Collective migration under hydrodynamic interactions: a computational approach

We consider a generic model for cell motility. Even if a comprehensive understanding of cell motility remains elusive, progress has been achieved in its modelling using a whole-cell physical model. The model takes into account the main mechanisms of cell motility, actin polymerization, actin-myosin dynamics and substrate mediated adhesion (if applicable), and combines them with steric cell-cell and hydrodynamic interactions. The model predicts the onset of collective cell migration, which emerges spontaneously as a result of inelastic collisions of neighbouring cells. Each cell here modelled as an active polar gel is accomplished with two vortices if it moves. Upon collision of two cells, the two vortices which come close to each other annihilate. This leads to a rotation of the cells and together with the deformation and the reorientation of the actin filaments in each cell induces alignment of these cells and leads to persistent translational collective migration. The effect for low Reynolds numbers is as strong as in the non-hydrodynamic model, but it decreases with increasing Reynolds number.

Dynamic association of calcium channel subunits at the cellular membrane

High voltage gated calcium channels (VGCCs) are composed of at least three subunits, one pore forming [Formula: see text]-subunit, an intracellular [Formula: see text]-variant, and a mostly extracellular [Formula: see text]-variant. Interactions between these subunits determine the kinetic properties of VGCCs. It is unclear whether these interactions are stable over time or rather transient. Here, we used single-molecule tracking to investigate the surface diffusion of [Formula: see text]- and [Formula: see text]-subunits at the cell surface. We found that [Formula: see text]-subunits show higher surface mobility than [Formula: see text]-subunits, and that they are only transiently confined together, suggesting a weak association between [Formula: see text]- and [Formula: see text]-subunits. Moreover, we observed that different [Formula: see text]-subunits engage in different degrees of association with the [Formula: see text]-subunit, revealing the tighter interaction of [Formula: see text] with [Formula: see text]. These data indicate a distinct regulation of the [Formula: see text] interaction in VGCC subtypes. We modeled their membrane dynamics in a Monte Carlo simulation using experimentally determined diffusion constants. Our modeling predicts that the ratio of associated [Formula: see text]- and [Formula: see text]-subunits mainly depends on their expression density and confinement in the membrane. Based on the different motilities of particular [Formula: see text]-subunit combinations, we propose that their dynamic assembly and disassembly represent an important mechanism to regulate the signaling properties of VGCC.

The interaction of protein-coated bionanoparticles and surface receptors reevaluated: how important is the number of bonds?

Specifically designed bionanoparticles with a function-oriented protein-coating layer interact with self-prepared receptor surfaces as the counterpart. Based on surface plasmon resonance biosensing experiments, a model framework is validated to estimate the number of bonds formed between these bionanoparticles and the receptor surface based on multivalent interactions. Our multi-site kinetic model is able to analyze the adsorption rate constants and the number of bonds from experimental data of natural and synthetic bionanoparticles. The influence of the mass transport on the adsorption kinetics is modeled including a diffusional boundary layer where a helpful analytical solution has been derived. Our model framework extends previous studies to include a higher number of bonds, ranging from 1 up to 1000. An almost linear relationship between the number of bonds and the adsorption amount of bionanoparticles makes the model framework suitable to predict, for example, ligand density and to further assess coating performance. The proposed model framework can serve as a design tool for multivalent interaction experiments under variable process conditions.

Binding kinetics and multi-bond: Finding correlations by synthesizing interactions between ligand-coated bionanoparticles and receptor surfaces

The number of bonds formed between one single bionanoparticle and many surface receptors is an important subject to be studied but is seldom quantitatively investigated. A new evaluation of the correlation between binding kinetics and number of bonds is presented by varying ligand density and receptor density. An experimental system was developed using measurements with surface plasmon resonance spectroscopy. A corresponding multi-site adsorption model elucidated the correlation. The results show that with the increase of the receptor density, the adsorption rate first decreased when the number of bonds was below a maximum value and then increased when the number of bonds stayed at this maximum value. The investigation on ligand density variation suggests that the coating density on top of the bionanoparticle surface may have a particular value below which more ligand will accelerate the adsorption rate. The ratio of ligand amount bound by the receptors to the total ligand amount associated with a single bionanoparticle will remain constant even if one attaches more ligands to a bionanoparticle. We envision that the bionanoparticle desorption will not depend on density changes from either ligand or receptor when the number of bonds reaches a specific efficient value.

A mechanism for cell motility by active polar gels

We analyse a generic motility model, with the motility mechanism arising by contractile stress due to the interaction of myosin and actin. A hydrodynamic active polar gel theory is used to model the cytoplasm of a cell and is combined with a Helfrich-type model to account for membrane properties. The overall model allows consideration of the motility without the necessity for local adhesion. Besides a detailed numerical approach together with convergence studies for the highly nonlinear free boundary problem, we also compare the induced flow field of the motile cell with that of classical squirmer models and identify the motile cell as a puller or pusher, depending on the strength of the myosin-actin interactions.

Surface dynamics of voltage-gated ion channels

Neurons encode information in fast changes of the membrane potential, and thus electrical membrane properties are critically important for the integration and processing of synaptic inputs by a neuron. These electrical properties are largely determined by ion channels embedded in the membrane. The distribution of most ion channels in the membrane is not spatially uniform: they undergo activity-driven changes in the range of minutes to days. Even in the range of milliseconds, the composition and topology of ion channels are not static but engage in highly dynamic processes including stochastic or activity-dependent transient association of the pore-forming and auxiliary subunits, lateral diffusion, as well as clustering of different channels. In this review we briefly discuss the potential impact of mobile sodium, calcium and potassium ion channels and the functional significance of this for individual neurons and neuronal networks.

Identification of cholinergic chemosensory cells in mouse tracheal and laryngeal glandular ducts

Specialized epithelial cells in the respiratory tract such as solitary chemosensory cells and brush cells sense the luminal content and initiate protective reflexes in response to the detection of potentially harmful substances. The majority of these cells are cholinergic and utilize the canonical taste signal transduction cascade to detect "bitter" substances such as bacterial quorum sensing molecules. Utilizing two different mouse strains reporting expression of choline acetyltransferase (ChAT), the synthesizing enzyme of acetylcholine (ACh), we detected cholinergic cells in the submucosal glands of the murine larynx and trachea. These cells were localized in the ciliated glandular ducts and were neither found in the collecting ducts nor in alveolar or tubular segments of the glands. ChAT expression in tracheal gland ducts was confirmed by in situ hybridization. The cholinergic duct cells expressed the brush cell marker proteins, villin and cytokeratin-18, and were immunoreactive for components of the taste signal transduction cascade (Gα-gustducin, transient receptor potential melastatin-like subtype 5 channel = TRPM5, phospholipase C(β2)), but not for carbonic anhydrase IV. Furthermore, these cells expressed the bitter taste receptor Tas2r131, as demonstrated utilizing an appropriate reporter mouse strain. Our study identified a previously unrecognized presumptive chemosensory cell type in the duct of the airway submucosal glands that likely utilizes ACh for paracrine signaling. We propose that these cells participate in infection-sensing mechanisms and initiate responses assisting bacterial clearance from the lower airways.

Mobility of calcium channels in the presynaptic membrane

Unravelling principles underlying neurotransmitter release are key to understand neural signaling. Here, we describe how surface mobility of voltage-dependent calcium channels (VDCCs) modulates release probabilities (P(r)) of synaptic vesicles (SVs). Coupling distances of <10 to >100 nm have been reported for SVs and VDCCs in different synapses. Tracking individual VDCCs revealed that within hippocampal synapses, ∼60% of VDCCs are mobile while confined to presynaptic membrane compartments. Intracellular Ca(2+) chelation decreased VDCC mobility. Increasing VDCC surface populations by co-expression of the α2δ1 subunit did not alter channel mobility but led to enlarged active zones (AZs) rather than higher channel densities. VDCCs thus scale presynaptic scaffolds to maintain local mobility. We propose that dynamic coupling based on mobile VDCCs supports calcium domain cooperativity and tunes neurotransmitter release by equalizing Pr for docked SVs within AZs.

Spinal cord compression: an unusual presentation of hepatocellular carcinoma

Hepatocellular carcinoma is the 5^th most common cancer in men and the 2^nd common cause of death from cancer worldwide. The tumour commonly metastasizes to the lungs, regional lymph nodes and bone. Spinal cord compression secondary to metastatic disease as a first presentation is uncommon. We describe a patient who presented with paraplegia as a first presentation of hepatocellular carcinoma. 46 year old Namibian man presented with progressive leg weakness that was associated with a dull back ache and inability to pass urine and stool. He had no history of trauma nor did he have chronic cough, night sweats or fevers. He has been treated several times for alcohol dependence. On examination he was wasted, power 0/5 in both lower limbs and a sensory level at T12. He also had a non-tender hepatomegaly with Alpha-fetoprotein of 2000. The Chest X-ray and Chest CT showed nodular opacities indicating metastatic disease and the X-ray and CT of the thoracic spine showed osteolytic lesion with destruction of the pedicle of L1. Liver and spinal biopsy confirmed the hepatocellular carcinoma. The extra hepatic manifestations of HCC are diverse and Spinal cord metastasis is of pertinent clinical importance and should thus be greatly considered.

Vierzähnige Benzamidin-Liganden in ein-und mehrkemigen Kupfer(II)-Komplexen / Quadridentate Benzamidine Ligands in Mono-and Oligonuclear Copper(II) Complexes

Bridged N-thiocarbamoyl substituted bis-benzamidines (C2H5)2N-C(S)-N=C(Ph)-NH-R-NH-C(Ph)=N-C(S)-N(C2H5)2 with different moieties R (H2L1 : R = diphenylmethane-2,2'-diyl, H2 L2: R = diphenylmethane-3,3'-diyl, and H2L3: R = diphenylmethane-4,4'-diyl) were synthe­sized by the reaction of N-(thiocarbamoyl)benzimidoyl chlorides with diamines. These quadri­ dentate ligands form neutral mononuclear (CuL1), dinuclear (Cu2L3 2) and trinuclear (Cu3L2 3) copper(II) chelates in dependence of the different bridging unit in the ligands. The compounds were characterized by NMR, IR, EPR and XPS spectroscopy and FAB mass spectrometry. The molecular structures of the ligand H2L3 and the complex CuL1 have been determined by X-ray methods.

Zur Existenz von [ReNCl4-nFn]- (n = 1-3) Nitridorhenat(VI)-Gemischt- ligandkomplexen -Eine EPR-Untersuchung / EPR Evidence of [ReNCl4-n FnJ– (n = 1-3) Nitridorhenate(VI) Mixed-Ligand Complexes

The formation of mixed-ligand complexes of the type [ReVlNCl4-nFn]- (n = 1 -3) during the reaction of [ReVINCl4]- with [n-(C4H9)4N]F, KF, and HF is reported. Evidence of the individual mixed-ligand compounds is given by their EPR spectral data. In frozen solutions a specific dependence of the EPR data on the composition of the coordination sphere could be detected. This is shown (i) by a nearly linear dependence of gII and AII Re on the Cl/F-content of the [ReVINCl4-nFn]- unit (additivity rules) and (ii) by well-resolved 19F hyperfine splittings.

Nonvasoconstrictive hemoglobin particles as oxygen carriers

Artificial oxygen carriers, favorably hemoglobin-based oxygen carriers (HBOCs), are being investigated intensively during the last 30 years with the aim to develop a universal blood substitute. However, serious side effects mainly caused by vasoconstriction triggered by nitric oxide (NO) scavenging due to penetration of nanosized HBOCs through the endothelial gaps of the capillary walls and/or oxygen oversupply in the precapillary arterioles due to their low oxygen affinity led to failure of clinical trials and FDA disapproval. To avoid these effects, HBOCs with a size between 100 and 1000 nm and high oxygen affinity are needed. Here we present for the first time unique hemoglobin particles (HbPs) of around 700 nm with high oxygen affinity and low immunogenicity using a novel, highly effective, and simple technique. The fabrication procedure provides particles with a narrow size distribution and nearly uniform morphology. The content of hemoglobin (Hb) in the particles corresponded to 80% of the Hb content in native erythrocytes. Furthermore, we demonstrate a successful perfusion of isolated mouse glomeruli with concentrated HbP suspensions in vitro. A normal, nonvasoconstrictive behavior of the afferent arterioles is observed, suggesting no oxygen oversupply and limited NO scavenging by these particles, making them a highly promising blood substitute.

Skeletal muscle uncoupling-induced longevity in mice is linked to increased substrate metabolism and induction of the endogenous antioxidant defense system

Ectopic expression of uncoupling protein 1 (UCP1) in skeletal muscle (SM) mitochondria increases lifespan considerably in high-fat diet-fed UCP1 Tg mice compared with wild types (WT). To clarify the underlying mechanisms, we investigated substrate metabolism as well as oxidative stress damage and antioxidant defense in SM of low-fat- and high-fat-fed mice. Tg mice showed an increased protein expression of phosphorylated AMP-activated protein kinase, markers of lipid turnover (p-ACC, FAT/CD36), and an increased SM ex vivo fatty acid oxidation. Surprisingly, UCP1 Tg mice showed elevated lipid peroxidative protein modifications with no changes in glycoxidation or direct protein oxidation. This was paralleled by an induction of catalase and superoxide dismutase activity, an increased redox signaling (MAPK signaling pathway), and increased expression of stress-protective heat shock protein 25. We conclude that increased skeletal muscle mitochondrial uncoupling in vivo does not reduce the oxidative stress status in the muscle cell. Moreover, it increases lipid metabolism and reactive lipid-derived carbonyls. This stress induction in turn increases the endogenous antioxidant defense system and redox signaling. Altogether, our data argue for an adaptive role of reactive species as essential signaling molecules for health and longevity.

Fluidic microchemomechanical integrated circuits processing chemical information

Lab-on-a-chip (LOC) technology has blossomed into a major new technology fundamentally influencing the sciences of life and nature. From a systemic point of view however, microfluidics is still in its infancy. Here, we present the concept of a microfluidic central processing unit (CPU) which shows remarkable similarities to early electronic Von Neumann microprocessors. It combines both control and execution units and, moreover, the complete power supply on a single chip and introduces the decision-making ability regarding chemical information into fluidic integrated circuits (ICs). As a consequence of this system concept, the ICs process chemical information completely in a self-controlled manner and energetically self-sustaining. The ICs are fabricated by layer-by-layer deposition of several overlapping layers based on different intrinsically active polymers. As examples we present two microchips carrying out long-term monitoring of critical parameters by around-the-clock sampling.

Adaptive diffuse domain approach for calculating mechanically induced deformation of trabecular bone

Remodelling of trabecular bone is essentially affected by the mechanical load of the trabeculae. Mathematical modelling and simulation of the remodelling process have to include time-consuming calculations of the displacement field within the complex trabecular structure under loading. We present an adaptive diffuse domain approach for calculating the elastic bone deformation based on micro computer tomogram data of real trabecular bone structures and compared it with a conventional voxel-based finite element method. In addition to allowing for higher computational efficiency, the adaptive approach is characterised by a very smooth representation of the bone surface, which suggests that this approach would be suitable as a basis for future simulations of bone resorption and formation processes within the trabecular structure.

Microlenses with defined contour shapes

Ink-jet printing of optical ink over SU-8 pillars is here proposed as a technology for obtaining microlenses with shape control. To demonstrate the flexibility of this method, microlenses with five different contour shapes (ranging from circular and elliptical to toric or more advanced geometries) have been fabricated. Furthermore, the optical properties of the different fabricated lenses have been experimentally investigated. Focal distance, numerical aperture (NA) and full-width at half maximum (FWHM) of the microlenses have been determined. Arrays of microlenses showed an identical behavior with a standard deviation in the total intensity of only 7%. Additionally, the focal plane of the fabricated symmetric microlenses and the Sturm interval of the non-symmetric ones have been obtained. The experimental results demonstrate the validity and flexibility of the proposed technology.