Salicylhydrazine-containing inhibitors of HIV-1 integrase: implication for a selective chelation in the integrase active site

In previous studies we identified N,N'-bis(salicylhydrazine) (1) as a lead compound against purified recombinant HIV-1 integrase. We have now expanded upon these earlier observations and tested 45 novel hydrazides. Among the compounds tested, 11 derivatives exhibited 50% inhibitory concentrations (IC50) of less than 3 microM. A common feature for activity among these inhibitors is the hydroxyl group of the salicyl moiety. Although the active inhibitors must contain this hydroxyl group, other structural modifications can also influence potency. Removal of this hydroxyl group or replacement with an amino, bromo, fluoro, carboxylic acid, or ethyl ether totally abolished potency against integrase. Several asymmetric structures exhibited similar potency to the symmetric lead inhibitor 1. The superimposition of the lowest-energy conformations upon one another revealed three sites whose properties appear important for ligand binding. Site A is composed of the 2-hydroxyphenyl, the alpha-keto, and the hydrazine moieties in a planar conformation. We propose that this site could interact with HIV-1 integrase by chelation of the metal in the integrase active site as inhibition of HIV-1 integrase catalytic activity and DNA binding were strictly Mn2+-dependent. The hydrophobic sites B and C are probably responsible for complementarity of molecular shape between ligand and receptor. Our data indicate that only those compounds which possessed sites A, B, and C in a linear orientation were potent inhibitors of HIV-1 integrase. Although all the active inhibitors possessed considerable cytotoxicity and no apparent antiviral activity in CEM cells, the study presents useful information regarding ligand interaction with HIV-1 integrase protein.

Three new structures of the core domain of HIV-1 integrase: an active site that binds magnesium

HIV-1 integrase is an essential enzyme in the life cycle of the virus, responsible for catalyzing the insertion of the viral genome into the host cell chromosome; it provides an attractive target for antiviral drug design. The previously reported crystal structure of the HIV-1 integrase core domain revealed that this domain belongs to the superfamily of polynucleotidyltransferases. However, the position of the conserved catalytic carboxylic acids differed from those observed in other enzymes of the class, and attempts to crystallize in the presence of the cofactor, Mg2+, were unsuccessful. We report here three additional crystal structures of the core domain of HIV-1 integrase mutants, crystallized in the presence and absence of cacodylate, as well as complexed with Mg2+. These three crystal forms, containing between them seven independent core domain structures, demonstrate the unambiguous extension of the previously disordered helix alpha4 toward the amino terminus from residue M154 and show that the catalytic E152 points in the general direction of the two catalytic aspartates, D64 and D116. In the vicinity of the active site, the structure of the protein in the absence of cacodylate exhibits significant deviations from the previously reported structures. These differences can be attributed to the modification of C65 and C130 by cacodylate, which was an essential component of the original crystallization mixture. We also demonstrate that in the absence of cacodylate this protein will bind to Mg2+, and could provide a satisfactory platform for binding of inhibitors.

Structure-based mutational analysis of the C-terminal DNA-binding domain of human immunodeficiency virus type 1 integrase: critical residues for protein oligomerization and DNA binding

The C-terminal domain of human immunodeficiency virus type 1 (HIV-1) integrase (IN) is a dimer that binds to DNA in a nonspecific manner. The structure of the minimal region required for DNA binding (IN220-270) has been solved by nuclear magnetic resonance spectroscopy. The overall fold of the C-terminal domain of HIV-1 IN is similar to those of Src homology region 3 domains. Based on the structure of IN220-270, we studied the role of 15 amino acid residues potentially involved in DNA binding and oligomerization by mutational analysis. We found that two amino acid residues, arginine 262 and leucine 234, contribute to DNA binding in the context of IN220-270, as indicated by protein-DNA UV cross-link analysis. We also analyzed mutant proteins representing portions of the full-length IN protein. Amino acid substitution of residues located in the hydrophobic dimer interface, such as L241A and L242A, results in the loss of oligomerization of IN; consequently, the levels of 3' processing, DNA strand transfer, and intramolecular disintegration are strongly reduced. These results suggest that dimerization of the C-terminal domain of IN is important for correct multimerization of IN.

Cloning and sequencing of ISC1041 from the archaeon Sulfolobus solfataricus MT-4, a new member of the IS30 family of insertion elements

A genomic fragment containing the insertion sequence ISC1041 has been cloned by PCR from the archaeon Sulfolobus solfaricus MT-4, an extremophilic microorganism which grows at 87 degrees C. The 1038 bp ISC1041 element contains an imperfect 18 nt repeat and a long open reading frame which encodes a polypeptide of 311 amino acid residues. The translated amino acid sequence shows a significant similarity to IS30-like transposases. Structural analysis indicates that ISC1041 is a novel member of the IS30 family and displays the DDE motif not previously seen in Archaea. This motif is believed to be involved in the integration mechanism of many mobile elements. As this motif is present in several integrases and transposases which, despite the lack of overall protein homologies, share topological homologies to the DDE motif, a common ancestor has been proposed. The finding of an IS30-like transposase in the archaeal kingdom may have relevance for horizontal gene transfer.

Biochemical characterization of the HIV-1 integrase 3'-processing activity and its inhibition by phosphorothioate oligonucleotides

To better understand HIV-1 integrase (IN) functions, we determined the kinetic parameters of the 3'-processing reaction. Steady-state kinetic analysis performed using Dixon plots indicated that the concentration of active enzyme was 10-fold lower than that calculated by protein determination. The turnover number was low, suggesting that IN remained bound to DNA after cleavage. The catalytic efficiency increased 10-fold from 30 to 37 degrees C and 2-fold from 37 to 42 degrees C. In enzyme assays carried out at 37 degrees C, both single- and double-stranded phosphorothioate oligos bound to IN with an efficiency comparable to that of the phosphodiester duplex substrate. The competition efficiency of single-stranded oligos was directly related to the sequence length. On the other hand, phosphorothioate duplex U5 LTRs modified in the plus strand were capable of both competing with the substrate and directly inhibiting the 3'-processing activity. These results suggest that, in addition to other modes of action (inhibition of gp120-CD4 interaction and reverse transcriptase), phosphorothioate hetero- and homopolimeric oligos also potently inhibit the IN activity.

Photo-cross-linking studies suggest a model for the architecture of an active human immunodeficiency virus type 1 integrase-DNA complex

The virally encoded integrase protein carries out retroviral integration, which requires specific interactions with the two ends of the viral DNA, and also with host DNA that is the target of integration. We attached a photo-cross-linking agent to specific viral and target DNA sites to identify regions of the integrase polypeptide that are in close proximity to those substrate features in the active integrase-DNA complex. The active form of integrase is a multimer. The higher-order organization of the active integration complex was therefore investigated by determining whether specific cross-links occurred to the active-site containing protomer. Both viral and target DNA cross-links to human immunodeficiency virus type 1 (HIV-1) integrase mapped predominantly to integrase protomers in trans to the active site, in a multimeric integrase complex. The results provide the basis for a model of the protein-DNA architecture of an active HIV-1 integration complex that suggests specific functions for the N-terminal, core, and C-terminal domains of retroviral integrase. One implication of this model is that the integrase multimer that mediates concerted integration of the viral DNA ends is composed of at least eight integrase protomers.

Mutational scan of the human immunodeficiency virus type 2 integrase protein

Retroviral integrase (IN) cleaves linear viral DNA specifically near the ends of the DNA (cleavage reaction) and subsequently couples the processed ends to phosphates in the target DNA (integration reaction). In vitro, IN catalyzes the disintegration reaction, which is the reverse of the integration reaction. Ideally, we would like to test the role of each amino acid in the IN protein. We mutagenized human immunodeficiency virus type 2 IN in a random way using PCR mutagenesis and generated a set of mutants in which 35% of all residues were substituted. Mutant proteins were tested for in vitro activity, e.g., site-specific cleavage of viral DNA, integration, and disintegration. Changes in 61 of the 90 proteins investigated showed no phenotypic effect. Substitutions that changed the choice of nucleophile in the cleavage reaction were found. These clustered around the active-site residues Asp-116 and Glu-152. We also found alterations of amino acids that affected cleavage and integration differentially. In addition, we analyzed the disintegration activity of the proteins and found substitutions of amino acids close to the dimer interface that enhanced intermolecular disintegration activity, whereas other catalytic activities were present at wild-type levels. This study shows the feasibility of investigating the role of virtually any amino acid in a protein the size of IN.

Identification of a nucleotide binding site in HIV-1 integrase

HIV-1 integrase is essential for viral replication and can be inhibited by antiviral nucleotides. Photoaffinity labeling with the 3'-azido-3'-deoxythymidine (AZT) analog 3',5-diazido-2', 3'-dideoxyuridine 5'-monophosphate (5N3-AZTMP) and proteolytic mapping identified the amino acid 153-167 region of integrase as the site of photocrosslinking. Docking of 5N3-AZTMP revealed the possibility for strong hydrogen bonds between the inhibitor and lysines 156, 159, and 160 of the enzyme. Mutation of these residues reduced photocrosslinking selectively. This report elucidates the binding site of a nucleotide inhibitor of HIV-1 integrase, and possibly a component of the enzyme polynucleotide binding site.

Helical and coiled-coil-forming properties of peptides derived from and inhibiting human immunodeficiency virus type 1 integrase assessed by 1H-NMR--use of NH temperature coefficients to probe coiled-coil structures

Human immunodeficiency virus type 1 integrase (HIV-1 IN) which catalyzes viral DNA integration into the host genome of infected cells represents an attractive target for AIDS therapy. We have previously demonstrated the ability of the IN-(147-175)-peptide derived from the catalytic core domain of HIV-1 IN to inhibit the enzyme activity in vitro. IN-(147-175)-peptide contains four heptad repeats and displays a high propensity for coiled-coil formation while its [P159]IN-(147-175)-peptide analog (Lys159-->Pro in the protein, Lys13-->Pro in the peptide) is unable to form a stable coiled-coil and is devoid of inhibitory activity [Sourgen, F., Maroun, R. G., Frère, V., Bouziane, M., Auclair, C., Troalen, F. & Fermandjian, S. (1996) Eur. J. Biochem. 240, 765-773]. Now, we report results from an NMR study on IN-(147-175)-peptide and [P159]IN-(147- 175)-peptide as well as on an optimized [E156, A163, A167]IN-(147-175)-peptide that is a better inhibitor of IN than IN-(147-175)-peptide. While in aqueous solution, IN-(147-175)-peptide and [P159]IN-(147-175)-peptide display only nascent helical features, [E156, A163, A167]IN-(147-175)-peptide exhibits 20% of helical content. In 20% trifluoroethanol/80% H2O, the helix content is the highest for [E156, A163, A167]IN-(147-175)-peptide (approximately 70%) and the lowest for [P159]IN-(147-175)-peptide (approximately 40%), due to a local helix break caused by the Pro residue. The NHs of residues in the two central helical heptads (a-g) of IN-(147-175)-peptide and [E156, A163, A167]IN-(147-175)-peptide display a regular periodic variation of their temperature coefficients in 20% trifluoroethanol. The b, c and f residues on the hydrophilic face of the amphipathic helix show high coefficients reflecting hydrogen bonded NHs, while the a and d residues on the hydrophobic face exhibit low coefficients, near random-coil values. The particular arrangement of the hydrophobic side-chains of a and d residues at the coiled-coil interface reduces the access of trifluoroethanol molecules to their amide groups. The inability of trifluoroethanol molecules to create interactions with the amide C=O groups, these being required to strengthen the intrahelical C=O...H-N hydrogen bonds, is the main cause for observation of heptadic a and d residues with low NH temperature coefficients. Such effects concern mostly the two central helical heptads of IN-(147-175)-peptide and [E156, A163, A167]IN-(147-175)-peptide implying that these ones are engaged in stable parallel coiled coils. Our results provide a link between the propensity of peptides for helix formation, their coiled-coil properties and their efficiency to inhibit IN.

Displacement of viral DNA termini from stable HIV-1 integrase nucleoprotein complexes induced by secondary DNA-binding interactions

The human immunodeficiency virus type-1 (HIV-1) integrase is known to form a highly stable interaction with the termini of the linear, pre-integrated retroviral genome, where it catalyzes the 3'-OH processing and strand transfer processes required for their coordinated integration into host DNA. Here, we determine that the association of HIV-1 integrase with the viral DNA termini leads to the formation of two classes of nucleoprotein complexes with distinct properties in vitro. Both bound states are intrinsically stable and highly resistant to exonuclease digestion, but nonetheless they exhibit different stabilities in the presence of single-stranded polynucleotides. While a population of preassembled complexes tolerates elevated polynucleotide concentrations, the remainder forms an unstable ternary (integrase-substrate-polynucleotide) intermediate, leading to the rapid expulsion of the otherwise tightly bound substrate. The distribution of complexes between the two states is influenced by the preincubation time and temperature, increases in either of which favor the formation of the challenge-resistant species. Challenge-resistant complexes are formed more efficiently with Mn2+ than with Mg2+ and are sensitive to the length rather than the sequence of the DNA substrate. Due to the delayed appearance of the challenge-resistant form after the initial stable binding of the DNA substrate, our results may be indicative of a structural change in the preassembled complex which thereby modulates its response to exogenous DNA targets.

An efficient and cost-effective isotope labeling protocol for proteins expressed in Escherichia coli

A cost-effective protocol for uniform 15N and/or 13C isotope labeling of bacterially expressed proteins is presented. Unlike most standard protocols, cells are initially grown in a medium containing nutrients at natural abundance and isotopically labeled nutrients are only supplied at the later stages of growth and during protein expression. This permits the accumulation of a large cell mass without the need to employ expensive isotopically labeled nutrients. The abrupt decrease in oxygen consumption that occurs upon complete exhaustion of essential nutrients is used to precisely time the switch between unlabeled and labeled nutrients. Application of the protocol is demonstrated for wild-type and a mutant of the N-terminal zinc-binding domain of HIV-1 integrase.

Critical contacts between HIV-1 integrase and viral DNA identified by structure-based analysis and photo-crosslinking

Analysis of the crystal structure of HIV-1 integrase reveals a cluster of lysine residues near the active site. Using site-directed mutagenesis and photo-crosslinking we find that Lys156 and Lys159 are critical for the functional interaction of integrase with viral DNA. Mutation of Lys156 or Lys159 to glutamate led to a loss of both 3' processing and strand transfer activities in vitro while maintaining the ability to interact with nonspecific DNA and support disintegration. However, mutation of both residues to glutamate produced a synergistic effect eliminating nearly all nonspecific DNA interaction and disintegration activity. In addition, virus containing either of these changes was replication-defective at the step of integration. Photo-crosslinking, using 5-iododeoxyuracil-substituted oligonucleotides, suggests that Lys159 interacts at the N7 position of the conserved deoxyadenosine adjacent to the scissile phosphodiester bond of viral DNA. Sequence conservation throughout retroviral integrases and certain bacterial transposases (e.g. Tn10/IS10) supports the premise that within those families of polynucleotidyl transferases, these residues are strategic for DNA interaction.

Characterization of human immunodeficiency virus type 1 integrase mutants expressed in Escherichia coli

The eight mutant integrase (IN) proteins of human immunodeficiency virus type (HIV-1), which have a single point mutation at a highly conserved central region, were prepared, and characterized in terms of their endonucleolytic activities and disintegration activities in vitro. Mutation of two highly conserved amino acids, Asp116 or Glu152, leads to complete loss of both the activities, suggesting that these two amino acids are directly associated with enzymatic functions. In addition, the mutant of the position Ser147 was found to have highly depressed endonucleolytic activity showing that the reaction was very delayed in comparison with that of the wild type. However, significant disintegration was detected in the mutant Ser147, indicating that the enzymatic mechanisms of the endonucleolytic and disintegration activities are not exactly reverse. The integrase protein with a mutation at the conserved amino acid Asn117 or Gly118 had a slight loss of the endonucleolytic activity, while a mutation at the three positions, Tyr143, Ser153, and Lys159, had no detectable effect on their enzymatic activities. These results indicate that only a few of the conserved amino acids are critical for enzymatic activities.

Ion selective folding of loop domains in a potent anti-HIV oligonucleotide

Previously, we have described inhibition of HIV-1 infection by T30177, 5'-(GTGGTGGGTGGGTGGGT)-3', an oligonucleotide that is a potent inhibitor of HIV-1 integrase in vitro (Mazumder et al. (1996) Biochemistry 35, 13762). Here a family of oligonucleotides, analogs of T30177, has been studied. On the basis of thermal denaturation, we show that a folded structure of T30177 is much more stable than that of the thrombin binding aptamer, which only differs with T30177 in the loop sequence. Sequence changes reveal that loop interactions are solely responsible for this observed stability difference. In the presence of K+ ion, the fold of T30695, a designed 16mer derivative, is indeed more stable than T30177. Loop folding within T30695 is very ion selective. Quantitative analysis of thermal denaturation suggests that the loops of T30695, 5'-(GGGTGGGTGGGTGGGT)-3', and T30177 confer the ability to coordinate three equivalents of K+ ion (one bound to the core octet and two bound to the loops); however, the thrombin binding aptamer is shown to bind only one K+ equivalent. Folding kinetics and CD titration demonstrate that K+-induced folding of T30695 and T30177 is a two-step process, consistent with a sequential model in which a first equivalent of K+ binds to the octet core, followed by slow K+-induced rearrangement of the loop domains. Comparing structural stability with the capacity of the folded oligomers to inhibit the HIV-1 integrase enzyme in vitro or HIV-1 infection in cell culture, we have found that the folding and activity data are highly correlated, suggesting that formation of an orderly, ion-coordinated loop structure similar to that in T30177 or T30695 may be a prerequisite for both integrase inhibition and anti-HIV-1 activity.

The solution structure of the amino-terminal HHCC domain of HIV-2 integrase: a three-helix bundle stabilized by zinc

BACKGROUND

Integrase mediates a crucial step in the life cycle of the human immunodeficiency virus (HIV). The enzyme cleaves the viral DNA ends in a sequence-dependent manner and couples the newly generated hydroxyl groups to phosphates in the target DNA. Three domains have been identified in HIV integrase: an amino-terminal domain, a central catalytic core and a carboxy-terminal DNA-binding domain. The amino-terminal region is the only domain with unknown structure thus far. This domain, which is known to bind zinc, contains a HHCC motif that is conserved in retroviral integrases. Although the exact function of this domain is unknown, it is required for cleavage and integration.

RESULTS

The three-dimensional structure of the amino-terminal domain of HIV-2 integrase has been determined using two-dimensional and three-dimensional nuclear magnetic resonance data. We obtained 20 final structures, calculated using 693 nuclear Overhauser effects, which display a backbone root-mean square deviation versus the average of 0.25 A for the well defined region. The structure consists of three alpha helices and a helical turn. The zinc is coordinated with His 12 via the N epsilon 2 atom, with His16 via the N delta 1 atom and with the sulfur atoms of Cys40 and Cys43. The alpha helices form a three-helix bundle that is stabilized by this zinc-binding unit. The helical arrangement is similar to that found in the DNA-binding domains of the trp repressor, the prd paired domain and Tc3A transposase.

CONCLUSION

The amino-terminal domain of HIV-2 integrase has a remarkable hybrid structure combining features of a three-helix bundle fold with a zinc-binding HHCC motif. This structure shows no similarity with any of the known zinc-finger structures. The strictly conserved residues of the HHCC motif of retroviral integrases are involved in metal coordination, whereas many other well conserved hydrophobic residues are part of the protein core.

Mapping features of HIV-1 integrase near selected sites on viral and target DNA molecules in an active enzyme-DNA complex by photo-cross-linking

The virally encoded integrase protein carries out retroviral integration, and to do so, it must make specific interactions with both viral and target DNA sequences. The retroviral integrase has three domains: an amino-terminal region of about 50 amino acids that contains a zinc finger-like motif, a tightly folded, phylogenetically conserved core domain that contains the active site, and a carboxy-terminal domain that can bind DNA in a nonspecific manner. The complete roles of the amino- and carboxyl-terminal domains have not yet been determined, but they appear to participate in multimerization and nonspecific or target DNA binding, respectively. The number and identity of integrase's DNA binding sites have been difficult to determine by conventional mutagenesis studies. In this report, we describe a photo-cross-linking approach to address these issues. Our findings suggest that HIV-1 integrase contacts with conserved features of the viral DNA end are likely to be mediated by residues in two peptides within the conserved core domain. Additional cross-links were seen between viral DNA and the carboxy-terminal DNA binding domain. Numerous sites in integrase, including peptides in each of the three domains, could be cross-linked to target DNA features. Integrase is known to function as a multimer, and it remains to be determined which specific contacts are in cis or trans with respect to the active site.

Solution structure of the N-terminal zinc binding domain of HIV-1 integrase

The solution structure of the N-terminal zinc binding domain (residues 1-55; IN1-55) of HIV-1 integrase has been solved by NMR spectroscopy. IN1-55 is dimeric, and each monomer comprises four helices with the zinc tetrahedrally coordinated to His 12, His 16, Cys 40 and Cys 43. IN1-55 exists in two interconverting conformational states that differ with regard to the coordination of the two histidine side chains to zinc. The different histidine arrangements are associated with large conformational differences in the polypeptide backbone (residues 9-18) around the coordinating histidines. The dimer interface is predominantly hydrophobic and is formed by the packing of the N-terminal end of helix 1, and helices 3 and 4. The monomer fold is remarkably similar to that of a number of helical DNA binding proteins containing a helix-turn-helix (HTH) motif with helices 2 and 3 of IN1-55 corresponding to the HTH motif. In contrast to the DNA binding proteins where the second helix of the HTH motif is employed for DNA recognition, IN1-55 uses this helix for dimerization.

A metal-induced conformational change and activation of HIV-1 integrase

Retroviral integrases are composed of three independently folding domains whose organization relevant to one another is largely unknown. As an approach to understanding its structure, we have investigated the effect of the required metal cofactor(s), Mn2+ or Mg2+, on the conformation of human immunodeficiency virus type 1 (HIV-1) integrase (IN) using monoclonal antibodies (mAbs) that are specific for each of these three domains. Upon the addition of increasing concentrations of the divalent cations to immobilized HIV-1 IN in ELISA assays, binding of mAbs specific for either the C-terminal domain or for an epitope in the catalytic core domain was lost, whereas binding of an N terminus-specific mAb was unaffected. Size exclusion chromatography of a nonaggregating derivative of HIV-1 IN showed that the oligomeric state of the protein did not change under conditions in which recognition of the core and C terminus-specific mAbs was lost. Preincubation with Mn2+ increased the resistance of HIV-1 IN to proteolytic digestion and produced a digestion pattern that was significantly different from that observed with the apoprotein. A derivative that lacked the N-terminal domain, IN(50-288), exhibited the same metal-dependent changes observed with the full-length protein, whereas the isolated catalytic core domain IN(50-212) did not. From this we conclude that the metal-induced conformational change comprises a reorganization of the core and C-terminal domains. Preincubation with Mn2+ increased the specific activity of HIV-1 IN 5-fold. Enzymatic activity was inhibited by the conformation-sensitive C terminus-specific mAb, but this inhibition was reduced greatly if the enzyme was first preincubated with metal ions. Thus, it appears that apo-HIV-1 IN exists predominantly in an inactive conformation that is converted into a catalytically competent form upon the addition of metal ions.

HIV integrase: a target for AIDS therapeutics

HIV integrase catalyses the incorporation of virally derived DNA into the human genome. This unique step in the virus life cycle provides a variety of points for intervention and hence is an attractive target for the development of new therapeutics for the treatment of AIDS. In this review we summarize current knowledge of the function of this enzyme and discuss some of the obstacles to the development of appropriate drugs.

Diarylsulfones, a novel class of human immunodeficiency virus type 1 integrase inhibitors

A majority of reported human immunodeficiency virus type 1 integrase (HIV-1 IN) inhibitors are polyhydroxylated aromatic compounds containing two phenyl rings separated by aliphatic or aromatic linkers. Most inhibitors possessing a catechol moiety exhibit considerable toxicity in cellular assays. In an effort to identify nonhydroxylated analogs, a series of aromatic sulfones were tested for their ability to inhibit the 3' processing and strand transfer steps that are necessary for HIV replication. Several aromatic sulfones have previously been shown to have moderate activity against HIV-1 reverse transcriptase in cellular assays; however, their inhibitory potencies against IN have not been explored. In the present study, the inhibitory effect of a series of sulfones and sulfonamides against IN was determined. Among 52 diaryl sulfones tested, 4 were determined to be highly potent (50% inhibitory concentration [IC50], 0.8 to 10 micrograms/ml), 5 had good potencies (IC50, 11 to 50 micrograms/ml), 10 showed moderate potencies (IC50, 51 to 100 micrograms/ml), and 33 were inactive (IC50, > 100 micrograms/ml) against IN. All of the active compounds exhibited similar potencies against HIV-2 IN. Sulfa drugs, used extensively in treating Pneumocystis carinii pneumonia, a leading cause of morbidity and mortality in AIDs patients, were also examined. Among 19 sulfonamides tested, sulfasalazine (IC50, 50 micrograms/ml) was the most potent. We conclude that potent inhibitors of IN can be designed based on the results presented in this study.

Indeterminate human immunodeficiency virus type 1 western blot may indicate an abortive infection in some low-risk blood donors

BACKGROUND

The infectious status of persons with an indeterminate human immunodeficiency virus type 1 (HIV-1) Western blot must be established.

STUDY DESIGN AND METHODS

Evaluation of the CD4 and CD8 T-cell subsets and the expression of HIV-1-integrated sequences by Southern blot and polymerase chain reaction were studied in a group of low-risk subjects with an indeterminate Western blot.

RESULTS

From a total of 45,000 blood donors and 50 patients with chronic renal failure on hemodialysis who were tested during the period of 1985 through 1990, 50 sera (0.1%) had an indeterminate Western blot. A low CD4:CD8 ratio (0.7-1.2) was detected in 14 of 24 tested subjects, whereas the unfractionated and adherence-enriched cells of 7 (32%) and 5 (23%) of 22 patients, respectively, could be stained with a p24 monoclonal antibody. A transient positive culture was detected in 3 of 20 subjects, but these viral isolates could not be transmitted to CEM-A310 cells. Ultracentrifuged culture supernatants hybridized under high-stringency conditions with genomic gag-pol (4 cases), env (3 cases), and tat (1 case) cDNA fragments of the HXB2 HIV-1 clone. In one case, DNA obtained from adherent but not unfractionated mononuclear cells contained 3.3- and 3.9-kb env- and gag-pol-related HIV-1 sequences, respectively; these sequences were heavier than expected. Polymerase chain reaction analysis for gag and pol but not env sequences was positive in 1 and 2 of 7 cases, respectively. A female patient with a positive viral culture and who was positive for pol in polymerase chain reaction demonstrated a full seroconversion 19 months later.

CONCLUSION

The results strongly suggest that, rarely, some low-risk subjects with indeterminate Western blot results might be infected with low-level replicative strains or HIV-related viruses; thus, an exhaustive immunologic and virologic workup is needed for the investigation of these subjects.

The catalytic domain of human immunodeficiency virus integrase: ordered active site in the F185H mutant

We solved the structure and traced the complete active site of the catalytic domain of the human immunodeficiency virus type 1 integrase (HIV-1 IN) with the F185H mutation. The only previously available crystal structure, the F185K mutant of this domain, lacks one of the catalytically important residues, E152, located in a stretch of 12 disordered residues [Dyda et al. (1994) Science 266, 1981-1986]. It is clear, however, that the active site of HIV-1 IN observed in either structure cannot correspond to that of the functional enzyme, since the cluster of three conserved carboxylic acids does not create a proper metal-binding site. The conformation of the loop was compared with two different conformations found in the catalytic domain of the related avian sarcoma virus integrase [Bujacz et al. (1995) J. Mol. Biol. 253, 333-346]. Flexibility of the active site region of integrases may be required in order for the enzyme to assume a functional conformation in the presence of substrate and/or cofactors.

Reversion of a human immunodeficiency virus type 1 integrase mutant at a second site restores enzyme function and virus infectivity

The integration of a DNA copy of the retroviral RNA genome into the host cell genome is essential for viral replication. The virion-associated integrase protein, encoded by the 3' end of the viral pol gene, is required for integration. Stable virus-producing T-cell lines were established for replication-defective human immunodeficiency virus type 1 carrying single amino acid substitutions at conserved residues in the catalytic domain of integrase. Phenotypically reverted virus was detected 12 weeks after transfection with the integrase mutant carrying the P-109-->S mutation (P109S). Unlike the defective P109S virus, the revertant virus (designated P109SR) grew in CD4+ SupT1 cells. In addition to the Ser substitution at Pro-109, P109SR had a second substitution of Ala for Thr at position 125 in integrase. Site-directed mutagenesis was used to show that the P109S T125A genotype was responsible for the P109SR replication phenotype. The T125A substitution also rescued the in vitro enzyme activities of recombinant P109S integrase protein. P109S integrase did not display detectable 3' processing or DNA strand transfer activity, although 5 to 10% of wild-type disintegration activity was detected. P109S T125A integrase displayed nearly wild-type levels of 3' processing, DNA strand transfer, and disintegration activities, confirming that T125A is a second-site intragenic suppressor of P109S. P109S integrase ran as a large aggregate on a size exclusion column, whereas wild-type integrase ran as a monomer and P109S T125A integrase ran as a mixed population. Pro-109 and Thr-125 are not immediately adjacent in the crystal structure of the integrase catalytic domain. We suggest that the T125A substitution restores integrase function by stabilizing a structural alteration(s) induced by the P109S mutation.

Zinc folds the N-terminal domain of HIV-1 integrase, promotes multimerization, and enhances catalytic activity

The N-terminal domain of HIV-1 integrase contains a pair of His and Cys residues (the HHCC motif) that are conserved among retroviral integrases. Although His and Cys residues are often involved in binding zinc, the HHCC motif does not correspond to any recognized class of zinc binding domain. We have investigated the binding of zinc to HIV-1 integrase protein and find that it binds zinc with a stoichiometry of one zinc per integrase monomer. Analysis of zinc binding to deletion derivatives of integrase locates the binding site to the N-terminal domain. Integrase with a mutation in the HHCC motif does not bind zinc, consistent with coordination of zinc by these residues. The isolated N-terminal domain is disordered in the absence of zinc but, in the presence of zinc, it adopts a secondary structure with a high alpha helical content. Integrase bound by zinc tetramerizes more readily than the apoenzyme and is also more active than the apoenzyme in in vitro integration assays. We conclude that binding of zinc to the HHCC motif stabilizes the folded state of the N-terminal domain of integrase and bound zinc is required for optimal enzymatic activity.