Effect of cryogenic treatment on nickel-titanium endodontic instruments

AIM

To investigate the effects of cryogenic treatment on nickel-titanium endodontic instruments. The null hypothesis was that cryogenic treatment would result in no changes in composition, microhardness or cutting efficiency of nickel-titanium instruments.

METHODOLOGY

Microhardness was measured on 30 nickel-titanium K-files (ISO size 25) using a Vicker's indenter. Elemental composition was measured on two instruments using X-ray spectroscopy. A nickel-titanium bulk specimen was analysed for crystalline phase composition using X-ray diffraction. Half of the specimens to be used for each analysis were subjected to a cryogenic treatment in liquid nitrogen (-196 degrees C) for either 3 s (microhardness specimens) or 10 min (other specimens). Cutting efficiency was assessed by recording operator choice using 80 nickel-titanium rotary instruments (ProFile 20, .06) half of which had been cryogenically treated and had been distributed amongst 14 clinicians. After conditioning by preparing four corresponding canals, each pair of instruments were evaluated for cutting efficiency by a clinician during preparation of one canal system in vitro. A Student's t-test was used to analyse the microhardness data, and a binomial test was used to analyse the observer choice data. Composition data were analysed qualitatively.

RESULTS

Cryogenically treated specimens had a significantly higher microhardness than the controls (P < 0.001; beta > 0.999). Observers showed a preference for cryogenically treated instruments (61%), but this was not significant (P = 0.21). Both treated and control specimens were composed of 56% Ni, 44% Ti, 0% N (by weight) with a majority in the austenite phase.

CONCLUSIONS

Cryogenic treatment resulted in increased microhardness, but this increase was not detected clinically. There was no measurable change in elemental or crystalline phase composition.

The ratios of individual chemicals in a mixture determine the degree of joint effect: the climax hypothesis

A new hypothesis, the Climax Hypothesis, is proposed to describe how the ratios of individual chemicals influence the joint effects of chemical mixtures. This hypothesis is derived from a generalized approach using "isobolograms". With this hypothesis, one can predict that for a given mixture, a curvilinear correlation exists between the joint effects and the ratios of individual chemicals and that this curve has a climax at the equitoxic ratio. This prediction is supported by the observed toxicity to Vibrio fischeri of 18 mixtures (12 binary mixtures, 4 ternary mixtures, and 2 quaternary mixtures). With this prediction, the Climax Hypothesis has some promising applications such as controlling the discharge of effluents in environmental science, maximizing detoxifying effects in medicine, and optimizing combined pesticides in agriculture.

Electrochemical characterization of cast Ti-Hf binary alloys

This study characterized the electrochemical behavior of Ti-Hf binary alloys in a simulated oral environment. Ti-Hf alloys (10, 20, 25, 30, 35 and 40 mass% Hf) were prepared by arc-melting titanium sponge and hafnium sponge. Specimens of each alloy (n = 4) were prepared using a dental titanium casting system with a MgO-based investment. Specimens were inspected with X-ray radiography to ensure minimal internal porosity. Castings (n = 4) made from pure titanium and commercially pure titanium were used as controls. The ground flat surface (10 mm x 10 mm) on each specimen where approximately 30 microm was removed was used for the characterization. Sixteen-hour open-circuit potential (OCP) measurement, linear polarization and potentiodynamic cathodic polarization were performed sequentially in aerated (air + 10% CO2) MTZ synthetic saliva at 37 degrees C. Potentiodynamic anodic polarization was conducted in the same medium but deaerated (N2 + 10% CO2) 2 h before and during testing. Polarization resistance (R(P)) and Tafel slopes were determined, as were corrosion current density (I(CORR)) and passive current density (I(PASS)). Results were subjected to nonparametric statistical analysis (alpha = 0.05). The OCP stabilized (mean values -229 mV to -470 mV vs. SCE) for all specimens after the 16-h immersion. Similar passivation was observed for all the metals on their anodic polarization diagrams. The Kruskal-Wallis test showed significant differences in OCP among the test groups (p = 0.006). No significant differences were found in R(P), I(CORR) or I(PASS) among all the metals (p>0.3). Results indicate that the electrochemical behavior of the Ti-Hf alloys examined resembles that of pure titanium.

[Dynamics of fluvo-aquic soil organic matter fractions under long-term fertilization]

By the method of relative density fractionation, this paper studied the dynamics of organic matter and its light and heavy fractions in a fluvo-aquic soil under long-term fertilization. The results indicated under current fertilization system, the contents of soil organic matter and its light and heavy fractions were basically unchanged within 13 successive years of no fertilization, but had an increasing trend with the duration of chemical fertilizer NPK and organic manure applications, with a larger fluctuation among years and a less increment in treatment NPK. Regression analysis showed that soil organic matter and its light and heavy fractions had a linear correlation with the duration of fertilization in treatment NPK, and had a logarithm correlation in treatment organic manure.

Identification of a novel insulin-like growth factor binding protein gene homologue with tumor suppressor like properties

Here we report the identification of a new insulin-like growth factor binding protein homologue, provisionally designated insulin-like growth factor binding related protein-4 (IGFBP-rP4). IGFBP-rP4 was found to be most closely related to IGFBP-7 with 52% amino acid homology and 43% amino acid identity, and shares a similar domain structure. Semi-quantitative RT-PCR expression analysis demonstrated a pattern of downregulation of this gene in multiple tumor samples including lung and colon cancer, compared to matched adjacent normal tissue. Western blotting revealed a protein of approximately 38kDa expressed in both the cell pellet and secreted into the supernatant of transiently transfected Cos-7 cells. Cos-7 supernatants containing IGFBP-RP4 protein were observed to suppress the growth of HeLa cells in culture compared to vector controls. IGFBP-RP4 directly transiently transfected into HeLa cells also further confirmed the growth suppressive properties of this protein. Together these data suggest that IGFBP-RP4 may be a novel putative tumor suppressor protein.

Minocycline attenuates lipopolysaccharide-induced white matter injury in the neonatal rat brain

Our previous studies have shown that intracerebral administration of endotoxin, lipopolysaccharide (LPS), induces selective white matter injury and hypomyelination in the neonatal rat brain and that the LPS-induced brain injury is associated with activation of microglia. To test the hypothesis that inhibition of microglial activation may protect against LPS-induced white matter injury, we examined roles of minocycline, a putative suppressor of microglial activation, on LPS-induced brain injury in the neonatal rat. A stereotactic intracerebral injection of LPS (1 mg/kg) was performed in postnatal day 5 Sprague-Dawley rats and control rats were injected with sterile saline. Minocycline (45 mg/kg) was administered intraperitoneally 12 h before and immediately after LPS injection and then every 24 h for 3 days. Inflammatory responses, activation of microglia and brain injury were examined 1 and 3 days after LPS injection. LPS injection resulted in brain injury in selective brain areas, including bilateral ventricular enlargement, cell death at the sub- and periventricular areas, loss of O4+ and O1+ oligodendrocyte (OL) immunoreactivity and hypomyelination, as indicated by decreased myelin basic protein immunostaining, in the neonatal rat brain. Minocycline administration significantly attenuated LPS-induced brain injury in these rat brains. The protective effect of minocycline was associated with suppressed microglial activation as indicated by the decreased number of activated microglial cells following LPS stimulation and with consequently decreased elevation of interleukin 1beta and tumor necrosis factor-alpha concentrations induced by LPS and a reduced number of inducible nitric oxide synthase expressing cells. Protection of minocycline was also linked with the reduction in LPS-induced oxidative stress, as indicated by 4-hydroxynonenal positive OLs. The overall results suggest that reduction in microglial activation may protect the neonatal brain from LPS-induced white matter injury and inhibition of microglial activation might be an effective approach for the therapeutic treatment of infection-induced white matter injury.

An X-ray nanodiffraction technique for structural characterization of individual nanomaterials

An X-ray micro/nanodiffraction technique that allows structural characterization of individual nanomaterials has been developed at an insertion-device beamline of the Advanced Photon Source. Using the extremely high brightness of the third-generation synchrotron radiation source and advanced high-resolution high-energy zone-plate focusing optics, X-rays of energies from 6 to 12 keV have been focused into a spot smaller than 200 nm with a photon density gain of more than 50,000 so that significant photon flux can be intercepted by a nanoscale material to generate a measurable diffraction signal for structural characterization. This paper describes the instrumentation of the technique and discusses the application of the technique to studies of tin oxide nanobelts.

[Effects of N application and maize growth on N2O emission from soil]

With pot experiment and using static chamber-GC technique, this paper studied the effects of N application (150 and 300 mg x kg(-1) soil) and maize growth on N2O emission from soil. In maize-planted soil, the N2O emission rate increased with increasing N application rate, its peak appeared at seedling stage, and there was no significant correlation between N2O emission and air temperature. Contrarily, in bare soil, the peak of N2O emission rate occurred at the anaphase of the experiment, and there was a significant exponential correlation between N2O emission and air temperature. The total amount of N2O emission increased remarkably with increasing N application rate in both planted and bare soils. In comparing with bare soil, maize-planting reduced N2O emission by 92% and 87%, respectively at high and low N application rates, which suggested that maize-planting not only affected the seasonal variation and magnitude of N2O emission from soil, but also altered the relationship between air temperature and soil N2O emission.

Direct block of the cystic fibrosis transmembrane conductance regulator Cl(-) channel by niflumic acid

Niflumic acid is widely used to inhibit Ca(2+) -activated Cl(-) channels. However, the chemical structure of niflumic acid resembles that of diphenylamine-2-carboxylate, a drug that inhibits the cystic fibrosis transmembrane conductance regulator (CFTR) Cl(-) channel. To investigate how niflumic acid inhibits CFTR Cl(-) channel, we studied recombinant wild-type human CFTR in excised inside-out membrane patches. When added to the intracellular solution, niflumic acid caused a concentration- and voltage-dependent decrease of CFTR Cl(-) current with half-maximal inhibitory concentration (K(i)) of 253 microM and Hill co-efficient of approximately 1, at -50 mV. Niflumic acid inhibition of single CFTR Cl(-) channels was characterized by a very fast, flickery block that decreased dramatically current amplitude without altering open-probability. Consistent with these data, spectral analysis of CFTR Cl(-) currents suggested that channel block by niflumic acid was described by the closed <--> open <--> blocked kinetic scheme with blocker on rate (k(on)) = 13.9 x 10(6) M(-1)s(-1), off rate (k(off))=3348 s(-1) and dissociation constant (K(d)) = 241 microM, at -50 mV. Based on these data, we tested the effects of niflumic acid on transepithelial Cl(-) secretion and cyst growth using type I MDCK epithelial cells. Niflumic acid (200 microM) inhibited cAMP-stimulated, bumetanide-sensitive short-circuit current by 55%. Moreover, the drug potently retarded cyst growth. We conclude that niflumic acid is an open-channel blocker of CFTR that inhibits Cl(-) permeation by plugging the channel pore. It or related agents might be of value in the development of new therapies for autosomal dominant polycystic kidney disease.

Prevention of murine acute graft-versus-host disease by recipient-derived TGFβ1-treated dendritic cells

Acute graft-versus-host disease (GVHD) remains the major barrier to allogeneic bone marrow transplantation (allo-BMT). Evidence has accumulated that transforming growth factor beta1-treated dendritic cells (TGFbeta-DC), deficient in surface costimulatory molecules, inhibit alloantigen-specific T-cell responses and induce graft hyporeactivity. To analyze the effect of TGFbeta-DC on GVHD after allo-BMT, 5.0 x 10(6) recipient-derived TGFbeta-DC were injected into C57BL/6 (H-2b) with bone marrow-splenocyte grafts from major histocompatibility complex (MHC) disparate BALB/c mice (H-2d). Survival analysis showed TGFbeta-DC cotransplantation resulted in significant prolongation of allograft survival, namely a mean survival time (MST) of 44.3 +/- 4.5 days, versus the untreated MST of 9.5 +/- 0.6 days (P < .01). However, mature DC aggravated the GVHD with an MST of 6.6 +/- 0.6 days (P < .01). In addition, the third-party C3H-derived TGFbeta-DC did not enhance the survival rate (MST = 9.7 +/- 0.5 days). Furthermore, serum IFN-gamma, IL-12, and IL-18 levels in TGFbeta-DC cotransplanted mice were reduced compared with untreated BMT hosts, while serum IL-10 levels were not changed. These results suggest that TGFbeta-DC cotransplantation may attenuate the severity of GVHD after BMT.

[Methods for studying soil microbial diversity]

This paper gave a review on the main methods for studying soil microbial diversity. Traditionally, the analysis of soil microbial communities relied on culturing techniques, using a variety of culture media. However, only a small fraction of the soil microbial community has been cultured and isolated with this approach. Other methods such as Biolog GN analysis, phospholipids fatty acids analysis and nucleic acid-based analysis can be used to study and characterize soil microbes which currently cannot be cultured, and to get more and complete information about soil microbial community.

Cytotoxicity of commercial and novel binary titanium alloys with and without a surface-reaction layer

Titanium-based alloys form a surface reaction layer when cast. This study investigated the effect of the surface reaction layer on the cytotoxicity of novel Ti-based binary alloys. The cytotoxicities of the novel alloys were compared with commercially pure titanium, Ti-6Al-4V and Ti-6Al-7Nb. Cast discs with or without the reaction layer were first tested for cytotoxicity, then for elemental release into cell-culture medium. The elements released into the extracts were measured by means of an inductively coupled plasma atomic emission spectrometer. The commercial and novel binary Ti-based alloys showed no statistically significant cytotoxicity, although some trends were noted for several alloys. The presence of the reaction layer did not significantly alter the cytotoxicity. These favourable biocompatibility results show that these novel alloys have promise for use in dental restorations.

SEM/EDS evaluation of porcelain adherence to gold-coated cast titanium

The adhesion between titanium and dental porcelain is related to the diffusion of oxygen to the reaction layer formed on cast-titanium surfaces during porcelain firing. The diffusion of oxygen could be suppressed by coating the titanium surface with a thin gold layer. This study characterized the effects of gold coating on titanium-ceramic adhesion. ASTM grade II CP titanium was cast into a MgO-based investment (Selevest CB, Selec). The specimen surfaces were air abraded with 110-microm Al(2)O(3) particles. Gold coating was applied on titanium surfaces by three methods: gold-paste (Deck Gold NF, Degussa-Ney) coating and firing at 800 degrees C for three times, single gold-paste coating and firing followed by sputter coating (40 mA, 500 s), and sputter coating (40 mA, 1000 s). Surfaces only air abraded with Al(2)O(3) particles were used as controls. An ultra-low-fusing dental porcelain (Vita Titankeramik, Vident) was fused on titanium surfaces. Specimen surfaces were characterized by SEM/EDS and XRD. The titanium-ceramic adhesion was evaluated by a biaxial flexure test (N = 8), and area fraction of adherent porcelain (AFAP) was determined by EDS. Numerical results were statistically analyzed by one-way ANOVA and the Student-Newman-Keuls test at alpha = 0.05. SEM fractography showed a substantial amount of porcelains remaining on the gold-sputter-coated titanium surfaces. A new Au(2)Ti phase was found on gold-coated titanium surface after the firing. Significantly higher (p <.05) AFAP values were determined for the gold-sputter-coated specimens compared to the others. No significant differences were found among the other groups and the control. Results suggested that gold coatings used in this study are not effective barriers to completely protect titanium from oxidation during the porcelain firing, and porcelain adherence to cast titanium can be improved by gold-sputter coating used in the present study.

Leaching from solid waste incineration ashes used in cement-treated base layers for pavements

Waste incineration bottom ash and treated flue gas cleaning products mixed with 2.5% of cement (50 kg/m3) were tested in the laboratory in terms of compressive strength and tank leaching tests over a 64-day period. Although the material displayed lower mechanical strength than a reference concrete, the strength still was sufficient for use as a base layer for roads. The metal content in the incineration-residue-based specimens was up to 100 times higher than in the reference concrete, suggesting that the mixed waste incineration residue should be used only for dedicated purposes. The leaching of Cl and Na was increased by a factor of 20-100 from the incineration-residue-based specimens as compared to the reference, while the leaching of K, Ca and SO4 was increased by a factor of 2-10. The leaching of heavy metals was also higher from the incineration-residue-based specimens than from the reference with respect to Cu (50 times), Cd, Pb and Zn (5 times), but not with respect to Cr and Ni. The leaching curves did only allow for a closer evaluation of the leaching process in a few cases. The physical retention of the constituents seemed to be the same in the reference as in the incineration-residue-based specimens. Heavy metal leaching was limited by enhanced chemical retention in the incineration-residue-specimens as compared to the reference. Since no quality criteria in terms of leaching from a monolithic material are currently available, the leaching issue must be evaluated case by case.

[Effects of rice plants on methane emission from paddy fields]

Methane emission from rice paddy fields is the net result of the combination of many processes, i.e., CH4 production, CH4 oxidation and CH4 transportation in paddy soil. Rice plants play a key role in the CH4 emission from paddy fields, particularly in all the processes involved. The positive and negative effects of rice plants on CH4 emission from paddy fields are well recognized as the main factors influencing the temporal variation of CH4 emission flux in paddy field. Process-based studies about the effects of rice plants on methane emission from paddy fields were summarized, and different roles of rice plants on this emission were discussed. Root exudates and litters of rice plants could serve as the substrate for methanogenesis and enhance the CH4 production of paddy soils, resulting in a high CH4 emission peak, particularly in rice late growing season. Rhizospheric CH4 oxidation induced by rice root-excreted oxygen constitutes a main biogenic sink of CH4, which could account for 36-90% of CH4 produced in paddy soil over the entire growing season of rice. Up to 80% and more of CH4 released from rice field during a growing season could be emitted by rice plant-mediated transport. The fully developed aerenchyma of rice plants could be of importance in CH4 emission during rice growing seasons, and responsible for the CH4 emission peak observed at rice early growing season.

Corrosion behavior of cast titanium with reduced surface reaction layer made by a face-coating method

This study characterized the corrosion behavior of cast CP titanium made with a face-coating method. Wax patterns were coated with oxide slurry of Y(2)O(3) or ZrO(2) before investing with a MgO-based investment. Three surface preparations were tested: ground, sandblasted, and as-cast. Uncoated castings served as controls. Sixteen-hour open circuit potential (OCP) measurement, linear polarization and potentiodynamic cathodic polarization were performed in an aerated modified Tani-Zucchi synthetic saliva at 37 degrees C. Anodic polarization was conducted in the same deaerated medium. Polarization resistance (R(p)) and Tafel slopes were determined. Corrosion current density was calculated for each specimen. Results (n=4) were subjected to nonparametric statistical analysis (alpha=0.05). Cross sections of cast specimens were examined by optical microscopy. Energy dispersive spectroscopy (EDS) spot analysis was performed at various depths below the surface. The OCP stabilized within several hours for all the specimens. Apparent differences in anodic polarization behavior were observed among the different surfaces. A distinctive wide passive region followed by breakdown was seen on specimens with ground and sandblasted surfaces. There were no significant differences in the corrosion resistance among the control and the two face-coating groups for each group. The Mann-Whitney test showed significantly lower OCP and higher R(p) values for ground surfaces. The surface condition significantly affected the corrosion behavior more than the face coating methods. In most cases, specimens with as-cast surfaces exhibited the least corrosion resistance during the potentiodynamic anodic polarization.

Vascular endothelial growth factor (VEGF) expression and the effect of exogenous VEGF on survival of a random flap in the rat

The induction of endogenous vascular endothelial growth factor (VEGF) production in the skin flap with ischemic injury and the effect of exogenous VEGF on survival of the ischemic skin flap were studied in rats. A dorsal flap model (3x10 cm(2)) was used in this study. In Part I, biopsies were taken from the flap at 2.5, 5.5, and 8.5 cm distances from the distal edge at 0, 6, 12, and 24 h after the flaps were sutured. Malonyldialdehyde (MDA) and VEGF(165) protein level were measured. In Part II, exogenous VEGF (1 microg/ml) was injected subdermally into the flaps in 14 rats before the flaps were replaced. Flaps that received a saline injection were used as the controls. The skin paddle survival was measured on postoperative day five. The results showed that the MDA level in the distal part of the flap significantly increased at 24 h postoperatively when compared to MDA in other parts of the flap. However, VEGF levels in the distal part of the flap significantly decreased when compared to the middle part of the flap. Subdermal injection of exogenous VEGF to the distal area of the flap could significantly improve survival of the distal flap (89% of total skin paddle) when compared to the control, which had a 64% mean percent survival. We conclude that production of endogenous VEGF protein is significantly increased in the skin flap with mild ischemia, but decreased in the flap with severe ischemia. Administration of exogenous VEGF could significantly enhance survival of ischemic flaps.

[Effect of plants on methane production, oxidation and emission]

The paper reviewed the role of plants in the processes of methane production, oxidation and emission in soils. It was the abilities of different plants to excrete the quantity and quality of root exudates that resulted in discrepancies of methane production among plants and in plant growing seasons. The oxygen magnitude of the downward transport through the plant aerenechyma, which, in turn, also acted as a conduit for methane from the soil to the atmosphere, affected endogenous methane oxidation capacity with plants and with plant growing seasons. Plant through changing amount and density of plant aerenchyma altered its ability to transport methane from soil to atmosphere. In addition to soil properties, flux and pattern of methane emission from soils largely depended on plant abilities to excrete exudates and oxygen, and transport methane in different plant growing seasons.

[Factors influencing CH4 emissions from a permanently flooded rice field during rice growing period]

Permanently flooded rice fields are the rice fields which emit the largest amount of CH4 in China. A 6-years (1995-2000) measurement carried out in a permanently flooded rice field in Chongqing, China showed that draining floodwater in winter and planting upland crops, either winter wheat or rape, instead of fallow under flooded conditions not only stopped CH4 emission during the winter season, but also mitigated CH4 emission during following rice growing period. CH4 emission could also be mitigated by ridge-cultivation. By using the results obtained from 1998-2000, statistical analysis indicated a significant relationship between the mean CH4 emission over the rice growing period and averaged soil moisture in winter season, which explained 56% of the variation of the CH4 emissions among the years and treatments. The averaged soil moisture (0-20 cm) in winter season and soil temperature (5 cm) over the rice growing period explained 78% of the variation. The significance of soil moisture in winter season in CH4 emission during the following rice growing period was further demonstrated by a lysimeter experiment. The relationships implied that the precipitation during non-rice growing period, which dominates soil moisture at a large spatial scale, and the soil temperature during the rice growing period would be the main factors controlling the annual variation of CH4 emissions from rice fields.

[Effect of temperature on methane production and oxidation in soils]

The influence of temperature and its mechanism on methane production and oxidation in soils were reviewed in this paper. Temperature can alter the soil ability to produce methane through changing types of dominant methanogens in archaeal community. Dominant methanogen is Methanosarcinaceae at higher temperature which can utilize both H2/CO2 and acetate as the precursor to produce methane, while Methanosaetaceae at lower temperature which only use acetate as the precursor and produce far less methane than do Methanosarcinaceae. Increasing soil temperature apparently raises soil ability to produce methane, which is called temperature effectiveness and expressed as Q10 with a range from 1.5 to 28 and an average of 4.1. There is an obviously positive correlation between temperature effectiveness (Q10) on methane production and substrate content. As compared to methane production, effect of temperature on methane oxidation is lower, which may be related to the strong affinity of methanotrophs for methane.

Key factors affecting spatial variation of methane emissions from freshwater marshes

To understand the mechanism for spatial variation of CH(4) emissions from marshes grown with different type of plants in a region and plots within a certain marsh grown with one type of plants, we measured CH(4) emissions from a region in which eutrophic freshwater marshes were divided into three types: Carex lasiocarpa, Carex meyeruana and Deyeuxia angustifolia according to plant type as well as CH(4) concentration in porewater, aboveground plant biomass and stem density in situ in Sanjiang Plain of Northeast China in August 2001. Spatial variation of CH(4) emissions from both different marshes in a region and different plots within a certain marsh was high. The flux rates of CH(4) emissions from three marshes ranged from 17.2 to 66.5 mg CH(4) m(-2)h(-1) with 34.76% of variation coefficient, whereas the values in Carex lasiocarpa, Carex meyeriana and Deyeuxia angustifolia marshes varied from 21.6 to 66.5 (39.61%), from 17.2 to 45.0 (29.26%) and from 19.1 to 33.0 mg CH(4) m(-2)h(-1) (17.51%), respectively. Both the flux rates and spatial variation of CH(4) emissions strongly increased as standing water depth increased significantly. Standing water depth greatly governed the spatial variation of CH(4) emissions from different marshes in a region by changing the amount of plant litters inundated in standing water, which provided labile organic C for methanogens and controlled CH(4) concentrations in porewater. Moreover, the aboveground plant biomass determined spatial variation of CH(4) emissions from plots within a certain marsh by controlling the pathways (stem density) of CH(4) emissions from the marsh into the atmosphere.