Effect of reciprocating agitation thermal processing (RA-TP) on quality of canned tomato (Solanum lycopersicum) puree

BACKGROUND

Reciprocating agitation thermal processing (RA-TP) is a recent innovation in the field of canning for obtaining high-quality canned food. The objective of this study was to compare RA-TP processing with conventional non-agitated (still) processing with respect to the impact on quality (color, antioxidant capacity, total phenols, carotenoid and lycopene contents) of canned tomato (Solanum lycopersicum) puree.

RESULTS

Owing to a 63-81% reduction in process times as compared with still processing, tomato puree with a brighter red color (closer to fresh) was obtained during RA-TP. At 3 Hz reciprocation frequency, the loss of antioxidant, lycopene and carotenoid contents could be reduced to 34, 8 and 8% respectively as compared with 96, 41 and 52% respectively during still processing. In fact, the phenolic content for RA-TP at 3 Hz was 5% higher than in fresh puree. Quality retention generally increased with an increase in frequency, although the differences were less significant at higher reciprocation frequencies (between 2 and 3 Hz).

CONCLUSION

Research findings indicate that RA-TP can be effective to obtain thermally processed foods with high-quality attribute retention. It can also be concluded that a very high reciprocation frequency (>3 Hz) is not necessarily needed and significant quality improvement can be obtained at lower frequencies (∼2 Hz). © 2016 Society of Chemical Industry.

Using Liquid-Only Cans (Equipped with a Single Particle) to Quantify Heat Transfer Phenomenon During Thermal Processing

This study utilizes liquid-only cans (fitted with a single particle) to gain insight into the heat transfer phenomenon during the novel process of reciprocating agitation thermal processing (RA-TP) for sterilization of food. Overall heat transfer coefficient (U) across the can-wall was evaluated for cylindrical cans, filled with different concentration of glycerin and treated with reciprocating agitation thermal processing (RA-TP). Thermocouple-equipped single spherical particle (diameter = 0.019 m) of various densities were also kept inside the cans to obtain preliminary insights into the heat transfer phenomenon at the liquid–particle interface (hfp). Seven process variables, viz. operating temperature (110–130 °C), reciprocation frequency (1–4 Hz), reciprocation amplitude (0.05–0.25 m), can headspace (0.006–0.012 m), liquid viscosity (0.001–0.942 Pa.s) and particle density (830–2,210 kg/m3), were varied according to three full-factorial designs and corresponding U & hfp were reported. Depending on the processing condition and product composition, U and hfp varied in the range 197–1,240 W/m2K and 210–1,230 W/m2K respectively. Higher heat transfer was observed at both can wall and liquid–particle interface with increasing temperature, headspace, frequency and amplitude and decreasing liquid viscosity. The order of heat transfer coefficients for processing conditions was: Frequency > amplitude > headspace > temperature; while for product composition was: Frequency > liquid viscosity > product density. This study is relevant for providing data for process modeling of reciprocating agitation thermal processing.

Studies on alterations of clinical and hemato-biochemical parameters before and after treatment in calves naturally infected with theileriosis

Aim:

The aim was to determine hemato-biochemical alterations and to determine the better treatment of theileriosis in naturally infected calves.

Materials and Methods:

A total of 74 Holstein crossbred calves below 6 months of age, of either sex were included for present investigation in Bikaner. Based on the clinical examinations and laboratory results, 20 calves included for hemato-biochemical studies (before and after treatment) and divided into two groups (having 10 calves each).

Results:

The clinical examination of these calves revealed weakness, ticks infestations, high fever above 104°F, pronounced swelling of prescapular, prefemoral, parotid lymph nodes, loss of elasticity of skin, anemia, lacrimal discharges, pulpy cornea, tachycardia, and dyspnea. There was highly significant decrease (p<0.01) in hemoglobin, total erythrocyte count, packed cell volume and total leukocyte count, serum glucose, total protein, globulin and albumin level and highly significant increase in aspartate aminotransferase and alanine aminotransferase level as compared to healthy control animals in Group I and II. The animals of Group II treated with buparvaquone along with single blood transfusion shows better recovery then animals of Group I treated with bupavaqone and hematinic.

Conclusions:

Significant changes were found in hemato-biochemical parameters in theileria affected calves before treatment as compare to healthy control calves. Significant improvement was observed in hemato-biochemical parameters in buparvaquone and single blood transfusion treated calves as compare to another group, so it is concluded that buparvaquone and single blood transfusion is better combination for treatment of theileriosis.

Quality Retention Enhancement in Canned Potato and Radish Using Reciprocating Agitation Thermal Processing

This study focusses on evaluating the effects of reciprocating agitation thermal processing (RA-TP) on the quality of canned potato cubes and whole radish packed in brine solution (1 % NaCl+1 % CaCl2 solution). Experimental cans were subjected to RA-TP in a lab-scale steam retort at different temperatures (110–130 °C) and reciprocation frequencies (0–3 Hz). Color, texture, antioxidant activity and solids leached into the liquid were evaluated to characterize the quality of processed product. RA-TP resulted in superior quality retention in processed vegetables as compared to static retort (0 Hz) due to the associated shorter (up to 70 %) process times. In general, higher operating temperatures and reciprocation frequencies resulted in better retention of color and antioxidant activity. However, RA-TP also increased texture damage and nutrients/solids leaching, but these negative effects were milder at higher process temperatures. Therefore, high-temperature and high agitation frequency RA-TP concept with shorter process time could be effectively used for better quality retention. The optimal product quality was obtained at 130 °C retort temperature and 3.0 Hz reciprocation frequency for whole radish and at 130 °C retort temperature and 1.5 Hz reciprocation frequency for potato cubes.

A Controlled Agitation Process for Improving Quality of Canned Green Beans during Agitation Thermal Processing

This work introduces the concept of a controlled agitation thermal process to reduce quality damage in liquid-particulate products during agitation thermal processing. Reciprocating agitation thermal processing (RA-TP) was used as the agitation thermal process. In order to reduce the impact of agitation, a new concept of "stopping agitations after sufficient development of cold-spot temperature" was proposed. Green beans were processed in No. 2 (307×409) cans filled with liquids of various consistency (0% to 2% CMC) at various frequencies (1 to 3 Hz) of RA-TP using a full-factorial design and heat penetration results were collected. Corresponding operator's process time to impart a 10-min process lethality (Fo ) and agitation time (AT) were calculated using heat penetration results. Accordingly, products were processed again by stopping agitations as per 3 agitation regimes, namely; full time agitation, equilibration time agitation, and partial time agitation. Processed products were photographed and tested for visual quality, color, texture, breakage of green beans, turbidity, and percentage of insoluble solids in can liquid. Results showed that stopping agitations after sufficient development of cold-spot temperatures is an effective way of reducing product damages caused by agitation (for example, breakage of beans and its leaching into liquid). Agitations till one-log temperature difference gave best color, texture and visual product quality for low-viscosity liquid-particulate mixture and extended agitations till equilibration time was best for high-viscosity products. Thus, it was shown that a controlled agitation thermal process is more effective in obtaining high product quality as compared to a regular agitation thermal process.

Identifying factors affecting age at first semen freezing and age at first semen use in Sahiwal bulls

Aim:

The objective of the study was to evaluate the effects of non-genetic factors on reproduction traits viz. age at first semen freezing and age at first semen use of breeding bulls in Sahiwal bulls by fitting least-squares analysis.

Materials and Methods:

The information on reproduction traits of 43 Sahiwal breeding bulls belonging to 8 sets of Sahiwal breeding program at Indian Council of Agricultural Research-National Dairy Research Institute (ICAR-NDRI), Karnal (Haryana), India during 27 years (1987-2013) were analyzed using fixed linear model. The information was collected from AI records, reproduction sheets, and bull AI register maintained at different sections of Institute viz. record room of Dairy Cattle Breeding Division (DCB), Cattle Yard, Artificial Breeding Research Centre, ICAR-NDRI, Karnal.

Results:

The average age at first semen freezing and age at first semen use of Sahiwal breeding bulls was estimated as 3.17±0.01 years and 5.35±0.01 years, with the coefficient of variation 18.93% and 20%, respectively. The overall least-squares mean for age at first semen freezing and age at first semen use was estimated as 3.14±0.09 years and 5.25±0.02 years, respectively, in Sahiwal breeding bulls. Period of freezing/use had significant effects on reproductive traits (p<0.01). Season had no significant effect on any of the traits considered in this study.

Conclusion:

It can be concluded that management inputs such as nutrition, breeding, and optimum environment should be taken care of to optimize age at first semen freezing and age at first semen use for better utilization of superior germplasm.

Optimizing age of bull at first use in relation to fertility of Murrah breeding bulls

Aim:

The aim of the present investigation was to optimize the age at first use (AAFU) of semen of Murrah breeding bulls, which will help in early selection of bulls under progeny testing program for improving the reproductive performance in the herd.

Materials and Methods:

The data on AAFU, conception rate based on first A.I. (CRFAI), overall conception rate (OCR), and birth weight (B.WT) of 57 Murrah bulls during 1993-2014 at NDRI center pertaining to 14 sets of Network Project on Buffalo Improvement at ICAR-National Dairy Research Institute, Karnal, Haryana, India were adjusted for significant environmental influences and subsequently analyzed. Simple and multiple regression models were used for prediction of CRFAI and OCR of Murrah breeding bulls. Comparative evaluation of three developed models (I-III) showed that Model III, having AAFU and B.WT, fulfill the accuracy of model as revealed by high coefficient of determination, low mean sum of squares due to error, low conceptual predictive value, and low Bayesian information criterion.

Results:

The results revealed that the average predicted CRFAI was highest (39.95%) at <3.5 years and lowest (34.87%) at >4.5 years of age at first A.I/use. Similarly, average predicted OCR was highest (41.05%) at <3.5 years and lowest (39.42%) at >4.5 years of age at first A.I/use of Murrah bulls.

Conclusion:

In organized herd under progeny testing program, Murrah bulls should be used at young age, i.e. prior to 3.5 years, which is expected to result in 5.08% better CRFAI and 1.63% better OCR in comparison to Murrah bulls used after 4.5 years of age.

Incidence and profile of C3 Glomerulopathy: A single center study

C3 glomerulopathy has recently been described as a distinct entity. The underlying mechanism is unregulated activation of the alternate pathway of the complement system. The most common presentation is with an acute nephritic syndrome. The diagnosis is made on immunofluoroscence by the presence of isolated or dominant C3 staining. In this retrospective study, renal biopsy data were collected from 2010 to 2013 patients with C3 glomerulopathy identified and their clinical and biochemical parameters analyzed. Out of 514 biopsies available for analysis, the incidence of C3 glomerulopathy was 1.16% (n = 6). The mean age of the presentation was 26 years and the average estimated glomerular filtration rate was 30.65 ml/min/1.73 m(2). The most common histopathological pattern was membranoproliferative glomerulonephritis (n = 4).

Aspergillus flavus induces granulomatous cerebral aspergillosis in mice with display of distinct cytokine profile

Aspergillus flavus is one of the leading Aspergillus spp. resulting in invasive aspergillosis of central nervous system (CNS) in human beings. Immunological status in aspergillosis of central nervous system remains elusive in case of both immunocompetent and immunocompromised patients. Since cytokines are the major mediators of host response, evaluation of disease pathology along with cytokine profile in brain may provide snapshots of neuro-immunological response. An intravenous model of A. flavus infection was utilized to determine the pathogenicity of infection and cytokine profile in the brain of male BALB/c mice. Enumeration of colony forming units and histopathological analyses were performed on the brain tissue at distinct time periods. The kinetics of cytokines (TNF-α, IFN-γ, IL-12/IL-23p40, IL-6, IL-23, IL-17A and IL-4) was evaluated at 6, 12, 24, 48, 72 and 96h post infection (hPI) in brain homogenates using murine cytokine specific enzyme linked immunosorbent assay. Histological analysis exhibited the hyphae with leukocyte infiltrations leading to formation of granulomata along with ischemia and pyknosis of neurons in the brain of infected mice. Diseased mice displayed increased secretion of IFN-γ, IL-12p40 and IL-6 with a concomitant reduction in the secretion of Th2 cytokine IL-4, and Th17 promoting cytokine, IL-23 during the late phase of infection. A.flavus induced inflammatory granulomatous cerebral aspergillosis in mice, characterized by a marked increase in the Th1 cytokines and neurons undergoing necrosis. A marked increase in necrosis of neurons with concurrent inflammatory responses might have led to the host mortality during late phase of infection.

Evidence of b-jet quenching in PbPb collisions at √(s(NN))=2.76 TeV

The production of jets associated to bottom quarks is measured for the first time in PbPb collisions at a center-of-mass energy of 2.76 TeV per nucleon pair. Jet spectra are reported in the transverse momentum (p(T)) range of 80-250  GeV/c, and within pseudorapidity |η|<2. The nuclear modification factor (R(AA)) calculated from these spectra shows a strong suppression in the b-jet yield in PbPb collisions relative to the yield observed in pp collisions at the same energy. The suppression persists to the largest values of p(T) studied, and is centrality dependent. The R(AA) is about 0.4 in the most central events, similar to previous observations for inclusive jets. This implies that jet quenching does not have a strong dependence on parton mass and flavor in the jet p(T) range studied.

Observation of the associated production of a single top quark and a W boson in pp collisions at sqrt[s] = 8 TeV

The first observation of the associated production of a single top quark and a W boson is presented. The analysis is based on a data set corresponding to an integrated luminosity of 12.2 fb(-1) of proton-proton collisions at sqrt[s] = 8 TeV recorded by the CMS experiment at the LHC. Events with two leptons and a jet originating from a b quark are selected. A multivariate analysis based on kinematic and topological properties is used to separate the signal from the dominant tt background. An excess consistent with the signal hypothesis is observed, with a significance which corresponds to 6.1 standard deviations above a background-only hypothesis. The measured production cross section is 23.4 ± 5.4 pb, in agreement with the standard model prediction.

Measurement of inclusive W and Z boson production cross sections in pp collisions at sqrt[s] = 8 TeV

A measurement of total and fiducial inclusive W and Z boson production cross sections in pp collisions at sqrt[s] = 8 TeV is presented. Electron and muon final states are analyzed in a data sample collected with the CMS detector corresponding to an integrated luminosity of 18.2 ± 0.5 pb(-1). The measured total inclusive cross sections times branching fractions are σ(pp → WX)×B(W → ℓν) = 12.21 ± 0.03(stat) ± 0.24(syst) ± 0.32(lum) nb and σ(pp → ZX) × B(Z → ℓ+ℓ-) = 1.15 ± 0.01(stat) ± 0.02(syst) ± 0.03(lum) nb for the dilepton mass in the range of 60-120 GeV. The measured values agree with next-to-next-to-leading-order QCD cross section calculations. Ratios of cross sections are reported with a precision of 2%. This is the first measurement of inclusive W and Z boson production in proton-proton collisions at sqrt[s] = 8 TeV.

Giant current-perpendicular-to-plane magnetoresistance in multilayer graphene as grown on nickel

Strong magnetoresistance effects are often observed in ferromagnet-nonmagnet multilayers, which are exploited in state-of-the-art magnetic field sensing and data storage technologies. In this work we report a novel current-perpendicular-to-plane magnetoresistance effect in multilayer graphene as grown on a catalytic nickel surface by chemical vapor deposition. A negative magnetoresistance effect of ∼10(4)% has been observed, which persists even at room temperature. This effect is correlated with the shape of the 2D peak as well as with the occurrence of D peak in the Raman spectrum of the as-grown multilayer graphene. The observed magnetoresistance is extremely high as compared to other known materials systems for similar temperature and field range and can be qualitatively explained within the framework of "interlayer magnetoresistance" (ILMR).

Measurements of tt spin correlations and top-quark polarization using dilepton final states in pp collisions at sqrt[s]=7 TeV

Spin correlations and polarization in the top quark-antiquark system are measured using dilepton final states produced in pp collisions at the LHC at sqrt[s]=7  TeV. The data correspond to an integrated luminosity of 5.0  fb(-1) collected with the CMS detector. The measurements are performed using events with two oppositely charged leptons (electrons or muons), a significant imbalance in transverse momentum, and two or more jets, where at least one of the jets is identified as originating from a b quark. The spin correlations and polarization are measured through asymmetries in angular distributions of the two selected leptons, unfolded to the parton level. All measurements are found to be in agreement with predictions of the standard model.

Search for top-quark partners with charge 5/3 in the same-sign dilepton final state

A search for the production of heavy partners of the top quark with charge 5/3 is performed in events with a pair of same-sign leptons. The data sample corresponds to an integrated luminosity of 19.5 fb(-1) and was collected at sqrt[s] = 8 TeV by the CMS experiment. No significant excess is observed in the data above the expected background, and the existence of top-quark partners with masses below 800 GeV is excluded at a 95% confidence level, assuming they decay exclusively to tW. This is the first limit on these particles from the LHC, and it is significantly more restrictive than previous limits.

Search for flavor-changing neutral currents in top-quark decays t → Zq in pp collisions at sqrt[s] = 8 TeV

A search for flavor-changing neutral currents in top-quark decays t → Zq is performed in events produced from the decay chain tt → Zq+Wb, where both vector bosons decay leptonically, producing a final state with three leptons (electrons or muons). A data set collected with the CMS detector at the LHC is used, corresponding to an integrated luminosity of 19.7 fb(-1) of proton-proton collisions at a center-of-mass energy of 8 TeV. No excess is seen in the observed number of events relative to the standard model prediction; thus, no evidence for flavor-changing neutral currents in top-quark decays is found. A combination with a previous search at 7 TeV excludes a t → Zq branching fraction greater than 0.05% at the 95% confidence level.

Search for top squark and Higgsino production using diphoton Higgs boson decays

Results are presented of a search for a "natural" supersymmetry scenario with gauge mediated symmetry breaking. It is assumed that only the supersymmetric partners of the top quark (the top squark) and the Higgs boson (Higgsino) are accessible. Events are examined in which there are two photons forming a Higgs boson candidate, and at least two b-quark jets. In 19.7  fb-1 of proton-proton collision data at s=8  TeV, recorded in the CMS experiment, no evidence of a signal is found and lower limits at the 95% confidence level are set, excluding the top squark mass below 360 to 410 GeV, depending on the Higgsino mass.