Modification of poly(lactate) via polymer blending with microbially produced poly[(R)-lactate-co-(R)-3-hydroxybutyrate] copolymers

This study investigated the effect of polymer blending of microbially produced poly[(R)-lactate-co-(R)-3-hydroxybutyrate] copolymers (LAHB) with poly(lactate) (PLA) on their mechanical, thermal, and biodegradable properties. Blending of high lactate (LA) content and high molecular weight LAHB significantly improved the tensile elongation of PLA up to more than 250 % at optimal LAHB composition of 20-30 wt%. Temperature-modulated differential scanning calorimetry and dynamic mechanical analysis revealed that PLA and LAHB were immiscible but interacted with each other, as indicated by the mutual plasticization effect. Detailed morphological characterization using scanning probe microscopy, small-angle X-ray scattering, and solid-state NMR confirmed that PLA and LAHB formed a two-phase structure with a characteristic length scale as small as 20 nm. Because of mixing in this order, the polymer blends were optically transparent. The biological oxygen demand test of the polymer blends in seawater indicated an enhancement of PLA biodegradation during biodegradation of the polymer blends.

Polyhydroxyalkanoate recovery overview: properties, characterizations, and extraction strategies

Due to their excellent properties, polyhydroxyalkanoates are gaining increasing recognition in the biodegradable polymer market. These biogenic polyesters are characterized by high biodegradability in multiple environments, overcoming the limitation of composting plants only and their versatility in production. The most consolidated techniques in the literature or the reference legislation for the physical, chemical and mechanical characterisation of the final product are reported since its usability on the market is still linked to its quality, including the biodegradability certificate. This versatility makes polyhydroxyalkanoates a promising prospect with the potential to replace fossil-based thermoplastics sustainably. This review analyses and compares the physical, chemical and mechanical properties of poly-β-hydroxybutyrate and poly-β-hydroxybutyrate-co-β-hydroxyvalerate, indicating their current limitations and strengths. In particular, the copolymer is characterised by better performance in terms of crystallinity, hardness and workability. However, the knowledge in this area is still in its infancy, and the selling prices are too high (9-18 $ kg-1). An analysis of the main extraction techniques, established and in development, is also included. Solvent extraction is currently the most widely used method due to its efficiency and final product quality. In this context, the extraction phase of the biopolymer production process remains a major challenge due to its high costs and the need to use non-halogenated toxic solvents to improve the production of good-quality bioplastics. The review also discusses all fundamental parameters for optimising the process, such as solubility and temperature.

The production, recovery, and valorization of polyhydroxybutyrate (PHB) based on circular bioeconomy

As an energy-storage substance of microorganisms, polyhydroxybutyrate (PHB) is a promising alternative to petrochemical polymers. Under appropriate fermentation conditions, PHB-producing strains with metabolic diversity can efficiently synthesize PHB using various carbon sources. Carbon-rich wastes may serve as alternatives to pure sugar substrates to reduce the cost of PHB production. Genetic engineering strategies can further improve the efficiency of substrate assimilation and PHB synthesis. In the downstream link, PHB recycling strategies based on green chemistry concepts can replace PHB extraction using chlorinated solvents to enhance the economics of PHB production and reduce the potential risks of environmental pollution and health damage. To avoid carbon loss caused by biodegradation in the traditional sense, various strategies have been developed to degrade PHB waste into monomers. These monomers can serve as platform chemicals to synthesize other functional compounds or as substrates for PHB reproduction. The sustainable potential and cycling value of PHB are thus reflected. This review summarized the recent progress of strains, substrates, and fermentation approaches for microbial PHB production. Analyses of available strategies for sustainable PHB recycling were also included. Furthermore, it discussed feasible pathways for PHB waste valorization. These contents may provide insights for constructing PHB-based comprehensive biorefinery systems.

The effect of spent coffee ground (SCG) loading, matrix ratio and biological treatment of SCG on poly(hydroxybutyrate) (PHB)/poly(lactic acid) (PLA) polymer blend

This study investigates the effects of SCG embedded into biodegradable polymer blends and aimed to formulate and characterise biomass-reinforced biocomposites using spent coffee ground (SCG) as reinforcement in PHB/PLA polymer blend. The effect of SCG filler loading and varying PHB/PLA ratios on the tensile properties and morphological characteristics of the biocomposites were examined. The results indicated that tensile properties reduction could be due to its incompatibility with the PHB/PLA matrixSCG aggregation at 40 wt% content resulted in higher void formation compared to lower content at 10 wt%. A PHB/PLA ratio of 50/50 with SCG loading 20 wt% was chosen for biocomposites with treated SCG. Biological treatment of SCG using Phanerochaete chrysosporium CK01 and Aspergillus niger DWA8 indicated P. chrysosporium CK01 necessitated a higher moisture content for optimum growth and enzyme production, whereas the optimal conditions for enzyme production (50-55 %, w/w) differed from those promoting A. niger DWA8 growth (40 %, w/w). SEM micrographs highlighted uniform distribution and effective wetting of treated SCG, resulting in improvements of tensile strength and modulus of biocomposites, respectively. The study demonstrated the effectiveness of sustainable fungal treatment in enhancing the interfacial adhesion between treated SCG and the PHB/PLA matrix.

In vitro degradation and antibacterial activity of bacterial cellulose deposited flax fabric reinforced with polylactic acid and polyhydroxybutyrate

The objective of this study was to prepare biocomposites through the solution casting method followed by compression moulding in which bacterial cellulose (BC) deposited flax fabric (FF) produced through fermentation is coated with minimal amount of polylactic acid (PLA) and polyhydroxybutyrate (PHB). Biocomposites incorporated with 60 % of PLA or PHB (% w/w) show enhanced tensile strength. Cross-sectional morphology showed good superficial interaction of these biopolymers with fibres of FF thereby filling up the gaps present between the fibres. The tensile strength of biocomposites at 60 % PLA and 60 % PHB improved from 37.97 MPa (i.e., BC deposited FF produced in presence of honey) to 67.17 MPa and 56.26 MPa, respectively. Further, 0.25 % of nalidixic acid (NA) (% w/w) and 6 % of oleic acid (OA) (% w/w) incorporation into the biocomposites imparted prolonged antibacterial activity against Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa. The in vitro cytotoxicity of biocomposites was determined using L929 mouse fibroblast cells. The 3-(4,5-cime- thylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide cytotoxicity tests showed that the PHB derived biocomposites along with antibacterial compounds in it were non-toxic. In vitro degradation of biocomposites was measured for up to 8 weeks in the mimicked physiological environment that showed a gradual rate of degradation over the period.

Catalytic Synthesis of (S)-CHBE by Directional Coupling and Immobilization of Carbonyl Reductase and Glucose Dehydrogenase

Ethyl (S)-4-chloro-3-hydroxybutyrate ((S)-CHBE) is an important chiral intermediate in the synthesis of the cholesterol-lowering drug atorvastatin. Studying the use of SpyTag/SpyCatcher and SnoopTag/SnoopCatcher systems for the asymmetric reduction reaction and directed coupling coenzyme regeneration is practical for efficiently synthesizing (S)-CHBE. In this study, Spy and Snoop systems were used to construct a double-enzyme directed fixation system of carbonyl reductase (BsCR) and glucose dehydrogenase (BsGDH) for converting 4-chloroacetoacetate (COBE) to (S)-CHBE and achieving coenzyme regeneration. We discussed the enzymatic properties of the immobilized enzyme and the optimal catalytic conditions and reusability of the double-enzyme immobilization system. Compared to the free enzyme, the immobilized enzyme showed an improved optimal pH and temperature, maintaining higher relative activity across a wider range. The double-enzyme immobilization system was applied to catalyze the asymmetric reduction reaction of COBE, and the yield of (S)-CHBE reached 60.1% at 30 °C and pH 8.0. In addition, the double-enzyme immobilization system possessed better operational stability than the free enzyme, and maintained about 50% of the initial yield after six cycles. In summary, we show a simple and effective strategy for self-assembling SpyCatcher/SnoopCatcher and SpyTag/SnoopTag fusion proteins, which inspires building more cascade systems at the interface. It provides a new method for facilitating the rapid construction of in vitro immobilized multi-enzyme complexes from crude cell lysate.

Life Cycle of Functional All-Green Biocompatible Fibrous Materials Based on Biodegradable Polyhydroxybutyrate and Hemin: Synthesis, Service Life, and the End-of-Life via Biodegradation

This article addresses the entire life cycle of the all-green fibrous materials based on poly(3-hydroxybutyrate) (PHB) containing a natural biocompatible additive Hemin (Hmi): from preparation, service life, and the end of life upon in-soil biodegradation. Fibrous PHB/Hmi materials with a highly developed surface and interconnected porosity were prepared by electrospinning (ES) from Hmi-containing feed solutions. Structural organization of the PHB/Hmi materials (porosity, uniform structure, diameter of fibers, surface area, distribution of Hmi within the PHB matrix, phase composition, etc.) is shown to be governed by the ES conditions: the presence of even minor amounts of Hmi in the PHB/Hmi (below 5 wt %) serves as a powerful tool for the control over their structure, performance, and biodegradation. Service characteristics of the PHB/Hmi materials (wettability, prolonged release of Hmi, antibacterial activity, breathability, and mechanical properties) were studied by different physicochemical methods (scanning electron microscopy, Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, differential scanning calorimetry, contact angle measurements, antibacterial tests, etc.). The effect of the structural organization of the PHB/Hmi materials on their in-soil biodegradation at the end of life was analyzed, and key factors providing efficient biodegradation of the PHB/Hmi materials at all stages (from adaptation to mineralization) are highlighted (high surface area and porosity, thin fibers, release of Hmi, etc.). The proposed approach allows for target-oriented preparation and structural design of the functional PHB/Hmi nonwovens when their structural supramolecular organization with a highly developed surface area controls both their service properties as efficient antibacterial materials and in-soil biodegradation upon the end of life.

Production of poly-3-hydroxybutyrate (PHB) nanoparticles using grape residues as the sole carbon source

The production of poly-3-hydroxybutyrate (PHB) on an industrial scale remains a major challenge due to its higher production cost compared to petroleum-based plastics. As a result, it is necessary to develop efficient fermentative processes using low-cost substrates and identify high-value-added applications where biodegradability and biocompatibility properties are of fundamental importance. In this study, grape residues, mainly grape skins, were used as the sole carbon source in Azotobacter vinelandii OP cultures for PHB production and subsequent nanoparticle synthesis based on the extracted polymer. The grape residue pretreatment showed a high rate of conversion into reducing sugars (fructose and glucose), achieving up to 43.3 % w w-1 without the use of acid or external heat. The cultures were grown in shake flasks, obtaining a biomass concentration of 2.9 g L-1 and a PHB accumulation of up to 37.7 % w w-1. PHB was characterized using techniques such as Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The formation of emulsified PHB nanoparticles showed high stability, with a particle size between 210 and 240 nm and a zeta potential between -12 and - 15 mV over 72 h. Owing to these properties, the produced PHB nanoparticles hold significant potential for applications in drug delivery.

Physicochemical characterization of polyhydroxybutyrate (PHB) produced by the rare halophile Brachybacterium paraconglomeratum MTCC 13074

BACKGROUND

Polyhydroxybutyrate is a biopolymer produced by bacteria and archaea under nitrogen-limiting conditions. PHB is an essential polymer in the bioplastic sector because of its biodegradability, eco-friendliness, and adaptability. The characterization of PHB is a multifaceted process for studying the structure and its properties. This entire aspect can assure the long-term viability and performance attributes of the PHB. The characteristics of PHB extracted from the halophile Brachybacterium paraconglomeratum were investigated with the objective of making films for application in healthcare.

RESULTS

This was the first characterization study on PHB produced by a rare halophile, Brachybacterium paraconglomeratum (MTCC 13074). In this study, the strain produced 2.72 g/l of PHB for.5.1 g/l of biomass under optimal conditions. Methods are described for the determination of the physicochemical properties of PHB. The prominent functional groups CH3 and C = O were observed by FT-IR and the actual chemical structure of the PHB was deduced by NMR. GCMS detects the confirmation of four methyl ester derivatives of the extracted PHB in the sample. Mass spectrometry revealed the molecular weight of methyl 3-hydroxybutyric acid (3HB) present in the extract. The air-dried PHB films were exposed to TGA, DSC and a universal testing machine to determine the thermal profile and mechanical stability. Additionally, the essential property of biopolymers like viscosity was also assessed for the extracted PHB.

CONCLUSIONS

The current study demonstrated the consistency and quality of B. paraconglomeratum PHB. Therefore, Brachybacterium sps are also a considerable source of PHB with desired characteristics for industrial production.

Traditional Chinese medicine residue enzymatic hydrolysates for production of polyhydroxyalkanoate by newly isolated Bacillus altitudinis

Traditional Chinese medicine residue (TCMR) was utilized as an inexpensive carbon source for the production of poly(3-hydroxybutyrate) (PHB) using the newly isolated Bacillus altitudinis HBU-SI7. The results showed that Yu Ping Feng TCMR could be directly hydrolysed by cellulase to obtain a high proportion of glucose (99 % of total sugar) without pretreatment, achieving an enzymatic hydrolysis rate of up to 89.2 %. B. altitudinis could grow and produce PHB when using enzymatically hydrolysed TCMR in a 5-L fermenter. After 20 h of fermentation, the maximum concentration of PHB was 11.2 g/L, and the highest cell dry weight (CDW) was 15.4 g/L, with 72.7 % of the PHB fraction in CDW. Moreover, this strain could utilize enzymatic hydrolysates from various herbal formulas to produce high levels of PHB. This novel approach aims to accumulate PHB from TCMR hydrolysates, offering an effective and environmentally friendly method to reduce production costs and achieve mass production.

Synergistic approach for enhanced production of polyhydroxybutyrate by Bacillus pseudomycoides SAS-B1: Effective utilization of glycerol and acrylic acid through fed-batch fermentation and its environmental impact assessment

The continual rise in the consumption of petroleum-based synthetic polymers raised a significant environmental concern. Bacillus pseudomycoides SAS-B1 is a gram-positive rod-shaped halophilic bacterium capable of accumulating Polyhydroxybutyrate (PHB)-an intracellular biodegradable polymer. In the present study, the optimal conditions for cell cultivation in the seed media were developed. The optimal factors included a preservation age of 14 to 21 days (with 105 to 106 cells/mL), inoculum size of 0.1 % (w/v), 1 % (w/v) glucose, and growth temperature of 30 °C. The cells were then cultivated in a two-stage fermentation process utilizing glycerol and Corn Steep Liquor (CSL) as carbon and nitrogen sources, respectively. PHB yield was effectively increased from 2.01 to 9.21 g/L through intermittent feeding of glycerol and CSL, along with acrylic acid. FTIR, TGA, DSC, and XRD characterization studies were employed to enumerate the recovered PHB and determine its physicochemical properties. Additionally, the study assessed the cradle-to-gate Life Cycle Assessment (LCA) of PHB production, considering net CO2 generation and covering all major environmental impact categories. The production of 1000 kg of PHB resulted in lower stratospheric ozone depletion and comparatively reduced carbon dioxide emissions (2022.7 kg CO2 eq.) and terrestrial ecotoxicity (9.54 kg 1,4-DCB eq.) than typical petrochemical polymers.

Using an aromatic amide as nucleating agent to enhance the crystallization and dimensional stability of poly(3-hydroxybutyrate-co-3-hydroxyhexanate)

Biosynthesized poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) has emerged as a promising biodegradable polymer with a great potential to compete with traditional petroleum-based plastics, however, the poor crystallization ability makes it challenge to transform into high-performance products via common melt-processing methods. Herein, we demonstrate that N,N'-dicyclohexyl-2,6-naphthalenedicarboxamide (TMB) can serve as an efficient nucleating agent to significantly enhance the crystallization and resulting storage stability of PHBHHx. The results indicate that PHBHHx with small amounts of TMB (0.3-0.5 wt%) can crystallize completely even under a rapid cooling rate of 100 °C/min and the isothermal crystallization time is greatly reduced. As a result, the crystallinity of the injection-molded PHBHHx products is increased from 24.5 % to 39.5 %, without secondary crystallization after being stored at room temperature for 6 h. The products exhibit superior dimensional stability and the post-shrinkage can be decreased to as low as 0.1 %. Our work offers a feasible method to develop high-performance PHBHHx materials with remarkably enhanced crystallization ability.

Comprehensive Biodegradation Analysis of Chemically Modified Poly(3-hydroxybutyrate) Materials with Different Crystal Structures

This work presents a comprehensive analysis of the biodegradation of polyhydroxybutyrate (PHB) and chemically modified PHB with different chemical and crystal structures in a soil environment. A polymer modification reaction was performed during preparation of the chemically modified PHB films, utilizing 2,5-dimethyl-2,5-di(tert-butylperoxy)-hexane as a free-radical initiator and maleic anhydride. Films of neat PHB and chemically modified PHB were prepared by extrusion and thermocompression. The biological agent employed was natural mixed microflora in the form of garden soil. The course and extent of biodegradation of the films was investigated by applying various techniques, as follows: a respirometry test to determine the production of carbon dioxide through microbial degradation; scanning electron microscopy (SEM); optical microscopy; fluorescence microscopy; differential scanning calorimetry (DSC); and X-ray diffraction (XRD). Next-generation sequencing was carried out to study the microbial community involved in biodegradation of the films. Findings from the respirometry test indicated that biodegradation of the extruded and chemically modified PHB followed a multistage (2-3) course, which varied according to the spatial distribution of amorphous and crystalline regions and their spherulitic morphology. SEM and polarized optical microscopy (POM) confirmed that the rate of biodegradation depended on the availability of the amorphous phase in the interspherulitic region and the width of the interlamellar region in the first stage, while dependence on the size of spherulites and thickness of spherulitic lamellae was evident in the second stage. X-ray diffraction revealed that orthorhombic α-form crystals with helical chain conformation degraded concurrently with β-form crystals with planar zigzag conformation. The nucleation of PHB crystals after 90 days of biodegradation was identified by DSC and POM, a phenomenon which impeded biodegradation. Fluorescence microscopy evidenced that the crystal structure of PHB affected the physiological behavior of soil microorganisms in contact with the surfaces of the films.

Response surface optimization of poly-β-hydroxybutyrate synthesized by Bacillus cereus L17 using acetic acid as carbon source

A strain of Bacillus that can tolerate 10 g/L acetic acid and use the volatile fatty acids produced by the hydrolysis and acidification of activated sludge to produce polyhydroxyalkanoate was screened from the activated sludge of propylene oxide saponification wastewater. The strain was identified by 16S rRNA sequencing and phylogenetic tree analysis and was named Bacillus cereus L17. Various characterization methods showed that the polymer synthesized by strain L17 is poly-β-hydroxybutyrate, which has low crystallinity, good ductility and toughness, high thermal stability and a low polydispersity coefficient. It has wide thermoplastic material operating space as well as industrial and medicinal applications. The optimal fermentation conditions were determined by single factor optimization. Then, Plackett-Burman and Box-Behnken design experiments were carried out according to the single factor optimization results, and the response surface optimization was completed. The final results were: initial pH 6.7, temperature 25 °C, and loading volume 124 mL. The verification experiment showed that the yield of poly-β-hydroxybutyrate after optimization increased by 35.2 % compared to that before optimization.

Influence of environmental conditions on accumulated polyhydroxybutyrate in municipal activated sludge

Poly(3-hydroxybutyrate) (PHB) was accumulated in full-scale municipal waste activated sludge at pilot scale. After accumulation, the fate of the PHB-rich biomass was evaluated over two weeks as a function of initial pH (5.5, 7.0 and 10), and incubation temperature (25, 37 and 55°C), with or without aeration. PHB became consumed under aerobic conditions as expected with first order rate constants in the range of 0.19 to 0.55 d^-1. Under anaerobic conditions, up to 63 percent of the PHB became consumed within the first day (initial pH 7, 55°C). Subsequently, with continued anaerobic conditions, the polymer content remained stable in the biomass. Degradation rates were lower for acidic anaerobic incubation conditions at a lower temperature (25°C). Polymer thermal properties were measured in the dried PHB-rich biomass and for the polymer recovered by solvent extraction using dimethyl carbonate. PHB quality changes in dried biomass, indicated by differences in polymer melt enthalpy, correlated to differences in the extent of PHB extractability. Differences in the expressed PHB-in-biomass melt enthalpy that correlated to the polymer extractability suggested that yields of polymer recovery by extraction can be influenced by the state or quality of the polymer generated during downstream processing. Different post-accumulation process biomass management environments were found to influence the polymer quality and can also influence the extraction of non-polymer biomass. An acidic post-accumulation environment resulted in higher melt enthalpies in the biomass and, consequently, higher extraction efficiencies. Overall, acidic environmental conditions were found to be favourable for preserving both quantity and quality after PHB accumulation in activated sludge.

On the bioprotective effects of 3-hydroxybutyrate: Thermodynamic study of binary 3HB-water systems

Microorganisms must face various inconvenient conditions; therefore, they developed several approaches for protection. Such a strategy also involves the accumulation of compatible solutes, also called osmolytes. It has been proved that the monomer unit 3-hydroxybutyrate (3HB), which is present in sufficient concentration in poly(3-hydroxybutyrate) (PHB)-accumulating cells, serves as a chemical chaperone protecting enzymes against heat and oxidative stress and as a cryoprotectant for enzymes, bacterial cells, and yeast. The stress robustness of the cells is also strongly dependent on the behavior and state of intracellular water, especially during stress exposure. For a better understanding of the protective mechanism and effect of strongly hydrophilic 3HB in solutions at a wide range of temperatures, a binary phase diagram of system sodium 3HB (Na3HB)-water in equilibrium and the state diagrams showing the glass transitions in the system were constructed. To investigate the activity of water in various compositions of the Na3HB/water system, three experimental techniques have been used (dynamic water sorption analysis, water activity measurements, and sorption calorimetry). First, Na3HB proved its hydrophilic nature, which is very comparable with known compatible solutes (trehalose). Results of differential scanning calorimetry demonstrated that Na3HB is also highly effective in depressing the freezing point and generating a large amount of nonfrozen water (1.35 g of water per gram of Na3HB). Therefore, Na3HB represents a very effective cryoprotectant that can be widely used for numerous applications.

Isothermal crystallization of polyhydroxyalkanoate (PHA) utilizing Raman spectroscopy to follow chain packing as well as molecular motion

Raman spectra of bioplastic poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHx at 13.8 % Hx) were recorded between -250 cm^-1 and 3200 cm^-1 during isothermal crystallization at 25⁰C after quenching from the melt in liquid nitrogen. At room temperature the crystallization proceeds slowly, so spectra were recorded over a 14-hour period. While there are spectral changes throughout the spectrum, the focus was on interpretable bands known to be sensitive to crystalline form. These bands included the carbonyl band that sharpens and shifts, a pair of bands on the high energy side of the carbon-hydrogen stretch, and a low frequency band that we assign to the molecular phonon in the crystal unit cell. After appropriate pre-processing of the spectra, they were further analyzed by 2D-COS (two-dimensional correlation spectroscopy) that provides determination of the order in which the polymer functional regions assemble into the crystalline state. According to this analysis one of the methyl CH's interacts with the carbonyl bond to produce a line at 3000 cm^-1. Following that, multiple changes appear in the carbonyl region, the strong CH band at 2930 cm^-1 of the crystalline phase grows, then the 80 cm^-1 phonon band, and the splitting of the methyl CH only appears after the phonon. From this sequence one can derive a picture of how the polymer unit locks into the crystal form. This can be of interest to commercialization of the materials because mechanical properties are intimately controlled by the crystallinity of the material. By understanding how the crystallization process proceeds, it can be engineered to be "fit for purpose" for a polymer targeted for a specific use.

Characterization of Polyhydroxybutyrate, PHB, Synthesized by Newly Isolated Haloarchaea Halolamina spp

This work aims to characterize the haloarchaeal diversity of unexplored environmental salty samples from a hypersaline environment on the southern coast of Jeddah, Saudi Arabia, looking for new isolates able to produce polyhydroxyalkanoates (PHAs). Thus, the list of PHA producers has been extended by describing two species of Halolamina; Halolamina sediminis sp. strain NRS_35 and unclassified Halolamina sp. strain NRS_38. The growth and PHA-production were investigated in the presence of different carbon sources, (glucose, sucrose, starch, carboxymethyl cellulose (CMC), and glycerol), pH values, (5-9), temperature ranges (4-65 °C), and NaCl concentrations (100-350 g L-1). Fourier-transform infra-red analysis (FT-IR) and Liquid chromatography-mass spectrometry (LC-MS) were used for qualitative identification of the biopolymer. The highest yield of PHB was 33.4% and 27.29% by NRS_35 and NRS_38, respectively, using starch as a carbon source at 37 °C, pH 7, and 25% NaCl (w/v). The FT-IR pattern indicated sharp peaks formed around 1628.98 and 1629.28 cm-1, which confirmed the presence of the carbonyl group (C=O) on amides and related to proteins, which is typical of PHB. LC-MS/MS analysis displayed peaks at retention times of 5.2, 7.3, and 8.1. This peak range indicates the occurrence of PHB and its synthetic products: Acetoacetyl-CoA and PHB synthase (PhaC). In summary, the two newly isolated Halolamina species showed a high capacity to produce PHB using different sources of carbon. Further research using other low-cost feedstocks is needed to improve both the quality and quantity of PHB production. With these results, the use of haloarchaea as cell factories to produce PHAs is reinforced, and light is shed on the global concern about replacing plastics with biodegradable polymers.

Biogas bioconversion into poly(3-hydroxybutyrate) by a mixed microbial culture in a novel Taylor flow bioreactor

Biogas-based biopolymer production represents an alternative biogas valorization route with potential to cut down plastic pollution and greenhouse gas emissions. This study investigated for the first time the continuous bioconversion of methane, contained in biogas, into poly(3-hydroxybutyrate) (PHB) by a mixed methanotrophic culture using an innovative high mass-transfer Taylor flow bioreactor. Following a hydrodynamic flow regime mapping, the influence of the gas residence time and the internal gas recirculation on CH₄ abatement was assessed under non nutrient limiting conditions. Under optimal operational conditions (gas residence time of 60 min and internal gas recycling ratio of 17), the bioreactor was able to support a CH₄ removal efficiency of 63.3%, a robust CH₄ elimination capacity (17.2 g-CH₄ m^-3h^-1) and a stable biomass concentration (1.0 g L^-1). The simultaneous CH₄ abatement and PHB synthesis was investigated under 24-h:24-h nitrogen feast/famine continuous operation. The cyclic nitrogen starvation and the Taylor flow imposed in the bioreactor resulted in a relatively constant biomass concentration of 0.6 g L^-1 with PHB contents ranging from 11 to 32% w w^-1 (on a dry weight basis), entailing an average PHB productivity of 5.9 g-PHB m^-3 d^-1 with an associated PHB yield of 19.8 mg-PHB g-CH₄^-1. Finally, the molecular analysis of the microbial population structure indicated that type II methanotrophs outcompeted non-PHB accumulating type I methanotrophs, with a heterotrophic-methanotrophic consortium enriched in Methylocystis, Hyphomicrobium, Rubinisphaeraceae SH PL14 and Pseudonocardia.

Turning mannitol-rich agricultural waste to poly(3-hydroxybutyrate) with Cobetia amphilecti fermentation and recovery with methyl levulinate as a green solvent

The present study explored the use of mannitol and mannitol-rich agro-industrial wastes as substrates for PHB production by Cobetia amphilecti isolated from the green Ulva sp. seaweed. Cultivation of C. amphilecti on mannitol, celery, and olive leaves (OLs) waste led to 4.20, 6.00, and 5.16 g L^-1 of cell dry mass (CDM), 76.3, 25.5, and 12.0% of PHB content in CDM and 3.2, 1.53, and 0.62 g L^-1 of PHB concentration, respectively; which suggested that they can be exploited as carbon substrates for the production of PHB. Extraction of PHB from C. amphilecti cultures by solubilization in the green solvent methyl levulinate (ML) (2% w/w, 140 °C, 1 h) indicated that the recovery yield and purity of PHB are above 97 and 90% w/w, respectively. The use of ML could be an attractive method for the recovery of PHB when safe and non-toxic solvents are required.

Detection of Exogenous γ-Hydroxybutyric Acid in Rat Blood Exosomes

OBJECTIVES

To find a method to distinguish exogenous gamma-hydroxybutyrate (GHB) from endogenous GHB by establishing ultra-high performance liquid chromatography-mass spectrometry (UPLC-MS) based on exosome for quantitative detection of GHB in the rat blood.

METHODS

Adult male SD rats were divided into 1 h, 5 h, 10 h administration group and control group. After 1 h, 5 h and 10 h of single precursor of GHB gamma-butyrolactone (GBL) intraperitoneal injection in administration groups, 5 mL blood was collected from the abdominal aorta. Meanwhile, the control group was given a same dose of normal saline, and 5 mL blood was collected at 1 h. Among the 5 mL blood, 0.5 mL was directly detected by HPLC-MS after pretreatment, and exosomes were extracted from the remaining blood by differential centrifugation and detected.

RESULTS

The concentration of GHB in the control group was (87.36±33.48) ng/mL, and the concentration with administration at 1 h, 5 h and 10 h was (110 400.00±1 766.35) ng/mL, (1 479.00±687.01) ng/mL and (133.60±12.17) ng/mL, respectively. The results of exosome detection showed that no peak GHB signal was detected in the control group and the 10 h administration group, and the concentrations of GHB at 1 h and 5 h administration groups were (91.47±33.44) ng/mL and (49.43±7.05) ng/mL, respectively.

CONCLUSIONS

GHB was detected in blood exosome by UPLC-MS, which indicated that exogenous GHB could be detected in plasma exosomes, while endogenous GHB could not be detected, suggesting that this method may be used as a basis to determine whether there is exogenous drug intake.

Aligned silk fibroin/poly-3-hydroxybutyrate nanofibrous scaffolds seeded with adipose-derived stem cells for tendon tissue engineering

In this work we investigated tenogenic differentiation of adipose-derived mesenchymal stem cells (AdMSCs), which were seeded onto silk fibroin/poly-3-hydroxybutyrate (SF/P3HB) scaffolds with aligned topography, and high mechanical strength. The electrospinning process was optimized by using the response surface method (RSM) and SF/P3HB nanofibrous matrices with a total polymer concentration of 5% (SF: PHB = 3: 1), flow rate 1 mL/h, collector rotation speed 2000 rpm, applied voltage 14 kV, and collector distance 25 cm were obtained. The average fiber diameter was 699 ± 203 nm and 80% of the nanofibers were aligned within the ±15^o range. SF reinforcement reduced the crystallinity of P3HB, and the elastic modulus was found to be 197.0 ± 7.7 MPa. The scaffolds showed bacteriostatic effect. A 21-day of cell culture study was performed with rat rAdMSCs in the absence and presence of tenogenic differentiation factor-5 (GDF-5). The results demonstrated that SF/P3HB scaffolds allow the cells to proliferate and differentiate to the tenocytes. However, no significant effect of GDF-5 on the differentiation of cells was observed. These findings indicated that our aligned SF/P3HB scaffolds have a significant potential to be used for tendon tissue engineering.

Current Advances towards 4-Hydroxybutyrate Containing Polyhydroxyalkanoates Production for Biomedical Applications

Polyhydroxyalkanoates (PHA) are polyesters having high promise in biomedical applications. Among different types of PHA, poly-4-hydroxybutyrate (P4HB) is the only polymer that has received FDA approval for medical applications. However, most PHA producing microorganisms lack the ability to synthesize P4HB or PHA comprising 4-hydroxybutyrate (4HB) monomer due to their absence of a 4HB monomer supplying pathway. Thus, most microorganisms require supplementation of 4HB precursors to synthesize 4HB polymers. However, usage of 4HB precursors incurs additional production cost. Therefore, researchers have adopted strategies to reduce the cost, such as utilizing low-cost substrate as well as constructing 4HB monomer supplying pathways in microorganisms. We herein summarize the biomedical applications of P4HB, the natural producers of 4HB polymer, and the various strategies that have been applied in producing 4HB polymers in non-4HB producing microorganisms. It is expected that the readers would gain a vivid idea on the different strategic developments in the field of 4HB polymer production.

Controlled Delivery of Pan-PAD-Inhibitor Cl-Amidine Using Poly(3-Hydroxybutyrate) Microspheres

This study deals with the process of optimization and synthesis of Poly(3-hydroxybutyrate) microspheres with encapsulated Cl-amidine. Cl-amidine is an inhibitor of peptidylarginine deiminases (PADs), a group of calcium-dependent enzymes, which play critical roles in a number of pathologies, including autoimmune and neurodegenerative diseases, as well as cancer. While Cl-amidine application has been assessed in a number of in vitro and in vivo models; methods of controlled release delivery remain to be investigated. P(3HB) microspheres have proven to be an effective delivery system for several compounds applied in antimicrobial, wound healing, cancer, and cardiovascular and regenerative disease models. In the current study, P(3HB) microspheres with encapsulated Cl-amidine were produced in a size ranging from ~4–5 µm and characterized for surface morphology, porosity, hydrophobicity and protein adsorption, in comparison with empty P(3HB) microspheres. Cl-amidine encapsulation in P(3HB) microspheres was optimized, and these were found to be less hydrophobic, compared with the empty microspheres, and subsequently adsorbed a lower amount of protein on their surface. The release kinetics of Cl-amidine from the microspheres were assessed in vitro and expressed as a function of encapsulation efficiency. There was a burst release of ~50% Cl-amidine in the first 24 h and a zero order release from that point up to 16 days, at which time point ~93% of the drug had been released. As Cl-amidine has been associated with anti-cancer effects, the Cl-amidine encapsulated microspheres were assessed for the inhibition of vascular endothelial growth factor (VEGF) expression in the mammalian breast cancer cell line SK-BR-3, including in the presence of the anti-proliferative drug rapamycin. The cytotoxicity of the combinatorial effect of rapamycin with Cl-amidine encapsulated P(3HB) microspheres was found to be 3.5% more effective within a 24 h period. The cells treated with Cl-amidine encapsulated microspheres alone, were found to have 36.5% reduction in VEGF expression when compared with untreated SK-BR-3 cells. This indicates that controlled release of Cl-amidine from P(3HB) microspheres may be effective in anti-cancer treatment, including in synergy with chemotherapeutic agents. Using controlled drug-delivery of Cl-amidine encapsulated in Poly(3-hydroxybutyrate) microspheres may be a promising novel strategy for application in PAD-associated pathologies.

3-Hydroxyisobutyrate dehydrogenase (HIBADH) deficiency-A novel disorder of valine metabolism

3-Hydroxyisobutyric acid (3HiB) is an intermediate in the degradation of the branched-chain amino acid valine. Disorders in valine degradation can lead to 3HiB accumulation and its excretion in the urine. This article describes the first two patients with a new metabolic disorder, 3-hydroxyisobutyrate dehydrogenase (HIBADH) deficiency, its phenotype and its treatment with a low-valine diet. The detected mutation in the HIBADH gene leads to nonsense-mediated mRNA decay of the mutant allele and to a complete loss-of-function of the enzyme. Under strict adherence to a low-valine diet a rapid decrease of 3HiB excretion in the urine was observed. Due to limited patient numbers and intrafamilial differences in phenotype with one affected and one unaffected individual, the clinical phenotype of HIBADH deficiency needs further evaluation.

Osteogenic differentiation of rat bone mesenchymal stem cells cultured on poly (hydroxybutyrate-co-hydroxyvalerate), poly (ε-caprolactone) scaffolds

Bioresorbable biomaterials can fill bone defects and act as temporary scaffold to recruit MSCs to stimulate their differentiation. Among the different bioresorbable polymers studied, this work focuses on poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) and poly(ε-caprolactone) (PCL). Were prepared blends of PHBV and PCL to obtain PHBV based biomaterials with good tenacity, important for bone tissue repair, associated with biocompatible properties of PCL. This study assesses the viability of Vero cells on scaffolds of PHBV, PCL, and their blends and the osteogenic differentiation of mesenchymal stem cells (MSCs). Materials were characterized in surface morphology, DSC and Impact Strength (IS). Vero cells and MSCs were assessed by MTT assay, cytochemical and SEM analysis. MSC osteogenic differentiation was evaluated through alizarin red staining and ALP activity. We found some roughness onto surface materials. DSC showed that the blends presented two distinct melting peaks, characteristic of immiscible blends. IS test confirmed that PHBV-PCL blends is an alternative for increase the tenacity of PHBV. MTT assay showed cells with high metabolic activities on extract toxicity test, but with low activity in the direct contact test. SEM analysis showed spreading cells with irregular and flattened morphology on different substrates. Cytochemical study revealed that MSCs maintained their morphology, although in smaller number for MSCs. The development of nodules of mineralized organic matrix in MSC cultures was identified by alizarin red staining and osteogenic differentiation was confirmed by the quantification of ALP activity. Thus, our scaffolds did not interfere on viability of Vero cells or the osteogenic differentiation of MSCs.

Tailor-Made Polyhydroxyalkanoates by Reconstructing Pseudomonas Entomophila

Microbial polyhydroxyalkanoates (PHA) containing short- and medium/long-chain-length monomers, abbreviated as SCL-co-MCL/LCL PHAs, generate suitable thermal and mechanical properties. However, SCL-co-MCL/LCL PHAs with carbon chain longer than nine are difficult to synthesize due to the low specificity of PHA synthase PhaC and the lack of either SCL- or MCL/LCL monomer precursor fluxes. This study succeeds in reprogramming a β-oxidation weakened Pseudomonas entomophila containing synthesis pathways of SCL 3-hydroxybutyryl-CoA (3HB) from glucose and MCL/LCL 3-hydroxyalkanoyl-CoA from fatty acids with carbon chain lengths from 9 to 18, respectively, that are polymerized under a low specificity PhaC_61-3 to form P(3HB-co-MCL/LCL 3HA) copolymers. Through rational flux-tuning approaches, the optimized recombinant P. entomophila accumulates 55 wt% poly-3-hydroxybutyrate in 8.4 g L^-1 cell dry weight. Combined with weakened β-oxidation, a series of novel P(3HB-co-MCL/LCL 3HA) copolymers with over 60 wt% PHA in 9 g L^-1 cell dry weight have been synthesized for the first time. P. entomophila has become a high-performing platform to generate tailor-made new SCL-co-MCL/LCL PHAs.

In vitroassessment of green polyhydroxybutyrate/chitosan blend loaded with kaempferol nanocrystals as a potential dressing for infected wounds

Despite the major medical advancements in recent decades, treating infected wounds successfully remains a challenge. In this research, a functional blend of Polyhydroxybutyrate (PHB) and Chitosan (Cs) was developed for wound infection mitigation with tailored biological and physicochemical properties. Water insoluble kaempferol (KPF) was pre-formulated to water soluble KPF nanocrystals (KPF-NCs) with fine particle size of 145 ± 11 nm, and high colloidal stability (-31 ± 0.4 mV) to improve its drug transdermal delivery. PHB-Cs-KPF-NCs (1:2 ratio) film owned the best physical properties in terms of high breathability, thermal stability and mechanical strength (33 ± 1 MPa). Besides, XRD and FTIR findings indicated the interaction between Cs, PHB and KPF, reducing the film crystallinity. The scanning electron microscopy of the film displayed a highly interconnected porous morphology. KPF-NCs were integrated in PHB-Cs matrix with a marked encapsulation efficiency of 96.6%. The enhanced drug-loading film showed a sustain release pattern of KPF-NCs over 48 h. Interestingly, the developed blend possessed an impressive blood clotting capacity within 20 min. Furthermore, we presented a new naturally-sourced mixture of Cs+KPF-NCs with powerful antibacterial effects against MDRStaphylococcus aureusandAcentibacter baumanniiat very low concentrations. The membrane evidenced a remarkable antibacterial naturein vitrowith almost 100% cell viability reduction against the study strains after 48 h. By virtue of these advantages, this green blend is highly proposed for optimal wound care.

Recent advances in the production of biomedical systems based on polyhydroxyalkanoates and exopolysaccharides

In recent years, growing attention has been devoted to naturally occurring biological macromolecules and their ensuing application in agriculture, cosmetics, food and pharmaceutical industries. They inherently have antigenicity, low immunogenicity, excellent biocompatibility and cytocompatibility, which are ideal properties for the design of biomedical devices, especially for the controlled delivery of active ingredients in the most diverse contexts. Furthermore, these properties can be modulated by chemical modification via the incorporation of other (macro)molecules in a random or controlled way, aiming at improving their functionality for each specific application. Among the wide variety of natural polymers, microbial polyhydroxyalkanoates (PHAs) and exopolysaccharides (EPS) are often considered for the development of original biomaterials due to their unique physicochemical and biological features. Here, we aim to fullfil a gap on the present associated literature, bringing an up-to-date overview of ongoing research strategies that make use of PHAs (poly (3-hydroxybutyrate), poly (3-hydroxybutyrate-co-3-hydroxyvalerate), poly (3-hydroxyoctanoate), poly(3-hydroxypropionate), poly (3-hydroxyhexanoate-co-3-hydroxyoctanoate), and poly (3-hydroxybutyrate-co-3-hydroxyhexanoate)) and EPS (bacterial cellulose, alginates, curdlan, pullulan, xanthan gum, dextran, hyaluronan, and schizophyllan) as sources of interesting and versatile biomaterials. For the first time, a monograph addressing the properties, pros and cons, status, challenges, and recent progresses regarding the application of these two important classes of biopolymers in biomedicine is presented.

Fabrication of Antiswelling Loose Nanofiltration Membranes via a "Selective-Etching-Induced Reinforcing" Strategy for Bioseparation

With diverse selectivity, higher permeance, and good antifouling property, loose polyamide nanofiltration (NF) membranes can be potentially deployed in various bioseparation applications. However, the loose NF membrane with a low crosslinking degree generally suffers from the alkali-induced pore swelling during chemical cleaning, resulting in degradation of separation performance with time. In this work, we conceive a novel strategy to tailor the separating layer through alkaline post-etching following the interfacial polymerization process, where piperazine and tannic acid (TA) were used as water-phase monomers, and trimesoyl chloride (TMC) and ferric acetylacetonate were employed as organic monomers in n-hexane. Thereinto, the polyester network formed by TA and TMC was selectively etched by alkaline treatment, thus obtaining a loose NF membrane, whose structure and performance could be facilely tailored by controlling the TA ratio and the etching pH. As a result, the well-designed loose NF membrane exhibited higher flux, better selectivity, and more stable separation performance in a long-term filtration of diluted cane molasses. Interestingly, the obtained loose NF membrane showed excellent antiswelling ability during alkaline cleaning because of network locking induced by Fe³⁺ chelation, decrease in the carboxyl proportion (more hydroxyl generation due to the ester bond hydrolysis), and enhanced interface interaction between the separation layer and the sublayer attributed to catechol adhesion effect. Therefore, such a "selective-etching-induced reinforcing" strategy could endow the polyamide NF membrane with both loose and antiswelling separation layer in a reliable and scalable way, which provides a new perspective for preparing highly selective and stable NF membrane for resource recovery.

Rational engineering of the Plasmodium falciparuml-lactate dehydrogenase loop involved in catalytic proton transfer to improve chiral 2-hydroxybutyric acid production

l-lactate dehydrogenases (LDHs) has been widely studied for their ability to reduce 2-keto acids for the production of 2-hydroxy acids, whereby 2-hydroxybutyric acids (2-HBA) is among the most important fundamental building blocks for synthesizing pharmaceuticals and biodegradable materials. However, LDHs usually show low activity towards 2-keto acids with longer side chain such as 2-oxobutyric acid (2-OBA). Here rational engineering of the Plasmodium falciparum LDH loop with residue involved in the catalytic proton transfer was initially studied. By combining homology alignment and structure-based design approach, we found that changing the charge characteristics or hydrogen bond network interactions of this loop could improve enzymatic catalytic activities and stabilities towards 2-OBA. Compared with wild type, variant N197D_ldh showed 1.15 times higher activity and 2.73 times higher K_cat/Km. The half-life of variant N197D_ldh at 40 °C increased to 77.9 h compared with 50.4 h of wild type. Furthermore, asymmetric synthesis of (S)-2-HBA with coenzyme regeneration revealed 95.8 g/L production titer within 12 h for variant N197D_ldh, 2.05 times higher than using wild type. Our study indicated the importance of loop with residues involved in the catalytic proton transfer process, and the engineered LDH would be more suitable for (S)-2-HBA production.

S-Nitrosoglutathione-Based Nitric Oxide-Releasing Nanofibers Exhibit Dual Antimicrobial and Antithrombotic Activity for Biomedical Applications

The novel use of nanofibers as a physical barrier between blood and medical devices has allowed for modifiable, innovative surface coatings on devices ordinarily plagued by thrombosis, delayed healing, and chronic infection. In this study, the nitric oxide (NO) donor S-nitrosoglutathione (GSNO) is blended with the biodegradable polymers polyhydroxybutyrate (PHB) and polylactic acid (PLA) for the fabrication of hemocompatible, antibacterial nanofibers tailored for blood-contacting applications. Stress/strain behavior of different concentrations of PHB and PLA is recorded to optimize the mechanical properties of the nanofibers. Nanofibers incorporated with different concentrations of GSNO (10, 15, 20 wt%) are evaluated based on their NO-releasing kinetics. PLA/PHB + 20 wt% GSNO nanofibers display the greatest NO release over 72 h (0.4-1.5 × 10-10  mol mg-1 min-1 ). NO-releasing fibers successfully reduce viable adhered bacterial counts by ≈80% after 24 h of exposure to Staphylococcus aureus. NO-releasing nanofibers exposed to porcine plasma reduce platelet adhesion by 64.6% compared to control nanofibers. The nanofibers are found noncytotoxic (>95% viability) toward NIH/3T3 mouse fibroblasts, and 4',6-diamidino-2-phenylindole and phalloidin staining shows that fibroblasts cultured on NO-releasing fibers have improved cellular adhesion and functionality. Therefore, these novel NO-releasing nanofibers provide a safe antimicrobial and hemocompatible coating for blood-contacting medical devices.

Maximizing PHB content in Synechocystis sp. PCC 6803: a new metabolic engineering strategy based on the regulator PirC

BACKGROUND

PHB (poly-hydroxy-butyrate) represents a promising bioplastic alternative with good biodegradation properties. Furthermore, PHB can be produced in a completely carbon-neutral fashion in the natural producer cyanobacterium Synechocystis sp. PCC 6803. This strain has been used as model system in past attempts to boost the intracellular production of PHB above ~ 15% per cell-dry-weight (CDW).

RESULTS

We have created a new strain that lacks the regulatory protein PirC (product of sll0944), which exhibits a higher activity of the phosphoglycerate mutase resulting in increased PHB pools under nutrient limiting conditions. To further improve the intracellular PHB content, two genes involved in PHB metabolism, phaA and phaB, from the known producer strain Cupriavidus necator, were introduced under the control of the strong promotor PpsbA2. The resulting strain, termed PPT1 (ΔpirC-REphaAB), produced high amounts of PHB under continuous light as well under a day-night regime. When grown in nitrogen and phosphorus depleted medium, the cells produced up to 63% per CDW. Upon the addition of acetate, the content was further increased to 81% per CDW. The produced polymer consists of pure PHB, which is highly isotactic.

CONCLUSION

The amounts of PHB achieved with PPT1 are the highest ever reported in any known cyanobacterium and demonstrate the potential of cyanobacteria for a sustainable, industrial production of PHB.

Supernucleation, crystalline structure and thermal stability of bacterially synthesized poly(3-hydroxybutyrate) polyester tailored by thymine as a biocompatible nucleating agent

Naturally occurring thymine (TM) was incorporated into bacterial poly(3-hydroxybutyrate) (PHB) polyester to fabricate a novel and green biocomposite. Both 0.5% and 1% TM exhibit supernucleation effect on PHB, and crystallization kinetics suggests TM significantly increased T_c and X_c, and substantially shortened t_1/2 of PHB. Epitaxial nucleation caused by a perfect crystal lattice matching between PHB and TM, was proposed to elucidate nucleation mechanism of PHB. Hydrogen bond interaction exists between CO, C-O-C groups of PHB and -CH₃ (or -CH)/-NH- group of TM. TM interacted with CO group of PHB crystalline phase rather than that of amorphous one. In addition, two new IR crystalline bands assigned to C-O-C group of PHB appeared in the presence of TM, which arises from shift of two amorphous ones, respectively. TM enhanced onset thermal degradation temperature of PHB, mainly attributed to increased degree of crystallinity of PHB and flame retardance effect of TM.

Bioplastic production by feeding the marine Rhodovulum sulfidophilum DSM-1374 with four different carbon sources under batch, fed-batch and semi-continuous growth regimes

In the present study, the ability of the marine bacterium Rhodovulum sulfidophilum DSM-1374 to convert, via photo-fermentative process, certain organic acids such as single carbon source (acetate, lactate, malate and succinate) into polyhydroxyalkanoate accumulations within bacterial cells is evaluated. The main goal of the investigation was poly-3-hydroxybutyrate (P3HB) synthesis by a photo-fermentative process. Of the four carbon sources, only succinate simultaneously produced P3HB and H₂ (268 mg/L and 1085 mL/L respectively). Malate was the least productive source for P3HB; the other carbon sources (acetate and lactate) produced a significant amount of polymer (596 mg P3HB/L for acetate and 716 mg P3HB/L for lactate) when R. sulfidophilum was cultured in batch growth conditions. Cumulative P3HB increased significantly when the bacterium was grown under two steps: nutrient sufficient conditions (step 1) followed by macronutrient deficient conditions (step 2). The highest cumulative P3HB was observed at the end of step 2 (1000 mg/L) when R. sulfidophilum was fed with lactate under phosphorus starvation. When grown over 1200 h, under a semi-continuous regimen, the harvested dry-biomass reached a constant content of P3HB (39.1 ± 1.6 % of cell dry-weight), in the semi-steady state condition. Since lactate is an abundant byproduct of world industries, it can be used to mitigate the environmental impact in a modern circular bio-economy.

Combination of carotenoids from Spirulina and PLA/PLGA or PHB: New options to obtain bioactive nanoparticles

The use of poly-β-hydroxybutyrate (PHB) is an alternative polymer that can be considered environment friendly and renewable to prepare nanoparticles of carotenoids. This study aimed to develop and characterize aqueous dispersion nanoparticles and lyophilized nanoparticles of carotenoid extract obtained from Spirulina sp. LEB 18 by nanoprecipitation, using poly _d,l-lactic acid (PLA)/poly _d,l-lactic-co-glycolic acid (PLGA) (75:25 w/w) or PHB as encapsulants. The samples were characterized for the particle size, polydispersity index, zeta potential, apparent viscosity, pH, color parameters, ultraviolet-visible (UV/Vis) spectrophotometry, carotenoid profile, encapsulation efficiency, morphology, and thermal analysis. Nanoparticles containing microalgae carotenoid extract showed average particle diameter on a nanoscale (<200 nm), high homogeneity and stability, high thermal stability, and encapsulation efficiency carotenoid (>80%) when compared to nanoparticles containing β-carotene synthetic. PHB or PLA/PLGA as encapsulating material in the production of nanoparticles from microalgae carotenoids can be a polymeric alternative capable of promoting greater stability and application of carotenoids.

Stable and efficient immobilization of bi-enzymatic NADPH cofactor recycling system under consecutive microwave irradiation

One of the challenges in biocatalysis is the development of stable and efficient bi-enzymatic cascades for bio-redox reactions coupled to the recycling of soluble cofactors. Aldo-keto reductase (LEK) and glucose dehydrogenase (GDH) can be utilized as the NADPH recycling system for economic and efficient biocatalysis of (R)-4-chloro-3-hydroxybutanoate ((R)-CHBE), an important chiral pharmaceutical intermediate. The LEK and GDH was efficiently co-immobilized in mesocellular siliceous foams (MCFs) under microwave irradiation (CoLG-MIA). while they were also co-immobilized by entrapment in calcium alginate without MIA as control (CoLG-CA). The relative activity of CoLG-MIA was increased to 140% compared with that of free LEK. The CoLG-MIA exhibited a wider range of pH and temperature stabilities compared with other preparations. The thermal, storage and batch operational stabilities of microwave-assisted immobilized LEK-GDH were also improved. The NADPH recycling system exhibited the potential as the stable and efficient catalyst for the industrial preparation of (R)-CHBE.

Influence of inoculum variation and nutrient availability on polyhydroxybutyrate production from activated sludge

Carbon recovery through polyhydroxybutyrate (PHB) production can create a value-added waste management system. Activated sludge as inoculum enables PHB production using cheap and renewable carbons source, bringing PHB at par to conventional plastics. The PHB accumulating potential of activated sludge needs to be improved to realize the objective. The interaction between the origin of activated sludge, petroleum refinery sludge and brewery sludge, and nitrogen availability was explored to effect culture enrichment, improve PHB accumulation, and polymer characteristics through aerobic dynamic feeding. Consequently, nitrogen excess and limitation enrichment of both sludges produced mix microbial culture with adequate PHB storage of 7.8 ± 0.05%, 14.4 ± 0.04%, 14.4 ± 0.04%, 13.4 ± 0.02% respectively. Batch accumulation revealed higher PHB accumulation of 76.1 ± 0.03% and 71.7 ± 0.05% under nitrogen limitation for PRS and BS enriched under nitrogen excess condition compared to any other combination. The higher decomposition temperature of 285 °C, 293 °C, and a lower melting point of 168 °C, 165 °C with a higher molecular weight of 4.3x10⁵g/mol and semi-crystalline arrangement indicates the potential applications for extracted PHB. PHB production enhanced under nitrogen limited conditions with culture enriched under nitrogen excess condition. However, similar PHB storage, physiochemical property, and overlapping microbial community show an insignificant effect of sludge origin on PHB production.

Biological effects of the free and embedded metribuzin and tribenuron-methyl herbicides on various cultivated weed species

The present study addresses the herbicidal activity and biological effects of the metribuzin (MET) and tribenuron-methyl (TBM) herbicides used to control various weed species (Amaranthus retroflexus, Sinapis arvensis, and Leucanthemum maximum). The effects of the free herbicides and the herbicides embedded in granules of degradable polymer poly-3-hydroxybutyrate [P(3HB)] blended with birch wood flour were compared. Metribuzin, regardless of the form, caused 100% mortality of the three weeds by day 21. The herbicidal activity of tribenuron-methyl was lower than that of metribuzin, but the embedded TBM was superior to the free herbicide in the length and strength of its action on the weeds. Both metribuzin forms dramatically decreased the main parameters of fluorescence: maximum quantum yield of photosystem-II [Y(II)_max], maximum quantum yield of non-photochemical quenching [Y(NPQ)_max], and maximum rate of non-cyclic electron transport [ETR_max] and concentrations of chlorophyll a and b. The effect of the embedded TBM on the photosynthetic activity of the weeds was lower in the first two weeks of the growth of herbicide-treated plants but lasted longer than the effect of the free TBM and increased over time. Embedding of metribuzin in the matrix of degradable blend did not decrease its herbicidal activity.

Mass spectrometry in bioresorbable polymer development, degradation and drug-release tracking

A detailed characterization of polymeric matrices and appropriate degradation monitoring techniques are required to sustain the development of new materials as well as to enlarge the applications of the old ones. In fact, polymer analysis is essential for the clarification of the intrinsic relationship between structure and properties that ascertains the industrial applications in diverse fields. In bioresorbable and biodegradable polymers, the role of analytical methods is dual since it is pointed both at the polymeric matrices and at degradation tracking. The structural architectures, the mechanical and morphological properties, and the degradation rate, are of outstanding importance for a specific application. In some cases, the complexity of the polymer structure, the processes of decomposition or the low concentration of the degradation products need the concurrent use of different complementary analytical techniques to give detailed information of the reactions taking place. Several analytical methods are used in bioresorbable polymer development and degradation tracking. Among them, mass spectrometry (MS) plays an essential role and it is used to refine polymer syntheses, for its high sensitivity, to highlight degradation mechanism by detecting compounds present in trace amounts, or to track the degradation product profile and to study drug release. In fact, elucidation of reaction mechanisms and polymer structure, attesting to the purity and detecting defects as well as residual catalysts, in biodegradable and bioresorbable polymers, requires sensitive analytical characterization methods that are essential in providing an assurance of safety, efficacy and quality. This review aims to provide an overview of the MS strategies used to support research and development of resorbable polymers as well as to investigate their degradation mechanisms. It is focused on the most significant studies concerning synthetic bioresorbable matrices (polylactide, polyglycolide and their copolymers, polyhydroxybutyrate, etc.), published in the last ten years.

Bioplastic (poly-3-hydroxybutyrate) production by the marine bacterium Pseudodonghicola xiamenensis through date syrup valorization and structural assessment of the biopolymer

Biobased degradable plastics have received significant attention owing to their potential application as a green alternative to synthetic plastics. A dye-based procedure was used to screen poly-3-hydroxybutyrate (PHB)-producing marine bacteria isolated from the Red Sea, Saudi Arabia. Among the 56 bacterial isolates, Pseudodonghicola xiamenensis, identified using 16S rRNA gene analyses, accumulated the highest amount of PHB. The highest PHB production by P. xiamenensis was achieved after 96 h of incubation at pH 7.5 and 35 °C in the presence of 4% NaCl, and peptone was the preferred nitrogen source. The use of date syrup at 4% (w/v) resulted in a PHB concentration of 15.54 g/L and a PHB yield of 38.85% of the date syrup, with a productivity rate of 0.162 g/L/h, which could substantially improve the production cost. Structural assessment of the bioplastic by Fourier transform infrared spectroscopy and nuclear magnetic resonance spectroscopy revealed the presence of methyl, hydroxyl, methine, methylene, and ester carbonyl groups in the extracted polymer. The derivative products of butanoic acid estimated by gas chromatography-mass spectrometry [butanoic acid, 2-amino-4-(methylseleno), hexanoic acid, 4-methyl-, methyl ester, and hexanedioic acid, monomethyl ester] confirmed the structure of PHB. The present results are the first report on the production of a bioplastic by P. xiamenensis, suggesting that Red Sea habitats are a potential biological reservoir for novel bioplastic-producing bacteria.

Development of Optimized Strategies for Growth Factor Incorporation onto Electrospun Fibrous Scaffolds To Promote Prolonged Release

Growth factor incorporation in biomedical constructs for their local delivery enables specific pharmacological effects such as the induction of cell growth and differentiation. This has enabled a promising way to improve the tissue regeneration process. However, it remains challenging to identify an appropriate approach that provides effective growth factor loading into biomedical constructs with their following release kinetics in a prolonged manner. In the present work, we performed a systematic study, which explores the optimal strategy of growth factor incorporation into sub-micrometric-sized CaCO₃ core-shell particles (CSPs) and hollow silica particles (SiPs). These carriers were immobilized onto the surface of the polymer scaffolds based on polyhydroxybutyrate (PHB) with and without reduced graphene oxide (rGO) in its structure to examine the functionality of incorporated growth factors. Bone morphogenetic protein-2 (BMP-2) and ErythroPOietin (EPO) as growth factor models were included into CSPs and SiPs using different entrapping strategies, namely, physical adsorption, coprecipitation technique, and freezing-induced loading method. It was shown that the loading efficiency, release characteristics, and bioactivity of incorporated growth factors strongly depend on the chosen strategy of their incorporation into delivery systems. Overall, we demonstrated that the combination of scaffolds with drug delivery systems containing growth factors has great potential in the field of tissue regeneration compared with individual scaffolds.

The Dissociation Rate of Acetylacetonate Ligands Governs the Size of Ferrimagnetic Zinc Ferrite Nanocubes

Magnetic nanoparticles are critical to a broad range of applications from medical diagnostics and therapeutics to biotechnological processes and single-molecule manipulation. To advance these applications, facile and robust routes to synthesize highly magnetic nanoparticles over a wide size range are needed. Here, we demonstrate that changing the degassing temperature of thermal decomposition of metal acetylacetonate precursors from 90 to 25 °C tunes the size of ferrimagnetic Zn_xFe_3-xO₄ nanocubes from 25 to 100 nm, respectively. We show that degassing at 90 °C nearly entirely removes acetylacetone ligands from the reaction, which results in an early formation of monomers and a reaction-controlled growth following LaMer's model toward small nanocubes. In contrast, degassing at 25 °C only partially dissociates acetylacetone ligands from the metal center and triggers a delayed formation of monomers, which leads to intermediate assembled structures made of tiny irregular crystallites and an eventual formation of large nanocubes via a diffusion-controlled growth mechanism. Using complementary techniques, we determine the substitution fraction x of Zn²⁺ to be in the range of 0.35-0.37. Our method reduces the complexity of the thermal decomposition method by narrowing the synthesis parameter space to a single physical parameter and enables fabrication of highly magnetic and uniform zinc ferrite nanocubes over a broad size range. The resulting particles are promising for a range of applications from magnetic fluid hyperthermia to actuation of macromolecules.

Production, purification and evaluation of biodegradation potential of PHB depolymerase of Stenotrophomonas sp. RZS7

There are numerous reports on poly-β-hydroxybutyrate (PHB) depolymerases produced by various microorganisms isolated from various habitats, however, reports on PHB depolymerase production by an isolate from plastic rich sites scares. Although PHB has attracted commercial significance, the inefficient production and recovery methods, inefficient purification of PHB depolymerase and lack of ample knowledge on PHB degradation by PHB depolymerase have hampered its large scale commercialization. Therefore, to ensure the biodegradability of biopolymers, it becomes imperative to study the purification of the biodegrading enzyme system. We report the production, purification, and characterization of extracellular PHB depolymerase from Stenotrophomonas sp. RZS7 isolated from a dumping yard rich in plastic waste. The isolate produced extracellular PHB depolymerase in the mineral salt medium (MSM) at 30°C during 4 days of incubation under shaking. The enzyme was purified by three methods namely ammonium salt precipitation, column chromatography, and solvent purification. Among these purification methods, the enzyme was best purified by column chromatography on the Octyl-Sepharose CL-4B column giving optimum yield (0.7993 Umg^-1mL^-1). The molecular weight of purified PHB depolymerase was 40 kDa. Studies on the assessment of biodegradation of PHB in liquid culture medium and under natural soil conditions confirmed PHB biodegradation potential of Stenotrophomonas sp. RZS7. The results obtained in Fourier-Transform Infrared (FTIR) analysis, High-Performance Liquid Chromatography (HPLC) study and Gas Chromatography Mass-Spectrometry (GC-MS) analysis confirmed the biodegradation of PHB in liquid medium by Stenotrophomonas sp. RZS7. Changes in surface morphology of PHB film in soil burial as observed in Field Emission Scanning Electron Microscopy (FESEM) analysis confirmed the biodegradation of PHB under natural soil environment. The isolate was capable of degrading PHB and it resulted in 87.74% biodegradation. A higher rate of degradation under the natural soil condition is the result of the activity of soil microbes that complemented the biodegradation of PHB by Stenotrophomonas sp. RZS7.

Hybrid nanobiocomposites based on poly(3-hydroxybutyrate) - characterization, thermal and mechanical properties

Poly(3-hydroxybutyrate) is a biopolymer used to production of implants in the human body. On the other hand, the physical and mechanical properties of poly(3-hydroxybutyrate) are compared to the properties of isotactic polypropylene what makes poly(3-hydroxybutyrate) possible substitute for polypropylene. Unfortunately, the melting point of poly(3-hydroxybutyrate) is almost equal to its degradation temperature what gives very narrow window of its processing conditions. Therefore, numerous attempts are being made to improve the poly(3-hydroxybutyrate) properties. In the present work, hybrid nanobiocomposites based on poly(3-hydroxybutyrate) as a matrix with the use of organic nanoclay - Cloisite 30B and linear polyurethane as a second filler have been manufactured. The linear polyurethane was based on diphenylmethane 4,4'-diisocyanate and diol with imidazoquinazoline rings. The obtained nanobiocomposites were characterized by X-ray diffraction, scanning and transmission electron microscopies, thermogravimetry, differential scanning calorimetry and their selected mechanical properties were tested. The resulting hybrid nanobiocomposites have intercalated/exfoliated structure. The nanobiocomposites are characterized by a higher thermal stability and a wider range of processing temperatures compared to the unfilled matrix. The plasticizing influence of nanofillers was also observed. In addition, the mechanical properties of the discussed nanobiocomposites were examined and compared to those of the unfilled poly(3-hydroxybutyrate). The new-obtained nanobiocomposites based on poly(3-hydroxybutyrate) containing 1% Cloisite 30B and 5 wt. % of the linear of polyurethane characterized the highest improvement of processing conditions. They have the biggest difference between the temperature of degradation and the onset melting temperature, about 100 °C.

Production and Characterization of Bioplastic by Polyhydroxybutyrate Accumulating Erythrobacter aquimaris Isolated from Mangrove Rhizosphere

The synthesis of bioplastic from marine microbes has a great attendance in the realm of biotechnological applications for sustainable eco-management. This study aims to isolate novel strains of poly-β-hydroxybutyrate (PHB)-producing bacteria from the mangrove rhizosphere, Red Sea, Saudi Arabia, and to characterize the extracted polymer. The efficient marine bacterial isolates were identified by the phylogenetic analysis of the 16S rRNA genes as Tamlana crocina, Bacillus aquimaris, Erythrobacter aquimaris, and Halomonas halophila. The optimization of PHB accumulation by E. aquimaris was achieved at 120 h, pH 8.0, 35 °C, and 2% NaCl, using glucose and peptone as the best carbon and nitrogen sources at a C:N ratio of 9.2:1. The characterization of the extracted biopolymer by Fourier-transform infrared spectroscopy (FTIR), Nuclear magnetic resonance (NMR), and Gas chromatography-mass spectrometry (GC-MS) proves the presence of hydroxyl, methyl, methylene, methine, and ester carbonyl groups, as well as derivative products of butanoic acid, that confirmed the structure of the polymer as PHB. This is the first report on E. aquimaris as a PHB producer, which promoted the hypothesis that marine rhizospheric bacteria were a new area of research for the production of biopolymers of commercial value.

A Carotenoid- and Poly-β-Hydroxybutyrate-Free Mutant Strain of Sphingomonas elodea ATCC 31461 for the Commercial Production of Gellan

Gellan gum is a microbial exopolysaccharide, produced after aerobic fermentation using the Gram-negative bacterium strain Sphingomonas elodea ATCC 31461. Due to its unique structure and excellent physical characteristics, gellan gum has a broad range of applications in food, pharmaceutical, and other industries where it is used for stabilizing, emulsifying, thickening, and suspending. During the fermentative production of gellan, strain ATCC 31461 also accumulates large amounts of the metabolic by-products yellow carotenoid pigments and poly-β-hydroxybutyrate (PHB), which is decreasing the gellan production and increasing processing costs. A pigment PHB-free mutant was obtained by knocking out the phytoene desaturase gene (crtI) in the carotenoid biosynthetic pathway and the phaC gene, encoding a PHB synthase for the polymerization of PHB. Unfortunately, the double gene knockout mutant produced only 0.56 g liter-1 gellan. Furthermore, blocking PHB and carotenoid synthesis resulted in the accumulation of pyruvate, which reduced gellan production. To elevate gellan production, combined UV irradiation and ethyl methanesulfonate (EMS) mutagenesis treatment were used. A mutant strain with the same level of pyruvate as that of the wild-type strain and higher gellan production was isolated (1.35 g liter-1, 132.8% higher than the double gene knockout mutant and 14.4% higher than the wild-type strain ATCC 31461). In addition, a new gellan gum recovery method based on the new mutant strain was investigated, in which only 30% isopropanol was required, which is twice for the wild-type strains, and the performance of the final product was improved. Thus, the mutant strain could be an ideal strain for the commercial production of gellan.IMPORTANCE A carotenoid- and PHB-free double gene knockout strain mutant was constructed to simplify the purification steps normally involved in gellan production. However, the production of gellan gum was unexpectedly reduced. A mutant with 14.4% higher gellan production than that of the wild-type strain was obtained and isolated after employing UV and EMS combined mutagenesis. Based on this high-yield and low-impurity-producing mutant, a new recovery method requiring less organic solvent and fewer operating steps was developed. This method will effectively reduce the production costs and improve the economic benefits of large-scale gellan production.

Constructing Slow-Release Fungicide Formulations Based on Poly(3-hydroxybutyrate) and Natural Materials as a Degradable Matrix

Slow-release fungicide formulations (azoxystrobin, epoxiconazole, and tebuconazole) shaped as pellets and granules in a matrix of biodegradable poly(3-hydroxybutyrate) and natural fillers (clay, wood flour, and peat) were constructed. Infrared spectroscopy showed no formation of chemical bonds between components in the experimental formulations. The formulations of pesticides had antifungal activity against Fusarium verticillioides in vitro. A study of biodegradation of the experimental fungicide formulations in the soil showed that the degradation process was mainly influenced by the type of formulation without significant influence of the type of filler. More active destruction of the granules led to a more rapid accumulation of fungicides in the soil. The content of fungicides present in the soil as a result of degradation of the formulations and fungicide release was determined by their solubility. Thus, all formulations are able to function in the soil for a long time, ensuring gradual and sustained delivery of fungicides.

Combined effect of cellulose nanocrystals, carvacrol and oligomeric lactic acid in PLA_PHB polymeric films

Biodegradable multicomponent films based on poly(lactic acid) (PLA) and poly(3-hydroxybutyrate) (PHB) plasticized with oligomeric lactic acid (OLA), reinforced with synthetized cellulose nanocrystals (CNC) and modified by a natural additive with antimicrobial activity (carvacrol) were formulated and processed by extrusion. Morphological, mechanical, thermal, migration and barrier properties were tested to determine the effect of different components in comparison with neat poly(lactic acid). Results showed the positive effect of CNC in the five components based films, with the increase of the Young's modulus of the PLA_PHB_10Carv_15OLA, associated with an increase in the elongation at break (from 150% to 410%), by showing an OTR reduction of 67%. Disintegrability in compost conditions and enzymatic degradation were tested to evaluate the post-use of these films. All formulations disintegrated in less than 17 days, while proteinase K preferentially degraded the amorphous regions, and crystallinity degree of the nanocomposite films increased as a consequence of enzyme action.