Eco-friendly bacterial cellulose/MXene aerogel with excellent photothermal and electrothermal conversion capabilities for efficient separation of crude oil/seawater mixture

Developing novel absorbent materials targeting high-efficiency, low-energy-consumption, and environmental-friendly oil spill cleanup is still a global issue. Porous absorbents endowed with self-heating function are an attractive option because of that they are able to in-situ heat crude oil and dramatically reduce oil viscosity for efficient remediation. Herein, we facilely prepared an eco-friendly multifunctional bacterial cellulose/MXene aerogel (P-SBC/MXene aerogel) for rapid oil recovery. Thanks to excellent full solar spectrum absorption (average absorbance = 96.6 %), efficient photo-thermal conversion, and superior electrical conductivity (electrical resistance = 36 Ω), P-SBC/MXene aerogel exhibited outstanding photothermal and electrothermal capabilities. Its surface temperature could quickly reach 93 °C under 1.0 kW/m2 solar irradiation and 124 °C under 3.0 V voltage respectively, enabling effective heat transfer toward spilled oil. The produced heat significantly decreased crude oil viscosity, allowing P-SBC/MXene aerogel to rapidly absorb oil. By combining solar heating and Joule heating, P-SBC/MXene aerogel connected to a pump-assisted absorption device was capable of achieving all-weather crude oil removal from seawater (crude oil flux = 630 kg m-2 h-1). More notably, P-SBC/MXene aerogel showed splendid outdoor crude oil separation performance. Based on remarkable crude oil/seawater separation ability, the versatile aerogel provides a promising way to deal with large-area oil spills.

The orchestration of sustained drug delivery by bacterial cellulose/gelatin nanocomposites reinforced with carboxylic carbon nanotubes

Recently, modifying bacterial cellulose (BC) by compositing it with other nano-biomaterials has become inevitable to achieve its desired properties in drug delivery. To address this, our study endeavors to utilize an in-situ fabrication method for the creation of a multifunctional BC/gelatin (BC/Gel) platform reinforced with carboxylic multi-walled carbon nanotubes (cMWCNTs) as a sustainable delivery model of biomolecules. Incipiently, cMWCNTs were loaded with human serum albumin (HSA) as a drug model, with an optimized nanoparticle-to-protein ratio of 1:5 and loading efficiency of 90.0 ± 1.0 % before incorporation into BC/Gel hydrogels. By comparison, nanocomposition improved the surface area and overall porosity of BC/Gel up to 58.0 ± 1.3 m2/g and 85.5 ± 1.1 %, respectively. Likewise, significant wettability of 44.0 ± 0.1° and dramatic biodegradation rate of 36.9 ± 1.2 % were other exceptionally gained attributes. Meanwhile, with a Zero-order kinetic mechanism, CNT-HSA integration facilitated the controlled release of 56.0 ± 0.9 % HSA over 7 days. Drug-loaded nanocomposites showcased >70 % viability during in vitro cellular trials using Human Foreskin Fibroblasts (HFF). Overall, BC/Gel/CNT-HSA nanocomposite exhibited favorable cell behavior, devoid of cytotoxic manifestations. Consequently, this BC-based nanocomposite scaffold implicates the premiere capability in the sustained delivery of an extended range of protein biomolecules, offering a promising therapeutic avenue for bolstering tissue regeneration.

An antibacterial biologic patch based on bacterial cellulose for repair of infected hernias

Infection-associated complications and repair failures and antibiotic resistance have emerged as a formidable challenge in hernia repair surgery. Consequently, the development of antibiotic-free antibacterial patches for hernia repair has become an exigent clinical necessity. Herein, a GBC/Gel/LL37 biological patch (biopatch) with exceptional antibacterial properties is fabricated by grafting 2-Methacryloyloxyethyl trimethylammonium chloride (METAC), a unique quaternary ammonium salt with vinyl, onto bacterial cellulose (GBC), followed by compounding with gelatin (Gel) and LL37. The GBC/Gel/LL37 biopatch exhibits stable swelling capacity, remarkable mechanical properties, flexibility, and favorable biocompatibility. The synergistic effect of METAC and LL37 confers upon the GBC/Gel/LL37 biopatch excellent antibacterial efficacy against Staphylococcus aureus and Escherichia coli, effectively eliminating invading bacteria without the aid of exogenous antibiotics in vivo while significantly reducing local acute inflammation caused by infection. Furthermore, the practical efficacy of the GBC/Gel/LL37 biopatch is evaluated in an infected ventral hernia model, revealing that the GBC/Gel/LL37 biopatch can prevent the formation of visceral adhesions, facilitate the repair of infected ventral hernia, and effectively mitigate chronic inflammation. The prepared antibacterial GBC/Gel/LL37 biopatch is very effective in dealing with the risk of infection in hernia repair surgery and offers potential clinical opportunities for other soft injuries, exhibiting considerable clinical application prospects.

Characterization of active films based on chitosan/polyvinyl alcohol integrated with ginger essential oil-loaded bacterial cellulose and application in sea bass (Lateolabrax japonicas) packaging

The poor mechanical properties, low water-resistance, and limited antimicrobial activity of chitosan (CS)/polyvinyl alcohol (PVA) based film limited its application in aquatic product preservation. Herein, bacterial cellulose (BC) was used to load ginger essential oil (GEO). The effects of the addition of BC and different concentrations of GEO on the physicochemical and antimicrobial activities of films were systematically evaluated. Finally, the application of sea bass fillets was investigated. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction analysis (XRD) analysis indicated dense networks were formed, which was verified by enhanced physical properties. The mechanical properties, barrier properties, and antimicrobial activities enhanced as GEO concentration increased. CPB0.8 (0.8 % GEO) film had better tensile strength (TS) and barrier performance, improved the quality, and extended the shelf-life of sea bass for another 6 days at least. Overall, active films are potential packaging materials for aquatic products.

An antibacterial membrane based on Janus bacterial cellulose with nano-sized copper oxide through polydopamine conjugation for infectious wound healing

Bacterial cellulose (BC) produced by Acetobacter xylinum has great advantages in wound dressing. However, the structural limitation under static culture, and lack of antibacterial properties restrict its application, especially for infectious wound healing. The present study reported an original wound dressing, which was composed of a Janus BC membrane with antibacterial nano-sized copper oxide (CuO) through polydopamine (PDA) conjugation to promote wound healing under infectious condition. The finished product (CuO/PDA/BC membrane) exhibited favorable air permeability, high hydrophilicity and good mechanical properties, as well as strong antibacterial effects by the sustained release of CuO and photothermal effect of CuO/PDA. Furthermore, CuO/PDA/BC membrane inhibited inflammatory response and promoted wound healing in an infectious wound model in vivo. These results suggested that our CuO/PDA/BC membrane had great potential as wound dressing for infectious wound healing.

Chitosan particles embedded bacterial nanocellulose flat membrane for hemodialysis

The development of bio-based hemodialysis membranes continues to be a challenge. Bacterial nanocellulose (BNC) membranes show potential in hemodialysis but can hardly retain beneficial proteins. Here, chitosan particles/bacterial nanocellulose (CSP/BNC) membranes were designed to efficiently remove uremic toxins and retain beneficial proteins. First, CSPs were synthesized in situ within a BNC membrane by ionic gelation following negative pressure impregnation. Subsequently, these membranes were thoroughly characterized. Compared with the BNC membrane, the pore volume and pore size of the 3 % CSP/BNC membrane decreased by 42.2 % and 32.1 %, respectively. The increased 22.2 times of Young's modulus and 88.9 % of tensile strength in the 3 % CSP/BNC membrane confirmed enhanced mechanical property. The sieving coefficient of bovine serum albumin decreased to 0.05 ± 0.03 in the 3 % CSP/BNC membrane. Moreover, the CSP/BNC membrane exhibited good hemocompatibility and cytocompatibility. The simulated dialysis results showed that the 3 % CSP/BNC membrane exhibited high clearance of urea (16.37 %/cm2) and lysozyme (3.54 %/cm2), while efficiently retaining bovine serum albumin (98.04 %/cm2). This is the first demonstration of the construction of a BNC-based hemodialysis membrane with in situ CSP formation to effectively regulate the pore properties of the membrane, making the CSP/BNC membrane a promising candidate for hemodialysis applications.

Incorporating bioactive glass nanoparticles in silk fibroin/bacterial nanocellulose composite scaffolds improves their biological and osteogenic properties for bone tissue engineering applications

Blend polymers composed of natural polymers are a ubiquitous biomaterial class due to their suitable mechanical and biological characterization. In the present study, composite scaffolds based on bacterial cellulose (BC)/silk fibroin (SF) with bioactive glass nanoparticles (BGNPs) were developed to enhance osteogenesis in human adipose derived stem cells (hASCs). The scanning electron microscopy (SEM) results of BGNPs indicated a spherical morphology and size ranging from 15 to 30 nm. The presence of BC and BGNPs reduced the pore diameter of SF scaffolds to about 210 ± 10 μm and 205 ± 10 μm, respectively, while increasing their compressive strength and compressive modulus. FTIR analyses proved the presence of BGNPs, BC and SF in the scaffolds. Flow cytometry data confirmed the surface markers for hASCs. The results also showed that BC and BGNPs addition to BC/SF scaffolds decreased degradation and swelling rate. The gene expression (Runx2, alkaline phosphatase and osteocalcin) studies signified the osteogenic potential of BGNPs in BC/SF scaffolds on hASCs. Eventually, the increased cell adhesion, viability and differentiation in the BC/SF and BC/SF/BGNPs composite scaffolds drawn from MTT, SEM, Alizarin red staining and alkaline phosphatase activity confirmed that these scaffolds promise to serve as a therapeutic candidate for bone defects.

ECM-inspired calcium/zinc laden cellulose scaffold for enhanced bone regeneration

Cellulose-based polymer scaffolds are highly diverse for designing and fabricating artificial bone substitutes. However, realizing the multi-biological functions of cellulose-based scaffolds has long been challenging. In this work, inspired by the structure and function of the extracellular matrix (ECM) of bone, we developed a novel yet feasible strategy to prepare ECM-like scaffolds with hybrid calcium/zinc mineralization. The 3D porous structure was formed via selective oxidation and freeze drying of bacterial cellulose. Following the principle of electrostatic interaction, calcium/zinc hybrid hydroxyapatite nucleated, crystallized, and precipitated on the 3D scaffold in simulated physiological conditions, which was well confirmed by morphology and composition analysis. Compared with alternative scaffold cohorts, this hybrid ion-loaded cellulose scaffold exhibited a pronounced elevation in alkaline phosphatase (ALP) activity, osteogenic gene expression, and cranial defect regeneration. Notably, the hybrid ion-loaded cellulose scaffold effectively fostered an M2 macrophage milieu and had a strong immune effect in vivo. In summary, this study developed a hybrid multifunctional cellulose-based scaffold that appropriately simulates the ECM to regulate immunomodulatory and osteogenic differentiation, setting a measure for artificial bone substitutes.

In vitro degradation and antibacterial activity of bacterial cellulose deposited flax fabric reinforced with polylactic acid and polyhydroxybutyrate

The objective of this study was to prepare biocomposites through the solution casting method followed by compression moulding in which bacterial cellulose (BC) deposited flax fabric (FF) produced through fermentation is coated with minimal amount of polylactic acid (PLA) and polyhydroxybutyrate (PHB). Biocomposites incorporated with 60 % of PLA or PHB (% w/w) show enhanced tensile strength. Cross-sectional morphology showed good superficial interaction of these biopolymers with fibres of FF thereby filling up the gaps present between the fibres. The tensile strength of biocomposites at 60 % PLA and 60 % PHB improved from 37.97 MPa (i.e., BC deposited FF produced in presence of honey) to 67.17 MPa and 56.26 MPa, respectively. Further, 0.25 % of nalidixic acid (NA) (% w/w) and 6 % of oleic acid (OA) (% w/w) incorporation into the biocomposites imparted prolonged antibacterial activity against Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa. The in vitro cytotoxicity of biocomposites was determined using L929 mouse fibroblast cells. The 3-(4,5-cime- thylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide cytotoxicity tests showed that the PHB derived biocomposites along with antibacterial compounds in it were non-toxic. In vitro degradation of biocomposites was measured for up to 8 weeks in the mimicked physiological environment that showed a gradual rate of degradation over the period.

Development and performance evaluation of a novel elastic bacterial nanocellulose/polyurethane small caliber artificial blood vessels

There is an increasing demand for small-diameter blood vessels. Currently, there is no clinically available small-diameter artificial vessel. Bacterial nanocellulose (BNC) has vast potential for applications in artificial blood vessels due to its good biocompatibility. At the same time, medical polyurethane (PU) is a highly elastic polymer material widely used in artificial blood vessels. This study reports a composite small-diameter BNC/PU conduit using a non-solvent-induced phase separation method with the highly hydrophilic BNC tube as the skeleton and the hydrophobic polycarbonate PU as the filling material. The results revealed that the compliance and mechanical matching of BNC/PU tubes were higher than BNC tubes; the axial/radial mechanical strength, burst pressure, and suture strength were significantly improved; the blood compatibility and cell compatibility were also excellent. The molecular and subcutaneous embedding tests showed that the composite tubes had lighter inflammatory reactions. The results of the animal substitution experiments showed that the BNC/PU tubes kept blood flow unobstructed without tissue proliferation after implantation in rats for 9 months. Thus, the BNC/PU small-diameter vascular prosthesis had the potential for long-term patency and acted as an ideal material for small-diameter vessels.

Redox-active NiS@bacterial cellulose nanofiber composite separators with superior rate capability for lithium-ion batteries

Separator is an essential component of lithium-ion batteries (LIBs), which is placed between the electrodes to impede their electrical contact and provide the transport channels for lithium ions. Traditionally, the separator contributes the overall mass of LIBs, thereby reducing the gravimetric capacity of the devices. Herein, a dual-layer redox-active cellulose separator is designed and fabricated to enhance the electrochemical performances of LIBs by introducing NiS. The presented separator is composed of an insulating bacterial cellulose (BC) nanofiber layer and a conductive, and redox-active NiS@BC/carbon nanotubes layer. By using the NiS@BC separator, the discharge capacity of the LiFePO4//Li half battery is enhanced to 117 mAh g-1 at a current of 2C owing to the redox-activity of NiS. Moreover, the functional separator-electrode interface can facilitate the homogenous Li stripping/plating and depress the polarization upon the repeated stripping/plating process. Consequently, the battery containing the redox-active separator exhibits outstanding cycle stability and rate capability. The present study contributes a novel strategy for the developments of functional separators to improve the electrochemical properties of LIBs.

Functionalizable bacterial cellulose composite membrane for guided tissue regeneration

This research aims to develop guided tissue regeneration (GTR) membranes from bacterial cellulose (BC), a natural polysaccharide-based biopolymer. A double-layered BC composite membrane was prepared by coating the BC membrane with mixed carboxymethyl cellulose/poly(ethylene oxide) (CMC/PEO) fibers via electrospinning. The CMC/PEO-BC membranes were then characterized for their chemical and physical characteristics. The 8 % (wt/v) CMC/PEO (1:1) aqueous solution yielded well-defined electrospun CMC/PEO nanofibers (125 ± 10 nm) without beads. The CMC/PEO-BC membranes exhibited good mechanical and swelling properties as well as good cytocompatibility against human periodontal ligament cells (hPDLs). Its functionalizability via carboxyl entities in CMC was tested using the calcium-binding domain of plant-derived recombinant human osteopontin (p-rhOPN-C122). As evaluated by enzyme-linked immunosorbent assay, a 98-99 % immobilization efficiency was achieved in a concentration-dependent manner over an applied p-rhOPN-C122 concentration range of 7.5-30 ng/mL. The biological function of the membrane was assessed by determining the expression levels of osteogenic-related gene transcripts using quantitative real-time reverse-transcriptase polymerase chain reaction. Mineralization assay indicated that the p-rhOPN-C122 immobilized CMC/PEO-BC membrane promoted hPDLs osteogenic differentiation. These results suggested that the developed membrane could serve as a promising GTR membrane for application in bone tissue regeneration.

Highly sensitive humidity sensor based on composite film of partially reduced graphene oxide and bacterial cellulose

Breathing is an important physiological activity of human body, which not only reflects the state of human movement, but also is one of the important health indicators. Breathing can change the concentration of water molecules, so monitoring humidity has gradually become a hot topic in modern research. In this study, a humidity sensing composite film with high sensitivity and short response time was made by using the mixture of graphene oxide (GO) and bacterial cellulose (BC) with simple dry film-forming method. L-ascorbic acid was used as reducing agent to reduce GO and improve the conductivity of GO/BC composite film (BG). The influence of different BC contents and the different reduction degree on the resistance change rate of composite film was investigated in details. The maximum resistance change rate of partially reduced BG humidity sensitive composite film reached up to 94%, and the response and recovery time were 13 s and 47 s respectively. Furthermore, the sensor shows obvious resistance change in noncontact sensing test and different breathing states. This kind of humidity sensitive film with fast response and high sensitivity has great potential in human health monitoring and noncontact sensing, and is of great significance in promoting health detection and intelligent life.

Nanocomposite Based on Bacterial Cellulose and Silver Nanoparticles Improve Wound Healing Without Exhibiting Toxic Effect

Wound healing is an important and complex process, containing a multifaceted process governed by sequential yet overlapping phases. Certain treatments can optimize local physiological conditions and improve wound healing. Silver nanoparticles (AgNP) are widely known for their antimicrobial activity. On the other hand, bacterial cellulose (BC) films have been used as a dressing that temporarily substitutes the skin, offering many advantages in optimizing wound healing, in addition to being highly biocompatible. Considering the promising activities of AgNP and BC films, the present study aimed to evaluate the wound healing activity in Wistar Hannover rats using a nanocomposite based on bacterial cellulose containing AgNP (AgBC). In a period of 21 days, its influence on the wound area, microbial growth, histopathological parameters, and collagen content were analyzed. In addition, toxicity indicators were assessed, such as weight gain, water consumption, and creatinine and alanine transaminase levels. After 14 days of injury, the animals treated with AgBC showed a significant increase in wound contraction. The treatment with AgBC significantly reduced the number of microbial colonies compared to other treatments in the first 48 h after the injury. At the end of the 21 experimental days, an average wound contraction rate greater than 97 % in relation to the initial area was observed, in addition to a significant increase in the amount of collagen fibers at the edge of the wounds, lower scores of necrosis, angiogenesis and inflammation, associated with no systemic toxicity. Therefore, it is concluded that the combination of preexisting products to form a new nanocomposite based on BC and AgNP amplified the biological activity of these products, increasing the effectiveness of wound healing and minimizing possible toxic effects of silver.

Whole genome sequencing analysis of Komagataeibacter nataicola reveals its potential in food waste valorisation for cellulose production

BACKGROUND

Komagataeibacter nataicola (K. nataicola) is a gram-negative acetic acid bacterium that produces natural bacterial cellulose (BC) as a fermentation product under acidic conditions. The goal of this work was to study the complete genome of K. nataicola and gain insight into the functional genes in K. nataicola that are responsible for BC synthesis in acidic environments.

METHODS AND RESULT

The pure culture of K. nataicola was obtained from yeast-glucose-calcium carbonate (YGC) agar, followed by genomic DNA extraction, and subjected to whole genome sequencing on a Nanopore flongle flow cell. The genome of K. nataicola consists of a 3,767,936 bp chromosome with six contigs and 4,557 protein coding sequences. The maximum likelihood phylogenetic tree and average nucleotide identity analysis confirmed that the bacterial isolate was K. nataicola. The gene annotation via RAST server discovered the presence of cellulose synthase, along with three genes associated with lactate utilization and eight genes involved in lactate fermentation that could potentially contribute to the increase in acid concentration during BC synthesis.

CONCLUSION

A more comprehensive genome study of K. nataicola may shed light into biological pathway in BC productivity as well as benefit the analysis of metabolites generated and understanding of biological and chemical interactions in BC production later.

Investigation of anti-adherence and antimicrobial properties of prodigiosin-functionalized bacterial cellulose membrane for biomedical applications

In this study, novel biomaterial that consisted entirely of bacterial products was developed with the approach of designing cost effective material for biomedical applications. With this aim, bacterial cellulose membranes (BCMs) which synthesized by Komagataeibacter intermedius were produced. Moreover, to impart antimicrobial properties to enhance the capacity of BCMs for biomedical usage, prodigiosin (PG) pigment of Serratia marcescens which presents wide range of antimicrobial activities was loaded to BCMs. Firstly, high yield of PG production was achieved, and then crude pigment was purified with silica gel column. The purified PG was characterized with thin layer chromatography and UV-visible spectrometry. The antimicrobial effect of the produced pigment on Gram-positive and negative bacteria and a yeast was investigated. The success of modification in PG-modified BCMs has been demonstrated by FTIR and SEM. Moreover, antimicrobial and antiadhesive ability of novel PG-BCMs were examined with disc diffusion and plate counting methods. As a result, it was established that PG-BCMs were able to inhibit the growth of all tested microorganisms. Furthermore, excellent antiadhesive effect was observed for the tested microorganisms with the inhibition rates of 82.05-96.25 %. Finally, cytotoxicity test with L929 cell line demonstrated that PG-BCM is biocompatible at a level that can be applied in in vivo studies.

Exploring the biotic and abiotic drivers influencing nata de coco production by Komagataeibacter nataicola in pre-fermented coconut water

In China and Southeast Asia, pre-fermented coconut water is commonly used for the production of nata de coco, a jelly-like fermented food that consists of bacterial cellulose (BC). The inherent natural fermentation process of coconut water introduces uncontrollable variables, which can lead to unstable yields during BC production. This study involved the collection of spontaneously pre-fermented coconut water over a five-month production cycle. The aim was to evaluate the microbiota and metabolite profile, as well as determine its impact on BC synthesis by Komagataeibacter nataicola. Significant variations in the microbial community structure and metabolite profile of pre-fermented coconut water were observed across different production months, these variations had significant effects on BC synthesis by K. nataicola. A total of 52 different bacterial genera and 32 different fungal genera were identified as potential biotic factors that can influence BC production. Additionally, several abiotic factors, including lactate (VIP = 4.92), mannitol (VIP = 4.22), ethanol (VIP = 2.67), and ascorbate (VIP = 1.61), were found to be potential driving forces affecting BC synthesis by K. nataicola. Upon further analysis, the correlation network indicated that 14 biotic factors had a significant contribution to BC production in three strains of K. nataicola. These factors included 8 bacterial genera, such as Limosilactobacillus and Lactiplantibacillus, and 6 fungal genera, such as Meyerozyma and Ogataea. The abiotic factors lactate, mannitol, and ethanol showed a positive correlation with the BC yield. This study provides significant insights into controlling the fermentation processes of pre-fermented coconut water in industrial settings.

Study on application of biocellulose-based material for cheese packaging

Bacterial cellulose (BC, biocellulose) is a natural polymer of microbiological origin that meets the criteria of a biomaterial for food packaging. The aim of the research was to obtain biocellulose and test its chemical as well as physical characterization as a potential packaging for Dutch-type cheeses. Four variants of biocellulose-based material were obtained: not grinded and grinded variants obtained from YPM medium (YPM-BCNG and YPM-BCG, respectively) and not grinded and grinded variants from acid whey (AW) (AW-BCNG and AW-BCG, respectively). It was demonstrated that AW-BCNG exhibited the highest thermostability and the highest degradation temperature (348 °C). YPM-BCG and YPM-BCNG demonstrated higher sorption properties (approx. 40 %) compared to AW-BCG and AW-BCNG (approx. 15 %). Cheese packaged in biocellulose (except for YPM-BCNG) did not differ in water, fat, or protein content compared to the control cheese. All of the biocellulose packaging variants provided the cheeses with protection against unfavourable microflora. It was demonstrated that cheeses packaged in biocellulose were characterized by lower hardness, fracturability, gumminess, and chewiness than the control cheese sample. The results obtained indicate that BC may be a suitable packaging material for ripening cheeses, which shows a positive impact on selected product features.

Using bacterial cellulose to bridge covalent and physical crosslinks in hydrogels for fabricating multimodal sensors

Network optimization is vital for the polysaccharide based hydrogels with multiple crosslinks. In this study, we developed a 'two-step' strategy to activate synergistic effect of chemical and physical crosslinks using a poly (vinyl alcohol) (PVA)/bacterial cellulose (BC) hydrogel as a template. The BC nanofibers, on the one hand, acted as nucleating agents, participating in the crystallization of PVA, and on the other hand, were also involved in the formation of boronic ester bond, anchored with the PVA chains via chemical bonding. Therefore, the existence of BC nanofibers, as 'bridge', linked the crystalline regions and amorphous parts of PVA together, associating the two characteristic crosslinks, which was conducive to load transfer. The mechanical properties of resultant hydrogels, including the tensile elongation and strength, as well as fracture toughness, were significantly improved. Moreover, the dually cross-linked hydrogels possessed ionic conductivity, which was sensitive to the tensile deformation and environmental temperature. This study clarifies a unique role of BC nanofibers in hydrogels, and proposes an effective approach to construct multiple networks in the nanocellulose reinforced PVA hydrogels.

Nanocellulose-based membranes with pH- and temperature-responsive pore size for selective separation

Smart gating membranes have drawn much attention due to the controllable pore structure. Herein, a smart gating membrane with dual responsiveness was prepared from bacteria cellulose (BC) grafted with pH- and temperature-responsive polymers. By external stimulation, the average pore size of the membrane can be controlled from 33.75 nm to 144.81 nm, and the pure water flux can be regulated from 342 to 2118 L·m-2·h-1 with remarkable variation in the pH range of 1-11 and temperature range of 20-60 °C. The adjustability of pore size is able to achieve the gradient selective separation of particles and polymers with different sizes. In addition, owing to the underwater superoleophobicity and the nanoscale pore structure, the membrane separation efficiencies of emulsified oils are higher than 99 %. Moreover, the controllable pore size endows the membrane with good self-cleaning performance. This nanocellulose-based smart gating membrane has potential applications in the fields of controllable permeation, selective separation, fluid transport, and drug/chemical controlled release systems.

Bacterial cellulose/multi-walled carbon nanotube composite films for moist-electric energy harvesting

Generation of renewable and clean electricity energy from ubiquitous moisture for the power supply of portable electronic devices has become one of the most promising energy collection methods. However, the modest electrical output and transient power supply characteristics of existing moist-electric generator (MEG) severely limit its commercial application, leading to an urgent demand of developing a MEG with high electrical output and continuous power generation capacity. In this work, it is demonstrated that a flexible bacterial cellulose (BC)/Multi-walled carbon nanotube (MWCNT) double-layer (BM-dl) film prepared by vacuum filtration can maintain the moisture concentration difference in the film MEG. Unlike previous studies on cellulose based MEG, BM-dl film has a heterogeneous structure, resulting in a maximum output power density of 0.163 μW/cm2, an extreme voltage of 0.84 V, and current of 2.21 μA at RH = 90 %. BM-dl MEG can generate a voltage of 0.55 V continuously for 45 h in a natural environment (RH = 63-77 %, T = 26-27 °C), which is in a leading level among existing reported cellulose-based MEGs. In summary, this study provides new ideas for innovative design of MEG, which is highly competitive in terms of energy supply for the Internet of Things and wearable devices.

Effect of TEMPO-oxidized bacterial cellulose nanofibers stabilized Pickering emulsion of cinnamon essential oil on structure and properties of gelatin composite films

Pure gelatin film often exhibits high hydrophilicity and a lack of antibacterial activity, hindering its practical application in the field of food preservation. To address these issues, we incorporated 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-oxidized bacterial cellulose (TOBC) nanofibers stabilized cinnamon essential oil (CEO) Pickering emulsions into the gelatin matrix to develop active food packaging films. The study revealed that the good distribution of emulsion droplets in the film matrix. While with increasing Pickering emulsion proportion, the microstructures of composite films were more heterogeneous, showing some pores or cavities. In addition, the insertion of TOBC-stabilized CEO emulsions could improve the elongation at break (EAB), water-resistance, UV blocking ability, and antibacterial activity of film, but reduced its tensile strength (TS) and water vapor barrier properties (WVP). Notably, the film prepared with 4 % TOBC-stabilized CEO Pickering emulsion demonstrated enhanced preservation of strawberries. Overall, the as-prepared gelatin-based active composite films have considerable potential for food packaging.

Assessment of Culture Systems to Produce Bacterial Cellulose with a Kombucha Consortium

Bacterial cellulose (BC) is an emerging material for high-end applications due to its biocompatibility and physicochemical characteristics. However, the scale-up production of this material is still expensive, with the culture medium constituting one-third of the total cost. Herein, four different media (yeast nitrogen base, YNB; Murashige and Skoog, MSO; black tea; and NPK fertilizer solution) were compared while using sucrose as an additional carbon source. The yields of BC were best for YNB and fertilizer with 0.37 and 0.34 gBC/gC respectively. These two were then compared using glucose as a carbon source, with improvements in the production of 29% for the fertilizer, while only an 8% increase for YNB was seen; however, as the carbon concentration increased with a fixed N concentration, the yield was lower but the rate of production of BC increased. The obtained BC films were sanitized and showed low molecular weight and all the expected cellulose characteristic FT-IR bands while SEM showed nanofibers around 0.1 μm. Compared to traditional methods for lab-scale production, the use of the fertilizer and the consortium represent benefits compared to traditional lab-scale BC culture methods such as a competitive cost (two times lower) while posing resilience and tolerance to stress conditions given that it is produced by microbial communities and not with a single strain. Additionally, the low molecular weight of the films could be of interest for certain coating formulations.

Functionalization of bacterial cellulose: Exploring diverse applications and biomedical innovations: A review

The demand for the functionalization of additive materials based on bacterial cellulose (BC) is currently high due to their potential applications across various sectors. The preparation of BC-based additive materials typically involves two approaches: in situ and ex situ. In situ modifications entail the incorporation of additive materials, such as soluble and dispersed substances, which are non-toxic and not essential for bacterial cell growth during the production process. However, these materials can impact the yield and self-assembly of BC. In contrast, ex situ modification occurs subsequent to the formation of BC, where the additive materials are not only adsorbed on the surface but also impregnated into the BC pellicle, while the BC slurry was homogenized with other additive materials and gelling agents to create composite films using the casting method. This review will primarily focus on the in situ and ex situ functionalization of BC then sheds light on the pivotal role of functionalized BC in advancing biomedical technologies, wound healing, tissue engineering, drug delivery, bone regeneration, and biosensors.

Metal-organic framework derived transition metal sulfides grown on carbon nanofibers as self-supported catalysts for hydrogen evolution reaction

Metal-organic framework (MOF) derived transition metal-based electrocatalysts have received great attention as substitutes for noble metal-based hydrogen evolution catalysts. However, the low conductivity and easy detachments from electrodes of raw MOF have seriously hindered their applications in hydrogen evolution reaction. Herein, we report the facile preparation of Co-NSC@CBC84, a porous carbon-based and self-supported catalyst containing Co9S8 active species, by pyrolysis and sulfidation of in-situ grown ZIF-67 on polydopamine-modified biomass bacterial cellulose (PDA/BC). As a binder-free and self-supported electrocatalyst, Co-NSC@CBC84 exhibits superior electrocatalytic properties to other reported cobalt-based sulfide catalytic materials and has good stability in 0.5 M H2SO4 electrolyte. At the current density of 10 mA cm-2, only an overpotential of 138 mV was required, corresponding to a Tafel slope of 123 mV dec-1, owing to the strong synergy effect between Co-NSC nanoparticles and CBC substrate. This work therefore provides a feasible approach to prepare self-supported transition metal sulfides as HER catalysts, which is helpful for the development of noble metal-free catalysts and biomass carbon materials.

Biodegradable poly(ethylene glycol-glycerol-itaconate-sebacate) copolyester elastomer with significantly reinforced mechanical properties by in-situ construction of bacterial cellulose interpenetrating network

To address the concern that biodegradable elastomers are environmental-friendly but usually associated with poor properties for practical utilization, we report a star-crosslinked poly(ethylene glycol-glycerol-itaconate-sebacate) (PEGIS) elastomer synthesized by esterification, polycondensation and UV curing, and reinforced by bacterial cellulose (BC). The interpenetrating network of primary BC backbone and vulcanized elastomer is achieved by the "in-situ secondary network construction" strategy. With the well dispersion of BC without agglomeration, the mechanical properties of PEGIS are significantly enhanced in tensile strength, Young's modulus and elongation at break. The reinforcement strategy is demonstrated to be efficient and offers a route to the development of biodegradable elastomers for a variety of applications in the future.

[New Advances in the Application of Bacterial Cellulose Composite Materials in the Field of Bone Tissue Engineering]

Bacterial cellulose (BC) is a type of extracellular polymeric nanomaterial secreted by microorganisms over the course of their growth. It has gained significant attention in the field of bone tissue engineering due to its unique structure of three-dimensional fibrous network, excellent biocompatibility, biodegradability, and exceptional mechanical properties. Nevertheless, BC still has some weaknesses, including low osteogenic activity, a lack of antimicrobial properties, small pore size, issues with the degradation rate, and a mismatch in bone tissue regeneration, limiting its standalone use in the field of bone tissue engineering. Therefore, the modification of BC and the preparation of BC composite materials have become a recent research focus. Herein, we summarized the relationships between the production, modification, and bone repair applications of BC. We introduced the methods for the preparation and the modification of BC. Additionally, we elaborated on the new advances in the application of BC composite materials in the field of bone tissue engineering. We also highlighted the existing challenges and future prospects of BC composite materials.

Tannin Removal of Cashew Apple Juice by Powdered Gelatin Treatment and Its Utilization in Bacterial Cellulose Production

In this study, cashew apple juice was treated with different levels of powdered gelatin (2%, 5%, and 10%) to remove tannins. The results showed that the addition of 5% gelatin removed 99.2% of condensed tannins while did not affect reducing sugars of juice. Subsequently, tannin-free cashew apple juice (CA) was aerobically fermented for 14 days with Komagataeibacter saccharivorans strain 1.1 (KS) and Gluconacetobacter entanii HWW100 (GE) in comparison with Hestrin-Schramm (HS) medium as control. The dry weight of bacterial cellulose (BC) obtained from the KS strain (2.12 and 1.48 g/L for CA and HS media, respectively) was higher than that from the GE strain (0.69 and 1.21 g/L for CA and HS media, respectively). Although GE showed low BC production yield, its viability in both media after 14-day fermentation was notable (6.06-7.21 log CFU/mL) compared to KS strain (1.90-3.30 log CFU/mL). In addition, the XRD and FT-IR analysis showed that there was no significant difference in the crystallinity and functional groups of BC films when cultured on CA and HS medium, while the morphology by SEM exhibited the phenolic molecules on the film surface. Cashew apple juice has been shown to be a viable and cost-effective medium for the BC production.

Enhanced bacterial cellulose production in Gluconacetobacter xylinus by overexpression of two genes (bscC and bcsD) and a modified static culture

Bacterial cellulose (BC), a nanostructured material, is renowned for its excellent properties. However, its production by bacteria is costly due to low medium utilization and conversion rates. To enhance the yield of BC, this study aimed to increase BC yield through genetic modification, specifically by overexpressing bcsC and bcsD in Gluconacetobacter xylinus, and by developing a modified culture method to reduce medium viscosity by adding water during fermentation. As a result, BC yields of 5.4, 6.2, and 6.8 g/L were achieved from strains overexpressing genes bcsC, bcsD, and bcsCD, significantly surpassing the yield of 2.2 g/L from wild-type (WT) strains. In the modified culture, the BC yields of all four strains increased by >1 g/L with the addition of 20 mL of water during fermentation. Upon comparing the properties of BC, minimal differences were observed between the WT and pbcsC strains, as well as between the static and modified cultures. In contrast, BC produced by strains overexpressing bcsD had a denser microstructural network and exhibited demonstrated higher tensile strength and elongation-to-break. Compared to WT, BC from bcsD overexpressed strains also displayed enhanced crystallinity, higher degree of polymerization and improved thermal stability.

Fluorescent bacterial cellulose@Zr-MOF via in-situ synthesis for efficient enrichment and sensitive detection of Cr(VI)

In this study, for the first time, a new Zr-metal-organic framework (MOF) with strong aggregation-induced emission was successfully grown on bacterial cellulose (BC) using an in situ synthesis method, yielding the fluorescent composite nanofiber BC@Zr-MOF. The BC with abundant hydroxyl groups, which can be uniformly wrapped in the interior of the MOF layer to form BC@Zr-MOF, was used as the growth template. The resulting composite nanofibers had a higher specific surface area (1, 116 m2/g), stronger fluorescence emission and better pH stability than MOF particles. In addition, BC@Zr-MOF exhibited selective recognition and enrichment of Cr2O72- in the aqueous phase and a high adsorption capacity of 90 mg/g. Moreover, because of the high aspect ratio and good tensile strength (6.73 N/mm2), BC@Zr-MOF nanofibers could be readily made into freestanding nanopapers via vacuum filtration, thus solving the molding and recycling problems of MOFs. The facilely prepared test paper could rapidly, sensitively and selectively detect Cr2O72- with the limit of detection (LOD) of 41.8 nM, which is nearly 500 times lower than that of the national drinking water standard. Moreover, the LOD of BC@Zr-MOF nanopapers, when used in combination with circulating filtration, decreases to 6.9 nM owing to the adsorption-enrichment effect.

Preparation and characterization of Arenga pinnata thermoplastic starch/bacterial cellulose nanofiber biocomposites via in-situ twin screw extrusion

Thermoplastic starch (TPS) is considered as alternative material for substitute petroleum-based materials for single-use packaging material applications. The main weakness of TPS is sensitive to water and humidity which causes low mechanical properties and low thermal resistance. To address this limitation, one can enhance the strength is by incorporating cellulose nanofiber as a reinforcing agent. Cellulose nanofiber used in this study is bacterial cellulose, synthesized from tapioca liquid waste media, namely Nata de Cassava (NDCass). The effect of NDCass addition to TPS on chemical characteristics, physical properties, crystallinity, mechanical properties, and thermal properties was investigated. As the results, NDCass incorporation has no significant effect on the chemical structure and crystal structure of composites as observed by FTIR and XRD analysis. Incorporating of NDCass improved the mechanical properties by 37.3 %, the thermal stability, and the viscosity, however reduced the elongation at break by 65.6 %, the density, the melt flow and shear rate of TPS biocomposite. This study evidently that starch from Arenga pinnata trunk and bacterial cellulose from tapioca liquid waste can be manufactured into biocomposites using in-situ twin screw extrusion which beneficial for large-scale applications.

Identification of Gluconacetobacter xylinus LYP25 and application to bacterial cellulose production in biomass hydrolysate with acetic acid

Bacterial cellulose (BC) is a remarkable biomacromolecule with potential applications in food, biomedical, and other industries. However, the low economic feasibility of BC production processes hinders its industrialization. In our previous work, we obtained candidate strains with improved BC production through random mutations in Gluconacetobacter. In this study, the molecular identification of LYP25 strain with significantly improved productivity, the development of chestnut pericarp (CP) hydrolysate medium, and its application in BC fermentation were performed for cost-effective BC production process. As a result, the mutant strain was identified as Gluconacetobacter xylinus. The CP hydrolysate (CPH) medium contained 30 g/L glucose with 0.4 g/L acetic acid, whereas other candidates known to inhibit fermentation were not detected. Although acetic acid is generally known as a fermentation inhibitor, it improves the BC production by G. xylinus when present within about 5 g/L in the medium. Fermentation of G. xylinus LYP25 in CPH medium resulted in 17.3 g/L BC, a 33 % improvement in production compared to the control medium, and BC from the experimental and control groups had similar physicochemical properties. Finally, the overall process of BC production from biomass was evaluated and our proposed platform showed the highest yield (17.9 g BC/100 g biomass).

Bacterial nanocellulose membrane with opposite surface charges for large-scale and large-area osmotic energy harvesting and ion transport

How to optimize ion-exchange membrane materials has been the key for researchers recently working on the use of reverse electrodialysis to harvest osmotic energy. Based on the considerations of improving membrane performance and conversion to large-area industrial production, this work first proposes an easy-industrialized strategy to treat bacterial cellulose membranes by hot pressing and hot pressing with etherification modification, and then to obtain anion-selective and cation-selective membrane pairs (PBC-M and NBC-M) with opposite charges. The PBC-M obtained by multi-step treatment has excellent hydrophobicity, good surface charge density, and more favorable nanochannel size for the functioning of double layer. The maximum output power density of 44.1 mW m-2 was obtained in artificial river water and seawater simulated salinity gradient power generation. Applied to a larger test area, the power output of the system where a single membrane is located can reach 2.2 × 10-3 mW, which is ahead of similar experimental products. The two membranes prepared can also be used in combination, which provides a new idea for full cell design. It's important to open up a new route for optimizing nanofluidic channel design, regulating ion flux transport, and advancing the large-scale industrialization of biomass nanofluidic membrane RED system.

Superelastic and superflexible cellulose aerogels for thermal insulation and oil/water separation

Aerogels with low thermal conductivity and high adsorption capacity present a promising solution to curb water pollution caused by organic reagents as well as mitigate heat loss. Although aerogels exhibiting good adsorption capacity and thermal insulation have been reported, materials with mechanical integrity, high flexibility and shear resistance still pose a formidable task. Here, we produced bacterial cellulose-based ultralight multifunctional hybrid aerogels by using freeze-drying followed by chemical vapor deposition silylation method. The hybrid aerogels displayed a low density of 10-15 mg/cm3, high porosity exceeding 99.1 %, low thermal conductivity (27.3-29.2 mW/m.K) and superior hydrophobicity (water contact angle>120o). They also exhibited excellent mechanical properties including superelasticity, high flexibility and shear resistance. The hybrid aerogels demonstrated high heat shielding efficiency when used as an insulating material. As a selective oil absorbent, the hybrid aerogels exhibit a maximum adsorption capacity of up to approximately 156 times its own weight and excellent recoverability. Especially, the aerogel's highly accessible porous microstructure results in an impressive flux rate of up to 162 L/h.g when used as a filter in a continuous oil-water separator to isolate n-hexane-water mixtures. This work presents a novel endeavor to create high-performance, sustainable, reusable, and adaptable multifunctional aerogels.

Response surface methodology for optimization of nitrocellulose preparation from nata de coco bacterial cellulose for propellant formulation

Nitrocellulose (NC) has garnered significant interest among researchers due to its versatile applications, contingent upon the degree of nitration that modifies the cellulose structure. For instance, NC with a high nitrogen content, exceeding 12.5%, finds utility as a key ingredient in propellant formulations, while variants with lower nitrogen content prove suitable for a range of other applications, including the formulation of printing inks, varnishes, and coatings. This communication aims to present the outcomes of our efforts to optimize the nitration reaction of bacterial cellulose to produce high-nitrogen-content NC, employing the response surface methodology (RSM). Our investigation delves into the influence of the mole ratio of sulfuric and nitric acids, reaction temperature, and nitration duration on the nitrogen content of the resultant products. Utilizing a central composite design (CCD), we identified the optimal conditions for NC synthesis. Analysis of variance (ANOVA) underscored the substantial impact of these reaction conditions on the percentage of nitrogen content (%N) yield. By implementing the predicted optimal conditions-namely, a H2SO4:HNO3 mole ratio of 3:1, a reaction temperature of 35 °C, and a reaction period of 22 min-we successfully produced NC with a nitrogen content of 12.64%. Characterization of these products encompassed elemental analysis, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), thermal gravimetric analysis (TGA), and field emission scanning electron microscopy (FESEM).

Enhanced bacterial cellulose production in Komagataeibacter sucrofermentans: impact of different PQQ-dependent dehydrogenase knockouts and ethanol supplementation

BACKGROUND

Bacterial cellulose (BC) is a biocompatible material with unique mechanical properties, thus holding a significant industrial potential. Despite many acetic acid bacteria (AAB) being BC overproducers, cost-effective production remains a challenge. The role of pyrroloquinoline quinone (PQQ)-dependent membrane dehydrogenases (mDH) is crucial in the metabolism of AAB since it links substrate incomplete oxidation in the periplasm to energy generation. Specifically, glucose oxidation to gluconic acid substantially lowers environmental pH and hinders BC production. Conversely, ethanol supplementation is known to enhance BC yields in Komagataeibacter spp. by promoting efficient glucose utilization.

RESULTS

K. sucrofermentans ATCC 700178 was engineered, knocking out the four PQQ-mDHs, to assess their impact on BC production. The strain KS003, lacking PQQ-dependent glucose dehydrogenase (PQQ-GDH), did not produce gluconic acid and exhibited a 5.77-fold increase in BC production with glucose as the sole carbon source, and a 2.26-fold increase under optimal ethanol supplementation conditions. In contrast, the strain KS004, deficient in the PQQ-dependent alcohol dehydrogenase (PQQ-ADH), showed no significant change in BC yield in the single carbon source experiment but showed a restrained benefit from ethanol supplementation.

CONCLUSIONS

The results underscore the critical influence of PQQ-GDH and PQQ-ADH and clarify the effect of ethanol supplementation on BC production in K. sucrofermentans ATCC 700178. This study provides a foundation for further metabolic pathway optimization, emphasizing the importance of diauxic ethanol metabolism for high BC production.

Robust integration of light-driven carbon quantum dots with bacterial cellulose enables excellent mechanical and antibacterial biodegradable yarn

Due to the overuse of antimicrobial drugs, bacterial resistance became an urgent problem to be solved. In this study, carbon quantum dots (CQDs) with high photodynamic antibacterial activity were synthesized by a one-pot hydrothermal method and introduced into bacterial cellulose (BC) dispersion solution. Through a wet-spinning and wet-twisting processing strategy, bionic ordering nanocomposite macrofiber (BC/CQDs-based yarn) based on BC were obtained. The results showed that BC/CQDs-based yarn had excellent tensile strength (226.8 MPa) and elongation (22.2 %). Utilizing the light-driven generation of singlet oxygen (1O2) and hydroxyl radical (·OH), BC/CQDs-based yarn demonstrated remarkable antibacterial efficacy, with 99.9999 % (6 log, P < 0.0001) and 96.54 % (1.46 log, P < 0.0004) effectiveness against E. coli and S. aureus, respectively. At the same time, BC/CQDs-based yarn also displayed the characteristics of photothermal, fluorescent, and biodegradability. In summary, the application potential of BC/CQDs-based yarn is significant, opening up a new strategy for the development of sustainable green weaving and bio-based multi-function yarn.

Bacterial cellulose/gelatin-based pH-responsive functional film for food freshness monitoring

Food safety is related to public health and environmental safety. Therefore, it is necessary to develop accurate and effective detection methods to assess food quality and safety. In this study, a pH-responsive functional film (BC/GA/FITC/PCA) was generated for the real-time and visual monitoring of shrimp freshness. Bacterial cellulose /Gelatin (BC/GA) was used as a film-forming matrix, and fluorescein isothiocyanate (FITC) and red cabbage (PCA) were used as the response signals. The addition of FITC and PCA increased the shading capacity (< 30 %) and antioxidant properties (22.8 %) of the films. WCA (82.73 ± 0.95°), WVP (1.48 × 10-11 g·cm/cm2·s·Pa) and OTR (2.42 × 10-15 cm3·cm/cm2·s·Pa) indicated that the film possessed water resistance and oxygen barrier properties. When exposed to daylight, the film underwent a color transition from purple to green as the ammonia concentration increased. In addition, the blue-green fluorescence of the films gradually increased and the detection limit was low (170 ppb). In particular, the change in film color caused by shrimp spoilage corresponded to the TVBN value. This study work provides a new strategy for controlling and monitoring food safety and has a wide range of applications in the fields of food-active packaging and smart packaging.

NIR-triggered bacterial cellulose-based wound dressings for multiple synergistic therapy of infected wound

Skin wounds are repaired by a complex series of events and overlapping phases in which bacterial infection and insufficient angiogenesis at the wound site delay the healing process. Thus, functional wound dressings with enhanced antibacterial activity and angiogenic capacity have attracted attention. Herein, bacterial cellulose (BC)-based dressings were successfully fabricated by functionalization with a polydopamine (PDA) coating and copper sulfide nanoparticles (CuS NPs). Under 808 nm laser illumination, the BC/PDA/CuS composite membranes exhibited outstanding adjustable photothermal and photodynamic activities as well as controlled Cu2+ release, endowing the composite membranes with synergetic antibacterial activity. Specially, a bactericidal efficiency of 99.7 % and 88.0 % for Staphylococcus aureus and Escherichia coli was achieved after treatment with BC/PDA/CuS5 sample under NIR irradiation (0.8 W/cm2, 10 min), respectively. Moreover, the BC/PDA/CuS5 composite membrane could enhance the angiogenesis due to the released Cu2+. In vivo experiments revealed that the BC/PDA/CuS5 composite membrane dressing could accelerate the wound closure process of the full-thickness skin defects with S. aureus by synergistically reducing inflammation, enhancing collagen deposition, and promoting vascularization under NIR irradiation. Additionally, the BC/PDA/CuS5 composite membrane exhibited high biocompatibility and biosafety. This work offers a new strategy to prepare multifunctional BC-based dressing for clinical wound healing.

An overview of bio-cellulose derived materials for catalytic water treatment

Bio-cellulose derived materials (BCM) exhibit distinct structural and morphologic properties, which make them suitable for catalytic environmental remediation. In the domain of water treatment, the prospects for BCM remain bright, offering new possibilities for the development of advanced materials with low environmental impact. Research on BCM as catalysts or catalyst immobilization platforms for water treatment is still limited, mostly using laboratory-grown biomaterials for the photocatalytic degradation of dyes. BCM production costs can be significant, which can hinder its application. Thus, cost-effective alternatives using waste materials as substrates for BCM culture media are highly desirable to optimize production, while also decreasing food waste. Moreover, advances in biotechnology can enhance BCM production, tailoring its properties to meet specific requirements. Hybrid catalytic BCM composites can be easily developed, due to the straightforward functionalization of the biomaterial's network, promoting the efficiency of a variety of catalytic systems. Still considering the intrinsic features of the biomaterial, membrane development and application pose as an opportunity for continuous flow evaluations, facilitating long-term usage and reusability. Nevertheless, there are still challenges regarding catalytic BCM for water treatment (i.e., cost-effectiveness, scaling up, and consistent performance in diverse treatment scenarios). Addressing these aspects can lead to innovative environmental remediation options.

lactis

By employing co-cultivation technique on Komagataeibacter xylinum and Lactococcus lactis subsp. lactis, bacterial cellulose (BC)/nisin films with improved antibacterial activity and mechanical properties were successfully produced. The findings demonstrated that increased nisin production is associated with an upregulation of gene expression. Furthermore, results from Scanning electronic microscopy (SEM), Fourier transform infrared (FTIR), X-ray diffraction (XRD), and Thermogravimetric analysis (TG) confirmed the integration of nisin within BC. While being biocompatible with human cells, the BC/nisin composites exhibited antimicrobial activity. Moreover, mechanical property analyses showed a noticeable improvement in Young's modulus, tensile strength, and elongation at break by 161, 271, and 195 %, respectively. Additionally, the nisin content in fermentation broth was improved by 170 % after co-culture, accompanied by an 8 % increase in pH as well as 10 % decrease in lactate concentration. Real-time reverse transcription PCR analysis revealed an upregulation of 11 nisin-related genes after co-cultivation, with the highest increase in nisA (5.76-fold). To our knowledge, this is the first study which demonstrates that an increase in secondary metabolites after co-culturing is modulated by gene expression. This research offers a cost-effective approach for BC composite production and presents a technique to enhance metabolite concentration through the regulation of relevant genes.

Preparation and characterization of bacterial cellulose synthesized by kombucha from vinegar residue

Bacterial cellulose (BC) has been widely applied in various fields due to its excellent physicochemical properties, but its high production cost remains a challenge. Herein, the present study aimed to utilize the hydrolysate of vinegar residue (VR) as the only medium to realize the cost-effective production of BC. The BC production was optimized by the single-factor test. The treatment of 6 % VR concentration with 3 % acid concentration at 100 °C for 1.5 h and 96 U/mL of cellulase for 4 h at 50 °C obtained a maximum reducing sugar concentration of about 32 g/L. Additionally, the VR hydrolysate treated with 3 % active carbon (AC) at 40 °C for 0.5 h achieved a total phenol removal ratio of 86 %. The yield of BC reached 2.1 g/L under the optimum conditions, which was twice compared to the standard medium. The produced BC was characterized by SEM, FT-IR, XRD, and TGA analyses, and the results indicated that the BC prepared by AC-treated VR hydrolysate had higher fiber density, higher crystallinity, and good thermal stability. Furthermore, the regenerated BC (RBC) fibers with a tensile stress of 400 MPa were prepared successfully using AmimCl solution as a solvent by dry-wet-spinning method. Overall, the VR waste could be used as an alternative carbon source for the sustainable production of BC, which could be further applied to RBC fibers preparation.

A potential bilayer skin substitute based on electrospun silk-elastin-like protein nanofiber membrane covered with bacterial cellulose

Skin substitutes are designed to promote wound healing by replacing extracellular matrix. Silk-elastin-like protein is a renewable extracellular matrix-like material that integrated the advantages of silk and elastin-like protein. In this study, electrospun silk-elastin-like protein (SELP) nanofiber membrane covered with bacterial cellulose (BC) was created as a potential skin substitute to mimic gradient structure of epidermis and dermis of skin. The two layers were glued together using adhesive SELP containing 3,4-dihydroxyphenylalanine (DOPA) converted from tyrosine by tyrosinase. Skin topical drugs commonly used in clinical practice can penetrate through the SELP/BC barrier, and the rate of penetration is proportional to drug concentration. BC with dense fibrous structure can act as a barrier to preserve the inner SELP layer and prevent bacterial invasion, with a blocking permeation efficiency over 99% against four species of bacteria. Cell experiments demonstrated that the reticular fibers of SELP could provide an appropriate growth environment for skin cells proliferation and adhesion, which is considered to promote tissue repair and regeneration. The promising results support this strategy to fabricate a silk-elastin-like protein-based biomaterial for skin substitutes in the clinical treatment of full skin injuries and ulcers.

Bacterial cellulose based TiO2-CdS nanocomposite gel with enhanced photocatalytic activity for adsorptive degradation of cationic dye

Dye released by industrial is one of the main known pollutants in wastewater, which is harmfully affected to the human health. Adsorptive method by absorbents and photocatalytic degradation technique are advanced technologies to remove dyes from wastewater. However, the single technique mentioned above has imperfections limiting its application. Herein, in order to integrate the two techniques and take both advantages, bacterial cellulose (BC) based titanium dioxide (TiO2)‑cadmium sulfide (CdS) nanocomposite gel was prepared by microwave-assisted solvothermal synthesis. The BC@TiO2-CdS nanocomposite gel was characterized by SEM, EDS, XRD, XPS, Raman spectral and TG, its photocatalytic mechanism was proved by PL. The results showed the TiO2-CdS nanophotocatalyst exhibited binary hierarchical structure and followed the Z-scheme type photocatalytic system. The Z-scheme heterojunction is advantageous for photo-generated charge separation and migration. The photocatalytic performance of BC@TiO2-CdS nanocomposite gel was evaluated by MB degradation under visible light irradiation. Due to synergistic effect of BC matrix and TiO2-CdS, the as-prepared BC@TiO2-CdS nanocomposite gel possesses enhanced photocatalytic activity with 94.47 % removal of methylene blue (MB) after 180 min visible light irradiation. Therefore, this work provides a facile route to fabricate bio-mass based efficient nanophotocatalytic material for pretreating the water pollution.

Effect of in-situ biochemical modification on the synthesis, structure, and function of xanthan gum based bacterial cellulose generated from Tieguanyin oolong tea residue hydrolysate

The effect of in-situ biochemical modification on the synthesis, structure, and function of xanthan gum based bacterial cellulose generated from Tieguanyin oolong tea residue hydrolysate was evaluated for the first time. This modification could overcome the inhibitory effect of the hydrolysate and the bacterial cellulose yield with 0.6% xanthan gum addition increased by 260.8% compared with that without xanthan gum addition. Bacterial cellulose and xanthan gum were combined by the in-situ modification and the alteration of fermentation medium rheological properties by xanthan gum addition might be beneficial for their combination. The average diameter of the bacterial cellulose microfibrils was increased by the modification, and it had a great influence on the crystalline structure of the bacterial cellulose. Additionally, both the water absorption and texture properties of the bacterial cellulose was strengthened by the modification. Overall, this modification showed great potential for efficient and effective xanthan gum based bacterial cellulose production.

Fabrication of Dual-Functional Bacterial-Cellulose-Based Composite Anion Exchange Membranes with High Dimensional Stability and Ionic Conductivity

Anion exchange membranes (AEMs) are increasingly becoming a popular research area due to their ability to function with nonprecious metals in electrochemical devices. Nevertheless, there is a challenge to simultaneously optimize the dimensional stability and ionic conductivity of AEMs due to the "trade-off" effect. Herein, we adopted a novel strategy of combining filling and cross-linking using functionalized bacterial cellulose (PBC) as a dual-functional porous support and brominated poly(phenylene oxide) (Br-PPO) as the cross-linking agent and filler. The PBC nanofiber framework together with cross-linking can provide a reliable mechanical support for the subsequent filled polymer, thus improving the mechanical properties and effectively limiting the size change of the final quaternized-PPO (QPPO)-filled PBC composite membrane. The composite membrane showed a very low swelling ratio of only 10.35%, even at a high water uptake (81.83% at 20 °C). Moreover, the existence of multiple -NR3+ groups in the cross-link bonds between BC and Br-PPO can provide extra OH- ion transport sites, contributing to the increase in ionic conductivity. The final membrane demonstrated a hydroxide ion conductivity of 62.58 mS cm-1, which was remarkably higher than that of the pure QPPO membrane by up to 235.93% (80 °C). The successful preparation of the PBC3/QPPO membrane provides an effective avenue to tackle the trade-off effect through a dual-functional strategy.

Flexible quasi-solid-state supercapacitors for anti-freezing power sources based on polypyrrole@cation-grafted bacterial cellulose

Polypyrrole (PPy)/cellulose nanofiber (CNF) composites have been widely used in flexible energy storage devices because of their lightweight, inherent mechanical flexibility and large specific surface area. However, it is still a challenge to obtain PPy/CNF composite electrodes with high cycling stability. Herein, an electrostatic self-assembly strategy was adopted to deposit anion-doped PPy onto cationic poly(methacryloxyethyltrimethyl ammonium chloride)-grafted bacterial cellulose (BCD) nanofibers. The optimized PPy@BCD electrode demonstrated a high areal capacitance of 6208 mF cm-2 at a current density of 0.5 mA cm-2 and superior cycling stability (a capacitance retention of 100 % after 10,000 charge-discharge cycles at 10 mA cm-2). A quasi-solid-state anti-freezing flexible supercapacitor (AF-FSC) was designed by employing polyacrylamide organohydrogel electrolyte, yielding an areal capacitance of 2930.6 mF cm-2 at 1 mA cm-2 and a capacitance retention of 92.2 % after 1000 cycles at -20 °C. The present AF-FSC is expected to serve as a power source in real-life low-temperature applications.

Bone-like apatite formation in biocompatible phosphate-crosslinked bacterial cellulose-based hydrogels for bone tissue engineering applications

Addressing major bone injuries is a challenge in bone regeneration, necessitating innovative 3D hydrogel-based therapeutic approaches to enhance scaffold properties for better bioactivity. Bacterial cellulose (BC) is an excellent scaffold for bone tissue engineering due to its biocompatibility, high porosity, substantial surface area, and remarkable mechanical strength. However, its practical application is limited due to a lack of inherent osteogenic activity and biomineralization ability. In this study, we synthesized bone-like apatite in biocompatible BC hydrogel by introducing phosphate groups. Hydrogels were prepared using fibrous BC, acrylamide (AM), and bis [2-methacryloyloxy] ethyl phosphate (BMEP) as a crosslinker through free radical polymerization (P-BC-PAM). P-BC-PAM hydrogels exhibited outstanding compressive mechanical properties, highly interconnected porous structures, good swelling, and biodegradable properties. BMEP content significantly influenced the physicochemical and biological properties of the hydrogels. Increasing BMEP content enhanced the fibrous structure, porosity from 85.1 % to 89.5 %, and compressive mechanical strength. The optimized hydrogel (2.0P-BC-PAM) displayed maximum compressive stress, toughness, and elastic modulus at 75 % strain: 221 ± 0.08 kPa, 24,674.2 ± 978 kPa, and 11 ± 0.47 kPa, respectively. P-BC-PAM hydrogels underwent biomineralization in simulated body fluid (SBF) for 14 days, forming bone-like apatite with a Ca/P ratio of 1.75, similar to hydroxyapatite. Confirmed by Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and field-emission scanning electron microscopy (FE-SEM), this suggests their potential as scaffolds for bone tissue engineering. MC3T3-E1 osteoblast cells effectively attached and proliferated on P-BC-PAM. In summary, this study contributes insights into developing phosphate-functionalized BC-based hydrogels with potential applications in bone tissue engineering.

Composite of bacterial cellulose and gelatin: A versatile biocompatible scaffold for tissue engineering

Synthesis of 0.4 ± 0.03 g/L per day of pure and porous bacterial cellulose (BC) scaffolds (scaffBC) and BC scaffolds modified with gelatin (scaffBC/Gel) was carried out using the Medusomyces gisevii Sa-28 bacterial strain. FT-IR spectroscopy and X-ray diffraction analysis showed that the scaffolds largely consist of crystalline cellulose I (Iα, Iß). Heating of BC with gelatin to 60 °C with subsequent lyophilization led to its modification by adsorption and binding of low-molecular fractions of gelatin and the formation of small pores between the fibers, which increased the biocompatibility and solubility of BC. The solubility of scaffBC and scaffBC/Gel was 20.8 % and 44.4 %, respectively, which enhances degradation in vivo. Light microscopy, scanning electron microscopy, and microcomputed tomography showed a uniform distribution of pores with a diameter of 100-500 μm. The chicken chorioallantoic membrane (CAM) model and subcutaneous implantation in rats confirmed low immunogenicity and intense formation of collagen fibers in both scaffolds and active germination of new blood vessels in scaffBC and scaffBC/Gel. The proliferative cellular activity of fibroblasts confirmed the safety of scaffolds. Taken together, the results obtained show that scaffBC/Gel can be used for the engineering of hard and soft tissues, which opens opportunities for further research.

Preparation of bacterial cellulose-based antibacterial membranes with prolonged release of drugs: Emphasis on the chemical structure of drugs

Bacterial cellulose (BC) based antibacterial membranes were synthesized, including BC-cefoperazone (BC-CEF) and BC-cefoperazone sodium (BC-CEF/Na). To examine the various drug loading processes, the structure, morphology, and physical-chemical characteristics of membranes were evaluated. Results demonstrated that both types of medicines were successfully absorbed into membranes, and membranes displayed identical morphology and FT-IR peaks. BC-CEF showed lower crystalline of XRD, which was likely caused by the combination of carboxyl and hydroxyl. However, there were no drug peaks seen in the membranes, indicating no alteration of ribbon crystallization of BC. Two types of antibacterial membranes have significantly distinct drug-loading traits and drug-releasing profiles. The drug loading rate of CEF (46.4 mg/g) was significantly greater than CEF/Na (30.3 mg/g). The cumulative drug-releasing profiles showed that only BC-CEF continues to release drugs for a lengthy period up to 48 h and exhibited good antimicrobial activity against S. aureus and E. coli until 48 h. The cytotoxicity assay demonstrated the great biocompatibility of all membranes. Findings indicated that BC-CEF has the potential use as a prolonged biocide in the biomedical. The idea that BC membranes can naturally incorporate the carboxyl groups from antibiotics is also innovative and can be useful in developing of drug delivery systems.