Microfabricated ultrarapid desalting device for nanoelectrospray ionization mass spectrometry

Salt removal is a prerequisite for electrospray ionization mass spectrometry (ESI-MS) analysis of biological samples. Rapid desalting and a low volume connection to an electrospray tip are required for time-resolved measurements. We have developed a microfabricated desalting device that meets both requirements, thus providing the foundational technology piece for transient ESI-MS measurements of complex biological liquid specimens. In the microfabricated device, the sample flows in a channel separated from a higher flow rate, salt-free counter solution by a monolithically integrated nanoporous alumina membrane, which can support pressure differences between the flow channels of over 600 kPa. Salt is removed by exploiting the large difference in diffusivities between salts and the typical ESI-MS target bioanalytes, e.g., peptides and proteins. We demonstrate the capability to remove 95% of salt from a sample solution in ∼1 s while retaining sufficiently high concentration of a relatively low molecular weight protein, cytochrome-c, for ESI-MS detection.

[STENTING VERSUS PALLIATIVE SURGERY IN PATIENTS WITH MALIGNANT GASTROINTESTINAL STENOSIS]

AIM

Retrospective analysis of the results of stenting versus surgical palliation in patients with malignant gastrointestinal stenosis.

MATERIAL AND METHODS

85 patients underwent endoscopic stenting (41) or surgical intervention (44). Level of stenosis: gastric outlet (23/38), multi-level gastric obstruction (2/3), duodenum or jejunum (12/3), gastrojejunoanastomosis (3/0) and gastroduodenoanastomosis (1/0). 49 self-expanding metal stents were implanted in 41 patients. 41 gastroenteroanastomoses and 3 jejunostomas were performed in surgical group.

RESULTS

Stents were successfully inserted in all patients. Early complications were observed in 3 (7.3%) patients after stenting and in 9 (20.5%) after surgical palliation, p = 0.0755. Postoperative lethality was 2,4% (1 patient) after stenting and 31.8% (14 patients) after surgery, p = 0.0003. Mean hospital stay was 15 days in stenting group and 23 days in surgical group, p < 0.001. There was no statistically significant difference in long-term results, neither in late complications (p = 0.3691), nor in survival (p =0.3697).

CONCLUSION

Endoscopic placement of self-expanding stents is an effective method of restoration of oral intake in patients with malignant gastrointestinal obstruction. Stenting is associated with equal rates of early and late complications, lower mortality and decreased in-hospital stay as compared with surgery, and therefore may be recommended as a final palliation in inoperable patients.

Controlling the physicochemical state of carbon on graphene using focused electron-beam-induced deposition

Focused electron-beam-induced deposition (FEBID) is a promising nanolithography technique using "direct-write" patterning by carbon line and dot deposits on graphene. Understanding interactions between deposited carbon molecules and graphene enables highly localized modification of graphene properties, which is foundational to the FEBID utility as a nanopatterning tool. In this study, we demonstrate a unique possibility to induce dramatically different adsorption states of FEBID-produced carbon deposits on graphene, through density functional theory calculations and complementary Raman experiments. Specifically, an amorphous carbon deposit formed by direct irradiation of high energy primary electrons exhibits unusually strong interactions with graphene via covalent bonding, whereas the FEBID carbon formed due to low-energy secondary electrons is only weakly interacting with graphene via physisorption. These observations not only are of fundamental importance to basic physical chemistry of FEBID carbon-graphene interactions but also enable the use of selective laser-assisted postdeposition ablation to effectively remove the parasitically deposited, physisorbed carbon films for improving FEBID patterning resolution.

Lattice Boltzmann simulations of multiple-droplet interaction dynamics

A lattice Boltzmann (LB) formulation, which is consistent with the phase-field model for two-phase incompressible fluid, is proposed to model the interface dynamics of droplet impingement. The interparticle force is derived by comparing the macroscopic transport equations recovered from LB equations with the governing equations of the continuous phase-field model. The inconsistency between the existing LB implementations and the phase-field model in calculating the relaxation time at the phase interface is identified and an approximation is proposed to ensure the consistency with the phase-field model. It is also shown that the commonly used equilibrium velocity boundary for the binary fluid LB scheme does not conserve momentum at the wall boundary and a modified scheme is developed to ensure the momentum conservation at the boundary. In addition, a geometric formulation of the wetting boundary condition is proposed to replace the popular surface energy formulation and results show that the geometric approach enforces the prescribed contact angle better than the surface energy formulation in both static and dynamic wetting. The proposed LB formulation is applied to simulating droplet impingement dynamics in three dimensions and results are compared to those obtained with the continuous phase-field model, the LB simulations reported in the literature, and experimental data from the literature. The results show that the proposed LB simulation approach yields not only a significant speed improvement over the phase-field model in simulating droplet impingement dynamics on a submillimeter length scale, but also better accuracy than both the phase-field model and the previously reported LB techniques when compared to experimental data. Upon validation, the proposed LB modeling methodology is applied to the study of multiple-droplet impingement and interactions in three dimensions, which demonstrates its powerful capability of simulating extremely complex interface phenomena.

Physical methods for intracellular delivery: practical aspects from laboratory use to industrial-scale processing

Effective intracellular delivery is a significant impediment to research and therapeutic applications at all processing scales. Physical delivery methods have long demonstrated the ability to deliver cargo molecules directly to the cytoplasm or nucleus, and the mechanisms underlying the most common approaches (microinjection, electroporation, and sonoporation) have been extensively investigated. In this review, we discuss established approaches, as well as emerging techniques (magnetofection, optoinjection, and combined modalities). In addition to operating principles and implementation strategies, we address applicability and limitations of various in vitro, ex vivo, and in vivo platforms. Importantly, we perform critical assessments regarding (1) treatment efficacy with diverse cell types and delivered cargo molecules, (2) suitability to different processing scales (from single cell to large populations), (3) suitability for automation/integration with existing workflows, and (4) multiplexing potential and flexibility/adaptability to enable rapid changeover between treatments of varied cell types. Existing techniques typically fall short in one or more of these criteria; however, introduction of micro-/nanotechnology concepts, as well as synergistic coupling of complementary method(s), can improve performance and applicability of a particular approach, overcoming barriers to practical implementation. For this reason, we emphasize these strategies in examining recent advances in development of delivery systems.

The roles of titanium surface micro/nanotopography and wettability on the differential response of human osteoblast lineage cells

Surface micro- and nanostructural modifications of dental and orthopedic implants have shown promising in vitro, in vivo and clinical results. Surface wettability has also been suggested to play an important role in osteoblast differentiation and osseointegration. However, the available techniques to measure surface wettability are not reliable on clinically relevant, rough surfaces. Furthermore, how the differentiation state of osteoblast lineage cells impacts their response to micro/nanostructured surfaces, and the role of wettability on this response, remain unclear. In the current study, surface wettability analyses (optical sessile drop analysis, environmental scanning electron microscopic analysis and the Wilhelmy technique) indicated hydrophobic static responses for deposited water droplets on microrough and micro/nanostructured specimens, while hydrophilic responses were observed with dynamic analyses of micro/nanostructured specimens. The maturation and local factor production of human immature osteoblast-like MG63 cells was synergistically influenced by nanostructures superimposed onto microrough titanium (Ti) surfaces. In contrast, human mesenchymal stem cells cultured on micro/nanostructured surfaces in the absence of exogenous soluble factors exhibited less robust osteoblastic differentiation and local factor production compared to cultures on unmodified microroughened Ti. Our results support previous observations using Ti6Al4V surfaces showing that recognition of surface nanostructures and subsequent cell response is dependent on the differentiation state of osteoblast lineage cells. The results also indicate that this effect may be partly modulated by surface wettability. These findings support the conclusion that the successful osseointegration of an implant depends on contributions from osteoblast lineage cells at different stages of osteoblast commitment.

A DLVO model for catalyst motion in metal-assisted chemical etching based upon controlled out-of-plane rotational etching and force-displacement measurements

Metal-assisted Chemical Etching of silicon has recently emerged as a powerful technique to fabricate 1D, 2D, and 3D nanostructures in silicon with high feature fidelity. This work demonstrates that out-of-plane rotational catalysts utilizing polymer pinning structures can be designed with excellent control over rotation angle. A plastic deformation model was developed establishing that the catalyst is driven into the silicon substrate with a minimum pressure differential across the catalyst thickness of 0.4-0.6 MPa. Force-displacement curves were gathered between an Au tip and Si or SiO(2) substrates under acidic conditions to show that Derjaguin and Landau, Verwey and Overbeek (DLVO) based forces are capable of providing restorative forces on the order of 0.2-0.3 nN with a calculated 11-18 MPa pressure differential across the catalyst. This work illustrates that out-of-plane rotational structures can be designed with controllable rotation and also suggests a new model for the driving force for catalyst motion based on DLVO theory. This process enables the facile fabrication of vertically aligned thin-film metallic structures and scalloped nanostructures in silicon for applications in 3D micro/nano-electromechanical systems, photonic devices, nanofluidics, etc.

[Results of the upper digestive tract stenting with self-expanding stents]

The work is based on the analysis of the palliative treatment of 66 patients with malignant upper digestive tract obstruction who underwent implantation of 75 self-expanding metallic stents in the period of 2003-2012 yy. Early postoperative complications developed in 10 (15.2%) cases. Procedure-related complications were observed in 8 (12.1%) patients, non-specific complications occurred in 2 (3.0%) patients. In-hospital lethality was 4.5% (3 patients). 51 patients were followed until death. Symptomatic relapse of obstruction was observed in 4 cases. Median survival was 97 days. Stenting with self-expanding metal stents was concluded to be an effective and safe method of palliation of malignant upper digestive tract stenosis.

3D spirals with controlled chirality fabricated using metal-assisted chemical etching of silicon

The ability to fabricate 3D spiraling structures using metal-assisted chemical etching (MaCE) is one of the unique advantages of MaCE over traditional etching methods. However, control over the chirality of the spiraling structures has not been established. In this work, a systematic parametric study was undertaken for MaCE of star-shaped catalysts, examining the influence of arm shape, arm length, number of arms, center core diameter, and catalyst thickness on the rotation direction. This data was used to identify a set of geometric parameters that reliably induce rotation in a predefined direction such that large arrays of 3D spiraling structures can be fabricated with the same chirality. Electroless deposition into the MaCE template was used to examine the full etch path of the catalyst and an experimental fit was established to control rotation angle by adjusting the catalyst's center core diameter. The ability to fabricate large arrays of 3D spiraling structures with predefined chirality could have important applications in photonics and optoelectronics.

Radiative properties of dense nanofluids

The radiative properties of dense nanofluids are investigated. For nanofluids, scattering and absorbing of electromagnetic waves by nanoparticles, as well as light absorption by the matrix/fluid in which the nanoparticles are suspended, should be considered. We compare five models for predicting apparent radiative properties of nanoparticulate media and evaluate their applicability. Using spectral absorption and scattering coefficients predicted by different models, we compute the apparent transmittance of a nanofluid layer, including multiple reflecting interfaces bounding the layer, and compare the model predictions with experimental results from the literature. Finally, we propose a new method to calculate the spectral radiative properties of dense nanofluids that shows quantitatively good agreement with the experimental results.

Using amphiphilic nanostructures to enable long-range ensemble coalescence and surface rejuvenation in dropwise condensation

Controlling coalescence events in a heterogeneous ensemble of condensing droplets on a surface is an outstanding fundamental challenge in surface and interfacial sciences, with a broad practical importance in applications ranging from thermal management of high-performance electronic devices to moisture management in high-humidity environments. Nature-inspired superhydrophobic surfaces have been actively explored to enhance heat and mass transfer rates by achieving favorable dynamics during dropwise condensation; however, the effectiveness of such chemically homogeneous surfaces has been limited because condensing droplets tend to form as pinned Wenzel drops rather than mobile Cassie ones. Here, we introduce an amphiphilic nanostructured surface, consisting of a hydrophilic base with hydrophobic tips, which promotes the periodic regeneration of nucleation sites for small droplets, thus rendering the surface self-rejuvenating. This unique amphiphilic nanointerface generates an arrangement of condensed Wenzel droplets that are fluidically linked by a wetted sublayer, promoting previously unobserved coalescence events where numerous droplets simultaneously merge, without direct contact. Such ensemble coalescences rapidly create fresh nucleation sites, thereby shifting the overall population toward smaller droplets and enhancing the rates of mass and heat transfer during condensation.

Interfacial transport of evaporating water confined in nanopores

A semianalytical, continuum analysis of evaporation of water confined in a cylindrical nanopore is presented, wherein the combined effect of electrostatic interaction and van der Waals forces is taken into account. The equations governing fluid flow and heat transfer between liquid and vapor phases are partially integrated analytically, to yield a set of ordinary differential equations, which are solved numerically to determine the flow characteristics and effect on the resulting shape and rate of evaporation from the liquid-vapor interface. The analysis identifies three important parameters that significantly affect the overall performance of the system, namely, the capillary radius, pore-wall temperature, and the degree of saturation of vapor phase. The extension of meniscus is found to be prominent for smaller nanoscale capillaries, in turn yielding a greater net rate of evaporation per unit pore area. The effects of temperature and ambient vapor pressure on net rate of evaporation are shown to be analogous. An increase in pore-wall temperature, which enhances saturation pressure, or a decrease in the ambient vapor pressure result in enhancing the net potential for evaporation and increasing the curvature of the interface.

Guided three-dimensional catalyst folding during metal-assisted chemical etching of silicon

In recent years metal-assisted chemical etching (MaCE) of silicon, in which etching is confined to a small region surrounding metal catalyst templates, has emerged as a promising low cost alternative to commonly used three-dimensional (3D) fabrication techniques. We report a new methodology for controllable folding of 2D metal catalyst films into 3D structures using MaCE. This method takes advantage of selective patterning of the catalyst layer into regions with mismatched characteristic dimensions, resulting in uneven etching rates along the notched boundary lines that produce hinged 2D templates for 3D folding. We explore the dynamics of the folding process of the hinged templates, demonstrating that the folding action combines rotational and translational motion of the catalyst template, which yields topologically complex 3D nanostructures with intimately integrated metal and silicon features.

Thermally induced transformations of amorphous carbon nanostructures fabricated by electron beam induced deposition

We studied the thermally induced phase transformations of electron-beam-induced deposited (EBID) amorphous carbon nanostructures by correlating the changes in its morphology with internal microstructure by using combined atomic force microscopy (AFM) and high resolution confocal Raman microscopy. These carbon deposits can be used to create heterogeneous junctions in electronic devices commonly known as carbon-metal interconnects. We compared two basic shapes of EBID deposits: dots/pillars with widths from 50 to 600 nm and heights from 50 to 500 nm and lines with variable heights from 10 to 150 nm but having a constant length of 6 μm. We observed that during thermal annealing, the nanoscale amorphous deposits go through multistage transformation including dehydration and stress-relaxation around 150 °C, dehydrogenation within 150-300 °C, followed by graphitization (>350 °C) and formation of nanocrystalline, highly densified graphitic deposits around 450 °C. The later stage of transformation occurs well below commonly observed graphitization for bulk carbon (600-800 °C). It was observed that the shape of the deposits contribute significantly to the phase transformations. We suggested that this difference is controlled by different contributions from interfacial footprints area. Moreover, the rate of graphitization was different for deposits of different shapes with the lines showing a much stronger dependence of its structure on the density than the dots.

Directed 2D-to-3D pattern transfer method for controlled fabrication of topologically complex 3D features in silicon

A process that allows control over the 3D motion of catalyst nanostructures during metal-assisted chemical etching by their local pinning prior to etching is demonstrated. The pinning material acts as a fulcrum for rotation of the catalyst structures resulting in etching of silicon features with rotational geometry.

Droplet charging regimes for ultrasonic atomization of a liquid electrolyte in an external electric field

Distinct regimes of droplet charging, determined by the dominant charge transport process, are identified for an ultrasonic droplet ejector using electrohydrodynamic computational simulations, a fundamental scale analysis, and experimental measurements. The regimes of droplet charging are determined by the relative magnitudes of the dimensionless Strouhal and electric Reynolds numbers, which are a function of the process (pressure forcing), advection, and charge relaxation time scales for charge transport. Optimal (net maximum) droplet charging has been identified to exist for conditions in which the electric Reynolds number is of the order of the inverse Strouhal number, i.e., the charge relaxation time is on the order of the pressure forcing (droplet formation) time scale. The conditions necessary for optimal droplet charging have been identified as a function of the dimensionless Debye number (i.e., liquid conductivity), external electric field (magnitude and duration), and atomization drive signal (frequency and amplitude). The specific regime of droplet charging also determines the functional relationship between droplet charge and charging electric field strength. The commonly expected linear relationship between droplet charge and external electric field strength is only found when either the inverse of the Strouhal number is less than the electric Reynolds number, i.e., the charge relaxation is slower than both the advection and external pressure forcing, or in the electrostatic limit, i.e., when charge relaxation is much faster than all other processes. The analysis provides a basic understanding of the dominant physics of droplet charging with implications to many important applications, such as electrospray mass spectrometry, ink jet printing, and drop-on-demand manufacturing.

Regime transition in electromechanical fluid atomization and implications to analyte ionization for mass spectrometric analysis

The physical processes governing the transition from purely mechanical ejection to electromechanical ejection to electrospraying are investigated through complementary scaling analysis and optical visualization. Experimental characterization and visualization are performed with the ultrasonically-driven array of micromachined ultrasonic electrospray (AMUSE) ion source to decouple the electrical and mechanical fields. A new dimensionless parameter, the Fenn number, is introduced to define a transition between the spray regimes, in terms of its dependence on the characteristic Strouhal number for the ejection process. A fundamental relationship between the Fenn and Strouhal numbers is theoretically derived and confirmed experimentally in spraying liquid electrolytes of different ionic strength subjected to a varying magnitude electric field. This relationship and the basic understanding of the charged droplet generation physics have direct implications on the optimal ionization efficiency and mass spectrometric response for different types of analytes.

Electrochemical Ionization and Analyte Charging in the Array of Micromachined UltraSonic Electrospray (AMUSE) Ion Source

Electrochemistry and ion transport in a planar array of mechanically-driven, droplet-based ion sources are investigated using an approximate time scale analysis and in-depth computational simulations. The ion source is modeled as a controlled-current electrolytic cell, in which the piezoelectric transducer electrode, which mechanically drives the charged droplet generation using ultrasonic atomization, also acts as the oxidizing/corroding anode (positive mode). The interplay between advective and diffusive ion transport of electrochemically generated ions is analyzed as a function of the transducer duty cycle and electrode location. A time scale analysis of the relative importance of advective vs. diffusive ion transport provides valuable insight into optimality, from the ionization prospective, of alternative design and operation modes of the ion source operation. A computational model based on the solution of time-averaged, quasi-steady advection-diffusion equations for electroactive species transport is used to substantiate the conclusions of the time scale analysis. The results show that electrochemical ion generation at the piezoelectric transducer electrodes located at the back-side of the ion source reservoir results in poor ionization efficiency due to insufficient time for the charged analyte to diffuse away from the electrode surface to the ejection location, especially at near 100% duty cycle operation. Reducing the duty cycle of droplet/analyte ejection increases the analyte residence time and, in turn, improves ionization efficiency, but at an expense of the reduced device throughput. For applications where this is undesirable, i.e., multiplexed and disposable device configurations, an alternative electrode location is incorporated. By moving the charging electrode to the nozzle surface, the diffusion length scale is greatly reduced, drastically improving ionization efficiency. The ionization efficiency of all operating conditions considered is expressed as a function of the dimensionless Peclet number, which defines the relative effect of advection as compared to diffusion. This analysis is general enough to elucidate an important role of electrochemistry in ionization efficiency of any arrayed ion sources, be they mechanically-driven or electrosprays, and is vital for determining optimal design and operation conditions.

Maskless and resist-free rapid prototyping of three-dimensional structures through electron beam induced deposition (EBID) of carbon in combination with metal-assisted chemical etching (MaCE) of silicon

In this work, we introduce a maskless, resist-free rapid prototyping method to fabricate three-dimensional structures using electron beam induced deposition (EBID) of amorphous carbon (aC) from a residual hydrocarbon precursor in combination with metal-assisted chemical etching (MaCE) of silicon. We demonstrate that EBID-made patterned aC coating, with thickness of even a few nanometers, acts as a negative "mask" for the etching process and is sufficient for localized termination of the MaCE of silicon. Optimal aC deposition settings and gold film thickness for fabrication of high-aspect-ratio nanoscale 3D silicon structures are determined. The speed necessary for optimal aC feature deposition is found to be comparable to the writing speed of standard Electron Beam Lithography and the MaCE etching rate is found to be comparable to standard deep reactive ion etching (DRIE) rate.

Electrohydrodynamics of charge separation in droplet-based ion sources with time-varying electrical and mechanical actuation

Charge transport and separation in mechanically-driven, droplet-based ion sources are investigated using computational analysis and supporting experiments. A first-principles model of electrohydrodynamics (EHD) and charge migration is formulated and implemented using FLUENT CFD software for jet/droplet formation. For validation, classical experiments of electrospraying from a thin capillary are simulated, specifically, the transient EHD cone-jet formation of a fluid with finite electrical conductivity, and the Taylor cone formation in a perfectly electrically-conducting fluid. The model is also used to investigate the microscopic physics of droplet charging in mechanically-driven droplet-based ion sources, such as array of micromachined ultrasonic electrospray (AMUSE). Here, AMUSE is subject to DC and AC electric fields of varying amplitude and phase, with respect to a time-varying mechanical force driving the droplet formation. For the DC-charging case, a linear relationship is demonstrated between the charge carried by each droplet and an applied electric field magnitude, in agreement with previously reported experiments. For the AC-charging case, a judiciously-chosen phase-shift in the time-varying mechanical (driving ejection) and electrical (driving charge transport) signals allows for a significantly increased amount of charge, of desired polarity, to be pumped into a droplet upon ejection. Complementary experimental measurements of electrospray electrical current and charge-per-droplet, produced by the AMUSE ion source, are performed and support theoretical predictions for both DC- and AC-charging cases. The theoretical model and simulation tools provide a versatile and general analytical framework for fundamental investigations of coupled electrohydrodynamics and charge transport. The model also allows for the exploration of different configurations and operating modes to optimize charge separation in atmospheric pressure electrohydrodynamic ion sources under static and dynamic electrical and mechanical fields.

Scanning mass spectrometry probe: a scanning probe electrospray ion source for imaging mass spectrometry of submerged interfaces and transient events in solution

The scanning mass spectrometry (SMS) probe is a new electrospray ion source. Motivated by the need for untargeted chemical imaging of dynamic events in solution, we have exploited an approach to electrospray ionization (ESI) that allows continuous sampling from a highly localized volume (approximately picoliters) in a liquid environment, softly ionizes molecules in the sample to render them amenable for mass spectrometric analysis, and sends the ions to the mass spectrometer. The key underlying concepts for our approach are (1) treating the electrospray capillary inlet as a chemical scanning probe and (2) locating the electrospray point as close as possible to the sampling point, thus providing the shortest response time possible. This approach enables chemical monitoring or imaging of submerged interfaces, providing access to details of spatial heterogeneity and temporal changes within liquid samples. It also permits direct access to liquid/ liquid interfaces for ESI-MS analysis. In this letter we report the first demonstrations of these capabilities of the SMS probe and describe some of the probe's basic characteristics.