Processing of surfactant templated nano-structured silica films using compressed carbon dioxide as interpreted from in situ fluorescence spectroscopy

The local environment and dynamics of compressed carbon dioxide (CO(2)) penetration in surfactant templated silica film synthesis is interpreted from the in situ fluorescence emission spectra of pyrene (Py) and a modified pyrene probe. Pyrene emission in cetyltrimethylammonium bromide (CTAB) and cetylpyridinium bromide (CPB) templated silica films is monitored immediately after casting and during processing with gaseous and supercritical (sc) CO(2) (17-172 bar, 45 °C). The solvatochromic emission spectra of pyrene in CTAB templated films suggest CO(2) penetration in both the micelle interface and its interior. An anchored derivative of pyrene, 1-pyrenehexadecanoic acid (C(16)-pyr), is established for probing CPB films, where the pyrene moiety is preferentially oriented toward the micelle interior, thus limiting quenching by the pyridinium headgroup of CPB. CO(2) processing of CPB templated silica films results in an increase in the time scale for probe mobility, suggesting an increased time scale of silica condensation through CO(2) processing. The mobility of C(16)-pyr increases with pressure from gaseous to sc CO(2) processing and persists for over 5 h for sc CO(2) processing at 172 bar and 45 °C compared to about 25 min for the unprocessed film. The delivery of CO(2) soluble solutes to specific regions of surfactant templated mesoporous materials is examined via the nonradiative energy transfer (NRET) between pyrene and CO(2)-solubilized naphthalene.

Metabolic control of Clostridium thermocellum via inhibition of hydrogenase activity and the glucose transport rate

Clostridium thermocellum has the ability to catabolize cellulosic biomass into ethanol, but acetic acid, lactic acid, carbon dioxide, and hydrogen gas (H(2)) are also produced. The effect of hydrogenase inhibitors (H(2), carbon monoxide (CO), and methyl viologen) on product selectivity was investigated. The anticipated effect of these hydrogenase inhibitors was to decrease acetate production. However, shifts to ethanol and lactate production are also observed as a function of cultivation conditions. When the sparge gas of cellobiose-limited chemostat cultures was switched from N(2) to H(2), acetate declined, and ethanol production increased 350%. In resting cell suspensions, lactate increased when H(2) or CO was the inhibitor or when the cells were held at elevated hyperbaric pressure (6.8 atm). In contrast, methyl-viologen-treated resting cells produced twice as much ethanol as the other treatments. The relationship of chemostat physiology to methyl viologen inhibition was revealed by glucose transport experiments, in which methyl viologen decreased the rate of glucose transport by 90%. C. thermocellum produces NAD(+) from NADH by H(2), lactate, and ethanol production. When the hydrogenases were inhibited, the latter two products increased. However, excess substrate availability causes fructose 1,6-diphosphate, the glycolytic intermediate that triggers lactate production, to increase. Compensatory ethanol production was observed when the chemostat fluid dilution rate or methyl viologen decreased substrate transport. This research highlights the complex effects of high concentrations of dissolved gases in fermentation, which are increasingly envisioned in microbial applications of H(2) production for the conversion of synthetic gases to chemicals.

Synthesis, thermal properties, and cytotoxicity evaluation of hydrocarbon and fluorocarbon alkyl β-D-xylopyranoside surfactants

Alkyl β-d-xylopyranosides are highly surface active, biodegradable surfactants that can be prepared from hemicelluloses and are of interest for use as pharmaceuticals, detergents, agrochemicals, and personal care products. To gain further insights into their structure-property and structure-activity relationships, the present study synthesized a series of hydrocarbon (-C(6)H(13) to -C(16)H(33)) and fluorocarbon (-(CH(2))(2)C(6)F(13)) alkyl β-d-xylopyranosides in four steps from d-xylose by acylation or benzoylation, bromination, Koenigs-Knorr reaction, and hydrolysis, with the benzoyl protecting group giving better yields compared to the acyl group in the Koenigs-Knorr reaction. All alkyl β-d-xylopyranosides formed thermotropic liquid crystals. The phase transition of the solid crystalline phase to a liquid crystalline phase increased linearly with the length of the hydrophobic tail. The clearing points were near constant for alkyl β-d-xylopyranosides with a hydrophobic tail ⩾8, but occurred at a significantly lower temperature for hexyl β-d-xylopyranoside. Short and long-chain alkyl β-d-xylopyranosides displayed no cytotoxicity at concentration below their aqueous solubility limit. Hydrocarbon and fluorocarbon alkyl β-d-xylopyranosides with intermediate chain length displayed some toxicity at millimolar concentrations due to apoptosis.

Fluorinated Surfactant Templating of Ordered Nanoporous Silica

We will describe the first synthesis of ordered mesoporous silica using a fluorinated surfactant template. Nitrogen adsorption, x-ray diffraction and TEM results will be presented that show that at room temperature, we form particles with well-ordered 2D hexagonal pores using a cationic surfactant with a partially fluorinated octyl (C8) tail. The pore diameter determined by the inflection in the nitrogen adsorption isotherm is on the order of 2.6 nm and the pore size distribution is very narrow. Consistent diameters are found with a modified Kelvin equation approach and with nonlocal density functional theory. The same pore size and long-range order are found for a range of surfactant to silica ratios.

Fluorophilicity of Alkyl and Polyfluoroalkyl 1 Nicotinic Acid Ester Prodrugs

The fluorophilicity of a series of hydrocarbon and fluorocarbon-functionalized nicotinic acid esters (nicotinates) is measured from their partitioning behavior (log K(P)) in the biphasic solvent system of perfluoro(methylcyclohexane) (PFMC) and toluene. The chain length of the hydrocarbon or fluorocarbon alkyl group of the ester ranges from one to twelve carbon atoms. Knowledge of the fluorophilicity of these solutes is relevant to the design of these prodrugs for fluorocarbon-based drug delivery. The experimental log K(p) values range from -1.72 to -3.40 for the hydrocarbon nicotinates and -1.64 to 0.13 for the fluorinated nicotinates, where only the prodrug with the longest fluorinated chain (2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-pentadecafluorooctyl nicotinic acid ester) partitions preferentially into the fluorinated phase (log K(p) = 0.13). Predictions of the partition coefficients using solubility parameters calculated from group contribution techniques or molecular dynamics simulation are in reasonable agreement for the perhydrocarbon nicotinates and short chained perfluorinated nicotinates (≈ 0.3%-39% deviation). Significant deviations from experimental partition coefficients (greater than 100%) are observed for the longest chain perfluoroalkyl nicotinates.

Partitioning of homologous nicotinic acid ester prodrugs (nicotinates) into dipalmitoylphosphatidylcholine (DPPC) membrane bilayers

The partitioning behavior of a series of perhydrocarbon nicotinic acid esters (nicotinates) between aqueous solution and dipalmitoylphosphatidylcholine (DPPC) membrane bilayers is investigated as a function of increasing alkyl chain length. The hydrocarbon nicotinates represent putative prodrugs, derivatives of the polar drug nicotinic acid, whose functionalization provides the hydrophobic character necessary for pulmonary delivery in a hydrophobic, fluorocarbon solvent, such as perfluorooctyl bromide. Independent techniques of differential scanning calorimetry and 1,6-diphenyl-1,3,5-hexatriene (DPH) fluorescence anisotropy measurements are used to analyze the thermotropic phase behavior and lipid bilayer fluidity as a function of nicotinate concentration. At increasing concentrations of nicotinates over the DPPC mole fraction range examined (X(DPPC)=0.6-1.0), all the nicotinates (ethyl (C2H5); butyl (C4H9); hexyl (C6H13); and octyl (C8H17)) partition into the lipid bilayer at sufficient levels to eliminate the pretransition, and decrease and broaden the gel to fluid phase transition temperature. The concentration at which these effects occur is chain length-dependent; the shortest chain nicotinate, C2H5, elicits the least dramatic response. Similarly, the DPH anisotropy results demonstrate an alteration of the bilayer organization in the liposomes as a consequence of the chain length-dependent partitioning of the nicotinates into DPPC bilayers. The membrane partition coefficients (logarithm values), determined from the depressed bilayer phase transition temperatures, increase from 2.18 for C2H5 to 5.25 for C8H17. The DPPC membrane/water partitioning of the perhydrocarbon nicotinate series correlates with trends in the octanol/water partitioning of these solutes, suggesting that their incorporation into the bilayer is driven by increasing hydrophobicity.

Synthesis and Solid State Structure of Fluorous Probe Molecules for Fluorous Separation Applications

A series of colored hydrocarbon and fluorocarbon tagged 1-fluoro-4-alkylamino-anthraquinones and 1,4-bis-alkylamino-anthraquinone probe molecules were synthesized from a (fluorinated) alkyl amine and 1,4-difluoroanthraquinone to aid in the development of fluorous separation applications. The anthraquinones displayed stacking of the anthraquinone tricycle and interdigitation of the (fluorinated) alkyl chains in the solid state. Furthermore, intramolecular N-H···O hydrogen bonds forced the hydrocarbon and fluorocarbon tags into a conformation pointing away from the anthraquinone tricycle, with the angle of the tricycle plane normal and the main (fluorinated) alkyl vector ranging from 1 to 39°. Separation of the probe molecules on fluorous silica gel showed that the degree of fluorination of the probe molecules plays only a minor role with most eluents (e.g., hexane-ethyl acetate and methyl nonafluorobutyl ethers-ethyl acetate). However, toluene as eluent caused a pronounced separation by degree of fluorination for fluorocarbon, but not hydrocarbon tagged probe molecules on both silica gel and fluorous silica gel. These studies suggest that hydrocarbon and fluorocarbon tagged anthraquinones are useful probe molecules for the development of laboratory scale fluorous separation applications.

Synthesis and tuning of bimodal mesoporous silica by combined hydrocarbon/fluorocarbon surfactant templating

Hydrocarbon and fluorocarbon surfactants show highly nonideal mixing that under some conditions results in demixing of the two types of surfactants into distinct populations of fluorocarbon-rich and hydrocarbon-rich aggregates. This also occurs in materials prepared by cooperative assembly of hydrolyzed tetraethoxysilane with mixtures of cetyltrimethylammonium chloride (CTAC) and 1,1,2,2-tetrahydro-perfluorodecylpyridinium chloride (HFDePC). Here, we report conditions under which demixed micelles lead to bimodal mesoporous materials (including specific concentrations of ammonia and salt in the synthesis solution) and show that the sizes of the hydrocarbon-templated and fluorocarbon-templated pores can be finely and independently controlled by adding lipophilic or fluorophilic oils, respectively. Nitrogen sorption isotherms and transmission electron microscopy provide clear evidence for a single phase of demixed but disordered wormhole-like pores.

Hydrophobic tail length, degree of fluorination and headgroup stereochemistry are determinants of the biocompatibility of (fluorinated) carbohydrate surfactants

A series of hydrocarbon and fluorocarbon carbohydrate surfactants with different headgroups (i.e., gluco-, galacto- and maltopyranoside) and (fluorinated) alkyl tails (i.e., C7 and C14 to C19) was synthesized to investigate trends in their cytotoxicity and haemolytic activity, and how surfactant-lipid interactions of selected surfactants contribute to these two measures of biocompatibility. All surfactants displayed low cytotoxicity (EC50 = 25 to >250 microM) and low haemolytic activity (EC50 = 0.2 to >3.3 mM), with headgroup structure, tail length and degree of fluorination being important structural determinants for both endpoints. The EC50 values of hydrocarbon and fluorocarbon glucopyranoside surfactants displayed a "cut-off" effect (i.e., a maximum with respect to the chain length). According to steady-state fluorescence anisotropy studies, short chain (C7) surfactants partitioned less readily into model membranes, which explains their low cytotoxicity and haemolytic activity. Interestingly, galactopyranosides were less toxic compared to glucopyranosides with the same hydrophobic tail. Although both surfactant types only differ in the stereochemistry of the 4-OH group, hexadecyl gluco- and galactopyranoside surfactants had similar apparent membrane partition coefficients, but differed in their overall effect on the phase behaviour of DPPC model membranes, as assessed using steady-state fluorescence anisotropy studies. These observations suggest that highly selective surfactant-lipid interactions may be responsible for the differential cytotoxicity and, possible, haemolytic activity of hydrocarbon and fluorocarbon carbohydrate surfactants intended for a variety of pharmaceutical and biomedical applications.

Synthesis, physicochemical properties and in vitro cytotoxicity of nicotinic acid ester prodrugs intended for pulmonary delivery using perfluorooctyl bromide as vehicle

This study explores perfluorooctyl bromide (PFOB) as a potential vehicle for the pulmonary delivery of a series of prodrugs of nicotinic acid using cell culture studies. The prodrugs investigated have PFOB-water (logK(p)=0.78 to >2.2), perfluoromethylcyclohexane-toluene (logK(p)=-2.62 to 0.13) and octanol-water (logK(p)=0.90-10.2) partition coefficients spanning several orders of magnitude. In confluent NCI-H358 human lung cancer cells, the toxicity of prodrugs administered in culture medium or PFOB depends on the medium of administration, with EC20's above 8 mM and 2.5 mM for culture medium and PFOB, respectively. Short-chain nicotinates administered both in PFOB and medium increase cellular NAD/NADP levels at 1mM nicotinate concentrations. Long-chain nicotinates, which could not be administered in medium due to their poor aqueous solubility, increased NAD/NADP levels if administered in PFOB at concentrations > or =10 mM. These findings suggest that even highly lipophilic prodrugs can partition out of the PFOB phase into cells, where nicotinic acid is released and converted to NAD. Thus, PFOB may be a novel and biocompatible vehicle for the delivery of lipophilic prodrugs of nicotinic acid and other drugs directly to the lung of laboratory animals and humans.

Tailoring Porous Silica Films through Supercritical Carbon Dioxide Processing of Fluorinated Surfactant Templates

The tailoring of porous silica thin films synthesized using perfluoroalkylpyridinium chloride surfactants as templating agents is achieved as a function of carbon dioxide processing conditions and surfactant tail length and branching. Well-ordered films with 2D hexagonal close-packed pore structure are obtained from sol-gel synthesis using the following cationic fluorinated surfactants as templates: 1-(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluoro-octyl)pyridinium chloride (HFOPC), 1-(3,3,4,4,5,5,6,6,7,8,8,8-dodecafluoro-7-trifluoromethyl -octyl)pyridinium chloride (HFDoMePC), and 1-(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluoro-decyl)pyridinium chloride (HFDePC). Processing the sol-gel film with CO2 (69-172 bar, 25 and 45 degrees C) immediately after coating results in significant increases in pore diameter relative to the unprocessed thin films (increasing from 20% to 80% depending on surfactant template and processing conditions). Pore expansion increases with CO2 processing pressure, surfactant tail length, and surfactant branching. The varying degree of CO2 induced expansion is attributed to the solvation of the "CO2-philic" fluorinated tail and is interpreted from interfacial behavior of HFOPC, HFDoMePC, and HFDePC at the CO2-water interface.

Mixing of perfluorooctanesulfonic acid (PFOS) potassium salt with dipalmitoyl phosphatidylcholine (DPPC)

Perfluorooctane-1-sulfonic acid (PFOS) is emerging as an important persistent environmental pollutant. To gain insight into the interaction of PFOS with biological systems, the mixing behavior of dipalmitoylphosphatidylcholine (DPPC) with PFOS was studied using differential scanning calorimetry (DSC) and fluorescence anisotropy measurements. In the DSC experiments the onset temperature of the DPPC pretransition (Tp) decreased with increasing PFOS concentration, disappearing at XDPPC < or = 0.97. The main DPPC phase transition temperature showed a depression and peak broadening with increasing mole fraction of PFOS in both the DSC and the fluorescence anisotropy studies. From the melting point depression in the fluorescence anisotropy studies, which was observed at a concentration as low as 10 mg/L, an apparent partition coefficient of K = 5.7 x 10(4) (mole fraction basis) was calculated. These results suggest that PFOS has a high tendency to partition into lipid bilayers. These direct PFOS-DPPC interactions are one possible mechanism by which PFOS may contribute to adverse effects, for example neonatal mortality, in laboratory studies and possibly in humans.

Surface Activity of Lysozyme and Dipalmitoyl Phosphatidylcholine Vesicles at Compressed and Supercritical Fluid Interfaces

The surface activities of lysozyme and dipalmitoyl phosphatidylcholine (DPPC) vesicles at aqueous/compressed fluid interfaces are examined via high-pressure interfacial tension measurements using the pendant drop technique. The density and interfacial tension in compressible fluid systems vary significantly with pressure, providing a versatile medium for elucidating interactions between biomolecules and fluid interfaces and a method to elicit pressure-dependent interfacial morphological responses. The effects of lysozyme concentration (0.0008, 0.01, and 1 mg/mL) and pressure (> or = 7 MPa) on the dynamic surface response in the presence of ethane, propane, N2, and CO2 at 298 K were examined. Interfacial lysozyme adsorption reduced the induction phase and quickly led to interfacial tensions consistent with protein conformational changes and monolayer saturation at the compressed fluid interfaces. Protein adsorption, as indicated by surface pressure, correlated with calculated Hamaker constants for the compressed gases, denoting the importance of dispersion interactions. For DPPC at aqueous/compressed or aqueous/supercritical CO2 interfaces (1.8-20.7 MPa, 308 K), 2-3-fold reductions in interfacial tension were observed relative to the pure binary fluid system. The resulting surface pressures infer pressure-dependent morphological changes within the DPPC monolayer.

Unusual Dependence of Particle Architecture on Surfactant Concentration in Partially Fluorinated Decylpyridinium Templated Silica

A series of porous silica particles is prepared with different concentrations of the fluorinated cationic surfactant 1-(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10)-heptadecafluorodecyl)pyridinium chloride (HFDePC) to trace the changes in pore structure and particle morphology as the surfactant concentration increases. At the lowest concentration studied (1.5 mmol/L), the product consists of small round particles with close-packed cylindrical mesopores. As the HFDePC concentration increases, macroporous voids are introduced to create multi-chambered hollow particles with mesoporous walls. With a still higher concentration of HFDePC the macropore volume decreases, and elongated, tactoid-like nanoparticles are formed with random mesh-phase pores oriented with silica layers perpendicular to the main axis of the particles. Further increasing the concentration of HFDePC eventually leads to the formation of round particles with disordered pores. These changes are consistent with increasing HFDePC concentration favoring increasingly oblate or disklike micelles. The process of forming the elongated particles with random mesh-phase structure is investigated by TEM of chilled and dried samples. The results indicate that the oriented tactoid-like structure forms spontaneously within 2 min by co-assembly of silica and HFDePC rather than by preferred growth perpendicular to the layers. The particle shape and layer orientation are consistent with what would be expected for a liquid-crystal particle with orientation-dependent surface tension. Finally, we compare samples prepared with a high HFDePC and with good or poor mixing. With inadequate mixing, a gel layer forms at the top of the sample which is composed of elongated mesoporous particles with a thick coating of microporous silica. The lower particulate phase contains small disordered particles similar to those obtained in a well-mixed sample. Presumably, the structure of the upper layer results from initial immiscibility of the precursor and slow diffusion of silicates out of the gel.

Supercritical carbon dioxide processing of fluorinated surfactant templated mesoporous silica thin films

The effect of processing mesoporous silica thin films with supercritical CO2 immediately after casting is investigated, with a goal of using the penetration of CO2 molecules in the tails of fluorinated surfactant templates to tailor the final pore size. Well-ordered films with two-dimensional hexagonal close-packed pore structure are synthesized using a cationic fluorinated surfactant, 1-(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluorodecyl)pyridinium chloride, as a templating agent. Hexagonal mesopore structures are obtained for both unprocessed films and after processing the cast films in CO2 at constant pressure (69-172 bar) and temperature (25-45 degrees C) for 72 h, followed by traditional heat treatment steps. X-ray diffraction and transmission electron microscopy analysis reveal significant increases in pore size for all CO2-treated thin films (final pore diameter up to 4.22 +/- 0.14 nm) relative to the unprocessed sample (final pore diameter of 2.21 +/- 0.20 nm) before surfactant extraction. Similar pore sizes are obtained with liquid and supercritical fluid treatments over the range of conditions tested. These results demonstrate that combining the tunable solvent strength of compressed and supercritical CO2 with the "CO2-philic" nature of fluorinated tails allows one to use CO2 processing to control the pore size in ordered mesoporous silica films.

Large- and small-nanopore silica prepared with a short-chain cationic fluorinated surfactant

A cationic partially fluorinated surfactant with four carbons in the chain 1-(3,3,4,4,4-pentafluorobutyl)pyridinium chloride is employed as a structure-directing agent to synthesize nanoporous silica. Samples are prepared in dilute ammonia solutions at room temperature with a range of surfactant:Si ratios. The sample with the largest surfactant:Si ratio forms particles with wormhole-like micropores with an average diameter of 1.6 nm, which corresponds to the anticipated small size of the surfactant aggregates. On the other hand, the sample with the smallest surfactant:Si ratio forms a gel that, upon drying, has uniform 11.1 nm pores. The formation and stabilization of the latter large-mesopore structure is unusual for a sample prepared and dried under ambient conditions, and may reflect favourable roles of the surfactant both in inducing gelation and in stabilizing the pore structure during drying.

Liposome fluidization and melting point depression by pressurized CO2 determined by fluorescence anisotropy

The influence of CO2 on the bilayer fluidity of liposomes, which are representative of model cellular membranes, was examined for the first time at the elevated pressures (up to 13.9 MPa) associated with CO2-based processing of liposomes and microbial sterilization. Fluidization and melting point depression of aqueous dipalmitoylphosphatidylcholine (DPPC) liposomes by pressurized CO2 (present as an excess phase) were studied by steady-state fluorescence anisotropy using the membrane probe 1,6-diphenyl-1,3,5-hexatriene (DPH). Isothermal experiments revealed reversible, pressure-dependent fluidization of DPPC bilayers at temperatures corresponding to near-gel (295 K) and fluid (333 K) phases at atmospheric pressure, where the gel-to-fluid phase transition (Tm) occurs at approximately 315 K. Isobaric measurements (PCO2 =1.8, 7.0, and 13.9 MPa) of DPH anisotropy demonstrate substantial melting point depression (DeltaTm = -4.8 to -18.5 K) and a large broadening of the gel-fluid phase transition region, which were interpreted using conventional theories of melting point depression. Liposome fluidity is influenced by CO2 accumulation in the hydrocarbon core and polar headgroup region, as well as the formation of carbonic acid and/or the presence of buffering species under elevated CO2 pressure.