Low-temperature NH3 abatement via selective oxidation over a supported copper catalyst with high Cu+ abundance

Selective catalytic NH3-to-N2 oxidation (NH3-SCO) is highly promising for abating NH3 emissions slipped from stationary flue gas after-treatment devices. Its practical application, however, is limited by the non-availability of low-cost catalysts with high activity and N2 selectivity. Here, using defect-rich nitrogen-doped carbon nanotubes (NCNT-AW) as the support, we developed a highly active and durable copper-based NH3-SCO catalyst with a high abundance of cuprous (Cu+) sites. The obtained Cu/NCNT-AW catalyst demonstrated outstanding activity with a T50 (i.e. the temperature to reach 50% NH3 conversion) of 174°C in the NH3-SCO reaction, which outperformed not only the Cu catalyst supported on N-free O-functionalized CNTs (OCNTs) or NCNT with less surface defects, but also those most active Cu catalysts in open literature. Reaction kinetics measurements and temperature-programmed surface reactions using NH3 as a probe molecule revealed that the NH3-SCO reaction on Cu/NCNT-AW follows an internal selective catalytic reaction (i-SCR) route involving nitric oxide (NO) as a key intermediate. According to mechanistic investigations by X-ray photoelectron spectroscopy, Raman spectroscopy, and X-ray absorption spectroscopy, the superior NH3-SCO performance of Cu/NCNT-AW originated from a synergy of surface defects and N-dopants. Specifically, surface defects promoted the anchoring of CuO nanoparticles on N-containing sites and, thereby, enabled efficient electron transfer from N to CuO, increasing significantly the fraction of SCR-active Cu+ sites in the catalyst. This study puts forward a new idea for manipulating and utilizing the interplay of defects and N-dopants on carbon surfaces to fabricate Cu+-rich Cu catalysts for efficient abatement of slip NH3 emissions via selective oxidation.

Construction of a self-reporting molecularly-imprinted electrochemical sensor based on CuHCF modified by rGNR-rGO for the detection of zearalenone

A self-reporting molecularly-imprinted electrochemical sensor is prepared for the detection of Zearalenone (ZEA). Firstly, the reduced graphene nanoribbons and reduced graphene oxide (rGNR-rGO) were simultaneously modified onto a glassy carbon electrode (GCE) to improve the sensor's sensitivity. After electrodepositing copper nanoparticles onto the rGNR-rGO/GCE, cyclic voltammetry scanning was performed in potassium ferrocyanide solution, and copper hexacyanoferrate (CuHCF) was deposited onto rGNR-rGO/GCE to further improve the sensor's sensitivity while giving it self-reporting capability. Then, molecularly-imprinted polymer films were prepared on the CuHCF/rGNR-rGO/GCE to ensure the selectivity of the sensor. It is found that the linear range of ZEA detection by the constructed sensor is 0.25-500 ng·mL -1, with a detection limit of 0.09 ng·mL -1. This sensor shows the merits of good selectivity, high sensitivity and accurate detection, providing a great possibility for the precise detection of low concentration ZEA in food.

Fast real-time monitoring of meat freshness based on fluorescent sensing array and deep learning: From development to deployment

A fluorescent sensor array (FSA) combined with deep learning (DL) techniques was developed for meat freshness real-time monitoring from development to deployment. The array was made up of copper metal nanoclusters (CuNCs) and fluorescent dyes, having a good ability in the quantitative and qualitative detection of ammonia, dimethylamine, and trimethylamine gases with a low limit of detection (as low as 131.56 ppb) in range of 5 ∼ 1000 ppm and visually monitoring the freshness of various meats stored at 4 °C. Moreover, SqueezeNet was applied to automatically identify the fresh level of meat based on FSA images with high accuracy (98.17 %) and further deployed in various production environments such as personal computers, mobile devices, and websites by using open neural network exchange (ONNX) technique. The entire meat freshness recognition process only takes 5 ∼ 7 s. Furthermore, gradient-weighted class activation mapping (Grad-CAM) and uniform manifold approximation and projection (UMAP) explanatory algorithms were used to improve the interpretability and transparency of SqueezeNet. Thus, this study shows a new idea for FSA assisted with DL in meat freshness intelligent monitoring from development to deployment.

Magnetic aptamer copper nanoclusters fluorescent biosensor for the visual detection of zearalenone based on docking-aided rational tailoring

To address the food safety issues caused by toxins, we established a fluorescent copper nanocluster biosensor based on magnetic aptamer for the visual and quantitative detection of ZEN. Specifically, we utilized the docking-aided rational tailoring (DART) strategy to analyze intermolecular force and interaction sites between zearalenone (ZEN) and the aptamer, and optimize the long-chain aptamer step by step to enhance the binding affinity by 3.4 times. The magnetic bead-modified aptamer underwent conformational changes when competing with complementary sequences to bind with ZEN. Then, the released complementary sequences will be amplified in template-free mode with the presence of the terminal deoxynucleotidyl transferase (TdT), and generating T-rich sequences as the core sequences for the luminescence of copper nanoclusters. The luminescence could be visualized and quantitatively detected through ultraviolet irradiation. The proposed label-free aptasensor exhibited high sensitivity and specificity, with a low limit of detection (LOD) of 0.1 ng/mL.

CoSn(OH)6 nanocubes as a solid sorbent for the effective preconcentration of copper ions in cinnamon (Cinnamomum zeylanicum) extract

This study was aimed at developing a simple and efficient CoSn(OH)6 nanocubes-based preconcentration method for the preconcentration of copper ions from cinnamon extracts for determination by flame atomic absorption spectrometry. The cube-shaped sorbent was synthesized using the simple stoichiometric co-precipitation method under ambient conditions. Experimental factors of the method were evaluated with a comprehensive optimization approach to maximize the extraction efficiency for the analyte. Under the optimal conditions, the limit of detection (LOD), limit of quantitation (LOQ), and linear dynamic range were recorded as 0.98 µg/L, 3.28 µg/L, and 4.0-75 µg/L, respectively. The enhancement factor was calculated as 101.6-fold by comparing the LODs of the optimized and direct analysis systems. Percent recoveries were found to be within an acceptable range (77.6-115 %), with high repeatability using matrix matching calibration strategy. Results validated the proposed method as a highly efficient extraction approach for the monitoring of copper ions in herbal cinnamon extracts.

Perovskite hydroxide-based laccase mimics with controllable activity for environmental remediation and biosensing

Constructing relatively inexpensive nanomaterials to simulate the catalytic performance of laccase is of great significance in recent years. Although research on improving laccase-like activity by regulating ligands of copper (amino acids or small organic molecules, etc.) have achieved remarkable success. There are few reports on improving laccase-like activity by adjusting the composition of metal Cu. Here, we used perovskite hydroxide AB(OH)6 as a model to evaluate the relationship between Cu based alloys and their laccase-like activity. We found that when the Cu/Mn alloy ratio of the perovskite hydroxide A point is greater than 1, the laccase-like activity of the binary alloy perovskite hydroxide is higher than that of the corresponding single Cu. Based on the measurements of XPS and ICP-MS, we deduced that the improvements of laccase-like activity mainly attribute to the ratio of Cu+/Cu2+and the content of Cu. Moreover, two types of substrates (toxic pollutants and catechol neurotransmitters) were used to successfully demonstrated such nanozymes' excellent environmental protecting function and biosensing property. This work will provide a novel approach for the construction and application of laccase-like nanozymes in the future.

Copper selenide nanosheets with photothermal therapy-related properties and multienzyme activity for highly effective eradication of drug resistance

Bacterial infections are among the most significant causes of death in humans. Chronic misuse or uncontrolled use of antibiotics promotes the emergence of multidrug-resistant superbugs that threaten public health through the food chain and cause environmental pollution. Based on the above considerations, copper selenide nanosheets (CuSe NSs) with photothermal therapy (PTT)- and photodynamic therapy (PDT)-related properties have been fabricated. These CuSe NSs possess enhanced PDT-related properties and can convert O2 into highly toxic reactive oxygen species (ROS), which can cause significant oxidative stress and damage to bacteria. In addition, CuSe NSs can efficiently consume glutathione (GSH) at bacterial infection sites, thus further enhancing their sterilization efficacy. In vitro antibacterial experiments with near-infrared (NIR) irradiation have shown that CuSe NSs have excellent photothermal bactericidal properties. These experiments also showed that CuSe NSs exerted excellent bactericidal effects on wounds infected with methicillin-resistant Staphylococcus aureus (MRSA) and significantly promoted the healing of infected wounds. Because of their superior biological safety, CuSe NSs are novel copper-based antimicrobial agents that are expected to enter clinical trials, serving as a modern approach to the major problem of treating bacterially infected wounds.

A self-assembled 3D nanoflowers based nano-ELISA platform for the sensitive detection of pyridaben

Biomimetic methods are invariably employed to synthesize hybrid organic-inorganic multilevel structure nanoflowers with self-assembly processes in aqueous solutions, which is an ideal way to meet the challenges of immobilizing antibodies or enzymes in nanomaterial based enzyme-linked immunosorbent assay (nano-ELISA). In this study, we developed protein-inorganic hybrid 3D nanoflowers composed of bovine serum albumin (BSA), horseradish peroxidase (HRP)-conjugated goat anti-mouse IgG (IgG-HRP) and copper(Ⅱ) phosphate (BSA-(IgG-HRP)-Cu3(PO4)2) using a self-assembly biomimetic method. The preparation process avoided the use of any organic solvent and protein immobilization did not require covalent modifications. Additionally, the unique hierarchical structure enhances the thermal and storage stability of HRP. The BSA-(IgG-HRP)-Cu3(PO4)2 hybrid 3D nanoflower was then applied to a nano-ELISA platform for pyridaben detection, achieving a 50% inhibition concentration of 3.90 ng mL-1. The nano-ELISA achieved excellent accuracy for pyridaben detection. Such a novel BSA-(IgG-HRP)-Cu3(PO4)2 hybrid 3D nanoflower provide an excellent reagent for small molecule immunoassay.

Bimetallic iron-copper nanozyme for determination and degradation of norfloxacin in foods

Iron-copper nanozymes (Fe-Cu NZs) with good peroxidase activity were prepared through hydrothermal method by using copper nitrate as copper source, iron acetate as iron source and 2, 5-dihydroxyterephthalic acid as organic ligand. Upon oxidation of the colourless TMB to light blue products by Fe-Cu NZs, the addition of Norfloxacin (NOR) resulted in a colour change to dark blue. The absorbance of the system correlated linearly with NOR concentration in the range of 3.3 μM to 66 μM, and the detection limit (LOD) was 0.386 μM. A rapid colourimetric assay for the determination of NOR in food matrices was developed, with a detection time of only one minute. Additionally, the assay facilitated the simultaneous catalytic degradation of NOR via Fe-Cu NZs. The primary degradation mechanism of NOR was identified as the transformation of the quinolone ring and the cleavage of the C9 = C10 double bond, which was substantiated by high-performance liquid chromatography (HPLC).

Complex formation of ML324, the histone demethylase inhibitor, with essential metal ions: Relationship between solution chemistry and anticancer activity

N-(3-(dimethylamino)propyl-4-(8-hydroxyquinolin-6-yl)benzamide (ML324, HL) is a potent inhibitor of the iron-containing histone demethylase KDM4, a recognized potential target of cancer therapeutics. Herein, we report the proton dissociation and complex formation processes of ML324 with essential metal ions such as Fe(II), Fe(III), Cu(II) and Zn(II) using UV-visible, fluorescence, electron paramagnetic resonance and 1H NMR spectroscopic methods. The electrochemical behaviour of the copper and iron complexes was characterized by cyclic voltammetry and spectroelectrochemistry. The solid phase structure of ML324 analysed by X-ray crystallography is also provided. Based on the solution equilibrium data, ML324 is present in solution in H2L+ form with a protonated dimethylammonium moiety at pH 7.4, and this (N,O) donor bearing ligand forms mono and bis complexes with all the studied metal ions and the tris-ligand species is also observed with Fe(III). At pH 7.4 the metal binding ability of ML324 follows the order: Fe(II) < Zn(II) < Cu(II) < Fe(III). Complexation with iron resulted in a negative redox potential (E'1/2 = -145 mV vs. NHE), further suggesting that the ligand has a preference for Fe(III) over Fe(II). ML324 was tested for its anticancer activity in chemosensitive and resistant human cancer cells overexpressing the efflux pump P-glycoprotein. ML324 exerted similar activity in all tested cells (IC50 = 1.9-3.6 μM). Co-incubation and complexation of the compound with Cu(II) and Zn(II) had no impact on the cytotoxicity of ML324, whereas Fe(III) decreased the toxicity in a concentration-dependent manner, and this effect was more pronounced in the multidrug resistant cells.

Integrated CO2 capture and reduction catalysis: Role of γ-Al2O3 support, unique state of potassium and synergy with copper

Carbon dioxide capture and reduction (CCR) process emerges as an efficient catalytic strategy for CO2 capture and conversion to valuable chemicals. K-promoted Cu/Al2O3 catalysts exhibited promising CO2 capture efficiency and highly selective conversion to syngas (CO + H2). The dynamic nature of the Cu-K system at reaction conditions complicates the identification of the catalytically active phase and surface sites. The present work aims at more precise understanding of the roles of the potassium and copper and the contribution of the metal oxide support. While γ-Al2O3 guarantees high dispersion and destabilisation of the potassium phase, potassium and copper act synergistically to remove CO2 from diluted streams and promote fast regeneration of the active phase for CO2 capture releasing CO while passing H2. A temperature of 350℃ is found necessary to activate H2 dissociation and generate the active sites for CO2 capture. The effects of synthesis parameters on the CCR activity are also described by combination of ex-situ characterisation of the materials and catalytic testing.

Chiral ligands and photothermal synergistic effects of inorganic nanoparticles for bacteria-killing

As the drawbacks of antibiotics in treating bacterial infections emerged, physical methods such as near-infrared-activated (NIR-activated) bacterial killing, have attracted great interests for their advantages of no resistance, short action time and few side effects. In this manuscript, NIR-activated bacteria-killing performance of chiral copper sulphide nanoparticles (L-/d-CuS NPs) was investigated using linearly polarized light (LPL) and circularly polarized light (CPL) as illumination sources, respectively. Chiral CuS NPs showed enhanced NIR-activated bacteria-killing effect compared with achiral CuS NPs under the same conditions. Moreover, these chiral CuS NPs showed obvious chirality-related antibacterial effect: the bacterial killing was more efficient under CPL activation, and L- and d-CuS NPs had higher antibacterial efficiency under left circularly polarized light (LCPL) and right circularly polarized light (RCPL), respectively. The possible mechanism of bacteria-killing performance for chiral CuS NPs was discussed in detailed. Photothermal bacteria-killing tests of chiral CuS NPs "sealed" in polydimethylsiloxane (PDMS) demonstrated the individual influence of photothermal effect. These observations in this paper could provide ideas for the potential applications of chiral nanostructures with enhanced photothermal effect in efficient bacterial killing.

Copper perchlorate catalyzed oxidative cyclisation of a novel bishydrazone ligand, formation of an unusual copper complex and in vitro biological implications

A novel hexadentate bishydrazone ligand, 1,10-bis(di(2-pyridyl)ketone) adipic acid dihydrazone (H2L1) is synthesized and characterized. With copper perchlorate as a catalytic oxidant, the ligand undergoes oxidative cyclisation and resulted in the formation of an unusual copper complex [Cu(L1a)2Cl]ClO4 (1), where L1a is 3-(2-pyridyl)triazolo[1,5-a]-pyridine. The Cu(II) complex was characterized physicochemically, while the molecular structure was confirmed by single crystal X- ray diffraction. In the complex cation, copper(II) is in a distorted trigonal bipyramidal coordination environment, surrounded by two triazolo nitrogen atoms and two pyridyl nitrogen atoms of L1a and a chloride atom. The relevant non covalent intermolecular interactions of the complex quantified using Hirshfeld surface analysis reveals that the O···H/ H···O (27.2%) contacts has the highest contribution. The solution phase bandgaps of the compounds were calculated using Tauc plot, whereas the solid-state band gaps were calculated by Kubelka-Munk model. DFT studies of the compounds indicate that the theoretical calculations corroborate with the experimental data. DPPH antioxidant activity assay of the synthesized compounds showed that the proligand H2L1 has a lower IC50 value (24.1 μM) than that of complex 1 (29.7 μM). The in vitro antibacterial activity was evaluated against Escherichia coli and Staphylococcus aureus, which revealed that complex 1 have excellent activity against E. coli, much as the standard ciprofloxacin. The cytotoxic efficacy investigation of the compounds against A549 (lung) adenocarcinoma cells suggested that H2L1 has more anticancer activity (IC50 value of 149.08 μM) than that of complex 1(IC50 value of 176.70 μM).

A new copper(II) complex containing long-chain aliphatic hydrazide and 1,10-phenanthroline upregulates ADP hydrolysis in triple-negative breast cancer cells

Copper can be opportunely complexed to modulate oncogenic pathways, being a promising strategy for cancer treatment. Herein, three new copper(II) complexes containing long-chain aliphatic hydrazides and 1,10-phenanthroline (1,10-phen), namely, [Cu(octh)(1,10-phen)(H2O)](NO3)21, [Cu(dech)(1,10-phen)(H2O)](NO3)22 and [Cu(dodh)(1,10-phen)(H2O)](NO3)2.H2O 3 (where octh = octanoic hydrazide, dech = decanoic hydrazide, dodh = dodecanoic hydrazide) were successfully prepared and characterized by several physical-chemical methods. Furthermore, X-ray structural analysis of complex 2 indicated that the geometry around the copper(II) ion is distorted square-pyramidal, in which hydrazide and 1,10-phenanthroline act as bidentate ligands. A water molecule in the apical position completes the coordination sphere of the metal ion. All new copper(II) complexes were cytotoxic to breast cancer cell lines (MCF7, MDA-MB-453, MDA-MB-231, and MDA-MB-157) and selective when compared to the non tumor lineage MCF-10A. In particular, complex 2 showed half-maximal inhibitory concentration (IC50) values ranging between 2.7 and 13.4 μM in MDA-MB231 cells after 24 and 48 h of treatment, respectively. Furthermore, this complex proved to be more selective for tumor cell lines when compared to doxorubicin and docetaxel. Complex 2 inhibited the clonogenicity of MDA-MB231 cells, increasing adenosine diphosphate (ADP) hydrolysis and upregulating ecto-nucleoside triphosphate diphosphohydrolase 1 (ENTPD1) transcriptional levels. In this sense, we suggest that the inhibitory effect on cell proliferation may be related to the modulation of adenosine monophosphate (AMP) levels. Thus, a novel copper(II) complex with increased cytotoxic effects and selectivity against breast cancer cells was obtained, contributing to medicinal chemistry efforts toward the development of new chemotherapeutic agents.

Amino-functionalized cellulose composite for efficient simultaneous adsorption of tetracycline and copper ions: Performance, mechanism and DFT study

A novel cellulose composite (denoted as PEI@MMA-1) with porous interconnected structure was prepared by adsorbing methyl cellulose (MC) onto microcrystalline cellulose (MCC) and cross-linking polyethyleneimine (PEI) with MCC by the action of epichlorohydrin, which had the excellent adsorption property, wettability and elasticity. The performances of PEI@MMA-1 composite for removing tetracycline (TC), Cu2+ and coexistent pollutant (TC and Cu2+ mixture) were systematically explored. For single TC or Cu2+ contaminant, the maximum adsorption capacities were 75.53 and 562.23 mg/g at 30 °C, respectively, while in the dual contaminant system, they would form complexes and Cu2+ could play a "bridge" role to remarkably promote the adsorption of TC with the maximum adsorption capacities of 281.66 and 253.58 mg/g for TC and Cu2+. In addition, the adsorption kinetics, isotherms and adsorption mechanisms of single-pollutant and dual-pollutant systems have been thoroughly investigated. Theoretical calculations indicated that the amide group of TC molecule with the assistance of Cu2+ interacted with the hydroxyl group of PEI@MMA-1 composite to enhance the TC adsorption capacity. Cycle regeneration and fixed bed column experiments revealed that the PEI@MMA-1 possessed the excellent stability and utility. Current PEI@MMA-1 cellulose composite exhibited a promising application for remediation of heavy metals and antibiotics coexistence wastewater.

Azoanthracene-core structure as Cu2+-assisted CO sensing probe: Characterization, performance, and bioimaging

Detection of endogenous CO (carbon monoxide) is an interesting topic in biology because it has been discovered as a messenger for signal transduction and therapeutic effects in vital biological activities. Fluorescence imaging has proven a powerful tool for detecting endogenous CO, which drives the development of low-cost and easy-to-use fluorescent probes. In this study, four azobenzene derivatives (A1, A2, A3, and A4) with various substituents were reported, including their geometric structures, photophysical parameters, and spectral responses to Cu2+ and CO. The relationship between substituent structure and performance was discussed along with Cu2+ quenching and CO sensing mechanisms. The optimal probe (A1), which had no substituent, efficiently quenched fluorescence in the presence of Cu2+, with its PLQY decreased from 0.33 to 0.02, PLQY = photoluminescence quantum yield. Upon CO deoxidization, A1's fluorescence could be recovered (PLQY recovered to 0.32) within 180 s. Its sensing mechanism was static by forming a non-fluorescent complex with Cu2+ (with a stoichiometric ratio of 1:1). The bioimaging performance of A1 for endogenous CO in HeLa cells was reported.

Copper-mediated cyclization of thiosemicarbazones leading to 1,3,4-thiadiazoles: Structural elucidation, DFT calculations, in vitro biological evaluation and in silico evaluation studies

Cancer's global impact necessitates innovative and less toxic treatments. Thiosemicarbazones (TSCs), adaptable metal chelators, offer such potential. In this study, we have synthesized N (4)-substituted heterocyclic TSCs from syringaldehyde (TSL1, TSL2), and also report the unexpected copper-mediated cyclization of the TSCs to form thiadiazoles (TSL3, TSL4), expanding research avenues. This work includes extensive characterization and studies such as DNA/protein binding, molecular docking, and theoretical analyses to demonstrate the potential of the as-prepared TSCs and thiadiazoles against different cancer cells. The DFT results depict that the thiadiazoles exhibit greater structural stability and reduced reactivity compared to the corresponding TSCs. The docking results suggest superior EGFR inhibition for TSL3 with a binding constant value of - 6.99 Kcal/mol. According to molecular dynamics studies, the TSL3-EGFR complex exhibits a lower average RMSD (1.39 nm) as compared to the TSL1-EGFR complex (3.29 nm) suggesting that both the thiadiazole and thiosemicarbazone examined here can be good inhibitors of EGFR protein, also that TSL3 can inhibit EGFR better than TSL1. ADME analysis indicates drug-likeness and oral availability of the thiadiazole-based drugs. The DNA binding experiment through absorption and emission spectroscopy discovered that TSL3 is more active towards DNA which is quantitatively calculated with a Kb value of 4.74 × 106 M-1, Kq value of 4.04 × 104 M-1and Kapp value of 5 × 106 M-1. Furthermore, the BSA binding studies carried out with fluorescence spectroscopy showed that TSL3 shows better binding capacity (1.64 × 105 M-1) with BSA protein. All the compounds show significant cytotoxicity against A459-lung, MCF-7-breast, and HepG2-liver cancer cell lines; TSL3 exhibits the best cytotoxicity, albeit less effective than cisplatin. Thiadiazoles demonstrate greater cytotoxicity than the TSCs. Overall, the promise of TSCs and thiadiazoles in cancer research is highlighted by this study. Furthermore, it unveils unexpected copper-mediated cyclization of the TSCs to thiadiazoles.

An antibacterial membrane based on Janus bacterial cellulose with nano-sized copper oxide through polydopamine conjugation for infectious wound healing

Bacterial cellulose (BC) produced by Acetobacter xylinum has great advantages in wound dressing. However, the structural limitation under static culture, and lack of antibacterial properties restrict its application, especially for infectious wound healing. The present study reported an original wound dressing, which was composed of a Janus BC membrane with antibacterial nano-sized copper oxide (CuO) through polydopamine (PDA) conjugation to promote wound healing under infectious condition. The finished product (CuO/PDA/BC membrane) exhibited favorable air permeability, high hydrophilicity and good mechanical properties, as well as strong antibacterial effects by the sustained release of CuO and photothermal effect of CuO/PDA. Furthermore, CuO/PDA/BC membrane inhibited inflammatory response and promoted wound healing in an infectious wound model in vivo. These results suggested that our CuO/PDA/BC membrane had great potential as wound dressing for infectious wound healing.

A novel laccase-like Cu-MOF for colorimetric differentiation and detection of phenolic compounds

The development of convenient, fast, and cost-effective methods for differentiating and detecting common organic pollutant phenols has become increasingly important for environmental and food safety. In this study, a copper metal-organic framework (Cu-MOF) with flower-like morphology was synthesized using 2-methylimidazole (2-MI) as ligands. The Cu-MOF was designed to mimic the natural laccase active site and proved demonstrated excellent mimicry of enzyme-like activity. Leveraging the superior properties of the constructed Cu-MOF, a colorimetric method was developed for analyzing phenolic compounds. This method exhibited a wide linear range from 0.1 to 100 μM with a low limit of detection (LOD) of 0.068 μM. Besides, by employing principal component analysis (PCA), nine kinds of phenols was successfully distinguished and identified. Moreover, the combination of smartphones with RGB profiling enabled real-time, quantitative, and high-throughput detection of phenols. Therefore, this work presents a paradigm and offers guidance for the differentiation and detection of phenolic pollutants in the environment.

Cu-doped Fe3O4 nanoparticles for efficient detoxification of epsilon toxin: Toward substituting magnetically recyclable detoxifying agent for formaldehyde

This research presents the synthesis and characterization of Cu-doped Fe3O4 (Cu-Fe3O4) nanoparticles as a magnetically recoverable and reusable detoxifying agent for the efficient and long-lasting neutralization of bacterial toxins. The nanoparticles were synthesized using the combustion synthesis method and characterized through SEM, XRD, BET, TGA, and VSM techniques. The detoxification potential of Cu-Fe3O4 was compared with traditional formaldehyde (FA) in detoxifying epsilon toxin (ETx) from Clostridium perfringens Type D, the causative agent of enterotoxemia in ruminants. In vivo residual toxicity tests revealed that Cu-Fe3O4 could detoxify ETx at a concentration of 2.0 mg mL-1 within 4 days at room temperature (RT) and 2 days at 37 °C, outperforming FA (12 and 6 days at RT and 37 °C, respectively). Characterization studies using dynamic light scattering (DLS) and circular dichroism (CD) highlighted lower conformational changes in Cu-Fe3O4-detoxified ETx compared to FA-detoxified ETx. Moreover, Cu-Fe3O4-detoxified ETx exhibited exceptional storage stability at 4 °C and RT for 6 months, maintaining an irreversible structure with no residual toxicity. The particles demonstrated remarkable reusability, with the ability to undergo five continuous detoxification batches. This study provides valuable insights into the development of an efficient and safe detoxifying agent, enabling the production of toxoids with a native-like structure. The magnetically recoverable and reusable nature of Cu-Fe3O4 nanoparticles offers practical advantages for easy recovery and reuse in detoxification reactions.

The green cupredoxin CopI is a multicopper protein able to oxidize Cu(I)

Anthropogenic activities in agriculture and health use the antimicrobial properties of copper. This has led to copper accumulation in the environment and contributed to the emergence of copper resistant microorganisms. Understanding bacterial copper homeostasis diversity is therefore highly relevant since it could provide valuable targets for novel antimicrobial treatments. The periplasmic CopI protein is a monodomain cupredoxin comprising several copper binding sites and is directly involved in copper resistance in bacteria. However, its structure and mechanism of action are yet to be determined. To study the different binding sites for cupric and cuprous ions and to understand their possible interactions, we have used mutants of the putative copper binding modules of CopI and spectroscopic methods to characterize their properties. We show that CopI is able to bind a cuprous ion in its central histidine/methionine-rich region and oxidize it thanks to its cupredoxin center. The resulting cupric ion can bind to a third site at the N-terminus of the protein. Nuclear magnetic resonance spectroscopy revealed that the central histidine/methionine-rich region exhibits a dynamic behavior and interacts with the cupredoxin binding region. CopI is therefore likely to participate in copper resistance by detoxifying the cuprous ions from the periplasm.

Copper complex molecules as dye-sensitizers: Hybrid MetaGGA and standard + van der Waals functionals

This study focuses on the use of Density Functional Theory calculations with two main approaches: computational chemistry and computational physics. The following three cases were considered for the derivation: (I) computational chemistry using the M06 hybrid functional, (II) computational chemistry using the standard PBE functional including vdW interactions, and (III) computational physics using the standard PBE functional including vdW interactions and periodic boundary conditions. Since the approximation using hybrid functionals M06 has been extensively validated, this method was used as a reference. The second and third methods are less expensive, it is ideal for use to extend large systems. From the sensitized molecules are found in the gas phase and include solvent effects through the integral equation formalism polarizable continuum model. In a systematic analysis of 15 Cu complex molecules, a complete characterization for DSSCs has been carried out and molecular geometry, electronic and optical measurements have been reported.

Iron decoration in binary graphene oxide and copper iron sulfide nanocomposites boosting catalytic antibacterial activity in acidic microenvironment against antimicrobial resistance

The strong antimicrobial resistance (AMR) of multidrug-resistant (MDR) bacteria and biofilm, especially the biofilm with extracellular polymeric substance (EPS) protection and persister cells, not only renders antibiotics ineffective but also causes chronic infections and makes the infectious tissue difficult to repair. Considering the acidic properties of bacterial infection microenvironment and biofilm, herein, a binary graphene oxide and copper iron sulfide nanocomposite (GO/CuFeSx NC) is synthesized by a surfactant free strategy and utilized as an alternative smart nanozyme to fight against the MDR bacteria and biofilm. For the GO/CuFeSx NC, the iron decoration facilitates the well distribution of bimetallic CuFeSx NPs on the GO surfaces compared to monometallic CuS NPs, providing synergistically enhanced peroxidase (POD)-like activity in acidic medium (pH 4 ∼ 5) and intrinsic strong near infrared (NIR) light responsive photothermal activity, while the ultrathin and sharp structure of 2D GO nanosheet allows the GO/CuFeSx NC to strongly interact with the bacteria and biofilm, facilitating the catalytic and photothermal attacks on the bacterial surfaces. In addition, the GO in GO/CuFeSx NC exhibits a "Pseudo-Photo-Fenton" effect to promote the ROS generation. Therefore, the GO/CuFeSx NC can effectively kill bacteria and biofilm both in vitro and in vivo, finally eliminating the infections and accelerating the tissue repair when treating the biofilm-infected wound. This work paves a new way to the design of novel nanozyme for smart antibacterial therapy against antimicrobial resistance.

Prednisone and ibuprofen conjugate Janus dendrimers and their anticancer activity

Drug release from hyperbranched Janus dendrimer-drug conjugates and their subsequent activity are influenced by the different drugs in each dendron and the linker. To understand these effects, we synthetized new Janus-type dendrimers of first and second generation. One dendron with 2,2-Bis(hydroxymethyl)propionic acid functionalized with ibuprofen and the second dendron was obtained with 3-aminopropanol-amidoamine and prednisone. The dendrimers were obtained by copper(I)-catalyzed Click azide-alkyne cycloaddition for the formation of a triazole as a dendrimeric nucleus of Janus dendrimer conjugates are reported. The influence of ibuprofen, prednisone, and spacer on cancer activity of Janus dendrimers conjugates is reported. The IC50 values of the anticancer activity on cancer cell lines the Janus dendrimer of second generation was higher in comparison to the first generation dendrimer. Similarly, the anticancer activity was higher compared to the dendron conjugates. Also, no cytotoxic effects of dendrons and dendrimers on non-cancerous kidney COS-7 cell line was observed. The interesting anticancer activity of the prepared prednisone-ibuprofen Janus dendrimer conjugates suggest that the dendrimers could be of potential use as new anticancer drug.

Promising biomedical systems based on copper nanoparticles: Synthesis, characterization, and applications

Copper and copper oxide nanoparticles (CuNPs) have unique physicochemical properties that make them highly promising for biomedical applications. This review discusses the application of CuNPs in biomedicine, including diagnosis, therapy, and theranostics. Recent synthesis methods, with an emphasis on green approaches, are described, and the latest techniques for nanoparticle characterization are critically analyzed. CuNPs, including Cu2O, CuO, and Cu, have significant potential as anti-cancer agents, drug delivery systems, and photodynamic therapy enhancers, among other applications. While challenges such as ensuring biocompatibility and stability must be addressed, the state-of-the-art research reviewed here provides strong evidence for the efficacy and versatility of CuNPs. These multifunctional properties have been extensively researched and documented, showcasing the immense potential of CuNPs in biomedicine. Overall, the evidence suggests that CuNPs are a promising avenue for future research and development in biomedicine. We strongly support further progress in the development of synthesis and application strategies to enhance the effectiveness and safety of CuNPs for clinical purposes.

Exceptional stability of ultrasmall cubic copper metal nanoclusters - a molecular dynamics study

The fabrication of shape-selective coinage metal nanoclusters (MNCs) has promising applications due to their exceptional physical and chemical molecule-like properties. However, the stability of the specific geometry of the nanoclusters, such as their cubic shapes, is unclear and has been unraveled by assessing the nanoclusters' interactions with different environments. In this work, we investigate the morphological stability of cubic structured, coinage metal nanoclusters of varying sizes ranging from 14 to 1099 atoms. The impact of solvent environments like water and the presence of ionic liquids (IL) on the stabilization of the MNCs were assessed using molecular dynamics (MD) simulations. In general, smaller MNCs composed of less than 256 atoms encountered structural distortion easily compared to the larger ones, which preserved their cubic morphology with minimal surface aberrations in water. However, in the presence of 4M 1-butyl-1,1,1-trimethyl ammonium methane sulfonate [N1114][C1SO3] IL solution, the overall cubic shape of the MNCs was successfully preserved. Strikingly, it is observed that in contrast to the noble MNCs like Au and Ag, the cubic morphology for Cu MNCs with sizes less than 256 atoms exhibited significant stability even in the absence of IL.

H2S-driven chemotherapy and mild photothermal therapy induced mitochondrial reprogramming to promote cuproptosis

The elevated level of hydrogen sulfide (H2S) in colon cancer hinders complete cure with a single therapy. However, excessive H2S also offers a treatment target. A multifunctional cascade bioreactor based on the H2S-responsive mesoporous Cu2Cl(OH)3-loaded hypoxic prodrug tirapazamine (TPZ), in which the outer layer was coated with hyaluronic acid (HA) to form TPZ@Cu2Cl(OH)3-HA (TCuH) nanoparticles (NPs), demonstrated a synergistic antitumor effect through combining the H2S-driven cuproptosis and mild photothermal therapy. The HA coating endowed the NPs with targeting delivery to enhance drug accumulation in the tumor tissue. The presence of both the high level of H2S and the near-infrared II (NIR II) irradiation achieved the in situ generation of photothermic agent copper sulfide (Cu9S8) from the TCuH, followed with the release of TPZ. The depletion of H2S stimulated consumption of oxygen, resulting in hypoxic state and mitochondrial reprogramming. The hypoxic state activated prodrug TPZ to activated TPZ (TPZ-ed) for chemotherapy in turn. Furthermore, the exacerbated hypoxia inhibited the synthesis of adenosine triphosphate, decreasing expression of heat shock proteins and subsequently improving the photothermal therapy. The enriched Cu2+ induced not only cuproptosis by promoting lipoacylated dihydrolipoamide S-acetyltransferase (DLAT) heteromerization but also performed chemodynamic therapy though catalyzing H2O2 to produce highly toxic hydroxyl radicals ·OH. Therefore, the nanoparticles TCuH offer a versatile platform to exert copper-related synergistic antitumor therapy.

Versatile Fluorescence Lifetime-Based Copper Probe to Quantify Mitochondrial Membrane Potential and Reveal Its Interaction with Protein Aggregation

Mitochondria play a crucial role in maintaining cellular homeostasis, and the depolarization of mitochondrial membrane potential (MMP) is an important signal of apoptosis. Additionally, protein misfolding and aggregation are closely related to diseases including neurodegenerative diseases, diabetes, and cancers. However, the interaction between MMP changes and disease-related protein aggregation was rarely studied. Herein, we report a novel "turn-on" fluorescent probe MitoRhB that specifically targets to mitochondria for Cu2+ detection in situ. The fluorescence lifetime (τ) of MitoRhB exhibits a positive correlation with MMP changes, allowing us to quantitatively determine the relative MMP during SOD1 (A4 V) protein aggregation. Finally, we found that (1) the increasing concentrations of copper will accelerate the depolarization of mitochondria and reduce MMP; (2) the depolarization of mitochondria can intensify the degree of protein aggregation, suggesting a new routine of copper-induced cell death mediated through abnormal MMP depolarization and protein aggregation.

A dual-mode fluorometric/colorimetric sensor for sulfadimethoxine detection based on Prussian blue nanoparticles and carbon dots

A dual-mode (colorimetric/fluorescence) nanoenzyme-linked immunosorbent assay (NLISA) was developed based on Au-Cu nanocubes generating Prussian blue nanoparticles (PBNPs). It is expected that this method can be used to detect the residues of sulfonamides in the field, and solve the problem of long analysis time and high cost of the traditional method. Sulfadimethoxine (SDM) was selected as the proof-of-concept target analyte. The Au-Cu nanocubes were linked to the aptamer by amide interaction, and the Au-Cu nanocubes, SDM and antibody were immobilized on a 96-well plate using the sandwich method. The assay generates PBNPs by oxidising the Cu shells on the Au-Cu nanocubes in the presence of hydrochloric acid, Fe3+ and K3[Fe (CN)6]. In this process, the copper shell undergoes oxidation to Cu2+ and subsequently Cu2 + further quenches the fluorescence of the carbon point. PBNPs exhibit peroxidase-like activity, oxidising 3,3',5,5'-tetramethylbenzidine (TMB) to OX-TMB in the presence of H2O2, which alters the colorimetric signal. The dual-mode signals are directly proportional to the sulfadimethoxine concentration within the range 10- 3~10- 7 mg/mL. The limit of detection (LOD) of the assay is 0.023 ng/mL and 0.071 ng/mL for the fluorescent signal and the colorimetric signal, respectively. Moreover, the assay was successfully applied to determine sulfadimethoxine in silver carp, shrimp, and lamb samples with satisfactory results.

Realizing Ultrasensitive and Accurate Point-of-Care Profiling for ATP with a Triple-Mode Strategy Based on the ATP-Induced Reassembly of a Copper Coordination Polymer Nanoflower

New strategies for accurate and reliable detection of adenosine triphosphate (ATP) with portable devices are significant for biochemical analysis, while most recently reported approaches cannot satisfy the detection accuracy and independent of large instruments simultaneously, which are unsuitable for fast, simple, and on-site ATP monitoring. Herein, a unique, convenient, and label-free point-of-care sensing strategy based on novel copper coordination polymer nanoflowers (CuCPNFs) was fabricated for multimode (UV-vis, photothermal, and RGB values) onsite ATP determination with high selectivity, sensitivity, and accuracy. The resulting CuCPNFs with a 3D hierarchical structure exhibit the ATP-triggered decomposition behavior because the competitive coordination between ATP and the copper ions of CuCPNFs can result in the formation of ATP-Cu, which reveals preeminent peroxidase mimics activity and can accelerate the oxidation of 3, 3', 5, 5'-tetramethylbenzidine (TMB) to form oxTMB. During this process, the detection system displayed not only color changes but also a strong NIR laser-driven photothermal effect. Thus, the photothermal and color signal variations are easily monitored by a portable thermometer and a smartphone. This multimode point-of-care platform can meet the requirements of onsite, without bulky equipment, accuracy, and reliability all at once, greatly enhancing its application in practice and paving a new way in ATP analysis.

MOF-derived NiCo hydroxide for highly efficient non-enzymatic glucose biosensing

An efficient and robust electrocatalyst is significant for glucose biosensing. The emergence of metal-organic framework (MOF) derived materials opens up new avenues for the development of high-performance glucose sensing catalysts. Herein, MOF derived nickel-cobalt hydroxide supported on conductive copper sheet (NiCo-OH/Cu sheet) is prepared at room temperature. The as-obtained NiCo-OH is endowed with three-dimensional network structure which enables the effective exposure of active materials, sufficient contact between glucose molecule and catalyst. The NiCo-OH/Cu sheet is revealed as good glucose electrochemical sensing material with a wide linear range of 0.05∼6.0 mM and a high sensitivity of 1340μA mM-1cm-2. Additionally, the as-fabricated NiCo-OH/Cu sheet displays good anti-interference ability and long-term stability.

Synthesis, structural, molecular docking, and in vitro biological activities of Cu-doped ZnO nanomaterials

Copper-doped ZnO nanoparticles with the formula Zn1-x(Cu)O, where x = 0.0, 0.03, 0.05, and 0.07 were produced using the co-precipitation process. Physical, chemical, and structural properties were properly examined. Powdered X-ray diffraction (P-XRD) patterns revealed the formation of hexagonal wurtzite crystal structure in all samples, through atomic substitutional incorporation in the Cu-doped ZnO lattice. The presence of Cu ions and their dissolution in the host ZnO crystal structure was supported by FT-IR spectra. HR-TEM images were used to assess the average size, morphology, and shape regularity of the synthesized samples. The form and homogeneity of the ZnO changed when Cu ions were substituted, as evidenced by FE-SEM/EDX analysis. The presence of copper signals in the Cu-doped samples indicates that the doping was successful. The decrease in zeta potential with an increased copper doping percentage designates that the nanoparticles (NPs) are more stable, which could be attributed to an increase in the ionic strength of the aqueous solution. The synthesized NPs were evaluated for their substantial in vitro antioxidant properties. In addition, the antimicrobial efficacy of the materials was tested against pathogenic microorganisms. Regarding the anti-diabetic activity, the 7Cu ZnO sample showed the highest inhibitory effect on the α-amylase enzyme. No variations were observed in the activities of the acetylcholinesterase enzyme (AChE) and proteinase enzymes with ZnO and samples doped with different concentrations of Cu. Therefore, further studies are recommended to reveal the in-vitro anti-diabetic activity of the studied doped samples. Finally, molecular docking provided valuable insights into the potential binding interactions of Cu-doped ZnO with α-amylase, FabH of E. coli, and Penicillin-binding proteins of S. aureus. These outcomes suggest that the prepared materials may have an inhibitory effect on enzymes and hold promise in the battle against microbial infections and diabetes.

Immunogenic Cell Death Induction and Oxygenation by Multifunctional Hollow Silica/Copper-Doped Carbon Dots

The metastasis and recurrence of cancer are related to immunosuppression and hypoxia in the tumor microenvironment. Activating immune activity and improving the hypoxic environment face essential challenges. This paper reports on a multifunctional nanomaterial, HSCCMBC, that induces immunogenic cell death through powerful photodynamic therapy/chemodynamic therapy synergistic antitumor effects. The tumor microenvironment changed from the immunosuppressive type to immune type, activated the immune activity of the system, decomposed hydrogen peroxide to generate oxygen based on Fenton-like reaction, and effectively increased the level of intracellular O2 with the assistance of 3-bromopyruvate, a cell respiratory inhibitor. The structure and composition of HSCCMBC were characterized by transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, infrared spectroscopy, etc. Oxygen probe RDPP was used to investigate the oxygen level inside and outside the cell, and hydroxyl radical probe tetramethylbenzidine was used to investigate the Fenton-like reaction ability. The immunofluorescence method investigated the expression of various immune markers and hypoxia-inducing factors in vitro and in vivo after treatment. In vitro and in vivo experiments indicate that HSCCMBC is an excellent antitumor agent and is expected to be a candidate drug for antitumor immunotherapy.

Beyond copper: examining the significance of His-mutations in mycobacterial GroEL1 HRCT for Ni(II) complex stability and formation

Recently, we have studied the coordination chemistry of the Cu(II)-histidine-rich C-terminal tail (HRCT) complex of the mycobacterial GroEL1 protein. The structure of this domain differs significantly compared to the well-known methionine-glycine-rich GroEL chaperonin - it was predicted that mycobacterial GroEL1 could play a significant role in the metal homeostasis of Mycobacteria, especially copper. However, we found that this particular domain's pattern also repeats in a number of Ni(II)-binding proteins. Here, we present the studies concerning the properties of GroEL1 HRCT as a ligand for Ni(II) ions. For this purpose, we chose eight model peptides: L1 - Ac-DHDHHHGHAH, L2 - Ac-DKPAKAEDHDHHHGHAH, and 6 mutants of the latter in the pH range of 2-11. We examined the stoichiometry, stability, and spectroscopic features of copper complexes. We noticed that similar to the Cu(II)-complex, the presence of a Lys5 residue significantly increases the stability of the system. The impact of His mutations was also examined and carefully studied using NMR spectroscopy. His9 and His13 are the crucial residues for Ni(II) binding, whereas His12 has minimal relevance in complex formation.

Evaluation of Copper(II) Transfer between Amyloid-beta Peptides by Relaxation-Induced Dipolar Modulation Enhancement (RIDME)

In the brains of Alzheimer's disease patients, fibrillar aggregates containing amyloid-beta (Aβ) peptides are found, along with elevated concentrations of Cu(II) ions. The aggregation pathways of Aβ peptides can be modulated by Cu(II) ions and is determined by the formation and nature of the Cu(II)-Aβ complex. If spin-labeled, the Cu(II)-Aβ complex contains two dipolar coupled paramagnetic centers, the spin label and the Cu(II) ion. Measurement of the dipolar coupling between these paramagnetic centers by relaxation-induced dipolar modulation enhancement (RIDME) allows to monitor the complex formation and thus opens a way to follow the Cu(II) transfer between peptides if a mixture of wild-type and spin-labeled ones is used. We evaluate this approach for a specific Cu(II)-Aβ complex, the aggregation-inert Component II. The kinetics of the Cu(II) transfer can be resolved by performing RIDME in a time-dependent manner. A temporal resolution of seconds has been achieved, with the potential to reach milliseconds, using a rapid-freeze quench device to stop the Cu(II) transfer in solution after defined incubation times.

Preparation of copper nanoparticles fluorescent probes and detection of hydrogen peroxide and glucose

Fluorescent copper nanoparticles (CuNPs) was synthesized by one-step chemical reduction method using ascorbic acid (AA) and copper sulfate (CuSO4⋅5H2O) as raw materials, which had good water solubility and fluorescence properties. A green, simple and safe CuNPs@Fe2+ fluorescence probe was developed for the detection of hydrogen peroxide and glucose using Fe2+ as a bridge. The prepared CuNPs could obtain the maximum fluorescence emission wavelength at 440 nm when the excitation wavelength was 360 nm. The average particle size of CuNPs was 10 nm, which had good photobleach resistance, stability and salt tolerance. The fluorescence intensity was quenched due to electron transfer (ET) process when hydrogen peroxide was added to CuNPs@Fe2+ system. This result was mainly because Fenton reaction occured between hydrogen peroxide and Fe2+, producing hydroxyl free radicals (OH) and Fe3+. Since glucose could be catalyzed by specific glucose oxidase (GOX) to produce H2O2 and corresponding oxidation products, the quantitative analysis of glucose was realized when glucose oxidase was introduced into the CuNPs@Fe2+ sensor system. Therefore, a novel CuNPs@Fe2+ fluorescent probe sensor study was constructed to further achieve quantitative detection of H2O2 and glucose. Under the optimized experimental conditions, the linear ranges for H2O2 and glucose were 28.219-171.562 μM and 1.237-75.771 μM, respectively. And the detection limits for H2O2 and glucose were 7.169 μM and 0.540 μM, respectively. In addition, the mechanism of fluorescence probe quenching caused by the interaction between H2O2 and CuNPs@Fe2+ was also discussed. The proposed sensing system had been applied successfully to the detection of glucose in human serum samples.

Efficient removal of tetracycline and Cu2+ by honeycomb derived magnetic carbon: Adsorption mechanism and advanced oxidation regeneration mechanism

The honeycomb magnetic carbons (xFe@HCNs) were prepared by sacrificial template method novelty using polyacrylamide resin (PAAS) as template and ammonium pyrrolidine dithioate/Fe3+ complex (APDC-Fe) as carbon skeleton and metal source. Tetracycline (TC) and copper (Cu2+) as target pollutants were used to investigate the adsorption properties of xFe@HCNs in single or binary TC and Cu2+ systems. The adsorption capacity sequence for TC among the adsorbents was (mmol·g-1): 2Fe@HCNs (0.088) > 8Fe@HCNs (0.061) > HCNs (0.054) > RC (0.036), and for Cu2+ was (mmol·g-1): 2Fe@HCNs (1.120) > 8Fe@HCNs (1.026) > RC (0.792) > HCNs (0.681). 2Fe@HCNs demonstrated notable affinity for adsorbing both TC and Cu2+. Additionally, the influence of hydrochemical factors (i.e., cation species, anion species, and pH) on the adsorption properties of 2Fe@HCNs. Combined with advanced oxidation technology, the regeneration methods of magnetic adsorbent were explored using oxidizing agents (e.g., H2O2 and peroxymonosulfate) as eluents which could increase the adsorption sites of magnetic carbon adsorbents during the regenerating process, which was the novelty of the study. Furthermore, the regeneration mechanisms of H2O2 as eluent were investigated. This study discussed the application and regeneration methods of magnetic adsorbents in water treatment, offering new insights into environmental remediation using magnetic materials.

Process and systematic study of gold recovery from flexible printed circuit boards (FPCBs) using a choline chloride-ethylene glycol system

The traditional hydrometallurgy technology has been widely used to recover precious metals from electronic waste. However, such aqueous recycling systems often employ toxic/harsh chemicals, which may cause serious environmental problems. Herein, an efficient and environment-friendly method using a deep eutectic solvent (DES) mixed system of choline chloride-ethylene glycol-CuCl2·2H2O is developed for gold (Au) recovery from flexible printed circuit boards (FPCBs). The Au leaching and precipitation efficiency can reach approximately 100 % and 95.3 %, respectively, under optimized conditions. Kinetic results show that the Au leaching process follows a nucleation model, which is controlled by chemical surface reactions with an apparent activation energy of 80.29 kJ/mol. The present recycling system has a much higher selectivity for Au than for other base metals; the two-step recovery rate of Au can reach over 95 %, whereas those of copper and nickel are < 2 %. Hydrogen nuclear magnetic resonance spectroscopy (HNMR) and density functional theory (DFT) analyses confirm the formation of intermolecular hydrogen bonds in the DES mixed system, which increase the system melting and boiling points and facilitate the Au leaching process. The Au leaching system can be reused for several times, with the leaching efficiency remaining > 97 % after five cycles. Moreover, ethylene glycol (EG) and choline chloride (ChCl) act as aprotic solvents as well as coordinate with metals, decreasing the redox potential to shift the equilibrium to the leaching side. Overall, this research provides a theoretical and a practical basis for the recovery of metals from FPCBs.

Unraveling Multicopper [Cu3] and [Cu6] Clusters with Rare μ3-Sulfato and Linear μ2-Oxido-Bridges as Potent Antibiofilm Agents against Multidrug-Resistant Staphylococcus aureus

In this research article, two multicopper [Cu3] and [Cu6] clusters, [Cu3(cpdp)(μ3-SO4)(Cl)(H2O)2]·3H2O (1) and [Cu6(cpdp)2(μ2-O)(Cl)2(H2O)4]·2Cl (2) (H3cpdp = N,N'-bis[2-carboxybenzomethyl]-N,N'-bis[2-pyridylmethyl]-1,3-diaminopropan-2-ol), have been explored as potent antibacterial and antibiofilm agents. Their molecular structures have been determined by a single-crystal X-ray diffraction study, and the compositions have been established by thermal and elemental analyses, including electrospray ionization mass spectrometry. Structural analysis shows that the metallic core of 1 is composed of a trinuclear [Cu3] assembly encapsulating a μ3-SO42- group, whereas the structure of 2 represents a hexanuclear [Cu6] assembly in which two trinuclear [Cu3] motifs are exclusively bridged by a linear μ2-O2- group. The most striking feature of the structure of 2 is the occurrence of an unusual linear oxido-bridge, with the Cu3-O6-Cu3' bridging angle being 180.00°. Whereas 1 can be viewed as an example of a copper(II)-based compound displaying a rare μ3:η1:η1:η1 bridging mode of the SO42- group, 2 is the first example of any copper(II)-based compound showing an unsupported linear Cu-O-Cu oxido-bridge. Employing variable-temperature SQUID magnetometry, the magnetic susceptibility data were measured and analyzed exemplarily for 1 in the temperature range of 2-300 K, revealing the occurrence of antiferromagnetic interactions among the paramagnetic copper centers. Both 1 and 2 exhibited potent antibacterial and antibiofilm activities against methicillin-resistant Staphylococcus aureus (MRSA BAA1717) and the clinically isolated culture of methicillin-resistant S. aureus (MRSA CI1). The mechanism of antibacterial and antibiofilm activities of these multicopper clusters was investigated by analyzing and determining the intracellular reactive oxygen species (ROS) generation, lipid peroxidation, microscopic observation of cell membrane disruption, membrane potential, and leakage of cellular components. Additionally, 1 and 2 showed a synergistic effect with commercially available antibiotics such as vancomycin with enhanced antibacterial activity. However, 1 possesses higher antibacterial, antibiofilm, and antivirulence actions, making it a potent therapeutic agent against both MRSA BAA1717 and MRSA CI1 strains.

Self-assembly of Copper Nanoclusters Using DNA Nanoribbon Templates for Sensitive Electrochemical Detection of H2O2 in Live Cells

The excessive secretion of H2O2 within cells is closely associated with cellular dysfunction. Therefore, high sensitivity in situ detection of H2O2 released from living cells was valuable in clinical diagnosis. In the present work, a novel electrochemical cells sensing platform by synthesizing copper nanoclusters (CuNCs) at room temperature based on DNA nanoribbon (DNR) as a template (DNR-CuNCs). The tight and ordered arrangement of nanostructured assemblies of DNR-CuNCs conferred the sensor with superior stability (45 days) and electrochemical performance. The MUC1 aptamer extending from the DNR template enabled the direct capture MCF-7 cells on electrode surface, this facilitated real-time monitoring of H2O2 release from stimulated MCF-7 cells. While the captured MCF-7 cells on the electrode surface significantly amplified the current signal of H2O2 release compared with the traditional electrochemical detection H2O2 released signal by MCF-7 cells in PBS solution. The approach provides an effective strategy for the design of versatile sensors and achieving monitored cell release of H2O2 in long time horizon (10 h). Thereby expanding the possibilities for detecting biomolecules from live cells in clinical diagnosis and biomedical applications.

Benign-by-design plant extract-mediated preparation of copper oxide nanoparticles for environmentally related applications

A facile, cost-competitive, scalable and novel synthetic approach is used to prepare copper oxide (CuO) nanoparticles (NPs) using Betel leaf (Piper betle) extracts as reducing, capping, and stabilizing agents. CuO-NPs were characterized using various analytical techniques, including Fourier-transform infrared (FTIR) spectroscopy, ultraviolet-visible (UV-Vis) spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), as well as photoluminescence (PL) measurements. The activity of CuO-NPs was investigated towards Congo red dye degradation, supercapacitor energy storage and antibacterial activity. A maximum of 89% photodegradation of Congo red dye (CR) was obtained. The nanoparticle modified electrode also exhibited a specific capacitance (Csp) of 179 Fg-1. Furthermore, the antibacterial potential of CuO NPs was evaluated against Bacillus subtilis and Pseudomonas aeruginosa, both strains displaying high antibacterial performance.

Green synthesis of nanocellulose supported cu-bionanocomposites and their profound applicability in the synthesis of amide derivatives and controlling of food-borne pathogens

Copper bionanocomposites (CBNCS) were synthesized using Ipomoea carnea- sourced nanocellulose as support via an eco-friendly and cost-effective method. X-ray Diffractometer (XRD) pattern of CBNCS confirmed the octahedral structure of Cu2O, the face-centered cubic (FCC) crystal structure of Cu(0). XRD also revealed the crystal lattice of cellulose II. Surface Electron Microscope (SEM) and Transmission Electron Microscope (TEM) revealed the uniform distribution of copper nanoparticles (Cu NPs) with an average size of 10 nm due to the presence of nanocellulose. X-ray photoelectron spectroscopy (XPS) provided information about the electronic, chemical state and elemental composition of CBNCS. Thermogravimetric Analysis (TGA) showed the thermal stability of CBNCS. CBNCS catalyzed the rearrangement of oximes to primary amides in a very mild condition with a high yield of up to 92 %. CBNCS effectively inhibited the growth of Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) with lower minimum inhibitory concentration MIC values. Antioxidant activity and electrical conductivity of CBNCS were also determined.

Copper(II) Complexes with 2,2':6',2″-Terpyridine Derivatives Displaying Dimeric Dichloro-μ-Bridged Crystal Structure: Biological Activities from 2D and 3D Tumor Spheroids to In Vivo Models

Eight 2,2':6',2″-terpyridines, substituted at the 4'-position with aromatic groups featuring variations in π-conjugation, ring size, heteroatoms, and methoxy groups, were employed to enhance the antiproliferative potential of [Cu2Cl2(R-terpy)2](PF6)2. Assessing the cytotoxicity in A2780 (ovarian carcinoma), HCT116 (colorectal carcinoma), and HCT116DoxR (colorectal carcinoma resistant to doxorubicin) and normal primary fibroblasts revealed that Cu(II) complexes with 4-quinolinyl, 4-methoxy-1-naphthyl, 2-furanyl, and 2-pyridynyl substituents showed superior therapeutic potential in HCT116DoxR cells with significantly reduced cytotoxicity in normal fibroblasts (42-129× lower). Besides their cytotoxicity, the Cu(II) complexes are able to increase intracellular ROS and interfere with cell cycle progression, leading to cell death by apoptosis and autophagy. Importantly, they demonstrated antimetastatic and antiangiogenic properties without in vivo toxicity. In accordance with their nuclear accumulation, the Cu(II) complexes are able to cleave pDNA and interact with bovine serum albumin, which is a good indication of their ability for internalization and transport toward tumor cells.

HYSCORE and QM/MM Studies of Second Sphere Variants of the Type 1 Copper Site in Azurin: Influence of Mutations on the Hyperfine Couplings of Remote Nitrogens

Secondary coordination sphere (SCS) interactions have been shown to play important roles in tuning reduction potentials and electron transfer (ET) properties of the Type 1 copper proteins, but the precise roles of these interactions are not fully understood. In this work, we examined the influence of F114P, F114N, and N47S mutations in the SCS on the electronic structure of the T1 copper center in azurin (Az) by studying the hyperfine couplings of (i) histidine remote Nε nitrogens and (ii) the amide Np using the two-dimensional (2D) pulsed electron paramagnetic resonance (EPR) technique HYSCORE (hyperfine sublevel correlation) combined with quantum mechanics/molecular mechanics (QM/MM) and DLPNO-CCSD calculations. Our data show that some components of hyperfine tensor and isotropic coupling in N47SAz and F114PAz (but not F114NAz) deviate by up to ∼±20% from WTAz, indicating that these mutations significantly influence the spin density distribution between the CuII site and coordinating ligands. Furthermore, our calculations support the assignment of Np to the backbone amide of residue 47 (both in Asn and Ser variants). Since the spin density distributions play an important role in tuning the covalency of the Cu-Scys bond of Type 1 copper center that has been shown to be crucial in controlling the reduction potentials, this study provides additional insights into the electron spin factor in tuning the reduction potentials and ET properties.

Developing a Copper(II) Isopropyl 2-Pyridyl Ketone Thiosemicarbazone Compound Based on the IB Subdomain of Human Serum Albumin-Indomethacin Complex: Inhibiting Tumor Growth by Remodeling the Tumor Microenvironment

To develop a next-generation metal agent and dual-agent multitargeted combination therapy, we developed a copper (Cu) compound based on the properties of the human serum albumin (HSA)-indomethacin (IND) complex to remodel the tumor microenvironment (TME). We optimized a series of Cu(II) isopropyl 2-pyridyl ketone thiosemicarbazone compounds to obtain a Cu(II) compound (C4) with significant cytotoxicity and then constructed an HSA-IND-C4 complex (HSA-IND-C4) delivery system. IND and C4 bind to the hydrophobic cavities of the IB and IIA domains of HSA, respectively. In vivo, the HSA-IND-C4 not only showed enhanced antitumor efficacy relative to C4 and C4 + IND but also improved their targeting ability and decreased their side effects. The antitumor mechanism of C4 + IND involved acting on the different components of the TME. IND inhibited tumor-related inflammation, while C4 not only induced apoptosis and autophagy of cancer cells but also inhibited tumor angiogenesis.

Ultralow Loading Copper-Intercalated MoO3 Nanobelts with High Activity against Antibiotic-Resistant Bacteria

In recent years, the infection rate of antibiotic resistance has been increasing year by year, and the prevalence of super bacteria has posed a great threat to human health. Therefore, there is an urgent need to find new antibiotic alternatives with long-term inhibitory activity against a broad spectrum of bacteria and microorganisms in order to avoid the proliferation of more multidrug-resistant (MDR) bacteria. The presence of natural van der Waals (vdW) gaps in layered materials allows them to be easily inserted by different guest species, providing an attractive strategy for optimizing their physicochemical properties and applications. Here, we have successfully constructed a copper-intercalated α-MoO3 nanobelt based on nanoenzymes, which is antibacterial through the synergistic effect of multiple enzymes. Compared with α-MoO3, MoO3-x/Cu nanobelts with a copper loading capacity of 2.11% possess enhanced peroxidase (POD) catalytic activity and glutathione (GSH) depletion, indicating that copper intercalation significantly improves the catalytic performance of the nanoenzymes. The MoO3-x/Cu nanobelts are effective in inducing POD and oxidase (OXD) and catalase (CAT) activities in the presence of H2O2 and O2, which resulted in the generation of large amounts of reactive oxygen species (ROS), which were effective in bacterial killing. Interestingly, MoO3-x/Cu nanobelts can serve as glutathione oxidase (GSHOx)-like nanoenzymes, which can deplete GSH in bacteria and thus significantly improve the bactericidal effect. The multienzyme-catalyzed synergistic antimicrobial strategy shows excellent antimicrobial efficiency against β-lactamase-producing Escherichia coli (ESBL-E. coli) and methicillin-resistant Staphylococcus aureus (MRSA). MoO3-x/Cu exhibits excellent spectral bactericidal properties at very low concentrations (20 μg mL-1). Our work highlights the wide range of antibacterial and anti-infective biological applications of copper-intercalated MoO3-x/Cu nanobelt catalysts.

Green synthesized Cu-doped CeO2nanoparticles for Congo red dye adsorption and antibacterial action

The removal of pollutants from water bodies is crucial for the well-being of humanity and is a topic of global research. Researchers have turned their attention to green synthesized nanoparticles for wastewater treatment due to their eco-friendly nature, biocompatibility, and cost-effectiveness. This work demonstrates the efficient removal of organic dye and both gram-positive and gram-negative bacteria from water bodies using copper-doped cerium oxide nanoparticles synthesized withMurraya Koenigiiextract. Characterized via various methods, the 15% copper doped cerium oxide nanoparticles (Cu 15% NPs) exhibited maximum Congo red dye adsorption (98% degradation in 35 min). Kinetic analysis favoured a pseudo-second-order model, indicating the chemical nature of adsorption. Equilibrium adsorption isotherms aligned with the Langmuir model, indicating homogenous monolayer dye adsorption on the doped adsorbent. The maximum uptake of adsorbate,Qmobtained from Langmuir model for Cu 15% NPs was 193 mg g-1. The study also showed enhanced antibacterial activity againstBacillus subtilis, Staphylococcus aureus, Escherichia coliandPseudomonas aeruginosafor Cu-doped ceria, attributed to generation of reactive oxygen species (ROS) induced by the redox cycling between Ce3+and Ce4+. This substantiated that the green synthesized copper doped cerium oxide nanoparticles are potential candidates for adsorptive removal of Congo red dye and as antibacterial agents.

A highly sensitive and selective rhodamine-semicarbazide based fluorescent sensor for Cu2+ detection in real water samples and fluorescence bioimaging in HepG2 cells

A colorimetric and fluorescent sensor, selective for Cu2+ ions, was synthesized in two steps using a rhodamine-based compound attached to the semicarbazide-picolylamine moiety (RBP). Spectroscopic measurements, including UV-Vis absorption and fluorescence emission, were conducted in the semi-aqueous medium containing acetonitrile/4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid, denoted as MeCN/HEPES buffer (2:8, v/v, pH 7.0). The sensor exhibited high selectivity towards Cu2+ ions compared to other cations and demonstrated remarkable sensitivity towards Cu2+ ions, with a limit of detection at the nanomolar level. The calculated transitions indicated a 1:1 stoichiometric binding of RBP to Cu2+ ions based on a 4-coordination mode involving additional chelation in the semi-aqueous medium. The sensing mechanism for the detection of Cu2+ ions was investigated using high-resolution mass spectroscopy. The sensor could be employed as a real-time chemosensor for monitoring Cu2+ ions. Furthermore, the sensor has the potential for utilization in the detection of Cu2+ ions in actual water samples with the high precision and accuracy, as indicated by the small relative standard derivation values. The 50th percentile cytotoxicity concentration of RBP was found to be 22.92 μM. Additionally, the fluorescence bioimaging capability of RBP was demonstrated for the detection of Cu2+ ions in human hepatocellular carcinoma (HepG2) cells.

Stabilization of a Cu-binding site by a highly conserved tryptophan residue

Copper serves as an essential cofactor for nearly all living organisms. There are still many gaps remaining in our knowledge of how Gram-positive bacteria import copper and maintain homeostasis. To obtain a better understanding of how these processes work, here we focus on the ycnKJI operon responsible for regulating copper levels in the Gram-positive bacterium Bacillus subtilis. This operon encodes three Cu-related proteins: a copper-dependent transcriptional repressor (YcnK), a putative copper importer (YcnJ), and a copper-binding protein of unknown function (YcnI). We previously found that YcnI's extracellular Domain of Unknown Function 1775 (DUF1775) houses a monohistidine brace motif that coordinates a single Cu(II) ion. The Cu(II) binding site includes a highly conserved tryptophan residue. Here, we investigate the role of that tryptophan and the ability of the protein to interact with other oxidation states of Cu. We find that YcnI exhibits strong preference for binding Cu in the oxidized Cu(II) state, and that the conserved tryptophan residue is not essential for the interaction. We determine the structure of a tryptophan variant to 1.95 Å resolution that indicates that the tryptophan is needed to stabilize the metal binding interaction, and find that this variant has weaker affinity for Cu(II) than the wild-type protein. Together, these data provide further insights into the DUF1775 domain family and reveal the role of the conserved tryptophan residue.

Copper ion incorporation in α-synuclein amyloids

Copper ion dys-homeostasis is linked to neurodegenerative diseases involving amyloid formation. Even if many amyloidogenic proteins can bind copper ions as monomers, little is known about copper interactions with the resulting amyloid fibers. Here, we investigate copper interactions with α-synuclein, the amyloid-forming protein in Parkinson's disease. Copper (Cu(II)) binds tightly to monomeric α-synuclein in vitro involving the N-terminal amine and the side chain of His50. Using purified protein and biophysical methods in vitro, we reveal that copper ions are readily incorporated into the formed amyloid fibers when present at the start of aggregation reactions, and the metal ions also bind if added to pre-formed amyloids. Efficient incorporation is observed for α-synuclein variants with perturbation of either one of the high-affinity monomer copper-binding residues (i.e., N-terminus or His50) whereas a variant with both N-terminal acetylation and His50 substituted with Ala does not incorporate any copper into the amyloids. Both the morphology of the resulting α-synuclein amyloids (amyloid fiber pitch, secondary structure, proteinase sensitivity) and the copper chemical properties (redox activity, chemical potential) are altered when copper is incorporated into amyloids. We speculate that copper chelation by α-synuclein amyloids contributes to the observed copper dys-homeostasis (e.g., reduced bioavailable levels) in Parkinson's disease patients. At the same time, amyloid-copper interactions may be protective to neuronal cells as they will shield aberrantly free copper ions from promotion of toxic reactive oxygen species.