High-aspect-ratio three-dimensional polymer and metallic microstructure microfabrication using two-photon polymerization

Creating micrometer-resolution high-aspect-ratio three-dimensional (3D) structures remain very challenging despite significant microfabrication methods developed for microelectromechanical systems (MEMS). This is especially the case when such structures are desired to be metallic to support electronic applications. Here, we present a microfabrication process that combines two-photon-polymerization (2PP) printing to create a polymeric high-aspect-ratio three-dimensional structure and electroless metal plating that selectively electroplates only the polymeric structure to create high-aspect-ratio 3D metallic structures having micrometer-resolution. To enable this, the effect of various 2PP processing parameters on SU-8 photoresist microstructures were first systematically studied. These parameters include laser power, slicing/hatching distances, and pre-/post-baking temperature. This optimization resulted in a maximum aspect ratio (height to width) of ~ 12. Following this polymeric structure printing, electroless plating using Tollens' Reagent were utilized to selectively coat silver particles only on the polymeric structure, but not on the silicon substrate. The final 3D metallic structures were evaluated in terms of their resistivity, reproducibly showing resistivity of ~ 10-6 [Ω·m]. The developed 3D metallic structure microfabrication process can be further integrated with conventional 2D lithography to achieve even more complex structures. The developed method overcomes the limitations of current MEMS fabrication processes, allowing a variety of previously impossible metallic microstructures to be created.

Manufacture of Three-Dimensional Optofluidic Spot-Size Converters in Fused Silica Using Hybrid Laser Microfabrication

We propose a hybrid laser microfabrication approach for the manufacture of three-dimensional (3D) optofluidic spot-size converters in fused silica glass by a combination of femtosecond (fs) laser microfabrication and carbon dioxide laser irradiation. Spatially shaped fs laser-assisted chemical etching was first performed to form 3D hollow microchannels in glass, which were composed of embedded straight channels, tapered channels, and vertical channels connected to the glass surface. Then, carbon dioxide laser-induced thermal reflow was carried out for the internal polishing of the whole microchannels and sealing parts of the vertical channels. Finally, 3D optofluidic spot-size converters (SSC) were formed by filling a liquid-core waveguide solution into laser-polished microchannels. With a fabricated SSC structure, the mode spot size of the optofluidic waveguide was expanded from ~8 μm to ~23 μm with a conversion efficiency of ~84.1%. Further measurement of the waveguide-to-waveguide coupling devices in the glass showed that the total insertion loss of two symmetric SSC structures through two ~50 μm-diameter coupling ports was ~6.73 dB at 1310 nm, which was only about half that of non-SSC structures with diameters of ~9 μm at the same coupling distance. The proposed approach holds great potential for developing novel 3D fluid-based photonic devices for mode conversion, optical manipulation, and lab-on-a-chip sensing.

Micromolding of Thermoplastic Polymers for Direct Fabrication of Discrete, Multilayered Microparticles

Soft lithography provides a convenient and effective method for the fabrication of microdevices with uniform size and shape. However, formation of an embossed, connective film as opposed to discrete features has been an enduring shortcoming associated with soft lithography. Removing this residual layer requires additional postprocessing steps that are often incompatible with organic materials. This limits adaptation and widespread realization of soft lithography for broader applications particularly in drug discovery and drug delivery fields. A novel and versatile approach is demonstrated that enables fabrication of discrete, multilayered, fillable, and harvestable microparticles directly from any thermoplastic polymer, even at very high molecular weights. The approach, isolated microparticle replication via surface-segregating polymer blend mold, utilizes a random copolymer additive, designed with a highly fluorinated segment that, when blended with the mold's matrix, spontaneously orients to the surface conferring an extremely low surface energy and nonwetting properties to the template. The extremely nonwetting properties of the mold are further utilized to load soluble biologics directly into the built-in microwells in a rapid and efficient manner using an innovative screen-printing approach. It is believed that this approach holds promise for fabrication of large-array, 3D, complex microstructures, and is a significant step toward clinical translation of microfabrication technologies.

Live single cell imaging assays in glass microwells produced by laser-induced deep etching

Miniaturization of cell culture substrates enables controlled analysis of living cells in confined micro-scale environments. This is particularly suitable for imaging individual cells over time, as they can be monitored without escaping the imaging field-of-view (FoV). Glass materials are ideal for most microscopy applications. However, with current methods used in life sciences, glass microfabrication is limited in terms of either freedom of design, quality, or throughput. In this work, we introduce laser-induced deep etching (LIDE) as a method for producing glass microwell arrays for live single cell imaging assays. We demonstrate novel microwell arrays with deep, high-aspect ratio wells that have rounded, dimpled or flat bottom profiles in either single-layer or double-layer glass chips. The microwells are evaluated for microscopy-based analysis of long-term cell culture, clonal expansion, laterally organized cell seeding, subcellular mechanics during migration and immune cell cytotoxicity assays of both adherent and suspension cells. It is shown that all types of microwells can support viable cell cultures and imaging with single cell resolution, and we highlight specific benefits of each microwell design for different applications. We believe that high-quality glass microwell arrays enabled by LIDE provide a great option for high-content and high-resolution imaging-based live cell assays with a broad range of potential applications within life sciences.

Fabrication and use of silicon hollow-needle arrays to achieve tissue nanotransfection in mouse tissue in vivo

Tissue nanotransfection (TNT) is an electromotive gene transfer technology that was developed to achieve tissue reprogramming in vivo. This protocol describes how to fabricate the required hardware, commonly referred to as a TNT chip, and use it for in vivo TNT. Silicon hollow-needle arrays for TNT applications are fabricated in a standardized and reproducible way. In <1 s, these silicon hollow-needle arrays can be used to deliver plasmids to a predetermined specific depth in murine skin in response to pulsed nanoporation. Tissue nanotransfection eliminates the need to use viral vectors, minimizing the risk of genomic integration or cell transformation. The TNT chip fabrication process typically takes 5-6 d, and in vivo TNT takes 30 min. This protocol does not require specific expertise beyond a clean room equipped for basic nanofabrication processes.

Stimuli-Responsive Lysozyme Nanocapsule Engineered Microfiltration Membranes with a Dual-Function of Anti-Adhesion and Antibacteria for Biofouling Mitigation

Biofouling remains as a persistent problem impeding the applications of membranes for water and wastewater treatment. Green anti-biofouling of membranes made of natural and environmentally friendly materials and methods is a promising strategy to tackle this problem. Herein, we have developed a functionalized PVDF membrane with stimuli-responsive lysozyme nanocapsules (NCP). These nanocapsules can responsively release lysozyme according to environmental stimuli (pH and redox) induced by bacteria. Results showed that (i) the surface of the functionalized membrane with NCP had enhanced hydrophilicity, reduced roughness, and negative charge, (ii) a remarkable reduction of adsorption of proteins, polysaccharides, and bacteria was achieved by the functionalized membrane, and (iii) the colony forming unit (CFU) of bacteria on a membrane surface was reduced more than 80% within 24 h of contact. In addition, the NCP membrane showed excellent anti-biofouling activity regarding the bacterial viability being 12.5 and 8.3% on the membrane after filtration with 10⁸ CFU mL^-1 Escherichia coli and Staphylococcus aureus solution as feed, respectively. The coating layer and assembled nanocapsules endowed the membrane with improved lysozyme stability, anti-adhesion performance, and antibacterial activity. Stimuli-responsive lysozyme nanocapsule engineered microfiltration membranes show great potential for anti-biofouling in future practical application.

Enzymatic/Magnetic Hybrid Micromotors for Synergistic Anticancer Therapy

Micro/nanomotors (MNMs), which propel by transforming various forms of energy into kinetic energy, have emerged as promising therapeutic nanosystems in biomedical applications. However, most MNMs used for anticancer treatment are only powered by one engine or provide a single therapeutic strategy. Although double-engined micromotors for synergistic anticancer therapy can achieve more flexible movement and efficient treatment efficacy, their design remains challenging. In this study, we used a facile preparation method to develop enzymatic/magnetic micromotors for synergetic cancer treatment via chemotherapy and starvation therapy (ST), and the size of micromotors can be easily regulated during the synthetic process. The enzymatic reaction of glucose oxidase, which served as the chemical engine, led to self-propulsion using glucose as a fuel and ST via a reduction in the energy available to cancer cells. Moreover, the incorporation of Fe₃O₄ nanoparticles as a magnetic engine enhanced the kinetic power and provided control over the direction of movement. Inherent pH-responsive drug release behavior was observed owing to the acidic decomposition of drug carriers in the intracellular microenvironment of cancer cells. This system displayed enhanced anticancer efficacy owing to the synergetic therapeutic strategies and increased cellular uptake in a targeted area because of the improved motion behavior provided by the double engines. Therefore, the demonstrated micromotors are promising candidates for anticancer biomedical microsystems.

Bone Material Strength Index as Measured by Impact Microindentation is Low in Patients with Primary Hyperparathyroidism

CONTEXT

In primary hyperparathyroidism (PHPT) bone mineral density (BMD) is typically decreased in cortical bone and relatively preserved in trabecular bone. An increased fracture rate is observed however not only at peripheral sites but also at the spine, and fractures occur at higher BMD values than expected. We hypothesized that components of bone quality other than BMD are affected in PHPT as well.

OBJECTIVE

To evaluate bone material properties using impact microindentation (IMI) in PHPT patients.

METHODS

In this cross-sectional study, the Bone Material Strength index (BMSi) was measured by IMI at the midshaft of the tibia in 37 patients with PHPT (28 women), 11 of whom had prevalent fragility fractures, and 37 euparathyroid controls (28 women) matched for age, gender, and fragility fracture status.

RESULTS

Mean age of PHPT patients and controls was 61.8 ± 13.3 and 61.0 ± 11.8 years, respectively, P = .77. Calcium and PTH levels were significantly higher in PHPT patients but BMD at the lumbar spine (0.92 ± 0.15 vs 0.89 ± 0.11, P = .37) and the femoral neck (0.70 ± 0.11 vs 0.67 ± 0.07, P = .15) were comparable between groups. BMSi however was significantly lower in PHPT patients than in controls (78.2 ± 5.7 vs 82.8 ± 4.5, P < .001). In addition, BMSi was significantly lower in 11 PHPT patients with fragility fractures than in the 26 PHPT patients without fragility fractures (74.7 ± 6.0 vs 79.6 ± 5.0, P = .015).

CONCLUSION

Our data indicate that bone material properties are altered in PHPT patients and most affected in those with prevalent fractures. IMI might be a valuable additional tool in the evaluation of bone fragility in patients with PHPT.

Rapid fabrication of hydrogel micropatterns by projection stereolithography for studying self-organized developmental patterning

Self-organized patterning of mammalian embryonic stem cells on micropatterned surfaces has previously been established as an in vitro platform for early mammalian developmental studies, complimentary to in vivo studies. Traditional micropatterning methods, such as micro-contact printing (μCP), involve relatively complicated fabrication procedures, which restricts widespread adoption by biologists. Here, we demonstrate a rapid method of micropatterning by printing hydrogel micro-features onto a glass-bottomed culture vessel. The micro-features are printed using a projection stereolithography bioprinter yielding hydrogel structures that geometrically restrict the attachment of cells or proteins. Compared to traditional and physical photomasks, a digitally tunable virtual photomask is used in the projector to generate blue light patterns that enable rapid iteration with minimal cost and effort. We show that a protocol that makes use of this method together with LN521 coating, an extracellular matrix coating, creates a surface suitable for human embryonic stem cell (hESC) attachment and growth with minimal non-specific adhesion. We further demonstrate that self-patterning of hESCs following previously published gastrulation and ectodermal induction protocols achieves results comparable with those obtained with commercially available plates.

Growing Living Composites with Ordered Microstructures and Exceptional Mechanical Properties

Living creatures are continuous sources of inspiration for designing synthetic materials. However, living creatures are typically different from synthetic materials because the former consist of living cells to support their growth and regeneration. Although natural systems can grow materials with sophisticated microstructures, how to harness living cells to grow materials with predesigned microstructures in engineering systems remains largely elusive. Here, an attempt to exploit living bacteria and 3D-printed materials to grow bionic mineralized composites with ordered microstructures is reported. The bionic composites exhibit outstanding specific strength and fracture toughness, which are comparable to natural composites, and exceptional energy absorption capability superior to both natural and artificial counterparts. This report opens the door for 3D-architectured hybrid synthetic-living materials with living ordered microstructures and exceptional properties.

Self-assembled microcage fabrication for manipulating and selectively capturing microparticles and cells

Single-cell-scale selective manipulation and targeted capture play a vital role in cell behavior analysis. However, selective microcapture has primarily been performed in specific circumstances to maintain the trapping state, making the subsequent in situ characterization and analysis of specific particles or cells difficult and imprecise. Herein, we propose a novel method that combines femtosecond laser two-photon polymerization (TPP) micromachining technology with the operation of optical tweezers (OTs) to achieve selective and targeted capture of single particles and cells. Diverse ordered microcages with different shapes and dimensions were self-assembled by micropillars fabricated via TPP. The micropillars with high aspect ratios were processed by single exposure, and the parameters of the micropillar arrays were investigated to optimize the capillary-force-driven self-assembly process of the anisotropic microcages. Finally, single microparticles and cells were selectively transported to the desired microcages by manipulating the flexibly of the OTs in a few minutes. The captured microparticles and cells were kept trapped without additional forces.

Additive Manufacturing Using Melt Extruded Thermoplastics for Tissue Engineering

Melt extrusion of thermoplastic materials is an important technique for fabricating tissue engineering scaffolds by additive manufacturing methods. Scaffold manufacturing is commonly achieved by one of the following extrusion-based techniques: fused deposition modelling (FDM), 3D-fiber deposition (3DF), and bioextrusion. FDM needs the input material to be strictly in the form of a filament, whereas 3DF and bioextrusion can be used to process input material in several forms, such as pellets or powder. This chapter outlines a common workflow for all these methods, going from the material to a scaffold, while highlighting the special requirements of particular methods. A few ways of characterizing the scaffolds are also briefly described.

Low-Voltage Continuous Electrospinning: A Versatile Protocol for Patterning Nano- and Micro-Scaled Fibers for Cell Interface

Nano- and micro-scaled fibers have been incorporated in a number of applications in biofabrication and tissue cultures, providing a cell interfacing structure with extracellular matrix-mimicking topography and adhesion sites, and further supporting localized drug release. Here, we describe the low-voltage electrospinning patterning (LEP) protocol, which allows direct and continuous patterning of sub-micron fibers in a controlled fashion. The processable polymers range from protein (e.g., gelatin) to thermoplastic (e.g., polystyrene) polymers, with flexible selections of collecting substrates. The operation voltage for fiber fabrication can be as low as 50 V, which brings the benefits of reducing costs and mild-processing.

Surface Tension-Assisted Additive Manufacturing of Tubular, Multicomponent Biomaterials

The fabrication of functional biomaterials for organ replacement and tissue repair remains a major goal of biomedical engineering. Advances in additive manufacturing (AM) technologies and computer-aided design (CAD) are advancing the tools available for the production of these devices. Ideally, these constructs should be matched to the geometry and mechanical properties of the tissue at the needed implant site. To generate geometrically defined and structurally supported multicomponent and cell-laden biomaterials, we have developed a method to integrate hydrogels with 3D-printed lattice scaffolds leveraging surface tension-assisted AM.

Continuous High-Throughput Fabrication of Architected Micromaterials via In-Air Photopolymerization

Recent advances in optical coding, drug delivery, diagnostics, tissue engineering, shear-induced gelation, and functionally engineered rheology crucially depend on microparticles and microfibers with tunable shape, size, and composition. However, scalable manufacturing of the required complex micromaterials remains a long-standing challenge. Here in-air polymerization of liquid jets is demonstrated as a novel platform to produce microparticles and microfibers with tunable size, shape, and composition at high throughput (>100 mL h^-1 per nozzle). The polymerization kinetics is quantitatively investigated and modeled as a function of the ink composition, the UV light intensity, and the velocity of the liquid jet, enabling engineering of complex micromaterials in jetting regimes. The size, morphology, and local chemistry of micromaterials are independently controlled, as highlighted by producing micromaterials using 5 different photopolymers as well as multi-material composites. Simultaneous optimization of these control parameters yields rapid fabrication of stimuli-responsive Janus fibers that function as soft actuators. Finally, in-air photopolymerization enables control over the curvature of printed droplets, as highlighted by high-throughput printing of microlenses with tunable focal distance. The combination of rapid processing and tunability in composition and architecture opens a new route toward applications of tailored micromaterials in soft matter, medicine, pharmacy, and optics.

Reduced Graphene Oxide-Encapsulated Microfiber Patterns Enable Controllable Formation of Neuronal-Like Networks

Scaffold-guided formation of neuronal-like networks, especially under electrical stimulation, can be an appealing avenue toward functional restoration of injured nervous systems. Here, 3D conductive scaffolds are fabricated based on printed microfiber constructs using near-field electrostatic printing (NFEP) and graphene oxide (GO) coating. Various microfiber patterns are obtained from poly(l-lactic acid-co-caprolactone) (PLCL) using NFEP and complexity is achieved via modulating the fiber overlay angles (45°, 60°, 75°, 90°), fiber diameters (15 to 148 µm), and fiber spatial organization (spider web and tubular structure). Upon coating GO onto PLCL microfibers via a layer-by-layer (L-b-L) assembly technique and in situ reduction into reduced GO (rGO), the obtained conductive scaffolds, with 25-50 layers of rGO, demonstrate superior conductivity (≈0.95 S cm-1 ) and capability of inducing neuronal-like network formation along the conductive microfibers under electrical stimulation (100-150 mV cm-1 ). Both electric field (0-150 mV cm-1 ) and microfiber diameter (17-150 µm) affect neurite outgrowth (PC-12 cells and primary mouse hippocampal neurons) and the formation of orientated neuronal-like networks. With further demonstration of such guidance to neuronal cells, these conductive scaffolds may see versatile applications in nerve regeneration and neural engineering.

Preparation and characterization of a novel polylactic acid/hydroxyapatite composite scaffold with biomimetic micro-nanofibrous porous structure

Combining synthetic polymer scaffolds with inorganic bioactive factors is widely used to promote the bioactivity and bone conductivity of bone tissue. However, except for the chemical composition of scaffold, the biomimetic structure also plays an important role in its application. In this study, we report the fabrication of polylactic acid/hydroxyapatite (PLA/HA) composite nanofibrous scaffolds via phase separation method to mimic the native extracellular matrix (ECM). The SEM analysis showed that the addition of HA dramatically impacted the morphology of the PLA matrix, which changed from 3D nanofibrous network structure to a disorderly micro-nanofibrous porous structure. At the same time, HA particles could be evenly dispersed at the end of the fiber. The FTIR and XRD demonstrated that there was not any chemical interaction between PLA and HA. Thermal analyses showed that HA could decrease the crystallization of PLA, but improve the thermal decomposition temperature of the composite scaffold. Moreover, water contact angle analysis of the PLA/HA composite scaffold demonstrated that the hydrophilicity increased with the addition of HA. Furthermore, apatite-formation ability tests confirmed that HA could not only more and faster induced the deposition of weak hydroxyapatite but also induced specific morphology of HA.

Microfabrication of a biomimetic arcade-like electrospun scaffold for cartilage tissue engineering applications

In recent years, the engineering of biomimetic cellular microenvironments has emerged as a top priority for regenerative medicine, being the in vitro recreation of the arcade-like cartilaginous tissue one of the most critical challenges due to the notorious absence of cost- and time-efficient microfabrication techniques capable of building 3D fibrous scaffolds with precise anisotropic properties. Taking this into account, we suggest a feasible and accurate methodology that uses a sequential adaptation of an electrospinning-electrospraying set up to construct a hierarchical system comprising both polycaprolactone (PCL) fibres and polyethylene glycol sacrificial microparticles. After porogen leaching, the bi-layered PCL scaffold was capable of presenting not only a depth-dependent fibre orientation similar to natural cartilage, but also mechanical features and porosity proficient to encourage an enhanced cell response. In fact, cell viability studies confirmed the biocompatibility of the scaffold and its ability to guarantee suitable cell adhesion, proliferation and migration throughout the 3D anisotropic fibrous network during 21 days of culture. Additionally, likewise the hierarchical relationship between chondrocytes and their extracellular matrix, the reported PCL scaffold was able to induce depth-dependent cell-material interactions responsible for promoting a spatial modulation of the morphology, alignment and density of the cells in vitro.

Shaping Giant Membrane Vesicles in 3D-Printed Protein Hydrogel Cages

Giant unilamellar phospholipid vesicles are attractive starting points for constructing minimal living cells from the bottom-up. Their membranes are compatible with many physiologically functional modules and act as selective barriers, while retaining a high morphological flexibility. However, their spherical shape renders them rather inappropriate to study phenomena that are based on distinct cell shape and polarity, such as cell division. Here, a microscale device based on 3D printed protein hydrogel is introduced to induce pH-stimulated reversible shape changes in trapped vesicles without compromising their free-standing membranes. Deformations of spheres to at least twice their aspect ratio, but also toward unusual quadratic or triangular shapes can be accomplished. Mechanical force induced by the cages to phase-separated membrane vesicles can lead to spontaneous shape deformations, from the recurrent formation of dumbbells with curved necks between domains to full budding of membrane domains as separate vesicles. Moreover, shape-tunable vesicles are particularly desirable when reconstituting geometry-sensitive protein networks, such as reaction-diffusion systems. In particular, vesicle shape changes allow to switch between different modes of self-organized protein oscillations within, and thus, to influence reaction networks directly by external mechanical cues.

Flow analysis on microcasting with degassed polydimethylsiloxane micro-channels for cell patterning with cross-linked albumin

Patterned cell culturing is one of the most useful techniques for understanding the interaction between geometric conditions surrounding cells and their behaviors. The authors previously proposed a simple method for cell patterning with an agarose gel microstructure fabricated by microcasting with a degassed polydimethylsiloxane (PDMS) mold. Although the vacuum pressure produced from the degassed PDMS can drive a highly viscous agarose solution, the influence of solution viscosity on the casting process is unknown. This study investigated the influences of micro-channel dimensions or solution viscosity on the flow of the solution in a micro-channel of a PDMS mold by both experiments and numerical simulation. It was found experimentally that the degassed PDMS mold was able to drive a solution with a viscosity under 575 mPa·s. A simulation model was developed which can well estimate the flow rate in various dimensions of micro-channels. Cross-linked albumin has low viscosity (1 mPa·s) in aqueous solution and can undergo a one-way dehydration process from solution to solid that produces cellular repellency after dehydration. A microstructure of cross-linked albumin was fabricated on a cell culture dish by the microcasting method. After cells were seeded and cultivated on the cell culture dish with the microstructure for 7 days, the cellular pattern of mouse skeletal myoblast cell line C2C12 was observed. The microcasting with cross-linked albumin solution enables preparation of patterned cell culture systems more quickly in comparison with the previous agarose gel casting, which requires a gelation process before the dehydration process.

Fabrication of Zero Mode Waveguides for High Concentration Single Molecule Microscopy

In single molecule fluorescence enzymology, background fluorescence from labeled substrates in solution often limits fluorophore concentration to pico- to nanomolar ranges, several orders of magnitude less than many physiological ligand concentrations. Optical nanostructures called zero mode waveguides (ZMWs), which are 100-200 nm in diameter apertures fabricated in a thin conducting metal such as aluminum or gold, allow imaging of individual molecules at micromolar concentrations of fluorophores by confining visible light excitation to zeptoliter effective volumes. However, the need for expensive and specialized nanofabrication equipment has precluded the widespread use of ZMWs. Typically, nanostructures such as ZMWs are obtained by direct writing using electron beam lithography, which is sequential and slow. Here, colloidal, or nanosphere, lithography is used as an alternative strategy to create nanometer-scale masks for waveguide fabrication. This report describes the approach in detail, with practical considerations for each phase. The method allows thousands of aluminum or gold ZMWs to be made in parallel, with final waveguide diameters and depths of 100-200 nm. Only common lab equipment and a thermal evaporator for metal deposition are required. By making ZMWs more accessible to the biochemical community, this method can facilitate the study of molecular processes at cellular concentrations and rates.

The Influence of Powder Milling on Properties of SPS Compacted FeAl

The Fe-28 at.% Al alloy was studied in this article. The aim was to describe the influence of gas atomized powder pre-milling before SPS (Spark Plasma Sintering) sintering on the structure and properties of the bulk materials. The initial powder was milled for 0.5, 1, and 8 h. It was proven that 1 h milling leads to the change in size and morphology of the particles, B2→A2 phase transformation, and to the contamination with the material from a milling vessel. Powder materials were compacted by the SPS process at 900, 1000, and 1100 °C. The differences between the bulk materials were tested by LM, SEM, and TEM microscopy, XRD, and neutron diffraction methods. It was proven that, although the structures of initial powder (B2) and milled powder (A2) were different, both provide after-sintering material with the same structure (D0₃) with similar structural parameters. Higher hardness and improved ductility of the material sintered from the milled powder are likely caused by the change in chemical composition during the milling process.

WAT-on-a-chip integrating human mature white adipocytes for mechanistic research and pharmaceutical applications

Obesity and its numerous adverse health consequences have taken on global, pandemic proportions. White adipose tissue (WAT) - a key contributor in many metabolic diseases - contributes about one fourth of a healthy human's body mass. Despite its significance, many WAT-related pathophysiogical mechanisms in humans are still not understood, largely due to the reliance on non-human animal models. In recent years, Organ-on-a-chip (OoC) platforms have developed into promising alternatives for animal models; these systems integrate engineered human tissues into physiological microenvironment supplied by a vasculature-like microfluidic perfusion. Here, we report the development of a novel OoC that integrates functional mature human white adipocytes. The WAT-on-a-chip is a multilayer device that features tissue chambers tailored specifically for the maintenance of 3D tissues based on human primary adipocytes, with supporting nourishment provided through perfused media channels. The platform's capability to maintain long-term viability and functionality of white adipocytes was confirmed by real-time monitoring of fatty acid uptake, by quantification of metabolite release into the effluent media as well as by an intact responsiveness to a therapeutic compound. The novel system provides a promising tool for wide-ranging applications in mechanistic research of WAT-related biology, in studying of pathophysiological mechanisms in obesity and diabetes, and in R&D of pharmaceutical industry.

Light-Addressable Electrodes for Dynamic and Flexible Addressing of Biological Systems and Electrochemical Reactions

In this review article, we are going to present an overview on possible applications of light-addressable electrodes (LAE) as actuator/manipulation devices besides classical electrode structures. For LAEs, the electrode material consists of a semiconductor. Illumination with a light source with the appropiate wavelength leads to the generation of electron-hole pairs which can be utilized for further photoelectrochemical reaction. Due to recent progress in light-projection technologies, highly dynamic and flexible illumination patterns can be generated, opening new possibilities for light-addressable electrodes. A short introduction on semiconductor–electrolyte interfaces with light stimulation is given together with electrode-design approaches. Towards applications, the stimulation of cells with different electrode materials and fabrication designs is explained, followed by analyte-manipulation strategies and spatially resolved photoelectrochemical deposition of different material types.

Added Value of Impact Microindentation in the Evaluation of Bone Fragility: A Systematic Review of the Literature

The current gold standard for the diagnosis of osteoporosis and the prediction of fracture risk is the measurement of bone mineral density (BMD) using dual energy x-ray absorptiometry (DXA). A low BMD is clearly associated with increased fracture risk, but BMD is not the only determinant of bone strength, particularly in secondary osteoporosis and metabolic bone disorders in which components other than BMD are affected and DXA often underestimates true fracture risk. Material properties of bone which significantly contribute to bone strength have become evaluable in vivo with the impact microindentation (IMI) technique using the OsteoProbe® device. The question arises whether this new tool is of added value in the evaluation of bone fragility. To this effect, we conducted a systematic review of all clinical studies using IMI in vivo in humans also addressing practical aspects of the technique and differences in study design, which may impact outcome. Search data generated 38 studies showing that IMI can identify patients with primary osteoporosis and fractures, patients with secondary osteoporosis due to various underlying systemic disorders, and scarce longitudinal data also show that this tool can detect changes in bone material strength index (BMSi), following bone-modifying therapy including use of corticosteroids. However, this main outcome parameter was not always concordant between studies. This systematic review also identified a number of factors that impact on BMSi outcome. These include subject- and disease-related factors such as the relationship between BMSi and age, geographical region and the presence of fractures, and technique- and operator-related factors. Taken together, findings from this systematic review confirm the added value of IMI for the evaluation and follow-up of elements of bone fragility, particularly in secondary osteoporosis. Notwithstanding, the high variability of BMSi outcome between studies calls for age-dependent reference values, and for the harmonization of study protocols. Prospective multicenter trials using standard operating procedures are required to establish the value of IMI in the prediction of future fracture risk, before this technique is introduced in routine clinical practice.

Non-transdermal microneedles for advanced drug delivery

Microneedles (MNs) have been used to deliver drugs for over two decades. These platforms have been proven to increase transdermal drug delivery efficiency dramatically by penetrating restrictive tissue barriers in a minimally invasive manner. While much of the early development of MNs focused on transdermal drug delivery, this technology can be applied to a variety of other non-transdermal biomedical applications. Several variations, such as multi-layer or hollow MNs, have been developed to cater to the needs of specific applications. The heterogeneity in the design of MNs has demanded similar variety in their fabrication methods; the most common methods include micromolding and drawing lithography. Numerous materials have been explored for MN fabrication which range from biocompatible ceramics and metals to natural and synthetic biodegradable polymers. Recent advances in MN engineering have diversified MNs to include unique shapes, materials, and mechanical properties that can be tailored for organ-specific applications. In this review, we discuss the design and creation of modern MNs that aim to surpass the biological barriers of non-transdermal drug delivery in ocular, vascular, oral, and mucosal tissue.

A microfabricated, 3D-sharpened silicon shuttle for insertion of flexible electrode arrays through dura mater into brain

OBJECTIVE

Electrode arrays for chronic implantation in the brain are a critical technology in both neuroscience and medicine. Recently, flexible, thin-film polymer electrode arrays have shown promise in facilitating stable, single-unit recordings spanning months in rats. While array flexibility enhances integration with neural tissue, it also requires removal of the dura mater, the tough membrane surrounding the brain, and temporary bracing to penetrate the brain parenchyma. Durotomy increases brain swelling, vascular damage, and surgical time. Insertion using a bracing shuttle results in additional vascular damage and brain compression, which increase with device diameter; while a higher-diameter shuttle will have a higher critical load and more likely penetrate dura, it will damage more brain parenchyma and vasculature. One way to penetrate the intact dura and limit tissue compression without increasing shuttle diameter is to reduce the force required for insertion by sharpening the shuttle tip.

APPROACH

We describe a novel design and fabrication process to create silicon insertion shuttles that are sharp in three dimensions and can penetrate rat dura, for faster, easier, and less damaging implantation of polymer arrays. Sharpened profiles are obtained by reflowing patterned photoresist, then transferring its sloped profile to silicon with dry etches.

MAIN RESULTS

We demonstrate that sharpened shuttles can reliably implant polymer probes through dura to yield high quality single unit and local field potential recordings for at least 95 days. On insertion directly through dura, tissue compression is minimal.

SIGNIFICANCE

This is the first demonstration of a rat dural-penetrating array for chronic recording. This device obviates the need for a durotomy, reducing surgical time and risk of damage to the blood-brain barrier. This is an improvement to state-of-the-art flexible polymer electrode arrays that facilitates their implantation, particularly in multi-site recording experiments. This sharpening process can also be integrated into silicon electrode array fabrication.

Fabrication Of Gold Nanoparticles In Absence Of Surfactant As In Vitro Carrier Of Plasmid DNA

PURPOSE

This work aimed to synthesize surfactant-free AuNPs for targeted delivery of plasmid DNA encoded p53 gene and to avoid conventional production method of Gold nanoparticles (AuNPs) which may adversely affect the final shape, diversity, and size due to accumulation of the formulated surfactant - gold complex to the surface.

METHODS

The AuNPs were fabricated using seeded-growth method with L-Cystine methyl ester hydrochloride as capping agent, then loaded with plasmid DNA encoded p53 gene. The resultant AuNPs and AuNPs-p53 complex were evaluated for physical characteristics and morphology. Confirmation of complex formation was performed using gel electrophoresis. Furthermore, the efficient delivery and cytotoxicity behavior of the encoded gene were examined on both healthy lung cells (WI38) and cancerous lung cells (A549).

RESULTS

L-cysteine methyl ester hydrochloride AuNPs showed acceptable physical characteristics (30 nm, +36.9 mv, and spherical morphology). P53 attachment to AuNPs was confirmed by gel electrophoresis. The RT-PCR proved the overexpression of p53 by the fabricated AuNPs-p53 complex. The high percentage of cell viability in normal lung cell line (WI 38) proved the safety of L-cysteine methyl ester functionalized AuNPs. Additionally, the apoptotic effect due to expression of p53 gene loaded on AuNPs was only prominent in lung cancer cell line (A549), revealing selectivity and targeting efficiency of anticancer AuNPs-p53 complex.

CONCLUSION

AuNPs can be considered as a potential delivery system for effective transfection of plasmid DNA which can be used for successful treatment of cancer.

Fabrication and characterisation of super-paramagnetic responsive PLGA-gelatine-magnetite scaffolds with the unidirectional porous structure: a physicochemical, mechanical, and in vitro evaluation

Architecture and composition of Scaffolds are influential factors in the regeneration of defects. Herein, synthesised iron oxide (magnetite) nanoparticles (MNPs) by co-precipitation technique were evenly distributed in polylactic-co-glycolic acid (PLGA)-gelatine Scaffolds. Hybrid structures were fabricated by freeze-casting method to the creation of a matrix with tunable pores. The synthesised MNPs were characterised by transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction spectroscopy, and vibrating sample magnetometer analysis. Scanning electron microscopy micrographs of porous Scaffolds confirmed the formation of unidirectional microstructure, so that pore size measurement indicated the orientation of pores in the direction of solvent solidification. The addition of MNPs to the PLGA-gelatine Scaffolds had no particular effect on the morphology of the pores, but reduced slightly pore size distribution. The MNPs contained constructs demonstrated increased mechanical strength, but a reduced absorption capacity and biodegradation ratio. Stability of the MNPs and lack of iron release was the point of strength in this investigation and were determined by atomic absorption spectroscopy. The evolution of rat bone marrow mesenchymal stem cells performance on the hybrid structure under a static magnetic field indicated the potential of super-paramagnetic constructs for further pre-clinical and clinical studies in the field of neural regeneration.

Controllable Fabrication of Inhomogeneous Microcapsules for Triggered Release by Osmotic Pressure

Inhomogeneous microcapsules that can encapsulate various cargo for controlled release triggered by osmotic shock are designed and reported. The microcapsules are fabricated using a microfluidic approach and the inhomogeneity of shell thickness in the microcapsules can be controlled by tuning the flow rate ratio of the middle phase to the inner phase. This study demonstrates the swelling of these inhomogeneous microcapsules begins at the thinnest part of shell and eventually leads to rupture at the weak spot with a low osmotic pressure. Systematic studies indicate the rupture fraction of these microcapsules increases with increasing inhomogeneity, while the rupture osmotic pressure decreases linearly with increasing inhomogeneity. The inhomogeneous microcapsules are demonstrated to be impermeable to small probe molecules, which enables long-term storage. Thus, these microcapsules can be used for long-term storage of enzymes, which can be controllably released through osmotic shock without impairing their biological activity. The study provides a new approach to design effective carriers to encapsulate biomolecules and release them on-demand upon applying osmotic shock.

Deepening Inside the Pictorial Layers of Etruscan Sarcophagus of Hasti Afunei: An Innovative Micro-Sampling Technique for Raman/SERS Analyses

The Hasti Afunei sarcophagus is a large Etruscan urn, made up of two chalky alabaster monoliths. Dated from the last quarter of the third century BC, it was found in 1826 in the small town of Chiusi (Tuscany- Il Colle place) by a landowner, Pietro Bonci Casuccini, who made it part of his private collection. The noble owner’s collection was sold in 1865 to the Royal Museum of Palermo (today under the name of Antonino Salinas Regional Archaeological Museum), where it is still displayed. The sarcophagus is characterized by a complex iconography that is meticulously illustrated through an excellent sculptural technique, despite having subjected to anthropic degradation and numerous restorative actions during the last century. During the restoration campaign carried out between 2016 and 2017, a targeted diagnostic campaign was carried out to identify the constituent materials of the artefact, the pigments employed and the executive technique, in order to get an overall picture of conservation status and conservative criticalities. In particular, this last intervention has allowed the use of the innovative micro-sampling technique, patented by the Cultural Heritage research group of Sapienza, in order to identify the employee of lake pigments through SERS analyses. Together with this analysis, Raman and NMR technique have completed the information requested by restorers, for what concerns the wax employed as protective layers, and allowed to rebuild the conservation history of the sarcophagus. In fact, together with the identification of red ocher and yellow ocher, carbon black, Egyptian blue and madder lake, pigments compatible with the historical period of the work, modern pigments (probably green Paris, chrome orange, barium yellow, blue phtalocyanine) have been recognized, attributable with not documented intervention during the eighteenth and twentieth centuries.

Micropatterned nanolayers immobilized with nerve growth factor for neurite formation of PC12 cells

BACKGROUND

Nerve regeneration is important for the treatment of degenerative diseases and neurons injured by accidents. Nerve growth factor (NGF) has been previously conjugated to materials for promotion of neurogenesis.

MATERIALS AND METHODS

Photoreactive gelatin was prepared by chemical coupling of gelatin with azidobenzoic acid (P-gel), and then NGF was immobilized on substrates in the presence or absence of micropatterned photomasks. UV irradiation induced crosslinking reactions of P-gel with itself, NGF, and the plate for immobilization.

RESULTS

By adjustment of the P-gel concentration, the nanometer-order height of micropatterns was controlled. NGF was quantitatively immobilized with increasing amounts of P-gel. Immobilized NGF induced neurite outgrowth of PC12 cells, a cell line derived from a pheochromocytoma of the rat adrenal medulla, at the same level as soluble NGF. The immobilized NGF showed higher thermal stability than the soluble NGF and was repeatedly used without loss of biological activity. The 3D structure (height of the formed micropattern) regulated the behavior of neurite guidance. As a result, the orientation of neurites was regulated by the stripe pattern width.

CONCLUSION

The micropattern-immobilized NGF nanolayer biochemically and topologically regulated neurite formation.

Fabrication of Microarrays for the Analysis of Serological Antibody Isotypes against Food Antigens

Food intolerance is delayed adverse food reactions which follow consumption of specific foods. The underlying mechanisms are not well understood, but food intolerance is often considered as a type 2 hypersensitivity reaction mediated by immunoglobulin G (IgG) antibody. To understand the causes of food intolerance, it is important to investigate sensitization patterns of food-specific IgGs (sIgG) in relation to dietary patterns and physical conditions. Conventional approaches to measure serological IgGs often require large volumes of serum, thus are not suitable for highly multiplexed assays. To overcome this impracticality, we developed a highly sensitive method to screen the sIgGs and other antibody isotypes against 66 antigens with minimal amount of serums. We prepared a microarray by immobilizing food antigens on activated glass slides. Human sera and their dietary information were obtained from 30 subjects. Aliquots (200 nl) of sera were analyzed against 66 food antigens in parallel. sIgG levels were determined and analyzed in relation to subjects' dietary patterns. The levels of antibody isotypes were also examined to understand the relationship between allergy and food intolerance. The developed microarray showed exceptional performances in antibody screening and demonstrated the potential to be used as an automated assay system.

Magnetically Driven Undulatory Microswimmers Integrating Multiple Rigid Segments

Mimicking biological locomotion strategies offers important possibilities and motivations for robot design and control methods. Among bioinspired microrobots, flexible microrobots exhibit remarkable efficiency and agility. These microrobots traditionally rely on soft material components to achieve undulatory propulsion, which may encounter challenges in design and manufacture including the complex fabrication processes and the interfacing of rigid and soft components. Herein, a bioinspired magnetically driven microswimmer that mimics the undulatory propulsive mechanism is proposed. The designed microswimmer consists of four rigid segments, and each segment is connected to the succeeding segment by joints. The microswimmer is fabricated integrally by 3D laser lithography without further assembly, thereby simplifying microrobot fabrication while enhancing structural integrity. Experimental results show that the microswimmer can successfully swim forward along guided directions via undulatory locomotion in the low Reynolds number (Re) regime. This work demonstrates for the first time that the flexible characteristic of microswimmers can be emulated by 3D structures with multiple rigid segments, which broadens possibilities in microrobot design. The proposed magnetically driven microswimmer can potentially be used in biomedical applications, such as medical diagnosis and treatment in precision medicine.

Capturing the Onset of Bacterial Pulmonary Infection in Acini-On-Chips

Bacterial invasion of the respiratory system leads to complex immune responses. In the deep alveolar regions, the first line of defense includes foremost the alveolar epithelium, the surfactant-rich liquid lining, and alveolar macrophages. Typical in vitro models come short of mimicking the complexity of the airway environment in the onset of airway infection; among others, they neither capture the relevant anatomical features nor the physiological flows innate of the acinar milieu. Here, novel microfluidic-based acini-on-chips that mimic more closely the native acinar airways at a true scale with an anatomically inspired, multigeneration alveolated tree are presented and an inhalation-like maneuver is delivered. Composed of human alveolar epithelial lentivirus immortalized cells and macrophages-like human THP-1 cells at an air-liquid interface, the models maintain critically an epithelial barrier with immune function. To demonstrate, the usability and versatility of the platforms, a realistic inhalation exposure assay mimicking bacterial infection is recapitulated, whereby the alveolar epithelium is exposed to lipopolysaccharides droplets directly aerosolized and the innate immune response is assessed by monitoring the secretion of IL8 cytokines. These efforts underscore the potential to deliver advanced in vitro biosystems that can provide new insights into drug screening as well as acute and subacute toxicity assays.

Rise of cyborg microrobot: different story for different configuration

By integrating organic parts achieved through evolution and inorganic parts developed by human civilisation, the cyborg microrobot is rising by taking advantage of the high flexibility, outstanding energy efficiency, extremely exquisite structure in the natural components and the fine upgradability, nice controllability in the artefact parts. Compared to the purely synthetic microrobots, the cyborg microrobots, due to the exceptional biocompatibility and biodegradability, have already been utilised in in situ diagnosis, precise therapy and other biomedical applications. In this review, through a thorough summary of recent advances of cyborg microrobots, the authors categorise the cyborg microrobots into four major classes according to the configuration between biomaterials and artefact materials, i.e. microrobots integrated inside living cell, microrobots modified with biological debris, microrobots integrated with single cell and microrobots incorporated with multiple cells. Cyborg microrobots with the four types of configurations are introduced and summarised with the combination approaches, actuation mechanisms, applications and challenges one by one. Moreover, they conduct a comparison among the four different cyborg microrobots to guide the actuation force promotion, locomotion control refinement and future applications. Finally, conclusions and future outlook of the development and potential applications of the cyborg microrobots are discussed.

Multi-level patterning nucleic acid photolithography

The versatile and tunable self-assembly properties of nucleic acids and engineered nucleic acid constructs make them invaluable in constructing microscale and nanoscale devices, structures and circuits. Increasing the complexity, functionality and ease of assembly of such constructs, as well as interfacing them to the macroscopic world requires a multifaceted and programmable fabrication approach that combines efficient and spatially resolved nucleic acid synthesis with multiple post-synthetic chemical and enzymatic modifications. Here we demonstrate a multi-level photolithographic patterning approach that starts with large-scale in situ surface synthesis of natural, modified or chimeric nucleic acid molecular structures and is followed by chemical and enzymatic nucleic acid modifications and processing. The resulting high-complexity, micrometer-resolution nucleic acid surface patterns include linear and branched structures, multi-color fluorophore labeling and programmable targeted oligonucleotide immobilization and cleavage.

Top-down fabrication-based nano/microparticles for molecular imaging and drug delivery

Recent breakthroughs in nanoparticle research have led to improved drug delivery and have overcome problems associated with normal drug delivery methods. Optimizing the design of nanoparticles in terms of controlled size, shape, and surface chemistry of nanoparticles can maximize the therapeutic efficacy. To maximize therapeutic effects, advanced formulation and fabrication methods have been developed. Biomedical applications of nanoparticles produced using the new fabrication techniques, including drug delivery and molecular imaging, have been widely explored. This review highlights the simple and versatile manufacturing techniques that can be used in the development of new types of nanoparticles that have strictly controlled physiochemical properties and their multifaceted advantages in drug delivery and molecular imaging.

Fabrication of porous NiTi biomedical alloy by SHS method

Having similar properties with natural bone, has made porous NiTi shape memory alloy (SMA) a promising material for biomedical applications. In this study porous NiTi SMA has synthesized with 30 and 40 vol.% green porosity by self propagating high temperature synthesis (SHS) from elemental Ni and Ti powders. After synthesizing, the average porosity of specimens reached to 36.8 and 49.8% for green compacts with 30 and 40 vol.% of green porosity, respectively. Combustion products were characterized by XRD, SEM, EDS and electrochemical polarization test. Although desired B2 (NiTi) phase was the dominant phase, other phases like Ti₂Ni, Ni₃Ti and Ni₄Ti₃ are found. Electrochemical polarization analysis in simulated body fluids (SBF) shows that, synthesized porous NiTi has better corrosion resistance than solid one and hydroxy apatite coating on porous NiTi worsen electrochemical corrosion resistance which is because of bioactive behavior of hydroxy apatite.

Preparation and Characterization of Perforated SERS Active Array for Particle Trapping and Sensitive Molecular Analysis

A gold-coated array of flow-through inverse pyramids applicable as substrate for entrapment and immobilization of micro-objects and for surface enhanced Raman spectroscopic measurements was fabricated using bulk micromachining techniques from silicon. Surface morphology, optical reflectance, immobilization properties, and surface enhanced Raman amplification of the array were modelled and characterized. It was found that the special perforated periodic 3D structure can be used for parallel particle and cell trapping and highly sensitive molecular analysis of the immobilized objects.

3D plotting in the preparation of newberyite, struvite, and brushite porous scaffolds: using magnesium oxide as a starting material

Calcium phosphate (CaP)-containing materials, such as hydroxyapatite and brushite, are well studied bone grafting materials owing to their similar chemical compositions to the mineral phase of natural bone and kidney calculi. In recent studies, magnesium phosphate (MgP)-containing compounds, such as newberyite and struvite, have shown promise as alternatives to CaP. However, the different ways in degradation and release of Mg²⁺ and Ca²⁺ ions in vitro may affect the biocompatibility of CaP and MgP-containing compounds. In the present paper, newberyite, struvite, and brushite 3D porous structures were constructed by 3D-plotting combining with a two-step cementation process, using magnesium oxide (MgO) as a starting material. Briefly, 3D porous green bodies fabricated by 3D-plotting were soaked in (NH₄)₂HPO₄ solution to form semi-manufactured 3D porous structures. These structures were then soaked in different phosphate solutions to translate the structures into newberyite, struvite, and brushite porous scaffolds. Powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectrometry (EDS) were used to characterize the phases, morphologies, and compositions of the 3D porous scaffolds. The porosity, compressive strength, in vitro degradation and cytotoxicity on MC3T3-E1 osteoblast cells were assessed as well. The results showed that extracts obtained from immersing scaffolds in alpha-modified essential media induced minimal cytotoxicity and the cells could be attached merely onto newberyite and brushite scaffolds. Newberyite and brushite scaffolds produced through our 3D-plotting and two-step cementation process showed the sustained in vitro degradation and excellent biocompatibility, which could be used as scaffolds for the bone tissue engineering.

Superior Oblique Myokymia: A Case Report of Surgical Treatment, Review of the Literature, and Consideration of Surgical Approach

BACKGROUND

Superior oblique myokymia (SOM) is a rare disorder characterized by episodic microtremor of the eyeball. in patients with SOM, intermittent contraction of the superior oblique muscle causes irregular and rotatory eye movement, causing oscillopsia and diplopia. Microvascular decompression (MVD) of the trochlear nerve is potentially a definitive treatment method for SOM; however, owing to its rarity, this disorder is not well-known to neurosurgeons, and thus the optimal surgical approach has not yet been determined.

CASE DESCRIPTION

A 77-year-old woman with left SOM had experienced oscillopsia for 2 years. MVD was performed via a left lateral superior cerebellar approach with the patient in the park-bench position. Her symptom resolved immediately after the surgery.

CONCLUSIONS

We believe that MVD via a left lateral superior cerebellar approach can be safely performed to SOM in elderly patients like our patient. Therefore, MVD should be considered as the definitive treatment method for more patients with SOM.

4D anisotropic skeletal muscle tissue constructs fabricated by staircase effect strategy

Like the morphology of native tissue fiber arrangement (such as skeletal muscle), unidirectional anisotropic scaffolds are highly desired as a means to guide cell behavior in anisotropic tissue engineering. In contrast, contour-like staircases exhibit directional topographical cues and are judged as an inevitable defect of fused deposition modeling (FDM). In this study, we will translate this staircase defect into an effective bioengineering strategy by integrating FDM with surface coating technique (FCT) to investigate the effect of topographical cues on regulating behaviors of human mesenchymal stem cells (hMSCs) toward skeletal muscle tissues. This integrated approach serves to fabricate shape-specific, multiple dimensional, anisotropic scaffolds using different biomaterials. 2D anisotropic scaffolds, first demonstrated with different polycaprolactone concentrations herein, efficiently direct hMSC alignment, especially when the scaffold is immobilized on a support ring. By surface coating the polymer solution inside FDM-printed sacrificial structures, 3D anisotropic scaffolds with thin wall features are developed and used to regulate seeded hMSCs through a self-established rotating bioreactor. Using layer-by-layer coating, along with a shape memory polymer, smart constructs exhibiting shape fix and recovery processes are prepared, bringing this study into the realm of 4D printing. Immunofluorescence staining and real-time quantitative polymerase chain reaction analysis confirm that the topographical cues created via FCT significantly enhance the expression of myogenic genes, including myoblast differentiation protein-1, desmin, and myosin heavy chain-2. We conclude that there are broad application potentials for this FCT strategy in tissue engineering as many tissues and organs, including skeletal muscle, possess highly organized and anisotropic extracellular matrix components.

Biofabrication of phenotypic pulmonary fibrosis assays

Biofabrication techniques have enabled the formation of complex models of many biological tissues. We present a framework to contextualize biofabrication techniques within a disease modeling application. Fibrosis is a progressive disease interfering with tissue structure and function, which stems from an aberrant wound healing response. Epithelial injury and clot formation lead to fibroblast invasion and activation, followed by contraction and remodeling of the extracellular matrix. These stages have healthy wound healing variants in addition to the pathogenic analogs that are seen in fibrosis. This review evaluates biofabrication of a variety of phenotypic cell-based fibrosis assays. By recapitulating different contributors to fibrosis, these assays are able to evaluate biochemical pathways and therapeutic candidates for specific stages of fibrosis pathogenesis. Biofabrication of these culture models may enable phenotypic screening for improved understanding of fibrosis biology as well as improved screening of anti-fibrotic therapeutics.

Influence of Micropatterning on Human Periodontal Ligament Cells' Behavior

The periodontal ligament (PDL) is highly ordered connective tissue located between the alveolar bone and cementum. An aligned and organized architecture is required for its physiological function. We applied micropatterning technology to arrange PDL cells in 10- or 20-μm-wide extracellular protein patterns. Cell and nuclear morphology, cytoskeleton, proliferation, differentiation, and matrix metalloproteinase system expression were investigated. Micropatterning clearly elongated PDL cells with a low cell-shape index and low spreading area. The nucleus was also elongated as nuclear height increased, but the nuclear volume remained intact. The cytoskeleton was rearranged to form prominent bundles at cells' peripheral regions. Moreover, proliferation was promoted by 10- and 20-μm micropatterning. Osteogenesis and adipogenesis were each inhibited, but micropatterning increased PDL cells' stem cell markers. β-catenin was expelled to cytoplasm. YAP/TAZ nuclear localization and activity both decreased, which might indicate their role in micropatterning-regulated differentiation. Collagen Ι expression increased in micropatterned groups. It might be due to the decreased expression of matrix metalloproteinase-1, 2 and the tissue inhibitor of metalloproteinase-1 gene expression elevation in micropatterned groups. The findings of this study provide insight into the effects of a micropatterned surface on PDL cell behavior and may be applicable in periodontal tissue regeneration.

Organ-on-chip models: Implications in drug discovery and clinical applications

Before a lead compound goes through a clinical trial, preclinical studies utilize two-dimensional (2D) in vitro models and animal models to study the pharmacodynamics and pharmacokinetics of that lead compound. However, these current preclinical studies may not accurately represent the efficacy and safety of a lead compound in humans, as there has been a high failure rate of drugs that enter clinical trials. All of these failures and the associated costs demonstrate a need for more representative models of human organ systems for screening in the preclinical phase of drug development. In this study, we review the recent advances in in vitro modeling including three-dimensional (3D) organoids, 3D microfabrication, and 3D bioprinting for various organs including the heart, kidney, lung, gastrointestinal tract (intestine-gut-stomach), liver, placenta, adipose, retina, bone, and brain as well as multiorgan models. The availability of organ-on-chip models provides a wealth of opportunities to understand the pathogenesis of human diseases and provide a potentially better model to screen a drug, as these models utilize a dynamic 3D environment similar to the human body. Although there are limitations of organ-on-chip models, the emergence of new technologies have refined their capability for translational research as well as precision medicine.

Photolithographic Fabrication of Micro Apertures in Dry Film Polymer Sheets for Channel Recordings in Planar Lipid Bilayers

Planar lipid bilayers constitute a versatile method for measuring the activity of protein channels and pores on a single molecule level. Ongoing efforts attempt to tailor this method for detecting biomedically relevant target analytes or for high-throughput screening of drugs. To improve the mechanical stability of bilayer recordings, we use a thin-film epoxy resist ADEX as septum in free-standing vertical bilayers. Defined apertures with diameters between 30 µm and 100 µm were micro-fabricated by photolithography. The performance of these septa was tested by functional reconstitution of the K+ channel KcvNTS in lipid bilayers spanned over apertures in ADEX or Teflon films; the latter is conventionally used in bilayer recordings and serves as reference. We observe that the functional properties of the K+ channel are identical in both materials while ADEX provides no advantage in terms of capacitance and signal-to-noise ratio. In contrast to Teflon, however, ADEX enables long-term experimental recordings while the stability of the lipid bilayer is not compromised by pipetting solutions in and out of the recording chamber. Combined with the fact that the ADEX films can be cleaned with acetone, our results suggest that ADEX carries great potential for multiplexing bilayer chambers in robust and reusable sensing devices.

Electrochemically Exfoliated High-Quality 2H-MoS2 for Multiflake Thin Film Flexible Biosensors

2D molybdenum disulfide (MoS₂ ) gives a new inspiration for the field of nanoelectronics, photovoltaics, and sensorics. However, the most common processing technology, e.g., liquid-phase based scalable exfoliation used for device fabrication, leads to the number of shortcomings that impede their large area production and integration. Major challenges are associated with the small size and low concentration of MoS₂ flakes, as well as insufficient control over their physical properties, e.g., internal heterogeneity of the metallic and semiconducting phases. Here it is demonstrated that large semiconducting MoS₂ sheets (with dimensions up to 50 µm) can be obtained by a facile cathodic exfoliation approach in nonaqueous electrolyte. The synthetic process avoids surface oxidation thus preserving the MoS₂ sheets with intact crystalline structure. It is further demonstrated at the proof-of-concept level, a solution-processed large area (60 × 60 µm) flexible Ebola biosensor, based on a MoS₂ thin film (6 µm thickness) fabricated via restacking of the multiple flakes on the polyimide substrate. The experimental results reveal a low detection limit (in femtomolar-picomolar range) of the fabricated sensor devices. The presented exfoliation method opens up new opportunities for fabrication of large arrays of multifunctional biomedical devices based on novel 2D materials.

INVESTIGATING VARIABLE RBE IN A 12C MINIBEAM FIELD WITH MICRODOSIMETRY AND GEANT4

An experimental and simulation-based study was performed on a 12C ion minibeam radiation therapy (MBRT) field produced with a clinical broad beam and a brass multi-slit collimator (MSC). Silicon-on-insulator (SOI) microdosimeters developed at the Centre for Medical Radiation Physics (CMRP) with micron sized sensitive volumes were used to measure the microdosimetric spectra at varying positions throughout the MBRT field and the corresponding dose-mean lineal energies and RBE for 10% cell survival (RBE10) were calculated using the modified Microdosimetric Kinetic Model (MKM). An increase in the average RBE10 of ∼30% and 10% was observed in the plateau region compared to broad beam for experimental and simulation values, respectively. The experimental collimator misalignment was determined to be 0.7° by comparison between measured and simulated microdosimetric spectra at varying collimator angles. The simulated dose-mean lineal energies in the valley region between minibeams were found to be higher on average than in the minibeams due to higher LET particles being produced in these regions from the MSC. This work presents the first experimental microdosimetry measurements and characterisation of the local biological effectiveness in a MBRT field.

Hang on tight: reprogramming the cell with microstructural cues

Cells interact intimately with complex microdomains in their extracellular matrix (ECM) and maintain a delicate balance of mechanical forces through mechanosensitive cellular components. Tissue injury results in acute degradation of the ECM and disruption of cell-ECM contacts, manifesting in loss of cytoskeletal tension, leading to pathological cell transformation and the onset of disease. Recently, microscale hydrogel constructs have been developed to provide cells with microdomains to form focal adhesion binding sites, which enable restoration of cytoskeletal tension. These synthetic anchors can recapitulate the complex 3D architecture of the native ECM to provide microtopographical cues. The mechanical deformation of proteins at the cell surface can activate signaling cascades to modulate downstream gene-level transcription, making this a unique materials-based approach for reprogramming cell behavior. An overview of the mechanisms underlying these mechanosensitive interactions in fibroblasts, stem and other cell types is provided to review their effects on cellular reprogramming. Recent investigations on the fabrication, functionalization and implementation of these materials and microtopographical features for drug testing and therapeutic applications are discussed.