPGL patients (15 males and 23 females). Bone turnover markers serum procollagen type 1 N-terminal propeptide (P1NP) and β-carboxy-terminal crosslinked telopeptide of type 1 collagen (β-CTX) were measured. 24-h urinary adrenaline (24hUE) and 24-h urinary norepinephrine levels (24hUNE) were measured to indicate sympathetic activity. High-resolution peripheral quantitative computed tomography (HR-pQCT) was conducted to evaluate bone microarchitecture in PPGL patients and 76 age-, sex-matched healthy controls (30 males and 46 females). Areal bone mineral density (aBMD) was measured by dual-energy X-ray absorptiometry (DXA) simultaneously.

RESULTS

PPGL patients had a higher level of β-CTX. HR-pQCT assessment revealed that PPGL patients had notably thinner and more sparse trabecular bone (decreased trabecular number and thickness with increased trabecular separation), significantly decreased volume BMD (vBMD), and bone strength at both the radius and tibia compared with healthy controls. The deterioration of Tt.vBMD, Tb.Sp, and Tb.1/N.SD was more pronounced in postmenopausal patients compared with the premenopausal subjects. Moreover, subjects in the highest 24hUNE quartile (Q4) showed markedly lower Tb.N and higher Tb.Sp and Tb.1/N.SD at the tibia than those in the lowest quartile (Q1). Age-related bone loss was also exacerbated in PPGL patients to a certain extent.

CONCLUSIONS

PPGL patients had significantly deteriorated bone microarchitecture and strength, especially in the trabecular bone, with an increased bone resorption rate. Our findings provide clinical evidence that sympathetic overstimulation may serve as a secondary cause of osteoporosis, especially in subjects with increased sympathetic activity.

Giant Negative Thermal Expansion in Ultralight NaB(CN)4

Negative thermal expansion (NTE) is crucial for controlling the thermomechanical properties of functional materials, albeit being relatively rare. This study reports a giant NTE (αV ∼-9.2 ⋅ 10-5  K-1 , 100-200 K; αV ∼-3.7 ⋅ 10-5  K-1 , 200-650 K) observed in NaB(CN)4 , showcasing interesting ultralight properties. A comprehensive investigation involving synchrotron X-ray diffraction, Raman spectroscopy, and first-principles calculations has been conducted to explore the thermal expansion mechanism. The findings indicate that the low-frequency phonon modes play a primary role in NTE, and non-rigid vibration modes with most negative Grüneisen parameters are the key contributing factor to the giant NTE observed in NaB(CN)4 . This work presents a new material with giant NTE and ultralight mass density, providing insights for the understanding and design of novel NTE materials.

Antithermal Quenching Upconversion Luminescence via Suppressed Multiphonon Relaxation in Positive/Negative Thermal Expansion Core/Shell NaYF4:Yb/Ho@ScF3 Nanoparticles

Thermal quenching (TQ) has been naturally entangling with luminescence since its discovery, and lattice vibration, which is characterized as multiphonon relaxation (MPR), plays a critical role. Considering that MPR may be suppressed under exterior pressure, we have designed a core/shell upconversion luminescence (UCL) system of α-NaYF4:Yb/Ln@ScF3 (Ln = Ho, Er, and Tm) with positive/negative thermal expansion behavior so that positive thermal expansion of the core will be restrained by negative thermal expansion of the shell when heated. This imposed pressure on the crystal lattice of the core suppresses MPR, reduces the amount of energy depleted by TQ, and eventually saves more energy for luminescing, so that anti-TQ or even thermally enhanced UCL is obtained.

An isotropic zero thermal expansion alloy with super-high toughness

Zero thermal expansion (ZTE) alloys with high mechanical response are crucial for their practical usage. Yet, unifying the ZTE behavior and mechanical response in one material is a grand obstacle, especially in multicomponent ZTE alloys. Herein, we report a near isotropic zero thermal expansion (αl = 1.10 × 10-6 K-1, 260-310 K) in the natural heterogeneous LaFe54Co3.5Si3.35 alloy, which exhibits a super-high toughness of 277.8 ± 14.7 J cm-3. Chemical partition, in the dual-phase structure, assumes the role of not only modulating thermal expansion through magnetic interaction but also enhancing mechanical properties via interface bonding. The comprehensive analysis reveals that the hierarchically synergistic enhancement among lattice, phase interface, and heterogeneous structure is significant for strong toughness. Our findings pave the way to tailor thermal expansion and obtain prominent mechanical properties in multicomponent alloys, which is essential to ultra-stable functional materials.

Regulating luminescence thermal enhancement in negative thermal expansion metal-organic frameworks

Overcoming thermal quenching is generally essential for the practical application of luminescent materials. It has been recently found that frameworks with negative thermal expansion (NTE) could be a promising candidate to engineer unconventional luminescence thermal enhancement. However, the mechanism through which luminescence thermal enhancement can be well tuned remains an open issue. In this work, enabled by altering ligands in a series of UiO-66 derived Eu-based metal-organic frameworks, it was revealed that the changes in the thermal expansion are closely related to luminescence thermal enhancement. The NTE of the aromatic ring part favors luminescence thermal enhancement, while contraction of the carboxylic acid part plays the opposite role. Modulation of functional groups in ligands can change the thermal vibration of aromatic rings and then achieve luminescence thermal enhancement in a wide temperature window. Our findings pave the way to manipulate the NTE and luminescence thermal enhancement based on ligand engineering.

Highly Stable Pt/CeO2 Catalyst with Embedding Structure toward Water-Gas Shift Reaction

Strong metal-support interaction (SMSI) has been extensively studied in heterogeneous catalysis because of its significance in stabilizing active metals and tuning catalytic performance, but the origin of SMSI is not fully revealed. Herein, by using Pt/CeO2 as a model catalyst, we report an embedding structure at the interface between Pt and (110) plane of CeO2, where Pt clusters (∼1.6 nm) are embedded into the lattice of ceria within 3-4 atomic layers. In contrast, this phenomenon is absent in the CeO2(100) support. This unique geometric structure, as an effective motivator, triggers more significant electron transfer from Pt clusters to CeO2(110) support accompanied by the formation of interfacial structure (Ptδ+-Ov-Ce3+), which plays a crucial role in stabilizing Pt nanoclusters. A comprehensive investigation based on experimental studies and theoretical calculations substantiates that the interfacial sites serve as the intrinsic active center toward water-gas shift reaction (WGSR), featuring a moderate strength CO activation adsorption and largely decreased energy barrier of H2O dissociation, accounting for the prominent catalytic activity of Pt/CeO2(110) (a reaction rate of 15.76 molCO gPt-1 h-1 and a turnover frequency value of 2.19 s-1 at 250 °C). In addition, the Pt/CeO2(110) catalyst shows a prominent durability within a 120 h time-on-stream test, far outperforming the Pt/CeO2(100) one, which demonstrates the advantages of this embedding structure for improving catalyst stability.

Genotype-phenotype relationship and comparison between eastern and western patients with osteogenesis imperfecta

PURPOSE

To evaluate the genotypic and phenotypic relationship in a large cohort of OI patients and to compare the differences between eastern and western OI cohorts.

METHODS

A total of 671 OI patients were included. Pathogenic mutations were identified, phenotypic information was collected, and relationships between genotypes and phenotypes were analyzed. Literature about western OI cohorts was searched, and differences were compared between eastern and western OI cohorts.

RESULTS

A total of 560 OI patients were identified as carrying OI pathogenic mutations, and the positive detection rate of disease-causing gene mutations was 83.5%. Mutations in 15 OI candidate genes were identified, with COL1A1 (n = 308, 55%) and COL1A2 (n = 164, 29%) being the most common mutations, and SERPINF1 and WNT1 being the most common biallelic variants. Of the 414 probands, 48.8, 16.9, 29.2 and 5.1% had OI types I, III, IV and V, respectively. Peripheral fracture was the most common phenotype (96.6%), and femurs (34.7%) were most commonly affected. Vertebral compression fracture was observed in 43.5% of OI patients. Biallelic or COL1A2 mutation led to more bone deformities and poorer mobility than COL1A1 mutation (all P < 0.05). Glycine substitution of COL1A1 or COL1A2 or biallelic variants led to more severe phenotypes than haploinsufficiency of collagen type I α chains, which induced the mildest phenotypes. Although the gene mutation spectrum varied among countries, the fracture incidence was similar between eastern and western OI cohorts.

CONCLUSION

The findings are valuable for accurate diagnosis and treatment of OI, mechanism exploration and prognosis judgment. Genetic profiles of OI may vary among races, but the mechanism needs to be explored.

The global burden of lymphoma: estimates from the Global Burden of Disease 2019 study

OBJECTIVES

The aim of this study was to describe the global trends in the burden of lymphoma from 1990 to 2019.

STUDY DESIGN

The data used in this study were from the Global Burden of Disease 2019 study.

METHODS

This study described the age-standardised rates of incidence, prevalence, mortality, years of life lost (YLLs), years lived with disability (YLDs), and disability-adjusted life years (DALYs) of lymphoma (non-Hodgkin and Hodgkin's lymphoma, NHL and HL, respectively) annually from 1990 to 2019, stratified by sociodemographic index (SDI) and 21 world regions. The estimated annual percentage changes in these indexes were calculated.

RESULTS

In 2019, the age-standardised rates of HL per 100,000 population were lower than those of NHL in terms of incidence (1.1 vs 6.7 per 100,000 person-years, respectively) and prevalence (0.3 vs 5.7 per 100,000 person-years, respectively) but not mortality (21.6 vs 3.2 per 100,000 person-years, respectively). From 1999 to 2019, the global incidence of HL decreased and the incidence of NHL increased, and the prevalence of both HL and NHL increased, but the mortality rates decreased. When stratified by SDI, the incidence of HL decreased in all but middle-SDI regions, the mortality rate of HL decreased in all regions, and both the incidence and mortality rate of NHL increased in all but high-SDI regions. The prevalence of HL and NHL increased in all SDI regions, especially in middle-SDI regions. YLLs and DALYs of HL in all SDI regions and those of NHL in high-SDI regions decreased. YLDs slightly increased in middle- to high-SDI regions.

CONCLUSIONS

Lymphoma remains a major public health issue, and better prevention, precise identification, and promising treatments are vitally important.

PTH level might be associated with impaired quality of life in patients with nonsurgical hypoparathyroidism

OBJECTIVE

Nonsurgical hypoparathyroidism (ns-HP) is a rare disease. There are few studies on Quality of Life (QoL) among patients with ns-HP. This study aimed to investigate the QoL among ns-HP patients with regular conventional treatment, and explore the influence factors affecting QoL among these Chinese ns-HP patients.

METHODS

This is a cross-sectional study comparing 101 patients identified as ns-HP and 101 healthy controls. The questionnaires of Short Form 36 Health Survey questionnaire version 2(SF-36v2) were used to evaluate QoL.

RESULTS

Scores of all eight subdomains of SF-36v2 and physical component scores (PCS), mental component scores (MCS) were significantly lower in the ns-HP group compared with the healthy controls. The indices of all subdomains of SF-36v2 between Q1 (the lowest quartile) and Q4 (the highest quartile) groups were compared, suggesting higher percentages of detectable parathyroid hormone (PTH) before treatment in Q4 group among all QoL indices except two subdomains (physical function and body pain).

CONCLUSION

Both mental and physical QoL were impaired in the ns-HP patients even with regular conventional treatment for hypocalcemia, which were more severe in cases with lower baseline PTH levels.

Atomic Three-Dimensional Investigations of Pd Nanocatalysts for Acetylene Semi-hydrogenation

Deciphering the three-dimensional (3D) insight into nanocatalyst surfaces at the atomic level is crucial to understanding catalytic reaction mechanisms and developing high-performance catalysts. Nevertheless, better understanding the inherent insufficiency of a long-range ordered lattice in nanocatalysts is a big challenge. In this work, we report the local structure of Pd nanocatalysts, which is beneficial for demonstrating the shape-structure-adsorption relationship in acetylene hydrogenation. The 5.27 nm spherical Pd catalyst (Pdsph) shows an ethylene selectivity of 88% at complete acetylene conversion, which is much higher than those of the Pd octahedron and Pd cube and superior to other reported monometallic Pd nanocatalysts so far. By virtue of the local structure revelation combined with the atomic pair distribution function (PDF) and reverse Monte Carlo (RMC) simulation, the atomic surface distribution of the unique compressed strain of Pd-Pd pairs in Pdsph was revealed. Density functional theory calculations verified the obvious weakening of the ethylene adsorption energy on account of the surface strain of Pdsph. It is the main factor to avoid the over-hydrogenation of acetylene. The present work, entailing shape-induced surface strain manipulation and atomic 3D insight, opens a new path to understand and optimize chemical activity and selectivity in the heterogeneous catalysis process.

High-density, spontaneous magnetic biskyrmions induced by negative thermal expansion in ferrimagnets

Magnetic skyrmions are topologically protected quasiparticles that are promising for applications in spintronics. However, the low stability of most magnetic skyrmions leads to either a narrow temperature range in which they can exist, a low density of skyrmions, or the need for an external magnetic field, which greatly limits their wide application. In this study, high-density, spontaneous magnetic biskyrmions existing within a wide temperature range and without the need for a magnetic field were formed in ferrimagnets owing to the existence of a negative thermal expansion of the lattice. Moreover, a strong connection between the atomic-scale ferrimagnetic structure and nanoscale magnetic domains in Ho(Co,Fe)3 was revealed via in situ neutron powder diffraction and Lorentz transmission electron microscopy measurements. The critical role of the negative thermal expansion in generating biskyrmions in HoCo3 based on the magnetoelastic coupling effect is further demonstrated by comparing the behavior of HoCo2.8Fe0.2 with a positive thermal expansion.

Calibration of local chemical pressure by optical probe

Chemical stabilization of a high-pressure metastable state is a major challenge for the development of advanced materials. Although chemical pressure (Pchem) can effectively simulate the effect of physical pressure (Pphy), experimental calibration of the pressure passed to local structural motifs, denoted as local chemical pressure (Pchem-Δ) which significantly governs the function of solid materials, remains absent due to the challenge of probing techniques. Here we establish an innovative methodology to experimentally calibrate the Pchem-Δ and build a bridge between Pchem and Pphy via an optical probe strategy. Site-selective Bi3+-traced REVO4 (RE = Y, Gd) is adopted as a prototype to introduce Bi3+ optical probes and on-site sense of the Pchem-Δ experienced by the REO8 motif. The cell compression of RE0.98Bi0.02VO4 under Pphy is chemically simulated by smaller-ion substitution (Sc3+ → RE3+) in RE0.98-xScxBi0.02VO4. The consistent red shift (Δλ) of the emission spectra of Bi3+, which is dominated by locally pressure-induced REO8 dodecahedral variation in RE0.98Bi0.02VO4 (Pphy) and RE0.98-xScxBi0.02VO4 (Pchem-Δ), respectively, is evidence of their similar pressure-dependent local structure evolution. This innovative Δλ-based experimental calibration of Pchem-Δ in the crystal-field dimension portrays the anisotropic transmission of Pchem to the local structure and builds a bridge between Pchem-Δ and Pphy to guide a new perspective for affordable and practical interception of metastable states.

The Structure of Terbium in the Ferromagnetic State

Metals typically crystallize in highly symmetric structures due to their nondirectional and nonsaturated metallic bonds. Here, we report that terbium metal in its ferromagnetic state adopts an unusual low-symmetry orthorhombic structure with a Cmcm space group. A similar structure has been previously observed only in a few actinide metals with bonding 5f electrons at ambient pressure, such as uranium, neptunium, and plutonium, but with different nearest coordination numbers and bond-length variations. The Tb atom occupies the 4c site (0, ∼0.1661, 1/4), building up -[Tb-Tb]- layers stacking along the b-axis. Our first-principles many-body calculations of the crystal field splitting in the correlated Tb 4f-shell demonstrate that the Cmcm structure for ferromagnetic terbium is stabilized by magneto-elastic forces due to a secondary order of quadrupolar moments in the ferromagnetic state. These findings are significant for further understanding of the nature of terbium, including its electron structure, energy bands, phonons, and magnetism.

Interplanar Ferromagnetism Enhanced Ultrawide Zero Thermal Expansion in Kagome Cubic Intermetallic (Zr,Nb)Fe2

A cubic metal exhibiting zero thermal expansion (ZTE) over a wide temperature window demonstrates significant applications in a broad range of advanced technologies but is extremely rare in nature. Here, enabled by high-temperature synthesis, we realize tunable thermal expansion via magnetic doping in the class of kagome cubic (Fd-3m) intermetallic (Zr,Nb)Fe2. A remarkably isotropic ZTE is achieved with a negligible coefficient of thermal expansion (+0.47 × 10-6 K-1) from 4 to 425 K, almost wider than most ZTE in metals available. A combined in situ magnetization, neutron powder diffraction, and hyperfine Mössbauer spectrum analysis reveals that interplanar ferromagnetic ordering contributes to a large magnetic compensation for normal lattice contraction upon cooling. Trace Fe-doping introduces extra magnetic exchange interactions that distinctly enhance the ferromagnetism and magnetic ordering temperature, thus engendering such an ultrawide ZTE. This work presents a promising ZTE in kagome metallic materials.

Giant uniaxial negative thermal expansion in FeZr2 alloy over a wide temperature range

Negative thermal expansion (NTE) alloys possess great practical merit as thermal offsets for positive thermal expansion due to its metallic properties. However, achieving a large NTE with a wide temperature range remains a great challenge. Herein, a metallic framework-like material FeZr₂ is found to exhibit a giant uniaxial (1D) NTE with a wide temperature range (93-1078 K, [Formula: see text]). Such uniaxial NTE is the strongest in all metal-based NTE materials. The direct experimental evidence and DFT calculations reveal that the origin of giant NTE is the couple with phonons, flexible framework-like structure, and soft bonds. Interestingly, the present metallic FeZr₂ excites giant 1D NTE mainly driven by high-frequency optical branches. It is unlike the NTE in traditional framework materials, which are generally dominated by low energy acoustic branches. In the present study, a giant uniaxial NTE alloy is reported, and the complex mechanism has been revealed. It is of great significance for understanding the nature of thermal expansion and guiding the regulation of thermal expansion.

One-step synthesis of MoS2/NiS heterostructures with a stable 1T phase for an efficient hydrogen evolution reaction

Metallic phase (1T) MoS₂ has been regarded as an ideal catalytic material for the hydrogen evolution reaction (HER) due to its high active site density and favorable electrical conductivity. However, the preparation of 1T-phase MoS₂ samples requires tough reaction conditions and 1T-MoS₂ has poor stability under alkaline conditions. In this work, 1T-MoS₂/NiS heterostructure catalysts grown in situ on carbon cloth were prepared by a simple one-step hydrothermal method. The obtained MoS₂/NiS/CC combines the advantages of high active site density and a self-supporting structure, achieving stable 77% metal phase (1T) MoS₂. The combination of NiS and 1T-MoS₂ enhances the intrinsic activity of MoS₂ while the electrical conductivity is improved. These advantages enable the 1T-MoS₂/NiS/CC electrocatalyst to have a low overpotential of 89 mV (@10 mA cm^-2) and a small Tafel slope of 75 mV dec^-1 under alkaline conditions and provide a synthetic strategy of stable 1T-MoS₂-based electrocatalysts for the HER by a heterogeneous structure.

Superior zero thermal expansion dual-phase alloy via boron-migration mediated solid-state reaction

Rapid progress in modern technologies demands zero thermal expansion (ZTE) materials with multi-property profiles to withstand harsh service conditions. Thus far, the majority of documented ZTE materials have shortcomings in different aspects that limit their practical utilization. Here, we report on a superior isotropic ZTE alloy with collective properties regarding wide operating temperature windows, high strength-stiffness, and cyclic thermal stability. A boron-migration-mediated solid-state reaction (BMSR) constructs a salient "plum pudding" structure in a dual-phase Er-Fe-B alloy, where the precursor ErFe₁₀ phase reacts with the migrated boron and transforms into the target Er₂Fe₁₄B (pudding) and α-Fe phases (plum). The formation of such microstructure helps to eliminate apparent crystallographic texture, tailor and form isotropic ZTE, and simultaneously enhance the strength and toughness of the alloy. These findings suggest a promising design paradigm for comprehensive performance ZTE alloys.

Mixed electronic and oxide ionic conduction and migration mechanisms in digermanate La2-xCaxGe2O7-x/2

Mixed electronic and oxide ionic conduction was enabled in digermanate-type La_2-xCa_xGe₂O_7-x/2 containing Ge₃O₁₀ chains and isolated GeO₄ units by substitution of La³⁺ with Ca²⁺. The structure and solid solution limit of Ca doped La₂Ge₂O₇ were studied by systematic experiments, including rotation electron diffraction (RED), X-ray diffraction (XRD) and neutron powder diffraction (NPD) experiments, etc. The preferred occupation of Ca²⁺ and oxygen vacancies was investigated by Rietveld analysis of the NPD data. The obtained conducting material La_1.925Ca_0.075Ge₂O_6.963 exhibits superior thermal stability and an order of magnitude improvement in conductivity compared to the parent La₂Ge₂O₇ (∼9 × 10^-5 S cm^-1 at 1000 °C). BVEL calculations reveal that the oxygen vacancies were stabilized and transported within the framework of La₂Ge₂O₇ by sharing oxygen and oxygen exchange between the adjacent Ge₃O₁₀ chains and GeO₄ units, exhibiting a three-dimensional oxide ion transport nature.

Frenkel Defect-modulated Anti-thermal Quenching Luminescence in Lanthanide-doped Sc2(WO4)3

Although large amount of effort has been invested in combating thermal quenching that severely degrades the performance of luminescent materials particularly at high temperatures, not much affirmative progress has been realized. Herein, we demonstrate that the Frenkel defect formed via controlled annealing of Sc2(WO4)3:Ln (Ln = Yb, Er, Eu, Tb, Sm), can work as energy reservoir and back-transfer the stored excitation energy to Ln3+ upon heating. Therefore, except routine anti-thermal quenching, thermally enhanced 415-fold downshifting and 405-fold upconversion luminescence are even obtained in Sc2(WO4)3:Yb/Er, which has set a record of both the Yb3+-Er3+ energy transfer efficiency (> 85%) and the working temperature at 500 and 1073 K, respectively. Moreover, this design strategy is extendable to other hosts possessing Frenkel defect, and modulation of which directly determines whether enhanced or decreased luminescence can be obtained. This discovery has paved new avenues to reliable generation of high-temperature luminescence.

Ferroelectricity in layered bismuth oxide down to 1 nanometer

Atomic-scale ferroelectrics are of great interest for high-density electronics, particularly field-effect transistors, low-power logic, and nonvolatile memories. We devised a film with a layered structure of bismuth oxide that can stabilize the ferroelectric state down to 1 nanometer through samarium bondage. This film can be grown on a variety of substrates with a cost-effective chemical solution deposition. We observed a standard ferroelectric hysteresis loop down to a thickness of ~1 nanometer. The thin films with thicknesses that range from 1 to 4.56 nanometers possess a relatively large remanent polarization from 17 to 50 microcoulombs per square centimeter. We verified the structure with first-principles calculations, which also pointed to the material being a lone pair-driven ferroelectric material. The structure design of the ultrathin ferroelectric films has great potential for the manufacturing of atomic-scale electronic devices.